| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <linuxwifi@intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| #include <net/mac80211.h> |
| |
| #include "iwl-trans.h" |
| #include "iwl-op-mode.h" |
| #include "iwl-fw.h" |
| #include "iwl-debug.h" |
| #include "iwl-csr.h" /* for iwl_mvm_rx_card_state_notif */ |
| #include "iwl-io.h" /* for iwl_mvm_rx_card_state_notif */ |
| #include "iwl-prph.h" |
| #include "iwl-eeprom-parse.h" |
| |
| #include "mvm.h" |
| #include "fw-dbg.h" |
| #include "iwl-phy-db.h" |
| |
| #define MVM_UCODE_ALIVE_TIMEOUT HZ |
| #define MVM_UCODE_CALIB_TIMEOUT (2*HZ) |
| |
| #define UCODE_VALID_OK cpu_to_le32(0x1) |
| |
| struct iwl_mvm_alive_data { |
| bool valid; |
| u32 scd_base_addr; |
| }; |
| |
| static inline const struct fw_img * |
| iwl_get_ucode_image(struct iwl_mvm *mvm, enum iwl_ucode_type ucode_type) |
| { |
| if (ucode_type >= IWL_UCODE_TYPE_MAX) |
| return NULL; |
| |
| return &mvm->fw->img[ucode_type]; |
| } |
| |
| static int iwl_send_tx_ant_cfg(struct iwl_mvm *mvm, u8 valid_tx_ant) |
| { |
| struct iwl_tx_ant_cfg_cmd tx_ant_cmd = { |
| .valid = cpu_to_le32(valid_tx_ant), |
| }; |
| |
| IWL_DEBUG_FW(mvm, "select valid tx ant: %u\n", valid_tx_ant); |
| return iwl_mvm_send_cmd_pdu(mvm, TX_ANT_CONFIGURATION_CMD, 0, |
| sizeof(tx_ant_cmd), &tx_ant_cmd); |
| } |
| |
| static void iwl_free_fw_paging(struct iwl_mvm *mvm) |
| { |
| int i; |
| |
| if (!mvm->fw_paging_db[0].fw_paging_block) |
| return; |
| |
| for (i = 0; i < NUM_OF_FW_PAGING_BLOCKS; i++) { |
| if (!mvm->fw_paging_db[i].fw_paging_block) { |
| IWL_DEBUG_FW(mvm, |
| "Paging: block %d already freed, continue to next page\n", |
| i); |
| |
| continue; |
| } |
| |
| __free_pages(mvm->fw_paging_db[i].fw_paging_block, |
| get_order(mvm->fw_paging_db[i].fw_paging_size)); |
| } |
| kfree(mvm->trans->paging_download_buf); |
| memset(mvm->fw_paging_db, 0, sizeof(mvm->fw_paging_db)); |
| } |
| |
| static int iwl_fill_paging_mem(struct iwl_mvm *mvm, const struct fw_img *image) |
| { |
| int sec_idx, idx; |
| u32 offset = 0; |
| |
| /* |
| * find where is the paging image start point: |
| * if CPU2 exist and it's in paging format, then the image looks like: |
| * CPU1 sections (2 or more) |
| * CPU1_CPU2_SEPARATOR_SECTION delimiter - separate between CPU1 to CPU2 |
| * CPU2 sections (not paged) |
| * PAGING_SEPARATOR_SECTION delimiter - separate between CPU2 |
| * non paged to CPU2 paging sec |
| * CPU2 paging CSS |
| * CPU2 paging image (including instruction and data) |
| */ |
| for (sec_idx = 0; sec_idx < IWL_UCODE_SECTION_MAX; sec_idx++) { |
| if (image->sec[sec_idx].offset == PAGING_SEPARATOR_SECTION) { |
| sec_idx++; |
| break; |
| } |
| } |
| |
| if (sec_idx >= IWL_UCODE_SECTION_MAX) { |
| IWL_ERR(mvm, "driver didn't find paging image\n"); |
| iwl_free_fw_paging(mvm); |
| return -EINVAL; |
| } |
| |
| /* copy the CSS block to the dram */ |
| IWL_DEBUG_FW(mvm, "Paging: load paging CSS to FW, sec = %d\n", |
| sec_idx); |
| |
| memcpy(page_address(mvm->fw_paging_db[0].fw_paging_block), |
| image->sec[sec_idx].data, |
| mvm->fw_paging_db[0].fw_paging_size); |
| |
| IWL_DEBUG_FW(mvm, |
| "Paging: copied %d CSS bytes to first block\n", |
| mvm->fw_paging_db[0].fw_paging_size); |
| |
| sec_idx++; |
| |
| /* |
| * copy the paging blocks to the dram |
| * loop index start from 1 since that CSS block already copied to dram |
| * and CSS index is 0. |
| * loop stop at num_of_paging_blk since that last block is not full. |
| */ |
| for (idx = 1; idx < mvm->num_of_paging_blk; idx++) { |
| memcpy(page_address(mvm->fw_paging_db[idx].fw_paging_block), |
| image->sec[sec_idx].data + offset, |
| mvm->fw_paging_db[idx].fw_paging_size); |
| |
| IWL_DEBUG_FW(mvm, |
| "Paging: copied %d paging bytes to block %d\n", |
| mvm->fw_paging_db[idx].fw_paging_size, |
| idx); |
| |
| offset += mvm->fw_paging_db[idx].fw_paging_size; |
| } |
| |
| /* copy the last paging block */ |
| if (mvm->num_of_pages_in_last_blk > 0) { |
| memcpy(page_address(mvm->fw_paging_db[idx].fw_paging_block), |
| image->sec[sec_idx].data + offset, |
| FW_PAGING_SIZE * mvm->num_of_pages_in_last_blk); |
| |
| IWL_DEBUG_FW(mvm, |
| "Paging: copied %d pages in the last block %d\n", |
| mvm->num_of_pages_in_last_blk, idx); |
| } |
| |
| return 0; |
| } |
| |
| static int iwl_alloc_fw_paging_mem(struct iwl_mvm *mvm, |
| const struct fw_img *image) |
| { |
| struct page *block; |
| dma_addr_t phys = 0; |
| int blk_idx = 0; |
| int order, num_of_pages; |
| int dma_enabled; |
| |
| if (mvm->fw_paging_db[0].fw_paging_block) |
| return 0; |
| |
| dma_enabled = is_device_dma_capable(mvm->trans->dev); |
| |
| /* ensure BLOCK_2_EXP_SIZE is power of 2 of PAGING_BLOCK_SIZE */ |
| BUILD_BUG_ON(BIT(BLOCK_2_EXP_SIZE) != PAGING_BLOCK_SIZE); |
| |
| num_of_pages = image->paging_mem_size / FW_PAGING_SIZE; |
| mvm->num_of_paging_blk = ((num_of_pages - 1) / |
| NUM_OF_PAGE_PER_GROUP) + 1; |
| |
| mvm->num_of_pages_in_last_blk = |
| num_of_pages - |
| NUM_OF_PAGE_PER_GROUP * (mvm->num_of_paging_blk - 1); |
| |
| IWL_DEBUG_FW(mvm, |
| "Paging: allocating mem for %d paging blocks, each block holds 8 pages, last block holds %d pages\n", |
| mvm->num_of_paging_blk, |
| mvm->num_of_pages_in_last_blk); |
| |
| /* allocate block of 4Kbytes for paging CSS */ |
| order = get_order(FW_PAGING_SIZE); |
| block = alloc_pages(GFP_KERNEL, order); |
| if (!block) { |
| /* free all the previous pages since we failed */ |
| iwl_free_fw_paging(mvm); |
| return -ENOMEM; |
| } |
| |
| mvm->fw_paging_db[blk_idx].fw_paging_block = block; |
| mvm->fw_paging_db[blk_idx].fw_paging_size = FW_PAGING_SIZE; |
| |
| if (dma_enabled) { |
| phys = dma_map_page(mvm->trans->dev, block, 0, |
| PAGE_SIZE << order, DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(mvm->trans->dev, phys)) { |
| /* |
| * free the previous pages and the current one since |
| * we failed to map_page. |
| */ |
| iwl_free_fw_paging(mvm); |
| return -ENOMEM; |
| } |
| mvm->fw_paging_db[blk_idx].fw_paging_phys = phys; |
| } else { |
| mvm->fw_paging_db[blk_idx].fw_paging_phys = PAGING_ADDR_SIG | |
| blk_idx << BLOCK_2_EXP_SIZE; |
| } |
| |
| IWL_DEBUG_FW(mvm, |
| "Paging: allocated 4K(CSS) bytes (order %d) for firmware paging.\n", |
| order); |
| |
| /* |
| * allocate blocks in dram. |
| * since that CSS allocated in fw_paging_db[0] loop start from index 1 |
| */ |
| for (blk_idx = 1; blk_idx < mvm->num_of_paging_blk + 1; blk_idx++) { |
| /* allocate block of PAGING_BLOCK_SIZE (32K) */ |
| order = get_order(PAGING_BLOCK_SIZE); |
| block = alloc_pages(GFP_KERNEL, order); |
| if (!block) { |
| /* free all the previous pages since we failed */ |
| iwl_free_fw_paging(mvm); |
| return -ENOMEM; |
| } |
| |
| mvm->fw_paging_db[blk_idx].fw_paging_block = block; |
| mvm->fw_paging_db[blk_idx].fw_paging_size = PAGING_BLOCK_SIZE; |
| |
| if (dma_enabled) { |
| phys = dma_map_page(mvm->trans->dev, block, 0, |
| PAGE_SIZE << order, |
| DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(mvm->trans->dev, phys)) { |
| /* |
| * free the previous pages and the current one |
| * since we failed to map_page. |
| */ |
| iwl_free_fw_paging(mvm); |
| return -ENOMEM; |
| } |
| mvm->fw_paging_db[blk_idx].fw_paging_phys = phys; |
| } else { |
| mvm->fw_paging_db[blk_idx].fw_paging_phys = |
| PAGING_ADDR_SIG | |
| blk_idx << BLOCK_2_EXP_SIZE; |
| } |
| |
| IWL_DEBUG_FW(mvm, |
| "Paging: allocated 32K bytes (order %d) for firmware paging.\n", |
| order); |
| } |
| |
| return 0; |
| } |
| |
| static int iwl_save_fw_paging(struct iwl_mvm *mvm, |
| const struct fw_img *fw) |
| { |
| int ret; |
| |
| ret = iwl_alloc_fw_paging_mem(mvm, fw); |
| if (ret) |
| return ret; |
| |
| return iwl_fill_paging_mem(mvm, fw); |
| } |
| |
| /* send paging cmd to FW in case CPU2 has paging image */ |
| static int iwl_send_paging_cmd(struct iwl_mvm *mvm, const struct fw_img *fw) |
| { |
| int blk_idx; |
| __le32 dev_phy_addr; |
| struct iwl_fw_paging_cmd fw_paging_cmd = { |
| .flags = |
| cpu_to_le32(PAGING_CMD_IS_SECURED | |
| PAGING_CMD_IS_ENABLED | |
| (mvm->num_of_pages_in_last_blk << |
| PAGING_CMD_NUM_OF_PAGES_IN_LAST_GRP_POS)), |
| .block_size = cpu_to_le32(BLOCK_2_EXP_SIZE), |
| .block_num = cpu_to_le32(mvm->num_of_paging_blk), |
| }; |
| |
| /* loop for for all paging blocks + CSS block */ |
| for (blk_idx = 0; blk_idx < mvm->num_of_paging_blk + 1; blk_idx++) { |
| dev_phy_addr = |
| cpu_to_le32(mvm->fw_paging_db[blk_idx].fw_paging_phys >> |
| PAGE_2_EXP_SIZE); |
| fw_paging_cmd.device_phy_addr[blk_idx] = dev_phy_addr; |
| } |
| |
| return iwl_mvm_send_cmd_pdu(mvm, iwl_cmd_id(FW_PAGING_BLOCK_CMD, |
| IWL_ALWAYS_LONG_GROUP, 0), |
| 0, sizeof(fw_paging_cmd), &fw_paging_cmd); |
| } |
| |
| /* |
| * Send paging item cmd to FW in case CPU2 has paging image |
| */ |
| static int iwl_trans_get_paging_item(struct iwl_mvm *mvm) |
| { |
| int ret; |
| struct iwl_fw_get_item_cmd fw_get_item_cmd = { |
| .item_id = cpu_to_le32(IWL_FW_ITEM_ID_PAGING), |
| }; |
| |
| struct iwl_fw_get_item_resp *item_resp; |
| struct iwl_host_cmd cmd = { |
| .id = iwl_cmd_id(FW_GET_ITEM_CMD, IWL_ALWAYS_LONG_GROUP, 0), |
| .flags = CMD_WANT_SKB | CMD_SEND_IN_RFKILL, |
| .data = { &fw_get_item_cmd, }, |
| }; |
| |
| cmd.len[0] = sizeof(struct iwl_fw_get_item_cmd); |
| |
| ret = iwl_mvm_send_cmd(mvm, &cmd); |
| if (ret) { |
| IWL_ERR(mvm, |
| "Paging: Failed to send FW_GET_ITEM_CMD cmd (err = %d)\n", |
| ret); |
| return ret; |
| } |
| |
| item_resp = (void *)((struct iwl_rx_packet *)cmd.resp_pkt)->data; |
| if (item_resp->item_id != cpu_to_le32(IWL_FW_ITEM_ID_PAGING)) { |
| IWL_ERR(mvm, |
| "Paging: got wrong item in FW_GET_ITEM_CMD resp (item_id = %u)\n", |
| le32_to_cpu(item_resp->item_id)); |
| ret = -EIO; |
| goto exit; |
| } |
| |
| mvm->trans->paging_download_buf = kzalloc(MAX_PAGING_IMAGE_SIZE, |
| GFP_KERNEL); |
| if (!mvm->trans->paging_download_buf) { |
| ret = -ENOMEM; |
| goto exit; |
| } |
| mvm->trans->paging_req_addr = le32_to_cpu(item_resp->item_val); |
| mvm->trans->paging_db = mvm->fw_paging_db; |
| IWL_DEBUG_FW(mvm, |
| "Paging: got paging request address (paging_req_addr 0x%08x)\n", |
| mvm->trans->paging_req_addr); |
| |
| exit: |
| iwl_free_resp(&cmd); |
| |
| return ret; |
| } |
| |
| static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, |
| struct iwl_rx_packet *pkt, void *data) |
| { |
| struct iwl_mvm *mvm = |
| container_of(notif_wait, struct iwl_mvm, notif_wait); |
| struct iwl_mvm_alive_data *alive_data = data; |
| struct mvm_alive_resp_ver1 *palive1; |
| struct mvm_alive_resp_ver2 *palive2; |
| struct mvm_alive_resp *palive; |
| |
| if (iwl_rx_packet_payload_len(pkt) == sizeof(*palive1)) { |
| palive1 = (void *)pkt->data; |
| |
| mvm->support_umac_log = false; |
| mvm->error_event_table = |
| le32_to_cpu(palive1->error_event_table_ptr); |
| mvm->log_event_table = |
| le32_to_cpu(palive1->log_event_table_ptr); |
| alive_data->scd_base_addr = le32_to_cpu(palive1->scd_base_ptr); |
| |
| alive_data->valid = le16_to_cpu(palive1->status) == |
| IWL_ALIVE_STATUS_OK; |
| IWL_DEBUG_FW(mvm, |
| "Alive VER1 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n", |
| le16_to_cpu(palive1->status), palive1->ver_type, |
| palive1->ver_subtype, palive1->flags); |
| } else if (iwl_rx_packet_payload_len(pkt) == sizeof(*palive2)) { |
| palive2 = (void *)pkt->data; |
| |
| mvm->error_event_table = |
| le32_to_cpu(palive2->error_event_table_ptr); |
| mvm->log_event_table = |
| le32_to_cpu(palive2->log_event_table_ptr); |
| alive_data->scd_base_addr = le32_to_cpu(palive2->scd_base_ptr); |
| mvm->umac_error_event_table = |
| le32_to_cpu(palive2->error_info_addr); |
| mvm->sf_space.addr = le32_to_cpu(palive2->st_fwrd_addr); |
| mvm->sf_space.size = le32_to_cpu(palive2->st_fwrd_size); |
| |
| alive_data->valid = le16_to_cpu(palive2->status) == |
| IWL_ALIVE_STATUS_OK; |
| if (mvm->umac_error_event_table) |
| mvm->support_umac_log = true; |
| |
| IWL_DEBUG_FW(mvm, |
| "Alive VER2 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n", |
| le16_to_cpu(palive2->status), palive2->ver_type, |
| palive2->ver_subtype, palive2->flags); |
| |
| IWL_DEBUG_FW(mvm, |
| "UMAC version: Major - 0x%x, Minor - 0x%x\n", |
| palive2->umac_major, palive2->umac_minor); |
| } else if (iwl_rx_packet_payload_len(pkt) == sizeof(*palive)) { |
| palive = (void *)pkt->data; |
| |
| mvm->error_event_table = |
| le32_to_cpu(palive->error_event_table_ptr); |
| mvm->log_event_table = |
| le32_to_cpu(palive->log_event_table_ptr); |
| alive_data->scd_base_addr = le32_to_cpu(palive->scd_base_ptr); |
| mvm->umac_error_event_table = |
| le32_to_cpu(palive->error_info_addr); |
| mvm->sf_space.addr = le32_to_cpu(palive->st_fwrd_addr); |
| mvm->sf_space.size = le32_to_cpu(palive->st_fwrd_size); |
| |
| alive_data->valid = le16_to_cpu(palive->status) == |
| IWL_ALIVE_STATUS_OK; |
| if (mvm->umac_error_event_table) |
| mvm->support_umac_log = true; |
| |
| IWL_DEBUG_FW(mvm, |
| "Alive VER3 ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n", |
| le16_to_cpu(palive->status), palive->ver_type, |
| palive->ver_subtype, palive->flags); |
| |
| IWL_DEBUG_FW(mvm, |
| "UMAC version: Major - 0x%x, Minor - 0x%x\n", |
| le32_to_cpu(palive->umac_major), |
| le32_to_cpu(palive->umac_minor)); |
| } |
| |
| return true; |
| } |
| |
| static bool iwl_wait_phy_db_entry(struct iwl_notif_wait_data *notif_wait, |
| struct iwl_rx_packet *pkt, void *data) |
| { |
| struct iwl_phy_db *phy_db = data; |
| |
| if (pkt->hdr.cmd != CALIB_RES_NOTIF_PHY_DB) { |
| WARN_ON(pkt->hdr.cmd != INIT_COMPLETE_NOTIF); |
| return true; |
| } |
| |
| WARN_ON(iwl_phy_db_set_section(phy_db, pkt, GFP_ATOMIC)); |
| |
| return false; |
| } |
| |
| static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm, |
| enum iwl_ucode_type ucode_type) |
| { |
| struct iwl_notification_wait alive_wait; |
| struct iwl_mvm_alive_data alive_data; |
| const struct fw_img *fw; |
| int ret, i; |
| enum iwl_ucode_type old_type = mvm->cur_ucode; |
| static const u16 alive_cmd[] = { MVM_ALIVE }; |
| struct iwl_sf_region st_fwrd_space; |
| |
| if (ucode_type == IWL_UCODE_REGULAR && |
| iwl_fw_dbg_conf_usniffer(mvm->fw, FW_DBG_START_FROM_ALIVE)) |
| fw = iwl_get_ucode_image(mvm, IWL_UCODE_REGULAR_USNIFFER); |
| else |
| fw = iwl_get_ucode_image(mvm, ucode_type); |
| if (WARN_ON(!fw)) |
| return -EINVAL; |
| mvm->cur_ucode = ucode_type; |
| mvm->ucode_loaded = false; |
| |
| iwl_init_notification_wait(&mvm->notif_wait, &alive_wait, |
| alive_cmd, ARRAY_SIZE(alive_cmd), |
| iwl_alive_fn, &alive_data); |
| |
| ret = iwl_trans_start_fw(mvm->trans, fw, ucode_type == IWL_UCODE_INIT); |
| if (ret) { |
| mvm->cur_ucode = old_type; |
| iwl_remove_notification(&mvm->notif_wait, &alive_wait); |
| return ret; |
| } |
| |
| /* |
| * Some things may run in the background now, but we |
| * just wait for the ALIVE notification here. |
| */ |
| ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait, |
| MVM_UCODE_ALIVE_TIMEOUT); |
| if (ret) { |
| if (mvm->trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) |
| IWL_ERR(mvm, |
| "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n", |
| iwl_read_prph(mvm->trans, SB_CPU_1_STATUS), |
| iwl_read_prph(mvm->trans, SB_CPU_2_STATUS)); |
| mvm->cur_ucode = old_type; |
| return ret; |
| } |
| |
| if (!alive_data.valid) { |
| IWL_ERR(mvm, "Loaded ucode is not valid!\n"); |
| mvm->cur_ucode = old_type; |
| return -EIO; |
| } |
| |
| /* |
| * update the sdio allocation according to the pointer we get in the |
| * alive notification. |
| */ |
| st_fwrd_space.addr = mvm->sf_space.addr; |
| st_fwrd_space.size = mvm->sf_space.size; |
| ret = iwl_trans_update_sf(mvm->trans, &st_fwrd_space); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to update SF size. ret %d\n", ret); |
| return ret; |
| } |
| |
| iwl_trans_fw_alive(mvm->trans, alive_data.scd_base_addr); |
| |
| /* |
| * configure and operate fw paging mechanism. |
| * driver configures the paging flow only once, CPU2 paging image |
| * included in the IWL_UCODE_INIT image. |
| */ |
| if (fw->paging_mem_size) { |
| /* |
| * When dma is not enabled, the driver needs to copy / write |
| * the downloaded / uploaded page to / from the smem. |
| * This gets the location of the place were the pages are |
| * stored. |
| */ |
| if (!is_device_dma_capable(mvm->trans->dev)) { |
| ret = iwl_trans_get_paging_item(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "failed to get FW paging item\n"); |
| return ret; |
| } |
| } |
| |
| ret = iwl_save_fw_paging(mvm, fw); |
| if (ret) { |
| IWL_ERR(mvm, "failed to save the FW paging image\n"); |
| return ret; |
| } |
| |
| ret = iwl_send_paging_cmd(mvm, fw); |
| if (ret) { |
| IWL_ERR(mvm, "failed to send the paging cmd\n"); |
| iwl_free_fw_paging(mvm); |
| return ret; |
| } |
| } |
| |
| /* |
| * Note: all the queues are enabled as part of the interface |
| * initialization, but in firmware restart scenarios they |
| * could be stopped, so wake them up. In firmware restart, |
| * mac80211 will have the queues stopped as well until the |
| * reconfiguration completes. During normal startup, they |
| * will be empty. |
| */ |
| |
| memset(&mvm->queue_info, 0, sizeof(mvm->queue_info)); |
| mvm->queue_info[IWL_MVM_CMD_QUEUE].hw_queue_refcount = 1; |
| |
| for (i = 0; i < IEEE80211_MAX_QUEUES; i++) |
| atomic_set(&mvm->mac80211_queue_stop_count[i], 0); |
| |
| mvm->ucode_loaded = true; |
| |
| return 0; |
| } |
| |
| static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) |
| { |
| struct iwl_phy_cfg_cmd phy_cfg_cmd; |
| enum iwl_ucode_type ucode_type = mvm->cur_ucode; |
| |
| /* Set parameters */ |
| phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_get_phy_config(mvm)); |
| phy_cfg_cmd.calib_control.event_trigger = |
| mvm->fw->default_calib[ucode_type].event_trigger; |
| phy_cfg_cmd.calib_control.flow_trigger = |
| mvm->fw->default_calib[ucode_type].flow_trigger; |
| |
| IWL_DEBUG_INFO(mvm, "Sending Phy CFG command: 0x%x\n", |
| phy_cfg_cmd.phy_cfg); |
| |
| return iwl_mvm_send_cmd_pdu(mvm, PHY_CONFIGURATION_CMD, 0, |
| sizeof(phy_cfg_cmd), &phy_cfg_cmd); |
| } |
| |
| int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) |
| { |
| struct iwl_notification_wait calib_wait; |
| static const u16 init_complete[] = { |
| INIT_COMPLETE_NOTIF, |
| CALIB_RES_NOTIF_PHY_DB |
| }; |
| int ret; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| if (WARN_ON_ONCE(mvm->calibrating)) |
| return 0; |
| |
| iwl_init_notification_wait(&mvm->notif_wait, |
| &calib_wait, |
| init_complete, |
| ARRAY_SIZE(init_complete), |
| iwl_wait_phy_db_entry, |
| mvm->phy_db); |
| |
| /* Will also start the device */ |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_INIT); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start INIT ucode: %d\n", ret); |
| goto error; |
| } |
| |
| ret = iwl_send_bt_init_conf(mvm); |
| if (ret) |
| goto error; |
| |
| /* Read the NVM only at driver load time, no need to do this twice */ |
| if (read_nvm) { |
| /* Read nvm */ |
| ret = iwl_nvm_init(mvm, true); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to read NVM: %d\n", ret); |
| goto error; |
| } |
| } |
| |
| /* In case we read the NVM from external file, load it to the NIC */ |
| if (mvm->nvm_file_name) |
| iwl_mvm_load_nvm_to_nic(mvm); |
| |
| ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans); |
| WARN_ON(ret); |
| |
| /* |
| * abort after reading the nvm in case RF Kill is on, we will complete |
| * the init seq later when RF kill will switch to off |
| */ |
| if (iwl_mvm_is_radio_hw_killed(mvm)) { |
| IWL_DEBUG_RF_KILL(mvm, |
| "jump over all phy activities due to RF kill\n"); |
| iwl_remove_notification(&mvm->notif_wait, &calib_wait); |
| ret = 1; |
| goto out; |
| } |
| |
| mvm->calibrating = true; |
| |
| /* Send TX valid antennas before triggering calibrations */ |
| ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); |
| if (ret) |
| goto error; |
| |
| /* |
| * Send phy configurations command to init uCode |
| * to start the 16.0 uCode init image internal calibrations. |
| */ |
| ret = iwl_send_phy_cfg_cmd(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to run INIT calibrations: %d\n", |
| ret); |
| goto error; |
| } |
| |
| /* |
| * Some things may run in the background now, but we |
| * just wait for the calibration complete notification. |
| */ |
| ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, |
| MVM_UCODE_CALIB_TIMEOUT); |
| |
| if (ret && iwl_mvm_is_radio_hw_killed(mvm)) { |
| IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); |
| ret = 1; |
| } |
| goto out; |
| |
| error: |
| iwl_remove_notification(&mvm->notif_wait, &calib_wait); |
| out: |
| mvm->calibrating = false; |
| if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) { |
| /* we want to debug INIT and we have no NVM - fake */ |
| mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) + |
| sizeof(struct ieee80211_channel) + |
| sizeof(struct ieee80211_rate), |
| GFP_KERNEL); |
| if (!mvm->nvm_data) |
| return -ENOMEM; |
| mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; |
| mvm->nvm_data->bands[0].n_channels = 1; |
| mvm->nvm_data->bands[0].n_bitrates = 1; |
| mvm->nvm_data->bands[0].bitrates = |
| (void *)mvm->nvm_data->channels + 1; |
| mvm->nvm_data->bands[0].bitrates->hw_value = 10; |
| } |
| |
| return ret; |
| } |
| |
| static void iwl_mvm_get_shared_mem_conf(struct iwl_mvm *mvm) |
| { |
| struct iwl_host_cmd cmd = { |
| .id = SHARED_MEM_CFG, |
| .flags = CMD_WANT_SKB, |
| .data = { NULL, }, |
| .len = { 0, }, |
| }; |
| struct iwl_rx_packet *pkt; |
| struct iwl_shared_mem_cfg *mem_cfg; |
| u32 i; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| if (WARN_ON(iwl_mvm_send_cmd(mvm, &cmd))) |
| return; |
| |
| pkt = cmd.resp_pkt; |
| mem_cfg = (void *)pkt->data; |
| |
| mvm->shared_mem_cfg.shared_mem_addr = |
| le32_to_cpu(mem_cfg->shared_mem_addr); |
| mvm->shared_mem_cfg.shared_mem_size = |
| le32_to_cpu(mem_cfg->shared_mem_size); |
| mvm->shared_mem_cfg.sample_buff_addr = |
| le32_to_cpu(mem_cfg->sample_buff_addr); |
| mvm->shared_mem_cfg.sample_buff_size = |
| le32_to_cpu(mem_cfg->sample_buff_size); |
| mvm->shared_mem_cfg.txfifo_addr = le32_to_cpu(mem_cfg->txfifo_addr); |
| for (i = 0; i < ARRAY_SIZE(mvm->shared_mem_cfg.txfifo_size); i++) |
| mvm->shared_mem_cfg.txfifo_size[i] = |
| le32_to_cpu(mem_cfg->txfifo_size[i]); |
| for (i = 0; i < ARRAY_SIZE(mvm->shared_mem_cfg.rxfifo_size); i++) |
| mvm->shared_mem_cfg.rxfifo_size[i] = |
| le32_to_cpu(mem_cfg->rxfifo_size[i]); |
| mvm->shared_mem_cfg.page_buff_addr = |
| le32_to_cpu(mem_cfg->page_buff_addr); |
| mvm->shared_mem_cfg.page_buff_size = |
| le32_to_cpu(mem_cfg->page_buff_size); |
| IWL_DEBUG_INFO(mvm, "SHARED MEM CFG: got memory offsets/sizes\n"); |
| |
| iwl_free_resp(&cmd); |
| } |
| |
| static int iwl_mvm_config_ltr(struct iwl_mvm *mvm) |
| { |
| struct iwl_ltr_config_cmd cmd = { |
| .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE), |
| }; |
| |
| if (!mvm->trans->ltr_enabled) |
| return 0; |
| |
| return iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0, |
| sizeof(cmd), &cmd); |
| } |
| |
| int iwl_mvm_up(struct iwl_mvm *mvm) |
| { |
| int ret, i; |
| struct ieee80211_channel *chan; |
| struct cfg80211_chan_def chandef; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| ret = iwl_trans_start_hw(mvm->trans); |
| if (ret) |
| return ret; |
| |
| /* |
| * If we haven't completed the run of the init ucode during |
| * module loading, load init ucode now |
| * (for example, if we were in RFKILL) |
| */ |
| ret = iwl_run_init_mvm_ucode(mvm, false); |
| if (ret && !iwlmvm_mod_params.init_dbg) { |
| IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); |
| /* this can't happen */ |
| if (WARN_ON(ret > 0)) |
| ret = -ERFKILL; |
| goto error; |
| } |
| if (!iwlmvm_mod_params.init_dbg) { |
| /* |
| * Stop and start the transport without entering low power |
| * mode. This will save the state of other components on the |
| * device that are triggered by the INIT firwmare (MFUART). |
| */ |
| _iwl_trans_stop_device(mvm->trans, false); |
| ret = _iwl_trans_start_hw(mvm->trans, false); |
| if (ret) |
| goto error; |
| } |
| |
| if (iwlmvm_mod_params.init_dbg) |
| return 0; |
| |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_REGULAR); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret); |
| goto error; |
| } |
| |
| iwl_mvm_get_shared_mem_conf(mvm); |
| |
| ret = iwl_mvm_sf_update(mvm, NULL, false); |
| if (ret) |
| IWL_ERR(mvm, "Failed to initialize Smart Fifo\n"); |
| |
| mvm->fw_dbg_conf = FW_DBG_INVALID; |
| /* if we have a destination, assume EARLY START */ |
| if (mvm->fw->dbg_dest_tlv) |
| mvm->fw_dbg_conf = FW_DBG_START_FROM_ALIVE; |
| iwl_mvm_start_fw_dbg_conf(mvm, FW_DBG_START_FROM_ALIVE); |
| |
| ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); |
| if (ret) |
| goto error; |
| |
| ret = iwl_send_bt_init_conf(mvm); |
| if (ret) |
| goto error; |
| |
| /* Send phy db control command and then phy db calibration*/ |
| ret = iwl_send_phy_db_data(mvm->phy_db); |
| if (ret) |
| goto error; |
| |
| ret = iwl_send_phy_cfg_cmd(mvm); |
| if (ret) |
| goto error; |
| |
| /* init the fw <-> mac80211 STA mapping */ |
| for (i = 0; i < IWL_MVM_STATION_COUNT; i++) |
| RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); |
| |
| mvm->tdls_cs.peer.sta_id = IWL_MVM_STATION_COUNT; |
| |
| /* reset quota debouncing buffer - 0xff will yield invalid data */ |
| memset(&mvm->last_quota_cmd, 0xff, sizeof(mvm->last_quota_cmd)); |
| |
| /* Add auxiliary station for scanning */ |
| ret = iwl_mvm_add_aux_sta(mvm); |
| if (ret) |
| goto error; |
| |
| /* Add all the PHY contexts */ |
| chan = &mvm->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels[0]; |
| cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT); |
| for (i = 0; i < NUM_PHY_CTX; i++) { |
| /* |
| * The channel used here isn't relevant as it's |
| * going to be overwritten in the other flows. |
| * For now use the first channel we have. |
| */ |
| ret = iwl_mvm_phy_ctxt_add(mvm, &mvm->phy_ctxts[i], |
| &chandef, 1, 1); |
| if (ret) |
| goto error; |
| } |
| |
| /* Initialize tx backoffs to the minimal possible */ |
| iwl_mvm_tt_tx_backoff(mvm, 0); |
| |
| WARN_ON(iwl_mvm_config_ltr(mvm)); |
| |
| ret = iwl_mvm_power_update_device(mvm); |
| if (ret) |
| goto error; |
| |
| /* |
| * RTNL is not taken during Ct-kill, but we don't need to scan/Tx |
| * anyway, so don't init MCC. |
| */ |
| if (!test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status)) { |
| ret = iwl_mvm_init_mcc(mvm); |
| if (ret) |
| goto error; |
| } |
| |
| if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) { |
| mvm->scan_type = IWL_SCAN_TYPE_NOT_SET; |
| ret = iwl_mvm_config_scan(mvm); |
| if (ret) |
| goto error; |
| } |
| |
| if (iwl_mvm_is_csum_supported(mvm) && |
| mvm->cfg->features & NETIF_F_RXCSUM) |
| iwl_trans_write_prph(mvm->trans, RX_EN_CSUM, 0x3); |
| |
| /* allow FW/transport low power modes if not during restart */ |
| if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) |
| iwl_mvm_unref(mvm, IWL_MVM_REF_UCODE_DOWN); |
| |
| IWL_DEBUG_INFO(mvm, "RT uCode started.\n"); |
| return 0; |
| error: |
| iwl_trans_stop_device(mvm->trans); |
| return ret; |
| } |
| |
| int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm) |
| { |
| int ret, i; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| ret = iwl_trans_start_hw(mvm->trans); |
| if (ret) |
| return ret; |
| |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_WOWLAN); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start WoWLAN firmware: %d\n", ret); |
| goto error; |
| } |
| |
| ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); |
| if (ret) |
| goto error; |
| |
| /* Send phy db control command and then phy db calibration*/ |
| ret = iwl_send_phy_db_data(mvm->phy_db); |
| if (ret) |
| goto error; |
| |
| ret = iwl_send_phy_cfg_cmd(mvm); |
| if (ret) |
| goto error; |
| |
| /* init the fw <-> mac80211 STA mapping */ |
| for (i = 0; i < IWL_MVM_STATION_COUNT; i++) |
| RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); |
| |
| /* Add auxiliary station for scanning */ |
| ret = iwl_mvm_add_aux_sta(mvm); |
| if (ret) |
| goto error; |
| |
| return 0; |
| error: |
| iwl_trans_stop_device(mvm->trans); |
| return ret; |
| } |
| |
| void iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, |
| struct iwl_rx_cmd_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_card_state_notif *card_state_notif = (void *)pkt->data; |
| u32 flags = le32_to_cpu(card_state_notif->flags); |
| |
| IWL_DEBUG_RF_KILL(mvm, "Card state received: HW:%s SW:%s CT:%s\n", |
| (flags & HW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & SW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & CT_KILL_CARD_DISABLED) ? |
| "Reached" : "Not reached"); |
| } |
| |
| void iwl_mvm_rx_mfuart_notif(struct iwl_mvm *mvm, |
| struct iwl_rx_cmd_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_mfuart_load_notif *mfuart_notif = (void *)pkt->data; |
| |
| IWL_DEBUG_INFO(mvm, |
| "MFUART: installed ver: 0x%08x, external ver: 0x%08x, status: 0x%08x, duration: 0x%08x\n", |
| le32_to_cpu(mfuart_notif->installed_ver), |
| le32_to_cpu(mfuart_notif->external_ver), |
| le32_to_cpu(mfuart_notif->status), |
| le32_to_cpu(mfuart_notif->duration)); |
| } |