| /* |
| * GPIO controller in LSI ZEVIO SoCs. |
| * |
| * Author: Fabian Vogt <fabian@ritter-vogt.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/slab.h> |
| #include <linux/gpio.h> |
| |
| /* |
| * Memory layout: |
| * This chip has four gpio sections, each controls 8 GPIOs. |
| * Bit 0 in section 0 is GPIO 0, bit 2 in section 1 is GPIO 10. |
| * Disclaimer: Reverse engineered! |
| * For more information refer to: |
| * http://hackspire.unsads.com/wiki/index.php/Memory-mapped_I/O_ports#90000000_-_General_Purpose_I.2FO_.28GPIO.29 |
| * |
| * 0x00-0x3F: Section 0 |
| * +0x00: Masked interrupt status (read-only) |
| * +0x04: R: Interrupt status W: Reset interrupt status |
| * +0x08: R: Interrupt mask W: Mask interrupt |
| * +0x0C: W: Unmask interrupt (write-only) |
| * +0x10: Direction: I/O=1/0 |
| * +0x14: Output |
| * +0x18: Input (read-only) |
| * +0x20: R: Level interrupt W: Set as level interrupt |
| * 0x40-0x7F: Section 1 |
| * 0x80-0xBF: Section 2 |
| * 0xC0-0xFF: Section 3 |
| */ |
| |
| #define ZEVIO_GPIO_SECTION_SIZE 0x40 |
| |
| /* Offsets to various registers */ |
| #define ZEVIO_GPIO_INT_MASKED_STATUS 0x00 |
| #define ZEVIO_GPIO_INT_STATUS 0x04 |
| #define ZEVIO_GPIO_INT_UNMASK 0x08 |
| #define ZEVIO_GPIO_INT_MASK 0x0C |
| #define ZEVIO_GPIO_DIRECTION 0x10 |
| #define ZEVIO_GPIO_OUTPUT 0x14 |
| #define ZEVIO_GPIO_INPUT 0x18 |
| #define ZEVIO_GPIO_INT_STICKY 0x20 |
| |
| /* Bit number of GPIO in its section */ |
| #define ZEVIO_GPIO_BIT(gpio) (gpio&7) |
| |
| struct zevio_gpio { |
| spinlock_t lock; |
| struct of_mm_gpio_chip chip; |
| }; |
| |
| static inline u32 zevio_gpio_port_get(struct zevio_gpio *c, unsigned pin, |
| unsigned port_offset) |
| { |
| unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE; |
| return readl(IOMEM(c->chip.regs + section_offset + port_offset)); |
| } |
| |
| static inline void zevio_gpio_port_set(struct zevio_gpio *c, unsigned pin, |
| unsigned port_offset, u32 val) |
| { |
| unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE; |
| writel(val, IOMEM(c->chip.regs + section_offset + port_offset)); |
| } |
| |
| /* Functions for struct gpio_chip */ |
| static int zevio_gpio_get(struct gpio_chip *chip, unsigned pin) |
| { |
| struct zevio_gpio *controller = gpiochip_get_data(chip); |
| u32 val, dir; |
| |
| spin_lock(&controller->lock); |
| dir = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); |
| if (dir & BIT(ZEVIO_GPIO_BIT(pin))) |
| val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_INPUT); |
| else |
| val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); |
| spin_unlock(&controller->lock); |
| |
| return (val >> ZEVIO_GPIO_BIT(pin)) & 0x1; |
| } |
| |
| static void zevio_gpio_set(struct gpio_chip *chip, unsigned pin, int value) |
| { |
| struct zevio_gpio *controller = gpiochip_get_data(chip); |
| u32 val; |
| |
| spin_lock(&controller->lock); |
| val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); |
| if (value) |
| val |= BIT(ZEVIO_GPIO_BIT(pin)); |
| else |
| val &= ~BIT(ZEVIO_GPIO_BIT(pin)); |
| |
| zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val); |
| spin_unlock(&controller->lock); |
| } |
| |
| static int zevio_gpio_direction_input(struct gpio_chip *chip, unsigned pin) |
| { |
| struct zevio_gpio *controller = gpiochip_get_data(chip); |
| u32 val; |
| |
| spin_lock(&controller->lock); |
| |
| val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); |
| val |= BIT(ZEVIO_GPIO_BIT(pin)); |
| zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val); |
| |
| spin_unlock(&controller->lock); |
| |
| return 0; |
| } |
| |
| static int zevio_gpio_direction_output(struct gpio_chip *chip, |
| unsigned pin, int value) |
| { |
| struct zevio_gpio *controller = gpiochip_get_data(chip); |
| u32 val; |
| |
| spin_lock(&controller->lock); |
| val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); |
| if (value) |
| val |= BIT(ZEVIO_GPIO_BIT(pin)); |
| else |
| val &= ~BIT(ZEVIO_GPIO_BIT(pin)); |
| |
| zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val); |
| val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); |
| val &= ~BIT(ZEVIO_GPIO_BIT(pin)); |
| zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val); |
| |
| spin_unlock(&controller->lock); |
| |
| return 0; |
| } |
| |
| static int zevio_gpio_to_irq(struct gpio_chip *chip, unsigned pin) |
| { |
| /* |
| * TODO: Implement IRQs. |
| * Not implemented yet due to weird lockups |
| */ |
| |
| return -ENXIO; |
| } |
| |
| static const struct gpio_chip zevio_gpio_chip = { |
| .direction_input = zevio_gpio_direction_input, |
| .direction_output = zevio_gpio_direction_output, |
| .set = zevio_gpio_set, |
| .get = zevio_gpio_get, |
| .to_irq = zevio_gpio_to_irq, |
| .base = 0, |
| .owner = THIS_MODULE, |
| .ngpio = 32, |
| .of_gpio_n_cells = 2, |
| }; |
| |
| /* Initialization */ |
| static int zevio_gpio_probe(struct platform_device *pdev) |
| { |
| struct zevio_gpio *controller; |
| int status, i; |
| |
| controller = devm_kzalloc(&pdev->dev, sizeof(*controller), GFP_KERNEL); |
| if (!controller) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, controller); |
| |
| /* Copy our reference */ |
| controller->chip.gc = zevio_gpio_chip; |
| controller->chip.gc.parent = &pdev->dev; |
| |
| status = of_mm_gpiochip_add_data(pdev->dev.of_node, |
| &(controller->chip), |
| controller); |
| if (status) { |
| dev_err(&pdev->dev, "failed to add gpiochip: %d\n", status); |
| return status; |
| } |
| |
| spin_lock_init(&controller->lock); |
| |
| /* Disable interrupts, they only cause errors */ |
| for (i = 0; i < controller->chip.gc.ngpio; i += 8) |
| zevio_gpio_port_set(controller, i, ZEVIO_GPIO_INT_MASK, 0xFF); |
| |
| dev_dbg(controller->chip.gc.parent, "ZEVIO GPIO controller set up!\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id zevio_gpio_of_match[] = { |
| { .compatible = "lsi,zevio-gpio", }, |
| { }, |
| }; |
| |
| static struct platform_driver zevio_gpio_driver = { |
| .driver = { |
| .name = "gpio-zevio", |
| .of_match_table = zevio_gpio_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = zevio_gpio_probe, |
| }; |
| builtin_platform_driver(zevio_gpio_driver); |