| /* |
| * Copyright (C) 2013 TangoTec Ltd. |
| * Author: Baruch Siach <baruch@tkos.co.il> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Driver for the Xtensa LX4 GPIO32 Option |
| * |
| * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22 |
| * |
| * GPIO32 is a standard optional extension to the Xtensa architecture core that |
| * provides preconfigured output and input ports for intra SoC signaling. The |
| * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) |
| * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This |
| * driver treats input and output states as two distinct devices. |
| * |
| * Access to GPIO32 specific instructions is controlled by the CPENABLE |
| * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code |
| * disables access to all coprocessors. This driver sets the CPENABLE bit |
| * corresponding to GPIO32 before any GPIO32 specific instruction, and restores |
| * CPENABLE state after that. |
| * |
| * This driver is currently incompatible with SMP. The GPIO32 extension is not |
| * guaranteed to be available in all cores. Moreover, each core controls a |
| * different set of IO wires. A theoretical SMP aware version of this driver |
| * would need to have a per core workqueue to do the actual GPIO manipulation. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/gpio.h> |
| #include <linux/bitops.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/coprocessor.h> /* CPENABLE read/write macros */ |
| |
| #ifndef XCHAL_CP_ID_XTIOP |
| #error GPIO32 option is not enabled for your xtensa core variant |
| #endif |
| |
| #if XCHAL_HAVE_CP |
| |
| static inline unsigned long enable_cp(unsigned long *cpenable) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| RSR_CPENABLE(*cpenable); |
| WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP)); |
| |
| return flags; |
| } |
| |
| static inline void disable_cp(unsigned long flags, unsigned long cpenable) |
| { |
| WSR_CPENABLE(cpenable); |
| local_irq_restore(flags); |
| } |
| |
| #else |
| |
| static inline unsigned long enable_cp(unsigned long *cpenable) |
| { |
| *cpenable = 0; /* avoid uninitialized value warning */ |
| return 0; |
| } |
| |
| static inline void disable_cp(unsigned long flags, unsigned long cpenable) |
| { |
| } |
| |
| #endif /* XCHAL_HAVE_CP */ |
| |
| static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset) |
| { |
| return 1; /* input only */ |
| } |
| |
| static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset) |
| { |
| unsigned long flags, saved_cpenable; |
| u32 impwire; |
| |
| flags = enable_cp(&saved_cpenable); |
| __asm__ __volatile__("read_impwire %0" : "=a" (impwire)); |
| disable_cp(flags, saved_cpenable); |
| |
| return !!(impwire & BIT(offset)); |
| } |
| |
| static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset, |
| int value) |
| { |
| BUG(); /* output only; should never be called */ |
| } |
| |
| static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset) |
| { |
| return 0; /* output only */ |
| } |
| |
| static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset) |
| { |
| unsigned long flags, saved_cpenable; |
| u32 expstate; |
| |
| flags = enable_cp(&saved_cpenable); |
| __asm__ __volatile__("rur.expstate %0" : "=a" (expstate)); |
| disable_cp(flags, saved_cpenable); |
| |
| return !!(expstate & BIT(offset)); |
| } |
| |
| static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset, |
| int value) |
| { |
| unsigned long flags, saved_cpenable; |
| u32 mask = BIT(offset); |
| u32 val = value ? BIT(offset) : 0; |
| |
| flags = enable_cp(&saved_cpenable); |
| __asm__ __volatile__("wrmsk_expstate %0, %1" |
| :: "a" (val), "a" (mask)); |
| disable_cp(flags, saved_cpenable); |
| } |
| |
| static struct gpio_chip impwire_chip = { |
| .label = "impwire", |
| .base = -1, |
| .ngpio = 32, |
| .get_direction = xtensa_impwire_get_direction, |
| .get = xtensa_impwire_get_value, |
| .set = xtensa_impwire_set_value, |
| }; |
| |
| static struct gpio_chip expstate_chip = { |
| .label = "expstate", |
| .base = -1, |
| .ngpio = 32, |
| .get_direction = xtensa_expstate_get_direction, |
| .get = xtensa_expstate_get_value, |
| .set = xtensa_expstate_set_value, |
| }; |
| |
| static int xtensa_gpio_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| ret = gpiochip_add_data(&impwire_chip, NULL); |
| if (ret) |
| return ret; |
| return gpiochip_add_data(&expstate_chip, NULL); |
| } |
| |
| static struct platform_driver xtensa_gpio_driver = { |
| .driver = { |
| .name = "xtensa-gpio", |
| }, |
| .probe = xtensa_gpio_probe, |
| }; |
| |
| static int __init xtensa_gpio_init(void) |
| { |
| struct platform_device *pdev; |
| |
| pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0); |
| if (IS_ERR(pdev)) |
| return PTR_ERR(pdev); |
| |
| return platform_driver_register(&xtensa_gpio_driver); |
| } |
| device_initcall(xtensa_gpio_init); |
| |
| MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); |
| MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver"); |
| MODULE_LICENSE("GPL"); |