| /* |
| * MEN 16Z127 GPIO driver |
| * |
| * Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; version 2 of the License. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/mcb.h> |
| #include <linux/bitops.h> |
| #include <linux/gpio/driver.h> |
| |
| #define MEN_Z127_CTRL 0x00 |
| #define MEN_Z127_PSR 0x04 |
| #define MEN_Z127_IRQR 0x08 |
| #define MEN_Z127_GPIODR 0x0c |
| #define MEN_Z127_IER1 0x10 |
| #define MEN_Z127_IER2 0x14 |
| #define MEN_Z127_DBER 0x18 |
| #define MEN_Z127_ODER 0x1C |
| #define GPIO_TO_DBCNT_REG(gpio) ((gpio * 4) + 0x80) |
| |
| #define MEN_Z127_DB_MIN_US 50 |
| /* 16 bit compare register. Each bit represents 50us */ |
| #define MEN_Z127_DB_MAX_US (0xffff * MEN_Z127_DB_MIN_US) |
| #define MEN_Z127_DB_IN_RANGE(db) ((db >= MEN_Z127_DB_MIN_US) && \ |
| (db <= MEN_Z127_DB_MAX_US)) |
| |
| struct men_z127_gpio { |
| struct gpio_chip gc; |
| void __iomem *reg_base; |
| struct resource *mem; |
| }; |
| |
| static int men_z127_debounce(struct gpio_chip *gc, unsigned gpio, |
| unsigned debounce) |
| { |
| struct men_z127_gpio *priv = gpiochip_get_data(gc); |
| struct device *dev = gc->parent; |
| unsigned int rnd; |
| u32 db_en, db_cnt; |
| |
| if (!MEN_Z127_DB_IN_RANGE(debounce)) { |
| dev_err(dev, "debounce value %u out of range", debounce); |
| return -EINVAL; |
| } |
| |
| if (debounce > 0) { |
| /* round up or down depending on MSB-1 */ |
| rnd = fls(debounce) - 1; |
| |
| if (rnd && (debounce & BIT(rnd - 1))) |
| debounce = roundup(debounce, MEN_Z127_DB_MIN_US); |
| else |
| debounce = rounddown(debounce, MEN_Z127_DB_MIN_US); |
| |
| if (debounce > MEN_Z127_DB_MAX_US) |
| debounce = MEN_Z127_DB_MAX_US; |
| |
| /* 50us per register unit */ |
| debounce /= 50; |
| } |
| |
| spin_lock(&gc->bgpio_lock); |
| |
| db_en = readl(priv->reg_base + MEN_Z127_DBER); |
| |
| if (debounce == 0) { |
| db_en &= ~BIT(gpio); |
| db_cnt = 0; |
| } else { |
| db_en |= BIT(gpio); |
| db_cnt = debounce; |
| } |
| |
| writel(db_en, priv->reg_base + MEN_Z127_DBER); |
| writel(db_cnt, priv->reg_base + GPIO_TO_DBCNT_REG(gpio)); |
| |
| spin_unlock(&gc->bgpio_lock); |
| |
| return 0; |
| } |
| |
| static int men_z127_set_single_ended(struct gpio_chip *gc, |
| unsigned offset, |
| enum pin_config_param param) |
| { |
| struct men_z127_gpio *priv = gpiochip_get_data(gc); |
| u32 od_en; |
| |
| spin_lock(&gc->bgpio_lock); |
| od_en = readl(priv->reg_base + MEN_Z127_ODER); |
| |
| if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) |
| od_en |= BIT(offset); |
| else |
| /* Implicitly PIN_CONFIG_DRIVE_PUSH_PULL */ |
| od_en &= ~BIT(offset); |
| |
| writel(od_en, priv->reg_base + MEN_Z127_ODER); |
| spin_unlock(&gc->bgpio_lock); |
| |
| return 0; |
| } |
| |
| static int men_z127_set_config(struct gpio_chip *gc, unsigned offset, |
| unsigned long config) |
| { |
| enum pin_config_param param = pinconf_to_config_param(config); |
| |
| switch (param) { |
| case PIN_CONFIG_DRIVE_OPEN_DRAIN: |
| case PIN_CONFIG_DRIVE_PUSH_PULL: |
| return men_z127_set_single_ended(gc, offset, param); |
| |
| case PIN_CONFIG_INPUT_DEBOUNCE: |
| return men_z127_debounce(gc, offset, |
| pinconf_to_config_argument(config)); |
| |
| default: |
| break; |
| } |
| |
| return -ENOTSUPP; |
| } |
| |
| static int men_z127_probe(struct mcb_device *mdev, |
| const struct mcb_device_id *id) |
| { |
| struct men_z127_gpio *men_z127_gpio; |
| struct device *dev = &mdev->dev; |
| int ret; |
| |
| men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio), |
| GFP_KERNEL); |
| if (!men_z127_gpio) |
| return -ENOMEM; |
| |
| men_z127_gpio->mem = mcb_request_mem(mdev, dev_name(dev)); |
| if (IS_ERR(men_z127_gpio->mem)) { |
| dev_err(dev, "failed to request device memory"); |
| return PTR_ERR(men_z127_gpio->mem); |
| } |
| |
| men_z127_gpio->reg_base = ioremap(men_z127_gpio->mem->start, |
| resource_size(men_z127_gpio->mem)); |
| if (men_z127_gpio->reg_base == NULL) { |
| ret = -ENXIO; |
| goto err_release; |
| } |
| |
| mcb_set_drvdata(mdev, men_z127_gpio); |
| |
| ret = bgpio_init(&men_z127_gpio->gc, &mdev->dev, 4, |
| men_z127_gpio->reg_base + MEN_Z127_PSR, |
| men_z127_gpio->reg_base + MEN_Z127_CTRL, |
| NULL, |
| men_z127_gpio->reg_base + MEN_Z127_GPIODR, |
| NULL, 0); |
| if (ret) |
| goto err_unmap; |
| |
| men_z127_gpio->gc.set_config = men_z127_set_config; |
| |
| ret = gpiochip_add_data(&men_z127_gpio->gc, men_z127_gpio); |
| if (ret) { |
| dev_err(dev, "failed to register MEN 16Z127 GPIO controller"); |
| goto err_unmap; |
| } |
| |
| dev_info(dev, "MEN 16Z127 GPIO driver registered"); |
| |
| return 0; |
| |
| err_unmap: |
| iounmap(men_z127_gpio->reg_base); |
| err_release: |
| mcb_release_mem(men_z127_gpio->mem); |
| return ret; |
| } |
| |
| static void men_z127_remove(struct mcb_device *mdev) |
| { |
| struct men_z127_gpio *men_z127_gpio = mcb_get_drvdata(mdev); |
| |
| gpiochip_remove(&men_z127_gpio->gc); |
| iounmap(men_z127_gpio->reg_base); |
| mcb_release_mem(men_z127_gpio->mem); |
| } |
| |
| static const struct mcb_device_id men_z127_ids[] = { |
| { .device = 0x7f }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(mcb, men_z127_ids); |
| |
| static struct mcb_driver men_z127_driver = { |
| .driver = { |
| .name = "z127-gpio", |
| }, |
| .probe = men_z127_probe, |
| .remove = men_z127_remove, |
| .id_table = men_z127_ids, |
| }; |
| module_mcb_driver(men_z127_driver); |
| |
| MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); |
| MODULE_DESCRIPTION("MEN 16z127 GPIO Controller"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("mcb:16z127"); |