| // SPDX-License-Identifier: GPL-2.0+ |
| // Copyright (C) 2008-2009 The GameCube Linux Team |
| // Copyright (C) 2008,2009 Albert Herranz |
| // Copyright (C) 2017-2018 Jonathan Neuschäfer |
| // |
| // Nintendo Wii (Hollywood) GPIO driver |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/slab.h> |
| |
| /* |
| * Register names and offsets courtesy of WiiBrew: |
| * https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs |
| * |
| * Note that for most registers, there are two versions: |
| * - HW_GPIOB_* Is always accessible by the Broadway PowerPC core, but does |
| * always give access to all GPIO lines |
| * - HW_GPIO_* Is only accessible by the Broadway PowerPC code if the memory |
| * firewall (AHBPROT) in the Hollywood chipset has been configured to allow |
| * such access. |
| * |
| * The ownership of each GPIO line can be configured in the HW_GPIO_OWNER |
| * register: A one bit configures the line for access via the HW_GPIOB_* |
| * registers, a zero bit indicates access via HW_GPIO_*. This driver uses |
| * HW_GPIOB_*. |
| */ |
| #define HW_GPIOB_OUT 0x00 |
| #define HW_GPIOB_DIR 0x04 |
| #define HW_GPIOB_IN 0x08 |
| #define HW_GPIOB_INTLVL 0x0c |
| #define HW_GPIOB_INTFLAG 0x10 |
| #define HW_GPIOB_INTMASK 0x14 |
| #define HW_GPIOB_INMIR 0x18 |
| #define HW_GPIO_ENABLE 0x1c |
| #define HW_GPIO_OUT 0x20 |
| #define HW_GPIO_DIR 0x24 |
| #define HW_GPIO_IN 0x28 |
| #define HW_GPIO_INTLVL 0x2c |
| #define HW_GPIO_INTFLAG 0x30 |
| #define HW_GPIO_INTMASK 0x34 |
| #define HW_GPIO_INMIR 0x38 |
| #define HW_GPIO_OWNER 0x3c |
| |
| struct hlwd_gpio { |
| struct gpio_chip gpioc; |
| void __iomem *regs; |
| }; |
| |
| static int hlwd_gpio_probe(struct platform_device *pdev) |
| { |
| struct hlwd_gpio *hlwd; |
| struct resource *regs_resource; |
| u32 ngpios; |
| int res; |
| |
| hlwd = devm_kzalloc(&pdev->dev, sizeof(*hlwd), GFP_KERNEL); |
| if (!hlwd) |
| return -ENOMEM; |
| |
| regs_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| hlwd->regs = devm_ioremap_resource(&pdev->dev, regs_resource); |
| if (IS_ERR(hlwd->regs)) |
| return PTR_ERR(hlwd->regs); |
| |
| /* |
| * Claim all GPIOs using the OWNER register. This will not work on |
| * systems where the AHBPROT memory firewall hasn't been configured to |
| * permit PPC access to HW_GPIO_*. |
| * |
| * Note that this has to happen before bgpio_init reads the |
| * HW_GPIOB_OUT and HW_GPIOB_DIR, because otherwise it reads the wrong |
| * values. |
| */ |
| iowrite32be(0xffffffff, hlwd->regs + HW_GPIO_OWNER); |
| |
| res = bgpio_init(&hlwd->gpioc, &pdev->dev, 4, |
| hlwd->regs + HW_GPIOB_IN, hlwd->regs + HW_GPIOB_OUT, |
| NULL, hlwd->regs + HW_GPIOB_DIR, NULL, |
| BGPIOF_BIG_ENDIAN_BYTE_ORDER); |
| if (res < 0) { |
| dev_warn(&pdev->dev, "bgpio_init failed: %d\n", res); |
| return res; |
| } |
| |
| res = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios); |
| if (res) |
| ngpios = 32; |
| hlwd->gpioc.ngpio = ngpios; |
| |
| return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd); |
| } |
| |
| static const struct of_device_id hlwd_gpio_match[] = { |
| { .compatible = "nintendo,hollywood-gpio", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, hlwd_gpio_match); |
| |
| static struct platform_driver hlwd_gpio_driver = { |
| .driver = { |
| .name = "gpio-hlwd", |
| .of_match_table = hlwd_gpio_match, |
| }, |
| .probe = hlwd_gpio_probe, |
| }; |
| module_platform_driver(hlwd_gpio_driver); |
| |
| MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); |
| MODULE_DESCRIPTION("Nintendo Wii GPIO driver"); |
| MODULE_LICENSE("GPL"); |