| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc. |
| * |
| * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net) |
| * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz) |
| */ |
| |
| #include <asm/head.h> |
| |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/sched/debug.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/signal.h> |
| #include <linux/mm.h> |
| #include <linux/extable.h> |
| #include <linux/init.h> |
| #include <linux/perf_event.h> |
| #include <linux/interrupt.h> |
| #include <linux/kprobes.h> |
| #include <linux/kdebug.h> |
| #include <linux/percpu.h> |
| #include <linux/context_tracking.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/openprom.h> |
| #include <asm/oplib.h> |
| #include <asm/asi.h> |
| #include <asm/lsu.h> |
| #include <asm/sections.h> |
| #include <asm/mmu_context.h> |
| #include <asm/setup.h> |
| |
| int show_unhandled_signals = 1; |
| |
| static inline __kprobes int notify_page_fault(struct pt_regs *regs) |
| { |
| int ret = 0; |
| |
| /* kprobe_running() needs smp_processor_id() */ |
| if (kprobes_built_in() && !user_mode(regs)) { |
| preempt_disable(); |
| if (kprobe_running() && kprobe_fault_handler(regs, 0)) |
| ret = 1; |
| preempt_enable(); |
| } |
| return ret; |
| } |
| |
| static void __kprobes unhandled_fault(unsigned long address, |
| struct task_struct *tsk, |
| struct pt_regs *regs) |
| { |
| if ((unsigned long) address < PAGE_SIZE) { |
| printk(KERN_ALERT "Unable to handle kernel NULL " |
| "pointer dereference\n"); |
| } else { |
| printk(KERN_ALERT "Unable to handle kernel paging request " |
| "at virtual address %016lx\n", (unsigned long)address); |
| } |
| printk(KERN_ALERT "tsk->{mm,active_mm}->context = %016lx\n", |
| (tsk->mm ? |
| CTX_HWBITS(tsk->mm->context) : |
| CTX_HWBITS(tsk->active_mm->context))); |
| printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %016lx\n", |
| (tsk->mm ? (unsigned long) tsk->mm->pgd : |
| (unsigned long) tsk->active_mm->pgd)); |
| die_if_kernel("Oops", regs); |
| } |
| |
| static void __kprobes bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr) |
| { |
| printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n", |
| regs->tpc); |
| printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]); |
| printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]); |
| printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr); |
| dump_stack(); |
| unhandled_fault(regs->tpc, current, regs); |
| } |
| |
| /* |
| * We now make sure that mmap_sem is held in all paths that call |
| * this. Additionally, to prevent kswapd from ripping ptes from |
| * under us, raise interrupts around the time that we look at the |
| * pte, kswapd will have to wait to get his smp ipi response from |
| * us. vmtruncate likewise. This saves us having to get pte lock. |
| */ |
| static unsigned int get_user_insn(unsigned long tpc) |
| { |
| pgd_t *pgdp = pgd_offset(current->mm, tpc); |
| pud_t *pudp; |
| pmd_t *pmdp; |
| pte_t *ptep, pte; |
| unsigned long pa; |
| u32 insn = 0; |
| |
| if (pgd_none(*pgdp) || unlikely(pgd_bad(*pgdp))) |
| goto out; |
| pudp = pud_offset(pgdp, tpc); |
| if (pud_none(*pudp) || unlikely(pud_bad(*pudp))) |
| goto out; |
| |
| /* This disables preemption for us as well. */ |
| local_irq_disable(); |
| |
| pmdp = pmd_offset(pudp, tpc); |
| if (pmd_none(*pmdp) || unlikely(pmd_bad(*pmdp))) |
| goto out_irq_enable; |
| |
| #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE) |
| if (is_hugetlb_pmd(*pmdp)) { |
| pa = pmd_pfn(*pmdp) << PAGE_SHIFT; |
| pa += tpc & ~HPAGE_MASK; |
| |
| /* Use phys bypass so we don't pollute dtlb/dcache. */ |
| __asm__ __volatile__("lduwa [%1] %2, %0" |
| : "=r" (insn) |
| : "r" (pa), "i" (ASI_PHYS_USE_EC)); |
| } else |
| #endif |
| { |
| ptep = pte_offset_map(pmdp, tpc); |
| pte = *ptep; |
| if (pte_present(pte)) { |
| pa = (pte_pfn(pte) << PAGE_SHIFT); |
| pa += (tpc & ~PAGE_MASK); |
| |
| /* Use phys bypass so we don't pollute dtlb/dcache. */ |
| __asm__ __volatile__("lduwa [%1] %2, %0" |
| : "=r" (insn) |
| : "r" (pa), "i" (ASI_PHYS_USE_EC)); |
| } |
| pte_unmap(ptep); |
| } |
| out_irq_enable: |
| local_irq_enable(); |
| out: |
| return insn; |
| } |
| |
| static inline void |
| show_signal_msg(struct pt_regs *regs, int sig, int code, |
| unsigned long address, struct task_struct *tsk) |
| { |
| if (!unhandled_signal(tsk, sig)) |
| return; |
| |
| if (!printk_ratelimit()) |
| return; |
| |
| printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x", |
| task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, |
| tsk->comm, task_pid_nr(tsk), address, |
| (void *)regs->tpc, (void *)regs->u_regs[UREG_I7], |
| (void *)regs->u_regs[UREG_FP], code); |
| |
| print_vma_addr(KERN_CONT " in ", regs->tpc); |
| |
| printk(KERN_CONT "\n"); |
| } |
| |
| static void do_fault_siginfo(int code, int sig, struct pt_regs *regs, |
| unsigned long fault_addr, unsigned int insn, |
| int fault_code) |
| { |
| unsigned long addr; |
| |
| if (fault_code & FAULT_CODE_ITLB) { |
| addr = regs->tpc; |
| } else { |
| /* If we were able to probe the faulting instruction, use it |
| * to compute a precise fault address. Otherwise use the fault |
| * time provided address which may only have page granularity. |
| */ |
| if (insn) |
| addr = compute_effective_address(regs, insn, 0); |
| else |
| addr = fault_addr; |
| } |
| |
| if (unlikely(show_unhandled_signals)) |
| show_signal_msg(regs, sig, code, addr, current); |
| |
| force_sig_fault(sig, code, (void __user *) addr, 0, current); |
| } |
| |
| static unsigned int get_fault_insn(struct pt_regs *regs, unsigned int insn) |
| { |
| if (!insn) { |
| if (!regs->tpc || (regs->tpc & 0x3)) |
| return 0; |
| if (regs->tstate & TSTATE_PRIV) { |
| insn = *(unsigned int *) regs->tpc; |
| } else { |
| insn = get_user_insn(regs->tpc); |
| } |
| } |
| return insn; |
| } |
| |
| static void __kprobes do_kernel_fault(struct pt_regs *regs, int si_code, |
| int fault_code, unsigned int insn, |
| unsigned long address) |
| { |
| unsigned char asi = ASI_P; |
| |
| if ((!insn) && (regs->tstate & TSTATE_PRIV)) |
| goto cannot_handle; |
| |
| /* If user insn could be read (thus insn is zero), that |
| * is fine. We will just gun down the process with a signal |
| * in that case. |
| */ |
| |
| if (!(fault_code & (FAULT_CODE_WRITE|FAULT_CODE_ITLB)) && |
| (insn & 0xc0800000) == 0xc0800000) { |
| if (insn & 0x2000) |
| asi = (regs->tstate >> 24); |
| else |
| asi = (insn >> 5); |
| if ((asi & 0xf2) == 0x82) { |
| if (insn & 0x1000000) { |
| handle_ldf_stq(insn, regs); |
| } else { |
| /* This was a non-faulting load. Just clear the |
| * destination register(s) and continue with the next |
| * instruction. -jj |
| */ |
| handle_ld_nf(insn, regs); |
| } |
| return; |
| } |
| } |
| |
| /* Is this in ex_table? */ |
| if (regs->tstate & TSTATE_PRIV) { |
| const struct exception_table_entry *entry; |
| |
| entry = search_exception_tables(regs->tpc); |
| if (entry) { |
| regs->tpc = entry->fixup; |
| regs->tnpc = regs->tpc + 4; |
| return; |
| } |
| } else { |
| /* The si_code was set to make clear whether |
| * this was a SEGV_MAPERR or SEGV_ACCERR fault. |
| */ |
| do_fault_siginfo(si_code, SIGSEGV, regs, address, insn, fault_code); |
| return; |
| } |
| |
| cannot_handle: |
| unhandled_fault (address, current, regs); |
| } |
| |
| static void noinline __kprobes bogus_32bit_fault_tpc(struct pt_regs *regs) |
| { |
| static int times; |
| |
| if (times++ < 10) |
| printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports " |
| "64-bit TPC [%lx]\n", |
| current->comm, current->pid, |
| regs->tpc); |
| show_regs(regs); |
| } |
| |
| asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) |
| { |
| enum ctx_state prev_state = exception_enter(); |
| struct mm_struct *mm = current->mm; |
| struct vm_area_struct *vma; |
| unsigned int insn = 0; |
| int si_code, fault_code; |
| vm_fault_t fault; |
| unsigned long address, mm_rss; |
| unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; |
| |
| fault_code = get_thread_fault_code(); |
| |
| if (notify_page_fault(regs)) |
| goto exit_exception; |
| |
| si_code = SEGV_MAPERR; |
| address = current_thread_info()->fault_address; |
| |
| if ((fault_code & FAULT_CODE_ITLB) && |
| (fault_code & FAULT_CODE_DTLB)) |
| BUG(); |
| |
| if (test_thread_flag(TIF_32BIT)) { |
| if (!(regs->tstate & TSTATE_PRIV)) { |
| if (unlikely((regs->tpc >> 32) != 0)) { |
| bogus_32bit_fault_tpc(regs); |
| goto intr_or_no_mm; |
| } |
| } |
| if (unlikely((address >> 32) != 0)) |
| goto intr_or_no_mm; |
| } |
| |
| if (regs->tstate & TSTATE_PRIV) { |
| unsigned long tpc = regs->tpc; |
| |
| /* Sanity check the PC. */ |
| if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) || |
| (tpc >= MODULES_VADDR && tpc < MODULES_END)) { |
| /* Valid, no problems... */ |
| } else { |
| bad_kernel_pc(regs, address); |
| goto exit_exception; |
| } |
| } else |
| flags |= FAULT_FLAG_USER; |
| |
| /* |
| * If we're in an interrupt or have no user |
| * context, we must not take the fault.. |
| */ |
| if (faulthandler_disabled() || !mm) |
| goto intr_or_no_mm; |
| |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); |
| |
| if (!down_read_trylock(&mm->mmap_sem)) { |
| if ((regs->tstate & TSTATE_PRIV) && |
| !search_exception_tables(regs->tpc)) { |
| insn = get_fault_insn(regs, insn); |
| goto handle_kernel_fault; |
| } |
| |
| retry: |
| down_read(&mm->mmap_sem); |
| } |
| |
| if (fault_code & FAULT_CODE_BAD_RA) |
| goto do_sigbus; |
| |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| |
| /* Pure DTLB misses do not tell us whether the fault causing |
| * load/store/atomic was a write or not, it only says that there |
| * was no match. So in such a case we (carefully) read the |
| * instruction to try and figure this out. It's an optimization |
| * so it's ok if we can't do this. |
| * |
| * Special hack, window spill/fill knows the exact fault type. |
| */ |
| if (((fault_code & |
| (FAULT_CODE_DTLB | FAULT_CODE_WRITE | FAULT_CODE_WINFIXUP)) == FAULT_CODE_DTLB) && |
| (vma->vm_flags & VM_WRITE) != 0) { |
| insn = get_fault_insn(regs, 0); |
| if (!insn) |
| goto continue_fault; |
| /* All loads, stores and atomics have bits 30 and 31 both set |
| * in the instruction. Bit 21 is set in all stores, but we |
| * have to avoid prefetches which also have bit 21 set. |
| */ |
| if ((insn & 0xc0200000) == 0xc0200000 && |
| (insn & 0x01780000) != 0x01680000) { |
| /* Don't bother updating thread struct value, |
| * because update_mmu_cache only cares which tlb |
| * the access came from. |
| */ |
| fault_code |= FAULT_CODE_WRITE; |
| } |
| } |
| continue_fault: |
| |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (!(fault_code & FAULT_CODE_WRITE)) { |
| /* Non-faulting loads shouldn't expand stack. */ |
| insn = get_fault_insn(regs, insn); |
| if ((insn & 0xc0800000) == 0xc0800000) { |
| unsigned char asi; |
| |
| if (insn & 0x2000) |
| asi = (regs->tstate >> 24); |
| else |
| asi = (insn >> 5); |
| if ((asi & 0xf2) == 0x82) |
| goto bad_area; |
| } |
| } |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| /* |
| * Ok, we have a good vm_area for this memory access, so |
| * we can handle it.. |
| */ |
| good_area: |
| si_code = SEGV_ACCERR; |
| |
| /* If we took a ITLB miss on a non-executable page, catch |
| * that here. |
| */ |
| if ((fault_code & FAULT_CODE_ITLB) && !(vma->vm_flags & VM_EXEC)) { |
| WARN(address != regs->tpc, |
| "address (%lx) != regs->tpc (%lx)\n", address, regs->tpc); |
| WARN_ON(regs->tstate & TSTATE_PRIV); |
| goto bad_area; |
| } |
| |
| if (fault_code & FAULT_CODE_WRITE) { |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| |
| /* Spitfire has an icache which does not snoop |
| * processor stores. Later processors do... |
| */ |
| if (tlb_type == spitfire && |
| (vma->vm_flags & VM_EXEC) != 0 && |
| vma->vm_file != NULL) |
| set_thread_fault_code(fault_code | |
| FAULT_CODE_BLKCOMMIT); |
| |
| flags |= FAULT_FLAG_WRITE; |
| } else { |
| /* Allow reads even for write-only mappings */ |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC))) |
| goto bad_area; |
| } |
| |
| fault = handle_mm_fault(vma, address, flags); |
| |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) |
| goto exit_exception; |
| |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGSEGV) |
| goto bad_area; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { |
| if (fault & VM_FAULT_MAJOR) { |
| current->maj_flt++; |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, |
| 1, regs, address); |
| } else { |
| current->min_flt++; |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, |
| 1, regs, address); |
| } |
| if (fault & VM_FAULT_RETRY) { |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; |
| flags |= FAULT_FLAG_TRIED; |
| |
| /* No need to up_read(&mm->mmap_sem) as we would |
| * have already released it in __lock_page_or_retry |
| * in mm/filemap.c. |
| */ |
| |
| goto retry; |
| } |
| } |
| up_read(&mm->mmap_sem); |
| |
| mm_rss = get_mm_rss(mm); |
| #if defined(CONFIG_TRANSPARENT_HUGEPAGE) |
| mm_rss -= (mm->context.thp_pte_count * (HPAGE_SIZE / PAGE_SIZE)); |
| #endif |
| if (unlikely(mm_rss > |
| mm->context.tsb_block[MM_TSB_BASE].tsb_rss_limit)) |
| tsb_grow(mm, MM_TSB_BASE, mm_rss); |
| #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE) |
| mm_rss = mm->context.hugetlb_pte_count + mm->context.thp_pte_count; |
| mm_rss *= REAL_HPAGE_PER_HPAGE; |
| if (unlikely(mm_rss > |
| mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) { |
| if (mm->context.tsb_block[MM_TSB_HUGE].tsb) |
| tsb_grow(mm, MM_TSB_HUGE, mm_rss); |
| else |
| hugetlb_setup(regs); |
| |
| } |
| #endif |
| exit_exception: |
| exception_exit(prev_state); |
| return; |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * Fix it, but check if it's kernel or user first.. |
| */ |
| bad_area: |
| insn = get_fault_insn(regs, insn); |
| up_read(&mm->mmap_sem); |
| |
| handle_kernel_fault: |
| do_kernel_fault(regs, si_code, fault_code, insn, address); |
| goto exit_exception; |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| insn = get_fault_insn(regs, insn); |
| up_read(&mm->mmap_sem); |
| if (!(regs->tstate & TSTATE_PRIV)) { |
| pagefault_out_of_memory(); |
| goto exit_exception; |
| } |
| goto handle_kernel_fault; |
| |
| intr_or_no_mm: |
| insn = get_fault_insn(regs, 0); |
| goto handle_kernel_fault; |
| |
| do_sigbus: |
| insn = get_fault_insn(regs, insn); |
| up_read(&mm->mmap_sem); |
| |
| /* |
| * Send a sigbus, regardless of whether we were in kernel |
| * or user mode. |
| */ |
| do_fault_siginfo(BUS_ADRERR, SIGBUS, regs, address, insn, fault_code); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (regs->tstate & TSTATE_PRIV) |
| goto handle_kernel_fault; |
| } |