| /************************************************************************** |
| * Copyright (c) 2007-2011, Intel Corporation. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| **************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/pfn_t.h> |
| #include <linux/mm.h> |
| #include <linux/tty.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/console.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| |
| #include "psb_drv.h" |
| #include "psb_intel_reg.h" |
| #include "psb_intel_drv.h" |
| #include "framebuffer.h" |
| #include "gtt.h" |
| |
| static const struct drm_framebuffer_funcs psb_fb_funcs = { |
| .destroy = drm_gem_fb_destroy, |
| .create_handle = drm_gem_fb_create_handle, |
| }; |
| |
| #define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16) |
| |
| static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| struct psb_fbdev *fbdev = info->par; |
| struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb; |
| uint32_t v; |
| |
| if (!fb) |
| return -ENOMEM; |
| |
| if (regno > 255) |
| return 1; |
| |
| red = CMAP_TOHW(red, info->var.red.length); |
| blue = CMAP_TOHW(blue, info->var.blue.length); |
| green = CMAP_TOHW(green, info->var.green.length); |
| transp = CMAP_TOHW(transp, info->var.transp.length); |
| |
| v = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset) | |
| (transp << info->var.transp.offset); |
| |
| if (regno < 16) { |
| switch (fb->format->cpp[0] * 8) { |
| case 16: |
| ((uint32_t *) info->pseudo_palette)[regno] = v; |
| break; |
| case 24: |
| case 32: |
| ((uint32_t *) info->pseudo_palette)[regno] = v; |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int psbfb_pan(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct psb_fbdev *fbdev = info->par; |
| struct psb_framebuffer *psbfb = &fbdev->pfb; |
| struct drm_device *dev = psbfb->base.dev; |
| struct gtt_range *gtt = to_gtt_range(psbfb->base.obj[0]); |
| |
| /* |
| * We have to poke our nose in here. The core fb code assumes |
| * panning is part of the hardware that can be invoked before |
| * the actual fb is mapped. In our case that isn't quite true. |
| */ |
| if (gtt->npage) { |
| /* GTT roll shifts in 4K pages, we need to shift the right |
| number of pages */ |
| int pages = info->fix.line_length >> 12; |
| psb_gtt_roll(dev, gtt, var->yoffset * pages); |
| } |
| return 0; |
| } |
| |
| static vm_fault_t psbfb_vm_fault(struct vm_fault *vmf) |
| { |
| struct vm_area_struct *vma = vmf->vma; |
| struct psb_framebuffer *psbfb = vma->vm_private_data; |
| struct drm_device *dev = psbfb->base.dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gtt_range *gtt = to_gtt_range(psbfb->base.obj[0]); |
| int page_num; |
| int i; |
| unsigned long address; |
| vm_fault_t ret = VM_FAULT_SIGBUS; |
| unsigned long pfn; |
| unsigned long phys_addr = (unsigned long)dev_priv->stolen_base + |
| gtt->offset; |
| |
| page_num = vma_pages(vma); |
| address = vmf->address - (vmf->pgoff << PAGE_SHIFT); |
| |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| |
| for (i = 0; i < page_num; i++) { |
| pfn = (phys_addr >> PAGE_SHIFT); |
| |
| ret = vmf_insert_mixed(vma, address, |
| __pfn_to_pfn_t(pfn, PFN_DEV)); |
| if (unlikely(ret & VM_FAULT_ERROR)) |
| break; |
| address += PAGE_SIZE; |
| phys_addr += PAGE_SIZE; |
| } |
| return ret; |
| } |
| |
| static void psbfb_vm_open(struct vm_area_struct *vma) |
| { |
| } |
| |
| static void psbfb_vm_close(struct vm_area_struct *vma) |
| { |
| } |
| |
| static const struct vm_operations_struct psbfb_vm_ops = { |
| .fault = psbfb_vm_fault, |
| .open = psbfb_vm_open, |
| .close = psbfb_vm_close |
| }; |
| |
| static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma) |
| { |
| struct psb_fbdev *fbdev = info->par; |
| struct psb_framebuffer *psbfb = &fbdev->pfb; |
| |
| if (vma->vm_pgoff != 0) |
| return -EINVAL; |
| if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) |
| return -EINVAL; |
| |
| if (!psbfb->addr_space) |
| psbfb->addr_space = vma->vm_file->f_mapping; |
| /* |
| * If this is a GEM object then info->screen_base is the virtual |
| * kernel remapping of the object. FIXME: Review if this is |
| * suitable for our mmap work |
| */ |
| vma->vm_ops = &psbfb_vm_ops; |
| vma->vm_private_data = (void *)psbfb; |
| vma->vm_flags |= VM_IO | VM_MIXEDMAP | VM_DONTEXPAND | VM_DONTDUMP; |
| return 0; |
| } |
| |
| static struct fb_ops psbfb_ops = { |
| .owner = THIS_MODULE, |
| DRM_FB_HELPER_DEFAULT_OPS, |
| .fb_setcolreg = psbfb_setcolreg, |
| .fb_fillrect = drm_fb_helper_cfb_fillrect, |
| .fb_copyarea = psbfb_copyarea, |
| .fb_imageblit = drm_fb_helper_cfb_imageblit, |
| .fb_mmap = psbfb_mmap, |
| .fb_sync = psbfb_sync, |
| }; |
| |
| static struct fb_ops psbfb_roll_ops = { |
| .owner = THIS_MODULE, |
| DRM_FB_HELPER_DEFAULT_OPS, |
| .fb_setcolreg = psbfb_setcolreg, |
| .fb_fillrect = drm_fb_helper_cfb_fillrect, |
| .fb_copyarea = drm_fb_helper_cfb_copyarea, |
| .fb_imageblit = drm_fb_helper_cfb_imageblit, |
| .fb_pan_display = psbfb_pan, |
| .fb_mmap = psbfb_mmap, |
| }; |
| |
| static struct fb_ops psbfb_unaccel_ops = { |
| .owner = THIS_MODULE, |
| DRM_FB_HELPER_DEFAULT_OPS, |
| .fb_setcolreg = psbfb_setcolreg, |
| .fb_fillrect = drm_fb_helper_cfb_fillrect, |
| .fb_copyarea = drm_fb_helper_cfb_copyarea, |
| .fb_imageblit = drm_fb_helper_cfb_imageblit, |
| .fb_mmap = psbfb_mmap, |
| }; |
| |
| /** |
| * psb_framebuffer_init - initialize a framebuffer |
| * @dev: our DRM device |
| * @fb: framebuffer to set up |
| * @mode_cmd: mode description |
| * @gt: backing object |
| * |
| * Configure and fill in the boilerplate for our frame buffer. Return |
| * 0 on success or an error code if we fail. |
| */ |
| static int psb_framebuffer_init(struct drm_device *dev, |
| struct psb_framebuffer *fb, |
| const struct drm_mode_fb_cmd2 *mode_cmd, |
| struct gtt_range *gt) |
| { |
| const struct drm_format_info *info; |
| int ret; |
| |
| /* |
| * Reject unknown formats, YUV formats, and formats with more than |
| * 4 bytes per pixel. |
| */ |
| info = drm_format_info(mode_cmd->pixel_format); |
| if (!info || !info->depth || info->cpp[0] > 4) |
| return -EINVAL; |
| |
| if (mode_cmd->pitches[0] & 63) |
| return -EINVAL; |
| |
| drm_helper_mode_fill_fb_struct(dev, &fb->base, mode_cmd); |
| fb->base.obj[0] = >->gem; |
| ret = drm_framebuffer_init(dev, &fb->base, &psb_fb_funcs); |
| if (ret) { |
| dev_err(dev->dev, "framebuffer init failed: %d\n", ret); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /** |
| * psb_framebuffer_create - create a framebuffer backed by gt |
| * @dev: our DRM device |
| * @mode_cmd: the description of the requested mode |
| * @gt: the backing object |
| * |
| * Create a framebuffer object backed by the gt, and fill in the |
| * boilerplate required |
| * |
| * TODO: review object references |
| */ |
| |
| static struct drm_framebuffer *psb_framebuffer_create |
| (struct drm_device *dev, |
| const struct drm_mode_fb_cmd2 *mode_cmd, |
| struct gtt_range *gt) |
| { |
| struct psb_framebuffer *fb; |
| int ret; |
| |
| fb = kzalloc(sizeof(*fb), GFP_KERNEL); |
| if (!fb) |
| return ERR_PTR(-ENOMEM); |
| |
| ret = psb_framebuffer_init(dev, fb, mode_cmd, gt); |
| if (ret) { |
| kfree(fb); |
| return ERR_PTR(ret); |
| } |
| return &fb->base; |
| } |
| |
| /** |
| * psbfb_alloc - allocate frame buffer memory |
| * @dev: the DRM device |
| * @aligned_size: space needed |
| * |
| * Allocate the frame buffer. In the usual case we get a GTT range that |
| * is stolen memory backed and life is simple. If there isn't sufficient |
| * we fail as we don't have the virtual mapping space to really vmap it |
| * and the kernel console code can't handle non linear framebuffers. |
| * |
| * Re-address this as and if the framebuffer layer grows this ability. |
| */ |
| static struct gtt_range *psbfb_alloc(struct drm_device *dev, int aligned_size) |
| { |
| struct gtt_range *backing; |
| /* Begin by trying to use stolen memory backing */ |
| backing = psb_gtt_alloc_range(dev, aligned_size, "fb", 1, PAGE_SIZE); |
| if (backing) { |
| drm_gem_private_object_init(dev, &backing->gem, aligned_size); |
| return backing; |
| } |
| return NULL; |
| } |
| |
| /** |
| * psbfb_create - create a framebuffer |
| * @fbdev: the framebuffer device |
| * @sizes: specification of the layout |
| * |
| * Create a framebuffer to the specifications provided |
| */ |
| static int psbfb_create(struct psb_fbdev *fbdev, |
| struct drm_fb_helper_surface_size *sizes) |
| { |
| struct drm_device *dev = fbdev->psb_fb_helper.dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct fb_info *info; |
| struct drm_framebuffer *fb; |
| struct psb_framebuffer *psbfb = &fbdev->pfb; |
| struct drm_mode_fb_cmd2 mode_cmd; |
| int size; |
| int ret; |
| struct gtt_range *backing; |
| u32 bpp, depth; |
| int gtt_roll = 0; |
| int pitch_lines = 0; |
| |
| mode_cmd.width = sizes->surface_width; |
| mode_cmd.height = sizes->surface_height; |
| bpp = sizes->surface_bpp; |
| depth = sizes->surface_depth; |
| |
| /* No 24bit packed */ |
| if (bpp == 24) |
| bpp = 32; |
| |
| do { |
| /* |
| * Acceleration via the GTT requires pitch to be |
| * power of two aligned. Preferably page but less |
| * is ok with some fonts |
| */ |
| mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((bpp + 7) / 8), 4096 >> pitch_lines); |
| |
| size = mode_cmd.pitches[0] * mode_cmd.height; |
| size = ALIGN(size, PAGE_SIZE); |
| |
| /* Allocate the fb in the GTT with stolen page backing */ |
| backing = psbfb_alloc(dev, size); |
| |
| if (pitch_lines) |
| pitch_lines *= 2; |
| else |
| pitch_lines = 1; |
| gtt_roll++; |
| } while (backing == NULL && pitch_lines <= 16); |
| |
| /* The final pitch we accepted if we succeeded */ |
| pitch_lines /= 2; |
| |
| if (backing == NULL) { |
| /* |
| * We couldn't get the space we wanted, fall back to the |
| * display engine requirement instead. The HW requires |
| * the pitch to be 64 byte aligned |
| */ |
| |
| gtt_roll = 0; /* Don't use GTT accelerated scrolling */ |
| pitch_lines = 64; |
| |
| mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((bpp + 7) / 8), 64); |
| |
| size = mode_cmd.pitches[0] * mode_cmd.height; |
| size = ALIGN(size, PAGE_SIZE); |
| |
| /* Allocate the framebuffer in the GTT with stolen page backing */ |
| backing = psbfb_alloc(dev, size); |
| if (backing == NULL) |
| return -ENOMEM; |
| } |
| |
| memset(dev_priv->vram_addr + backing->offset, 0, size); |
| |
| info = drm_fb_helper_alloc_fbi(&fbdev->psb_fb_helper); |
| if (IS_ERR(info)) { |
| ret = PTR_ERR(info); |
| goto out; |
| } |
| info->par = fbdev; |
| |
| mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); |
| |
| ret = psb_framebuffer_init(dev, psbfb, &mode_cmd, backing); |
| if (ret) |
| goto out; |
| |
| fb = &psbfb->base; |
| psbfb->fbdev = info; |
| |
| fbdev->psb_fb_helper.fb = fb; |
| |
| drm_fb_helper_fill_fix(info, fb->pitches[0], fb->format->depth); |
| strcpy(info->fix.id, "psbdrmfb"); |
| |
| info->flags = FBINFO_DEFAULT; |
| if (dev_priv->ops->accel_2d && pitch_lines > 8) /* 2D engine */ |
| info->fbops = &psbfb_ops; |
| else if (gtt_roll) { /* GTT rolling seems best */ |
| info->fbops = &psbfb_roll_ops; |
| info->flags |= FBINFO_HWACCEL_YPAN; |
| } else /* Software */ |
| info->fbops = &psbfb_unaccel_ops; |
| |
| info->fix.smem_start = dev->mode_config.fb_base; |
| info->fix.smem_len = size; |
| info->fix.ywrapstep = gtt_roll; |
| info->fix.ypanstep = 0; |
| |
| /* Accessed stolen memory directly */ |
| info->screen_base = dev_priv->vram_addr + backing->offset; |
| info->screen_size = size; |
| |
| if (dev_priv->gtt.stolen_size) { |
| info->apertures->ranges[0].base = dev->mode_config.fb_base; |
| info->apertures->ranges[0].size = dev_priv->gtt.stolen_size; |
| } |
| |
| drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper, |
| sizes->fb_width, sizes->fb_height); |
| |
| info->fix.mmio_start = pci_resource_start(dev->pdev, 0); |
| info->fix.mmio_len = pci_resource_len(dev->pdev, 0); |
| |
| /* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */ |
| |
| dev_dbg(dev->dev, "allocated %dx%d fb\n", |
| psbfb->base.width, psbfb->base.height); |
| |
| return 0; |
| out: |
| psb_gtt_free_range(dev, backing); |
| return ret; |
| } |
| |
| /** |
| * psb_user_framebuffer_create - create framebuffer |
| * @dev: our DRM device |
| * @filp: client file |
| * @cmd: mode request |
| * |
| * Create a new framebuffer backed by a userspace GEM object |
| */ |
| static struct drm_framebuffer *psb_user_framebuffer_create |
| (struct drm_device *dev, struct drm_file *filp, |
| const struct drm_mode_fb_cmd2 *cmd) |
| { |
| struct gtt_range *r; |
| struct drm_gem_object *obj; |
| |
| /* |
| * Find the GEM object and thus the gtt range object that is |
| * to back this space |
| */ |
| obj = drm_gem_object_lookup(filp, cmd->handles[0]); |
| if (obj == NULL) |
| return ERR_PTR(-ENOENT); |
| |
| /* Let the core code do all the work */ |
| r = container_of(obj, struct gtt_range, gem); |
| return psb_framebuffer_create(dev, cmd, r); |
| } |
| |
| static int psbfb_probe(struct drm_fb_helper *helper, |
| struct drm_fb_helper_surface_size *sizes) |
| { |
| struct psb_fbdev *psb_fbdev = |
| container_of(helper, struct psb_fbdev, psb_fb_helper); |
| struct drm_device *dev = psb_fbdev->psb_fb_helper.dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int bytespp; |
| |
| bytespp = sizes->surface_bpp / 8; |
| if (bytespp == 3) /* no 24bit packed */ |
| bytespp = 4; |
| |
| /* If the mode will not fit in 32bit then switch to 16bit to get |
| a console on full resolution. The X mode setting server will |
| allocate its own 32bit GEM framebuffer */ |
| if (ALIGN(sizes->fb_width * bytespp, 64) * sizes->fb_height > |
| dev_priv->vram_stolen_size) { |
| sizes->surface_bpp = 16; |
| sizes->surface_depth = 16; |
| } |
| |
| return psbfb_create(psb_fbdev, sizes); |
| } |
| |
| static const struct drm_fb_helper_funcs psb_fb_helper_funcs = { |
| .fb_probe = psbfb_probe, |
| }; |
| |
| static int psb_fbdev_destroy(struct drm_device *dev, struct psb_fbdev *fbdev) |
| { |
| struct psb_framebuffer *psbfb = &fbdev->pfb; |
| |
| drm_fb_helper_unregister_fbi(&fbdev->psb_fb_helper); |
| |
| drm_fb_helper_fini(&fbdev->psb_fb_helper); |
| drm_framebuffer_unregister_private(&psbfb->base); |
| drm_framebuffer_cleanup(&psbfb->base); |
| |
| if (psbfb->base.obj[0]) |
| drm_gem_object_put_unlocked(psbfb->base.obj[0]); |
| return 0; |
| } |
| |
| int psb_fbdev_init(struct drm_device *dev) |
| { |
| struct psb_fbdev *fbdev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| fbdev = kzalloc(sizeof(struct psb_fbdev), GFP_KERNEL); |
| if (!fbdev) { |
| dev_err(dev->dev, "no memory\n"); |
| return -ENOMEM; |
| } |
| |
| dev_priv->fbdev = fbdev; |
| |
| drm_fb_helper_prepare(dev, &fbdev->psb_fb_helper, &psb_fb_helper_funcs); |
| |
| ret = drm_fb_helper_init(dev, &fbdev->psb_fb_helper, |
| INTELFB_CONN_LIMIT); |
| if (ret) |
| goto free; |
| |
| ret = drm_fb_helper_single_add_all_connectors(&fbdev->psb_fb_helper); |
| if (ret) |
| goto fini; |
| |
| /* disable all the possible outputs/crtcs before entering KMS mode */ |
| drm_helper_disable_unused_functions(dev); |
| |
| ret = drm_fb_helper_initial_config(&fbdev->psb_fb_helper, 32); |
| if (ret) |
| goto fini; |
| |
| return 0; |
| |
| fini: |
| drm_fb_helper_fini(&fbdev->psb_fb_helper); |
| free: |
| kfree(fbdev); |
| return ret; |
| } |
| |
| static void psb_fbdev_fini(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| |
| if (!dev_priv->fbdev) |
| return; |
| |
| psb_fbdev_destroy(dev, dev_priv->fbdev); |
| kfree(dev_priv->fbdev); |
| dev_priv->fbdev = NULL; |
| } |
| |
| static const struct drm_mode_config_funcs psb_mode_funcs = { |
| .fb_create = psb_user_framebuffer_create, |
| .output_poll_changed = drm_fb_helper_output_poll_changed, |
| }; |
| |
| static void psb_setup_outputs(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct drm_connector *connector; |
| |
| drm_mode_create_scaling_mode_property(dev); |
| |
| /* It is ok for this to fail - we just don't get backlight control */ |
| if (!dev_priv->backlight_property) |
| dev_priv->backlight_property = drm_property_create_range(dev, 0, |
| "backlight", 0, 100); |
| dev_priv->ops->output_init(dev); |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, |
| head) { |
| struct gma_encoder *gma_encoder = gma_attached_encoder(connector); |
| struct drm_encoder *encoder = &gma_encoder->base; |
| int crtc_mask = 0, clone_mask = 0; |
| |
| /* valid crtcs */ |
| switch (gma_encoder->type) { |
| case INTEL_OUTPUT_ANALOG: |
| crtc_mask = (1 << 0); |
| clone_mask = (1 << INTEL_OUTPUT_ANALOG); |
| break; |
| case INTEL_OUTPUT_SDVO: |
| crtc_mask = dev_priv->ops->sdvo_mask; |
| clone_mask = (1 << INTEL_OUTPUT_SDVO); |
| break; |
| case INTEL_OUTPUT_LVDS: |
| crtc_mask = dev_priv->ops->lvds_mask; |
| clone_mask = (1 << INTEL_OUTPUT_LVDS); |
| break; |
| case INTEL_OUTPUT_MIPI: |
| crtc_mask = (1 << 0); |
| clone_mask = (1 << INTEL_OUTPUT_MIPI); |
| break; |
| case INTEL_OUTPUT_MIPI2: |
| crtc_mask = (1 << 2); |
| clone_mask = (1 << INTEL_OUTPUT_MIPI2); |
| break; |
| case INTEL_OUTPUT_HDMI: |
| crtc_mask = dev_priv->ops->hdmi_mask; |
| clone_mask = (1 << INTEL_OUTPUT_HDMI); |
| break; |
| case INTEL_OUTPUT_DISPLAYPORT: |
| crtc_mask = (1 << 0) | (1 << 1); |
| clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT); |
| break; |
| case INTEL_OUTPUT_EDP: |
| crtc_mask = (1 << 1); |
| clone_mask = (1 << INTEL_OUTPUT_EDP); |
| } |
| encoder->possible_crtcs = crtc_mask; |
| encoder->possible_clones = |
| gma_connector_clones(dev, clone_mask); |
| } |
| } |
| |
| void psb_modeset_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; |
| int i; |
| |
| drm_mode_config_init(dev); |
| |
| dev->mode_config.min_width = 0; |
| dev->mode_config.min_height = 0; |
| |
| dev->mode_config.funcs = &psb_mode_funcs; |
| |
| /* set memory base */ |
| /* Oaktrail and Poulsbo should use BAR 2*/ |
| pci_read_config_dword(dev->pdev, PSB_BSM, (u32 *) |
| &(dev->mode_config.fb_base)); |
| |
| /* num pipes is 2 for PSB but 1 for Mrst */ |
| for (i = 0; i < dev_priv->num_pipe; i++) |
| psb_intel_crtc_init(dev, i, mode_dev); |
| |
| dev->mode_config.max_width = 4096; |
| dev->mode_config.max_height = 4096; |
| |
| psb_setup_outputs(dev); |
| |
| if (dev_priv->ops->errata) |
| dev_priv->ops->errata(dev); |
| |
| dev_priv->modeset = true; |
| } |
| |
| void psb_modeset_cleanup(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| if (dev_priv->modeset) { |
| drm_kms_helper_poll_fini(dev); |
| psb_fbdev_fini(dev); |
| drm_mode_config_cleanup(dev); |
| } |
| } |