| Binding for TI DaVinci Power Sleep Controller (PSC) |
| |
| The PSC provides power management, clock gating and reset functionality. It is |
| primarily used for clocking. |
| |
| Required properties: |
| - compatible: shall be one of: |
| - "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX |
| - "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX |
| - reg: physical base address and size of the controller's register area |
| - #clock-cells: from common clock binding; shall be set to 1 |
| - #power-domain-cells: from generic power domain binding; shall be set to 1. |
| - clocks: phandles to clocks corresponding to the clock-names property |
| - clock-names: list of parent clock names - depends on compatible value |
| - for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2", |
| "pll0_sysclk4", "pll0_sysclk6", "async1" |
| - for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3" |
| |
| Optional properties: |
| - #reset-cells: from reset binding; shall be set to 1 - only applicable when |
| at least one local domain provides a local reset. |
| |
| Consumers: |
| |
| Clock, power domain and reset consumers shall use the local power domain |
| module ID (LPSC) as the index corresponding to the clock cell. Refer to |
| the device-specific datasheet to find these numbers. NB: Most local |
| domains only provide a clock/power domain and not a reset. |
| |
| Examples: |
| |
| psc0: clock-controller@10000 { |
| compatible = "ti,da850-psc0"; |
| reg = <0x10000 0x1000>; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| #reset-cells = <1>; |
| clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, |
| <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>; |
| clock_names = "pll0_sysclk1", "pll0_sysclk2", |
| "pll0_sysclk4", "pll0_sysclk6", "async1"; |
| }; |
| psc1: clock-controller@227000 { |
| compatible = "ti,da850-psc1"; |
| reg = <0x227000 0x1000>; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>; |
| clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3"; |
| }; |
| |
| /* consumer */ |
| dsp: dsp@11800000 { |
| compatible = "ti,da850-dsp"; |
| reg = <0x11800000 0x40000>, |
| <0x11e00000 0x8000>, |
| <0x11f00000 0x8000>, |
| <0x01c14044 0x4>, |
| <0x01c14174 0x8>; |
| reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; |
| interrupt-parent = <&intc>; |
| interrupts = <28>; |
| clocks = <&psc0 15>; |
| power-domains = <&psc0 15>; |
| resets = <&psc0 15>; |
| }; |
| |
| Also see: |
| - Documentation/devicetree/bindings/clock/clock-bindings.txt |
| - Documentation/devicetree/bindings/power/power_domain.txt |
| - Documentation/devicetree/bindings/reset/reset.txt |
