| /* | |
| * Simplest possible simple frame-buffer driver, as a platform device | |
| * | |
| * Copyright (c) 2013, Stephen Warren | |
| * | |
| * Based on q40fb.c, which was: | |
| * Copyright (C) 2001 Richard Zidlicky <rz@linux-m68k.org> | |
| * | |
| * Also based on offb.c, which was: | |
| * Copyright (C) 1997 Geert Uytterhoeven | |
| * Copyright (C) 1996 Paul Mackerras | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/fb.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_data/simplefb.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/parser.h> | |
| #include <linux/regulator/consumer.h> | |
| static const struct fb_fix_screeninfo simplefb_fix = { | |
| .id = "simple", | |
| .type = FB_TYPE_PACKED_PIXELS, | |
| .visual = FB_VISUAL_TRUECOLOR, | |
| .accel = FB_ACCEL_NONE, | |
| }; | |
| static const struct fb_var_screeninfo simplefb_var = { | |
| .height = -1, | |
| .width = -1, | |
| .activate = FB_ACTIVATE_NOW, | |
| .vmode = FB_VMODE_NONINTERLACED, | |
| }; | |
| #define PSEUDO_PALETTE_SIZE 16 | |
| static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info) | |
| { | |
| u32 *pal = info->pseudo_palette; | |
| u32 cr = red >> (16 - info->var.red.length); | |
| u32 cg = green >> (16 - info->var.green.length); | |
| u32 cb = blue >> (16 - info->var.blue.length); | |
| u32 value; | |
| if (regno >= PSEUDO_PALETTE_SIZE) | |
| return -EINVAL; | |
| value = (cr << info->var.red.offset) | | |
| (cg << info->var.green.offset) | | |
| (cb << info->var.blue.offset); | |
| if (info->var.transp.length > 0) { | |
| u32 mask = (1 << info->var.transp.length) - 1; | |
| mask <<= info->var.transp.offset; | |
| value |= mask; | |
| } | |
| pal[regno] = value; | |
| return 0; | |
| } | |
| struct simplefb_par; | |
| static void simplefb_clocks_destroy(struct simplefb_par *par); | |
| static void simplefb_regulators_destroy(struct simplefb_par *par); | |
| static void simplefb_destroy(struct fb_info *info) | |
| { | |
| simplefb_regulators_destroy(info->par); | |
| simplefb_clocks_destroy(info->par); | |
| if (info->screen_base) | |
| iounmap(info->screen_base); | |
| } | |
| static struct fb_ops simplefb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_destroy = simplefb_destroy, | |
| .fb_setcolreg = simplefb_setcolreg, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| }; | |
| static struct simplefb_format simplefb_formats[] = SIMPLEFB_FORMATS; | |
| struct simplefb_params { | |
| u32 width; | |
| u32 height; | |
| u32 stride; | |
| struct simplefb_format *format; | |
| }; | |
| static int simplefb_parse_dt(struct platform_device *pdev, | |
| struct simplefb_params *params) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| int ret; | |
| const char *format; | |
| int i; | |
| ret = of_property_read_u32(np, "width", ¶ms->width); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Can't parse width property\n"); | |
| return ret; | |
| } | |
| ret = of_property_read_u32(np, "height", ¶ms->height); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Can't parse height property\n"); | |
| return ret; | |
| } | |
| ret = of_property_read_u32(np, "stride", ¶ms->stride); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Can't parse stride property\n"); | |
| return ret; | |
| } | |
| ret = of_property_read_string(np, "format", &format); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Can't parse format property\n"); | |
| return ret; | |
| } | |
| params->format = NULL; | |
| for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { | |
| if (strcmp(format, simplefb_formats[i].name)) | |
| continue; | |
| params->format = &simplefb_formats[i]; | |
| break; | |
| } | |
| if (!params->format) { | |
| dev_err(&pdev->dev, "Invalid format value\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int simplefb_parse_pd(struct platform_device *pdev, | |
| struct simplefb_params *params) | |
| { | |
| struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev); | |
| int i; | |
| params->width = pd->width; | |
| params->height = pd->height; | |
| params->stride = pd->stride; | |
| params->format = NULL; | |
| for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { | |
| if (strcmp(pd->format, simplefb_formats[i].name)) | |
| continue; | |
| params->format = &simplefb_formats[i]; | |
| break; | |
| } | |
| if (!params->format) { | |
| dev_err(&pdev->dev, "Invalid format value\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| struct simplefb_par { | |
| u32 palette[PSEUDO_PALETTE_SIZE]; | |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK | |
| bool clks_enabled; | |
| unsigned int clk_count; | |
| struct clk **clks; | |
| #endif | |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR | |
| bool regulators_enabled; | |
| u32 regulator_count; | |
| struct regulator **regulators; | |
| #endif | |
| }; | |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK | |
| /* | |
| * Clock handling code. | |
| * | |
| * Here we handle the clocks property of our "simple-framebuffer" dt node. | |
| * This is necessary so that we can make sure that any clocks needed by | |
| * the display engine that the bootloader set up for us (and for which it | |
| * provided a simplefb dt node), stay up, for the life of the simplefb | |
| * driver. | |
| * | |
| * When the driver unloads, we cleanly disable, and then release the clocks. | |
| * | |
| * We only complain about errors here, no action is taken as the most likely | |
| * error can only happen due to a mismatch between the bootloader which set | |
| * up simplefb, and the clock definitions in the device tree. Chances are | |
| * that there are no adverse effects, and if there are, a clean teardown of | |
| * the fb probe will not help us much either. So just complain and carry on, | |
| * and hope that the user actually gets a working fb at the end of things. | |
| */ | |
| static int simplefb_clocks_get(struct simplefb_par *par, | |
| struct platform_device *pdev) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| struct clk *clock; | |
| int i; | |
| if (dev_get_platdata(&pdev->dev) || !np) | |
| return 0; | |
| par->clk_count = of_clk_get_parent_count(np); | |
| if (!par->clk_count) | |
| return 0; | |
| par->clks = kcalloc(par->clk_count, sizeof(struct clk *), GFP_KERNEL); | |
| if (!par->clks) | |
| return -ENOMEM; | |
| for (i = 0; i < par->clk_count; i++) { | |
| clock = of_clk_get(np, i); | |
| if (IS_ERR(clock)) { | |
| if (PTR_ERR(clock) == -EPROBE_DEFER) { | |
| while (--i >= 0) { | |
| if (par->clks[i]) | |
| clk_put(par->clks[i]); | |
| } | |
| kfree(par->clks); | |
| return -EPROBE_DEFER; | |
| } | |
| dev_err(&pdev->dev, "%s: clock %d not found: %ld\n", | |
| __func__, i, PTR_ERR(clock)); | |
| continue; | |
| } | |
| par->clks[i] = clock; | |
| } | |
| return 0; | |
| } | |
| static void simplefb_clocks_enable(struct simplefb_par *par, | |
| struct platform_device *pdev) | |
| { | |
| int i, ret; | |
| for (i = 0; i < par->clk_count; i++) { | |
| if (par->clks[i]) { | |
| ret = clk_prepare_enable(par->clks[i]); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "%s: failed to enable clock %d: %d\n", | |
| __func__, i, ret); | |
| clk_put(par->clks[i]); | |
| par->clks[i] = NULL; | |
| } | |
| } | |
| } | |
| par->clks_enabled = true; | |
| } | |
| static void simplefb_clocks_destroy(struct simplefb_par *par) | |
| { | |
| int i; | |
| if (!par->clks) | |
| return; | |
| for (i = 0; i < par->clk_count; i++) { | |
| if (par->clks[i]) { | |
| if (par->clks_enabled) | |
| clk_disable_unprepare(par->clks[i]); | |
| clk_put(par->clks[i]); | |
| } | |
| } | |
| kfree(par->clks); | |
| } | |
| #else | |
| static int simplefb_clocks_get(struct simplefb_par *par, | |
| struct platform_device *pdev) { return 0; } | |
| static void simplefb_clocks_enable(struct simplefb_par *par, | |
| struct platform_device *pdev) { } | |
| static void simplefb_clocks_destroy(struct simplefb_par *par) { } | |
| #endif | |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR | |
| #define SUPPLY_SUFFIX "-supply" | |
| /* | |
| * Regulator handling code. | |
| * | |
| * Here we handle the num-supplies and vin*-supply properties of our | |
| * "simple-framebuffer" dt node. This is necessary so that we can make sure | |
| * that any regulators needed by the display hardware that the bootloader | |
| * set up for us (and for which it provided a simplefb dt node), stay up, | |
| * for the life of the simplefb driver. | |
| * | |
| * When the driver unloads, we cleanly disable, and then release the | |
| * regulators. | |
| * | |
| * We only complain about errors here, no action is taken as the most likely | |
| * error can only happen due to a mismatch between the bootloader which set | |
| * up simplefb, and the regulator definitions in the device tree. Chances are | |
| * that there are no adverse effects, and if there are, a clean teardown of | |
| * the fb probe will not help us much either. So just complain and carry on, | |
| * and hope that the user actually gets a working fb at the end of things. | |
| */ | |
| static int simplefb_regulators_get(struct simplefb_par *par, | |
| struct platform_device *pdev) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| struct property *prop; | |
| struct regulator *regulator; | |
| const char *p; | |
| int count = 0, i = 0; | |
| if (dev_get_platdata(&pdev->dev) || !np) | |
| return 0; | |
| /* Count the number of regulator supplies */ | |
| for_each_property_of_node(np, prop) { | |
| p = strstr(prop->name, SUPPLY_SUFFIX); | |
| if (p && p != prop->name) | |
| count++; | |
| } | |
| if (!count) | |
| return 0; | |
| par->regulators = devm_kcalloc(&pdev->dev, count, | |
| sizeof(struct regulator *), GFP_KERNEL); | |
| if (!par->regulators) | |
| return -ENOMEM; | |
| /* Get all the regulators */ | |
| for_each_property_of_node(np, prop) { | |
| char name[32]; /* 32 is max size of property name */ | |
| p = strstr(prop->name, SUPPLY_SUFFIX); | |
| if (!p || p == prop->name) | |
| continue; | |
| strlcpy(name, prop->name, | |
| strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1); | |
| regulator = devm_regulator_get_optional(&pdev->dev, name); | |
| if (IS_ERR(regulator)) { | |
| if (PTR_ERR(regulator) == -EPROBE_DEFER) | |
| return -EPROBE_DEFER; | |
| dev_err(&pdev->dev, "regulator %s not found: %ld\n", | |
| name, PTR_ERR(regulator)); | |
| continue; | |
| } | |
| par->regulators[i++] = regulator; | |
| } | |
| par->regulator_count = i; | |
| return 0; | |
| } | |
| static void simplefb_regulators_enable(struct simplefb_par *par, | |
| struct platform_device *pdev) | |
| { | |
| int i, ret; | |
| /* Enable all the regulators */ | |
| for (i = 0; i < par->regulator_count; i++) { | |
| ret = regulator_enable(par->regulators[i]); | |
| if (ret) { | |
| dev_err(&pdev->dev, | |
| "failed to enable regulator %d: %d\n", | |
| i, ret); | |
| devm_regulator_put(par->regulators[i]); | |
| par->regulators[i] = NULL; | |
| } | |
| } | |
| par->regulators_enabled = true; | |
| } | |
| static void simplefb_regulators_destroy(struct simplefb_par *par) | |
| { | |
| int i; | |
| if (!par->regulators || !par->regulators_enabled) | |
| return; | |
| for (i = 0; i < par->regulator_count; i++) | |
| if (par->regulators[i]) | |
| regulator_disable(par->regulators[i]); | |
| } | |
| #else | |
| static int simplefb_regulators_get(struct simplefb_par *par, | |
| struct platform_device *pdev) { return 0; } | |
| static void simplefb_regulators_enable(struct simplefb_par *par, | |
| struct platform_device *pdev) { } | |
| static void simplefb_regulators_destroy(struct simplefb_par *par) { } | |
| #endif | |
| static int simplefb_probe(struct platform_device *pdev) | |
| { | |
| int ret; | |
| struct simplefb_params params; | |
| struct fb_info *info; | |
| struct simplefb_par *par; | |
| struct resource *mem; | |
| if (fb_get_options("simplefb", NULL)) | |
| return -ENODEV; | |
| ret = -ENODEV; | |
| if (dev_get_platdata(&pdev->dev)) | |
| ret = simplefb_parse_pd(pdev, ¶ms); | |
| else if (pdev->dev.of_node) | |
| ret = simplefb_parse_dt(pdev, ¶ms); | |
| if (ret) | |
| return ret; | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!mem) { | |
| dev_err(&pdev->dev, "No memory resource\n"); | |
| return -EINVAL; | |
| } | |
| info = framebuffer_alloc(sizeof(struct simplefb_par), &pdev->dev); | |
| if (!info) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, info); | |
| par = info->par; | |
| info->fix = simplefb_fix; | |
| info->fix.smem_start = mem->start; | |
| info->fix.smem_len = resource_size(mem); | |
| info->fix.line_length = params.stride; | |
| info->var = simplefb_var; | |
| info->var.xres = params.width; | |
| info->var.yres = params.height; | |
| info->var.xres_virtual = params.width; | |
| info->var.yres_virtual = params.height; | |
| info->var.bits_per_pixel = params.format->bits_per_pixel; | |
| info->var.red = params.format->red; | |
| info->var.green = params.format->green; | |
| info->var.blue = params.format->blue; | |
| info->var.transp = params.format->transp; | |
| info->apertures = alloc_apertures(1); | |
| if (!info->apertures) { | |
| ret = -ENOMEM; | |
| goto error_fb_release; | |
| } | |
| info->apertures->ranges[0].base = info->fix.smem_start; | |
| info->apertures->ranges[0].size = info->fix.smem_len; | |
| info->fbops = &simplefb_ops; | |
| info->flags = FBINFO_DEFAULT | FBINFO_MISC_FIRMWARE; | |
| info->screen_base = ioremap_wc(info->fix.smem_start, | |
| info->fix.smem_len); | |
| if (!info->screen_base) { | |
| ret = -ENOMEM; | |
| goto error_fb_release; | |
| } | |
| info->pseudo_palette = par->palette; | |
| ret = simplefb_clocks_get(par, pdev); | |
| if (ret < 0) | |
| goto error_unmap; | |
| ret = simplefb_regulators_get(par, pdev); | |
| if (ret < 0) | |
| goto error_clocks; | |
| simplefb_clocks_enable(par, pdev); | |
| simplefb_regulators_enable(par, pdev); | |
| dev_info(&pdev->dev, "framebuffer at 0x%lx, 0x%x bytes, mapped to 0x%p\n", | |
| info->fix.smem_start, info->fix.smem_len, | |
| info->screen_base); | |
| dev_info(&pdev->dev, "format=%s, mode=%dx%dx%d, linelength=%d\n", | |
| params.format->name, | |
| info->var.xres, info->var.yres, | |
| info->var.bits_per_pixel, info->fix.line_length); | |
| ret = register_framebuffer(info); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret); | |
| goto error_regulators; | |
| } | |
| dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node); | |
| return 0; | |
| error_regulators: | |
| simplefb_regulators_destroy(par); | |
| error_clocks: | |
| simplefb_clocks_destroy(par); | |
| error_unmap: | |
| iounmap(info->screen_base); | |
| error_fb_release: | |
| framebuffer_release(info); | |
| return ret; | |
| } | |
| static int simplefb_remove(struct platform_device *pdev) | |
| { | |
| struct fb_info *info = platform_get_drvdata(pdev); | |
| unregister_framebuffer(info); | |
| framebuffer_release(info); | |
| return 0; | |
| } | |
| static const struct of_device_id simplefb_of_match[] = { | |
| { .compatible = "simple-framebuffer", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, simplefb_of_match); | |
| static struct platform_driver simplefb_driver = { | |
| .driver = { | |
| .name = "simple-framebuffer", | |
| .of_match_table = simplefb_of_match, | |
| }, | |
| .probe = simplefb_probe, | |
| .remove = simplefb_remove, | |
| }; | |
| static int __init simplefb_init(void) | |
| { | |
| int ret; | |
| struct device_node *np; | |
| ret = platform_driver_register(&simplefb_driver); | |
| if (ret) | |
| return ret; | |
| if (IS_ENABLED(CONFIG_OF_ADDRESS) && of_chosen) { | |
| for_each_child_of_node(of_chosen, np) { | |
| if (of_device_is_compatible(np, "simple-framebuffer")) | |
| of_platform_device_create(np, NULL, NULL); | |
| } | |
| } | |
| return 0; | |
| } | |
| fs_initcall(simplefb_init); | |
| MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>"); | |
| MODULE_DESCRIPTION("Simple framebuffer driver"); | |
| MODULE_LICENSE("GPL v2"); |