| /* | |
| * Simulated SCSI driver. | |
| * | |
| * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co | |
| * David Mosberger-Tang <davidm@hpl.hp.com> | |
| * Stephane Eranian <eranian@hpl.hp.com> | |
| * | |
| * 02/01/15 David Mosberger Updated for v2.5.1 | |
| * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33 | |
| */ | |
| #include <linux/blkdev.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/timer.h> | |
| #include <asm/irq.h> | |
| #include "hpsim_ssc.h" | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_host.h> | |
| #define DEBUG_SIMSCSI 0 | |
| #define SIMSCSI_REQ_QUEUE_LEN 64 | |
| #define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd" | |
| /* Simulator system calls: */ | |
| #define SSC_OPEN 50 | |
| #define SSC_CLOSE 51 | |
| #define SSC_READ 52 | |
| #define SSC_WRITE 53 | |
| #define SSC_GET_COMPLETION 54 | |
| #define SSC_WAIT_COMPLETION 55 | |
| #define SSC_WRITE_ACCESS 2 | |
| #define SSC_READ_ACCESS 1 | |
| #if DEBUG_SIMSCSI | |
| int simscsi_debug; | |
| # define DBG simscsi_debug | |
| #else | |
| # define DBG 0 | |
| #endif | |
| static struct Scsi_Host *host; | |
| static void simscsi_interrupt (unsigned long val); | |
| static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); | |
| struct disk_req { | |
| unsigned long addr; | |
| unsigned len; | |
| }; | |
| struct disk_stat { | |
| int fd; | |
| unsigned count; | |
| }; | |
| static int desc[16] = { | |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 | |
| }; | |
| static struct queue_entry { | |
| struct scsi_cmnd *sc; | |
| } queue[SIMSCSI_REQ_QUEUE_LEN]; | |
| static int rd, wr; | |
| static atomic_t num_reqs = ATOMIC_INIT(0); | |
| /* base name for default disks */ | |
| static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; | |
| #define MAX_ROOT_LEN 128 | |
| /* | |
| * used to setup a new base for disk images | |
| * to use /foo/bar/disk[a-z] as disk images | |
| * you have to specify simscsi=/foo/bar/disk on the command line | |
| */ | |
| static int __init | |
| simscsi_setup (char *s) | |
| { | |
| /* XXX Fix me we may need to strcpy() ? */ | |
| if (strlen(s) > MAX_ROOT_LEN) { | |
| printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", | |
| simscsi_root); | |
| } | |
| simscsi_root = s; | |
| return 1; | |
| } | |
| __setup("simscsi=", simscsi_setup); | |
| static void | |
| simscsi_interrupt (unsigned long val) | |
| { | |
| struct scsi_cmnd *sc; | |
| while ((sc = queue[rd].sc) != NULL) { | |
| atomic_dec(&num_reqs); | |
| queue[rd].sc = NULL; | |
| if (DBG) | |
| printk("simscsi_interrupt: done with %ld\n", sc->serial_number); | |
| (*sc->scsi_done)(sc); | |
| rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; | |
| } | |
| } | |
| static int | |
| simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, | |
| sector_t capacity, int ip[]) | |
| { | |
| ip[0] = 64; /* heads */ | |
| ip[1] = 32; /* sectors */ | |
| ip[2] = capacity >> 11; /* cylinders */ | |
| return 0; | |
| } | |
| static void | |
| simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) | |
| { | |
| int i; | |
| struct scatterlist *sl; | |
| struct disk_stat stat; | |
| struct disk_req req; | |
| stat.fd = desc[sc->device->id]; | |
| scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) { | |
| req.addr = __pa(sg_virt(sl)); | |
| req.len = sl->length; | |
| if (DBG) | |
| printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", | |
| mode == SSC_READ ? "read":"write", req.addr, offset, | |
| scsi_sg_count(sc) - i, sl->length); | |
| ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); | |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); | |
| /* should not happen in our case */ | |
| if (stat.count != req.len) { | |
| sc->result = DID_ERROR << 16; | |
| return; | |
| } | |
| offset += sl->length; | |
| } | |
| sc->result = GOOD; | |
| } | |
| /* | |
| * function handling both READ_6/WRITE_6 (non-scatter/gather mode) | |
| * commands. | |
| * Added 02/26/99 S.Eranian | |
| */ | |
| static void | |
| simscsi_readwrite6 (struct scsi_cmnd *sc, int mode) | |
| { | |
| unsigned long offset; | |
| offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; | |
| simscsi_sg_readwrite(sc, mode, offset); | |
| } | |
| static size_t | |
| simscsi_get_disk_size (int fd) | |
| { | |
| struct disk_stat stat; | |
| size_t bit, sectors = 0; | |
| struct disk_req req; | |
| char buf[512]; | |
| /* | |
| * This is a bit kludgey: the simulator doesn't provide a | |
| * direct way of determining the disk size, so we do a binary | |
| * search, assuming a maximum disk size of 128GB. | |
| */ | |
| for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { | |
| req.addr = __pa(&buf); | |
| req.len = sizeof(buf); | |
| ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); | |
| stat.fd = fd; | |
| ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); | |
| if (stat.count == sizeof(buf)) | |
| sectors |= bit; | |
| } | |
| return sectors - 1; /* return last valid sector number */ | |
| } | |
| static void | |
| simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) | |
| { | |
| unsigned long offset; | |
| offset = (((unsigned long)sc->cmnd[2] << 24) | |
| | ((unsigned long)sc->cmnd[3] << 16) | |
| | ((unsigned long)sc->cmnd[4] << 8) | |
| | ((unsigned long)sc->cmnd[5] << 0))*512UL; | |
| simscsi_sg_readwrite(sc, mode, offset); | |
| } | |
| static int | |
| simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) | |
| { | |
| unsigned int target_id = sc->device->id; | |
| char fname[MAX_ROOT_LEN+16]; | |
| size_t disk_size; | |
| char *buf; | |
| char localbuf[36]; | |
| #if DEBUG_SIMSCSI | |
| register long sp asm ("sp"); | |
| if (DBG) | |
| printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n", | |
| target_id, sc->cmnd[0], sc->serial_number, sp, done); | |
| #endif | |
| sc->result = DID_BAD_TARGET << 16; | |
| sc->scsi_done = done; | |
| if (target_id <= 15 && sc->device->lun == 0) { | |
| switch (sc->cmnd[0]) { | |
| case INQUIRY: | |
| if (scsi_bufflen(sc) < 35) { | |
| break; | |
| } | |
| sprintf (fname, "%s%c", simscsi_root, 'a' + target_id); | |
| desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, | |
| 0, 0, SSC_OPEN); | |
| if (desc[target_id] < 0) { | |
| /* disk doesn't exist... */ | |
| break; | |
| } | |
| buf = localbuf; | |
| buf[0] = 0; /* magnetic disk */ | |
| buf[1] = 0; /* not a removable medium */ | |
| buf[2] = 2; /* SCSI-2 compliant device */ | |
| buf[3] = 2; /* SCSI-2 response data format */ | |
| buf[4] = 31; /* additional length (bytes) */ | |
| buf[5] = 0; /* reserved */ | |
| buf[6] = 0; /* reserved */ | |
| buf[7] = 0; /* various flags */ | |
| memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); | |
| scsi_sg_copy_from_buffer(sc, buf, 36); | |
| sc->result = GOOD; | |
| break; | |
| case TEST_UNIT_READY: | |
| sc->result = GOOD; | |
| break; | |
| case READ_6: | |
| if (desc[target_id] < 0 ) | |
| break; | |
| simscsi_readwrite6(sc, SSC_READ); | |
| break; | |
| case READ_10: | |
| if (desc[target_id] < 0 ) | |
| break; | |
| simscsi_readwrite10(sc, SSC_READ); | |
| break; | |
| case WRITE_6: | |
| if (desc[target_id] < 0) | |
| break; | |
| simscsi_readwrite6(sc, SSC_WRITE); | |
| break; | |
| case WRITE_10: | |
| if (desc[target_id] < 0) | |
| break; | |
| simscsi_readwrite10(sc, SSC_WRITE); | |
| break; | |
| case READ_CAPACITY: | |
| if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) { | |
| break; | |
| } | |
| buf = localbuf; | |
| disk_size = simscsi_get_disk_size(desc[target_id]); | |
| buf[0] = (disk_size >> 24) & 0xff; | |
| buf[1] = (disk_size >> 16) & 0xff; | |
| buf[2] = (disk_size >> 8) & 0xff; | |
| buf[3] = (disk_size >> 0) & 0xff; | |
| /* set block size of 512 bytes: */ | |
| buf[4] = 0; | |
| buf[5] = 0; | |
| buf[6] = 2; | |
| buf[7] = 0; | |
| scsi_sg_copy_from_buffer(sc, buf, 8); | |
| sc->result = GOOD; | |
| break; | |
| case MODE_SENSE: | |
| case MODE_SENSE_10: | |
| /* sd.c uses this to determine whether disk does write-caching. */ | |
| scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page, | |
| PAGE_SIZE); | |
| sc->result = GOOD; | |
| break; | |
| case START_STOP: | |
| printk(KERN_ERR "START_STOP\n"); | |
| break; | |
| default: | |
| panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); | |
| } | |
| } | |
| if (sc->result == DID_BAD_TARGET) { | |
| sc->result |= DRIVER_SENSE << 24; | |
| sc->sense_buffer[0] = 0x70; | |
| sc->sense_buffer[2] = 0x00; | |
| } | |
| if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { | |
| panic("Attempt to queue command while command is pending!!"); | |
| } | |
| atomic_inc(&num_reqs); | |
| queue[wr].sc = sc; | |
| wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; | |
| tasklet_schedule(&simscsi_tasklet); | |
| return 0; | |
| } | |
| static DEF_SCSI_QCMD(simscsi_queuecommand) | |
| static int | |
| simscsi_host_reset (struct scsi_cmnd *sc) | |
| { | |
| printk(KERN_ERR "simscsi_host_reset: not implemented\n"); | |
| return 0; | |
| } | |
| static struct scsi_host_template driver_template = { | |
| .name = "simulated SCSI host adapter", | |
| .proc_name = "simscsi", | |
| .queuecommand = simscsi_queuecommand, | |
| .eh_host_reset_handler = simscsi_host_reset, | |
| .bios_param = simscsi_biosparam, | |
| .can_queue = SIMSCSI_REQ_QUEUE_LEN, | |
| .this_id = -1, | |
| .sg_tablesize = SG_ALL, | |
| .max_sectors = 1024, | |
| .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN, | |
| .use_clustering = DISABLE_CLUSTERING, | |
| }; | |
| static int __init | |
| simscsi_init(void) | |
| { | |
| int error; | |
| host = scsi_host_alloc(&driver_template, 0); | |
| if (!host) | |
| return -ENOMEM; | |
| error = scsi_add_host(host, NULL); | |
| if (error) | |
| goto free_host; | |
| scsi_scan_host(host); | |
| return 0; | |
| free_host: | |
| scsi_host_put(host); | |
| return error; | |
| } | |
| static void __exit | |
| simscsi_exit(void) | |
| { | |
| scsi_remove_host(host); | |
| scsi_host_put(host); | |
| } | |
| module_init(simscsi_init); | |
| module_exit(simscsi_exit); |