| /* | 
 |  * Copyright 2008 Advanced Micro Devices, Inc. | 
 |  * Copyright 2008 Red Hat Inc. | 
 |  * Copyright 2009 Christian König. | 
 |  * | 
 |  * Permission is hereby granted, free of charge, to any person obtaining a | 
 |  * copy of this software and associated documentation files (the "Software"), | 
 |  * to deal in the Software without restriction, including without limitation | 
 |  * the rights to use, copy, modify, merge, publish, distribute, sublicense, | 
 |  * and/or sell copies of the Software, and to permit persons to whom the | 
 |  * Software is furnished to do so, subject to the following conditions: | 
 |  * | 
 |  * The above copyright notice and this permission notice shall be included in | 
 |  * all copies or substantial portions of the Software. | 
 |  * | 
 |  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | 
 |  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
 |  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL | 
 |  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | 
 |  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | 
 |  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | 
 |  * OTHER DEALINGS IN THE SOFTWARE. | 
 |  * | 
 |  * Authors: Christian König | 
 |  */ | 
 | #include "drmP.h" | 
 | #include "radeon.h" | 
 | #include "radeon_reg.h" | 
 | #include "atom.h" | 
 |  | 
 | #define AUDIO_TIMER_INTERVALL 100 /* 1/10 sekund should be enough */ | 
 |  | 
 | /* | 
 |  * check if the chipset is supported | 
 |  */ | 
 | static int r600_audio_chipset_supported(struct radeon_device *rdev) | 
 | { | 
 | 	return (rdev->family >= CHIP_R600 && rdev->family < CHIP_CEDAR) | 
 | 		|| rdev->family == CHIP_RS600 | 
 | 		|| rdev->family == CHIP_RS690 | 
 | 		|| rdev->family == CHIP_RS740; | 
 | } | 
 |  | 
 | /* | 
 |  * current number of channels | 
 |  */ | 
 | int r600_audio_channels(struct radeon_device *rdev) | 
 | { | 
 | 	return (RREG32(R600_AUDIO_RATE_BPS_CHANNEL) & 0x7) + 1; | 
 | } | 
 |  | 
 | /* | 
 |  * current bits per sample | 
 |  */ | 
 | int r600_audio_bits_per_sample(struct radeon_device *rdev) | 
 | { | 
 | 	uint32_t value = (RREG32(R600_AUDIO_RATE_BPS_CHANNEL) & 0xF0) >> 4; | 
 | 	switch (value) { | 
 | 	case 0x0: return  8; | 
 | 	case 0x1: return 16; | 
 | 	case 0x2: return 20; | 
 | 	case 0x3: return 24; | 
 | 	case 0x4: return 32; | 
 | 	} | 
 |  | 
 | 	dev_err(rdev->dev, "Unknown bits per sample 0x%x using 16 instead\n", | 
 | 		(int)value); | 
 |  | 
 | 	return 16; | 
 | } | 
 |  | 
 | /* | 
 |  * current sampling rate in HZ | 
 |  */ | 
 | int r600_audio_rate(struct radeon_device *rdev) | 
 | { | 
 | 	uint32_t value = RREG32(R600_AUDIO_RATE_BPS_CHANNEL); | 
 | 	uint32_t result; | 
 |  | 
 | 	if (value & 0x4000) | 
 | 		result = 44100; | 
 | 	else | 
 | 		result = 48000; | 
 |  | 
 | 	result *= ((value >> 11) & 0x7) + 1; | 
 | 	result /= ((value >> 8) & 0x7) + 1; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* | 
 |  * iec 60958 status bits | 
 |  */ | 
 | uint8_t r600_audio_status_bits(struct radeon_device *rdev) | 
 | { | 
 | 	return RREG32(R600_AUDIO_STATUS_BITS) & 0xff; | 
 | } | 
 |  | 
 | /* | 
 |  * iec 60958 category code | 
 |  */ | 
 | uint8_t r600_audio_category_code(struct radeon_device *rdev) | 
 | { | 
 | 	return (RREG32(R600_AUDIO_STATUS_BITS) >> 8) & 0xff; | 
 | } | 
 |  | 
 | /* | 
 |  * schedule next audio update event | 
 |  */ | 
 | void r600_audio_schedule_polling(struct radeon_device *rdev) | 
 | { | 
 | 	mod_timer(&rdev->audio_timer, | 
 | 		jiffies + msecs_to_jiffies(AUDIO_TIMER_INTERVALL)); | 
 | } | 
 |  | 
 | /* | 
 |  * update all hdmi interfaces with current audio parameters | 
 |  */ | 
 | static void r600_audio_update_hdmi(unsigned long param) | 
 | { | 
 | 	struct radeon_device *rdev = (struct radeon_device *)param; | 
 | 	struct drm_device *dev = rdev->ddev; | 
 |  | 
 | 	int channels = r600_audio_channels(rdev); | 
 | 	int rate = r600_audio_rate(rdev); | 
 | 	int bps = r600_audio_bits_per_sample(rdev); | 
 | 	uint8_t status_bits = r600_audio_status_bits(rdev); | 
 | 	uint8_t category_code = r600_audio_category_code(rdev); | 
 |  | 
 | 	struct drm_encoder *encoder; | 
 | 	int changes = 0, still_going = 0; | 
 |  | 
 | 	changes |= channels != rdev->audio_channels; | 
 | 	changes |= rate != rdev->audio_rate; | 
 | 	changes |= bps != rdev->audio_bits_per_sample; | 
 | 	changes |= status_bits != rdev->audio_status_bits; | 
 | 	changes |= category_code != rdev->audio_category_code; | 
 |  | 
 | 	if (changes) { | 
 | 		rdev->audio_channels = channels; | 
 | 		rdev->audio_rate = rate; | 
 | 		rdev->audio_bits_per_sample = bps; | 
 | 		rdev->audio_status_bits = status_bits; | 
 | 		rdev->audio_category_code = category_code; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { | 
 | 		struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); | 
 | 		still_going |= radeon_encoder->audio_polling_active; | 
 | 		if (changes || r600_hdmi_buffer_status_changed(encoder)) | 
 | 			r600_hdmi_update_audio_settings(encoder); | 
 | 	} | 
 |  | 
 | 	if (still_going) | 
 | 		r600_audio_schedule_polling(rdev); | 
 | } | 
 |  | 
 | /* | 
 |  * turn on/off audio engine | 
 |  */ | 
 | static void r600_audio_engine_enable(struct radeon_device *rdev, bool enable) | 
 | { | 
 | 	DRM_INFO("%s audio support\n", enable ? "Enabling" : "Disabling"); | 
 | 	WREG32_P(R600_AUDIO_ENABLE, enable ? 0x81000000 : 0x0, ~0x81000000); | 
 | 	rdev->audio_enabled = enable; | 
 | } | 
 |  | 
 | /* | 
 |  * initialize the audio vars and register the update timer | 
 |  */ | 
 | int r600_audio_init(struct radeon_device *rdev) | 
 | { | 
 | 	if (!radeon_audio || !r600_audio_chipset_supported(rdev)) | 
 | 		return 0; | 
 |  | 
 | 	r600_audio_engine_enable(rdev, true); | 
 |  | 
 | 	rdev->audio_channels = -1; | 
 | 	rdev->audio_rate = -1; | 
 | 	rdev->audio_bits_per_sample = -1; | 
 | 	rdev->audio_status_bits = 0; | 
 | 	rdev->audio_category_code = 0; | 
 |  | 
 | 	setup_timer( | 
 | 		&rdev->audio_timer, | 
 | 		r600_audio_update_hdmi, | 
 | 		(unsigned long)rdev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * enable the polling timer, to check for status changes | 
 |  */ | 
 | void r600_audio_enable_polling(struct drm_encoder *encoder) | 
 | { | 
 | 	struct drm_device *dev = encoder->dev; | 
 | 	struct radeon_device *rdev = dev->dev_private; | 
 | 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); | 
 |  | 
 | 	DRM_DEBUG("r600_audio_enable_polling: %d\n", | 
 | 		radeon_encoder->audio_polling_active); | 
 | 	if (radeon_encoder->audio_polling_active) | 
 | 		return; | 
 |  | 
 | 	radeon_encoder->audio_polling_active = 1; | 
 | 	if (rdev->audio_enabled) | 
 | 		mod_timer(&rdev->audio_timer, jiffies + 1); | 
 | } | 
 |  | 
 | /* | 
 |  * disable the polling timer, so we get no more status updates | 
 |  */ | 
 | void r600_audio_disable_polling(struct drm_encoder *encoder) | 
 | { | 
 | 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); | 
 | 	DRM_DEBUG("r600_audio_disable_polling: %d\n", | 
 | 		radeon_encoder->audio_polling_active); | 
 | 	radeon_encoder->audio_polling_active = 0; | 
 | } | 
 |  | 
 | /* | 
 |  * atach the audio codec to the clock source of the encoder | 
 |  */ | 
 | void r600_audio_set_clock(struct drm_encoder *encoder, int clock) | 
 | { | 
 | 	struct drm_device *dev = encoder->dev; | 
 | 	struct radeon_device *rdev = dev->dev_private; | 
 | 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); | 
 | 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; | 
 | 	int base_rate = 48000; | 
 |  | 
 | 	switch (radeon_encoder->encoder_id) { | 
 | 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1: | 
 | 	case ENCODER_OBJECT_ID_INTERNAL_LVTM1: | 
 | 		WREG32_P(R600_AUDIO_TIMING, 0, ~0x301); | 
 | 		break; | 
 | 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: | 
 | 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: | 
 | 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: | 
 | 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: | 
 | 		WREG32_P(R600_AUDIO_TIMING, 0x100, ~0x301); | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(rdev->dev, "Unsupported encoder type 0x%02X\n", | 
 | 			  radeon_encoder->encoder_id); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	switch (dig->dig_encoder) { | 
 | 	case 0: | 
 | 		WREG32(R600_AUDIO_PLL1_MUL, base_rate * 50); | 
 | 		WREG32(R600_AUDIO_PLL1_DIV, clock * 100); | 
 | 		WREG32(R600_AUDIO_CLK_SRCSEL, 0); | 
 | 		break; | 
 |  | 
 | 	case 1: | 
 | 		WREG32(R600_AUDIO_PLL2_MUL, base_rate * 50); | 
 | 		WREG32(R600_AUDIO_PLL2_DIV, clock * 100); | 
 | 		WREG32(R600_AUDIO_CLK_SRCSEL, 1); | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(rdev->dev, "Unsupported DIG on encoder 0x%02X\n", | 
 | 			  radeon_encoder->encoder_id); | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * release the audio timer | 
 |  * TODO: How to do this correctly on SMP systems? | 
 |  */ | 
 | void r600_audio_fini(struct radeon_device *rdev) | 
 | { | 
 | 	if (!rdev->audio_enabled) | 
 | 		return; | 
 |  | 
 | 	del_timer(&rdev->audio_timer); | 
 |  | 
 | 	r600_audio_engine_enable(rdev, false); | 
 | } |