| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Freescale MXS On-Chip OTP driver |
| * |
| * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com> |
| * |
| * Based on the driver from Huang Shijie and Christoph G. Baumann |
| */ |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/stmp_device.h> |
| |
| /* OCOTP registers and bits */ |
| |
| #define BM_OCOTP_CTRL_RD_BANK_OPEN BIT(12) |
| #define BM_OCOTP_CTRL_ERROR BIT(9) |
| #define BM_OCOTP_CTRL_BUSY BIT(8) |
| |
| #define OCOTP_TIMEOUT 10000 |
| #define OCOTP_DATA_OFFSET 0x20 |
| |
| struct mxs_ocotp { |
| struct clk *clk; |
| void __iomem *base; |
| struct nvmem_device *nvmem; |
| }; |
| |
| static int mxs_ocotp_wait(struct mxs_ocotp *otp) |
| { |
| int timeout = OCOTP_TIMEOUT; |
| unsigned int status = 0; |
| |
| while (timeout--) { |
| status = readl(otp->base); |
| |
| if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR))) |
| break; |
| |
| cpu_relax(); |
| } |
| |
| if (status & BM_OCOTP_CTRL_BUSY) |
| return -EBUSY; |
| else if (status & BM_OCOTP_CTRL_ERROR) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int mxs_ocotp_read(void *context, unsigned int offset, |
| void *val, size_t bytes) |
| { |
| struct mxs_ocotp *otp = context; |
| u32 *buf = val; |
| int ret; |
| |
| ret = clk_enable(otp->clk); |
| if (ret) |
| return ret; |
| |
| writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR); |
| |
| ret = mxs_ocotp_wait(otp); |
| if (ret) |
| goto disable_clk; |
| |
| /* open OCOTP banks for read */ |
| writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET); |
| |
| /* approximately wait 33 hclk cycles */ |
| udelay(1); |
| |
| ret = mxs_ocotp_wait(otp); |
| if (ret) |
| goto close_banks; |
| |
| while (bytes) { |
| if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) { |
| /* fill up non-data register */ |
| *buf++ = 0; |
| } else { |
| *buf++ = readl(otp->base + offset); |
| } |
| |
| bytes -= 4; |
| offset += 4; |
| } |
| |
| close_banks: |
| /* close banks for power saving */ |
| writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR); |
| |
| disable_clk: |
| clk_disable(otp->clk); |
| |
| return ret; |
| } |
| |
| static struct nvmem_config ocotp_config = { |
| .name = "mxs-ocotp", |
| .stride = 16, |
| .word_size = 4, |
| .reg_read = mxs_ocotp_read, |
| }; |
| |
| struct mxs_data { |
| int size; |
| }; |
| |
| static const struct mxs_data imx23_data = { |
| .size = 0x220, |
| }; |
| |
| static const struct mxs_data imx28_data = { |
| .size = 0x2a0, |
| }; |
| |
| static const struct of_device_id mxs_ocotp_match[] = { |
| { .compatible = "fsl,imx23-ocotp", .data = &imx23_data }, |
| { .compatible = "fsl,imx28-ocotp", .data = &imx28_data }, |
| { /* sentinel */}, |
| }; |
| MODULE_DEVICE_TABLE(of, mxs_ocotp_match); |
| |
| static int mxs_ocotp_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct mxs_data *data; |
| struct mxs_ocotp *otp; |
| const struct of_device_id *match; |
| int ret; |
| |
| match = of_match_device(dev->driver->of_match_table, dev); |
| if (!match || !match->data) |
| return -EINVAL; |
| |
| otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL); |
| if (!otp) |
| return -ENOMEM; |
| |
| otp->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(otp->base)) |
| return PTR_ERR(otp->base); |
| |
| otp->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(otp->clk)) |
| return PTR_ERR(otp->clk); |
| |
| ret = clk_prepare(otp->clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to prepare clk: %d\n", ret); |
| return ret; |
| } |
| |
| data = match->data; |
| |
| ocotp_config.size = data->size; |
| ocotp_config.priv = otp; |
| ocotp_config.dev = dev; |
| otp->nvmem = devm_nvmem_register(dev, &ocotp_config); |
| if (IS_ERR(otp->nvmem)) { |
| ret = PTR_ERR(otp->nvmem); |
| goto err_clk; |
| } |
| |
| platform_set_drvdata(pdev, otp); |
| |
| return 0; |
| |
| err_clk: |
| clk_unprepare(otp->clk); |
| |
| return ret; |
| } |
| |
| static int mxs_ocotp_remove(struct platform_device *pdev) |
| { |
| struct mxs_ocotp *otp = platform_get_drvdata(pdev); |
| |
| clk_unprepare(otp->clk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mxs_ocotp_driver = { |
| .probe = mxs_ocotp_probe, |
| .remove = mxs_ocotp_remove, |
| .driver = { |
| .name = "mxs-ocotp", |
| .of_match_table = mxs_ocotp_match, |
| }, |
| }; |
| |
| module_platform_driver(mxs_ocotp_driver); |
| MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>"); |
| MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28"); |
| MODULE_LICENSE("GPL v2"); |