| /* |
| * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "acr_r352.h" |
| #include "hs_ucode.h" |
| |
| #include <core/gpuobj.h> |
| #include <core/firmware.h> |
| #include <engine/falcon.h> |
| #include <subdev/pmu.h> |
| #include <core/msgqueue.h> |
| #include <engine/sec2.h> |
| |
| /** |
| * struct acr_r352_flcn_bl_desc - DMEM bootloader descriptor |
| * @signature: 16B signature for secure code. 0s if no secure code |
| * @ctx_dma: DMA context to be used by BL while loading code/data |
| * @code_dma_base: 256B-aligned Physical FB Address where code is located |
| * (falcon's $xcbase register) |
| * @non_sec_code_off: offset from code_dma_base where the non-secure code is |
| * located. The offset must be multiple of 256 to help perf |
| * @non_sec_code_size: the size of the nonSecure code part. |
| * @sec_code_off: offset from code_dma_base where the secure code is |
| * located. The offset must be multiple of 256 to help perf |
| * @sec_code_size: offset from code_dma_base where the secure code is |
| * located. The offset must be multiple of 256 to help perf |
| * @code_entry_point: code entry point which will be invoked by BL after |
| * code is loaded. |
| * @data_dma_base: 256B aligned Physical FB Address where data is located. |
| * (falcon's $xdbase register) |
| * @data_size: size of data block. Should be multiple of 256B |
| * |
| * Structure used by the bootloader to load the rest of the code. This has |
| * to be filled by host and copied into DMEM at offset provided in the |
| * hsflcn_bl_desc.bl_desc_dmem_load_off. |
| */ |
| struct acr_r352_flcn_bl_desc { |
| u32 reserved[4]; |
| u32 signature[4]; |
| u32 ctx_dma; |
| u32 code_dma_base; |
| u32 non_sec_code_off; |
| u32 non_sec_code_size; |
| u32 sec_code_off; |
| u32 sec_code_size; |
| u32 code_entry_point; |
| u32 data_dma_base; |
| u32 data_size; |
| u32 code_dma_base1; |
| u32 data_dma_base1; |
| }; |
| |
| /** |
| * acr_r352_generate_flcn_bl_desc - generate generic BL descriptor for LS image |
| */ |
| static void |
| acr_r352_generate_flcn_bl_desc(const struct nvkm_acr *acr, |
| const struct ls_ucode_img *img, u64 wpr_addr, |
| void *_desc) |
| { |
| struct acr_r352_flcn_bl_desc *desc = _desc; |
| const struct ls_ucode_img_desc *pdesc = &img->ucode_desc; |
| u64 base, addr_code, addr_data; |
| |
| base = wpr_addr + img->ucode_off + pdesc->app_start_offset; |
| addr_code = (base + pdesc->app_resident_code_offset) >> 8; |
| addr_data = (base + pdesc->app_resident_data_offset) >> 8; |
| |
| desc->ctx_dma = FALCON_DMAIDX_UCODE; |
| desc->code_dma_base = lower_32_bits(addr_code); |
| desc->code_dma_base1 = upper_32_bits(addr_code); |
| desc->non_sec_code_off = pdesc->app_resident_code_offset; |
| desc->non_sec_code_size = pdesc->app_resident_code_size; |
| desc->code_entry_point = pdesc->app_imem_entry; |
| desc->data_dma_base = lower_32_bits(addr_data); |
| desc->data_dma_base1 = upper_32_bits(addr_data); |
| desc->data_size = pdesc->app_resident_data_size; |
| } |
| |
| |
| /** |
| * struct hsflcn_acr_desc - data section of the HS firmware |
| * |
| * This header is to be copied at the beginning of DMEM by the HS bootloader. |
| * |
| * @signature: signature of ACR ucode |
| * @wpr_region_id: region ID holding the WPR header and its details |
| * @wpr_offset: offset from the WPR region holding the wpr header |
| * @regions: region descriptors |
| * @nonwpr_ucode_blob_size: size of LS blob |
| * @nonwpr_ucode_blob_start: FB location of LS blob is |
| */ |
| struct hsflcn_acr_desc { |
| union { |
| u8 reserved_dmem[0x200]; |
| u32 signatures[4]; |
| } ucode_reserved_space; |
| u32 wpr_region_id; |
| u32 wpr_offset; |
| u32 mmu_mem_range; |
| #define FLCN_ACR_MAX_REGIONS 2 |
| struct { |
| u32 no_regions; |
| struct { |
| u32 start_addr; |
| u32 end_addr; |
| u32 region_id; |
| u32 read_mask; |
| u32 write_mask; |
| u32 client_mask; |
| } region_props[FLCN_ACR_MAX_REGIONS]; |
| } regions; |
| u32 ucode_blob_size; |
| u64 ucode_blob_base __aligned(8); |
| struct { |
| u32 vpr_enabled; |
| u32 vpr_start; |
| u32 vpr_end; |
| u32 hdcp_policies; |
| } vpr_desc; |
| }; |
| |
| |
| /* |
| * Low-secure blob creation |
| */ |
| |
| /** |
| * struct acr_r352_lsf_lsb_header - LS firmware header |
| * @signature: signature to verify the firmware against |
| * @ucode_off: offset of the ucode blob in the WPR region. The ucode |
| * blob contains the bootloader, code and data of the |
| * LS falcon |
| * @ucode_size: size of the ucode blob, including bootloader |
| * @data_size: size of the ucode blob data |
| * @bl_code_size: size of the bootloader code |
| * @bl_imem_off: offset in imem of the bootloader |
| * @bl_data_off: offset of the bootloader data in WPR region |
| * @bl_data_size: size of the bootloader data |
| * @app_code_off: offset of the app code relative to ucode_off |
| * @app_code_size: size of the app code |
| * @app_data_off: offset of the app data relative to ucode_off |
| * @app_data_size: size of the app data |
| * @flags: flags for the secure bootloader |
| * |
| * This structure is written into the WPR region for each managed falcon. Each |
| * instance is referenced by the lsb_offset member of the corresponding |
| * lsf_wpr_header. |
| */ |
| struct acr_r352_lsf_lsb_header { |
| /** |
| * LS falcon signatures |
| * @prd_keys: signature to use in production mode |
| * @dgb_keys: signature to use in debug mode |
| * @b_prd_present: whether the production key is present |
| * @b_dgb_present: whether the debug key is present |
| * @falcon_id: ID of the falcon the ucode applies to |
| */ |
| struct { |
| u8 prd_keys[2][16]; |
| u8 dbg_keys[2][16]; |
| u32 b_prd_present; |
| u32 b_dbg_present; |
| u32 falcon_id; |
| } signature; |
| u32 ucode_off; |
| u32 ucode_size; |
| u32 data_size; |
| u32 bl_code_size; |
| u32 bl_imem_off; |
| u32 bl_data_off; |
| u32 bl_data_size; |
| u32 app_code_off; |
| u32 app_code_size; |
| u32 app_data_off; |
| u32 app_data_size; |
| u32 flags; |
| }; |
| |
| /** |
| * struct acr_r352_lsf_wpr_header - LS blob WPR Header |
| * @falcon_id: LS falcon ID |
| * @lsb_offset: offset of the lsb_lsf_header in the WPR region |
| * @bootstrap_owner: secure falcon reponsible for bootstrapping the LS falcon |
| * @lazy_bootstrap: skip bootstrapping by ACR |
| * @status: bootstrapping status |
| * |
| * An array of these is written at the beginning of the WPR region, one for |
| * each managed falcon. The array is terminated by an instance which falcon_id |
| * is LSF_FALCON_ID_INVALID. |
| */ |
| struct acr_r352_lsf_wpr_header { |
| u32 falcon_id; |
| u32 lsb_offset; |
| u32 bootstrap_owner; |
| u32 lazy_bootstrap; |
| u32 status; |
| #define LSF_IMAGE_STATUS_NONE 0 |
| #define LSF_IMAGE_STATUS_COPY 1 |
| #define LSF_IMAGE_STATUS_VALIDATION_CODE_FAILED 2 |
| #define LSF_IMAGE_STATUS_VALIDATION_DATA_FAILED 3 |
| #define LSF_IMAGE_STATUS_VALIDATION_DONE 4 |
| #define LSF_IMAGE_STATUS_VALIDATION_SKIPPED 5 |
| #define LSF_IMAGE_STATUS_BOOTSTRAP_READY 6 |
| }; |
| |
| /** |
| * struct ls_ucode_img_r352 - ucode image augmented with r352 headers |
| */ |
| struct ls_ucode_img_r352 { |
| struct ls_ucode_img base; |
| |
| const struct acr_r352_lsf_func *func; |
| |
| struct acr_r352_lsf_wpr_header wpr_header; |
| struct acr_r352_lsf_lsb_header lsb_header; |
| }; |
| #define ls_ucode_img_r352(i) container_of(i, struct ls_ucode_img_r352, base) |
| |
| /** |
| * ls_ucode_img_load() - create a lsf_ucode_img and load it |
| */ |
| struct ls_ucode_img * |
| acr_r352_ls_ucode_img_load(const struct acr_r352 *acr, |
| const struct nvkm_secboot *sb, |
| enum nvkm_secboot_falcon falcon_id) |
| { |
| const struct nvkm_subdev *subdev = acr->base.subdev; |
| const struct acr_r352_ls_func *func = acr->func->ls_func[falcon_id]; |
| struct ls_ucode_img_r352 *img; |
| int ret; |
| |
| img = kzalloc(sizeof(*img), GFP_KERNEL); |
| if (!img) |
| return ERR_PTR(-ENOMEM); |
| |
| img->base.falcon_id = falcon_id; |
| |
| ret = func->load(sb, func->version_max, &img->base); |
| if (ret < 0) { |
| kfree(img->base.ucode_data); |
| kfree(img->base.sig); |
| kfree(img); |
| return ERR_PTR(ret); |
| } |
| |
| img->func = func->version[ret]; |
| |
| /* Check that the signature size matches our expectations... */ |
| if (img->base.sig_size != sizeof(img->lsb_header.signature)) { |
| nvkm_error(subdev, "invalid signature size for %s falcon!\n", |
| nvkm_secboot_falcon_name[falcon_id]); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* Copy signature to the right place */ |
| memcpy(&img->lsb_header.signature, img->base.sig, img->base.sig_size); |
| |
| /* not needed? the signature should already have the right value */ |
| img->lsb_header.signature.falcon_id = falcon_id; |
| |
| return &img->base; |
| } |
| |
| #define LSF_LSB_HEADER_ALIGN 256 |
| #define LSF_BL_DATA_ALIGN 256 |
| #define LSF_BL_DATA_SIZE_ALIGN 256 |
| #define LSF_BL_CODE_SIZE_ALIGN 256 |
| #define LSF_UCODE_DATA_ALIGN 4096 |
| |
| /** |
| * acr_r352_ls_img_fill_headers - fill the WPR and LSB headers of an image |
| * @acr: ACR to use |
| * @img: image to generate for |
| * @offset: offset in the WPR region where this image starts |
| * |
| * Allocate space in the WPR area from offset and write the WPR and LSB headers |
| * accordingly. |
| * |
| * Return: offset at the end of this image. |
| */ |
| static u32 |
| acr_r352_ls_img_fill_headers(struct acr_r352 *acr, |
| struct ls_ucode_img_r352 *img, u32 offset) |
| { |
| struct ls_ucode_img *_img = &img->base; |
| struct acr_r352_lsf_wpr_header *whdr = &img->wpr_header; |
| struct acr_r352_lsf_lsb_header *lhdr = &img->lsb_header; |
| struct ls_ucode_img_desc *desc = &_img->ucode_desc; |
| const struct acr_r352_lsf_func *func = img->func; |
| |
| /* Fill WPR header */ |
| whdr->falcon_id = _img->falcon_id; |
| whdr->bootstrap_owner = acr->base.boot_falcon; |
| whdr->status = LSF_IMAGE_STATUS_COPY; |
| |
| /* Skip bootstrapping falcons started by someone else than ACR */ |
| if (acr->lazy_bootstrap & BIT(_img->falcon_id)) |
| whdr->lazy_bootstrap = 1; |
| |
| /* Align, save off, and include an LSB header size */ |
| offset = ALIGN(offset, LSF_LSB_HEADER_ALIGN); |
| whdr->lsb_offset = offset; |
| offset += sizeof(*lhdr); |
| |
| /* |
| * Align, save off, and include the original (static) ucode |
| * image size |
| */ |
| offset = ALIGN(offset, LSF_UCODE_DATA_ALIGN); |
| _img->ucode_off = lhdr->ucode_off = offset; |
| offset += _img->ucode_size; |
| |
| /* |
| * For falcons that use a boot loader (BL), we append a loader |
| * desc structure on the end of the ucode image and consider |
| * this the boot loader data. The host will then copy the loader |
| * desc args to this space within the WPR region (before locking |
| * down) and the HS bin will then copy them to DMEM 0 for the |
| * loader. |
| */ |
| lhdr->bl_code_size = ALIGN(desc->bootloader_size, |
| LSF_BL_CODE_SIZE_ALIGN); |
| lhdr->ucode_size = ALIGN(desc->app_resident_data_offset, |
| LSF_BL_CODE_SIZE_ALIGN) + lhdr->bl_code_size; |
| lhdr->data_size = ALIGN(desc->app_size, LSF_BL_CODE_SIZE_ALIGN) + |
| lhdr->bl_code_size - lhdr->ucode_size; |
| /* |
| * Though the BL is located at 0th offset of the image, the VA |
| * is different to make sure that it doesn't collide the actual |
| * OS VA range |
| */ |
| lhdr->bl_imem_off = desc->bootloader_imem_offset; |
| lhdr->app_code_off = desc->app_start_offset + |
| desc->app_resident_code_offset; |
| lhdr->app_code_size = desc->app_resident_code_size; |
| lhdr->app_data_off = desc->app_start_offset + |
| desc->app_resident_data_offset; |
| lhdr->app_data_size = desc->app_resident_data_size; |
| |
| lhdr->flags = func->lhdr_flags; |
| if (_img->falcon_id == acr->base.boot_falcon) |
| lhdr->flags |= LSF_FLAG_DMACTL_REQ_CTX; |
| |
| /* Align and save off BL descriptor size */ |
| lhdr->bl_data_size = ALIGN(func->bl_desc_size, LSF_BL_DATA_SIZE_ALIGN); |
| |
| /* |
| * Align, save off, and include the additional BL data |
| */ |
| offset = ALIGN(offset, LSF_BL_DATA_ALIGN); |
| lhdr->bl_data_off = offset; |
| offset += lhdr->bl_data_size; |
| |
| return offset; |
| } |
| |
| /** |
| * acr_r352_ls_fill_headers - fill WPR and LSB headers of all managed images |
| */ |
| int |
| acr_r352_ls_fill_headers(struct acr_r352 *acr, struct list_head *imgs) |
| { |
| struct ls_ucode_img_r352 *img; |
| struct list_head *l; |
| u32 count = 0; |
| u32 offset; |
| |
| /* Count the number of images to manage */ |
| list_for_each(l, imgs) |
| count++; |
| |
| /* |
| * Start with an array of WPR headers at the base of the WPR. |
| * The expectation here is that the secure falcon will do a single DMA |
| * read of this array and cache it internally so it's ok to pack these. |
| * Also, we add 1 to the falcon count to indicate the end of the array. |
| */ |
| offset = sizeof(img->wpr_header) * (count + 1); |
| |
| /* |
| * Walk the managed falcons, accounting for the LSB structs |
| * as well as the ucode images. |
| */ |
| list_for_each_entry(img, imgs, base.node) { |
| offset = acr_r352_ls_img_fill_headers(acr, img, offset); |
| } |
| |
| return offset; |
| } |
| |
| /** |
| * acr_r352_ls_write_wpr - write the WPR blob contents |
| */ |
| int |
| acr_r352_ls_write_wpr(struct acr_r352 *acr, struct list_head *imgs, |
| struct nvkm_gpuobj *wpr_blob, u64 wpr_addr) |
| { |
| struct ls_ucode_img *_img; |
| u32 pos = 0; |
| u32 max_desc_size = 0; |
| u8 *gdesc; |
| |
| /* Figure out how large we need gdesc to be. */ |
| list_for_each_entry(_img, imgs, node) { |
| struct ls_ucode_img_r352 *img = ls_ucode_img_r352(_img); |
| const struct acr_r352_lsf_func *ls_func = img->func; |
| |
| max_desc_size = max(max_desc_size, ls_func->bl_desc_size); |
| } |
| |
| gdesc = kmalloc(max_desc_size, GFP_KERNEL); |
| if (!gdesc) |
| return -ENOMEM; |
| |
| nvkm_kmap(wpr_blob); |
| |
| list_for_each_entry(_img, imgs, node) { |
| struct ls_ucode_img_r352 *img = ls_ucode_img_r352(_img); |
| const struct acr_r352_lsf_func *ls_func = img->func; |
| |
| nvkm_gpuobj_memcpy_to(wpr_blob, pos, &img->wpr_header, |
| sizeof(img->wpr_header)); |
| |
| nvkm_gpuobj_memcpy_to(wpr_blob, img->wpr_header.lsb_offset, |
| &img->lsb_header, sizeof(img->lsb_header)); |
| |
| /* Generate and write BL descriptor */ |
| memset(gdesc, 0, ls_func->bl_desc_size); |
| ls_func->generate_bl_desc(&acr->base, _img, wpr_addr, gdesc); |
| |
| nvkm_gpuobj_memcpy_to(wpr_blob, img->lsb_header.bl_data_off, |
| gdesc, ls_func->bl_desc_size); |
| |
| /* Copy ucode */ |
| nvkm_gpuobj_memcpy_to(wpr_blob, img->lsb_header.ucode_off, |
| _img->ucode_data, _img->ucode_size); |
| |
| pos += sizeof(img->wpr_header); |
| } |
| |
| nvkm_wo32(wpr_blob, pos, NVKM_SECBOOT_FALCON_INVALID); |
| |
| nvkm_done(wpr_blob); |
| |
| kfree(gdesc); |
| |
| return 0; |
| } |
| |
| /* Both size and address of WPR need to be 256K-aligned */ |
| #define WPR_ALIGNMENT 0x40000 |
| /** |
| * acr_r352_prepare_ls_blob() - prepare the LS blob |
| * |
| * For each securely managed falcon, load the FW, signatures and bootloaders and |
| * prepare a ucode blob. Then, compute the offsets in the WPR region for each |
| * blob, and finally write the headers and ucode blobs into a GPU object that |
| * will be copied into the WPR region by the HS firmware. |
| */ |
| static int |
| acr_r352_prepare_ls_blob(struct acr_r352 *acr, struct nvkm_secboot *sb) |
| { |
| const struct nvkm_subdev *subdev = acr->base.subdev; |
| struct list_head imgs; |
| struct ls_ucode_img *img, *t; |
| unsigned long managed_falcons = acr->base.managed_falcons; |
| u64 wpr_addr = sb->wpr_addr; |
| u32 wpr_size = sb->wpr_size; |
| int managed_count = 0; |
| u32 image_wpr_size, ls_blob_size; |
| int falcon_id; |
| int ret; |
| |
| INIT_LIST_HEAD(&imgs); |
| |
| /* Load all LS blobs */ |
| for_each_set_bit(falcon_id, &managed_falcons, NVKM_SECBOOT_FALCON_END) { |
| struct ls_ucode_img *img; |
| |
| img = acr->func->ls_ucode_img_load(acr, sb, falcon_id); |
| if (IS_ERR(img)) { |
| if (acr->base.optional_falcons & BIT(falcon_id)) { |
| managed_falcons &= ~BIT(falcon_id); |
| nvkm_info(subdev, "skipping %s falcon...\n", |
| nvkm_secboot_falcon_name[falcon_id]); |
| continue; |
| } |
| ret = PTR_ERR(img); |
| goto cleanup; |
| } |
| |
| list_add_tail(&img->node, &imgs); |
| managed_count++; |
| } |
| |
| /* Commit the actual list of falcons we will manage from now on */ |
| acr->base.managed_falcons = managed_falcons; |
| |
| /* |
| * If the boot falcon has a firmare, let it manage the bootstrap of other |
| * falcons. |
| */ |
| if (acr->func->ls_func[acr->base.boot_falcon] && |
| (managed_falcons & BIT(acr->base.boot_falcon))) { |
| for_each_set_bit(falcon_id, &managed_falcons, |
| NVKM_SECBOOT_FALCON_END) { |
| if (falcon_id == acr->base.boot_falcon) |
| continue; |
| |
| acr->lazy_bootstrap |= BIT(falcon_id); |
| } |
| } |
| |
| /* |
| * Fill the WPR and LSF headers with the right offsets and compute |
| * required WPR size |
| */ |
| image_wpr_size = acr->func->ls_fill_headers(acr, &imgs); |
| image_wpr_size = ALIGN(image_wpr_size, WPR_ALIGNMENT); |
| |
| ls_blob_size = image_wpr_size; |
| |
| /* |
| * If we need a shadow area, allocate twice the size and use the |
| * upper half as WPR |
| */ |
| if (wpr_size == 0 && acr->func->shadow_blob) |
| ls_blob_size *= 2; |
| |
| /* Allocate GPU object that will contain the WPR region */ |
| ret = nvkm_gpuobj_new(subdev->device, ls_blob_size, WPR_ALIGNMENT, |
| false, NULL, &acr->ls_blob); |
| if (ret) |
| goto cleanup; |
| |
| nvkm_debug(subdev, "%d managed LS falcons, WPR size is %d bytes\n", |
| managed_count, image_wpr_size); |
| |
| /* If WPR address and size are not fixed, set them to fit the LS blob */ |
| if (wpr_size == 0) { |
| wpr_addr = acr->ls_blob->addr; |
| if (acr->func->shadow_blob) |
| wpr_addr += acr->ls_blob->size / 2; |
| |
| wpr_size = image_wpr_size; |
| /* |
| * But if the WPR region is set by the bootloader, it is illegal for |
| * the HS blob to be larger than this region. |
| */ |
| } else if (image_wpr_size > wpr_size) { |
| nvkm_error(subdev, "WPR region too small for FW blob!\n"); |
| nvkm_error(subdev, "required: %dB\n", image_wpr_size); |
| nvkm_error(subdev, "available: %dB\n", wpr_size); |
| ret = -ENOSPC; |
| goto cleanup; |
| } |
| |
| /* Write LS blob */ |
| ret = acr->func->ls_write_wpr(acr, &imgs, acr->ls_blob, wpr_addr); |
| if (ret) |
| nvkm_gpuobj_del(&acr->ls_blob); |
| |
| cleanup: |
| list_for_each_entry_safe(img, t, &imgs, node) { |
| kfree(img->ucode_data); |
| kfree(img->sig); |
| kfree(img); |
| } |
| |
| return ret; |
| } |
| |
| |
| |
| |
| void |
| acr_r352_fixup_hs_desc(struct acr_r352 *acr, struct nvkm_secboot *sb, |
| void *_desc) |
| { |
| struct hsflcn_acr_desc *desc = _desc; |
| struct nvkm_gpuobj *ls_blob = acr->ls_blob; |
| |
| /* WPR region information if WPR is not fixed */ |
| if (sb->wpr_size == 0) { |
| u64 wpr_start = ls_blob->addr; |
| u64 wpr_end = wpr_start + ls_blob->size; |
| |
| desc->wpr_region_id = 1; |
| desc->regions.no_regions = 2; |
| desc->regions.region_props[0].start_addr = wpr_start >> 8; |
| desc->regions.region_props[0].end_addr = wpr_end >> 8; |
| desc->regions.region_props[0].region_id = 1; |
| desc->regions.region_props[0].read_mask = 0xf; |
| desc->regions.region_props[0].write_mask = 0xc; |
| desc->regions.region_props[0].client_mask = 0x2; |
| } else { |
| desc->ucode_blob_base = ls_blob->addr; |
| desc->ucode_blob_size = ls_blob->size; |
| } |
| } |
| |
| static void |
| acr_r352_generate_hs_bl_desc(const struct hsf_load_header *hdr, void *_bl_desc, |
| u64 offset) |
| { |
| struct acr_r352_flcn_bl_desc *bl_desc = _bl_desc; |
| u64 addr_code, addr_data; |
| |
| addr_code = offset >> 8; |
| addr_data = (offset + hdr->data_dma_base) >> 8; |
| |
| bl_desc->ctx_dma = FALCON_DMAIDX_VIRT; |
| bl_desc->code_dma_base = lower_32_bits(addr_code); |
| bl_desc->non_sec_code_off = hdr->non_sec_code_off; |
| bl_desc->non_sec_code_size = hdr->non_sec_code_size; |
| bl_desc->sec_code_off = hsf_load_header_app_off(hdr, 0); |
| bl_desc->sec_code_size = hsf_load_header_app_size(hdr, 0); |
| bl_desc->code_entry_point = 0; |
| bl_desc->data_dma_base = lower_32_bits(addr_data); |
| bl_desc->data_size = hdr->data_size; |
| } |
| |
| /** |
| * acr_r352_prepare_hs_blob - load and prepare a HS blob and BL descriptor |
| * |
| * @sb secure boot instance to prepare for |
| * @fw name of the HS firmware to load |
| * @blob pointer to gpuobj that will be allocated to receive the HS FW payload |
| * @bl_desc pointer to the BL descriptor to write for this firmware |
| * @patch whether we should patch the HS descriptor (only for HS loaders) |
| */ |
| static int |
| acr_r352_prepare_hs_blob(struct acr_r352 *acr, struct nvkm_secboot *sb, |
| const char *fw, struct nvkm_gpuobj **blob, |
| struct hsf_load_header *load_header, bool patch) |
| { |
| struct nvkm_subdev *subdev = &sb->subdev; |
| void *acr_image; |
| struct fw_bin_header *hsbin_hdr; |
| struct hsf_fw_header *fw_hdr; |
| struct hsf_load_header *load_hdr; |
| void *acr_data; |
| int ret; |
| |
| acr_image = hs_ucode_load_blob(subdev, sb->boot_falcon, fw); |
| if (IS_ERR(acr_image)) |
| return PTR_ERR(acr_image); |
| |
| hsbin_hdr = acr_image; |
| fw_hdr = acr_image + hsbin_hdr->header_offset; |
| load_hdr = acr_image + fw_hdr->hdr_offset; |
| acr_data = acr_image + hsbin_hdr->data_offset; |
| |
| /* Patch descriptor with WPR information? */ |
| if (patch) { |
| struct hsflcn_acr_desc *desc; |
| |
| desc = acr_data + load_hdr->data_dma_base; |
| acr->func->fixup_hs_desc(acr, sb, desc); |
| } |
| |
| if (load_hdr->num_apps > ACR_R352_MAX_APPS) { |
| nvkm_error(subdev, "more apps (%d) than supported (%d)!", |
| load_hdr->num_apps, ACR_R352_MAX_APPS); |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| memcpy(load_header, load_hdr, sizeof(*load_header) + |
| (sizeof(load_hdr->apps[0]) * 2 * load_hdr->num_apps)); |
| |
| /* Create ACR blob and copy HS data to it */ |
| ret = nvkm_gpuobj_new(subdev->device, ALIGN(hsbin_hdr->data_size, 256), |
| 0x1000, false, NULL, blob); |
| if (ret) |
| goto cleanup; |
| |
| nvkm_kmap(*blob); |
| nvkm_gpuobj_memcpy_to(*blob, 0, acr_data, hsbin_hdr->data_size); |
| nvkm_done(*blob); |
| |
| cleanup: |
| kfree(acr_image); |
| |
| return ret; |
| } |
| |
| /** |
| * acr_r352_load_blobs - load blobs common to all ACR V1 versions. |
| * |
| * This includes the LS blob, HS ucode loading blob, and HS bootloader. |
| * |
| * The HS ucode unload blob is only used on dGPU if the WPR region is variable. |
| */ |
| int |
| acr_r352_load_blobs(struct acr_r352 *acr, struct nvkm_secboot *sb) |
| { |
| struct nvkm_subdev *subdev = &sb->subdev; |
| int ret; |
| |
| /* Firmware already loaded? */ |
| if (acr->firmware_ok) |
| return 0; |
| |
| /* Load and prepare the managed falcon's firmwares */ |
| ret = acr_r352_prepare_ls_blob(acr, sb); |
| if (ret) |
| return ret; |
| |
| /* Load the HS firmware that will load the LS firmwares */ |
| if (!acr->load_blob) { |
| ret = acr_r352_prepare_hs_blob(acr, sb, "acr/ucode_load", |
| &acr->load_blob, |
| &acr->load_bl_header, true); |
| if (ret) |
| return ret; |
| } |
| |
| /* If the ACR region is dynamically programmed, we need an unload FW */ |
| if (sb->wpr_size == 0) { |
| ret = acr_r352_prepare_hs_blob(acr, sb, "acr/ucode_unload", |
| &acr->unload_blob, |
| &acr->unload_bl_header, false); |
| if (ret) |
| return ret; |
| } |
| |
| /* Load the HS firmware bootloader */ |
| if (!acr->hsbl_blob) { |
| acr->hsbl_blob = nvkm_acr_load_firmware(subdev, "acr/bl", 0); |
| if (IS_ERR(acr->hsbl_blob)) { |
| ret = PTR_ERR(acr->hsbl_blob); |
| acr->hsbl_blob = NULL; |
| return ret; |
| } |
| |
| if (acr->base.boot_falcon != NVKM_SECBOOT_FALCON_PMU) { |
| acr->hsbl_unload_blob = nvkm_acr_load_firmware(subdev, |
| "acr/unload_bl", 0); |
| if (IS_ERR(acr->hsbl_unload_blob)) { |
| ret = PTR_ERR(acr->hsbl_unload_blob); |
| acr->hsbl_unload_blob = NULL; |
| return ret; |
| } |
| } else { |
| acr->hsbl_unload_blob = acr->hsbl_blob; |
| } |
| } |
| |
| acr->firmware_ok = true; |
| nvkm_debug(&sb->subdev, "LS blob successfully created\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * acr_r352_load() - prepare HS falcon to run the specified blob, mapped. |
| * |
| * Returns the start address to use, or a negative error value. |
| */ |
| static int |
| acr_r352_load(struct nvkm_acr *_acr, struct nvkm_falcon *falcon, |
| struct nvkm_gpuobj *blob, u64 offset) |
| { |
| struct acr_r352 *acr = acr_r352(_acr); |
| const u32 bl_desc_size = acr->func->hs_bl_desc_size; |
| const struct hsf_load_header *load_hdr; |
| struct fw_bin_header *bl_hdr; |
| struct fw_bl_desc *hsbl_desc; |
| void *bl, *blob_data, *hsbl_code, *hsbl_data; |
| u32 code_size; |
| u8 *bl_desc; |
| |
| bl_desc = kzalloc(bl_desc_size, GFP_KERNEL); |
| if (!bl_desc) |
| return -ENOMEM; |
| |
| /* Find the bootloader descriptor for our blob and copy it */ |
| if (blob == acr->load_blob) { |
| load_hdr = &acr->load_bl_header; |
| bl = acr->hsbl_blob; |
| } else if (blob == acr->unload_blob) { |
| load_hdr = &acr->unload_bl_header; |
| bl = acr->hsbl_unload_blob; |
| } else { |
| nvkm_error(_acr->subdev, "invalid secure boot blob!\n"); |
| kfree(bl_desc); |
| return -EINVAL; |
| } |
| |
| bl_hdr = bl; |
| hsbl_desc = bl + bl_hdr->header_offset; |
| blob_data = bl + bl_hdr->data_offset; |
| hsbl_code = blob_data + hsbl_desc->code_off; |
| hsbl_data = blob_data + hsbl_desc->data_off; |
| code_size = ALIGN(hsbl_desc->code_size, 256); |
| |
| /* |
| * Copy HS bootloader data |
| */ |
| nvkm_falcon_load_dmem(falcon, hsbl_data, 0x0, hsbl_desc->data_size, 0); |
| |
| /* Copy HS bootloader code to end of IMEM */ |
| nvkm_falcon_load_imem(falcon, hsbl_code, falcon->code.limit - code_size, |
| code_size, hsbl_desc->start_tag, 0, false); |
| |
| /* Generate the BL header */ |
| acr->func->generate_hs_bl_desc(load_hdr, bl_desc, offset); |
| |
| /* |
| * Copy HS BL header where the HS descriptor expects it to be |
| */ |
| nvkm_falcon_load_dmem(falcon, bl_desc, hsbl_desc->dmem_load_off, |
| bl_desc_size, 0); |
| |
| kfree(bl_desc); |
| return hsbl_desc->start_tag << 8; |
| } |
| |
| static int |
| acr_r352_shutdown(struct acr_r352 *acr, struct nvkm_secboot *sb) |
| { |
| struct nvkm_subdev *subdev = &sb->subdev; |
| int i; |
| |
| /* Run the unload blob to unprotect the WPR region */ |
| if (acr->unload_blob && sb->wpr_set) { |
| int ret; |
| |
| nvkm_debug(subdev, "running HS unload blob\n"); |
| ret = sb->func->run_blob(sb, acr->unload_blob, sb->halt_falcon); |
| if (ret < 0) |
| return ret; |
| /* |
| * Unload blob will return this error code - it is not an error |
| * and the expected behavior on RM as well |
| */ |
| if (ret && ret != 0x1d) { |
| nvkm_error(subdev, "HS unload failed, ret 0x%08x\n", ret); |
| return -EINVAL; |
| } |
| nvkm_debug(subdev, "HS unload blob completed\n"); |
| } |
| |
| for (i = 0; i < NVKM_SECBOOT_FALCON_END; i++) |
| acr->falcon_state[i] = NON_SECURE; |
| |
| sb->wpr_set = false; |
| |
| return 0; |
| } |
| |
| /** |
| * Check if the WPR region has been indeed set by the ACR firmware, and |
| * matches where it should be. |
| */ |
| static bool |
| acr_r352_wpr_is_set(const struct acr_r352 *acr, const struct nvkm_secboot *sb) |
| { |
| const struct nvkm_subdev *subdev = &sb->subdev; |
| const struct nvkm_device *device = subdev->device; |
| u64 wpr_lo, wpr_hi; |
| u64 wpr_range_lo, wpr_range_hi; |
| |
| nvkm_wr32(device, 0x100cd4, 0x2); |
| wpr_lo = (nvkm_rd32(device, 0x100cd4) & ~0xff); |
| wpr_lo <<= 8; |
| nvkm_wr32(device, 0x100cd4, 0x3); |
| wpr_hi = (nvkm_rd32(device, 0x100cd4) & ~0xff); |
| wpr_hi <<= 8; |
| |
| if (sb->wpr_size != 0) { |
| wpr_range_lo = sb->wpr_addr; |
| wpr_range_hi = wpr_range_lo + sb->wpr_size; |
| } else { |
| wpr_range_lo = acr->ls_blob->addr; |
| wpr_range_hi = wpr_range_lo + acr->ls_blob->size; |
| } |
| |
| return (wpr_lo >= wpr_range_lo && wpr_lo < wpr_range_hi && |
| wpr_hi > wpr_range_lo && wpr_hi <= wpr_range_hi); |
| } |
| |
| static int |
| acr_r352_bootstrap(struct acr_r352 *acr, struct nvkm_secboot *sb) |
| { |
| const struct nvkm_subdev *subdev = &sb->subdev; |
| unsigned long managed_falcons = acr->base.managed_falcons; |
| int falcon_id; |
| int ret; |
| |
| if (sb->wpr_set) |
| return 0; |
| |
| /* Make sure all blobs are ready */ |
| ret = acr_r352_load_blobs(acr, sb); |
| if (ret) |
| return ret; |
| |
| nvkm_debug(subdev, "running HS load blob\n"); |
| ret = sb->func->run_blob(sb, acr->load_blob, sb->boot_falcon); |
| /* clear halt interrupt */ |
| nvkm_falcon_clear_interrupt(sb->boot_falcon, 0x10); |
| sb->wpr_set = acr_r352_wpr_is_set(acr, sb); |
| if (ret < 0) { |
| return ret; |
| } else if (ret > 0) { |
| nvkm_error(subdev, "HS load failed, ret 0x%08x\n", ret); |
| return -EINVAL; |
| } |
| nvkm_debug(subdev, "HS load blob completed\n"); |
| /* WPR must be set at this point */ |
| if (!sb->wpr_set) { |
| nvkm_error(subdev, "ACR blob completed but WPR not set!\n"); |
| return -EINVAL; |
| } |
| |
| /* Run LS firmwares post_run hooks */ |
| for_each_set_bit(falcon_id, &managed_falcons, NVKM_SECBOOT_FALCON_END) { |
| const struct acr_r352_ls_func *func = |
| acr->func->ls_func[falcon_id]; |
| |
| if (func->post_run) { |
| ret = func->post_run(&acr->base, sb); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * acr_r352_reset_nopmu - dummy reset method when no PMU firmware is loaded |
| * |
| * Reset is done by re-executing secure boot from scratch, with lazy bootstrap |
| * disabled. This has the effect of making all managed falcons ready-to-run. |
| */ |
| static int |
| acr_r352_reset_nopmu(struct acr_r352 *acr, struct nvkm_secboot *sb, |
| unsigned long falcon_mask) |
| { |
| int falcon; |
| int ret; |
| |
| /* |
| * Perform secure boot each time we are called on FECS. Since only FECS |
| * and GPCCS are managed and started together, this ought to be safe. |
| */ |
| if (!(falcon_mask & BIT(NVKM_SECBOOT_FALCON_FECS))) |
| goto end; |
| |
| ret = acr_r352_shutdown(acr, sb); |
| if (ret) |
| return ret; |
| |
| ret = acr_r352_bootstrap(acr, sb); |
| if (ret) |
| return ret; |
| |
| end: |
| for_each_set_bit(falcon, &falcon_mask, NVKM_SECBOOT_FALCON_END) { |
| acr->falcon_state[falcon] = RESET; |
| } |
| return 0; |
| } |
| |
| /* |
| * acr_r352_reset() - execute secure boot from the prepared state |
| * |
| * Load the HS bootloader and ask the falcon to run it. This will in turn |
| * load the HS firmware and run it, so once the falcon stops all the managed |
| * falcons should have their LS firmware loaded and be ready to run. |
| */ |
| static int |
| acr_r352_reset(struct nvkm_acr *_acr, struct nvkm_secboot *sb, |
| unsigned long falcon_mask) |
| { |
| struct acr_r352 *acr = acr_r352(_acr); |
| struct nvkm_msgqueue *queue; |
| int falcon; |
| bool wpr_already_set = sb->wpr_set; |
| int ret; |
| |
| /* Make sure secure boot is performed */ |
| ret = acr_r352_bootstrap(acr, sb); |
| if (ret) |
| return ret; |
| |
| /* No PMU interface? */ |
| if (!nvkm_secboot_is_managed(sb, _acr->boot_falcon)) { |
| /* Redo secure boot entirely if it was already done */ |
| if (wpr_already_set) |
| return acr_r352_reset_nopmu(acr, sb, falcon_mask); |
| /* Else return the result of the initial invokation */ |
| else |
| return ret; |
| } |
| |
| switch (_acr->boot_falcon) { |
| case NVKM_SECBOOT_FALCON_PMU: |
| queue = sb->subdev.device->pmu->queue; |
| break; |
| case NVKM_SECBOOT_FALCON_SEC2: |
| queue = sb->subdev.device->sec2->queue; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Otherwise just ask the LS firmware to reset the falcon */ |
| for_each_set_bit(falcon, &falcon_mask, NVKM_SECBOOT_FALCON_END) |
| nvkm_debug(&sb->subdev, "resetting %s falcon\n", |
| nvkm_secboot_falcon_name[falcon]); |
| ret = nvkm_msgqueue_acr_boot_falcons(queue, falcon_mask); |
| if (ret) { |
| nvkm_error(&sb->subdev, "error during falcon reset: %d\n", ret); |
| return ret; |
| } |
| nvkm_debug(&sb->subdev, "falcon reset done\n"); |
| |
| return 0; |
| } |
| |
| static int |
| acr_r352_fini(struct nvkm_acr *_acr, struct nvkm_secboot *sb, bool suspend) |
| { |
| struct acr_r352 *acr = acr_r352(_acr); |
| |
| return acr_r352_shutdown(acr, sb); |
| } |
| |
| static void |
| acr_r352_dtor(struct nvkm_acr *_acr) |
| { |
| struct acr_r352 *acr = acr_r352(_acr); |
| |
| nvkm_gpuobj_del(&acr->unload_blob); |
| |
| if (_acr->boot_falcon != NVKM_SECBOOT_FALCON_PMU) |
| kfree(acr->hsbl_unload_blob); |
| kfree(acr->hsbl_blob); |
| nvkm_gpuobj_del(&acr->load_blob); |
| nvkm_gpuobj_del(&acr->ls_blob); |
| |
| kfree(acr); |
| } |
| |
| static const struct acr_r352_lsf_func |
| acr_r352_ls_fecs_func_0 = { |
| .generate_bl_desc = acr_r352_generate_flcn_bl_desc, |
| .bl_desc_size = sizeof(struct acr_r352_flcn_bl_desc), |
| }; |
| |
| const struct acr_r352_ls_func |
| acr_r352_ls_fecs_func = { |
| .load = acr_ls_ucode_load_fecs, |
| .version_max = 0, |
| .version = { |
| &acr_r352_ls_fecs_func_0, |
| } |
| }; |
| |
| static const struct acr_r352_lsf_func |
| acr_r352_ls_gpccs_func_0 = { |
| .generate_bl_desc = acr_r352_generate_flcn_bl_desc, |
| .bl_desc_size = sizeof(struct acr_r352_flcn_bl_desc), |
| /* GPCCS will be loaded using PRI */ |
| .lhdr_flags = LSF_FLAG_FORCE_PRIV_LOAD, |
| }; |
| |
| const struct acr_r352_ls_func |
| acr_r352_ls_gpccs_func = { |
| .load = acr_ls_ucode_load_gpccs, |
| .version_max = 0, |
| .version = { |
| &acr_r352_ls_gpccs_func_0, |
| } |
| }; |
| |
| |
| |
| /** |
| * struct acr_r352_pmu_bl_desc - PMU DMEM bootloader descriptor |
| * @dma_idx: DMA context to be used by BL while loading code/data |
| * @code_dma_base: 256B-aligned Physical FB Address where code is located |
| * @total_code_size: total size of the code part in the ucode |
| * @code_size_to_load: size of the code part to load in PMU IMEM. |
| * @code_entry_point: entry point in the code. |
| * @data_dma_base: Physical FB address where data part of ucode is located |
| * @data_size: Total size of the data portion. |
| * @overlay_dma_base: Physical Fb address for resident code present in ucode |
| * @argc: Total number of args |
| * @argv: offset where args are copied into PMU's DMEM. |
| * |
| * Structure used by the PMU bootloader to load the rest of the code |
| */ |
| struct acr_r352_pmu_bl_desc { |
| u32 dma_idx; |
| u32 code_dma_base; |
| u32 code_size_total; |
| u32 code_size_to_load; |
| u32 code_entry_point; |
| u32 data_dma_base; |
| u32 data_size; |
| u32 overlay_dma_base; |
| u32 argc; |
| u32 argv; |
| u16 code_dma_base1; |
| u16 data_dma_base1; |
| u16 overlay_dma_base1; |
| }; |
| |
| /** |
| * acr_r352_generate_pmu_bl_desc() - populate a DMEM BL descriptor for PMU LS image |
| * |
| */ |
| static void |
| acr_r352_generate_pmu_bl_desc(const struct nvkm_acr *acr, |
| const struct ls_ucode_img *img, u64 wpr_addr, |
| void *_desc) |
| { |
| const struct ls_ucode_img_desc *pdesc = &img->ucode_desc; |
| const struct nvkm_pmu *pmu = acr->subdev->device->pmu; |
| struct acr_r352_pmu_bl_desc *desc = _desc; |
| u64 base; |
| u64 addr_code; |
| u64 addr_data; |
| u32 addr_args; |
| |
| base = wpr_addr + img->ucode_off + pdesc->app_start_offset; |
| addr_code = (base + pdesc->app_resident_code_offset) >> 8; |
| addr_data = (base + pdesc->app_resident_data_offset) >> 8; |
| addr_args = pmu->falcon->data.limit; |
| addr_args -= NVKM_MSGQUEUE_CMDLINE_SIZE; |
| |
| desc->dma_idx = FALCON_DMAIDX_UCODE; |
| desc->code_dma_base = lower_32_bits(addr_code); |
| desc->code_dma_base1 = upper_32_bits(addr_code); |
| desc->code_size_total = pdesc->app_size; |
| desc->code_size_to_load = pdesc->app_resident_code_size; |
| desc->code_entry_point = pdesc->app_imem_entry; |
| desc->data_dma_base = lower_32_bits(addr_data); |
| desc->data_dma_base1 = upper_32_bits(addr_data); |
| desc->data_size = pdesc->app_resident_data_size; |
| desc->overlay_dma_base = lower_32_bits(addr_code); |
| desc->overlay_dma_base1 = upper_32_bits(addr_code); |
| desc->argc = 1; |
| desc->argv = addr_args; |
| } |
| |
| static const struct acr_r352_lsf_func |
| acr_r352_ls_pmu_func_0 = { |
| .generate_bl_desc = acr_r352_generate_pmu_bl_desc, |
| .bl_desc_size = sizeof(struct acr_r352_pmu_bl_desc), |
| }; |
| |
| static const struct acr_r352_ls_func |
| acr_r352_ls_pmu_func = { |
| .load = acr_ls_ucode_load_pmu, |
| .post_run = acr_ls_pmu_post_run, |
| .version_max = 0, |
| .version = { |
| &acr_r352_ls_pmu_func_0, |
| } |
| }; |
| |
| const struct acr_r352_func |
| acr_r352_func = { |
| .fixup_hs_desc = acr_r352_fixup_hs_desc, |
| .generate_hs_bl_desc = acr_r352_generate_hs_bl_desc, |
| .hs_bl_desc_size = sizeof(struct acr_r352_flcn_bl_desc), |
| .ls_ucode_img_load = acr_r352_ls_ucode_img_load, |
| .ls_fill_headers = acr_r352_ls_fill_headers, |
| .ls_write_wpr = acr_r352_ls_write_wpr, |
| .ls_func = { |
| [NVKM_SECBOOT_FALCON_FECS] = &acr_r352_ls_fecs_func, |
| [NVKM_SECBOOT_FALCON_GPCCS] = &acr_r352_ls_gpccs_func, |
| [NVKM_SECBOOT_FALCON_PMU] = &acr_r352_ls_pmu_func, |
| }, |
| }; |
| |
| static const struct nvkm_acr_func |
| acr_r352_base_func = { |
| .dtor = acr_r352_dtor, |
| .fini = acr_r352_fini, |
| .load = acr_r352_load, |
| .reset = acr_r352_reset, |
| }; |
| |
| struct nvkm_acr * |
| acr_r352_new_(const struct acr_r352_func *func, |
| enum nvkm_secboot_falcon boot_falcon, |
| unsigned long managed_falcons) |
| { |
| struct acr_r352 *acr; |
| int i; |
| |
| /* Check that all requested falcons are supported */ |
| for_each_set_bit(i, &managed_falcons, NVKM_SECBOOT_FALCON_END) { |
| if (!func->ls_func[i]) |
| return ERR_PTR(-ENOTSUPP); |
| } |
| |
| acr = kzalloc(sizeof(*acr), GFP_KERNEL); |
| if (!acr) |
| return ERR_PTR(-ENOMEM); |
| |
| acr->base.boot_falcon = boot_falcon; |
| acr->base.managed_falcons = managed_falcons; |
| acr->base.func = &acr_r352_base_func; |
| acr->func = func; |
| |
| return &acr->base; |
| } |
| |
| struct nvkm_acr * |
| acr_r352_new(unsigned long managed_falcons) |
| { |
| return acr_r352_new_(&acr_r352_func, NVKM_SECBOOT_FALCON_PMU, |
| managed_falcons); |
| } |