| # | |
| # USB Storage driver configuration | |
| # | |
| comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" | |
| comment "also be needed; see USB_STORAGE Help for more info" | |
| depends on USB | |
| config USB_STORAGE | |
| tristate "USB Mass Storage support" | |
| depends on USB && SCSI | |
| ---help--- | |
| Say Y here if you want to connect USB mass storage devices to your | |
| computer's USB port. This is the driver you need for USB | |
| floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, | |
| USB flash devices, and memory sticks, along with | |
| similar devices. This driver may also be used for some cameras | |
| and card readers. | |
| This option depends on 'SCSI' support being enabled, but you | |
| probably also need 'SCSI device support: SCSI disk support' | |
| (BLK_DEV_SD) for most USB storage devices. | |
| To compile this driver as a module, choose M here: the | |
| module will be called usb-storage. | |
| config USB_STORAGE_DEBUG | |
| bool "USB Mass Storage verbose debug" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here in order to have the USB Mass Storage code generate | |
| verbose debugging messages. | |
| config USB_STORAGE_DATAFAB | |
| tristate "Datafab Compact Flash Reader support" | |
| depends on USB_STORAGE | |
| help | |
| Support for certain Datafab CompactFlash readers. | |
| Datafab has a web page at <http://www.datafabusa.com/>. | |
| If this driver is compiled as a module, it will be named ums-datafab. | |
| config USB_STORAGE_FREECOM | |
| tristate "Freecom USB/ATAPI Bridge support" | |
| depends on USB_STORAGE | |
| help | |
| Support for the Freecom USB to IDE/ATAPI adaptor. | |
| Freecom has a web page at <http://www.freecom.de/>. | |
| If this driver is compiled as a module, it will be named ums-freecom. | |
| config USB_STORAGE_ISD200 | |
| tristate "ISD-200 USB/ATA Bridge support" | |
| depends on USB_STORAGE | |
| ---help--- | |
| Say Y here if you want to use USB Mass Store devices based | |
| on the In-Systems Design ISD-200 USB/ATA bridge. | |
| Some of the products that use this chip are: | |
| - Archos Jukebox 6000 | |
| - ISD SmartCable for Storage | |
| - Taiwan Skymaster CD530U/DEL-0241 IDE bridge | |
| - Sony CRX10U CD-R/RW drive | |
| - CyQ've CQ8060A CDRW drive | |
| - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) | |
| If this driver is compiled as a module, it will be named ums-isd200. | |
| config USB_STORAGE_USBAT | |
| tristate "USBAT/USBAT02-based storage support" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here to include additional code to support storage devices | |
| based on the SCM/Shuttle USBAT/USBAT02 processors. | |
| Devices reported to work with this driver include: | |
| - CompactFlash reader included with Kodak DC3800 camera | |
| - Dane-Elec Zmate CompactFlash reader | |
| - Delkin Efilm reader2 | |
| - HP 8200e/8210e/8230e CD-Writer Plus drives | |
| - I-JAM JS-50U | |
| - Jessops CompactFlash JESDCFRU BLACK | |
| - Kingston Technology PCREAD-USB/CF | |
| - Maxell UA4 CompactFlash reader | |
| - Memorex UCF-100 | |
| - Microtech ZiO! ICS-45 CF2 | |
| - RCA LYRA MP3 portable | |
| - Sandisk ImageMate SDDR-05b | |
| If this driver is compiled as a module, it will be named ums-usbat. | |
| config USB_STORAGE_SDDR09 | |
| tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here to include additional code to support the Sandisk SDDR-09 | |
| SmartMedia reader in the USB Mass Storage driver. | |
| Also works for the Microtech Zio! CompactFlash/SmartMedia reader. | |
| If this driver is compiled as a module, it will be named ums-sddr09. | |
| config USB_STORAGE_SDDR55 | |
| tristate "SanDisk SDDR-55 SmartMedia support" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here to include additional code to support the Sandisk SDDR-55 | |
| SmartMedia reader in the USB Mass Storage driver. | |
| If this driver is compiled as a module, it will be named ums-sddr55. | |
| config USB_STORAGE_JUMPSHOT | |
| tristate "Lexar Jumpshot Compact Flash Reader" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here to include additional code to support the Lexar Jumpshot | |
| USB CompactFlash reader. | |
| If this driver is compiled as a module, it will be named ums-jumpshot. | |
| config USB_STORAGE_ALAUDA | |
| tristate "Olympus MAUSB-10/Fuji DPC-R1 support" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here to include additional code to support the Olympus MAUSB-10 | |
| and Fujifilm DPC-R1 USB Card reader/writer devices. | |
| These devices are based on the Alauda chip and support both | |
| XD and SmartMedia cards. | |
| If this driver is compiled as a module, it will be named ums-alauda. | |
| config USB_STORAGE_ONETOUCH | |
| tristate "Support OneTouch Button on Maxtor Hard Drives" | |
| depends on USB_STORAGE | |
| depends on INPUT=y || INPUT=USB_STORAGE | |
| help | |
| Say Y here to include additional code to support the Maxtor OneTouch | |
| USB hard drive's onetouch button. | |
| This code registers the button on the front of Maxtor OneTouch USB | |
| hard drive's as an input device. An action can be associated with | |
| this input in any keybinding software. (e.g. gnome's keyboard short- | |
| cuts) | |
| If this driver is compiled as a module, it will be named ums-onetouch. | |
| config USB_STORAGE_KARMA | |
| tristate "Support for Rio Karma music player" | |
| depends on USB_STORAGE | |
| help | |
| Say Y here to include additional code to support the Rio Karma | |
| USB interface. | |
| This code places the Rio Karma into mass storage mode, enabling | |
| it to be mounted as an ordinary filesystem. Performing an eject | |
| on the resulting scsi device node returns the Karma to normal | |
| operation. | |
| If this driver is compiled as a module, it will be named ums-karma. | |
| config USB_STORAGE_CYPRESS_ATACB | |
| tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" | |
| depends on USB_STORAGE | |
| ---help--- | |
| Say Y here if you want to use SAT (ata pass through) on devices based | |
| on the Cypress USB/ATA bridge supporting ATACB. This will allow you | |
| to use tools to tune and monitor your drive (like hdparm or smartctl). | |
| If you say no here your device will still work with the standard usb | |
| mass storage class. | |
| If this driver is compiled as a module, it will be named ums-cypress. | |
| config USB_LIBUSUAL | |
| bool "The shared table of common (or usual) storage devices" | |
| depends on USB | |
| help | |
| This module contains a table of common (or usual) devices | |
| for usb-storage and ub drivers, and allows to switch binding | |
| of these devices without rebuilding modules. | |
| Typical syntax of /etc/modprobe.conf is: | |
| options libusual bias="ub" | |
| If unsure, say N. |