| /* | |
| * Atheros AR9170 driver | |
| * | |
| * USB - frontend | |
| * | |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2009, Christian Lamparter <chunkeey@web.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, see | |
| * http://www.gnu.org/licenses/. | |
| * | |
| * This file incorporates work covered by the following copyright and | |
| * permission notice: | |
| * Copyright (c) 2007-2008 Atheros Communications, Inc. | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/usb.h> | |
| #include <linux/firmware.h> | |
| #include <linux/etherdevice.h> | |
| #include <net/mac80211.h> | |
| #include "ar9170.h" | |
| #include "cmd.h" | |
| #include "hw.h" | |
| #include "usb.h" | |
| MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); | |
| MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); | |
| MODULE_FIRMWARE("ar9170-1.fw"); | |
| MODULE_FIRMWARE("ar9170-2.fw"); | |
| static struct usb_device_id ar9170_usb_ids[] = { | |
| /* Atheros 9170 */ | |
| { USB_DEVICE(0x0cf3, 0x9170) }, | |
| /* Atheros TG121N */ | |
| { USB_DEVICE(0x0cf3, 0x1001) }, | |
| /* Cace Airpcap NX */ | |
| { USB_DEVICE(0xcace, 0x0300) }, | |
| /* D-Link DWA 160A */ | |
| { USB_DEVICE(0x07d1, 0x3c10) }, | |
| /* Netgear WNDA3100 */ | |
| { USB_DEVICE(0x0846, 0x9010) }, | |
| /* Netgear WN111 v2 */ | |
| { USB_DEVICE(0x0846, 0x9001) }, | |
| /* Zydas ZD1221 */ | |
| { USB_DEVICE(0x0ace, 0x1221) }, | |
| /* ZyXEL NWD271N */ | |
| { USB_DEVICE(0x0586, 0x3417) }, | |
| /* Z-Com UB81 BG */ | |
| { USB_DEVICE(0x0cde, 0x0023) }, | |
| /* Z-Com UB82 ABG */ | |
| { USB_DEVICE(0x0cde, 0x0026) }, | |
| /* Arcadyan WN7512 */ | |
| { USB_DEVICE(0x083a, 0xf522) }, | |
| /* Planex GWUS300 */ | |
| { USB_DEVICE(0x2019, 0x5304) }, | |
| /* IO-Data WNGDNUS2 */ | |
| { USB_DEVICE(0x04bb, 0x093f) }, | |
| /* terminate */ | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(usb, ar9170_usb_ids); | |
| static void ar9170_usb_tx_urb_complete_free(struct urb *urb) | |
| { | |
| struct sk_buff *skb = urb->context; | |
| struct ar9170_usb *aru = (struct ar9170_usb *) | |
| usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); | |
| if (!aru) { | |
| dev_kfree_skb_irq(skb); | |
| return ; | |
| } | |
| ar9170_handle_tx_status(&aru->common, skb, false, | |
| AR9170_TX_STATUS_COMPLETE); | |
| } | |
| static void ar9170_usb_tx_urb_complete(struct urb *urb) | |
| { | |
| } | |
| static void ar9170_usb_irq_completed(struct urb *urb) | |
| { | |
| struct ar9170_usb *aru = urb->context; | |
| switch (urb->status) { | |
| /* everything is fine */ | |
| case 0: | |
| break; | |
| /* disconnect */ | |
| case -ENOENT: | |
| case -ECONNRESET: | |
| case -ENODEV: | |
| case -ESHUTDOWN: | |
| goto free; | |
| default: | |
| goto resubmit; | |
| } | |
| print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET, | |
| urb->transfer_buffer, urb->actual_length); | |
| resubmit: | |
| usb_anchor_urb(urb, &aru->rx_submitted); | |
| if (usb_submit_urb(urb, GFP_ATOMIC)) { | |
| usb_unanchor_urb(urb); | |
| goto free; | |
| } | |
| return; | |
| free: | |
| usb_buffer_free(aru->udev, 64, urb->transfer_buffer, urb->transfer_dma); | |
| } | |
| static void ar9170_usb_rx_completed(struct urb *urb) | |
| { | |
| struct sk_buff *skb = urb->context; | |
| struct ar9170_usb *aru = (struct ar9170_usb *) | |
| usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); | |
| int err; | |
| if (!aru) | |
| goto free; | |
| switch (urb->status) { | |
| /* everything is fine */ | |
| case 0: | |
| break; | |
| /* disconnect */ | |
| case -ENOENT: | |
| case -ECONNRESET: | |
| case -ENODEV: | |
| case -ESHUTDOWN: | |
| goto free; | |
| default: | |
| goto resubmit; | |
| } | |
| skb_put(skb, urb->actual_length); | |
| ar9170_rx(&aru->common, skb); | |
| resubmit: | |
| skb_reset_tail_pointer(skb); | |
| skb_trim(skb, 0); | |
| usb_anchor_urb(urb, &aru->rx_submitted); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| usb_unanchor_urb(urb); | |
| dev_kfree_skb_irq(skb); | |
| } | |
| return ; | |
| free: | |
| dev_kfree_skb_irq(skb); | |
| return; | |
| } | |
| static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru, | |
| struct urb *urb, gfp_t gfp) | |
| { | |
| struct sk_buff *skb; | |
| skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE + 32, gfp); | |
| if (!skb) | |
| return -ENOMEM; | |
| /* reserve some space for mac80211's radiotap */ | |
| skb_reserve(skb, 32); | |
| usb_fill_bulk_urb(urb, aru->udev, | |
| usb_rcvbulkpipe(aru->udev, AR9170_EP_RX), | |
| skb->data, min(skb_tailroom(skb), | |
| AR9170_MAX_RX_BUFFER_SIZE), | |
| ar9170_usb_rx_completed, skb); | |
| return 0; | |
| } | |
| static int ar9170_usb_alloc_rx_irq_urb(struct ar9170_usb *aru) | |
| { | |
| struct urb *urb = NULL; | |
| void *ibuf; | |
| int err = -ENOMEM; | |
| /* initialize interrupt endpoint */ | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) | |
| goto out; | |
| ibuf = usb_buffer_alloc(aru->udev, 64, GFP_KERNEL, &urb->transfer_dma); | |
| if (!ibuf) | |
| goto out; | |
| usb_fill_int_urb(urb, aru->udev, | |
| usb_rcvintpipe(aru->udev, AR9170_EP_IRQ), ibuf, | |
| 64, ar9170_usb_irq_completed, aru, 1); | |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| usb_anchor_urb(urb, &aru->rx_submitted); | |
| err = usb_submit_urb(urb, GFP_KERNEL); | |
| if (err) { | |
| usb_unanchor_urb(urb); | |
| usb_buffer_free(aru->udev, 64, urb->transfer_buffer, | |
| urb->transfer_dma); | |
| } | |
| out: | |
| usb_free_urb(urb); | |
| return err; | |
| } | |
| static int ar9170_usb_alloc_rx_bulk_urbs(struct ar9170_usb *aru) | |
| { | |
| struct urb *urb; | |
| int i; | |
| int err = -EINVAL; | |
| for (i = 0; i < AR9170_NUM_RX_URBS; i++) { | |
| err = -ENOMEM; | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) | |
| goto err_out; | |
| err = ar9170_usb_prep_rx_urb(aru, urb, GFP_KERNEL); | |
| if (err) { | |
| usb_free_urb(urb); | |
| goto err_out; | |
| } | |
| usb_anchor_urb(urb, &aru->rx_submitted); | |
| err = usb_submit_urb(urb, GFP_KERNEL); | |
| if (err) { | |
| usb_unanchor_urb(urb); | |
| dev_kfree_skb_any((void *) urb->transfer_buffer); | |
| usb_free_urb(urb); | |
| goto err_out; | |
| } | |
| usb_free_urb(urb); | |
| } | |
| /* the device now waiting for a firmware. */ | |
| aru->common.state = AR9170_IDLE; | |
| return 0; | |
| err_out: | |
| usb_kill_anchored_urbs(&aru->rx_submitted); | |
| return err; | |
| } | |
| static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru) | |
| { | |
| int ret; | |
| aru->common.state = AR9170_UNKNOWN_STATE; | |
| usb_unlink_anchored_urbs(&aru->tx_submitted); | |
| /* give the LED OFF command and the deauth frame a chance to air. */ | |
| ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted, | |
| msecs_to_jiffies(100)); | |
| if (ret == 0) | |
| dev_err(&aru->udev->dev, "kill pending tx urbs.\n"); | |
| usb_poison_anchored_urbs(&aru->tx_submitted); | |
| usb_poison_anchored_urbs(&aru->rx_submitted); | |
| } | |
| static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd, | |
| unsigned int plen, void *payload, | |
| unsigned int outlen, void *out) | |
| { | |
| struct ar9170_usb *aru = (void *) ar; | |
| struct urb *urb = NULL; | |
| unsigned long flags; | |
| int err = -ENOMEM; | |
| if (unlikely(!IS_ACCEPTING_CMD(ar))) | |
| return -EPERM; | |
| if (WARN_ON(plen > AR9170_MAX_CMD_LEN - 4)) | |
| return -EINVAL; | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (unlikely(!urb)) | |
| goto err_free; | |
| ar->cmdbuf[0] = cpu_to_le32(plen); | |
| ar->cmdbuf[0] |= cpu_to_le32(cmd << 8); | |
| /* writing multiple regs fills this buffer already */ | |
| if (plen && payload != (u8 *)(&ar->cmdbuf[1])) | |
| memcpy(&ar->cmdbuf[1], payload, plen); | |
| spin_lock_irqsave(&aru->common.cmdlock, flags); | |
| aru->readbuf = (u8 *)out; | |
| aru->readlen = outlen; | |
| spin_unlock_irqrestore(&aru->common.cmdlock, flags); | |
| usb_fill_int_urb(urb, aru->udev, | |
| usb_sndbulkpipe(aru->udev, AR9170_EP_CMD), | |
| aru->common.cmdbuf, plen + 4, | |
| ar9170_usb_tx_urb_complete, NULL, 1); | |
| usb_anchor_urb(urb, &aru->tx_submitted); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| usb_unanchor_urb(urb); | |
| usb_free_urb(urb); | |
| goto err_unbuf; | |
| } | |
| usb_free_urb(urb); | |
| err = wait_for_completion_timeout(&aru->cmd_wait, HZ); | |
| if (err == 0) { | |
| err = -ETIMEDOUT; | |
| goto err_unbuf; | |
| } | |
| if (outlen >= 0 && aru->readlen != outlen) { | |
| err = -EMSGSIZE; | |
| goto err_unbuf; | |
| } | |
| return 0; | |
| err_unbuf: | |
| /* Maybe the device was removed in the second we were waiting? */ | |
| if (IS_STARTED(ar)) { | |
| dev_err(&aru->udev->dev, "no command feedback " | |
| "received (%d).\n", err); | |
| /* provide some maybe useful debug information */ | |
| print_hex_dump_bytes("ar9170 cmd: ", DUMP_PREFIX_NONE, | |
| aru->common.cmdbuf, plen + 4); | |
| dump_stack(); | |
| } | |
| /* invalidate to avoid completing the next prematurely */ | |
| spin_lock_irqsave(&aru->common.cmdlock, flags); | |
| aru->readbuf = NULL; | |
| aru->readlen = 0; | |
| spin_unlock_irqrestore(&aru->common.cmdlock, flags); | |
| err_free: | |
| return err; | |
| } | |
| static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb, | |
| bool txstatus_needed, unsigned int extra_len) | |
| { | |
| struct ar9170_usb *aru = (struct ar9170_usb *) ar; | |
| struct urb *urb; | |
| int err; | |
| if (unlikely(!IS_STARTED(ar))) { | |
| /* Seriously, what were you drink... err... thinking!? */ | |
| return -EPERM; | |
| } | |
| urb = usb_alloc_urb(0, GFP_ATOMIC); | |
| if (unlikely(!urb)) | |
| return -ENOMEM; | |
| usb_fill_bulk_urb(urb, aru->udev, | |
| usb_sndbulkpipe(aru->udev, AR9170_EP_TX), | |
| skb->data, skb->len + extra_len, (txstatus_needed ? | |
| ar9170_usb_tx_urb_complete : | |
| ar9170_usb_tx_urb_complete_free), skb); | |
| urb->transfer_flags |= URB_ZERO_PACKET; | |
| usb_anchor_urb(urb, &aru->tx_submitted); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (unlikely(err)) | |
| usb_unanchor_urb(urb); | |
| usb_free_urb(urb); | |
| return err; | |
| } | |
| static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer) | |
| { | |
| struct ar9170_usb *aru = (void *) ar; | |
| unsigned long flags; | |
| u32 in, out; | |
| if (!buffer) | |
| return ; | |
| in = le32_to_cpup((__le32 *)buffer); | |
| out = le32_to_cpu(ar->cmdbuf[0]); | |
| /* mask off length byte */ | |
| out &= ~0xFF; | |
| if (aru->readlen >= 0) { | |
| /* add expected length */ | |
| out |= aru->readlen; | |
| } else { | |
| /* add obtained length */ | |
| out |= in & 0xFF; | |
| } | |
| /* | |
| * Some commands (e.g: AR9170_CMD_FREQUENCY) have a variable response | |
| * length and we cannot predict the correct length in advance. | |
| * So we only check if we provided enough space for the data. | |
| */ | |
| if (unlikely(out < in)) { | |
| dev_warn(&aru->udev->dev, "received invalid command response " | |
| "got %d bytes, instead of %d bytes " | |
| "and the resp length is %d bytes\n", | |
| in, out, len); | |
| print_hex_dump_bytes("ar9170 invalid resp: ", | |
| DUMP_PREFIX_OFFSET, buffer, len); | |
| /* | |
| * Do not complete, then the command times out, | |
| * and we get a stack trace from there. | |
| */ | |
| return ; | |
| } | |
| spin_lock_irqsave(&aru->common.cmdlock, flags); | |
| if (aru->readbuf && len > 0) { | |
| memcpy(aru->readbuf, buffer + 4, len - 4); | |
| aru->readbuf = NULL; | |
| } | |
| complete(&aru->cmd_wait); | |
| spin_unlock_irqrestore(&aru->common.cmdlock, flags); | |
| } | |
| static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data, | |
| size_t len, u32 addr, bool complete) | |
| { | |
| int transfer, err; | |
| u8 *buf = kmalloc(4096, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| while (len) { | |
| transfer = min_t(int, len, 4096); | |
| memcpy(buf, data, transfer); | |
| err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0), | |
| 0x30 /* FW DL */, 0x40 | USB_DIR_OUT, | |
| addr >> 8, 0, buf, transfer, 1000); | |
| if (err < 0) { | |
| kfree(buf); | |
| return err; | |
| } | |
| len -= transfer; | |
| data += transfer; | |
| addr += transfer; | |
| } | |
| kfree(buf); | |
| if (complete) { | |
| err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0), | |
| 0x31 /* FW DL COMPLETE */, | |
| 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 5000); | |
| } | |
| return 0; | |
| } | |
| static int ar9170_usb_request_firmware(struct ar9170_usb *aru) | |
| { | |
| int err = 0; | |
| err = request_firmware(&aru->init_values, "ar9170-1.fw", | |
| &aru->udev->dev); | |
| if (err) { | |
| dev_err(&aru->udev->dev, "file with init values not found.\n"); | |
| return err; | |
| } | |
| err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev); | |
| if (err) { | |
| release_firmware(aru->init_values); | |
| dev_err(&aru->udev->dev, "firmware file not found.\n"); | |
| return err; | |
| } | |
| return err; | |
| } | |
| static int ar9170_usb_reset(struct ar9170_usb *aru) | |
| { | |
| int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING); | |
| if (lock) { | |
| ret = usb_lock_device_for_reset(aru->udev, aru->intf); | |
| if (ret < 0) { | |
| dev_err(&aru->udev->dev, "unable to lock device " | |
| "for reset (%d).\n", ret); | |
| return ret; | |
| } | |
| } | |
| ret = usb_reset_device(aru->udev); | |
| if (lock) | |
| usb_unlock_device(aru->udev); | |
| /* let it rest - for a second - */ | |
| msleep(1000); | |
| return ret; | |
| } | |
| static int ar9170_usb_upload_firmware(struct ar9170_usb *aru) | |
| { | |
| int err; | |
| /* First, upload initial values to device RAM */ | |
| err = ar9170_usb_upload(aru, aru->init_values->data, | |
| aru->init_values->size, 0x102800, false); | |
| if (err) { | |
| dev_err(&aru->udev->dev, "firmware part 1 " | |
| "upload failed (%d).\n", err); | |
| return err; | |
| } | |
| /* Then, upload the firmware itself and start it */ | |
| return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size, | |
| 0x200000, true); | |
| } | |
| static int ar9170_usb_init_transport(struct ar9170_usb *aru) | |
| { | |
| struct ar9170 *ar = (void *) &aru->common; | |
| int err; | |
| ar9170_regwrite_begin(ar); | |
| /* Set USB Rx stream mode MAX packet number to 2 */ | |
| ar9170_regwrite(AR9170_USB_REG_MAX_AGG_UPLOAD, 0x4); | |
| /* Set USB Rx stream mode timeout to 10us */ | |
| ar9170_regwrite(AR9170_USB_REG_UPLOAD_TIME_CTL, 0x80); | |
| ar9170_regwrite_finish(); | |
| err = ar9170_regwrite_result(); | |
| if (err) | |
| dev_err(&aru->udev->dev, "USB setup failed (%d).\n", err); | |
| return err; | |
| } | |
| static void ar9170_usb_stop(struct ar9170 *ar) | |
| { | |
| struct ar9170_usb *aru = (void *) ar; | |
| int ret; | |
| if (IS_ACCEPTING_CMD(ar)) | |
| aru->common.state = AR9170_STOPPED; | |
| /* lets wait a while until the tx - queues are dried out */ | |
| ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted, | |
| msecs_to_jiffies(1000)); | |
| if (ret == 0) | |
| dev_err(&aru->udev->dev, "kill pending tx urbs.\n"); | |
| usb_poison_anchored_urbs(&aru->tx_submitted); | |
| /* | |
| * Note: | |
| * So far we freed all tx urbs, but we won't dare to touch any rx urbs. | |
| * Else we would end up with a unresponsive device... | |
| */ | |
| } | |
| static int ar9170_usb_open(struct ar9170 *ar) | |
| { | |
| struct ar9170_usb *aru = (void *) ar; | |
| int err; | |
| usb_unpoison_anchored_urbs(&aru->tx_submitted); | |
| err = ar9170_usb_init_transport(aru); | |
| if (err) { | |
| usb_poison_anchored_urbs(&aru->tx_submitted); | |
| return err; | |
| } | |
| aru->common.state = AR9170_IDLE; | |
| return 0; | |
| } | |
| static int ar9170_usb_init_device(struct ar9170_usb *aru) | |
| { | |
| int err; | |
| err = ar9170_usb_alloc_rx_irq_urb(aru); | |
| if (err) | |
| goto err_out; | |
| err = ar9170_usb_alloc_rx_bulk_urbs(aru); | |
| if (err) | |
| goto err_unrx; | |
| err = ar9170_usb_upload_firmware(aru); | |
| if (err) { | |
| err = ar9170_echo_test(&aru->common, 0x60d43110); | |
| if (err) { | |
| /* force user invention, by disabling the device */ | |
| err = usb_driver_set_configuration(aru->udev, -1); | |
| dev_err(&aru->udev->dev, "device is in a bad state. " | |
| "please reconnect it!\n"); | |
| goto err_unrx; | |
| } | |
| } | |
| return 0; | |
| err_unrx: | |
| ar9170_usb_cancel_urbs(aru); | |
| err_out: | |
| return err; | |
| } | |
| static int ar9170_usb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct ar9170_usb *aru; | |
| struct ar9170 *ar; | |
| struct usb_device *udev; | |
| int err; | |
| aru = ar9170_alloc(sizeof(*aru)); | |
| if (IS_ERR(aru)) { | |
| err = PTR_ERR(aru); | |
| goto out; | |
| } | |
| udev = interface_to_usbdev(intf); | |
| usb_get_dev(udev); | |
| aru->udev = udev; | |
| aru->intf = intf; | |
| ar = &aru->common; | |
| usb_set_intfdata(intf, aru); | |
| SET_IEEE80211_DEV(ar->hw, &udev->dev); | |
| init_usb_anchor(&aru->rx_submitted); | |
| init_usb_anchor(&aru->tx_submitted); | |
| init_completion(&aru->cmd_wait); | |
| aru->common.stop = ar9170_usb_stop; | |
| aru->common.open = ar9170_usb_open; | |
| aru->common.tx = ar9170_usb_tx; | |
| aru->common.exec_cmd = ar9170_usb_exec_cmd; | |
| aru->common.callback_cmd = ar9170_usb_callback_cmd; | |
| err = ar9170_usb_reset(aru); | |
| if (err) | |
| goto err_freehw; | |
| err = ar9170_usb_request_firmware(aru); | |
| if (err) | |
| goto err_freehw; | |
| err = ar9170_usb_init_device(aru); | |
| if (err) | |
| goto err_freefw; | |
| err = ar9170_usb_open(ar); | |
| if (err) | |
| goto err_unrx; | |
| err = ar9170_register(ar, &udev->dev); | |
| ar9170_usb_stop(ar); | |
| if (err) | |
| goto err_unrx; | |
| return 0; | |
| err_unrx: | |
| ar9170_usb_cancel_urbs(aru); | |
| err_freefw: | |
| release_firmware(aru->init_values); | |
| release_firmware(aru->firmware); | |
| err_freehw: | |
| usb_set_intfdata(intf, NULL); | |
| usb_put_dev(udev); | |
| ieee80211_free_hw(ar->hw); | |
| out: | |
| return err; | |
| } | |
| static void ar9170_usb_disconnect(struct usb_interface *intf) | |
| { | |
| struct ar9170_usb *aru = usb_get_intfdata(intf); | |
| if (!aru) | |
| return; | |
| aru->common.state = AR9170_IDLE; | |
| ar9170_unregister(&aru->common); | |
| ar9170_usb_cancel_urbs(aru); | |
| release_firmware(aru->init_values); | |
| release_firmware(aru->firmware); | |
| usb_put_dev(aru->udev); | |
| usb_set_intfdata(intf, NULL); | |
| ieee80211_free_hw(aru->common.hw); | |
| } | |
| #ifdef CONFIG_PM | |
| static int ar9170_suspend(struct usb_interface *intf, | |
| pm_message_t message) | |
| { | |
| struct ar9170_usb *aru = usb_get_intfdata(intf); | |
| if (!aru) | |
| return -ENODEV; | |
| aru->common.state = AR9170_IDLE; | |
| ar9170_usb_cancel_urbs(aru); | |
| return 0; | |
| } | |
| static int ar9170_resume(struct usb_interface *intf) | |
| { | |
| struct ar9170_usb *aru = usb_get_intfdata(intf); | |
| int err; | |
| if (!aru) | |
| return -ENODEV; | |
| usb_unpoison_anchored_urbs(&aru->rx_submitted); | |
| usb_unpoison_anchored_urbs(&aru->tx_submitted); | |
| /* | |
| * FIXME: firmware upload will fail on resume. | |
| * but this is better than a hang! | |
| */ | |
| err = ar9170_usb_init_device(aru); | |
| if (err) | |
| goto err_unrx; | |
| err = ar9170_usb_open(&aru->common); | |
| if (err) | |
| goto err_unrx; | |
| return 0; | |
| err_unrx: | |
| aru->common.state = AR9170_IDLE; | |
| ar9170_usb_cancel_urbs(aru); | |
| return err; | |
| } | |
| #endif /* CONFIG_PM */ | |
| static struct usb_driver ar9170_driver = { | |
| .name = "ar9170usb", | |
| .probe = ar9170_usb_probe, | |
| .disconnect = ar9170_usb_disconnect, | |
| .id_table = ar9170_usb_ids, | |
| .soft_unbind = 1, | |
| #ifdef CONFIG_PM | |
| .suspend = ar9170_suspend, | |
| .resume = ar9170_resume, | |
| #endif /* CONFIG_PM */ | |
| }; | |
| static int __init ar9170_init(void) | |
| { | |
| return usb_register(&ar9170_driver); | |
| } | |
| static void __exit ar9170_exit(void) | |
| { | |
| usb_deregister(&ar9170_driver); | |
| } | |
| module_init(ar9170_init); | |
| module_exit(ar9170_exit); |