drivers/input/misc/Kconfig - linux - Git at Google


            
            #

            
            # Input misc drivers configuration

            
            #

            
            menuconfig INPUT_MISC

            
            	bool "Miscellaneous devices"

            
            	help

            
            	  Say Y here, and a list of miscellaneous input drivers will be displayed.

            
            	  Everything that didn't fit into the other categories is here. This option

            
            	  doesn't affect the kernel.


            	  If unsure, say Y.


            if INPUT_MISC


            config INPUT_PCSPKR

            
            	tristate "PC Speaker support"

            
            	depends on PCSPKR_PLATFORM

            
            	help

            
            	  Say Y here if you want the standard PC Speaker to be used for

            
            	  bells and whistles.


            	  If unsure, say Y.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called pcspkr.


            config INPUT_SPARCSPKR

            
            	tristate "SPARC Speaker support"

            
            	depends on PCI && SPARC64

            
            	help

            
            	  Say Y here if you want the standard Speaker on Sparc PCI systems

            
            	  to be used for bells and whistles.


            	  If unsure, say Y.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called sparcspkr.


            config INPUT_M68K_BEEP

            
            	tristate "M68k Beeper support"

            
            	depends on M68K


            config INPUT_APANEL

            
            	tristate "Fujitsu Lifebook Application Panel buttons"

            
            	depends on X86 && I2C && LEDS_CLASS

            
            	select INPUT_POLLDEV

            
            	select CHECK_SIGNATURE

            
            	help

            
            	 Say Y here for support of the Application Panel buttons, used on

            
            	 Fujitsu Lifebook. These are attached to the mainboard through

            
            	 an SMBus interface managed by the I2C Intel ICH (i801) driver,

            
            	 which you should also build for this kernel.


            	 To compile this driver as a module, choose M here: the module will

            
            	 be called apanel.


            config INPUT_IXP4XX_BEEPER

            
            	tristate "IXP4XX Beeper support"

            
            	depends on ARCH_IXP4XX

            
            	help

            
            	  If you say yes here, you can connect a beeper to the

            
            	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.


            	  If unsure, say Y.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ixp4xx-beeper.


            config INPUT_COBALT_BTNS

            
            	tristate "Cobalt button interface"

            
            	depends on MIPS_COBALT

            
            	select INPUT_POLLDEV

            
            	help

            
            	  Say Y here if you want to support MIPS Cobalt button interface.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called cobalt_btns.


            config INPUT_WISTRON_BTNS

            
            	tristate "x86 Wistron laptop button interface"

            
            	depends on X86 && !X86_64

            
            	select INPUT_POLLDEV

            
            	select NEW_LEDS

            
            	select LEDS_CLASS

            
            	select CHECK_SIGNATURE

            
            	help

            
            	  Say Y here for support of Wistron laptop button interfaces, used on

            
            	  laptops of various brands, including Acer and Fujitsu-Siemens. If

            
            	  available, mail and wifi LEDs will be controllable via /sys/class/leds.


            	  To compile this driver as a module, choose M here: the module will

            
            	  be called wistron_btns.


            config INPUT_ATLAS_BTNS

            
            	tristate "x86 Atlas button interface"

            
            	depends on X86 && ACPI

            
            	help

            
            	  Say Y here for support of Atlas wallmount touchscreen buttons.

            
            	  The events will show up as scancodes F1 through F9 via evdev.


            	  To compile this driver as a module, choose M here: the module will

            
            	  be called atlas_btns.


            config INPUT_ATI_REMOTE

            
            	tristate "ATI / X10 USB RF remote control"

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.

            
            	  These are RF remotes with USB receivers.

            
            	  The ATI remote comes with many of ATI's All-In-Wonder video cards.

            
            	  The X10 "Lola" remote is available at:

            
            	     <http://www.x10.com/products/lola_sg1.htm>

            
            	  This driver provides mouse pointer, left and right mouse buttons,

            
            	  and maps all the other remote buttons to keypress events.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called ati_remote.


            config INPUT_ATI_REMOTE2

            
            	tristate "ATI / Philips USB RF remote control"

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  Say Y here if you want to use an ATI or Philips USB RF remote control.

            
            	  These are RF remotes with USB receivers.

            
            	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards

            
            	  and is also available as a separate product.

            
            	  This driver provides mouse pointer, left and right mouse buttons,

            
            	  and maps all the other remote buttons to keypress events.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called ati_remote2.


            config INPUT_KEYSPAN_REMOTE

            
            	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"

            
            	depends on EXPERIMENTAL

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  Say Y here if you want to use a Keyspan DMR USB remote control.

            
            	  Currently only the UIA-11 type of receiver has been tested.  The tag

            
            	  on the receiver that connects to the USB port should have a P/N that

            
            	  will tell you what type of DMR you have.  The UIA-10 type is not

            
            	  supported at this time.  This driver maps all buttons to keypress

            
            	  events.


            	  To compile this driver as a module, choose M here: the module will

            
            	  be called keyspan_remote.


            config INPUT_POWERMATE

            
            	tristate "Griffin PowerMate and Contour Jog support"

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.

            
            	  These are aluminum dials which can measure clockwise and anticlockwise

            
            	  rotation.  The dial also acts as a pushbutton.  The base contains an LED

            
            	  which can be instructed to pulse or to switch to a particular intensity.


            	  You can download userspace tools from

            
            	  <http://sowerbutts.com/powermate/>.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called powermate.


            config INPUT_YEALINK

            
            	tristate "Yealink usb-p1k voip phone"

            
            	depends on EXPERIMENTAL

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  Say Y here if you want to enable keyboard and LCD functions of the

            
            	  Yealink usb-p1k usb phones. The audio part is enabled by the generic

            
            	  usb sound driver, so you might want to enable that as well.


            	  For information about how to use these additional functions, see

            
            	  <file:Documentation/input/yealink.txt>.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called yealink.


            config INPUT_CM109

            
            	tristate "C-Media CM109 USB I/O Controller"

            
            	depends on EXPERIMENTAL

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  Say Y here if you want to enable keyboard and buzzer functions of the

            
            	  C-Media CM109 usb phones. The audio part is enabled by the generic

            
            	  usb sound driver, so you might want to enable that as well.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called cm109.


            config INPUT_UINPUT

            
            	tristate "User level driver support"

            
            	help

            
            	  Say Y here if you want to support user level drivers for input

            
            	  subsystem accessible under char device 10:223 - /dev/input/uinput.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called uinput.


            config INPUT_SGI_BTNS

            
            	tristate "SGI Indy/O2 volume button interface"

            
            	depends on SGI_IP22 || SGI_IP32

            
            	select INPUT_POLLDEV

            
            	help

            
            	  Say Y here if you want to support SGI Indy/O2 volume button interface.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called sgi_btns.


            config HP_SDC_RTC

            
            	tristate "HP SDC Real Time Clock"

            
            	depends on (GSC || HP300) && SERIO

            
            	select HP_SDC

            
            	help

            
            	  Say Y here if you want to support the built-in real time clock

            
            	  of the HP SDC controller.


            config INPUT_PCF50633_PMU

            
            	tristate "PCF50633 PMU events"

            
            	depends on MFD_PCF50633

            
            	help

            
            	 Say Y to include support for delivering  PMU events via  input

            
            	 layer on NXP PCF50633.


            config INPUT_GPIO_ROTARY_ENCODER

            
            	tristate "Rotary encoders connected to GPIO pins"

            
            	depends on GPIOLIB && GENERIC_GPIO

            
            	help

            
            	  Say Y here to add support for rotary encoders connected to GPIO lines.

            
            	  Check file:Documentation/incput/rotary_encoder.txt for more

            
            	  information.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called rotary_encoder.


            config INPUT_RB532_BUTTON

            
            	tristate "Mikrotik Routerboard 532 button interface"

            
            	depends on MIKROTIK_RB532

            
            	depends on GPIOLIB && GENERIC_GPIO

            
            	select INPUT_POLLDEV

            
            	help

            
            	  Say Y here if you want support for the S1 button built into

            
            	  Mikrotik's Routerboard 532.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called rb532_button.


            endif
	#
	# Input misc drivers configuration
	#
	menuconfig INPUT_MISC
	bool "Miscellaneous devices"
	help
	Say Y here, and a list of miscellaneous input drivers will be displayed.
	Everything that didn't fit into the other categories is here. This option
	doesn't affect the kernel.

	If unsure, say Y.

	if INPUT_MISC

	config INPUT_PCSPKR
	tristate "PC Speaker support"
	depends on PCSPKR_PLATFORM
	help
	Say Y here if you want the standard PC Speaker to be used for
	bells and whistles.

	If unsure, say Y.

	To compile this driver as a module, choose M here: the
	module will be called pcspkr.

	config INPUT_SPARCSPKR
	tristate "SPARC Speaker support"
	depends on PCI && SPARC64
	help
	Say Y here if you want the standard Speaker on Sparc PCI systems
	to be used for bells and whistles.

	If unsure, say Y.

	To compile this driver as a module, choose M here: the
	module will be called sparcspkr.

	config INPUT_M68K_BEEP
	tristate "M68k Beeper support"
	depends on M68K

	config INPUT_APANEL
	tristate "Fujitsu Lifebook Application Panel buttons"
	depends on X86 && I2C && LEDS_CLASS
	select INPUT_POLLDEV
	select CHECK_SIGNATURE
	help
	Say Y here for support of the Application Panel buttons, used on
	Fujitsu Lifebook. These are attached to the mainboard through
	an SMBus interface managed by the I2C Intel ICH (i801) driver,
	which you should also build for this kernel.

	To compile this driver as a module, choose M here: the module will
	be called apanel.

	config INPUT_IXP4XX_BEEPER
	tristate "IXP4XX Beeper support"
	depends on ARCH_IXP4XX
	help
	If you say yes here, you can connect a beeper to the
	ixp4xx gpio pins. This is used by the LinkSys NSLU2.

	If unsure, say Y.

	To compile this driver as a module, choose M here: the
	module will be called ixp4xx-beeper.

	config INPUT_COBALT_BTNS
	tristate "Cobalt button interface"
	depends on MIPS_COBALT
	select INPUT_POLLDEV
	help
	Say Y here if you want to support MIPS Cobalt button interface.

	To compile this driver as a module, choose M here: the
	module will be called cobalt_btns.

	config INPUT_WISTRON_BTNS
	tristate "x86 Wistron laptop button interface"
	depends on X86 && !X86_64
	select INPUT_POLLDEV
	select NEW_LEDS
	select LEDS_CLASS
	select CHECK_SIGNATURE
	help
	Say Y here for support of Wistron laptop button interfaces, used on
	laptops of various brands, including Acer and Fujitsu-Siemens. If
	available, mail and wifi LEDs will be controllable via /sys/class/leds.

	To compile this driver as a module, choose M here: the module will
	be called wistron_btns.

	config INPUT_ATLAS_BTNS
	tristate "x86 Atlas button interface"
	depends on X86 && ACPI
	help
	Say Y here for support of Atlas wallmount touchscreen buttons.
	The events will show up as scancodes F1 through F9 via evdev.

	To compile this driver as a module, choose M here: the module will
	be called atlas_btns.

	config INPUT_ATI_REMOTE
	tristate "ATI / X10 USB RF remote control"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
	These are RF remotes with USB receivers.
	The ATI remote comes with many of ATI's All-In-Wonder video cards.
	The X10 "Lola" remote is available at:
	<http://www.x10.com/products/lola_sg1.htm>
	This driver provides mouse pointer, left and right mouse buttons,
	and maps all the other remote buttons to keypress events.

	To compile this driver as a module, choose M here: the module will be
	called ati_remote.

	config INPUT_ATI_REMOTE2
	tristate "ATI / Philips USB RF remote control"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	Say Y here if you want to use an ATI or Philips USB RF remote control.
	These are RF remotes with USB receivers.
	ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
	and is also available as a separate product.
	This driver provides mouse pointer, left and right mouse buttons,
	and maps all the other remote buttons to keypress events.

	To compile this driver as a module, choose M here: the module will be
	called ati_remote2.

	config INPUT_KEYSPAN_REMOTE
	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	Say Y here if you want to use a Keyspan DMR USB remote control.
	Currently only the UIA-11 type of receiver has been tested. The tag
	on the receiver that connects to the USB port should have a P/N that
	will tell you what type of DMR you have. The UIA-10 type is not
	supported at this time. This driver maps all buttons to keypress
	events.

	To compile this driver as a module, choose M here: the module will
	be called keyspan_remote.

	config INPUT_POWERMATE
	tristate "Griffin PowerMate and Contour Jog support"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
	These are aluminum dials which can measure clockwise and anticlockwise
	rotation. The dial also acts as a pushbutton. The base contains an LED
	which can be instructed to pulse or to switch to a particular intensity.

	You can download userspace tools from
	<http://sowerbutts.com/powermate/>.

	To compile this driver as a module, choose M here: the
	module will be called powermate.

	config INPUT_YEALINK
	tristate "Yealink usb-p1k voip phone"
	depends on EXPERIMENTAL
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	Say Y here if you want to enable keyboard and LCD functions of the
	Yealink usb-p1k usb phones. The audio part is enabled by the generic
	usb sound driver, so you might want to enable that as well.

	For information about how to use these additional functions, see
	<file:Documentation/input/yealink.txt>.

	To compile this driver as a module, choose M here: the module will be
	called yealink.

	config INPUT_CM109
	tristate "C-Media CM109 USB I/O Controller"
	depends on EXPERIMENTAL
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	Say Y here if you want to enable keyboard and buzzer functions of the
	C-Media CM109 usb phones. The audio part is enabled by the generic
	usb sound driver, so you might want to enable that as well.

	To compile this driver as a module, choose M here: the module will be
	called cm109.

	config INPUT_UINPUT
	tristate "User level driver support"
	help
	Say Y here if you want to support user level drivers for input
	subsystem accessible under char device 10:223 - /dev/input/uinput.

	To compile this driver as a module, choose M here: the
	module will be called uinput.

	config INPUT_SGI_BTNS
	tristate "SGI Indy/O2 volume button interface"
	depends on SGI_IP22 \|\| SGI_IP32
	select INPUT_POLLDEV
	help
	Say Y here if you want to support SGI Indy/O2 volume button interface.

	To compile this driver as a module, choose M here: the
	module will be called sgi_btns.

	config HP_SDC_RTC
	tristate "HP SDC Real Time Clock"
	depends on (GSC \|\| HP300) && SERIO
	select HP_SDC
	help
	Say Y here if you want to support the built-in real time clock
	of the HP SDC controller.

	config INPUT_PCF50633_PMU
	tristate "PCF50633 PMU events"
	depends on MFD_PCF50633
	help
	Say Y to include support for delivering PMU events via input
	layer on NXP PCF50633.

	config INPUT_GPIO_ROTARY_ENCODER
	tristate "Rotary encoders connected to GPIO pins"
	depends on GPIOLIB && GENERIC_GPIO
	help
	Say Y here to add support for rotary encoders connected to GPIO lines.
	Check file:Documentation/incput/rotary_encoder.txt for more
	information.

	To compile this driver as a module, choose M here: the
	module will be called rotary_encoder.

	config INPUT_RB532_BUTTON
	tristate "Mikrotik Routerboard 532 button interface"
	depends on MIKROTIK_RB532
	depends on GPIOLIB && GENERIC_GPIO
	select INPUT_POLLDEV
	help
	Say Y here if you want support for the S1 button built into
	Mikrotik's Routerboard 532.

	To compile this driver as a module, choose M here: the
	module will be called rb532_button.

	endif