| /* |
| * Copyright (c) 2007-2008 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| /* */ |
| /* Module Name : ioctl.c */ |
| /* */ |
| /* Abstract */ |
| /* This module contains Linux wireless extension related functons. */ |
| /* */ |
| /* NOTES */ |
| /* Platform dependent. */ |
| /* */ |
| /************************************************************************/ |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/if_arp.h> |
| #include <linux/uaccess.h> |
| |
| #include "usbdrv.h" |
| |
| #define ZD_IOCTL_WPA (SIOCDEVPRIVATE + 1) |
| #define ZD_IOCTL_PARAM (SIOCDEVPRIVATE + 2) |
| #define ZD_IOCTL_GETWPAIE (SIOCDEVPRIVATE + 3) |
| #ifdef ZM_ENABLE_CENC |
| #define ZM_IOCTL_CENC (SIOCDEVPRIVATE + 4) |
| #endif /* ZM_ENABLE_CENC */ |
| #define ZD_PARAM_ROAMING 0x0001 |
| #define ZD_PARAM_PRIVACY 0x0002 |
| #define ZD_PARAM_WPA 0x0003 |
| #define ZD_PARAM_COUNTERMEASURES 0x0004 |
| #define ZD_PARAM_DROPUNENCRYPTED 0x0005 |
| #define ZD_PARAM_AUTH_ALGS 0x0006 |
| #define ZD_PARAM_WPS_FILTER 0x0007 |
| |
| #ifdef ZM_ENABLE_CENC |
| #define P80211_PACKET_CENCFLAG 0x0001 |
| #endif /* ZM_ENABLE_CENC */ |
| #define P80211_PACKET_SETKEY 0x0003 |
| |
| #define ZD_CMD_SET_ENCRYPT_KEY 0x0001 |
| #define ZD_CMD_SET_MLME 0x0002 |
| #define ZD_CMD_SCAN_REQ 0x0003 |
| #define ZD_CMD_SET_GENERIC_ELEMENT 0x0004 |
| #define ZD_CMD_GET_TSC 0x0005 |
| |
| #define ZD_CRYPT_ALG_NAME_LEN 16 |
| #define ZD_MAX_KEY_SIZE 32 |
| #define ZD_MAX_GENERIC_SIZE 64 |
| |
| #include <net/iw_handler.h> |
| |
| extern u16_t zfLnxGetVapId(zdev_t *dev); |
| |
| static const u32_t channel_frequency_11A[] = |
| { |
| /* Even element for Channel Number, Odd for Frequency */ |
| 36, 5180, |
| 40, 5200, |
| 44, 5220, |
| 48, 5240, |
| 52, 5260, |
| 56, 5280, |
| 60, 5300, |
| 64, 5320, |
| 100, 5500, |
| 104, 5520, |
| 108, 5540, |
| 112, 5560, |
| 116, 5580, |
| 120, 5600, |
| 124, 5620, |
| 128, 5640, |
| 132, 5660, |
| 136, 5680, |
| 140, 5700, |
| /**/ |
| 184, 4920, |
| 188, 4940, |
| 192, 4960, |
| 196, 4980, |
| 8, 5040, |
| 12, 5060, |
| 16, 5080, |
| 34, 5170, |
| 38, 5190, |
| 42, 5210, |
| 46, 5230, |
| /**/ |
| 149, 5745, |
| 153, 5765, |
| 157, 5785, |
| 161, 5805, |
| 165, 5825 |
| /**/ |
| }; |
| |
| int usbdrv_freq2chan(u32_t freq) |
| { |
| /* 2.4G Hz */ |
| if (freq > 2400 && freq < 3000) { |
| return ((freq-2412)/5) + 1; |
| } else { |
| u16_t ii; |
| u16_t num_chan = sizeof(channel_frequency_11A)/sizeof(u32_t); |
| |
| for (ii = 1; ii < num_chan; ii += 2) { |
| if (channel_frequency_11A[ii] == freq) |
| return channel_frequency_11A[ii-1]; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int usbdrv_chan2freq(int chan) |
| { |
| int freq; |
| |
| /* If channel number is out of range */ |
| if (chan > 165 || chan <= 0) |
| return -1; |
| |
| /* 2.4G band */ |
| if (chan >= 1 && chan <= 13) { |
| freq = (2412 + (chan - 1) * 5); |
| return freq; |
| } else if (chan >= 36 && chan <= 165) { |
| u16_t ii; |
| u16_t num_chan = sizeof(channel_frequency_11A)/sizeof(u32_t); |
| |
| for (ii = 0; ii < num_chan; ii += 2) { |
| if (channel_frequency_11A[ii] == chan) |
| return channel_frequency_11A[ii+1]; |
| } |
| |
| /* Can't find desired frequency */ |
| if (ii == num_chan) |
| return -1; |
| } |
| |
| /* Can't find deisred frequency */ |
| return -1; |
| } |
| |
| int usbdrv_ioctl_setessid(struct net_device *dev, struct iw_point *erq) |
| { |
| #ifdef ZM_HOSTAPD_SUPPORT |
| /* struct usbdrv_private *macp = dev->ml_priv; */ |
| char essidbuf[IW_ESSID_MAX_SIZE+1]; |
| int i; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| memset(essidbuf, 0, sizeof(essidbuf)); |
| |
| printk(KERN_ERR "usbdrv_ioctl_setessid\n"); |
| |
| /* printk("ssidlen=%d\n", erq->length); //for any, it is 1. */ |
| if (erq->flags) { |
| if (erq->length > (IW_ESSID_MAX_SIZE+1)) |
| return -E2BIG; |
| |
| if (copy_from_user(essidbuf, erq->pointer, erq->length)) |
| return -EFAULT; |
| } |
| |
| /* zd_DisasocAll(2); */ |
| /* wait_ms(100); */ |
| |
| printk(KERN_ERR "essidbuf: "); |
| |
| for (i = 0; i < erq->length; i++) |
| printk(KERN_ERR "%02x ", essidbuf[i]); |
| |
| printk(KERN_ERR "\n"); |
| |
| essidbuf[erq->length] = '\0'; |
| /* memcpy(macp->wd.ws.ssid, essidbuf, erq->length); */ |
| /* macp->wd.ws.ssidLen = strlen(essidbuf)+2; */ |
| /* macp->wd.ws.ssid[1] = strlen(essidbuf); Update ssid length */ |
| |
| zfiWlanSetSSID(dev, essidbuf, erq->length); |
| #if 0 |
| printk(KERN_ERR "macp->wd.ws.ssid: "); |
| |
| for (i = 0; i < macp->wd.ws.ssidLen; i++) |
| printk(KERN_ERR "%02x ", macp->wd.ws.ssid[i]); |
| |
| printk(KERN_ERR "\n"); |
| #endif |
| |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| |
| #endif |
| |
| return 0; |
| } |
| |
| int usbdrv_ioctl_getessid(struct net_device *dev, struct iw_point *erq) |
| { |
| /* struct usbdrv_private *macp = dev->ml_priv; */ |
| u8_t essidbuf[IW_ESSID_MAX_SIZE+1]; |
| u8_t len; |
| u8_t i; |
| |
| |
| /* len = macp->wd.ws.ssidLen; */ |
| /* memcpy(essidbuf, macp->wd.ws.ssid, macp->wd.ws.ssidLen); */ |
| zfiWlanQuerySSID(dev, essidbuf, &len); |
| |
| essidbuf[len] = 0; |
| |
| printk(KERN_ERR "ESSID: "); |
| |
| for (i = 0; i < len; i++) |
| printk(KERN_ERR "%c", essidbuf[i]); |
| |
| printk(KERN_ERR "\n"); |
| |
| erq->flags = 1; |
| erq->length = strlen(essidbuf) + 1; |
| |
| if (erq->pointer) { |
| if (copy_to_user(erq->pointer, essidbuf, erq->length)) |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| int usbdrv_ioctl_setrts(struct net_device *dev, struct iw_param *rrq) |
| { |
| return 0; |
| } |
| |
| /* |
| * Encode a WPA or RSN information element as a custom |
| * element using the hostap format. |
| */ |
| u32 encode_ie(void *buf, u32 bufsize, const u8 *ie, u32 ielen, |
| const u8 *leader, u32 leader_len) |
| { |
| u8 *p; |
| u32 i; |
| |
| if (bufsize < leader_len) |
| return 0; |
| p = buf; |
| memcpy(p, leader, leader_len); |
| bufsize -= leader_len; |
| p += leader_len; |
| for (i = 0; i < ielen && bufsize > 2; i++) |
| p += sprintf(p, "%02x", ie[i]); |
| return (i == ielen ? p - (u8 *)buf:0); |
| } |
| |
| /* |
| * Translate scan data returned from the card to a card independent |
| * format that the Wireless Tools will understand |
| */ |
| char *usbdrv_translate_scan(struct net_device *dev, |
| struct iw_request_info *info, char *current_ev, |
| char *end_buf, struct zsBssInfo *list) |
| { |
| struct iw_event iwe; /* Temporary buffer */ |
| u16_t capabilities; |
| char *current_val; /* For rates */ |
| char *last_ev; |
| int i; |
| char buf[64*2 + 30]; |
| |
| last_ev = current_ev; |
| |
| /* First entry *MUST* be the AP MAC address */ |
| iwe.cmd = SIOCGIWAP; |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN); |
| current_ev = iwe_stream_add_event(info, current_ev, |
| end_buf, &iwe, IW_EV_ADDR_LEN); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| /* Other entries will be displayed in the order we give them */ |
| |
| /* Add the ESSID */ |
| iwe.u.data.length = list->ssid[1]; |
| if (iwe.u.data.length > 32) |
| iwe.u.data.length = 32; |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.flags = 1; |
| current_ev = iwe_stream_add_point(info, current_ev, |
| end_buf, &iwe, &list->ssid[2]); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| /* Add mode */ |
| iwe.cmd = SIOCGIWMODE; |
| capabilities = (list->capability[1] << 8) + list->capability[0]; |
| if (capabilities & (0x01 | 0x02)) { |
| if (capabilities & 0x01) |
| iwe.u.mode = IW_MODE_MASTER; |
| else |
| iwe.u.mode = IW_MODE_ADHOC; |
| current_ev = iwe_stream_add_event(info, current_ev, |
| end_buf, &iwe, IW_EV_UINT_LEN); |
| } |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| /* Add frequency */ |
| iwe.cmd = SIOCGIWFREQ; |
| iwe.u.freq.m = list->channel; |
| /* Channel frequency in KHz */ |
| if (iwe.u.freq.m > 14) { |
| if ((184 <= iwe.u.freq.m) && (iwe.u.freq.m <= 196)) |
| iwe.u.freq.m = 4000 + iwe.u.freq.m * 5; |
| else |
| iwe.u.freq.m = 5000 + iwe.u.freq.m * 5; |
| } else { |
| if (iwe.u.freq.m == 14) |
| iwe.u.freq.m = 2484; |
| else |
| iwe.u.freq.m = 2412 + (iwe.u.freq.m - 1) * 5; |
| } |
| iwe.u.freq.e = 6; |
| current_ev = iwe_stream_add_event(info, current_ev, |
| end_buf, &iwe, IW_EV_FREQ_LEN); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| /* Add quality statistics */ |
| iwe.cmd = IWEVQUAL; |
| iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
| | IW_QUAL_NOISE_UPDATED; |
| iwe.u.qual.level = list->signalStrength; |
| iwe.u.qual.noise = 0; |
| iwe.u.qual.qual = list->signalQuality; |
| current_ev = iwe_stream_add_event(info, current_ev, |
| end_buf, &iwe, IW_EV_QUAL_LEN); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| /* Add encryption capability */ |
| |
| iwe.cmd = SIOCGIWENCODE; |
| if (capabilities & 0x10) |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
| else |
| iwe.u.data.flags = IW_ENCODE_DISABLED; |
| |
| iwe.u.data.length = 0; |
| current_ev = iwe_stream_add_point(info, current_ev, |
| end_buf, &iwe, list->ssid); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| /* Rate : stuffing multiple values in a single event require a bit |
| * more of magic |
| */ |
| current_val = current_ev + IW_EV_LCP_LEN; |
| |
| iwe.cmd = SIOCGIWRATE; |
| /* Those two flags are ignored... */ |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; |
| |
| for (i = 0 ; i < list->supportedRates[1] ; i++) { |
| /* Bit rate given in 500 kb/s units (+ 0x80) */ |
| iwe.u.bitrate.value = ((list->supportedRates[i+2] & 0x7f) |
| * 500000); |
| /* Add new value to event */ |
| current_val = iwe_stream_add_value(info, current_ev, |
| current_val, end_buf, &iwe, IW_EV_PARAM_LEN); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_val) |
| return end_buf; |
| |
| last_ev = current_val; |
| } |
| |
| for (i = 0 ; i < list->extSupportedRates[1] ; i++) { |
| /* Bit rate given in 500 kb/s units (+ 0x80) */ |
| iwe.u.bitrate.value = ((list->extSupportedRates[i+2] & 0x7f) |
| * 500000); |
| /* Add new value to event */ |
| current_val = iwe_stream_add_value(info, current_ev, |
| current_val, end_buf, &iwe, IW_EV_PARAM_LEN); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_val) |
| return end_buf; |
| |
| last_ev = current_ev; |
| } |
| |
| /* Check if we added any event */ |
| if ((current_val - current_ev) > IW_EV_LCP_LEN) |
| current_ev = current_val; |
| #define IEEE80211_ELEMID_RSN 0x30 |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| snprintf(buf, sizeof(buf), "bcn_int=%d", (list->beaconInterval[1] << 8) |
| + list->beaconInterval[0]); |
| iwe.u.data.length = strlen(buf); |
| current_ev = iwe_stream_add_point(info, current_ev, |
| end_buf, &iwe, buf); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| |
| if (list->wpaIe[1] != 0) { |
| static const char rsn_leader[] = "rsn_ie="; |
| static const char wpa_leader[] = "wpa_ie="; |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| if (list->wpaIe[0] == IEEE80211_ELEMID_RSN) |
| iwe.u.data.length = encode_ie(buf, sizeof(buf), |
| list->wpaIe, list->wpaIe[1]+2, |
| rsn_leader, sizeof(rsn_leader)-1); |
| else |
| iwe.u.data.length = encode_ie(buf, sizeof(buf), |
| list->wpaIe, list->wpaIe[1]+2, |
| wpa_leader, sizeof(wpa_leader)-1); |
| |
| if (iwe.u.data.length != 0) |
| current_ev = iwe_stream_add_point(info, current_ev, |
| end_buf, &iwe, buf); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| } |
| |
| if (list->rsnIe[1] != 0) { |
| static const char rsn_leader[] = "rsn_ie="; |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| |
| if (list->rsnIe[0] == IEEE80211_ELEMID_RSN) { |
| iwe.u.data.length = encode_ie(buf, sizeof(buf), |
| list->rsnIe, list->rsnIe[1]+2, |
| rsn_leader, sizeof(rsn_leader)-1); |
| if (iwe.u.data.length != 0) |
| current_ev = iwe_stream_add_point(info, |
| current_ev, end_buf, &iwe, buf); |
| |
| /* Ran out of buffer */ |
| if (last_ev == current_ev) |
| return end_buf; |
| |
| last_ev = current_ev; |
| } |
| } |
| /* The other data in the scan result are not really |
| * interesting, so for now drop it |
| */ |
| return current_ev; |
| } |
| |
| int usbdrvwext_giwname(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrq, char *extra) |
| { |
| /* struct usbdrv_private *macp = dev->ml_priv; */ |
| |
| strcpy(wrq->name, "IEEE 802.11-MIMO"); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwfreq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *freq, char *extra) |
| { |
| u32_t FreqKHz; |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (freq->e > 1) |
| return -EINVAL; |
| |
| if (freq->e == 1) { |
| FreqKHz = (freq->m / 100000); |
| |
| if (FreqKHz > 4000000) { |
| if (FreqKHz > 5825000) |
| FreqKHz = 5825000; |
| else if (FreqKHz < 4920000) |
| FreqKHz = 4920000; |
| else if (FreqKHz < 5000000) |
| FreqKHz = (((FreqKHz - 4000000) / 5000) * 5000) |
| + 4000000; |
| else |
| FreqKHz = (((FreqKHz - 5000000) / 5000) * 5000) |
| + 5000000; |
| } else { |
| if (FreqKHz > 2484000) |
| FreqKHz = 2484000; |
| else if (FreqKHz < 2412000) |
| FreqKHz = 2412000; |
| else |
| FreqKHz = (((FreqKHz - 2412000) / 5000) * 5000) |
| + 2412000; |
| } |
| } else { |
| FreqKHz = usbdrv_chan2freq(freq->m); |
| |
| if (FreqKHz != -1) |
| FreqKHz *= 1000; |
| else |
| FreqKHz = 2412000; |
| } |
| |
| /* printk("freq->m: %d, freq->e: %d\n", freq->m, freq->e); */ |
| /* printk("FreqKHz: %d\n", FreqKHz); */ |
| |
| if (macp->DeviceOpened == 1) { |
| zfiWlanSetFrequency(dev, FreqKHz, 0); /* Immediate */ |
| /* u8_t wpaieLen,wpaie[50]; */ |
| /* zfiWlanQueryWpaIe(dev, wpaie, &wpaieLen); */ |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| /* if (wpaieLen > 2) */ |
| /* zfiWlanSetWpaIe(dev, wpaie, wpaieLen); */ |
| } |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwfreq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *freq, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| freq->m = zfiWlanQueryFrequency(dev); |
| freq->e = 3; |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwmode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrq, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u8_t WlanMode; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| switch (wrq->mode) { |
| case IW_MODE_MASTER: |
| WlanMode = ZM_MODE_AP; |
| break; |
| case IW_MODE_INFRA: |
| WlanMode = ZM_MODE_INFRASTRUCTURE; |
| break; |
| case IW_MODE_ADHOC: |
| WlanMode = ZM_MODE_IBSS; |
| break; |
| default: |
| WlanMode = ZM_MODE_IBSS; |
| break; |
| } |
| |
| zfiWlanSetWlanMode(dev, WlanMode); |
| zfiWlanDisable(dev, 1); |
| zfiWlanEnable(dev); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwmode(struct net_device *dev, |
| struct iw_request_info *info, |
| __u32 *mode, char *extra) |
| { |
| unsigned long irqFlag; |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| spin_lock_irqsave(&macp->cs_lock, irqFlag); |
| |
| switch (zfiWlanQueryWlanMode(dev)) { |
| case ZM_MODE_AP: |
| *mode = IW_MODE_MASTER; |
| break; |
| case ZM_MODE_INFRASTRUCTURE: |
| *mode = IW_MODE_INFRA; |
| break; |
| case ZM_MODE_IBSS: |
| *mode = IW_MODE_ADHOC; |
| break; |
| default: |
| *mode = IW_MODE_ADHOC; |
| break; |
| } |
| |
| spin_unlock_irqrestore(&macp->cs_lock, irqFlag); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwsens(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *sens, char *extra) |
| { |
| return 0; |
| } |
| |
| int usbdrvwext_giwsens(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *sens, char *extra) |
| { |
| sens->value = 0; |
| sens->fixed = 1; |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwrange(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct iw_range *range = (struct iw_range *) extra; |
| int i, val; |
| /* int num_band_a; */ |
| u16_t channels[60]; |
| u16_t channel_num; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| range->txpower_capa = IW_TXPOW_DBM; |
| /* XXX what about min/max_pmp, min/max_pmt, etc. */ |
| |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 13; |
| |
| range->retry_capa = IW_RETRY_LIMIT; |
| range->retry_flags = IW_RETRY_LIMIT; |
| range->min_retry = 0; |
| range->max_retry = 255; |
| |
| channel_num = zfiWlanQueryAllowChannels(dev, channels); |
| |
| /* Gurantee reported channel numbers is less |
| * or equal to IW_MAX_FREQUENCIES |
| */ |
| if (channel_num > IW_MAX_FREQUENCIES) |
| channel_num = IW_MAX_FREQUENCIES; |
| |
| val = 0; |
| |
| for (i = 0; i < channel_num; i++) { |
| range->freq[val].i = usbdrv_freq2chan(channels[i]); |
| range->freq[val].m = channels[i]; |
| range->freq[val].e = 6; |
| val++; |
| } |
| |
| range->num_channels = channel_num; |
| range->num_frequency = channel_num; |
| |
| #if 0 |
| range->num_channels = 14; /* Only 2.4G */ |
| |
| /* XXX need to filter against the regulatory domain &| active set */ |
| val = 0; |
| /* B,G Bands */ |
| for (i = 1; i <= 14; i++) { |
| range->freq[val].i = i; |
| if (i == 14) |
| range->freq[val].m = 2484000; |
| else |
| range->freq[val].m = (2412+(i-1)*5)*1000; |
| range->freq[val].e = 3; |
| val++; |
| } |
| |
| num_band_a = (IW_MAX_FREQUENCIES - val); |
| /* A Bands */ |
| for (i = 0; i < num_band_a; i++) { |
| range->freq[val].i = channel_frequency_11A[2 * i]; |
| range->freq[val].m = channel_frequency_11A[2 * i + 1] * 1000; |
| range->freq[val].e = 3; |
| val++; |
| } |
| /* MIMO Rate Not Defined Now |
| * For 802.11a, there are too more frequency. |
| * We can't return them all. |
| */ |
| range->num_frequency = val; |
| #endif |
| |
| /* Max of /proc/net/wireless */ |
| range->max_qual.qual = 100; /* ?? 92; */ |
| range->max_qual.level = 154; /* ?? */ |
| range->max_qual.noise = 154; /* ?? */ |
| range->sensitivity = 3; /* ?? */ |
| |
| /* XXX these need to be nsd-specific! */ |
| range->min_rts = 0; |
| range->max_rts = 2347; |
| range->min_frag = 256; |
| range->max_frag = 2346; |
| range->max_encoding_tokens = 4 /* NUM_WEPKEYS ?? */; |
| range->num_encoding_sizes = 2; /* ?? */ |
| |
| range->encoding_size[0] = 5; /* ?? WEP Key Encoding Size */ |
| range->encoding_size[1] = 13; /* ?? */ |
| |
| /* XXX what about num_bitrates/throughput? */ |
| range->num_bitrates = 0; /* ?? */ |
| |
| /* estimated max throughput |
| * XXX need to cap it if we're running at ~2Mbps.. |
| */ |
| |
| range->throughput = 300000000; |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwap(struct net_device *dev, struct iw_request_info *info, |
| struct sockaddr *MacAddr, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (zfiWlanQueryWlanMode(dev) == ZM_MODE_AP) { |
| /* AP Mode */ |
| zfiWlanSetMacAddress(dev, (u16_t *)&MacAddr->sa_data[0]); |
| } else { |
| /* STA Mode */ |
| zfiWlanSetBssid(dev, &MacAddr->sa_data[0]); |
| } |
| |
| if (macp->DeviceOpened == 1) { |
| /* u8_t wpaieLen,wpaie[80]; */ |
| /* zfiWlanQueryWpaIe(dev, wpaie, &wpaieLen); */ |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| /* if (wpaieLen > 2) */ |
| /* zfiWlanSetWpaIe(dev, wpaie, wpaieLen); */ |
| } |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwap(struct net_device *dev, |
| struct iw_request_info *info, |
| struct sockaddr *MacAddr, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| if (zfiWlanQueryWlanMode(dev) == ZM_MODE_AP) { |
| /* AP Mode */ |
| zfiWlanQueryMacAddress(dev, &MacAddr->sa_data[0]); |
| } else { |
| /* STA Mode */ |
| if (macp->adapterState == ZM_STATUS_MEDIA_CONNECT) { |
| zfiWlanQueryBssid(dev, &MacAddr->sa_data[0]); |
| } else { |
| u8_t zero_addr[6] = { 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00 }; |
| memcpy(&MacAddr->sa_data[0], zero_addr, |
| sizeof(zero_addr)); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int usbdrvwext_iwaplist(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| /* Don't know how to do yet--CWYang(+) */ |
| return 0; |
| |
| } |
| |
| int usbdrvwext_siwscan(struct net_device *dev, struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| printk(KERN_WARNING "CWY - usbdrvwext_siwscan\n"); |
| |
| zfiWlanScan(dev); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwscan(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| /* struct zsWlanDev* wd = (struct zsWlanDev*) zmw_wlan_dev(dev); */ |
| char *current_ev = extra; |
| char *end_buf; |
| int i; |
| struct zsBssListV1 *pBssList; |
| /* BssList = wd->sta.pBssList; */ |
| /* zmw_get_wlan_dev(dev); */ |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| /* struct zsBssList BssList; */ |
| pBssList = kmalloc(sizeof(struct zsBssListV1), GFP_KERNEL); |
| if (pBssList == NULL) |
| return -ENOMEM; |
| |
| if (data->length == 0) |
| end_buf = extra + IW_SCAN_MAX_DATA; |
| else |
| end_buf = extra + data->length; |
| |
| printk(KERN_WARNING "giwscan - Report Scan Results\n"); |
| /* printk("giwscan - BssList Sreucture Len : %d\n", sizeof(BssList)); |
| * printk("giwscan - BssList Count : %d\n", |
| * wd->sta.pBssList->bssCount); |
| * printk("giwscan - UpdateBssList Count : %d\n", |
| * wd->sta.pUpdateBssList->bssCount); |
| */ |
| zfiWlanQueryBssListV1(dev, pBssList); |
| /* zfiWlanQueryBssList(dev, &BssList); */ |
| |
| /* Read and parse all entries */ |
| printk(KERN_WARNING "giwscan - pBssList->bssCount : %d\n", |
| pBssList->bssCount); |
| /* printk("giwscan - BssList.bssCount : %d\n", BssList.bssCount); */ |
| |
| for (i = 0; i < pBssList->bssCount; i++) { |
| /* Translate to WE format this entry |
| * current_ev = usbdrv_translate_scan(dev, info, current_ev, |
| * extra + IW_SCAN_MAX_DATA, &pBssList->bssInfo[i]); |
| */ |
| current_ev = usbdrv_translate_scan(dev, info, current_ev, |
| end_buf, &pBssList->bssInfo[i]); |
| |
| if (current_ev == end_buf) { |
| kfree(pBssList); |
| data->length = current_ev - extra; |
| return -E2BIG; |
| } |
| } |
| |
| /* Length of data */ |
| data->length = (current_ev - extra); |
| data->flags = 0; /* todo */ |
| |
| kfree(pBssList); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwessid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *essid, char *extra) |
| { |
| char EssidBuf[IW_ESSID_MAX_SIZE + 1]; |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (essid->flags == 1) { |
| if (essid->length > IW_ESSID_MAX_SIZE) |
| return -E2BIG; |
| |
| if (copy_from_user(&EssidBuf, essid->pointer, essid->length)) |
| return -EFAULT; |
| |
| EssidBuf[essid->length] = '\0'; |
| /* printk("siwessid - Set Essid : %s\n",EssidBuf); */ |
| /* printk("siwessid - Essid Len : %d\n",essid->length); */ |
| /* printk("siwessid - Essid Flag : %x\n",essid->flags); */ |
| if (macp->DeviceOpened == 1) { |
| zfiWlanSetSSID(dev, EssidBuf, strlen(EssidBuf)); |
| zfiWlanSetFrequency(dev, zfiWlanQueryFrequency(dev), |
| FALSE); |
| zfiWlanSetEncryMode(dev, zfiWlanQueryEncryMode(dev)); |
| /* u8_t wpaieLen,wpaie[50]; */ |
| /* zfiWlanQueryWpaIe(dev, wpaie, &wpaieLen); */ |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| /* if (wpaieLen > 2) */ |
| /* zfiWlanSetWpaIe(dev, wpaie, wpaieLen); */ |
| } |
| } |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwessid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *essid, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u8_t EssidLen; |
| char EssidBuf[IW_ESSID_MAX_SIZE + 1]; |
| int ssid_len; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| zfiWlanQuerySSID(dev, &EssidBuf[0], &EssidLen); |
| |
| /* Convert type from unsigned char to char */ |
| ssid_len = (int)EssidLen; |
| |
| /* Make sure the essid length is not greater than IW_ESSID_MAX_SIZE */ |
| if (ssid_len > IW_ESSID_MAX_SIZE) |
| ssid_len = IW_ESSID_MAX_SIZE; |
| |
| EssidBuf[ssid_len] = '\0'; |
| |
| essid->flags = 1; |
| essid->length = strlen(EssidBuf); |
| |
| memcpy(extra, EssidBuf, essid->length); |
| /* wireless.c in Kernel would handle copy_to_user -- line 679 */ |
| /* if (essid->pointer) { |
| * if (copy_to_user(essid->pointer, EssidBuf, essid->length)) { |
| * printk("giwessid - copy_to_user Fail\n"); |
| * return -EFAULT; |
| * } |
| * } |
| */ |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwnickn(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *nickname) |
| { |
| /* Exist but junk--CWYang(+) */ |
| return 0; |
| } |
| |
| int usbdrvwext_giwnickn(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, char *nickname) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u8_t EssidLen; |
| char EssidBuf[IW_ESSID_MAX_SIZE + 1]; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| zfiWlanQuerySSID(dev, &EssidBuf[0], &EssidLen); |
| EssidBuf[EssidLen] = 0; |
| |
| data->flags = 1; |
| data->length = strlen(EssidBuf); |
| |
| memcpy(nickname, EssidBuf, data->length); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwrate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frq, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| /* Array to Define Rate Number that Send to Driver */ |
| u16_t zcIndextoRateBG[16] = {1000, 2000, 5500, 11000, 0, 0, 0, 0, |
| 48000, 24000, 12000, 6000, 54000, 36000, 18000, 9000}; |
| u16_t zcRateToMCS[] = {0xff, 0, 1, 2, 3, 0xb, 0xf, 0xa, 0xe, 0x9, 0xd, |
| 0x8, 0xc}; |
| u8_t i, RateIndex = 4; |
| u16_t RateKbps; |
| |
| /* printk("frq->disabled : 0x%x\n",frq->disabled); */ |
| /* printk("frq->value : 0x%x\n",frq->value); */ |
| |
| RateKbps = frq->value / 1000; |
| /* printk("RateKbps : %d\n", RateKbps); */ |
| for (i = 0; i < 16; i++) { |
| if (RateKbps == zcIndextoRateBG[i]) |
| RateIndex = i; |
| } |
| |
| if (zcIndextoRateBG[RateIndex] == 0) |
| RateIndex = 0xff; |
| /* printk("RateIndex : %x\n", RateIndex); */ |
| for (i = 0; i < 13; i++) |
| if (RateIndex == zcRateToMCS[i]) |
| break; |
| /* printk("Index : %x\n", i); */ |
| if (RateKbps == 65000) { |
| RateIndex = 20; |
| printk(KERN_WARNING "RateIndex : %d\n", RateIndex); |
| } |
| |
| if (macp->DeviceOpened == 1) { |
| zfiWlanSetTxRate(dev, i); |
| /* zfiWlanDisable(dev); */ |
| /* zfiWlanEnable(dev); */ |
| } |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwrate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frq, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| frq->fixed = 0; |
| frq->disabled = 0; |
| frq->value = zfiWlanQueryRxRate(dev) * 1000; |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwrts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rts, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| int val = rts->value; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| if (rts->disabled) |
| val = 2347; |
| |
| if ((val < 0) || (val > 2347)) |
| return -EINVAL; |
| |
| zfiWlanSetRtsThreshold(dev, val); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwrts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rts, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| rts->value = zfiWlanQueryRtsThreshold(dev); |
| rts->disabled = (rts->value >= 2347); |
| rts->fixed = 1; |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwfrag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frag, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u16_t fragThreshold; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| if (frag->disabled) |
| fragThreshold = 0; |
| else |
| fragThreshold = frag->value; |
| |
| zfiWlanSetFragThreshold(dev, fragThreshold); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwfrag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frag, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u16 val; |
| unsigned long irqFlag; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| spin_lock_irqsave(&macp->cs_lock, irqFlag); |
| |
| val = zfiWlanQueryFragThreshold(dev); |
| |
| frag->value = val; |
| |
| frag->disabled = (val >= 2346); |
| frag->fixed = 1; |
| |
| spin_unlock_irqrestore(&macp->cs_lock, irqFlag); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwtxpow(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| /* Not support yet--CWYng(+) */ |
| return 0; |
| } |
| |
| int usbdrvwext_giwtxpow(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| /* Not support yet--CWYng(+) */ |
| return 0; |
| } |
| |
| int usbdrvwext_siwretry(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| /* Do nothing--CWYang(+) */ |
| return 0; |
| } |
| |
| int usbdrvwext_giwretry(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, char *extra) |
| { |
| /* Do nothing--CWYang(+) */ |
| return 0; |
| } |
| |
| int usbdrvwext_siwencode(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, char *key) |
| { |
| struct zsKeyInfo keyInfo; |
| int i; |
| int WepState = ZM_ENCRYPTION_WEP_DISABLED; |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if ((erq->flags & IW_ENCODE_DISABLED) == 0) { |
| keyInfo.key = key; |
| keyInfo.keyLength = erq->length; |
| keyInfo.keyIndex = (erq->flags & IW_ENCODE_INDEX) - 1; |
| if (keyInfo.keyIndex >= 4) |
| keyInfo.keyIndex = 0; |
| keyInfo.flag = ZM_KEY_FLAG_DEFAULT_KEY; |
| |
| zfiWlanSetKey(dev, keyInfo); |
| WepState = ZM_ENCRYPTION_WEP_ENABLED; |
| } else { |
| for (i = 1; i < 4; i++) |
| zfiWlanRemoveKey(dev, 0, i); |
| WepState = ZM_ENCRYPTION_WEP_DISABLED; |
| /* zfiWlanSetEncryMode(dev, ZM_NO_WEP); */ |
| } |
| |
| if (macp->DeviceOpened == 1) { |
| zfiWlanSetWepStatus(dev, WepState); |
| zfiWlanSetFrequency(dev, zfiWlanQueryFrequency(dev), FALSE); |
| /* zfiWlanSetEncryMode(dev, zfiWlanQueryEncryMode(dev)); */ |
| /* u8_t wpaieLen,wpaie[50]; */ |
| /* zfiWlanQueryWpaIe(dev, wpaie, &wpaieLen); */ |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| /* if (wpaieLen > 2) */ |
| /* zfiWlanSetWpaIe(dev, wpaie, wpaieLen); */ |
| } |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwencode(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, char *key) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u8_t EncryptionMode; |
| u8_t keyLen = 0; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| EncryptionMode = zfiWlanQueryEncryMode(dev); |
| |
| if (EncryptionMode) |
| erq->flags = IW_ENCODE_ENABLED; |
| else |
| erq->flags = IW_ENCODE_DISABLED; |
| |
| /* We can't return the key, so set the proper flag and return zero */ |
| erq->flags |= IW_ENCODE_NOKEY; |
| memset(key, 0, 16); |
| |
| /* Copy the key to the user buffer */ |
| switch (EncryptionMode) { |
| case ZM_WEP64: |
| keyLen = 5; |
| break; |
| case ZM_WEP128: |
| keyLen = 13; |
| break; |
| case ZM_WEP256: |
| keyLen = 29; |
| break; |
| case ZM_AES: |
| keyLen = 16; |
| break; |
| case ZM_TKIP: |
| keyLen = 32; |
| break; |
| #ifdef ZM_ENABLE_CENC |
| case ZM_CENC: |
| /* ZM_ENABLE_CENC */ |
| keyLen = 32; |
| break; |
| #endif |
| case ZM_NO_WEP: |
| keyLen = 0; |
| break; |
| default: |
| keyLen = 0; |
| printk(KERN_ERR "Unknown EncryMode\n"); |
| break; |
| } |
| erq->length = keyLen; |
| |
| return 0; |
| } |
| |
| int usbdrvwext_siwpower(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frq, char *extra) |
| { |
| struct usbdrv_private *macp = dev->ml_priv; |
| u8_t PSMode; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| if (frq->disabled) |
| PSMode = ZM_STA_PS_NONE; |
| else |
| PSMode = ZM_STA_PS_MAX; |
| |
| zfiWlanSetPowerSaveMode(dev, PSMode); |
| |
| return 0; |
| } |
| |
| int usbdrvwext_giwpower(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frq, char *extra) |
| { |
| unsigned long irqFlag; |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| if (macp->DeviceOpened != 1) |
| return 0; |
| |
| spin_lock_irqsave(&macp->cs_lock, irqFlag); |
| |
| if (zfiWlanQueryPowerSaveMode(dev) == ZM_STA_PS_NONE) |
| frq->disabled = 1; |
| else |
| frq->disabled = 0; |
| |
| spin_unlock_irqrestore(&macp->cs_lock, irqFlag); |
| |
| return 0; |
| } |
| |
| /*int usbdrvwext_setparam(struct net_device *dev, struct iw_request_info *info, |
| * void *w, char *extra) |
| *{ |
| * struct ieee80211vap *vap = dev->ml_priv; |
| * struct ieee80211com *ic = vap->iv_ic; |
| * struct ieee80211_rsnparms *rsn = &vap->iv_bss->ni_rsn; |
| * int *i = (int *) extra; |
| * int param = i[0]; // parameter id is 1st |
| * int value = i[1]; // NB: most values are TYPE_INT |
| * int retv = 0; |
| * int j, caps; |
| * const struct ieee80211_authenticator *auth; |
| * const struct ieee80211_aclator *acl; |
| * |
| * switch (param) { |
| * case IEEE80211_PARAM_AUTHMODE: |
| * switch (value) { |
| * case IEEE80211_AUTH_WPA: // WPA |
| * case IEEE80211_AUTH_8021X: // 802.1x |
| * case IEEE80211_AUTH_OPEN: // open |
| * case IEEE80211_AUTH_SHARED: // shared-key |
| * case IEEE80211_AUTH_AUTO: // auto |
| * auth = ieee80211_authenticator_get(value); |
| * if (auth == NULL) |
| * return -EINVAL; |
| * break; |
| * default: |
| * return -EINVAL; |
| * } |
| * switch (value) { |
| * case IEEE80211_AUTH_WPA: // WPA w/ 802.1x |
| * vap->iv_flags |= IEEE80211_F_PRIVACY; |
| * value = IEEE80211_AUTH_8021X; |
| * break; |
| * case IEEE80211_AUTH_OPEN: // open |
| * vap->iv_flags &= ~(IEEE80211_F_WPA | IEEE80211_F_PRIVACY); |
| * break; |
| * case IEEE80211_AUTH_SHARED: // shared-key |
| * case IEEE80211_AUTH_AUTO: // auto |
| * case IEEE80211_AUTH_8021X: // 802.1x |
| * vap->iv_flags &= ~IEEE80211_F_WPA; |
| * // both require a key so mark the PRIVACY capability |
| * vap->iv_flags |= IEEE80211_F_PRIVACY; |
| * break; |
| * } |
| * // NB: authenticator attach/detach happens on state change |
| * vap->iv_bss->ni_authmode = value; |
| * // XXX mixed/mode/usage? |
| * vap->iv_auth = auth; |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_PROTMODE: |
| * if (value > IEEE80211_PROT_RTSCTS) |
| * return -EINVAL; |
| * ic->ic_protmode = value; |
| * // NB: if not operating in 11g this can wait |
| * if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && |
| * IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan)) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_MCASTCIPHER: |
| * if ((vap->iv_caps & cipher2cap(value)) == 0 && |
| * !ieee80211_crypto_available(value)) |
| * return -EINVAL; |
| * rsn->rsn_mcastcipher = value; |
| * if (vap->iv_flags & IEEE80211_F_WPA) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_MCASTKEYLEN: |
| * if (!(0 < value && value < IEEE80211_KEYBUF_SIZE)) |
| * return -EINVAL; |
| * // XXX no way to verify driver capability |
| * rsn->rsn_mcastkeylen = value; |
| * if (vap->iv_flags & IEEE80211_F_WPA) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_UCASTCIPHERS: |
| * |
| * // Convert cipher set to equivalent capabilities. |
| * // NB: this logic intentionally ignores unknown and |
| * // unsupported ciphers so folks can specify 0xff or |
| * // similar and get all available ciphers. |
| * |
| * caps = 0; |
| * for (j = 1; j < 32; j++) // NB: skip WEP |
| * if ((value & (1<<j)) && |
| * ((vap->iv_caps & cipher2cap(j)) || |
| * ieee80211_crypto_available(j))) |
| * caps |= 1<<j; |
| * if (caps == 0) // nothing available |
| * return -EINVAL; |
| * // XXX verify ciphers ok for unicast use? |
| * // XXX disallow if running as it'll have no effect |
| * rsn->rsn_ucastcipherset = caps; |
| * if (vap->iv_flags & IEEE80211_F_WPA) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_UCASTCIPHER: |
| * if ((rsn->rsn_ucastcipherset & cipher2cap(value)) == 0) |
| * return -EINVAL; |
| * rsn->rsn_ucastcipher = value; |
| * break; |
| * case IEEE80211_PARAM_UCASTKEYLEN: |
| * if (!(0 < value && value < IEEE80211_KEYBUF_SIZE)) |
| * return -EINVAL; |
| * // XXX no way to verify driver capability |
| * rsn->rsn_ucastkeylen = value; |
| * break; |
| * case IEEE80211_PARAM_KEYMGTALGS: |
| * // XXX check |
| * rsn->rsn_keymgmtset = value; |
| * if (vap->iv_flags & IEEE80211_F_WPA) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_RSNCAPS: |
| * // XXX check |
| * rsn->rsn_caps = value; |
| * if (vap->iv_flags & IEEE80211_F_WPA) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_WPA: |
| * if (value > 3) |
| * return -EINVAL; |
| * // XXX verify ciphers available |
| * vap->iv_flags &= ~IEEE80211_F_WPA; |
| * switch (value) { |
| * case 1: |
| * vap->iv_flags |= IEEE80211_F_WPA1; |
| * break; |
| * case 2: |
| * vap->iv_flags |= IEEE80211_F_WPA2; |
| * break; |
| * case 3: |
| * vap->iv_flags |= IEEE80211_F_WPA1 | IEEE80211_F_WPA2; |
| * break; |
| * } |
| * retv = ENETRESET; // XXX? |
| * break; |
| * case IEEE80211_PARAM_ROAMING: |
| * if (!(IEEE80211_ROAMING_DEVICE <= value && |
| * value <= IEEE80211_ROAMING_MANUAL)) |
| * return -EINVAL; |
| * ic->ic_roaming = value; |
| * break; |
| * case IEEE80211_PARAM_PRIVACY: |
| * if (value) { |
| * // XXX check for key state? |
| * vap->iv_flags |= IEEE80211_F_PRIVACY; |
| * } else |
| * vap->iv_flags &= ~IEEE80211_F_PRIVACY; |
| * break; |
| * case IEEE80211_PARAM_DROPUNENCRYPTED: |
| * if (value) |
| * vap->iv_flags |= IEEE80211_F_DROPUNENC; |
| * else |
| * vap->iv_flags &= ~IEEE80211_F_DROPUNENC; |
| * break; |
| * case IEEE80211_PARAM_COUNTERMEASURES: |
| * if (value) { |
| * if ((vap->iv_flags & IEEE80211_F_WPA) == 0) |
| * return -EINVAL; |
| * vap->iv_flags |= IEEE80211_F_COUNTERM; |
| * } else |
| * vap->iv_flags &= ~IEEE80211_F_COUNTERM; |
| * break; |
| * case IEEE80211_PARAM_DRIVER_CAPS: |
| * vap->iv_caps = value; // NB: for testing |
| * break; |
| * case IEEE80211_PARAM_MACCMD: |
| * acl = vap->iv_acl; |
| * switch (value) { |
| * case IEEE80211_MACCMD_POLICY_OPEN: |
| * case IEEE80211_MACCMD_POLICY_ALLOW: |
| * case IEEE80211_MACCMD_POLICY_DENY: |
| * if (acl == NULL) { |
| * acl = ieee80211_aclator_get("mac"); |
| * if (acl == NULL || !acl->iac_attach(vap)) |
| * return -EINVAL; |
| * vap->iv_acl = acl; |
| * } |
| * acl->iac_setpolicy(vap, value); |
| * break; |
| * case IEEE80211_MACCMD_FLUSH: |
| * if (acl != NULL) |
| * acl->iac_flush(vap); |
| * // NB: silently ignore when not in use |
| * break; |
| * case IEEE80211_MACCMD_DETACH: |
| * if (acl != NULL) { |
| * vap->iv_acl = NULL; |
| * acl->iac_detach(vap); |
| * } |
| * break; |
| * } |
| * break; |
| * case IEEE80211_PARAM_WMM: |
| * if (ic->ic_caps & IEEE80211_C_WME){ |
| * if (value) { |
| * vap->iv_flags |= IEEE80211_F_WME; |
| * *//* XXX needed by ic_reset *//* |
| * vap->iv_ic->ic_flags |= IEEE80211_F_WME; |
| * } |
| * else { |
| * *//* XXX needed by ic_reset *//* |
| * vap->iv_flags &= ~IEEE80211_F_WME; |
| * vap->iv_ic->ic_flags &= ~IEEE80211_F_WME; |
| * } |
| * retv = ENETRESET; // Renegotiate for capabilities |
| * } |
| * break; |
| * case IEEE80211_PARAM_HIDESSID: |
| * if (value) |
| * vap->iv_flags |= IEEE80211_F_HIDESSID; |
| * else |
| * vap->iv_flags &= ~IEEE80211_F_HIDESSID; |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_APBRIDGE: |
| * if (value == 0) |
| * vap->iv_flags |= IEEE80211_F_NOBRIDGE; |
| * else |
| * vap->iv_flags &= ~IEEE80211_F_NOBRIDGE; |
| * break; |
| * case IEEE80211_PARAM_INACT: |
| * vap->iv_inact_run = value / IEEE80211_INACT_WAIT; |
| * break; |
| * case IEEE80211_PARAM_INACT_AUTH: |
| * vap->iv_inact_auth = value / IEEE80211_INACT_WAIT; |
| * break; |
| * case IEEE80211_PARAM_INACT_INIT: |
| * vap->iv_inact_init = value / IEEE80211_INACT_WAIT; |
| * break; |
| * case IEEE80211_PARAM_ABOLT: |
| * caps = 0; |
| * |
| * // Map abolt settings to capability bits; |
| * // this also strips unknown/unwanted bits. |
| * |
| * if (value & IEEE80211_ABOLT_TURBO_PRIME) |
| * caps |= IEEE80211_ATHC_TURBOP; |
| * if (value & IEEE80211_ABOLT_COMPRESSION) |
| * caps |= IEEE80211_ATHC_COMP; |
| * if (value & IEEE80211_ABOLT_FAST_FRAME) |
| * caps |= IEEE80211_ATHC_FF; |
| * if (value & IEEE80211_ABOLT_XR) |
| * caps |= IEEE80211_ATHC_XR; |
| * if (value & IEEE80211_ABOLT_AR) |
| * caps |= IEEE80211_ATHC_AR; |
| * if (value & IEEE80211_ABOLT_BURST) |
| * caps |= IEEE80211_ATHC_BURST; |
| * if (value & IEEE80211_ABOLT_WME_ELE) |
| * caps |= IEEE80211_ATHC_WME; |
| * // verify requested capabilities are supported |
| * if ((caps & ic->ic_ath_cap) != caps) |
| * return -EINVAL; |
| * if (vap->iv_ath_cap != caps) { |
| * if ((vap->iv_ath_cap ^ caps) & IEEE80211_ATHC_TURBOP) { |
| * if (ieee80211_set_turbo(dev, |
| * caps & IEEE80211_ATHC_TURBOP)) |
| * return -EINVAL; |
| * ieee80211_scan_flush(ic); |
| * } |
| * vap->iv_ath_cap = caps; |
| * ic->ic_athcapsetup(vap->iv_ic, vap->iv_ath_cap); |
| * retv = ENETRESET; |
| * } |
| * break; |
| * case IEEE80211_PARAM_DTIM_PERIOD: |
| * if (vap->iv_opmode != IEEE80211_M_HOSTAP && |
| * vap->iv_opmode != IEEE80211_M_IBSS) |
| * return -EINVAL; |
| * if (IEEE80211_DTIM_MIN <= value && |
| * value <= IEEE80211_DTIM_MAX) { |
| * vap->iv_dtim_period = value; |
| * retv = ENETRESET; // requires restart |
| * } else |
| * retv = EINVAL; |
| * break; |
| * case IEEE80211_PARAM_BEACON_INTERVAL: |
| * if (vap->iv_opmode != IEEE80211_M_HOSTAP && |
| * vap->iv_opmode != IEEE80211_M_IBSS) |
| * return -EINVAL; |
| * if (IEEE80211_BINTVAL_MIN <= value && |
| * value <= IEEE80211_BINTVAL_MAX) { |
| * ic->ic_lintval = value; // XXX multi-bss |
| * retv = ENETRESET; // requires restart |
| * } else |
| * retv = EINVAL; |
| * break; |
| * case IEEE80211_PARAM_DOTH: |
| * if (value) { |
| * ic->ic_flags |= IEEE80211_F_DOTH; |
| * } |
| * else |
| * ic->ic_flags &= ~IEEE80211_F_DOTH; |
| * retv = ENETRESET; // XXX: need something this drastic? |
| * break; |
| * case IEEE80211_PARAM_PWRTARGET: |
| * ic->ic_curchanmaxpwr = value; |
| * break; |
| * case IEEE80211_PARAM_GENREASSOC: |
| * IEEE80211_SEND_MGMT(vap->iv_bss, |
| * IEEE80211_FC0_SUBTYPE_REASSOC_REQ, 0); |
| * break; |
| * case IEEE80211_PARAM_COMPRESSION: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_COMP, value); |
| * break; |
| * case IEEE80211_PARAM_WMM_AGGRMODE: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_WME, value); |
| * break; |
| * case IEEE80211_PARAM_FF: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_FF, value); |
| * break; |
| * case IEEE80211_PARAM_TURBO: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_TURBOP, value); |
| * if (retv == ENETRESET) { |
| * if(ieee80211_set_turbo(dev,value)) |
| * return -EINVAL; |
| * ieee80211_scan_flush(ic); |
| * } |
| * break; |
| * case IEEE80211_PARAM_XR: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_XR, value); |
| * break; |
| * case IEEE80211_PARAM_BURST: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_BURST, value); |
| * break; |
| * case IEEE80211_PARAM_AR: |
| * retv = ieee80211_setathcap(vap, IEEE80211_ATHC_AR, value); |
| * break; |
| * case IEEE80211_PARAM_PUREG: |
| * if (value) |
| * vap->iv_flags |= IEEE80211_F_PUREG; |
| * else |
| * vap->iv_flags &= ~IEEE80211_F_PUREG; |
| * // NB: reset only if we're operating on an 11g channel |
| * if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && |
| * IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan)) |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_WDS: |
| * if (value) |
| * vap->iv_flags_ext |= IEEE80211_FEXT_WDS; |
| * else |
| * vap->iv_flags_ext &= ~IEEE80211_FEXT_WDS; |
| * break; |
| * case IEEE80211_PARAM_BGSCAN: |
| * if (value) { |
| * if ((vap->iv_caps & IEEE80211_C_BGSCAN) == 0) |
| * return -EINVAL; |
| * vap->iv_flags |= IEEE80211_F_BGSCAN; |
| * } else { |
| * // XXX racey? |
| * vap->iv_flags &= ~IEEE80211_F_BGSCAN; |
| * ieee80211_cancel_scan(vap); // anything current |
| * } |
| * break; |
| * case IEEE80211_PARAM_BGSCAN_IDLE: |
| * if (value >= IEEE80211_BGSCAN_IDLE_MIN) |
| * vap->iv_bgscanidle = value*HZ/1000; |
| * else |
| * retv = EINVAL; |
| * break; |
| * case IEEE80211_PARAM_BGSCAN_INTERVAL: |
| * if (value >= IEEE80211_BGSCAN_INTVAL_MIN) |
| * vap->iv_bgscanintvl = value*HZ; |
| * else |
| * retv = EINVAL; |
| * break; |
| * case IEEE80211_PARAM_MCAST_RATE: |
| * // units are in KILObits per second |
| * if (value >= 256 && value <= 54000) |
| * vap->iv_mcast_rate = value; |
| * else |
| * retv = EINVAL; |
| * break; |
| * case IEEE80211_PARAM_COVERAGE_CLASS: |
| * if (value >= 0 && value <= IEEE80211_COVERAGE_CLASS_MAX) { |
| * ic->ic_coverageclass = value; |
| * if (IS_UP_AUTO(vap)) |
| * ieee80211_new_state(vap, IEEE80211_S_SCAN, 0); |
| * retv = 0; |
| * } |
| * else |
| * retv = EINVAL; |
| * break; |
| * case IEEE80211_PARAM_COUNTRY_IE: |
| * if (value) |
| * ic->ic_flags_ext |= IEEE80211_FEXT_COUNTRYIE; |
| * else |
| * ic->ic_flags_ext &= ~IEEE80211_FEXT_COUNTRYIE; |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_REGCLASS: |
| * if (value) |
| * ic->ic_flags_ext |= IEEE80211_FEXT_REGCLASS; |
| * else |
| * ic->ic_flags_ext &= ~IEEE80211_FEXT_REGCLASS; |
| * retv = ENETRESET; |
| * break; |
| * case IEEE80211_PARAM_SCANVALID: |
| * vap->iv_scanvalid = value*HZ; |
| * break; |
| * case IEEE80211_PARAM_ROAM_RSSI_11A: |
| * vap->iv_roam.rssi11a = value; |
| * break; |
| * case IEEE80211_PARAM_ROAM_RSSI_11B: |
| * vap->iv_roam.rssi11bOnly = value; |
| * break; |
| * case IEEE80211_PARAM_ROAM_RSSI_11G: |
| * vap->iv_roam.rssi11b = value; |
| * break; |
| * case IEEE80211_PARAM_ROAM_RATE_11A: |
| * vap->iv_roam.rate11a = value; |
| * break; |
| * case IEEE80211_PARAM_ROAM_RATE_11B: |
| * vap->iv_roam.rate11bOnly = value; |
| * break; |
| * case IEEE80211_PARAM_ROAM_RATE_11G: |
| * vap->iv_roam.rate11b = value; |
| * break; |
| * case IEEE80211_PARAM_UAPSDINFO: |
| * if (vap->iv_opmode == IEEE80211_M_HOSTAP) { |
| * if (ic->ic_caps & IEEE80211_C_UAPSD) { |
| * if (value) |
| * IEEE80211_VAP_UAPSD_ENABLE(vap); |
| * else |
| * IEEE80211_VAP_UAPSD_DISABLE(vap); |
| * retv = ENETRESET; |
| * } |
| * } |
| * else if (vap->iv_opmode == IEEE80211_M_STA) { |
| * vap->iv_uapsdinfo = value; |
| * IEEE80211_VAP_UAPSD_ENABLE(vap); |
| * retv = ENETRESET; |
| * } |
| * break; |
| * case IEEE80211_PARAM_SLEEP: |
| * // XXX: Forced sleep for testing. Does not actually place the |
| * // HW in sleep mode yet. this only makes sense for STAs. |
| * |
| * if (value) { |
| * // goto sleep |
| * IEEE80211_VAP_GOTOSLEEP(vap); |
| * } |
| * else { |
| * // wakeup |
| * IEEE80211_VAP_WAKEUP(vap); |
| * } |
| * ieee80211_send_nulldata(ieee80211_ref_node(vap->iv_bss)); |
| * break; |
| * case IEEE80211_PARAM_QOSNULL: |
| * // Force a QoS Null for testing. |
| * ieee80211_send_qosnulldata(vap->iv_bss, value); |
| * break; |
| * case IEEE80211_PARAM_PSPOLL: |
| * // Force a PS-POLL for testing. |
| * ieee80211_send_pspoll(vap->iv_bss); |
| * break; |
| * case IEEE80211_PARAM_EOSPDROP: |
| * if (vap->iv_opmode == IEEE80211_M_HOSTAP) { |
| * if (value) IEEE80211_VAP_EOSPDROP_ENABLE(vap); |
| * else IEEE80211_VAP_EOSPDROP_DISABLE(vap); |
| * } |
| * break; |
| * case IEEE80211_PARAM_MARKDFS: |
| * if (value) |
| * ic->ic_flags_ext |= IEEE80211_FEXT_MARKDFS; |
| * else |
| * ic->ic_flags_ext &= ~IEEE80211_FEXT_MARKDFS; |
| * break; |
| * case IEEE80211_PARAM_CHANBW: |
| * switch (value) { |
| * case 0: |
| * ic->ic_chanbwflag = 0; |
| * break; |
| * case 1: |
| * ic->ic_chanbwflag = IEEE80211_CHAN_HALF; |
| * break; |
| * case 2: |
| * ic->ic_chanbwflag = IEEE80211_CHAN_QUARTER; |
| * break; |
| * default: |
| * retv = EINVAL; |
| * break; |
| * } |
| * break; |
| * case IEEE80211_PARAM_SHORTPREAMBLE: |
| * if (value) { |
| * ic->ic_caps |= IEEE80211_C_SHPREAMBLE; |
| * } else { |
| * ic->ic_caps &= ~IEEE80211_C_SHPREAMBLE; |
| * } |
| * retv = ENETRESET; |
| * break; |
| * default: |
| * retv = EOPNOTSUPP; |
| * break; |
| * } |
| * // XXX should any of these cause a rescan? |
| * if (retv == ENETRESET) |
| * retv = IS_UP_AUTO(vap) ? ieee80211_open(vap->iv_dev) : 0; |
| * return -retv; |
| *} |
| */ |
| |
| int usbdrvwext_setmode(struct net_device *dev, struct iw_request_info *info, |
| void *w, char *extra) |
| { |
| return 0; |
| } |
| |
| int usbdrvwext_getmode(struct net_device *dev, struct iw_request_info *info, |
| void *w, char *extra) |
| { |
| /* struct usbdrv_private *macp = dev->ml_priv; */ |
| struct iw_point *wri = (struct iw_point *)extra; |
| char mode[8]; |
| |
| strcpy(mode, "11g"); |
| return copy_to_user(wri->pointer, mode, 6) ? -EFAULT : 0; |
| } |
| |
| int zfLnxPrivateIoctl(struct net_device *dev, struct zdap_ioctl* zdreq) |
| { |
| /* void* regp = macp->regp; */ |
| u16_t cmd; |
| /* u32_t temp; */ |
| u32_t *p; |
| u32_t i; |
| |
| cmd = zdreq->cmd; |
| switch (cmd) { |
| case ZM_IOCTL_REG_READ: |
| zfiDbgReadReg(dev, zdreq->addr); |
| break; |
| case ZM_IOCTL_REG_WRITE: |
| zfiDbgWriteReg(dev, zdreq->addr, zdreq->value); |
| break; |
| case ZM_IOCTL_MEM_READ: |
| p = (u32_t *) bus_to_virt(zdreq->addr); |
| printk(KERN_WARNING |
| "usbdrv: read memory addr: 0x%08x value:" |
| " 0x%08x\n", zdreq->addr, *p); |
| break; |
| case ZM_IOCTL_MEM_WRITE: |
| p = (u32_t *) bus_to_virt(zdreq->addr); |
| *p = zdreq->value; |
| printk(KERN_WARNING |
| "usbdrv : write value : 0x%08x to memory addr :" |
| " 0x%08x\n", zdreq->value, zdreq->addr); |
| break; |
| case ZM_IOCTL_TALLY: |
| zfiWlanShowTally(dev); |
| if (zdreq->addr) |
| zfiWlanResetTally(dev); |
| break; |
| case ZM_IOCTL_TEST: |
| printk(KERN_WARNING |
| "ZM_IOCTL_TEST:len=%d\n", zdreq->addr); |
| /* zfiWlanReadReg(dev, 0x10f400); */ |
| /* zfiWlanReadReg(dev, 0x10f404); */ |
| printk(KERN_WARNING "IOCTL TEST\n"); |
| #if 1 |
| /* print packet */ |
| for (i = 0; i < zdreq->addr; i++) { |
| if ((i&0x7) == 0) |
| printk(KERN_WARNING "\n"); |
| printk(KERN_WARNING "%02X ", |
| (unsigned char)zdreq->data[i]); |
| } |
| printk(KERN_WARNING "\n"); |
| #endif |
| |
| /* For Test?? 1 to 0 by CWYang(-) */ |
| #if 0 |
| struct sk_buff *s; |
| |
| /* Allocate a skb */ |
| s = alloc_skb(2000, GFP_ATOMIC); |
| |
| /* Copy data to skb */ |
| for (i = 0; i < zdreq->addr; i++) |
| s->data[i] = zdreq->data[i]; |
| s->len = zdreq->addr; |
| |
| /* Call zfIdlRecv() */ |
| zfiRecv80211(dev, s, NULL); |
| #endif |
| break; |
| /************************* ZDCONFIG ***************************/ |
| case ZM_IOCTL_FRAG: |
| zfiWlanSetFragThreshold(dev, zdreq->addr); |
| break; |
| case ZM_IOCTL_RTS: |
| zfiWlanSetRtsThreshold(dev, zdreq->addr); |
| break; |
| case ZM_IOCTL_SCAN: |
| zfiWlanScan(dev); |
| break; |
| case ZM_IOCTL_KEY: { |
| u8_t key[29]; |
| struct zsKeyInfo keyInfo; |
| u32_t i; |
| |
| for (i = 0; i < 29; i++) |
| key[i] = 0; |
| |
| for (i = 0; i < zdreq->addr; i++) |
| key[i] = zdreq->data[i]; |
| |
| printk(KERN_WARNING |
| "key len=%d, key=%02x%02x%02x%02x%02x...\n", |
| zdreq->addr, key[0], key[1], key[2], key[3], key[4]); |
| |
| keyInfo.keyLength = zdreq->addr; |
| keyInfo.keyIndex = 0; |
| keyInfo.flag = 0; |
| keyInfo.key = key; |
| zfiWlanSetKey(dev, keyInfo); |
| } |
| break; |
| case ZM_IOCTL_RATE: |
| zfiWlanSetTxRate(dev, zdreq->addr); |
| break; |
| case ZM_IOCTL_ENCRYPTION_MODE: |
| zfiWlanSetEncryMode(dev, zdreq->addr); |
| |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| break; |
| /* CWYang(+) */ |
| case ZM_IOCTL_SIGNAL_STRENGTH: { |
| u8_t buffer[2]; |
| zfiWlanQuerySignalInfo(dev, &buffer[0]); |
| printk(KERN_WARNING |
| "Current Signal Strength : %02d\n", buffer[0]); |
| } |
| break; |
| /* CWYang(+) */ |
| case ZM_IOCTL_SIGNAL_QUALITY: { |
| u8_t buffer[2]; |
| zfiWlanQuerySignalInfo(dev, &buffer[0]); |
| printk(KERN_WARNING |
| "Current Signal Quality : %02d\n", buffer[1]); |
| } |
| break; |
| case ZM_IOCTL_SET_PIBSS_MODE: |
| if (zdreq->addr == 1) |
| zfiWlanSetWlanMode(dev, ZM_MODE_PSEUDO); |
| else |
| zfiWlanSetWlanMode(dev, ZM_MODE_INFRASTRUCTURE); |
| |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| break; |
| /********************* ZDCONFIG ***********************/ |
| default: |
| printk(KERN_ERR "usbdrv: error command = %x\n", cmd); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int usbdrv_wpa_ioctl(struct net_device *dev, struct athr_wlan_param *zdparm) |
| { |
| int ret = 0; |
| u8_t bc_addr[6] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| u8_t mac_addr[80]; |
| struct zsKeyInfo keyInfo; |
| struct usbdrv_private *macp = dev->ml_priv; |
| u16_t vapId = 0; |
| int ii; |
| |
| /* zmw_get_wlan_dev(dev); */ |
| |
| switch (zdparm->cmd) { |
| case ZD_CMD_SET_ENCRYPT_KEY: |
| /* Set up key information */ |
| keyInfo.keyLength = zdparm->u.crypt.key_len; |
| keyInfo.keyIndex = zdparm->u.crypt.idx; |
| if (zfiWlanQueryWlanMode(dev) == ZM_MODE_AP) { |
| /* AP Mode */ |
| keyInfo.flag = ZM_KEY_FLAG_AUTHENTICATOR; |
| } else |
| keyInfo.flag = 0; |
| keyInfo.key = zdparm->u.crypt.key; |
| keyInfo.initIv = zdparm->u.crypt.seq; |
| keyInfo.macAddr = (u16_t *)zdparm->sta_addr; |
| |
| /* Identify the MAC address information */ |
| if (memcmp(zdparm->sta_addr, bc_addr, sizeof(bc_addr)) == 0) |
| keyInfo.flag |= ZM_KEY_FLAG_GK; |
| else |
| keyInfo.flag |= ZM_KEY_FLAG_PK; |
| |
| if (!strcmp(zdparm->u.crypt.alg, "NONE")) { |
| /* u8_t zero_mac[]={0,0,0,0,0,0}; */ |
| |
| /* Set key length to zero */ |
| keyInfo.keyLength = 0; |
| |
| /* del group key */ |
| if (zdparm->sta_addr[0] & 1) { |
| /* if (macp->cardSetting.WPAIeLen==0) |
| * { 802.1x dynamic WEP |
| * mDynKeyMode = 0; |
| * mKeyFormat[0] = 0; |
| * mPrivacyInvoked[0]=FALSE; |
| * mCap[0] &= ~CAP_PRIVACY; |
| * macp->cardSetting.EncryOnOff[0]=0; |
| * } |
| * mWpaBcKeyLen = mGkInstalled = 0; |
| */ |
| } else { |
| /* if (memcmp(zero_mac,zdparm->sta_addr, 6)==0) |
| * { |
| * mDynKeyMode=0; |
| * mKeyFormat[0]=0; |
| * pSetting->DynKeyMode=0; |
| * pSetting->EncryMode[0]=0; |
| * mDynKeyMode=0; |
| * } |
| */ |
| } |
| |
| printk(KERN_ERR "Set Encryption Type NONE\n"); |
| return ret; |
| } else if (!strcmp(zdparm->u.crypt.alg, "TKIP")) { |
| zfiWlanSetEncryMode(dev, ZM_TKIP); |
| /* //Linux Supplicant will inverse Tx/Rx key |
| * //So we inverse it back, CWYang(+) |
| * zfMemoryCopy(&temp[0], &keyInfo.key[16], 8); |
| * zfMemoryCopy(&keyInfo.key[16], keyInfo.key[24], 8); |
| * zfMemoryCopy(&keyInfo.key[24], &temp[0], 8); |
| * u8_t temp; |
| * int k; |
| * for (k = 0; k < 8; k++) |
| * { |
| * temp = keyInfo.key[16 + k]; |
| * keyInfo.key[16 + k] = keyInfo.key[24 + k]; |
| * keyInfo.key[24 + k] = temp; |
| * } |
| * CamEncryType = ZM_TKIP; |
| * if (idx == 0) |
| * { // Pairwise key |
| * mKeyFormat[0] = CamEncryType; |
| * mDynKeyMode = pSetting->DynKeyMode = DYN_KEY_TKIP; |
| * } |
| */ |
| } else if (!strcmp(zdparm->u.crypt.alg, "CCMP")) { |
| zfiWlanSetEncryMode(dev, ZM_AES); |
| /* CamEncryType = ZM_AES; |
| * if (idx == 0) |
| * { // Pairwise key |
| * mKeyFormat[0] = CamEncryType; |
| * mDynKeyMode = pSetting->DynKeyMode = DYN_KEY_AES; |
| * } |
| */ |
| } else if (!strcmp(zdparm->u.crypt.alg, "WEP")) { |
| if (keyInfo.keyLength == 5) { |
| /* WEP 64 */ |
| zfiWlanSetEncryMode(dev, ZM_WEP64); |
| /* CamEncryType = ZM_WEP64; */ |
| /* tmpDynKeyMode=DYN_KEY_WEP64; */ |
| } else if (keyInfo.keyLength == 13) { |
| /* keylen=13, WEP 128 */ |
| zfiWlanSetEncryMode(dev, ZM_WEP128); |
| /* CamEncryType = ZM_WEP128; */ |
| /* tmpDynKeyMode=DYN_KEY_WEP128; */ |
| } else { |
| zfiWlanSetEncryMode(dev, ZM_WEP256); |
| } |
| |
| /* For Dynamic WEP key (Non-WPA Radius), the key ID range: 0-3 |
| * In WPA/RSN mode, the key ID range: 1-3, usually, a broadcast key. |
| * For WEP key setting: we set mDynKeyMode and mKeyFormat in following |
| * case: |
| * 1. For 802.1x dynamically generated WEP key method. |
| * 2. For WPA/RSN mode, but key id == 0. |
| * (But this is an impossible case) |
| * So, only check case 1. |
| * if (macp->cardSetting.WPAIeLen==0) |
| * { |
| * mKeyFormat[0] = CamEncryType; |
| * mDynKeyMode = pSetting->DynKeyMode = tmpDynKeyMode; |
| * mPrivacyInvoked[0]=TRUE; |
| * mCap[0] |= CAP_PRIVACY; |
| * macp->cardSetting.EncryOnOff[0]=1; |
| * } |
| */ |
| } |
| |
| /* DUMP key context */ |
| /* #ifdef WPA_DEBUG */ |
| if (keyInfo.keyLength > 0) { |
| printk(KERN_WARNING |
| "Otus: Key Context:\n"); |
| for (ii = 0; ii < keyInfo.keyLength; ) { |
| printk(KERN_WARNING |
| "0x%02x ", keyInfo.key[ii]); |
| if ((++ii % 16) == 0) |
| printk(KERN_WARNING "\n"); |
| } |
| printk(KERN_WARNING "\n"); |
| } |
| /* #endif */ |
| |
| /* Set encrypt mode */ |
| /* zfiWlanSetEncryMode(dev, CamEncryType); */ |
| vapId = zfLnxGetVapId(dev); |
| if (vapId == 0xffff) |
| keyInfo.vapId = 0; |
| else |
| keyInfo.vapId = vapId + 1; |
| keyInfo.vapAddr[0] = keyInfo.macAddr[0]; |
| keyInfo.vapAddr[1] = keyInfo.macAddr[1]; |
| keyInfo.vapAddr[2] = keyInfo.macAddr[2]; |
| |
| zfiWlanSetKey(dev, keyInfo); |
| |
| /* zfiWlanDisable(dev); */ |
| /* zfiWlanEnable(dev); */ |
| break; |
| case ZD_CMD_SET_MLME: |
| printk(KERN_ERR "usbdrv_wpa_ioctl: ZD_CMD_SET_MLME\n"); |
| |
| /* Translate STA's address */ |
| sprintf(mac_addr, "%02x:%02x:%02x:%02x:%02x:%02x", |
| zdparm->sta_addr[0], zdparm->sta_addr[1], |
| zdparm->sta_addr[2], zdparm->sta_addr[3], |
| zdparm->sta_addr[4], zdparm->sta_addr[5]); |
| |
| switch (zdparm->u.mlme.cmd) { |
| case MLME_STA_DEAUTH: |
| printk(KERN_WARNING |
| " -------Call zfiWlanDeauth, reason:%d\n", |
| zdparm->u.mlme.reason_code); |
| if (zfiWlanDeauth(dev, (u16_t *) zdparm->sta_addr, |
| zdparm->u.mlme.reason_code) != 0) |
| printk(KERN_ERR "Can't deauthencate STA: %s\n", |
| mac_addr); |
| else |
| printk(KERN_ERR "Deauthenticate STA: %s" |
| "with reason code: %d\n", |
| mac_addr, zdparm->u.mlme.reason_code); |
| break; |
| case MLME_STA_DISASSOC: |
| printk(KERN_WARNING |
| " -------Call zfiWlanDeauth, reason:%d\n", |
| zdparm->u.mlme.reason_code); |
| if (zfiWlanDeauth(dev, (u16_t *) zdparm->sta_addr, |
| zdparm->u.mlme.reason_code) != 0) |
| printk(KERN_ERR "Can't disassociate STA: %s\n", |
| mac_addr); |
| else |
| printk(KERN_ERR "Disassociate STA: %s" |
| "with reason code: %d\n", |
| mac_addr, zdparm->u.mlme.reason_code); |
| break; |
| default: |
| printk(KERN_ERR "MLME command: 0x%04x not support\n", |
| zdparm->u.mlme.cmd); |
| break; |
| } |
| |
| break; |
| case ZD_CMD_SCAN_REQ: |
| printk(KERN_ERR "usbdrv_wpa_ioctl: ZD_CMD_SCAN_REQ\n"); |
| break; |
| case ZD_CMD_SET_GENERIC_ELEMENT: { |
| u8_t len, *wpaie; |
| printk(KERN_ERR "usbdrv_wpa_ioctl:" |
| " ZD_CMD_SET_GENERIC_ELEMENT\n"); |
| |
| /* Copy the WPA IE |
| * zm_msg1_mm(ZM_LV_0, "CWY - wpaie Length : ", |
| * zdparm->u.generic_elem.len); |
| */ |
| printk(KERN_ERR "wpaie Length : % d\n", |
| zdparm->u.generic_elem.len); |
| if (zfiWlanQueryWlanMode(dev) == ZM_MODE_AP) { |
| /* AP Mode */ |
| zfiWlanSetWpaIe(dev, zdparm->u.generic_elem.data, |
| zdparm->u.generic_elem.len); |
| } else { |
| macp->supLen = zdparm->u.generic_elem.len; |
| memcpy(macp->supIe, zdparm->u.generic_elem.data, |
| zdparm->u.generic_elem.len); |
| } |
| zfiWlanSetWpaSupport(dev, 1); |
| /* zfiWlanSetWpaIe(dev, zdparm->u.generic_elem.data, |
| * zdparm->u.generic_elem.len); |
| */ |
| len = zdparm->u.generic_elem.len; |
| wpaie = zdparm->u.generic_elem.data; |
| |
| printk(KERN_ERR "wd->ap.wpaLen : % d\n", len); |
| |
| /* DUMP WPA IE */ |
| for(ii = 0; ii < len;) { |
| printk(KERN_ERR "0x%02x ", wpaie[ii]); |
| |
| if((++ii % 16) == 0) |
| printk(KERN_ERR "\n"); |
| } |
| printk(KERN_ERR "\n"); |
| |
| /* #ifdef ZM_HOSTAPD_SUPPORT |
| * if (wd->wlanMode == ZM_MODE_AP) |
| * {// Update Beacon FIFO in the next TBTT. |
| * memcpy(&mWPAIe, pSetting->WPAIe, pSetting->WPAIeLen); |
| * printk(KERN_ERR "Copy WPA IE into mWPAIe\n"); |
| * } |
| * #endif |
| */ |
| break; |
| } |
| |
| /* #ifdef ZM_HOSTAPD_SUPPORT */ |
| case ZD_CMD_GET_TSC: |
| printk(KERN_ERR "usbdrv_wpa_ioctl : ZD_CMD_GET_TSC\n"); |
| break; |
| /* #endif */ |
| |
| default: |
| printk(KERN_ERR "usbdrv_wpa_ioctl default : 0x%04x\n", |
| zdparm->cmd); |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| #ifdef ZM_ENABLE_CENC |
| int usbdrv_cenc_ioctl(struct net_device *dev, struct zydas_cenc_param *zdparm) |
| { |
| /* struct usbdrv_private *macp = dev->ml_priv; */ |
| struct zsKeyInfo keyInfo; |
| u16_t apId; |
| u8_t bc_addr[6] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| int ret = 0; |
| int ii; |
| |
| /* Get the AP Id */ |
| apId = zfLnxGetVapId(dev); |
| |
| if (apId == 0xffff) { |
| apId = 0; |
| } else { |
| apId = apId + 1; |
| } |
| |
| switch (zdparm->cmd) { |
| case ZM_CMD_CENC_SETCENC: |
| printk(KERN_ERR "ZM_CMD_CENC_SETCENC\n"); |
| printk(KERN_ERR "length : % d\n", zdparm->len); |
| printk(KERN_ERR "policy : % d\n", zdparm->u.info.cenc_policy); |
| break; |
| case ZM_CMD_CENC_SETKEY: |
| /* ret = wai_ioctl_setkey(vap, ioctl_msg); */ |
| printk(KERN_ERR "ZM_CMD_CENC_SETKEY\n"); |
| |
| printk(KERN_ERR "MAC address = "); |
| for (ii = 0; ii < 6; ii++) { |
| printk(KERN_ERR "0x%02x ", |
| zdparm->u.crypt.sta_addr[ii]); |
| } |
| printk(KERN_ERR "\n"); |
| |
| printk(KERN_ERR "Key Index : % d\n", zdparm->u.crypt.keyid); |
| printk(KERN_ERR "Encryption key = "); |
| for (ii = 0; ii < 16; ii++) { |
| printk(KERN_ERR "0x%02x ", zdparm->u.crypt.key[ii]); |
| } |
| printk(KERN_ERR "\n"); |
| |
| printk(KERN_ERR "MIC key = "); |
| for(ii = 16; ii < ZM_CENC_KEY_SIZE; ii++) { |
| printk(KERN_ERR "0x%02x ", zdparm->u.crypt.key[ii]); |
| } |
| printk(KERN_ERR "\n"); |
| |
| /* Set up key information */ |
| keyInfo.keyLength = ZM_CENC_KEY_SIZE; |
| keyInfo.keyIndex = zdparm->u.crypt.keyid; |
| keyInfo.flag = ZM_KEY_FLAG_AUTHENTICATOR | ZM_KEY_FLAG_CENC; |
| keyInfo.key = zdparm->u.crypt.key; |
| keyInfo.macAddr = (u16_t *)zdparm->u.crypt.sta_addr; |
| |
| /* Identify the MAC address information */ |
| if (memcmp(zdparm->u.crypt.sta_addr, bc_addr, |
| sizeof(bc_addr)) == 0) { |
| keyInfo.flag |= ZM_KEY_FLAG_GK; |
| keyInfo.vapId = apId; |
| memcpy(keyInfo.vapAddr, dev->dev_addr, ETH_ALEN); |
| } else { |
| keyInfo.flag |= ZM_KEY_FLAG_PK; |
| } |
| |
| zfiWlanSetKey(dev, keyInfo); |
| |
| break; |
| case ZM_CMD_CENC_REKEY: |
| /* ret = wai_ioctl_rekey(vap, ioctl_msg); */ |
| printk(KERN_ERR "ZM_CMD_CENC_REKEY\n"); |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| /* if (retv == ENETRESET) */ |
| /* retv = IS_UP_AUTO(vap) ? ieee80211_open(vap->iv_dev) : 0; */ |
| |
| return ret; |
| } |
| #endif /* ZM_ENABLE_CENC */ |
| |
| int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| /* struct usbdrv_private *macp; */ |
| /* void *regp; */ |
| struct zdap_ioctl zdreq; |
| struct iwreq *wrq = (struct iwreq *)ifr; |
| struct athr_wlan_param zdparm; |
| struct usbdrv_private *macp = dev->ml_priv; |
| |
| int err = 0, val = 0; |
| int changed = 0; |
| |
| /* regp = macp->regp; */ |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case SIOCGIWNAME: |
| strcpy(wrq->u.name, "IEEE 802.11-DS"); |
| break; |
| case SIOCGIWAP: |
| err = usbdrvwext_giwap(dev, NULL, &wrq->u.ap_addr, NULL); |
| break; |
| case SIOCSIWAP: |
| err = usbdrvwext_siwap(dev, NULL, &wrq->u.ap_addr, NULL); |
| break; |
| case SIOCGIWMODE: |
| err = usbdrvwext_giwmode(dev, NULL, &wrq->u.mode, NULL); |
| break; |
| case SIOCSIWESSID: |
| printk(KERN_ERR "CWY - usbdrvwext_siwessid\n"); |
| /* err = usbdrv_ioctl_setessid(dev, &wrq->u.essid); */ |
| err = usbdrvwext_siwessid(dev, NULL, &wrq->u.essid, NULL); |
| |
| if (!err) |
| changed = 1; |
| break; |
| case SIOCGIWESSID: |
| err = usbdrvwext_giwessid(dev, NULL, &wrq->u.essid, NULL); |
| break; |
| case SIOCSIWRTS: |
| err = usbdrv_ioctl_setrts(dev, &wrq->u.rts); |
| if (! err) |
| changed = 1; |
| break; |
| /* set_auth */ |
| case SIOCIWFIRSTPRIV + 0x2: { |
| /* printk("CWY - SIOCIWFIRSTPRIV + 0x2(set_auth)\n"); */ |
| if (!capable(CAP_NET_ADMIN)) { |
| err = -EPERM; |
| break; |
| } |
| val = *((int *) wrq->u.name); |
| if ((val < 0) || (val > 2)) { |
| err = -EINVAL; |
| break; |
| } else { |
| zfiWlanSetAuthenticationMode(dev, val); |
| |
| if (macp->DeviceOpened == 1) { |
| zfiWlanDisable(dev, 0); |
| zfiWlanEnable(dev); |
| } |
| |
| err = 0; |
| changed = 1; |
| } |
| } |
| break; |
| /* get_auth */ |
| case SIOCIWFIRSTPRIV + 0x3: { |
| int AuthMode = ZM_AUTH_MODE_OPEN; |
| |
| /* printk("CWY - SIOCIWFIRSTPRIV + 0x3(get_auth)\n"); */ |
| |
| if (wrq->u.data.pointer) { |
| wrq->u.data.flags = 1; |
| |
| AuthMode = zfiWlanQueryAuthenticationMode(dev, 0); |
| if (AuthMode == ZM_AUTH_MODE_OPEN) { |
| wrq->u.data.length = 12; |
| |
| if (copy_to_user(wrq->u.data.pointer, |
| "open system", 12)) { |
| return -EFAULT; |
| } |
| } else if (AuthMode == ZM_AUTH_MODE_SHARED_KEY) { |
| wrq->u.data.length = 11; |
| |
| if (copy_to_user(wrq->u.data.pointer, |
| "shared key", 11)) { |
| return -EFAULT; |
| } |
| } else if (AuthMode == ZM_AUTH_MODE_AUTO) { |
| wrq->u.data.length = 10; |
| |
| if (copy_to_user(wrq->u.data.pointer, |
| "auto mode", 10)) { |
| return -EFAULT; |
| } |
| } else { |
| return -EFAULT; |
| } |
| } |
| } |
| break; |
| /* debug command */ |
| case ZDAPIOCTL: |
| if (copy_from_user(&zdreq, ifr->ifr_data, sizeof(zdreq))) { |
| printk(KERN_ERR "usbdrv : copy_from_user error\n"); |
| return -EFAULT; |
| } |
| |
| /* printk(KERN_WARNING |
| * "usbdrv : cmd = % 2x, reg = 0x%04lx, |
| *value = 0x%08lx\n", |
| * zdreq.cmd, zdreq.addr, zdreq.value); |
| */ |
| zfLnxPrivateIoctl(dev, &zdreq); |
| |
| err = 0; |
| break; |
| case ZD_IOCTL_WPA: |
| if (copy_from_user(&zdparm, ifr->ifr_data, |
| sizeof(struct athr_wlan_param))) { |
| printk(KERN_ERR "usbdrv : copy_from_user error\n"); |
| return -EFAULT; |
| } |
| |
| usbdrv_wpa_ioctl(dev, &zdparm); |
| err = 0; |
| break; |
| case ZD_IOCTL_PARAM: { |
| int *p; |
| int op; |
| int arg; |
| |
| /* Point to the name field and retrieve the |
| * op and arg elements. |
| */ |
| p = (int *)wrq->u.name; |
| op = *p++; |
| arg = *p; |
| |
| if (op == ZD_PARAM_ROAMING) { |
| printk(KERN_ERR |
| "*************ZD_PARAM_ROAMING : % d\n", arg); |
| /* macp->cardSetting.ap_scan=(U8)arg; */ |
| } |
| if (op == ZD_PARAM_PRIVACY) { |
| printk(KERN_ERR "ZD_IOCTL_PRIVACY : "); |
| |
| /* Turn on the privacy invoke flag */ |
| if (arg) { |
| /* mCap[0] |= CAP_PRIVACY; */ |
| /* macp->cardSetting.EncryOnOff[0] = 1; */ |
| printk(KERN_ERR "enable\n"); |
| |
| } else { |
| /* mCap[0] &= ~CAP_PRIVACY; */ |
| /* macp->cardSetting.EncryOnOff[0] = 0; */ |
| printk(KERN_ERR "disable\n"); |
| } |
| /* changed=1; */ |
| } |
| if (op == ZD_PARAM_WPA) { |
| |
| printk(KERN_ERR "ZD_PARAM_WPA : "); |
| |
| if (arg) { |
| printk(KERN_ERR "enable\n"); |
| |
| if (zfiWlanQueryWlanMode(dev) != ZM_MODE_AP) { |
| printk(KERN_ERR "Station Mode\n"); |
| /* zfiWlanQueryWpaIe(dev, (u8_t *) |
| &wpaIe, &wpalen); */ |
| /* printk("wpaIe : % 2x, % 2x, % 2x\n", |
| wpaIe[21], wpaIe[22], wpaIe[23]); */ |
| /* printk("rsnIe : % 2x, % 2x, % 2x\n", |
| wpaIe[17], wpaIe[18], wpaIe[19]); */ |
| if ((macp->supIe[21] == 0x50) && |
| (macp->supIe[22] == 0xf2) && |
| (macp->supIe[23] == 0x2)) { |
| printk(KERN_ERR |
| "wd->sta.authMode = ZM_AUTH_MODE_WPAPSK\n"); |
| /* wd->sta.authMode = ZM_AUTH_MODE_WPAPSK; */ |
| /* wd->ws.authMode = ZM_AUTH_MODE_WPAPSK; */ |
| zfiWlanSetAuthenticationMode(dev, |
| ZM_AUTH_MODE_WPAPSK); |
| } else if ((macp->supIe[21] == 0x50) && |
| (macp->supIe[22] == 0xf2) && |
| (macp->supIe[23] == 0x1)) { |
| printk(KERN_ERR |
| "wd->sta.authMode = ZM_AUTH_MODE_WPA\n"); |
| /* wd->sta.authMode = ZM_AUTH_MODE_WPA; */ |
| /* wd->ws.authMode = ZM_AUTH_MODE_WPA; */ |
| zfiWlanSetAuthenticationMode(dev, |
| ZM_AUTH_MODE_WPA); |
| } else if ((macp->supIe[17] == 0xf) && |
| (macp->supIe[18] == 0xac) && |
| (macp->supIe[19] == 0x2)) |
| { |
| printk(KERN_ERR |
| "wd->sta.authMode = ZM_AUTH_MODE_WPA2PSK\n"); |
| /* wd->sta.authMode = ZM_AUTH_MODE_WPA2PSK; */ |
| /* wd->ws.authMode = ZM_AUTH_MODE_WPA2PSK; */ |
| zfiWlanSetAuthenticationMode(dev, |
| ZM_AUTH_MODE_WPA2PSK); |
| } else if ((macp->supIe[17] == 0xf) && |
| (macp->supIe[18] == 0xac) && |
| (macp->supIe[19] == 0x1)) |
| { |
| printk(KERN_ERR |
| "wd->sta.authMode = ZM_AUTH_MODE_WPA2\n"); |
| /* wd->sta.authMode = ZM_AUTH_MODE_WPA2; */ |
| /* wd->ws.authMode = ZM_AUTH_MODE_WPA2; */ |
| zfiWlanSetAuthenticationMode(dev, |
| ZM_AUTH_MODE_WPA2); |
| } |
| /* WPA or WPAPSK */ |
| if ((macp->supIe[21] == 0x50) || |
| (macp->supIe[22] == 0xf2)) { |
| if (macp->supIe[11] == 0x2) { |
| printk(KERN_ERR |
| "wd->sta.wepStatus = ZM_ENCRYPTION_TKIP\n"); |
| /* wd->sta.wepStatus = ZM_ENCRYPTION_TKIP; */ |
| /* wd->ws.wepStatus = ZM_ENCRYPTION_TKIP; */ |
| zfiWlanSetWepStatus(dev, ZM_ENCRYPTION_TKIP); |
| } else { |
| printk(KERN_ERR |
| "wd->sta.wepStatus = ZM_ENCRYPTION_AES\n"); |
| /* wd->sta.wepStatus = ZM_ENCRYPTION_AES; */ |
| /* wd->ws.wepStatus = ZM_ENCRYPTION_AES; */ |
| zfiWlanSetWepStatus(dev, ZM_ENCRYPTION_AES); |
| } |
| } |
| //WPA2 or WPA2PSK |
| if ((macp->supIe[17] == 0xf) || |
| (macp->supIe[18] == 0xac)) { |
| if (macp->supIe[13] == 0x2) { |
| printk(KERN_ERR |
| "wd->sta.wepStatus = ZM_ENCRYPTION_TKIP\n"); |
| /* wd->sta.wepStatus = ZM_ENCRYPTION_TKIP; */ |
| /* wd->ws.wepStatus = ZM_ENCRYPTION_TKIP; */ |
| zfiWlanSetWepStatus(dev, ZM_ENCRYPTION_TKIP); |
| } else { |
| printk(KERN_ERR |
| "wd->sta.wepStatus = ZM_ENCRYPTION_AES\n"); |
| /* wd->sta.wepStatus = ZM_ENCRYPTION_AES; */ |
| /* wd->ws.wepStatus = ZM_ENCRYPTION_AES; */ |
| zfiWlanSetWepStatus(dev, ZM_ENCRYPTION_AES); |
| } |
| } |
| } |
| zfiWlanSetWpaSupport(dev, 1); |
| } else { |
| /* Reset the WPA related variables */ |
| printk(KERN_ERR "disable\n"); |
| |
| zfiWlanSetWpaSupport(dev, 0); |
| zfiWlanSetAuthenticationMode(dev, ZM_AUTH_MODE_OPEN); |
| zfiWlanSetWepStatus(dev, ZM_ENCRYPTION_WEP_DISABLED); |
| |
| /* Now we only set the length in the WPA IE |
| * field to zero. |
| *macp->cardSetting.WPAIe[1] = 0; |
| */ |
| } |
| } |
| |
| if (op == ZD_PARAM_COUNTERMEASURES) { |
| printk(KERN_ERR |
| "****************ZD_PARAM_COUNTERMEASURES : "); |
| |
| if(arg) { |
| /* mCounterMeasureState=1; */ |
| printk(KERN_ERR "enable\n"); |
| } else { |
| /* mCounterMeasureState=0; */ |
| printk(KERN_ERR "disable\n"); |
| } |
| } |
| if (op == ZD_PARAM_DROPUNENCRYPTED) { |
| printk(KERN_ERR "ZD_PARAM_DROPUNENCRYPTED : "); |
| |
| if(arg) { |
| printk(KERN_ERR "enable\n"); |
| } else { |
| printk(KERN_ERR "disable\n"); |
| } |
| } |
| if (op == ZD_PARAM_AUTH_ALGS) { |
| printk(KERN_ERR "ZD_PARAM_AUTH_ALGS : "); |
| |
| if (arg == 0) { |
| printk(KERN_ERR "OPEN_SYSTEM\n"); |
| } else { |
| printk(KERN_ERR "SHARED_KEY\n"); |
| } |
| } |
| if (op == ZD_PARAM_WPS_FILTER) { |
| printk(KERN_ERR "ZD_PARAM_WPS_FILTER : "); |
| |
| if (arg) { |
| /* mCounterMeasureState=1; */ |
| macp->forwardMgmt = 1; |
| printk(KERN_ERR "enable\n"); |
| } else { |
| /* mCounterMeasureState=0; */ |
| macp->forwardMgmt = 0; |
| printk(KERN_ERR "disable\n"); |
| } |
| } |
| } |
| err = 0; |
| break; |
| case ZD_IOCTL_GETWPAIE: { |
| struct ieee80211req_wpaie req_wpaie; |
| u16_t apId, i, j; |
| |
| /* Get the AP Id */ |
| apId = zfLnxGetVapId(dev); |
| |
| if (apId == 0xffff) { |
| apId = 0; |
| } else { |
| apId = apId + 1; |
| } |
| |
| if (copy_from_user(&req_wpaie, ifr->ifr_data, |
| sizeof(struct ieee80211req_wpaie))) { |
| printk(KERN_ERR "usbdrv : copy_from_user error\n"); |
| return -EFAULT; |
| } |
| |
| for (i = 0; i < ZM_OAL_MAX_STA_SUPPORT; i++) { |
| for (j = 0; j < IEEE80211_ADDR_LEN; j++) { |
| if (macp->stawpaie[i].wpa_macaddr[j] != |
| req_wpaie.wpa_macaddr[j]) |
| break; |
| } |
| if (j == 6) |
| break; |
| } |
| |
| if (i < ZM_OAL_MAX_STA_SUPPORT) { |
| /* printk("ZD_IOCTL_GETWPAIE - sta index = % d\n", i); */ |
| memcpy(req_wpaie.wpa_ie, macp->stawpaie[i].wpa_ie, |
| IEEE80211_MAX_IE_SIZE); |
| } |
| |
| if (copy_to_user(wrq->u.data.pointer, &req_wpaie, |
| sizeof(struct ieee80211req_wpaie))) { |
| return -EFAULT; |
| } |
| } |
| |
| err = 0; |
| break; |
| #ifdef ZM_ENABLE_CENC |
| case ZM_IOCTL_CENC: |
| if (copy_from_user(&macp->zd_wpa_req, ifr->ifr_data, |
| sizeof(struct athr_wlan_param))) { |
| printk(KERN_ERR "usbdrv : copy_from_user error\n"); |
| return -EFAULT; |
| } |
| |
| usbdrv_cenc_ioctl(dev, |
| (struct zydas_cenc_param *)&macp->zd_wpa_req); |
| err = 0; |
| break; |
| #endif /* ZM_ENABLE_CENC */ |
| default: |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| return err; |
| } |