| /* | 
 |  *  GPIO driven matrix keyboard driver | 
 |  * | 
 |  *  Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> | 
 |  * | 
 |  *  Based on corgikbd.c | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License version 2 as | 
 |  *  published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/types.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/init.h> | 
 | #include <linux/input.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/module.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/input/matrix_keypad.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | struct matrix_keypad { | 
 | 	const struct matrix_keypad_platform_data *pdata; | 
 | 	struct input_dev *input_dev; | 
 | 	unsigned short *keycodes; | 
 | 	unsigned int row_shift; | 
 |  | 
 | 	DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS); | 
 |  | 
 | 	uint32_t last_key_state[MATRIX_MAX_COLS]; | 
 | 	struct delayed_work work; | 
 | 	spinlock_t lock; | 
 | 	bool scan_pending; | 
 | 	bool stopped; | 
 | }; | 
 |  | 
 | /* | 
 |  * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause | 
 |  * minmal side effect when scanning other columns, here it is configured to | 
 |  * be input, and it should work on most platforms. | 
 |  */ | 
 | static void __activate_col(const struct matrix_keypad_platform_data *pdata, | 
 | 			   int col, bool on) | 
 | { | 
 | 	bool level_on = !pdata->active_low; | 
 |  | 
 | 	if (on) { | 
 | 		gpio_direction_output(pdata->col_gpios[col], level_on); | 
 | 	} else { | 
 | 		gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); | 
 | 		gpio_direction_input(pdata->col_gpios[col]); | 
 | 	} | 
 | } | 
 |  | 
 | static void activate_col(const struct matrix_keypad_platform_data *pdata, | 
 | 			 int col, bool on) | 
 | { | 
 | 	__activate_col(pdata, col, on); | 
 |  | 
 | 	if (on && pdata->col_scan_delay_us) | 
 | 		udelay(pdata->col_scan_delay_us); | 
 | } | 
 |  | 
 | static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, | 
 | 			      bool on) | 
 | { | 
 | 	int col; | 
 |  | 
 | 	for (col = 0; col < pdata->num_col_gpios; col++) | 
 | 		__activate_col(pdata, col, on); | 
 | } | 
 |  | 
 | static bool row_asserted(const struct matrix_keypad_platform_data *pdata, | 
 | 			 int row) | 
 | { | 
 | 	return gpio_get_value_cansleep(pdata->row_gpios[row]) ? | 
 | 			!pdata->active_low : pdata->active_low; | 
 | } | 
 |  | 
 | static void enable_row_irqs(struct matrix_keypad *keypad) | 
 | { | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < pdata->num_row_gpios; i++) | 
 | 		enable_irq(gpio_to_irq(pdata->row_gpios[i])); | 
 | } | 
 |  | 
 | static void disable_row_irqs(struct matrix_keypad *keypad) | 
 | { | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < pdata->num_row_gpios; i++) | 
 | 		disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); | 
 | } | 
 |  | 
 | /* | 
 |  * This gets the keys from keyboard and reports it to input subsystem | 
 |  */ | 
 | static void matrix_keypad_scan(struct work_struct *work) | 
 | { | 
 | 	struct matrix_keypad *keypad = | 
 | 		container_of(work, struct matrix_keypad, work.work); | 
 | 	struct input_dev *input_dev = keypad->input_dev; | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	uint32_t new_state[MATRIX_MAX_COLS]; | 
 | 	int row, col, code; | 
 |  | 
 | 	/* de-activate all columns for scanning */ | 
 | 	activate_all_cols(pdata, false); | 
 |  | 
 | 	memset(new_state, 0, sizeof(new_state)); | 
 |  | 
 | 	/* assert each column and read the row status out */ | 
 | 	for (col = 0; col < pdata->num_col_gpios; col++) { | 
 |  | 
 | 		activate_col(pdata, col, true); | 
 |  | 
 | 		for (row = 0; row < pdata->num_row_gpios; row++) | 
 | 			new_state[col] |= | 
 | 				row_asserted(pdata, row) ? (1 << row) : 0; | 
 |  | 
 | 		activate_col(pdata, col, false); | 
 | 	} | 
 |  | 
 | 	for (col = 0; col < pdata->num_col_gpios; col++) { | 
 | 		uint32_t bits_changed; | 
 |  | 
 | 		bits_changed = keypad->last_key_state[col] ^ new_state[col]; | 
 | 		if (bits_changed == 0) | 
 | 			continue; | 
 |  | 
 | 		for (row = 0; row < pdata->num_row_gpios; row++) { | 
 | 			if ((bits_changed & (1 << row)) == 0) | 
 | 				continue; | 
 |  | 
 | 			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); | 
 | 			input_event(input_dev, EV_MSC, MSC_SCAN, code); | 
 | 			input_report_key(input_dev, | 
 | 					 keypad->keycodes[code], | 
 | 					 new_state[col] & (1 << row)); | 
 | 		} | 
 | 	} | 
 | 	input_sync(input_dev); | 
 |  | 
 | 	memcpy(keypad->last_key_state, new_state, sizeof(new_state)); | 
 |  | 
 | 	activate_all_cols(pdata, true); | 
 |  | 
 | 	/* Enable IRQs again */ | 
 | 	spin_lock_irq(&keypad->lock); | 
 | 	keypad->scan_pending = false; | 
 | 	enable_row_irqs(keypad); | 
 | 	spin_unlock_irq(&keypad->lock); | 
 | } | 
 |  | 
 | static irqreturn_t matrix_keypad_interrupt(int irq, void *id) | 
 | { | 
 | 	struct matrix_keypad *keypad = id; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&keypad->lock, flags); | 
 |  | 
 | 	/* | 
 | 	 * See if another IRQ beaten us to it and scheduled the | 
 | 	 * scan already. In that case we should not try to | 
 | 	 * disable IRQs again. | 
 | 	 */ | 
 | 	if (unlikely(keypad->scan_pending || keypad->stopped)) | 
 | 		goto out; | 
 |  | 
 | 	disable_row_irqs(keypad); | 
 | 	keypad->scan_pending = true; | 
 | 	schedule_delayed_work(&keypad->work, | 
 | 		msecs_to_jiffies(keypad->pdata->debounce_ms)); | 
 |  | 
 | out: | 
 | 	spin_unlock_irqrestore(&keypad->lock, flags); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int matrix_keypad_start(struct input_dev *dev) | 
 | { | 
 | 	struct matrix_keypad *keypad = input_get_drvdata(dev); | 
 |  | 
 | 	keypad->stopped = false; | 
 | 	mb(); | 
 |  | 
 | 	/* | 
 | 	 * Schedule an immediate key scan to capture current key state; | 
 | 	 * columns will be activated and IRQs be enabled after the scan. | 
 | 	 */ | 
 | 	schedule_delayed_work(&keypad->work, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void matrix_keypad_stop(struct input_dev *dev) | 
 | { | 
 | 	struct matrix_keypad *keypad = input_get_drvdata(dev); | 
 |  | 
 | 	keypad->stopped = true; | 
 | 	mb(); | 
 | 	flush_work(&keypad->work.work); | 
 | 	/* | 
 | 	 * matrix_keypad_scan() will leave IRQs enabled; | 
 | 	 * we should disable them now. | 
 | 	 */ | 
 | 	disable_row_irqs(keypad); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int matrix_keypad_suspend(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct matrix_keypad *keypad = platform_get_drvdata(pdev); | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	int i; | 
 |  | 
 | 	matrix_keypad_stop(keypad->input_dev); | 
 |  | 
 | 	if (device_may_wakeup(&pdev->dev)) { | 
 | 		for (i = 0; i < pdata->num_row_gpios; i++) { | 
 | 			if (!test_bit(i, keypad->disabled_gpios)) { | 
 | 				unsigned int gpio = pdata->row_gpios[i]; | 
 |  | 
 | 				if (enable_irq_wake(gpio_to_irq(gpio)) == 0) | 
 | 					__set_bit(i, keypad->disabled_gpios); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int matrix_keypad_resume(struct device *dev) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 | 	struct matrix_keypad *keypad = platform_get_drvdata(pdev); | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	int i; | 
 |  | 
 | 	if (device_may_wakeup(&pdev->dev)) { | 
 | 		for (i = 0; i < pdata->num_row_gpios; i++) { | 
 | 			if (test_and_clear_bit(i, keypad->disabled_gpios)) { | 
 | 				unsigned int gpio = pdata->row_gpios[i]; | 
 |  | 
 | 				disable_irq_wake(gpio_to_irq(gpio)); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	matrix_keypad_start(keypad->input_dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, | 
 | 				matrix_keypad_suspend, matrix_keypad_resume); | 
 | #endif | 
 |  | 
 | static int __devinit init_matrix_gpio(struct platform_device *pdev, | 
 | 					struct matrix_keypad *keypad) | 
 | { | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	int i, err = -EINVAL; | 
 |  | 
 | 	/* initialized strobe lines as outputs, activated */ | 
 | 	for (i = 0; i < pdata->num_col_gpios; i++) { | 
 | 		err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); | 
 | 		if (err) { | 
 | 			dev_err(&pdev->dev, | 
 | 				"failed to request GPIO%d for COL%d\n", | 
 | 				pdata->col_gpios[i], i); | 
 | 			goto err_free_cols; | 
 | 		} | 
 |  | 
 | 		gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < pdata->num_row_gpios; i++) { | 
 | 		err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); | 
 | 		if (err) { | 
 | 			dev_err(&pdev->dev, | 
 | 				"failed to request GPIO%d for ROW%d\n", | 
 | 				pdata->row_gpios[i], i); | 
 | 			goto err_free_rows; | 
 | 		} | 
 |  | 
 | 		gpio_direction_input(pdata->row_gpios[i]); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < pdata->num_row_gpios; i++) { | 
 | 		err = request_irq(gpio_to_irq(pdata->row_gpios[i]), | 
 | 				matrix_keypad_interrupt, | 
 | 				IRQF_DISABLED | | 
 | 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | 
 | 				"matrix-keypad", keypad); | 
 | 		if (err) { | 
 | 			dev_err(&pdev->dev, | 
 | 				"Unable to acquire interrupt for GPIO line %i\n", | 
 | 				pdata->row_gpios[i]); | 
 | 			goto err_free_irqs; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* initialized as disabled - enabled by input->open */ | 
 | 	disable_row_irqs(keypad); | 
 | 	return 0; | 
 |  | 
 | err_free_irqs: | 
 | 	while (--i >= 0) | 
 | 		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); | 
 | 	i = pdata->num_row_gpios; | 
 | err_free_rows: | 
 | 	while (--i >= 0) | 
 | 		gpio_free(pdata->row_gpios[i]); | 
 | 	i = pdata->num_col_gpios; | 
 | err_free_cols: | 
 | 	while (--i >= 0) | 
 | 		gpio_free(pdata->col_gpios[i]); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __devinit matrix_keypad_probe(struct platform_device *pdev) | 
 | { | 
 | 	const struct matrix_keypad_platform_data *pdata; | 
 | 	const struct matrix_keymap_data *keymap_data; | 
 | 	struct matrix_keypad *keypad; | 
 | 	struct input_dev *input_dev; | 
 | 	unsigned short *keycodes; | 
 | 	unsigned int row_shift; | 
 | 	int err; | 
 |  | 
 | 	pdata = pdev->dev.platform_data; | 
 | 	if (!pdata) { | 
 | 		dev_err(&pdev->dev, "no platform data defined\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	keymap_data = pdata->keymap_data; | 
 | 	if (!keymap_data) { | 
 | 		dev_err(&pdev->dev, "no keymap data defined\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	row_shift = get_count_order(pdata->num_col_gpios); | 
 |  | 
 | 	keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); | 
 | 	keycodes = kzalloc((pdata->num_row_gpios << row_shift) * | 
 | 				sizeof(*keycodes), | 
 | 			   GFP_KERNEL); | 
 | 	input_dev = input_allocate_device(); | 
 | 	if (!keypad || !keycodes || !input_dev) { | 
 | 		err = -ENOMEM; | 
 | 		goto err_free_mem; | 
 | 	} | 
 |  | 
 | 	keypad->input_dev = input_dev; | 
 | 	keypad->pdata = pdata; | 
 | 	keypad->keycodes = keycodes; | 
 | 	keypad->row_shift = row_shift; | 
 | 	keypad->stopped = true; | 
 | 	INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); | 
 | 	spin_lock_init(&keypad->lock); | 
 |  | 
 | 	input_dev->name		= pdev->name; | 
 | 	input_dev->id.bustype	= BUS_HOST; | 
 | 	input_dev->dev.parent	= &pdev->dev; | 
 | 	input_dev->evbit[0]	= BIT_MASK(EV_KEY); | 
 | 	if (!pdata->no_autorepeat) | 
 | 		input_dev->evbit[0] |= BIT_MASK(EV_REP); | 
 | 	input_dev->open		= matrix_keypad_start; | 
 | 	input_dev->close	= matrix_keypad_stop; | 
 |  | 
 | 	input_dev->keycode	= keycodes; | 
 | 	input_dev->keycodesize	= sizeof(*keycodes); | 
 | 	input_dev->keycodemax	= pdata->num_row_gpios << row_shift; | 
 |  | 
 | 	matrix_keypad_build_keymap(keymap_data, row_shift, | 
 | 				   input_dev->keycode, input_dev->keybit); | 
 |  | 
 | 	input_set_capability(input_dev, EV_MSC, MSC_SCAN); | 
 | 	input_set_drvdata(input_dev, keypad); | 
 |  | 
 | 	err = init_matrix_gpio(pdev, keypad); | 
 | 	if (err) | 
 | 		goto err_free_mem; | 
 |  | 
 | 	err = input_register_device(keypad->input_dev); | 
 | 	if (err) | 
 | 		goto err_free_mem; | 
 |  | 
 | 	device_init_wakeup(&pdev->dev, pdata->wakeup); | 
 | 	platform_set_drvdata(pdev, keypad); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_mem: | 
 | 	input_free_device(input_dev); | 
 | 	kfree(keycodes); | 
 | 	kfree(keypad); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __devexit matrix_keypad_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct matrix_keypad *keypad = platform_get_drvdata(pdev); | 
 | 	const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
 | 	int i; | 
 |  | 
 | 	device_init_wakeup(&pdev->dev, 0); | 
 |  | 
 | 	for (i = 0; i < pdata->num_row_gpios; i++) { | 
 | 		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); | 
 | 		gpio_free(pdata->row_gpios[i]); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < pdata->num_col_gpios; i++) | 
 | 		gpio_free(pdata->col_gpios[i]); | 
 |  | 
 | 	input_unregister_device(keypad->input_dev); | 
 | 	platform_set_drvdata(pdev, NULL); | 
 | 	kfree(keypad->keycodes); | 
 | 	kfree(keypad); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver matrix_keypad_driver = { | 
 | 	.probe		= matrix_keypad_probe, | 
 | 	.remove		= __devexit_p(matrix_keypad_remove), | 
 | 	.driver		= { | 
 | 		.name	= "matrix-keypad", | 
 | 		.owner	= THIS_MODULE, | 
 | #ifdef CONFIG_PM | 
 | 		.pm	= &matrix_keypad_pm_ops, | 
 | #endif | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init matrix_keypad_init(void) | 
 | { | 
 | 	return platform_driver_register(&matrix_keypad_driver); | 
 | } | 
 |  | 
 | static void __exit matrix_keypad_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&matrix_keypad_driver); | 
 | } | 
 |  | 
 | module_init(matrix_keypad_init); | 
 | module_exit(matrix_keypad_exit); | 
 |  | 
 | MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); | 
 | MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_ALIAS("platform:matrix-keypad"); |