| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Thomas Horsten <thh@lasat.com> |
| * Copyright (C) 2000 LASAT Networks A/S. |
| * |
| * Routines specific to the LASAT boards |
| */ |
| #include <linux/types.h> |
| #include <asm/lasat/lasat.h> |
| |
| #include <linux/sysctl.h> |
| #include <linux/stddef.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/ctype.h> |
| #include <linux/string.h> |
| #include <linux/net.h> |
| #include <linux/inet.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/time.h> |
| |
| #ifdef CONFIG_DS1603 |
| #include "ds1603.h" |
| #endif |
| |
| |
| /* And the same for proc */ |
| int proc_dolasatstring(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int r; |
| |
| r = proc_dostring(table, write, buffer, lenp, ppos); |
| if ((!write) || r) |
| return r; |
| |
| lasat_write_eeprom_info(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DS1603 |
| static int rtctmp; |
| |
| /* proc function to read/write RealTime Clock */ |
| int proc_dolasatrtc(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| struct timespec64 ts; |
| int r; |
| |
| if (!write) { |
| read_persistent_clock64(&ts); |
| rtctmp = ts.tv_sec; |
| /* check for time < 0 and set to 0 */ |
| if (rtctmp < 0) |
| rtctmp = 0; |
| } |
| r = proc_dointvec(table, write, buffer, lenp, ppos); |
| if (r) |
| return r; |
| |
| if (write) { |
| /* |
| * Due to the RTC hardware limitation, we can not actually |
| * use the full 64-bit range here. |
| */ |
| ts.tv_sec = rtctmp; |
| ts.tv_nsec = 0; |
| |
| update_persistent_clock64(ts); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_INET |
| int proc_lasat_ip(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| unsigned int ip; |
| char *p, c; |
| int len; |
| char ipbuf[32]; |
| |
| if (!table->data || !table->maxlen || !*lenp || |
| (*ppos && !write)) { |
| *lenp = 0; |
| return 0; |
| } |
| |
| if (write) { |
| len = 0; |
| p = buffer; |
| while (len < *lenp) { |
| if (get_user(c, p++)) |
| return -EFAULT; |
| if (c == 0 || c == '\n') |
| break; |
| len++; |
| } |
| if (len >= sizeof(ipbuf)-1) |
| len = sizeof(ipbuf) - 1; |
| if (copy_from_user(ipbuf, buffer, len)) |
| return -EFAULT; |
| ipbuf[len] = 0; |
| *ppos += *lenp; |
| /* Now see if we can convert it to a valid IP */ |
| ip = in_aton(ipbuf); |
| *(unsigned int *)(table->data) = ip; |
| lasat_write_eeprom_info(); |
| } else { |
| ip = *(unsigned int *)(table->data); |
| sprintf(ipbuf, "%d.%d.%d.%d", |
| (ip) & 0xff, |
| (ip >> 8) & 0xff, |
| (ip >> 16) & 0xff, |
| (ip >> 24) & 0xff); |
| len = strlen(ipbuf); |
| if (len > *lenp) |
| len = *lenp; |
| if (len) |
| if (copy_to_user(buffer, ipbuf, len)) |
| return -EFAULT; |
| if (len < *lenp) { |
| if (put_user('\n', ((char *) buffer) + len)) |
| return -EFAULT; |
| len++; |
| } |
| *lenp = len; |
| *ppos += len; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| int proc_lasat_prid(struct ctl_table *table, int write, |
| void *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int r; |
| |
| r = proc_dointvec(table, write, buffer, lenp, ppos); |
| if (r < 0) |
| return r; |
| if (write) { |
| lasat_board_info.li_eeprom_info.prid = |
| lasat_board_info.li_prid; |
| lasat_write_eeprom_info(); |
| lasat_init_board_info(); |
| } |
| return 0; |
| } |
| |
| extern int lasat_boot_to_service; |
| |
| static struct ctl_table lasat_table[] = { |
| { |
| .procname = "cpu-hz", |
| .data = &lasat_board_info.li_cpu_hz, |
| .maxlen = sizeof(int), |
| .mode = 0444, |
| .proc_handler = proc_dointvec, |
| }, |
| { |
| .procname = "bus-hz", |
| .data = &lasat_board_info.li_bus_hz, |
| .maxlen = sizeof(int), |
| .mode = 0444, |
| .proc_handler = proc_dointvec, |
| }, |
| { |
| .procname = "bmid", |
| .data = &lasat_board_info.li_bmid, |
| .maxlen = sizeof(int), |
| .mode = 0444, |
| .proc_handler = proc_dointvec, |
| }, |
| { |
| .procname = "prid", |
| .data = &lasat_board_info.li_prid, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_lasat_prid, |
| }, |
| #ifdef CONFIG_INET |
| { |
| .procname = "ipaddr", |
| .data = &lasat_board_info.li_eeprom_info.ipaddr, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_lasat_ip, |
| }, |
| { |
| .procname = "netmask", |
| .data = &lasat_board_info.li_eeprom_info.netmask, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_lasat_ip, |
| }, |
| #endif |
| { |
| .procname = "passwd_hash", |
| .data = &lasat_board_info.li_eeprom_info.passwd_hash, |
| .maxlen = |
| sizeof(lasat_board_info.li_eeprom_info.passwd_hash), |
| .mode = 0600, |
| .proc_handler = proc_dolasatstring, |
| }, |
| { |
| .procname = "boot-service", |
| .data = &lasat_boot_to_service, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec, |
| }, |
| #ifdef CONFIG_DS1603 |
| { |
| .procname = "rtc", |
| .data = &rtctmp, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dolasatrtc, |
| }, |
| #endif |
| { |
| .procname = "namestr", |
| .data = &lasat_board_info.li_namestr, |
| .maxlen = sizeof(lasat_board_info.li_namestr), |
| .mode = 0444, |
| .proc_handler = proc_dostring, |
| }, |
| { |
| .procname = "typestr", |
| .data = &lasat_board_info.li_typestr, |
| .maxlen = sizeof(lasat_board_info.li_typestr), |
| .mode = 0444, |
| .proc_handler = proc_dostring, |
| }, |
| {} |
| }; |
| |
| static struct ctl_table lasat_root_table[] = { |
| { |
| .procname = "lasat", |
| .mode = 0555, |
| .child = lasat_table |
| }, |
| {} |
| }; |
| |
| static int __init lasat_register_sysctl(void) |
| { |
| struct ctl_table_header *lasat_table_header; |
| |
| lasat_table_header = |
| register_sysctl_table(lasat_root_table); |
| if (!lasat_table_header) { |
| printk(KERN_ERR "Unable to register LASAT sysctl\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| arch_initcall(lasat_register_sysctl); |