| /* | |
| * Debugfs support for hosts and cards | |
| * | |
| * Copyright (C) 2008 Atmel Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/moduleparam.h> | |
| #include <linux/export.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <linux/stat.h> | |
| #include <linux/fault-inject.h> | |
| #include <linux/mmc/card.h> | |
| #include <linux/mmc/host.h> | |
| #include "core.h" | |
| #include "mmc_ops.h" | |
| #ifdef CONFIG_FAIL_MMC_REQUEST | |
| static DECLARE_FAULT_ATTR(fail_default_attr); | |
| static char *fail_request; | |
| module_param(fail_request, charp, 0); | |
| #endif /* CONFIG_FAIL_MMC_REQUEST */ | |
| /* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */ | |
| static int mmc_ios_show(struct seq_file *s, void *data) | |
| { | |
| static const char *vdd_str[] = { | |
| [8] = "2.0", | |
| [9] = "2.1", | |
| [10] = "2.2", | |
| [11] = "2.3", | |
| [12] = "2.4", | |
| [13] = "2.5", | |
| [14] = "2.6", | |
| [15] = "2.7", | |
| [16] = "2.8", | |
| [17] = "2.9", | |
| [18] = "3.0", | |
| [19] = "3.1", | |
| [20] = "3.2", | |
| [21] = "3.3", | |
| [22] = "3.4", | |
| [23] = "3.5", | |
| [24] = "3.6", | |
| }; | |
| struct mmc_host *host = s->private; | |
| struct mmc_ios *ios = &host->ios; | |
| const char *str; | |
| seq_printf(s, "clock:\t\t%u Hz\n", ios->clock); | |
| if (host->actual_clock) | |
| seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock); | |
| seq_printf(s, "vdd:\t\t%u ", ios->vdd); | |
| if ((1 << ios->vdd) & MMC_VDD_165_195) | |
| seq_printf(s, "(1.65 - 1.95 V)\n"); | |
| else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1) | |
| && vdd_str[ios->vdd] && vdd_str[ios->vdd + 1]) | |
| seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd], | |
| vdd_str[ios->vdd + 1]); | |
| else | |
| seq_printf(s, "(invalid)\n"); | |
| switch (ios->bus_mode) { | |
| case MMC_BUSMODE_OPENDRAIN: | |
| str = "open drain"; | |
| break; | |
| case MMC_BUSMODE_PUSHPULL: | |
| str = "push-pull"; | |
| break; | |
| default: | |
| str = "invalid"; | |
| break; | |
| } | |
| seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str); | |
| switch (ios->chip_select) { | |
| case MMC_CS_DONTCARE: | |
| str = "don't care"; | |
| break; | |
| case MMC_CS_HIGH: | |
| str = "active high"; | |
| break; | |
| case MMC_CS_LOW: | |
| str = "active low"; | |
| break; | |
| default: | |
| str = "invalid"; | |
| break; | |
| } | |
| seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str); | |
| switch (ios->power_mode) { | |
| case MMC_POWER_OFF: | |
| str = "off"; | |
| break; | |
| case MMC_POWER_UP: | |
| str = "up"; | |
| break; | |
| case MMC_POWER_ON: | |
| str = "on"; | |
| break; | |
| default: | |
| str = "invalid"; | |
| break; | |
| } | |
| seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str); | |
| seq_printf(s, "bus width:\t%u (%u bits)\n", | |
| ios->bus_width, 1 << ios->bus_width); | |
| switch (ios->timing) { | |
| case MMC_TIMING_LEGACY: | |
| str = "legacy"; | |
| break; | |
| case MMC_TIMING_MMC_HS: | |
| str = "mmc high-speed"; | |
| break; | |
| case MMC_TIMING_SD_HS: | |
| str = "sd high-speed"; | |
| break; | |
| case MMC_TIMING_UHS_SDR50: | |
| str = "sd uhs SDR50"; | |
| break; | |
| case MMC_TIMING_UHS_SDR104: | |
| str = "sd uhs SDR104"; | |
| break; | |
| case MMC_TIMING_UHS_DDR50: | |
| str = "sd uhs DDR50"; | |
| break; | |
| case MMC_TIMING_MMC_DDR52: | |
| str = "mmc DDR52"; | |
| break; | |
| case MMC_TIMING_MMC_HS200: | |
| str = "mmc HS200"; | |
| break; | |
| case MMC_TIMING_MMC_HS400: | |
| str = "mmc HS400"; | |
| break; | |
| default: | |
| str = "invalid"; | |
| break; | |
| } | |
| seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str); | |
| switch (ios->signal_voltage) { | |
| case MMC_SIGNAL_VOLTAGE_330: | |
| str = "3.30 V"; | |
| break; | |
| case MMC_SIGNAL_VOLTAGE_180: | |
| str = "1.80 V"; | |
| break; | |
| case MMC_SIGNAL_VOLTAGE_120: | |
| str = "1.20 V"; | |
| break; | |
| default: | |
| str = "invalid"; | |
| break; | |
| } | |
| seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str); | |
| return 0; | |
| } | |
| static int mmc_ios_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, mmc_ios_show, inode->i_private); | |
| } | |
| static const struct file_operations mmc_ios_fops = { | |
| .open = mmc_ios_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| static int mmc_clock_opt_get(void *data, u64 *val) | |
| { | |
| struct mmc_host *host = data; | |
| *val = host->ios.clock; | |
| return 0; | |
| } | |
| static int mmc_clock_opt_set(void *data, u64 val) | |
| { | |
| struct mmc_host *host = data; | |
| /* We need this check due to input value is u64 */ | |
| if (val > host->f_max) | |
| return -EINVAL; | |
| mmc_claim_host(host); | |
| mmc_set_clock(host, (unsigned int) val); | |
| mmc_release_host(host); | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set, | |
| "%llu\n"); | |
| void mmc_add_host_debugfs(struct mmc_host *host) | |
| { | |
| struct dentry *root; | |
| root = debugfs_create_dir(mmc_hostname(host), NULL); | |
| if (IS_ERR(root)) | |
| /* Don't complain -- debugfs just isn't enabled */ | |
| return; | |
| if (!root) | |
| /* Complain -- debugfs is enabled, but it failed to | |
| * create the directory. */ | |
| goto err_root; | |
| host->debugfs_root = root; | |
| if (!debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops)) | |
| goto err_node; | |
| if (!debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host, | |
| &mmc_clock_fops)) | |
| goto err_node; | |
| #ifdef CONFIG_MMC_CLKGATE | |
| if (!debugfs_create_u32("clk_delay", (S_IRUSR | S_IWUSR), | |
| root, &host->clk_delay)) | |
| goto err_node; | |
| #endif | |
| #ifdef CONFIG_FAIL_MMC_REQUEST | |
| if (fail_request) | |
| setup_fault_attr(&fail_default_attr, fail_request); | |
| host->fail_mmc_request = fail_default_attr; | |
| if (IS_ERR(fault_create_debugfs_attr("fail_mmc_request", | |
| root, | |
| &host->fail_mmc_request))) | |
| goto err_node; | |
| #endif | |
| return; | |
| err_node: | |
| debugfs_remove_recursive(root); | |
| host->debugfs_root = NULL; | |
| err_root: | |
| dev_err(&host->class_dev, "failed to initialize debugfs\n"); | |
| } | |
| void mmc_remove_host_debugfs(struct mmc_host *host) | |
| { | |
| debugfs_remove_recursive(host->debugfs_root); | |
| } | |
| static int mmc_dbg_card_status_get(void *data, u64 *val) | |
| { | |
| struct mmc_card *card = data; | |
| u32 status; | |
| int ret; | |
| mmc_get_card(card); | |
| ret = mmc_send_status(data, &status); | |
| if (!ret) | |
| *val = status; | |
| mmc_put_card(card); | |
| return ret; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get, | |
| NULL, "%08llx\n"); | |
| #define EXT_CSD_STR_LEN 1025 | |
| static int mmc_ext_csd_open(struct inode *inode, struct file *filp) | |
| { | |
| struct mmc_card *card = inode->i_private; | |
| char *buf; | |
| ssize_t n = 0; | |
| u8 *ext_csd; | |
| int err, i; | |
| buf = kmalloc(EXT_CSD_STR_LEN + 1, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ext_csd = kmalloc(512, GFP_KERNEL); | |
| if (!ext_csd) { | |
| err = -ENOMEM; | |
| goto out_free; | |
| } | |
| mmc_get_card(card); | |
| err = mmc_send_ext_csd(card, ext_csd); | |
| mmc_put_card(card); | |
| if (err) | |
| goto out_free; | |
| for (i = 0; i < 512; i++) | |
| n += sprintf(buf + n, "%02x", ext_csd[i]); | |
| n += sprintf(buf + n, "\n"); | |
| BUG_ON(n != EXT_CSD_STR_LEN); | |
| filp->private_data = buf; | |
| kfree(ext_csd); | |
| return 0; | |
| out_free: | |
| kfree(buf); | |
| kfree(ext_csd); | |
| return err; | |
| } | |
| static ssize_t mmc_ext_csd_read(struct file *filp, char __user *ubuf, | |
| size_t cnt, loff_t *ppos) | |
| { | |
| char *buf = filp->private_data; | |
| return simple_read_from_buffer(ubuf, cnt, ppos, | |
| buf, EXT_CSD_STR_LEN); | |
| } | |
| static int mmc_ext_csd_release(struct inode *inode, struct file *file) | |
| { | |
| kfree(file->private_data); | |
| return 0; | |
| } | |
| static const struct file_operations mmc_dbg_ext_csd_fops = { | |
| .open = mmc_ext_csd_open, | |
| .read = mmc_ext_csd_read, | |
| .release = mmc_ext_csd_release, | |
| .llseek = default_llseek, | |
| }; | |
| void mmc_add_card_debugfs(struct mmc_card *card) | |
| { | |
| struct mmc_host *host = card->host; | |
| struct dentry *root; | |
| if (!host->debugfs_root) | |
| return; | |
| root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root); | |
| if (IS_ERR(root)) | |
| /* Don't complain -- debugfs just isn't enabled */ | |
| return; | |
| if (!root) | |
| /* Complain -- debugfs is enabled, but it failed to | |
| * create the directory. */ | |
| goto err; | |
| card->debugfs_root = root; | |
| if (!debugfs_create_x32("state", S_IRUSR, root, &card->state)) | |
| goto err; | |
| if (mmc_card_mmc(card) || mmc_card_sd(card)) | |
| if (!debugfs_create_file("status", S_IRUSR, root, card, | |
| &mmc_dbg_card_status_fops)) | |
| goto err; | |
| if (mmc_card_mmc(card)) | |
| if (!debugfs_create_file("ext_csd", S_IRUSR, root, card, | |
| &mmc_dbg_ext_csd_fops)) | |
| goto err; | |
| return; | |
| err: | |
| debugfs_remove_recursive(root); | |
| card->debugfs_root = NULL; | |
| dev_err(&card->dev, "failed to initialize debugfs\n"); | |
| } | |
| void mmc_remove_card_debugfs(struct mmc_card *card) | |
| { | |
| debugfs_remove_recursive(card->debugfs_root); | |
| } |