|  | /* QLogic qede NIC Driver | 
|  | * Copyright (c) 2015 QLogic Corporation | 
|  | * | 
|  | * This software is available under the terms of the GNU General Public License | 
|  | * (GPL) Version 2, available from the file COPYING in the main directory of | 
|  | * this source tree. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/version.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/param.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/netdev_features.h> | 
|  | #include <linux/udp.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <net/udp_tunnel.h> | 
|  | #include <linux/ip.h> | 
|  | #include <net/ipv6.h> | 
|  | #include <net/tcp.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/pkt_sched.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/random.h> | 
|  | #include <net/ip6_checksum.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/qed/qede_roce.h> | 
|  | #include "qede.h" | 
|  |  | 
|  | static char version[] = | 
|  | "QLogic FastLinQ 4xxxx Ethernet Driver qede " DRV_MODULE_VERSION "\n"; | 
|  |  | 
|  | MODULE_DESCRIPTION("QLogic FastLinQ 4xxxx Ethernet Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(DRV_MODULE_VERSION); | 
|  |  | 
|  | static uint debug; | 
|  | module_param(debug, uint, 0); | 
|  | MODULE_PARM_DESC(debug, " Default debug msglevel"); | 
|  |  | 
|  | static const struct qed_eth_ops *qed_ops; | 
|  |  | 
|  | #define CHIP_NUM_57980S_40		0x1634 | 
|  | #define CHIP_NUM_57980S_10		0x1666 | 
|  | #define CHIP_NUM_57980S_MF		0x1636 | 
|  | #define CHIP_NUM_57980S_100		0x1644 | 
|  | #define CHIP_NUM_57980S_50		0x1654 | 
|  | #define CHIP_NUM_57980S_25		0x1656 | 
|  | #define CHIP_NUM_57980S_IOV		0x1664 | 
|  |  | 
|  | #ifndef PCI_DEVICE_ID_NX2_57980E | 
|  | #define PCI_DEVICE_ID_57980S_40		CHIP_NUM_57980S_40 | 
|  | #define PCI_DEVICE_ID_57980S_10		CHIP_NUM_57980S_10 | 
|  | #define PCI_DEVICE_ID_57980S_MF		CHIP_NUM_57980S_MF | 
|  | #define PCI_DEVICE_ID_57980S_100	CHIP_NUM_57980S_100 | 
|  | #define PCI_DEVICE_ID_57980S_50		CHIP_NUM_57980S_50 | 
|  | #define PCI_DEVICE_ID_57980S_25		CHIP_NUM_57980S_25 | 
|  | #define PCI_DEVICE_ID_57980S_IOV	CHIP_NUM_57980S_IOV | 
|  | #endif | 
|  |  | 
|  | enum qede_pci_private { | 
|  | QEDE_PRIVATE_PF, | 
|  | QEDE_PRIVATE_VF | 
|  | }; | 
|  |  | 
|  | static const struct pci_device_id qede_pci_tbl[] = { | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_40), QEDE_PRIVATE_PF}, | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_10), QEDE_PRIVATE_PF}, | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_MF), QEDE_PRIVATE_PF}, | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_100), QEDE_PRIVATE_PF}, | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_50), QEDE_PRIVATE_PF}, | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_25), QEDE_PRIVATE_PF}, | 
|  | #ifdef CONFIG_QED_SRIOV | 
|  | {PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_IOV), QEDE_PRIVATE_VF}, | 
|  | #endif | 
|  | { 0 } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, qede_pci_tbl); | 
|  |  | 
|  | static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id); | 
|  |  | 
|  | #define TX_TIMEOUT		(5 * HZ) | 
|  |  | 
|  | /* Utilize last protocol index for XDP */ | 
|  | #define XDP_PI	11 | 
|  |  | 
|  | static void qede_remove(struct pci_dev *pdev); | 
|  | static void qede_shutdown(struct pci_dev *pdev); | 
|  | static void qede_link_update(void *dev, struct qed_link_output *link); | 
|  |  | 
|  | /* The qede lock is used to protect driver state change and driver flows that | 
|  | * are not reentrant. | 
|  | */ | 
|  | void __qede_lock(struct qede_dev *edev) | 
|  | { | 
|  | mutex_lock(&edev->qede_lock); | 
|  | } | 
|  |  | 
|  | void __qede_unlock(struct qede_dev *edev) | 
|  | { | 
|  | mutex_unlock(&edev->qede_lock); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_QED_SRIOV | 
|  | static int qede_set_vf_vlan(struct net_device *ndev, int vf, u16 vlan, u8 qos, | 
|  | __be16 vlan_proto) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  |  | 
|  | if (vlan > 4095) { | 
|  | DP_NOTICE(edev, "Illegal vlan value %d\n", vlan); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (vlan_proto != htons(ETH_P_8021Q)) | 
|  | return -EPROTONOSUPPORT; | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_IOV, "Setting Vlan 0x%04x to VF [%d]\n", | 
|  | vlan, vf); | 
|  |  | 
|  | return edev->ops->iov->set_vlan(edev->cdev, vlan, vf); | 
|  | } | 
|  |  | 
|  | static int qede_set_vf_mac(struct net_device *ndev, int vfidx, u8 *mac) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_IOV, | 
|  | "Setting MAC %02x:%02x:%02x:%02x:%02x:%02x to VF [%d]\n", | 
|  | mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], vfidx); | 
|  |  | 
|  | if (!is_valid_ether_addr(mac)) { | 
|  | DP_VERBOSE(edev, QED_MSG_IOV, "MAC address isn't valid\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return edev->ops->iov->set_mac(edev->cdev, mac, vfidx); | 
|  | } | 
|  |  | 
|  | static int qede_sriov_configure(struct pci_dev *pdev, int num_vfs_param) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(pci_get_drvdata(pdev)); | 
|  | struct qed_dev_info *qed_info = &edev->dev_info.common; | 
|  | int rc; | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_IOV, "Requested %d VFs\n", num_vfs_param); | 
|  |  | 
|  | rc = edev->ops->iov->configure(edev->cdev, num_vfs_param); | 
|  |  | 
|  | /* Enable/Disable Tx switching for PF */ | 
|  | if ((rc == num_vfs_param) && netif_running(edev->ndev) && | 
|  | qed_info->mf_mode != QED_MF_NPAR && qed_info->tx_switching) { | 
|  | struct qed_update_vport_params params; | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  | params.vport_id = 0; | 
|  | params.update_tx_switching_flg = 1; | 
|  | params.tx_switching_flg = num_vfs_param ? 1 : 0; | 
|  | edev->ops->vport_update(edev->cdev, ¶ms); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static struct pci_driver qede_pci_driver = { | 
|  | .name = "qede", | 
|  | .id_table = qede_pci_tbl, | 
|  | .probe = qede_probe, | 
|  | .remove = qede_remove, | 
|  | .shutdown = qede_shutdown, | 
|  | #ifdef CONFIG_QED_SRIOV | 
|  | .sriov_configure = qede_sriov_configure, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static void qede_force_mac(void *dev, u8 *mac, bool forced) | 
|  | { | 
|  | struct qede_dev *edev = dev; | 
|  |  | 
|  | /* MAC hints take effect only if we haven't set one already */ | 
|  | if (is_valid_ether_addr(edev->ndev->dev_addr) && !forced) | 
|  | return; | 
|  |  | 
|  | ether_addr_copy(edev->ndev->dev_addr, mac); | 
|  | ether_addr_copy(edev->primary_mac, mac); | 
|  | } | 
|  |  | 
|  | static struct qed_eth_cb_ops qede_ll_ops = { | 
|  | { | 
|  | .link_update = qede_link_update, | 
|  | }, | 
|  | .force_mac = qede_force_mac, | 
|  | }; | 
|  |  | 
|  | static int qede_netdev_event(struct notifier_block *this, unsigned long event, | 
|  | void *ptr) | 
|  | { | 
|  | struct net_device *ndev = netdev_notifier_info_to_dev(ptr); | 
|  | struct ethtool_drvinfo drvinfo; | 
|  | struct qede_dev *edev; | 
|  |  | 
|  | if (event != NETDEV_CHANGENAME && event != NETDEV_CHANGEADDR) | 
|  | goto done; | 
|  |  | 
|  | /* Check whether this is a qede device */ | 
|  | if (!ndev || !ndev->ethtool_ops || !ndev->ethtool_ops->get_drvinfo) | 
|  | goto done; | 
|  |  | 
|  | memset(&drvinfo, 0, sizeof(drvinfo)); | 
|  | ndev->ethtool_ops->get_drvinfo(ndev, &drvinfo); | 
|  | if (strcmp(drvinfo.driver, "qede")) | 
|  | goto done; | 
|  | edev = netdev_priv(ndev); | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_CHANGENAME: | 
|  | /* Notify qed of the name change */ | 
|  | if (!edev->ops || !edev->ops->common) | 
|  | goto done; | 
|  | edev->ops->common->set_id(edev->cdev, edev->ndev->name, "qede"); | 
|  | break; | 
|  | case NETDEV_CHANGEADDR: | 
|  | edev = netdev_priv(ndev); | 
|  | qede_roce_event_changeaddr(edev); | 
|  | break; | 
|  | } | 
|  |  | 
|  | done: | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block qede_netdev_notifier = { | 
|  | .notifier_call = qede_netdev_event, | 
|  | }; | 
|  |  | 
|  | static | 
|  | int __init qede_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | pr_info("qede_init: %s\n", version); | 
|  |  | 
|  | qed_ops = qed_get_eth_ops(); | 
|  | if (!qed_ops) { | 
|  | pr_notice("Failed to get qed ethtool operations\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Must register notifier before pci ops, since we might miss | 
|  | * interface rename after pci probe and netdev registeration. | 
|  | */ | 
|  | ret = register_netdevice_notifier(&qede_netdev_notifier); | 
|  | if (ret) { | 
|  | pr_notice("Failed to register netdevice_notifier\n"); | 
|  | qed_put_eth_ops(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = pci_register_driver(&qede_pci_driver); | 
|  | if (ret) { | 
|  | pr_notice("Failed to register driver\n"); | 
|  | unregister_netdevice_notifier(&qede_netdev_notifier); | 
|  | qed_put_eth_ops(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit qede_cleanup(void) | 
|  | { | 
|  | if (debug & QED_LOG_INFO_MASK) | 
|  | pr_info("qede_cleanup called\n"); | 
|  |  | 
|  | unregister_netdevice_notifier(&qede_netdev_notifier); | 
|  | pci_unregister_driver(&qede_pci_driver); | 
|  | qed_put_eth_ops(); | 
|  | } | 
|  |  | 
|  | module_init(qede_init); | 
|  | module_exit(qede_cleanup); | 
|  |  | 
|  | /* ------------------------------------------------------------------------- | 
|  | * START OF FAST-PATH | 
|  | * ------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | /* Unmap the data and free skb */ | 
|  | static int qede_free_tx_pkt(struct qede_dev *edev, | 
|  | struct qede_tx_queue *txq, int *len) | 
|  | { | 
|  | u16 idx = txq->sw_tx_cons & NUM_TX_BDS_MAX; | 
|  | struct sk_buff *skb = txq->sw_tx_ring.skbs[idx].skb; | 
|  | struct eth_tx_1st_bd *first_bd; | 
|  | struct eth_tx_bd *tx_data_bd; | 
|  | int bds_consumed = 0; | 
|  | int nbds; | 
|  | bool data_split = txq->sw_tx_ring.skbs[idx].flags & QEDE_TSO_SPLIT_BD; | 
|  | int i, split_bd_len = 0; | 
|  |  | 
|  | if (unlikely(!skb)) { | 
|  | DP_ERR(edev, | 
|  | "skb is null for txq idx=%d txq->sw_tx_cons=%d txq->sw_tx_prod=%d\n", | 
|  | idx, txq->sw_tx_cons, txq->sw_tx_prod); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *len = skb->len; | 
|  |  | 
|  | first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl); | 
|  |  | 
|  | bds_consumed++; | 
|  |  | 
|  | nbds = first_bd->data.nbds; | 
|  |  | 
|  | if (data_split) { | 
|  | struct eth_tx_bd *split = (struct eth_tx_bd *) | 
|  | qed_chain_consume(&txq->tx_pbl); | 
|  | split_bd_len = BD_UNMAP_LEN(split); | 
|  | bds_consumed++; | 
|  | } | 
|  | dma_unmap_single(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd), | 
|  | BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE); | 
|  |  | 
|  | /* Unmap the data of the skb frags */ | 
|  | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, bds_consumed++) { | 
|  | tx_data_bd = (struct eth_tx_bd *) | 
|  | qed_chain_consume(&txq->tx_pbl); | 
|  | dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(tx_data_bd), | 
|  | BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE); | 
|  | } | 
|  |  | 
|  | while (bds_consumed++ < nbds) | 
|  | qed_chain_consume(&txq->tx_pbl); | 
|  |  | 
|  | /* Free skb */ | 
|  | dev_kfree_skb_any(skb); | 
|  | txq->sw_tx_ring.skbs[idx].skb = NULL; | 
|  | txq->sw_tx_ring.skbs[idx].flags = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Unmap the data and free skb when mapping failed during start_xmit */ | 
|  | static void qede_free_failed_tx_pkt(struct qede_tx_queue *txq, | 
|  | struct eth_tx_1st_bd *first_bd, | 
|  | int nbd, bool data_split) | 
|  | { | 
|  | u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX; | 
|  | struct sk_buff *skb = txq->sw_tx_ring.skbs[idx].skb; | 
|  | struct eth_tx_bd *tx_data_bd; | 
|  | int i, split_bd_len = 0; | 
|  |  | 
|  | /* Return prod to its position before this skb was handled */ | 
|  | qed_chain_set_prod(&txq->tx_pbl, | 
|  | le16_to_cpu(txq->tx_db.data.bd_prod), first_bd); | 
|  |  | 
|  | first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl); | 
|  |  | 
|  | if (data_split) { | 
|  | struct eth_tx_bd *split = (struct eth_tx_bd *) | 
|  | qed_chain_produce(&txq->tx_pbl); | 
|  | split_bd_len = BD_UNMAP_LEN(split); | 
|  | nbd--; | 
|  | } | 
|  |  | 
|  | dma_unmap_single(txq->dev, BD_UNMAP_ADDR(first_bd), | 
|  | BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE); | 
|  |  | 
|  | /* Unmap the data of the skb frags */ | 
|  | for (i = 0; i < nbd; i++) { | 
|  | tx_data_bd = (struct eth_tx_bd *) | 
|  | qed_chain_produce(&txq->tx_pbl); | 
|  | if (tx_data_bd->nbytes) | 
|  | dma_unmap_page(txq->dev, | 
|  | BD_UNMAP_ADDR(tx_data_bd), | 
|  | BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE); | 
|  | } | 
|  |  | 
|  | /* Return again prod to its position before this skb was handled */ | 
|  | qed_chain_set_prod(&txq->tx_pbl, | 
|  | le16_to_cpu(txq->tx_db.data.bd_prod), first_bd); | 
|  |  | 
|  | /* Free skb */ | 
|  | dev_kfree_skb_any(skb); | 
|  | txq->sw_tx_ring.skbs[idx].skb = NULL; | 
|  | txq->sw_tx_ring.skbs[idx].flags = 0; | 
|  | } | 
|  |  | 
|  | static u32 qede_xmit_type(struct sk_buff *skb, int *ipv6_ext) | 
|  | { | 
|  | u32 rc = XMIT_L4_CSUM; | 
|  | __be16 l3_proto; | 
|  |  | 
|  | if (skb->ip_summed != CHECKSUM_PARTIAL) | 
|  | return XMIT_PLAIN; | 
|  |  | 
|  | l3_proto = vlan_get_protocol(skb); | 
|  | if (l3_proto == htons(ETH_P_IPV6) && | 
|  | (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6)) | 
|  | *ipv6_ext = 1; | 
|  |  | 
|  | if (skb->encapsulation) { | 
|  | rc |= XMIT_ENC; | 
|  | if (skb_is_gso(skb)) { | 
|  | unsigned short gso_type = skb_shinfo(skb)->gso_type; | 
|  |  | 
|  | if ((gso_type & SKB_GSO_UDP_TUNNEL_CSUM) || | 
|  | (gso_type & SKB_GSO_GRE_CSUM)) | 
|  | rc |= XMIT_ENC_GSO_L4_CSUM; | 
|  |  | 
|  | rc |= XMIT_LSO; | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (skb_is_gso(skb)) | 
|  | rc |= XMIT_LSO; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_set_params_for_ipv6_ext(struct sk_buff *skb, | 
|  | struct eth_tx_2nd_bd *second_bd, | 
|  | struct eth_tx_3rd_bd *third_bd) | 
|  | { | 
|  | u8 l4_proto; | 
|  | u16 bd2_bits1 = 0, bd2_bits2 = 0; | 
|  |  | 
|  | bd2_bits1 |= (1 << ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT); | 
|  |  | 
|  | bd2_bits2 |= ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) & | 
|  | ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK) | 
|  | << ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT; | 
|  |  | 
|  | bd2_bits1 |= (ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH << | 
|  | ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT); | 
|  |  | 
|  | if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) | 
|  | l4_proto = ipv6_hdr(skb)->nexthdr; | 
|  | else | 
|  | l4_proto = ip_hdr(skb)->protocol; | 
|  |  | 
|  | if (l4_proto == IPPROTO_UDP) | 
|  | bd2_bits1 |= 1 << ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT; | 
|  |  | 
|  | if (third_bd) | 
|  | third_bd->data.bitfields |= | 
|  | cpu_to_le16(((tcp_hdrlen(skb) / 4) & | 
|  | ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK) << | 
|  | ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT); | 
|  |  | 
|  | second_bd->data.bitfields1 = cpu_to_le16(bd2_bits1); | 
|  | second_bd->data.bitfields2 = cpu_to_le16(bd2_bits2); | 
|  | } | 
|  |  | 
|  | static int map_frag_to_bd(struct qede_tx_queue *txq, | 
|  | skb_frag_t *frag, struct eth_tx_bd *bd) | 
|  | { | 
|  | dma_addr_t mapping; | 
|  |  | 
|  | /* Map skb non-linear frag data for DMA */ | 
|  | mapping = skb_frag_dma_map(txq->dev, frag, 0, | 
|  | skb_frag_size(frag), DMA_TO_DEVICE); | 
|  | if (unlikely(dma_mapping_error(txq->dev, mapping))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Setup the data pointer of the frag data */ | 
|  | BD_SET_UNMAP_ADDR_LEN(bd, mapping, skb_frag_size(frag)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 qede_get_skb_hlen(struct sk_buff *skb, bool is_encap_pkt) | 
|  | { | 
|  | if (is_encap_pkt) | 
|  | return (skb_inner_transport_header(skb) + | 
|  | inner_tcp_hdrlen(skb) - skb->data); | 
|  | else | 
|  | return (skb_transport_header(skb) + | 
|  | tcp_hdrlen(skb) - skb->data); | 
|  | } | 
|  |  | 
|  | /* +2 for 1st BD for headers and 2nd BD for headlen (if required) */ | 
|  | #if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET) | 
|  | static bool qede_pkt_req_lin(struct sk_buff *skb, u8 xmit_type) | 
|  | { | 
|  | int allowed_frags = ETH_TX_MAX_BDS_PER_NON_LSO_PACKET - 1; | 
|  |  | 
|  | if (xmit_type & XMIT_LSO) { | 
|  | int hlen; | 
|  |  | 
|  | hlen = qede_get_skb_hlen(skb, xmit_type & XMIT_ENC); | 
|  |  | 
|  | /* linear payload would require its own BD */ | 
|  | if (skb_headlen(skb) > hlen) | 
|  | allowed_frags--; | 
|  | } | 
|  |  | 
|  | return (skb_shinfo(skb)->nr_frags > allowed_frags); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static inline void qede_update_tx_producer(struct qede_tx_queue *txq) | 
|  | { | 
|  | /* wmb makes sure that the BDs data is updated before updating the | 
|  | * producer, otherwise FW may read old data from the BDs. | 
|  | */ | 
|  | wmb(); | 
|  | barrier(); | 
|  | writel(txq->tx_db.raw, txq->doorbell_addr); | 
|  |  | 
|  | /* mmiowb is needed to synchronize doorbell writes from more than one | 
|  | * processor. It guarantees that the write arrives to the device before | 
|  | * the queue lock is released and another start_xmit is called (possibly | 
|  | * on another CPU). Without this barrier, the next doorbell can bypass | 
|  | * this doorbell. This is applicable to IA64/Altix systems. | 
|  | */ | 
|  | mmiowb(); | 
|  | } | 
|  |  | 
|  | static int qede_xdp_xmit(struct qede_dev *edev, struct qede_fastpath *fp, | 
|  | struct sw_rx_data *metadata, u16 padding, u16 length) | 
|  | { | 
|  | struct qede_tx_queue *txq = fp->xdp_tx; | 
|  | u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX; | 
|  | struct eth_tx_1st_bd *first_bd; | 
|  |  | 
|  | if (!qed_chain_get_elem_left(&txq->tx_pbl)) { | 
|  | txq->stopped_cnt++; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl); | 
|  |  | 
|  | memset(first_bd, 0, sizeof(*first_bd)); | 
|  | first_bd->data.bd_flags.bitfields = | 
|  | BIT(ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT); | 
|  | first_bd->data.bitfields |= | 
|  | (length & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) << | 
|  | ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT; | 
|  | first_bd->data.nbds = 1; | 
|  |  | 
|  | /* We can safely ignore the offset, as it's 0 for XDP */ | 
|  | BD_SET_UNMAP_ADDR_LEN(first_bd, metadata->mapping + padding, length); | 
|  |  | 
|  | /* Synchronize the buffer back to device, as program [probably] | 
|  | * has changed it. | 
|  | */ | 
|  | dma_sync_single_for_device(&edev->pdev->dev, | 
|  | metadata->mapping + padding, | 
|  | length, PCI_DMA_TODEVICE); | 
|  |  | 
|  | txq->sw_tx_ring.pages[idx] = metadata->data; | 
|  | txq->sw_tx_prod++; | 
|  |  | 
|  | /* Mark the fastpath for future XDP doorbell */ | 
|  | fp->xdp_xmit = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Main transmit function */ | 
|  | static netdev_tx_t qede_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *ndev) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  | struct netdev_queue *netdev_txq; | 
|  | struct qede_tx_queue *txq; | 
|  | struct eth_tx_1st_bd *first_bd; | 
|  | struct eth_tx_2nd_bd *second_bd = NULL; | 
|  | struct eth_tx_3rd_bd *third_bd = NULL; | 
|  | struct eth_tx_bd *tx_data_bd = NULL; | 
|  | u16 txq_index; | 
|  | u8 nbd = 0; | 
|  | dma_addr_t mapping; | 
|  | int rc, frag_idx = 0, ipv6_ext = 0; | 
|  | u8 xmit_type; | 
|  | u16 idx; | 
|  | u16 hlen; | 
|  | bool data_split = false; | 
|  |  | 
|  | /* Get tx-queue context and netdev index */ | 
|  | txq_index = skb_get_queue_mapping(skb); | 
|  | WARN_ON(txq_index >= QEDE_TSS_COUNT(edev)); | 
|  | txq = edev->fp_array[edev->fp_num_rx + txq_index].txq; | 
|  | netdev_txq = netdev_get_tx_queue(ndev, txq_index); | 
|  |  | 
|  | WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) < (MAX_SKB_FRAGS + 1)); | 
|  |  | 
|  | xmit_type = qede_xmit_type(skb, &ipv6_ext); | 
|  |  | 
|  | #if ((MAX_SKB_FRAGS + 2) > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET) | 
|  | if (qede_pkt_req_lin(skb, xmit_type)) { | 
|  | if (skb_linearize(skb)) { | 
|  | DP_NOTICE(edev, | 
|  | "SKB linearization failed - silently dropping this SKB\n"); | 
|  | dev_kfree_skb_any(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* Fill the entry in the SW ring and the BDs in the FW ring */ | 
|  | idx = txq->sw_tx_prod & NUM_TX_BDS_MAX; | 
|  | txq->sw_tx_ring.skbs[idx].skb = skb; | 
|  | first_bd = (struct eth_tx_1st_bd *) | 
|  | qed_chain_produce(&txq->tx_pbl); | 
|  | memset(first_bd, 0, sizeof(*first_bd)); | 
|  | first_bd->data.bd_flags.bitfields = | 
|  | 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT; | 
|  |  | 
|  | /* Map skb linear data for DMA and set in the first BD */ | 
|  | mapping = dma_map_single(txq->dev, skb->data, | 
|  | skb_headlen(skb), DMA_TO_DEVICE); | 
|  | if (unlikely(dma_mapping_error(txq->dev, mapping))) { | 
|  | DP_NOTICE(edev, "SKB mapping failed\n"); | 
|  | qede_free_failed_tx_pkt(txq, first_bd, 0, false); | 
|  | qede_update_tx_producer(txq); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | nbd++; | 
|  | BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb)); | 
|  |  | 
|  | /* In case there is IPv6 with extension headers or LSO we need 2nd and | 
|  | * 3rd BDs. | 
|  | */ | 
|  | if (unlikely((xmit_type & XMIT_LSO) | ipv6_ext)) { | 
|  | second_bd = (struct eth_tx_2nd_bd *) | 
|  | qed_chain_produce(&txq->tx_pbl); | 
|  | memset(second_bd, 0, sizeof(*second_bd)); | 
|  |  | 
|  | nbd++; | 
|  | third_bd = (struct eth_tx_3rd_bd *) | 
|  | qed_chain_produce(&txq->tx_pbl); | 
|  | memset(third_bd, 0, sizeof(*third_bd)); | 
|  |  | 
|  | nbd++; | 
|  | /* We need to fill in additional data in second_bd... */ | 
|  | tx_data_bd = (struct eth_tx_bd *)second_bd; | 
|  | } | 
|  |  | 
|  | if (skb_vlan_tag_present(skb)) { | 
|  | first_bd->data.vlan = cpu_to_le16(skb_vlan_tag_get(skb)); | 
|  | first_bd->data.bd_flags.bitfields |= | 
|  | 1 << ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT; | 
|  | } | 
|  |  | 
|  | /* Fill the parsing flags & params according to the requested offload */ | 
|  | if (xmit_type & XMIT_L4_CSUM) { | 
|  | /* We don't re-calculate IP checksum as it is already done by | 
|  | * the upper stack | 
|  | */ | 
|  | first_bd->data.bd_flags.bitfields |= | 
|  | 1 << ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT; | 
|  |  | 
|  | if (xmit_type & XMIT_ENC) { | 
|  | first_bd->data.bd_flags.bitfields |= | 
|  | 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT; | 
|  | first_bd->data.bitfields |= | 
|  | 1 << ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT; | 
|  | } | 
|  |  | 
|  | /* Legacy FW had flipped behavior in regard to this bit - | 
|  | * I.e., needed to set to prevent FW from touching encapsulated | 
|  | * packets when it didn't need to. | 
|  | */ | 
|  | if (unlikely(txq->is_legacy)) | 
|  | first_bd->data.bitfields ^= | 
|  | 1 << ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT; | 
|  |  | 
|  | /* If the packet is IPv6 with extension header, indicate that | 
|  | * to FW and pass few params, since the device cracker doesn't | 
|  | * support parsing IPv6 with extension header/s. | 
|  | */ | 
|  | if (unlikely(ipv6_ext)) | 
|  | qede_set_params_for_ipv6_ext(skb, second_bd, third_bd); | 
|  | } | 
|  |  | 
|  | if (xmit_type & XMIT_LSO) { | 
|  | first_bd->data.bd_flags.bitfields |= | 
|  | (1 << ETH_TX_1ST_BD_FLAGS_LSO_SHIFT); | 
|  | third_bd->data.lso_mss = | 
|  | cpu_to_le16(skb_shinfo(skb)->gso_size); | 
|  |  | 
|  | if (unlikely(xmit_type & XMIT_ENC)) { | 
|  | first_bd->data.bd_flags.bitfields |= | 
|  | 1 << ETH_TX_1ST_BD_FLAGS_TUNN_IP_CSUM_SHIFT; | 
|  |  | 
|  | if (xmit_type & XMIT_ENC_GSO_L4_CSUM) { | 
|  | u8 tmp = ETH_TX_1ST_BD_FLAGS_TUNN_L4_CSUM_SHIFT; | 
|  |  | 
|  | first_bd->data.bd_flags.bitfields |= 1 << tmp; | 
|  | } | 
|  | hlen = qede_get_skb_hlen(skb, true); | 
|  | } else { | 
|  | first_bd->data.bd_flags.bitfields |= | 
|  | 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT; | 
|  | hlen = qede_get_skb_hlen(skb, false); | 
|  | } | 
|  |  | 
|  | /* @@@TBD - if will not be removed need to check */ | 
|  | third_bd->data.bitfields |= | 
|  | cpu_to_le16((1 << ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT)); | 
|  |  | 
|  | /* Make life easier for FW guys who can't deal with header and | 
|  | * data on same BD. If we need to split, use the second bd... | 
|  | */ | 
|  | if (unlikely(skb_headlen(skb) > hlen)) { | 
|  | DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, | 
|  | "TSO split header size is %d (%x:%x)\n", | 
|  | first_bd->nbytes, first_bd->addr.hi, | 
|  | first_bd->addr.lo); | 
|  |  | 
|  | mapping = HILO_U64(le32_to_cpu(first_bd->addr.hi), | 
|  | le32_to_cpu(first_bd->addr.lo)) + | 
|  | hlen; | 
|  |  | 
|  | BD_SET_UNMAP_ADDR_LEN(tx_data_bd, mapping, | 
|  | le16_to_cpu(first_bd->nbytes) - | 
|  | hlen); | 
|  |  | 
|  | /* this marks the BD as one that has no | 
|  | * individual mapping | 
|  | */ | 
|  | txq->sw_tx_ring.skbs[idx].flags |= QEDE_TSO_SPLIT_BD; | 
|  |  | 
|  | first_bd->nbytes = cpu_to_le16(hlen); | 
|  |  | 
|  | tx_data_bd = (struct eth_tx_bd *)third_bd; | 
|  | data_split = true; | 
|  | } | 
|  | } else { | 
|  | first_bd->data.bitfields |= | 
|  | (skb->len & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) << | 
|  | ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT; | 
|  | } | 
|  |  | 
|  | /* Handle fragmented skb */ | 
|  | /* special handle for frags inside 2nd and 3rd bds.. */ | 
|  | while (tx_data_bd && frag_idx < skb_shinfo(skb)->nr_frags) { | 
|  | rc = map_frag_to_bd(txq, | 
|  | &skb_shinfo(skb)->frags[frag_idx], | 
|  | tx_data_bd); | 
|  | if (rc) { | 
|  | qede_free_failed_tx_pkt(txq, first_bd, nbd, data_split); | 
|  | qede_update_tx_producer(txq); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | if (tx_data_bd == (struct eth_tx_bd *)second_bd) | 
|  | tx_data_bd = (struct eth_tx_bd *)third_bd; | 
|  | else | 
|  | tx_data_bd = NULL; | 
|  |  | 
|  | frag_idx++; | 
|  | } | 
|  |  | 
|  | /* map last frags into 4th, 5th .... */ | 
|  | for (; frag_idx < skb_shinfo(skb)->nr_frags; frag_idx++, nbd++) { | 
|  | tx_data_bd = (struct eth_tx_bd *) | 
|  | qed_chain_produce(&txq->tx_pbl); | 
|  |  | 
|  | memset(tx_data_bd, 0, sizeof(*tx_data_bd)); | 
|  |  | 
|  | rc = map_frag_to_bd(txq, | 
|  | &skb_shinfo(skb)->frags[frag_idx], | 
|  | tx_data_bd); | 
|  | if (rc) { | 
|  | qede_free_failed_tx_pkt(txq, first_bd, nbd, data_split); | 
|  | qede_update_tx_producer(txq); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* update the first BD with the actual num BDs */ | 
|  | first_bd->data.nbds = nbd; | 
|  |  | 
|  | netdev_tx_sent_queue(netdev_txq, skb->len); | 
|  |  | 
|  | skb_tx_timestamp(skb); | 
|  |  | 
|  | /* Advance packet producer only before sending the packet since mapping | 
|  | * of pages may fail. | 
|  | */ | 
|  | txq->sw_tx_prod++; | 
|  |  | 
|  | /* 'next page' entries are counted in the producer value */ | 
|  | txq->tx_db.data.bd_prod = | 
|  | cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl)); | 
|  |  | 
|  | if (!skb->xmit_more || netif_xmit_stopped(netdev_txq)) | 
|  | qede_update_tx_producer(txq); | 
|  |  | 
|  | if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl) | 
|  | < (MAX_SKB_FRAGS + 1))) { | 
|  | if (skb->xmit_more) | 
|  | qede_update_tx_producer(txq); | 
|  |  | 
|  | netif_tx_stop_queue(netdev_txq); | 
|  | txq->stopped_cnt++; | 
|  | DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, | 
|  | "Stop queue was called\n"); | 
|  | /* paired memory barrier is in qede_tx_int(), we have to keep | 
|  | * ordering of set_bit() in netif_tx_stop_queue() and read of | 
|  | * fp->bd_tx_cons | 
|  | */ | 
|  | smp_mb(); | 
|  |  | 
|  | if (qed_chain_get_elem_left(&txq->tx_pbl) | 
|  | >= (MAX_SKB_FRAGS + 1) && | 
|  | (edev->state == QEDE_STATE_OPEN)) { | 
|  | netif_tx_wake_queue(netdev_txq); | 
|  | DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, | 
|  | "Wake queue was called\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | int qede_txq_has_work(struct qede_tx_queue *txq) | 
|  | { | 
|  | u16 hw_bd_cons; | 
|  |  | 
|  | /* Tell compiler that consumer and producer can change */ | 
|  | barrier(); | 
|  | hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr); | 
|  | if (qed_chain_get_cons_idx(&txq->tx_pbl) == hw_bd_cons + 1) | 
|  | return 0; | 
|  |  | 
|  | return hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl); | 
|  | } | 
|  |  | 
|  | static void qede_xdp_tx_int(struct qede_dev *edev, struct qede_tx_queue *txq) | 
|  | { | 
|  | struct eth_tx_1st_bd *bd; | 
|  | u16 hw_bd_cons; | 
|  |  | 
|  | hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr); | 
|  | barrier(); | 
|  |  | 
|  | while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) { | 
|  | bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl); | 
|  |  | 
|  | dma_unmap_single(&edev->pdev->dev, BD_UNMAP_ADDR(bd), | 
|  | PAGE_SIZE, DMA_BIDIRECTIONAL); | 
|  | __free_page(txq->sw_tx_ring.pages[txq->sw_tx_cons & | 
|  | NUM_TX_BDS_MAX]); | 
|  |  | 
|  | txq->sw_tx_cons++; | 
|  | txq->xmit_pkts++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int qede_tx_int(struct qede_dev *edev, struct qede_tx_queue *txq) | 
|  | { | 
|  | struct netdev_queue *netdev_txq; | 
|  | u16 hw_bd_cons; | 
|  | unsigned int pkts_compl = 0, bytes_compl = 0; | 
|  | int rc; | 
|  |  | 
|  | netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index); | 
|  |  | 
|  | hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr); | 
|  | barrier(); | 
|  |  | 
|  | while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) { | 
|  | int len = 0; | 
|  |  | 
|  | rc = qede_free_tx_pkt(edev, txq, &len); | 
|  | if (rc) { | 
|  | DP_NOTICE(edev, "hw_bd_cons = %d, chain_cons=%d\n", | 
|  | hw_bd_cons, | 
|  | qed_chain_get_cons_idx(&txq->tx_pbl)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | bytes_compl += len; | 
|  | pkts_compl++; | 
|  | txq->sw_tx_cons++; | 
|  | txq->xmit_pkts++; | 
|  | } | 
|  |  | 
|  | netdev_tx_completed_queue(netdev_txq, pkts_compl, bytes_compl); | 
|  |  | 
|  | /* Need to make the tx_bd_cons update visible to start_xmit() | 
|  | * before checking for netif_tx_queue_stopped().  Without the | 
|  | * memory barrier, there is a small possibility that | 
|  | * start_xmit() will miss it and cause the queue to be stopped | 
|  | * forever. | 
|  | * On the other hand we need an rmb() here to ensure the proper | 
|  | * ordering of bit testing in the following | 
|  | * netif_tx_queue_stopped(txq) call. | 
|  | */ | 
|  | smp_mb(); | 
|  |  | 
|  | if (unlikely(netif_tx_queue_stopped(netdev_txq))) { | 
|  | /* Taking tx_lock is needed to prevent reenabling the queue | 
|  | * while it's empty. This could have happen if rx_action() gets | 
|  | * suspended in qede_tx_int() after the condition before | 
|  | * netif_tx_wake_queue(), while tx_action (qede_start_xmit()): | 
|  | * | 
|  | * stops the queue->sees fresh tx_bd_cons->releases the queue-> | 
|  | * sends some packets consuming the whole queue again-> | 
|  | * stops the queue | 
|  | */ | 
|  |  | 
|  | __netif_tx_lock(netdev_txq, smp_processor_id()); | 
|  |  | 
|  | if ((netif_tx_queue_stopped(netdev_txq)) && | 
|  | (edev->state == QEDE_STATE_OPEN) && | 
|  | (qed_chain_get_elem_left(&txq->tx_pbl) | 
|  | >= (MAX_SKB_FRAGS + 1))) { | 
|  | netif_tx_wake_queue(netdev_txq); | 
|  | DP_VERBOSE(edev, NETIF_MSG_TX_DONE, | 
|  | "Wake queue was called\n"); | 
|  | } | 
|  |  | 
|  | __netif_tx_unlock(netdev_txq); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | bool qede_has_rx_work(struct qede_rx_queue *rxq) | 
|  | { | 
|  | u16 hw_comp_cons, sw_comp_cons; | 
|  |  | 
|  | /* Tell compiler that status block fields can change */ | 
|  | barrier(); | 
|  |  | 
|  | hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr); | 
|  | sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); | 
|  |  | 
|  | return hw_comp_cons != sw_comp_cons; | 
|  | } | 
|  |  | 
|  | static inline void qede_rx_bd_ring_consume(struct qede_rx_queue *rxq) | 
|  | { | 
|  | qed_chain_consume(&rxq->rx_bd_ring); | 
|  | rxq->sw_rx_cons++; | 
|  | } | 
|  |  | 
|  | /* This function reuses the buffer(from an offset) from | 
|  | * consumer index to producer index in the bd ring | 
|  | */ | 
|  | static inline void qede_reuse_page(struct qede_rx_queue *rxq, | 
|  | struct sw_rx_data *curr_cons) | 
|  | { | 
|  | struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring); | 
|  | struct sw_rx_data *curr_prod; | 
|  | dma_addr_t new_mapping; | 
|  |  | 
|  | curr_prod = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX]; | 
|  | *curr_prod = *curr_cons; | 
|  |  | 
|  | new_mapping = curr_prod->mapping + curr_prod->page_offset; | 
|  |  | 
|  | rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(new_mapping)); | 
|  | rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(new_mapping)); | 
|  |  | 
|  | rxq->sw_rx_prod++; | 
|  | curr_cons->data = NULL; | 
|  | } | 
|  |  | 
|  | /* In case of allocation failures reuse buffers | 
|  | * from consumer index to produce buffers for firmware | 
|  | */ | 
|  | void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, u8 count) | 
|  | { | 
|  | struct sw_rx_data *curr_cons; | 
|  |  | 
|  | for (; count > 0; count--) { | 
|  | curr_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX]; | 
|  | qede_reuse_page(rxq, curr_cons); | 
|  | qede_rx_bd_ring_consume(rxq); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int qede_alloc_rx_buffer(struct qede_rx_queue *rxq) | 
|  | { | 
|  | struct sw_rx_data *sw_rx_data; | 
|  | struct eth_rx_bd *rx_bd; | 
|  | dma_addr_t mapping; | 
|  | struct page *data; | 
|  |  | 
|  | data = alloc_pages(GFP_ATOMIC, 0); | 
|  | if (unlikely(!data)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Map the entire page as it would be used | 
|  | * for multiple RX buffer segment size mapping. | 
|  | */ | 
|  | mapping = dma_map_page(rxq->dev, data, 0, | 
|  | PAGE_SIZE, rxq->data_direction); | 
|  | if (unlikely(dma_mapping_error(rxq->dev, mapping))) { | 
|  | __free_page(data); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | sw_rx_data = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX]; | 
|  | sw_rx_data->page_offset = 0; | 
|  | sw_rx_data->data = data; | 
|  | sw_rx_data->mapping = mapping; | 
|  |  | 
|  | /* Advance PROD and get BD pointer */ | 
|  | rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring); | 
|  | WARN_ON(!rx_bd); | 
|  | rx_bd->addr.hi = cpu_to_le32(upper_32_bits(mapping)); | 
|  | rx_bd->addr.lo = cpu_to_le32(lower_32_bits(mapping)); | 
|  |  | 
|  | rxq->sw_rx_prod++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int qede_realloc_rx_buffer(struct qede_rx_queue *rxq, | 
|  | struct sw_rx_data *curr_cons) | 
|  | { | 
|  | /* Move to the next segment in the page */ | 
|  | curr_cons->page_offset += rxq->rx_buf_seg_size; | 
|  |  | 
|  | if (curr_cons->page_offset == PAGE_SIZE) { | 
|  | if (unlikely(qede_alloc_rx_buffer(rxq))) { | 
|  | /* Since we failed to allocate new buffer | 
|  | * current buffer can be used again. | 
|  | */ | 
|  | curr_cons->page_offset -= rxq->rx_buf_seg_size; | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | dma_unmap_page(rxq->dev, curr_cons->mapping, | 
|  | PAGE_SIZE, rxq->data_direction); | 
|  | } else { | 
|  | /* Increment refcount of the page as we don't want | 
|  | * network stack to take the ownership of the page | 
|  | * which can be recycled multiple times by the driver. | 
|  | */ | 
|  | page_ref_inc(curr_cons->data); | 
|  | qede_reuse_page(rxq, curr_cons); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void qede_update_rx_prod(struct qede_dev *edev, struct qede_rx_queue *rxq) | 
|  | { | 
|  | u16 bd_prod = qed_chain_get_prod_idx(&rxq->rx_bd_ring); | 
|  | u16 cqe_prod = qed_chain_get_prod_idx(&rxq->rx_comp_ring); | 
|  | struct eth_rx_prod_data rx_prods = {0}; | 
|  |  | 
|  | /* Update producers */ | 
|  | rx_prods.bd_prod = cpu_to_le16(bd_prod); | 
|  | rx_prods.cqe_prod = cpu_to_le16(cqe_prod); | 
|  |  | 
|  | /* Make sure that the BD and SGE data is updated before updating the | 
|  | * producers since FW might read the BD/SGE right after the producer | 
|  | * is updated. | 
|  | */ | 
|  | wmb(); | 
|  |  | 
|  | internal_ram_wr(rxq->hw_rxq_prod_addr, sizeof(rx_prods), | 
|  | (u32 *)&rx_prods); | 
|  |  | 
|  | /* mmiowb is needed to synchronize doorbell writes from more than one | 
|  | * processor. It guarantees that the write arrives to the device before | 
|  | * the napi lock is released and another qede_poll is called (possibly | 
|  | * on another CPU). Without this barrier, the next doorbell can bypass | 
|  | * this doorbell. This is applicable to IA64/Altix systems. | 
|  | */ | 
|  | mmiowb(); | 
|  | } | 
|  |  | 
|  | static void qede_get_rxhash(struct sk_buff *skb, u8 bitfields, __le32 rss_hash) | 
|  | { | 
|  | enum pkt_hash_types hash_type = PKT_HASH_TYPE_NONE; | 
|  | enum rss_hash_type htype; | 
|  | u32 hash = 0; | 
|  |  | 
|  | htype = GET_FIELD(bitfields, ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE); | 
|  | if (htype) { | 
|  | hash_type = ((htype == RSS_HASH_TYPE_IPV4) || | 
|  | (htype == RSS_HASH_TYPE_IPV6)) ? | 
|  | PKT_HASH_TYPE_L3 : PKT_HASH_TYPE_L4; | 
|  | hash = le32_to_cpu(rss_hash); | 
|  | } | 
|  | skb_set_hash(skb, hash, hash_type); | 
|  | } | 
|  |  | 
|  | static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag) | 
|  | { | 
|  | skb_checksum_none_assert(skb); | 
|  |  | 
|  | if (csum_flag & QEDE_CSUM_UNNECESSARY) | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  |  | 
|  | if (csum_flag & QEDE_TUNN_CSUM_UNNECESSARY) | 
|  | skb->csum_level = 1; | 
|  | } | 
|  |  | 
|  | static inline void qede_skb_receive(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct qede_rx_queue *rxq, | 
|  | struct sk_buff *skb, u16 vlan_tag) | 
|  | { | 
|  | if (vlan_tag) | 
|  | __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); | 
|  |  | 
|  | napi_gro_receive(&fp->napi, skb); | 
|  | fp->rxq->rcv_pkts++; | 
|  | } | 
|  |  | 
|  | static void qede_set_gro_params(struct qede_dev *edev, | 
|  | struct sk_buff *skb, | 
|  | struct eth_fast_path_rx_tpa_start_cqe *cqe) | 
|  | { | 
|  | u16 parsing_flags = le16_to_cpu(cqe->pars_flags.flags); | 
|  |  | 
|  | if (((parsing_flags >> PARSING_AND_ERR_FLAGS_L3TYPE_SHIFT) & | 
|  | PARSING_AND_ERR_FLAGS_L3TYPE_MASK) == 2) | 
|  | skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; | 
|  | else | 
|  | skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; | 
|  |  | 
|  | skb_shinfo(skb)->gso_size = __le16_to_cpu(cqe->len_on_first_bd) - | 
|  | cqe->header_len; | 
|  | } | 
|  |  | 
|  | static int qede_fill_frag_skb(struct qede_dev *edev, | 
|  | struct qede_rx_queue *rxq, | 
|  | u8 tpa_agg_index, u16 len_on_bd) | 
|  | { | 
|  | struct sw_rx_data *current_bd = &rxq->sw_rx_ring[rxq->sw_rx_cons & | 
|  | NUM_RX_BDS_MAX]; | 
|  | struct qede_agg_info *tpa_info = &rxq->tpa_info[tpa_agg_index]; | 
|  | struct sk_buff *skb = tpa_info->skb; | 
|  |  | 
|  | if (unlikely(tpa_info->state != QEDE_AGG_STATE_START)) | 
|  | goto out; | 
|  |  | 
|  | /* Add one frag and update the appropriate fields in the skb */ | 
|  | skb_fill_page_desc(skb, tpa_info->frag_id++, | 
|  | current_bd->data, current_bd->page_offset, | 
|  | len_on_bd); | 
|  |  | 
|  | if (unlikely(qede_realloc_rx_buffer(rxq, current_bd))) { | 
|  | /* Incr page ref count to reuse on allocation failure | 
|  | * so that it doesn't get freed while freeing SKB. | 
|  | */ | 
|  | page_ref_inc(current_bd->data); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | qed_chain_consume(&rxq->rx_bd_ring); | 
|  | rxq->sw_rx_cons++; | 
|  |  | 
|  | skb->data_len += len_on_bd; | 
|  | skb->truesize += rxq->rx_buf_seg_size; | 
|  | skb->len += len_on_bd; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | tpa_info->state = QEDE_AGG_STATE_ERROR; | 
|  | qede_recycle_rx_bd_ring(rxq, 1); | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static void qede_tpa_start(struct qede_dev *edev, | 
|  | struct qede_rx_queue *rxq, | 
|  | struct eth_fast_path_rx_tpa_start_cqe *cqe) | 
|  | { | 
|  | struct qede_agg_info *tpa_info = &rxq->tpa_info[cqe->tpa_agg_index]; | 
|  | struct eth_rx_bd *rx_bd_cons = qed_chain_consume(&rxq->rx_bd_ring); | 
|  | struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring); | 
|  | struct sw_rx_data *replace_buf = &tpa_info->buffer; | 
|  | dma_addr_t mapping = tpa_info->buffer_mapping; | 
|  | struct sw_rx_data *sw_rx_data_cons; | 
|  | struct sw_rx_data *sw_rx_data_prod; | 
|  |  | 
|  | sw_rx_data_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX]; | 
|  | sw_rx_data_prod = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX]; | 
|  |  | 
|  | /* Use pre-allocated replacement buffer - we can't release the agg. | 
|  | * start until its over and we don't want to risk allocation failing | 
|  | * here, so re-allocate when aggregation will be over. | 
|  | */ | 
|  | sw_rx_data_prod->mapping = replace_buf->mapping; | 
|  |  | 
|  | sw_rx_data_prod->data = replace_buf->data; | 
|  | rx_bd_prod->addr.hi = cpu_to_le32(upper_32_bits(mapping)); | 
|  | rx_bd_prod->addr.lo = cpu_to_le32(lower_32_bits(mapping)); | 
|  | sw_rx_data_prod->page_offset = replace_buf->page_offset; | 
|  |  | 
|  | rxq->sw_rx_prod++; | 
|  |  | 
|  | /* move partial skb from cons to pool (don't unmap yet) | 
|  | * save mapping, incase we drop the packet later on. | 
|  | */ | 
|  | tpa_info->buffer = *sw_rx_data_cons; | 
|  | mapping = HILO_U64(le32_to_cpu(rx_bd_cons->addr.hi), | 
|  | le32_to_cpu(rx_bd_cons->addr.lo)); | 
|  |  | 
|  | tpa_info->buffer_mapping = mapping; | 
|  | rxq->sw_rx_cons++; | 
|  |  | 
|  | /* set tpa state to start only if we are able to allocate skb | 
|  | * for this aggregation, otherwise mark as error and aggregation will | 
|  | * be dropped | 
|  | */ | 
|  | tpa_info->skb = netdev_alloc_skb(edev->ndev, | 
|  | le16_to_cpu(cqe->len_on_first_bd)); | 
|  | if (unlikely(!tpa_info->skb)) { | 
|  | DP_NOTICE(edev, "Failed to allocate SKB for gro\n"); | 
|  | tpa_info->state = QEDE_AGG_STATE_ERROR; | 
|  | goto cons_buf; | 
|  | } | 
|  |  | 
|  | /* Start filling in the aggregation info */ | 
|  | skb_put(tpa_info->skb, le16_to_cpu(cqe->len_on_first_bd)); | 
|  | tpa_info->frag_id = 0; | 
|  | tpa_info->state = QEDE_AGG_STATE_START; | 
|  |  | 
|  | /* Store some information from first CQE */ | 
|  | tpa_info->start_cqe_placement_offset = cqe->placement_offset; | 
|  | tpa_info->start_cqe_bd_len = le16_to_cpu(cqe->len_on_first_bd); | 
|  | if ((le16_to_cpu(cqe->pars_flags.flags) >> | 
|  | PARSING_AND_ERR_FLAGS_TAG8021QEXIST_SHIFT) & | 
|  | PARSING_AND_ERR_FLAGS_TAG8021QEXIST_MASK) | 
|  | tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag); | 
|  | else | 
|  | tpa_info->vlan_tag = 0; | 
|  |  | 
|  | qede_get_rxhash(tpa_info->skb, cqe->bitfields, cqe->rss_hash); | 
|  |  | 
|  | /* This is needed in order to enable forwarding support */ | 
|  | qede_set_gro_params(edev, tpa_info->skb, cqe); | 
|  |  | 
|  | cons_buf: /* We still need to handle bd_len_list to consume buffers */ | 
|  | if (likely(cqe->ext_bd_len_list[0])) | 
|  | qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index, | 
|  | le16_to_cpu(cqe->ext_bd_len_list[0])); | 
|  |  | 
|  | if (unlikely(cqe->ext_bd_len_list[1])) { | 
|  | DP_ERR(edev, | 
|  | "Unlikely - got a TPA aggregation with more than one ext_bd_len_list entry in the TPA start\n"); | 
|  | tpa_info->state = QEDE_AGG_STATE_ERROR; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_INET | 
|  | static void qede_gro_ip_csum(struct sk_buff *skb) | 
|  | { | 
|  | const struct iphdr *iph = ip_hdr(skb); | 
|  | struct tcphdr *th; | 
|  |  | 
|  | skb_set_transport_header(skb, sizeof(struct iphdr)); | 
|  | th = tcp_hdr(skb); | 
|  |  | 
|  | th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb), | 
|  | iph->saddr, iph->daddr, 0); | 
|  |  | 
|  | tcp_gro_complete(skb); | 
|  | } | 
|  |  | 
|  | static void qede_gro_ipv6_csum(struct sk_buff *skb) | 
|  | { | 
|  | struct ipv6hdr *iph = ipv6_hdr(skb); | 
|  | struct tcphdr *th; | 
|  |  | 
|  | skb_set_transport_header(skb, sizeof(struct ipv6hdr)); | 
|  | th = tcp_hdr(skb); | 
|  |  | 
|  | th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb), | 
|  | &iph->saddr, &iph->daddr, 0); | 
|  | tcp_gro_complete(skb); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void qede_gro_receive(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct sk_buff *skb, | 
|  | u16 vlan_tag) | 
|  | { | 
|  | /* FW can send a single MTU sized packet from gro flow | 
|  | * due to aggregation timeout/last segment etc. which | 
|  | * is not expected to be a gro packet. If a skb has zero | 
|  | * frags then simply push it in the stack as non gso skb. | 
|  | */ | 
|  | if (unlikely(!skb->data_len)) { | 
|  | skb_shinfo(skb)->gso_type = 0; | 
|  | skb_shinfo(skb)->gso_size = 0; | 
|  | goto send_skb; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_INET | 
|  | if (skb_shinfo(skb)->gso_size) { | 
|  | skb_reset_network_header(skb); | 
|  |  | 
|  | switch (skb->protocol) { | 
|  | case htons(ETH_P_IP): | 
|  | qede_gro_ip_csum(skb); | 
|  | break; | 
|  | case htons(ETH_P_IPV6): | 
|  | qede_gro_ipv6_csum(skb); | 
|  | break; | 
|  | default: | 
|  | DP_ERR(edev, | 
|  | "Error: FW GRO supports only IPv4/IPv6, not 0x%04x\n", | 
|  | ntohs(skb->protocol)); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | send_skb: | 
|  | skb_record_rx_queue(skb, fp->rxq->rxq_id); | 
|  | qede_skb_receive(edev, fp, fp->rxq, skb, vlan_tag); | 
|  | } | 
|  |  | 
|  | static inline void qede_tpa_cont(struct qede_dev *edev, | 
|  | struct qede_rx_queue *rxq, | 
|  | struct eth_fast_path_rx_tpa_cont_cqe *cqe) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; cqe->len_list[i]; i++) | 
|  | qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index, | 
|  | le16_to_cpu(cqe->len_list[i])); | 
|  |  | 
|  | if (unlikely(i > 1)) | 
|  | DP_ERR(edev, | 
|  | "Strange - TPA cont with more than a single len_list entry\n"); | 
|  | } | 
|  |  | 
|  | static void qede_tpa_end(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct eth_fast_path_rx_tpa_end_cqe *cqe) | 
|  | { | 
|  | struct qede_rx_queue *rxq = fp->rxq; | 
|  | struct qede_agg_info *tpa_info; | 
|  | struct sk_buff *skb; | 
|  | int i; | 
|  |  | 
|  | tpa_info = &rxq->tpa_info[cqe->tpa_agg_index]; | 
|  | skb = tpa_info->skb; | 
|  |  | 
|  | for (i = 0; cqe->len_list[i]; i++) | 
|  | qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index, | 
|  | le16_to_cpu(cqe->len_list[i])); | 
|  | if (unlikely(i > 1)) | 
|  | DP_ERR(edev, | 
|  | "Strange - TPA emd with more than a single len_list entry\n"); | 
|  |  | 
|  | if (unlikely(tpa_info->state != QEDE_AGG_STATE_START)) | 
|  | goto err; | 
|  |  | 
|  | /* Sanity */ | 
|  | if (unlikely(cqe->num_of_bds != tpa_info->frag_id + 1)) | 
|  | DP_ERR(edev, | 
|  | "Strange - TPA had %02x BDs, but SKB has only %d frags\n", | 
|  | cqe->num_of_bds, tpa_info->frag_id); | 
|  | if (unlikely(skb->len != le16_to_cpu(cqe->total_packet_len))) | 
|  | DP_ERR(edev, | 
|  | "Strange - total packet len [cqe] is %4x but SKB has len %04x\n", | 
|  | le16_to_cpu(cqe->total_packet_len), skb->len); | 
|  |  | 
|  | memcpy(skb->data, | 
|  | page_address(tpa_info->buffer.data) + | 
|  | tpa_info->start_cqe_placement_offset + | 
|  | tpa_info->buffer.page_offset, tpa_info->start_cqe_bd_len); | 
|  |  | 
|  | /* Finalize the SKB */ | 
|  | skb->protocol = eth_type_trans(skb, edev->ndev); | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  |  | 
|  | /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count | 
|  | * to skb_shinfo(skb)->gso_segs | 
|  | */ | 
|  | NAPI_GRO_CB(skb)->count = le16_to_cpu(cqe->num_of_coalesced_segs); | 
|  |  | 
|  | qede_gro_receive(edev, fp, skb, tpa_info->vlan_tag); | 
|  |  | 
|  | tpa_info->state = QEDE_AGG_STATE_NONE; | 
|  |  | 
|  | return; | 
|  | err: | 
|  | tpa_info->state = QEDE_AGG_STATE_NONE; | 
|  | dev_kfree_skb_any(tpa_info->skb); | 
|  | tpa_info->skb = NULL; | 
|  | } | 
|  |  | 
|  | static bool qede_tunn_exist(u16 flag) | 
|  | { | 
|  | return !!(flag & (PARSING_AND_ERR_FLAGS_TUNNELEXIST_MASK << | 
|  | PARSING_AND_ERR_FLAGS_TUNNELEXIST_SHIFT)); | 
|  | } | 
|  |  | 
|  | static u8 qede_check_tunn_csum(u16 flag) | 
|  | { | 
|  | u16 csum_flag = 0; | 
|  | u8 tcsum = 0; | 
|  |  | 
|  | if (flag & (PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMWASCALCULATED_MASK << | 
|  | PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMWASCALCULATED_SHIFT)) | 
|  | csum_flag |= PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMERROR_MASK << | 
|  | PARSING_AND_ERR_FLAGS_TUNNELL4CHKSMERROR_SHIFT; | 
|  |  | 
|  | if (flag & (PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK << | 
|  | PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT)) { | 
|  | csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK << | 
|  | PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT; | 
|  | tcsum = QEDE_TUNN_CSUM_UNNECESSARY; | 
|  | } | 
|  |  | 
|  | csum_flag |= PARSING_AND_ERR_FLAGS_TUNNELIPHDRERROR_MASK << | 
|  | PARSING_AND_ERR_FLAGS_TUNNELIPHDRERROR_SHIFT | | 
|  | PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK << | 
|  | PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT; | 
|  |  | 
|  | if (csum_flag & flag) | 
|  | return QEDE_CSUM_ERROR; | 
|  |  | 
|  | return QEDE_CSUM_UNNECESSARY | tcsum; | 
|  | } | 
|  |  | 
|  | static u8 qede_check_notunn_csum(u16 flag) | 
|  | { | 
|  | u16 csum_flag = 0; | 
|  | u8 csum = 0; | 
|  |  | 
|  | if (flag & (PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK << | 
|  | PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT)) { | 
|  | csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK << | 
|  | PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT; | 
|  | csum = QEDE_CSUM_UNNECESSARY; | 
|  | } | 
|  |  | 
|  | csum_flag |= PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK << | 
|  | PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT; | 
|  |  | 
|  | if (csum_flag & flag) | 
|  | return QEDE_CSUM_ERROR; | 
|  |  | 
|  | return csum; | 
|  | } | 
|  |  | 
|  | static u8 qede_check_csum(u16 flag) | 
|  | { | 
|  | if (!qede_tunn_exist(flag)) | 
|  | return qede_check_notunn_csum(flag); | 
|  | else | 
|  | return qede_check_tunn_csum(flag); | 
|  | } | 
|  |  | 
|  | static bool qede_pkt_is_ip_fragmented(struct eth_fast_path_rx_reg_cqe *cqe, | 
|  | u16 flag) | 
|  | { | 
|  | u8 tun_pars_flg = cqe->tunnel_pars_flags.flags; | 
|  |  | 
|  | if ((tun_pars_flg & (ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_MASK << | 
|  | ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_SHIFT)) || | 
|  | (flag & (PARSING_AND_ERR_FLAGS_IPV4FRAG_MASK << | 
|  | PARSING_AND_ERR_FLAGS_IPV4FRAG_SHIFT))) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* Return true iff packet is to be passed to stack */ | 
|  | static bool qede_rx_xdp(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct qede_rx_queue *rxq, | 
|  | struct bpf_prog *prog, | 
|  | struct sw_rx_data *bd, | 
|  | struct eth_fast_path_rx_reg_cqe *cqe) | 
|  | { | 
|  | u16 len = le16_to_cpu(cqe->len_on_first_bd); | 
|  | struct xdp_buff xdp; | 
|  | enum xdp_action act; | 
|  |  | 
|  | xdp.data = page_address(bd->data) + cqe->placement_offset; | 
|  | xdp.data_end = xdp.data + len; | 
|  |  | 
|  | /* Queues always have a full reset currently, so for the time | 
|  | * being until there's atomic program replace just mark read | 
|  | * side for map helpers. | 
|  | */ | 
|  | rcu_read_lock(); | 
|  | act = bpf_prog_run_xdp(prog, &xdp); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (act == XDP_PASS) | 
|  | return true; | 
|  |  | 
|  | /* Count number of packets not to be passed to stack */ | 
|  | rxq->xdp_no_pass++; | 
|  |  | 
|  | switch (act) { | 
|  | case XDP_TX: | 
|  | /* We need the replacement buffer before transmit. */ | 
|  | if (qede_alloc_rx_buffer(rxq)) { | 
|  | qede_recycle_rx_bd_ring(rxq, 1); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* Now if there's a transmission problem, we'd still have to | 
|  | * throw current buffer, as replacement was already allocated. | 
|  | */ | 
|  | if (qede_xdp_xmit(edev, fp, bd, cqe->placement_offset, len)) { | 
|  | dma_unmap_page(rxq->dev, bd->mapping, | 
|  | PAGE_SIZE, DMA_BIDIRECTIONAL); | 
|  | __free_page(bd->data); | 
|  | } | 
|  |  | 
|  | /* Regardless, we've consumed an Rx BD */ | 
|  | qede_rx_bd_ring_consume(rxq); | 
|  | return false; | 
|  |  | 
|  | default: | 
|  | bpf_warn_invalid_xdp_action(act); | 
|  | case XDP_ABORTED: | 
|  | case XDP_DROP: | 
|  | qede_recycle_rx_bd_ring(rxq, cqe->bd_num); | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *qede_rx_allocate_skb(struct qede_dev *edev, | 
|  | struct qede_rx_queue *rxq, | 
|  | struct sw_rx_data *bd, u16 len, | 
|  | u16 pad) | 
|  | { | 
|  | unsigned int offset = bd->page_offset; | 
|  | struct skb_frag_struct *frag; | 
|  | struct page *page = bd->data; | 
|  | unsigned int pull_len; | 
|  | struct sk_buff *skb; | 
|  | unsigned char *va; | 
|  |  | 
|  | /* Allocate a new SKB with a sufficient large header len */ | 
|  | skb = netdev_alloc_skb(edev->ndev, QEDE_RX_HDR_SIZE); | 
|  | if (unlikely(!skb)) | 
|  | return NULL; | 
|  |  | 
|  | /* Copy data into SKB - if it's small, we can simply copy it and | 
|  | * re-use the already allcoated & mapped memory. | 
|  | */ | 
|  | if (len + pad <= edev->rx_copybreak) { | 
|  | memcpy(skb_put(skb, len), | 
|  | page_address(page) + pad + offset, len); | 
|  | qede_reuse_page(rxq, bd); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | frag = &skb_shinfo(skb)->frags[0]; | 
|  |  | 
|  | skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, | 
|  | page, pad + offset, len, rxq->rx_buf_seg_size); | 
|  |  | 
|  | va = skb_frag_address(frag); | 
|  | pull_len = eth_get_headlen(va, QEDE_RX_HDR_SIZE); | 
|  |  | 
|  | /* Align the pull_len to optimize memcpy */ | 
|  | memcpy(skb->data, va, ALIGN(pull_len, sizeof(long))); | 
|  |  | 
|  | /* Correct the skb & frag sizes offset after the pull */ | 
|  | skb_frag_size_sub(frag, pull_len); | 
|  | frag->page_offset += pull_len; | 
|  | skb->data_len -= pull_len; | 
|  | skb->tail += pull_len; | 
|  |  | 
|  | if (unlikely(qede_realloc_rx_buffer(rxq, bd))) { | 
|  | /* Incr page ref count to reuse on allocation failure so | 
|  | * that it doesn't get freed while freeing SKB [as its | 
|  | * already mapped there]. | 
|  | */ | 
|  | page_ref_inc(page); | 
|  | dev_kfree_skb_any(skb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | out: | 
|  | /* We've consumed the first BD and prepared an SKB */ | 
|  | qede_rx_bd_ring_consume(rxq); | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static int qede_rx_build_jumbo(struct qede_dev *edev, | 
|  | struct qede_rx_queue *rxq, | 
|  | struct sk_buff *skb, | 
|  | struct eth_fast_path_rx_reg_cqe *cqe, | 
|  | u16 first_bd_len) | 
|  | { | 
|  | u16 pkt_len = le16_to_cpu(cqe->pkt_len); | 
|  | struct sw_rx_data *bd; | 
|  | u16 bd_cons_idx; | 
|  | u8 num_frags; | 
|  |  | 
|  | pkt_len -= first_bd_len; | 
|  |  | 
|  | /* We've already used one BD for the SKB. Now take care of the rest */ | 
|  | for (num_frags = cqe->bd_num - 1; num_frags > 0; num_frags--) { | 
|  | u16 cur_size = pkt_len > rxq->rx_buf_size ? rxq->rx_buf_size : | 
|  | pkt_len; | 
|  |  | 
|  | if (unlikely(!cur_size)) { | 
|  | DP_ERR(edev, | 
|  | "Still got %d BDs for mapping jumbo, but length became 0\n", | 
|  | num_frags); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* We need a replacement buffer for each BD */ | 
|  | if (unlikely(qede_alloc_rx_buffer(rxq))) | 
|  | goto out; | 
|  |  | 
|  | /* Now that we've allocated the replacement buffer, | 
|  | * we can safely consume the next BD and map it to the SKB. | 
|  | */ | 
|  | bd_cons_idx = rxq->sw_rx_cons & NUM_RX_BDS_MAX; | 
|  | bd = &rxq->sw_rx_ring[bd_cons_idx]; | 
|  | qede_rx_bd_ring_consume(rxq); | 
|  |  | 
|  | dma_unmap_page(rxq->dev, bd->mapping, | 
|  | PAGE_SIZE, DMA_FROM_DEVICE); | 
|  |  | 
|  | skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags++, | 
|  | bd->data, 0, cur_size); | 
|  |  | 
|  | skb->truesize += PAGE_SIZE; | 
|  | skb->data_len += cur_size; | 
|  | skb->len += cur_size; | 
|  | pkt_len -= cur_size; | 
|  | } | 
|  |  | 
|  | if (unlikely(pkt_len)) | 
|  | DP_ERR(edev, | 
|  | "Mapped all BDs of jumbo, but still have %d bytes\n", | 
|  | pkt_len); | 
|  |  | 
|  | out: | 
|  | return num_frags; | 
|  | } | 
|  |  | 
|  | static int qede_rx_process_tpa_cqe(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct qede_rx_queue *rxq, | 
|  | union eth_rx_cqe *cqe, | 
|  | enum eth_rx_cqe_type type) | 
|  | { | 
|  | switch (type) { | 
|  | case ETH_RX_CQE_TYPE_TPA_START: | 
|  | qede_tpa_start(edev, rxq, &cqe->fast_path_tpa_start); | 
|  | return 0; | 
|  | case ETH_RX_CQE_TYPE_TPA_CONT: | 
|  | qede_tpa_cont(edev, rxq, &cqe->fast_path_tpa_cont); | 
|  | return 0; | 
|  | case ETH_RX_CQE_TYPE_TPA_END: | 
|  | qede_tpa_end(edev, fp, &cqe->fast_path_tpa_end); | 
|  | return 1; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int qede_rx_process_cqe(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct qede_rx_queue *rxq) | 
|  | { | 
|  | struct bpf_prog *xdp_prog = READ_ONCE(rxq->xdp_prog); | 
|  | struct eth_fast_path_rx_reg_cqe *fp_cqe; | 
|  | u16 len, pad, bd_cons_idx, parse_flag; | 
|  | enum eth_rx_cqe_type cqe_type; | 
|  | union eth_rx_cqe *cqe; | 
|  | struct sw_rx_data *bd; | 
|  | struct sk_buff *skb; | 
|  | __le16 flags; | 
|  | u8 csum_flag; | 
|  |  | 
|  | /* Get the CQE from the completion ring */ | 
|  | cqe = (union eth_rx_cqe *)qed_chain_consume(&rxq->rx_comp_ring); | 
|  | cqe_type = cqe->fast_path_regular.type; | 
|  |  | 
|  | /* Process an unlikely slowpath event */ | 
|  | if (unlikely(cqe_type == ETH_RX_CQE_TYPE_SLOW_PATH)) { | 
|  | struct eth_slow_path_rx_cqe *sp_cqe; | 
|  |  | 
|  | sp_cqe = (struct eth_slow_path_rx_cqe *)cqe; | 
|  | edev->ops->eth_cqe_completion(edev->cdev, fp->id, sp_cqe); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Handle TPA cqes */ | 
|  | if (cqe_type != ETH_RX_CQE_TYPE_REGULAR) | 
|  | return qede_rx_process_tpa_cqe(edev, fp, rxq, cqe, cqe_type); | 
|  |  | 
|  | /* Get the data from the SW ring; Consume it only after it's evident | 
|  | * we wouldn't recycle it. | 
|  | */ | 
|  | bd_cons_idx = rxq->sw_rx_cons & NUM_RX_BDS_MAX; | 
|  | bd = &rxq->sw_rx_ring[bd_cons_idx]; | 
|  |  | 
|  | fp_cqe = &cqe->fast_path_regular; | 
|  | len = le16_to_cpu(fp_cqe->len_on_first_bd); | 
|  | pad = fp_cqe->placement_offset; | 
|  |  | 
|  | /* Run eBPF program if one is attached */ | 
|  | if (xdp_prog) | 
|  | if (!qede_rx_xdp(edev, fp, rxq, xdp_prog, bd, fp_cqe)) | 
|  | return 1; | 
|  |  | 
|  | /* If this is an error packet then drop it */ | 
|  | flags = cqe->fast_path_regular.pars_flags.flags; | 
|  | parse_flag = le16_to_cpu(flags); | 
|  |  | 
|  | csum_flag = qede_check_csum(parse_flag); | 
|  | if (unlikely(csum_flag == QEDE_CSUM_ERROR)) { | 
|  | if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) { | 
|  | rxq->rx_ip_frags++; | 
|  | } else { | 
|  | DP_NOTICE(edev, | 
|  | "CQE has error, flags = %x, dropping incoming packet\n", | 
|  | parse_flag); | 
|  | rxq->rx_hw_errors++; | 
|  | qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Basic validation passed; Need to prepare an SKB. This would also | 
|  | * guarantee to finally consume the first BD upon success. | 
|  | */ | 
|  | skb = qede_rx_allocate_skb(edev, rxq, bd, len, pad); | 
|  | if (!skb) { | 
|  | rxq->rx_alloc_errors++; | 
|  | qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* In case of Jumbo packet, several PAGE_SIZEd buffers will be pointed | 
|  | * by a single cqe. | 
|  | */ | 
|  | if (fp_cqe->bd_num > 1) { | 
|  | u16 unmapped_frags = qede_rx_build_jumbo(edev, rxq, skb, | 
|  | fp_cqe, len); | 
|  |  | 
|  | if (unlikely(unmapped_frags > 0)) { | 
|  | qede_recycle_rx_bd_ring(rxq, unmapped_frags); | 
|  | dev_kfree_skb_any(skb); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* The SKB contains all the data. Now prepare meta-magic */ | 
|  | skb->protocol = eth_type_trans(skb, edev->ndev); | 
|  | qede_get_rxhash(skb, fp_cqe->bitfields, fp_cqe->rss_hash); | 
|  | qede_set_skb_csum(skb, csum_flag); | 
|  | skb_record_rx_queue(skb, rxq->rxq_id); | 
|  |  | 
|  | /* SKB is prepared - pass it to stack */ | 
|  | qede_skb_receive(edev, fp, rxq, skb, le16_to_cpu(fp_cqe->vlan_tag)); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int qede_rx_int(struct qede_fastpath *fp, int budget) | 
|  | { | 
|  | struct qede_rx_queue *rxq = fp->rxq; | 
|  | struct qede_dev *edev = fp->edev; | 
|  | u16 hw_comp_cons, sw_comp_cons; | 
|  | int work_done = 0; | 
|  |  | 
|  | hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr); | 
|  | sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); | 
|  |  | 
|  | /* Memory barrier to prevent the CPU from doing speculative reads of CQE | 
|  | * / BD in the while-loop before reading hw_comp_cons. If the CQE is | 
|  | * read before it is written by FW, then FW writes CQE and SB, and then | 
|  | * the CPU reads the hw_comp_cons, it will use an old CQE. | 
|  | */ | 
|  | rmb(); | 
|  |  | 
|  | /* Loop to complete all indicated BDs */ | 
|  | while ((sw_comp_cons != hw_comp_cons) && (work_done < budget)) { | 
|  | qede_rx_process_cqe(edev, fp, rxq); | 
|  | qed_chain_recycle_consumed(&rxq->rx_comp_ring); | 
|  | sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); | 
|  | work_done++; | 
|  | } | 
|  |  | 
|  | /* Update producers */ | 
|  | qede_update_rx_prod(edev, rxq); | 
|  |  | 
|  | return work_done; | 
|  | } | 
|  |  | 
|  | static bool qede_poll_is_more_work(struct qede_fastpath *fp) | 
|  | { | 
|  | qed_sb_update_sb_idx(fp->sb_info); | 
|  |  | 
|  | /* *_has_*_work() reads the status block, thus we need to ensure that | 
|  | * status block indices have been actually read (qed_sb_update_sb_idx) | 
|  | * prior to this check (*_has_*_work) so that we won't write the | 
|  | * "newer" value of the status block to HW (if there was a DMA right | 
|  | * after qede_has_rx_work and if there is no rmb, the memory reading | 
|  | * (qed_sb_update_sb_idx) may be postponed to right before *_ack_sb). | 
|  | * In this case there will never be another interrupt until there is | 
|  | * another update of the status block, while there is still unhandled | 
|  | * work. | 
|  | */ | 
|  | rmb(); | 
|  |  | 
|  | if (likely(fp->type & QEDE_FASTPATH_RX)) | 
|  | if (qede_has_rx_work(fp->rxq)) | 
|  | return true; | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_XDP) | 
|  | if (qede_txq_has_work(fp->xdp_tx)) | 
|  | return true; | 
|  |  | 
|  | if (likely(fp->type & QEDE_FASTPATH_TX)) | 
|  | if (qede_txq_has_work(fp->txq)) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int qede_poll(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct qede_fastpath *fp = container_of(napi, struct qede_fastpath, | 
|  | napi); | 
|  | struct qede_dev *edev = fp->edev; | 
|  | int rx_work_done = 0; | 
|  |  | 
|  | if (likely(fp->type & QEDE_FASTPATH_TX) && qede_txq_has_work(fp->txq)) | 
|  | qede_tx_int(edev, fp->txq); | 
|  |  | 
|  | if ((fp->type & QEDE_FASTPATH_XDP) && qede_txq_has_work(fp->xdp_tx)) | 
|  | qede_xdp_tx_int(edev, fp->xdp_tx); | 
|  |  | 
|  | rx_work_done = (likely(fp->type & QEDE_FASTPATH_RX) && | 
|  | qede_has_rx_work(fp->rxq)) ? | 
|  | qede_rx_int(fp, budget) : 0; | 
|  | if (rx_work_done < budget) { | 
|  | if (!qede_poll_is_more_work(fp)) { | 
|  | napi_complete(napi); | 
|  |  | 
|  | /* Update and reenable interrupts */ | 
|  | qed_sb_ack(fp->sb_info, IGU_INT_ENABLE, 1); | 
|  | } else { | 
|  | rx_work_done = budget; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fp->xdp_xmit) { | 
|  | u16 xdp_prod = qed_chain_get_prod_idx(&fp->xdp_tx->tx_pbl); | 
|  |  | 
|  | fp->xdp_xmit = 0; | 
|  | fp->xdp_tx->tx_db.data.bd_prod = cpu_to_le16(xdp_prod); | 
|  | qede_update_tx_producer(fp->xdp_tx); | 
|  | } | 
|  |  | 
|  | return rx_work_done; | 
|  | } | 
|  |  | 
|  | static irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie) | 
|  | { | 
|  | struct qede_fastpath *fp = fp_cookie; | 
|  |  | 
|  | qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/); | 
|  |  | 
|  | napi_schedule_irqoff(&fp->napi); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------- | 
|  | * END OF FAST-PATH | 
|  | * ------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static int qede_open(struct net_device *ndev); | 
|  | static int qede_close(struct net_device *ndev); | 
|  | static int qede_set_mac_addr(struct net_device *ndev, void *p); | 
|  | static void qede_set_rx_mode(struct net_device *ndev); | 
|  | static void qede_config_rx_mode(struct net_device *ndev); | 
|  |  | 
|  | static int qede_set_ucast_rx_mac(struct qede_dev *edev, | 
|  | enum qed_filter_xcast_params_type opcode, | 
|  | unsigned char mac[ETH_ALEN]) | 
|  | { | 
|  | struct qed_filter_params filter_cmd; | 
|  |  | 
|  | memset(&filter_cmd, 0, sizeof(filter_cmd)); | 
|  | filter_cmd.type = QED_FILTER_TYPE_UCAST; | 
|  | filter_cmd.filter.ucast.type = opcode; | 
|  | filter_cmd.filter.ucast.mac_valid = 1; | 
|  | ether_addr_copy(filter_cmd.filter.ucast.mac, mac); | 
|  |  | 
|  | return edev->ops->filter_config(edev->cdev, &filter_cmd); | 
|  | } | 
|  |  | 
|  | static int qede_set_ucast_rx_vlan(struct qede_dev *edev, | 
|  | enum qed_filter_xcast_params_type opcode, | 
|  | u16 vid) | 
|  | { | 
|  | struct qed_filter_params filter_cmd; | 
|  |  | 
|  | memset(&filter_cmd, 0, sizeof(filter_cmd)); | 
|  | filter_cmd.type = QED_FILTER_TYPE_UCAST; | 
|  | filter_cmd.filter.ucast.type = opcode; | 
|  | filter_cmd.filter.ucast.vlan_valid = 1; | 
|  | filter_cmd.filter.ucast.vlan = vid; | 
|  |  | 
|  | return edev->ops->filter_config(edev->cdev, &filter_cmd); | 
|  | } | 
|  |  | 
|  | void qede_fill_by_demand_stats(struct qede_dev *edev) | 
|  | { | 
|  | struct qed_eth_stats stats; | 
|  |  | 
|  | edev->ops->get_vport_stats(edev->cdev, &stats); | 
|  | edev->stats.no_buff_discards = stats.no_buff_discards; | 
|  | edev->stats.packet_too_big_discard = stats.packet_too_big_discard; | 
|  | edev->stats.ttl0_discard = stats.ttl0_discard; | 
|  | edev->stats.rx_ucast_bytes = stats.rx_ucast_bytes; | 
|  | edev->stats.rx_mcast_bytes = stats.rx_mcast_bytes; | 
|  | edev->stats.rx_bcast_bytes = stats.rx_bcast_bytes; | 
|  | edev->stats.rx_ucast_pkts = stats.rx_ucast_pkts; | 
|  | edev->stats.rx_mcast_pkts = stats.rx_mcast_pkts; | 
|  | edev->stats.rx_bcast_pkts = stats.rx_bcast_pkts; | 
|  | edev->stats.mftag_filter_discards = stats.mftag_filter_discards; | 
|  | edev->stats.mac_filter_discards = stats.mac_filter_discards; | 
|  |  | 
|  | edev->stats.tx_ucast_bytes = stats.tx_ucast_bytes; | 
|  | edev->stats.tx_mcast_bytes = stats.tx_mcast_bytes; | 
|  | edev->stats.tx_bcast_bytes = stats.tx_bcast_bytes; | 
|  | edev->stats.tx_ucast_pkts = stats.tx_ucast_pkts; | 
|  | edev->stats.tx_mcast_pkts = stats.tx_mcast_pkts; | 
|  | edev->stats.tx_bcast_pkts = stats.tx_bcast_pkts; | 
|  | edev->stats.tx_err_drop_pkts = stats.tx_err_drop_pkts; | 
|  | edev->stats.coalesced_pkts = stats.tpa_coalesced_pkts; | 
|  | edev->stats.coalesced_events = stats.tpa_coalesced_events; | 
|  | edev->stats.coalesced_aborts_num = stats.tpa_aborts_num; | 
|  | edev->stats.non_coalesced_pkts = stats.tpa_not_coalesced_pkts; | 
|  | edev->stats.coalesced_bytes = stats.tpa_coalesced_bytes; | 
|  |  | 
|  | edev->stats.rx_64_byte_packets = stats.rx_64_byte_packets; | 
|  | edev->stats.rx_65_to_127_byte_packets = stats.rx_65_to_127_byte_packets; | 
|  | edev->stats.rx_128_to_255_byte_packets = | 
|  | stats.rx_128_to_255_byte_packets; | 
|  | edev->stats.rx_256_to_511_byte_packets = | 
|  | stats.rx_256_to_511_byte_packets; | 
|  | edev->stats.rx_512_to_1023_byte_packets = | 
|  | stats.rx_512_to_1023_byte_packets; | 
|  | edev->stats.rx_1024_to_1518_byte_packets = | 
|  | stats.rx_1024_to_1518_byte_packets; | 
|  | edev->stats.rx_1519_to_1522_byte_packets = | 
|  | stats.rx_1519_to_1522_byte_packets; | 
|  | edev->stats.rx_1519_to_2047_byte_packets = | 
|  | stats.rx_1519_to_2047_byte_packets; | 
|  | edev->stats.rx_2048_to_4095_byte_packets = | 
|  | stats.rx_2048_to_4095_byte_packets; | 
|  | edev->stats.rx_4096_to_9216_byte_packets = | 
|  | stats.rx_4096_to_9216_byte_packets; | 
|  | edev->stats.rx_9217_to_16383_byte_packets = | 
|  | stats.rx_9217_to_16383_byte_packets; | 
|  | edev->stats.rx_crc_errors = stats.rx_crc_errors; | 
|  | edev->stats.rx_mac_crtl_frames = stats.rx_mac_crtl_frames; | 
|  | edev->stats.rx_pause_frames = stats.rx_pause_frames; | 
|  | edev->stats.rx_pfc_frames = stats.rx_pfc_frames; | 
|  | edev->stats.rx_align_errors = stats.rx_align_errors; | 
|  | edev->stats.rx_carrier_errors = stats.rx_carrier_errors; | 
|  | edev->stats.rx_oversize_packets = stats.rx_oversize_packets; | 
|  | edev->stats.rx_jabbers = stats.rx_jabbers; | 
|  | edev->stats.rx_undersize_packets = stats.rx_undersize_packets; | 
|  | edev->stats.rx_fragments = stats.rx_fragments; | 
|  | edev->stats.tx_64_byte_packets = stats.tx_64_byte_packets; | 
|  | edev->stats.tx_65_to_127_byte_packets = stats.tx_65_to_127_byte_packets; | 
|  | edev->stats.tx_128_to_255_byte_packets = | 
|  | stats.tx_128_to_255_byte_packets; | 
|  | edev->stats.tx_256_to_511_byte_packets = | 
|  | stats.tx_256_to_511_byte_packets; | 
|  | edev->stats.tx_512_to_1023_byte_packets = | 
|  | stats.tx_512_to_1023_byte_packets; | 
|  | edev->stats.tx_1024_to_1518_byte_packets = | 
|  | stats.tx_1024_to_1518_byte_packets; | 
|  | edev->stats.tx_1519_to_2047_byte_packets = | 
|  | stats.tx_1519_to_2047_byte_packets; | 
|  | edev->stats.tx_2048_to_4095_byte_packets = | 
|  | stats.tx_2048_to_4095_byte_packets; | 
|  | edev->stats.tx_4096_to_9216_byte_packets = | 
|  | stats.tx_4096_to_9216_byte_packets; | 
|  | edev->stats.tx_9217_to_16383_byte_packets = | 
|  | stats.tx_9217_to_16383_byte_packets; | 
|  | edev->stats.tx_pause_frames = stats.tx_pause_frames; | 
|  | edev->stats.tx_pfc_frames = stats.tx_pfc_frames; | 
|  | edev->stats.tx_lpi_entry_count = stats.tx_lpi_entry_count; | 
|  | edev->stats.tx_total_collisions = stats.tx_total_collisions; | 
|  | edev->stats.brb_truncates = stats.brb_truncates; | 
|  | edev->stats.brb_discards = stats.brb_discards; | 
|  | edev->stats.tx_mac_ctrl_frames = stats.tx_mac_ctrl_frames; | 
|  | } | 
|  |  | 
|  | static | 
|  | struct rtnl_link_stats64 *qede_get_stats64(struct net_device *dev, | 
|  | struct rtnl_link_stats64 *stats) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  |  | 
|  | qede_fill_by_demand_stats(edev); | 
|  |  | 
|  | stats->rx_packets = edev->stats.rx_ucast_pkts + | 
|  | edev->stats.rx_mcast_pkts + | 
|  | edev->stats.rx_bcast_pkts; | 
|  | stats->tx_packets = edev->stats.tx_ucast_pkts + | 
|  | edev->stats.tx_mcast_pkts + | 
|  | edev->stats.tx_bcast_pkts; | 
|  |  | 
|  | stats->rx_bytes = edev->stats.rx_ucast_bytes + | 
|  | edev->stats.rx_mcast_bytes + | 
|  | edev->stats.rx_bcast_bytes; | 
|  |  | 
|  | stats->tx_bytes = edev->stats.tx_ucast_bytes + | 
|  | edev->stats.tx_mcast_bytes + | 
|  | edev->stats.tx_bcast_bytes; | 
|  |  | 
|  | stats->tx_errors = edev->stats.tx_err_drop_pkts; | 
|  | stats->multicast = edev->stats.rx_mcast_pkts + | 
|  | edev->stats.rx_bcast_pkts; | 
|  |  | 
|  | stats->rx_fifo_errors = edev->stats.no_buff_discards; | 
|  |  | 
|  | stats->collisions = edev->stats.tx_total_collisions; | 
|  | stats->rx_crc_errors = edev->stats.rx_crc_errors; | 
|  | stats->rx_frame_errors = edev->stats.rx_align_errors; | 
|  |  | 
|  | return stats; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_QED_SRIOV | 
|  | static int qede_get_vf_config(struct net_device *dev, int vfidx, | 
|  | struct ifla_vf_info *ivi) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  |  | 
|  | if (!edev->ops) | 
|  | return -EINVAL; | 
|  |  | 
|  | return edev->ops->iov->get_config(edev->cdev, vfidx, ivi); | 
|  | } | 
|  |  | 
|  | static int qede_set_vf_rate(struct net_device *dev, int vfidx, | 
|  | int min_tx_rate, int max_tx_rate) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  |  | 
|  | return edev->ops->iov->set_rate(edev->cdev, vfidx, min_tx_rate, | 
|  | max_tx_rate); | 
|  | } | 
|  |  | 
|  | static int qede_set_vf_spoofchk(struct net_device *dev, int vfidx, bool val) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  |  | 
|  | if (!edev->ops) | 
|  | return -EINVAL; | 
|  |  | 
|  | return edev->ops->iov->set_spoof(edev->cdev, vfidx, val); | 
|  | } | 
|  |  | 
|  | static int qede_set_vf_link_state(struct net_device *dev, int vfidx, | 
|  | int link_state) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  |  | 
|  | if (!edev->ops) | 
|  | return -EINVAL; | 
|  |  | 
|  | return edev->ops->iov->set_link_state(edev->cdev, vfidx, link_state); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void qede_config_accept_any_vlan(struct qede_dev *edev, bool action) | 
|  | { | 
|  | struct qed_update_vport_params params; | 
|  | int rc; | 
|  |  | 
|  | /* Proceed only if action actually needs to be performed */ | 
|  | if (edev->accept_any_vlan == action) | 
|  | return; | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  |  | 
|  | params.vport_id = 0; | 
|  | params.accept_any_vlan = action; | 
|  | params.update_accept_any_vlan_flg = 1; | 
|  |  | 
|  | rc = edev->ops->vport_update(edev->cdev, ¶ms); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Failed to %s accept-any-vlan\n", | 
|  | action ? "enable" : "disable"); | 
|  | } else { | 
|  | DP_INFO(edev, "%s accept-any-vlan\n", | 
|  | action ? "enabled" : "disabled"); | 
|  | edev->accept_any_vlan = action; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int qede_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  | struct qede_vlan *vlan, *tmp; | 
|  | int rc = 0; | 
|  |  | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFUP, "Adding vlan 0x%04x\n", vid); | 
|  |  | 
|  | vlan = kzalloc(sizeof(*vlan), GFP_KERNEL); | 
|  | if (!vlan) { | 
|  | DP_INFO(edev, "Failed to allocate struct for vlan\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | INIT_LIST_HEAD(&vlan->list); | 
|  | vlan->vid = vid; | 
|  | vlan->configured = false; | 
|  |  | 
|  | /* Verify vlan isn't already configured */ | 
|  | list_for_each_entry(tmp, &edev->vlan_list, list) { | 
|  | if (tmp->vid == vlan->vid) { | 
|  | DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN), | 
|  | "vlan already configured\n"); | 
|  | kfree(vlan); | 
|  | return -EEXIST; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If interface is down, cache this VLAN ID and return */ | 
|  | __qede_lock(edev); | 
|  | if (edev->state != QEDE_STATE_OPEN) { | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFDOWN, | 
|  | "Interface is down, VLAN %d will be configured when interface is up\n", | 
|  | vid); | 
|  | if (vid != 0) | 
|  | edev->non_configured_vlans++; | 
|  | list_add(&vlan->list, &edev->vlan_list); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Check for the filter limit. | 
|  | * Note - vlan0 has a reserved filter and can be added without | 
|  | * worrying about quota | 
|  | */ | 
|  | if ((edev->configured_vlans < edev->dev_info.num_vlan_filters) || | 
|  | (vlan->vid == 0)) { | 
|  | rc = qede_set_ucast_rx_vlan(edev, | 
|  | QED_FILTER_XCAST_TYPE_ADD, | 
|  | vlan->vid); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Failed to configure VLAN %d\n", | 
|  | vlan->vid); | 
|  | kfree(vlan); | 
|  | goto out; | 
|  | } | 
|  | vlan->configured = true; | 
|  |  | 
|  | /* vlan0 filter isn't consuming out of our quota */ | 
|  | if (vlan->vid != 0) | 
|  | edev->configured_vlans++; | 
|  | } else { | 
|  | /* Out of quota; Activate accept-any-VLAN mode */ | 
|  | if (!edev->non_configured_vlans) | 
|  | qede_config_accept_any_vlan(edev, true); | 
|  |  | 
|  | edev->non_configured_vlans++; | 
|  | } | 
|  |  | 
|  | list_add(&vlan->list, &edev->vlan_list); | 
|  |  | 
|  | out: | 
|  | __qede_unlock(edev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_del_vlan_from_list(struct qede_dev *edev, | 
|  | struct qede_vlan *vlan) | 
|  | { | 
|  | /* vlan0 filter isn't consuming out of our quota */ | 
|  | if (vlan->vid != 0) { | 
|  | if (vlan->configured) | 
|  | edev->configured_vlans--; | 
|  | else | 
|  | edev->non_configured_vlans--; | 
|  | } | 
|  |  | 
|  | list_del(&vlan->list); | 
|  | kfree(vlan); | 
|  | } | 
|  |  | 
|  | static int qede_configure_vlan_filters(struct qede_dev *edev) | 
|  | { | 
|  | int rc = 0, real_rc = 0, accept_any_vlan = 0; | 
|  | struct qed_dev_eth_info *dev_info; | 
|  | struct qede_vlan *vlan = NULL; | 
|  |  | 
|  | if (list_empty(&edev->vlan_list)) | 
|  | return 0; | 
|  |  | 
|  | dev_info = &edev->dev_info; | 
|  |  | 
|  | /* Configure non-configured vlans */ | 
|  | list_for_each_entry(vlan, &edev->vlan_list, list) { | 
|  | if (vlan->configured) | 
|  | continue; | 
|  |  | 
|  | /* We have used all our credits, now enable accept_any_vlan */ | 
|  | if ((vlan->vid != 0) && | 
|  | (edev->configured_vlans == dev_info->num_vlan_filters)) { | 
|  | accept_any_vlan = 1; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFUP, "Adding vlan %d\n", vlan->vid); | 
|  |  | 
|  | rc = qede_set_ucast_rx_vlan(edev, QED_FILTER_XCAST_TYPE_ADD, | 
|  | vlan->vid); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Failed to configure VLAN %u\n", | 
|  | vlan->vid); | 
|  | real_rc = rc; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | vlan->configured = true; | 
|  | /* vlan0 filter doesn't consume our VLAN filter's quota */ | 
|  | if (vlan->vid != 0) { | 
|  | edev->non_configured_vlans--; | 
|  | edev->configured_vlans++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* enable accept_any_vlan mode if we have more VLANs than credits, | 
|  | * or remove accept_any_vlan mode if we've actually removed | 
|  | * a non-configured vlan, and all remaining vlans are truly configured. | 
|  | */ | 
|  |  | 
|  | if (accept_any_vlan) | 
|  | qede_config_accept_any_vlan(edev, true); | 
|  | else if (!edev->non_configured_vlans) | 
|  | qede_config_accept_any_vlan(edev, false); | 
|  |  | 
|  | return real_rc; | 
|  | } | 
|  |  | 
|  | static int qede_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  | struct qede_vlan *vlan = NULL; | 
|  | int rc = 0; | 
|  |  | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFDOWN, "Removing vlan 0x%04x\n", vid); | 
|  |  | 
|  | /* Find whether entry exists */ | 
|  | __qede_lock(edev); | 
|  | list_for_each_entry(vlan, &edev->vlan_list, list) | 
|  | if (vlan->vid == vid) | 
|  | break; | 
|  |  | 
|  | if (!vlan || (vlan->vid != vid)) { | 
|  | DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN), | 
|  | "Vlan isn't configured\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (edev->state != QEDE_STATE_OPEN) { | 
|  | /* As interface is already down, we don't have a VPORT | 
|  | * instance to remove vlan filter. So just update vlan list | 
|  | */ | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFDOWN, | 
|  | "Interface is down, removing VLAN from list only\n"); | 
|  | qede_del_vlan_from_list(edev, vlan); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Remove vlan */ | 
|  | if (vlan->configured) { | 
|  | rc = qede_set_ucast_rx_vlan(edev, QED_FILTER_XCAST_TYPE_DEL, | 
|  | vid); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Failed to remove VLAN %d\n", vid); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | qede_del_vlan_from_list(edev, vlan); | 
|  |  | 
|  | /* We have removed a VLAN - try to see if we can | 
|  | * configure non-configured VLAN from the list. | 
|  | */ | 
|  | rc = qede_configure_vlan_filters(edev); | 
|  |  | 
|  | out: | 
|  | __qede_unlock(edev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_vlan_mark_nonconfigured(struct qede_dev *edev) | 
|  | { | 
|  | struct qede_vlan *vlan = NULL; | 
|  |  | 
|  | if (list_empty(&edev->vlan_list)) | 
|  | return; | 
|  |  | 
|  | list_for_each_entry(vlan, &edev->vlan_list, list) { | 
|  | if (!vlan->configured) | 
|  | continue; | 
|  |  | 
|  | vlan->configured = false; | 
|  |  | 
|  | /* vlan0 filter isn't consuming out of our quota */ | 
|  | if (vlan->vid != 0) { | 
|  | edev->non_configured_vlans++; | 
|  | edev->configured_vlans--; | 
|  | } | 
|  |  | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFDOWN, | 
|  | "marked vlan %d as non-configured\n", vlan->vid); | 
|  | } | 
|  |  | 
|  | edev->accept_any_vlan = false; | 
|  | } | 
|  |  | 
|  | static void qede_set_features_reload(struct qede_dev *edev, | 
|  | struct qede_reload_args *args) | 
|  | { | 
|  | edev->ndev->features = args->u.features; | 
|  | } | 
|  |  | 
|  | int qede_set_features(struct net_device *dev, netdev_features_t features) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  | netdev_features_t changes = features ^ dev->features; | 
|  | bool need_reload = false; | 
|  |  | 
|  | /* No action needed if hardware GRO is disabled during driver load */ | 
|  | if (changes & NETIF_F_GRO) { | 
|  | if (dev->features & NETIF_F_GRO) | 
|  | need_reload = !edev->gro_disable; | 
|  | else | 
|  | need_reload = edev->gro_disable; | 
|  | } | 
|  |  | 
|  | if (need_reload) { | 
|  | struct qede_reload_args args; | 
|  |  | 
|  | args.u.features = features; | 
|  | args.func = &qede_set_features_reload; | 
|  |  | 
|  | /* Make sure that we definitely need to reload. | 
|  | * In case of an eBPF attached program, there will be no FW | 
|  | * aggregations, so no need to actually reload. | 
|  | */ | 
|  | __qede_lock(edev); | 
|  | if (edev->xdp_prog) | 
|  | args.func(edev, &args); | 
|  | else | 
|  | qede_reload(edev, &args, true); | 
|  | __qede_unlock(edev); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qede_udp_tunnel_add(struct net_device *dev, | 
|  | struct udp_tunnel_info *ti) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  | u16 t_port = ntohs(ti->port); | 
|  |  | 
|  | switch (ti->type) { | 
|  | case UDP_TUNNEL_TYPE_VXLAN: | 
|  | if (edev->vxlan_dst_port) | 
|  | return; | 
|  |  | 
|  | edev->vxlan_dst_port = t_port; | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_DEBUG, "Added vxlan port=%d\n", | 
|  | t_port); | 
|  |  | 
|  | set_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags); | 
|  | break; | 
|  | case UDP_TUNNEL_TYPE_GENEVE: | 
|  | if (edev->geneve_dst_port) | 
|  | return; | 
|  |  | 
|  | edev->geneve_dst_port = t_port; | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_DEBUG, "Added geneve port=%d\n", | 
|  | t_port); | 
|  | set_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags); | 
|  | break; | 
|  | default: | 
|  | return; | 
|  | } | 
|  |  | 
|  | schedule_delayed_work(&edev->sp_task, 0); | 
|  | } | 
|  |  | 
|  | static void qede_udp_tunnel_del(struct net_device *dev, | 
|  | struct udp_tunnel_info *ti) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  | u16 t_port = ntohs(ti->port); | 
|  |  | 
|  | switch (ti->type) { | 
|  | case UDP_TUNNEL_TYPE_VXLAN: | 
|  | if (t_port != edev->vxlan_dst_port) | 
|  | return; | 
|  |  | 
|  | edev->vxlan_dst_port = 0; | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_DEBUG, "Deleted vxlan port=%d\n", | 
|  | t_port); | 
|  |  | 
|  | set_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags); | 
|  | break; | 
|  | case UDP_TUNNEL_TYPE_GENEVE: | 
|  | if (t_port != edev->geneve_dst_port) | 
|  | return; | 
|  |  | 
|  | edev->geneve_dst_port = 0; | 
|  |  | 
|  | DP_VERBOSE(edev, QED_MSG_DEBUG, "Deleted geneve port=%d\n", | 
|  | t_port); | 
|  | set_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags); | 
|  | break; | 
|  | default: | 
|  | return; | 
|  | } | 
|  |  | 
|  | schedule_delayed_work(&edev->sp_task, 0); | 
|  | } | 
|  |  | 
|  | /* 8B udp header + 8B base tunnel header + 32B option length */ | 
|  | #define QEDE_MAX_TUN_HDR_LEN 48 | 
|  |  | 
|  | static netdev_features_t qede_features_check(struct sk_buff *skb, | 
|  | struct net_device *dev, | 
|  | netdev_features_t features) | 
|  | { | 
|  | if (skb->encapsulation) { | 
|  | u8 l4_proto = 0; | 
|  |  | 
|  | switch (vlan_get_protocol(skb)) { | 
|  | case htons(ETH_P_IP): | 
|  | l4_proto = ip_hdr(skb)->protocol; | 
|  | break; | 
|  | case htons(ETH_P_IPV6): | 
|  | l4_proto = ipv6_hdr(skb)->nexthdr; | 
|  | break; | 
|  | default: | 
|  | return features; | 
|  | } | 
|  |  | 
|  | /* Disable offloads for geneve tunnels, as HW can't parse | 
|  | * the geneve header which has option length greater than 32B. | 
|  | */ | 
|  | if ((l4_proto == IPPROTO_UDP) && | 
|  | ((skb_inner_mac_header(skb) - | 
|  | skb_transport_header(skb)) > QEDE_MAX_TUN_HDR_LEN)) | 
|  | return features & ~(NETIF_F_CSUM_MASK | | 
|  | NETIF_F_GSO_MASK); | 
|  | } | 
|  |  | 
|  | return features; | 
|  | } | 
|  |  | 
|  | static void qede_xdp_reload_func(struct qede_dev *edev, | 
|  | struct qede_reload_args *args) | 
|  | { | 
|  | struct bpf_prog *old; | 
|  |  | 
|  | old = xchg(&edev->xdp_prog, args->u.new_prog); | 
|  | if (old) | 
|  | bpf_prog_put(old); | 
|  | } | 
|  |  | 
|  | static int qede_xdp_set(struct qede_dev *edev, struct bpf_prog *prog) | 
|  | { | 
|  | struct qede_reload_args args; | 
|  |  | 
|  | if (prog && prog->xdp_adjust_head) { | 
|  | DP_ERR(edev, "Does not support bpf_xdp_adjust_head()\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | /* If we're called, there was already a bpf reference increment */ | 
|  | args.func = &qede_xdp_reload_func; | 
|  | args.u.new_prog = prog; | 
|  | qede_reload(edev, &args, false); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qede_xdp(struct net_device *dev, struct netdev_xdp *xdp) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(dev); | 
|  |  | 
|  | switch (xdp->command) { | 
|  | case XDP_SETUP_PROG: | 
|  | return qede_xdp_set(edev, xdp->prog); | 
|  | case XDP_QUERY_PROG: | 
|  | xdp->prog_attached = !!edev->xdp_prog; | 
|  | return 0; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops qede_netdev_ops = { | 
|  | .ndo_open = qede_open, | 
|  | .ndo_stop = qede_close, | 
|  | .ndo_start_xmit = qede_start_xmit, | 
|  | .ndo_set_rx_mode = qede_set_rx_mode, | 
|  | .ndo_set_mac_address = qede_set_mac_addr, | 
|  | .ndo_validate_addr = eth_validate_addr, | 
|  | .ndo_change_mtu = qede_change_mtu, | 
|  | #ifdef CONFIG_QED_SRIOV | 
|  | .ndo_set_vf_mac = qede_set_vf_mac, | 
|  | .ndo_set_vf_vlan = qede_set_vf_vlan, | 
|  | #endif | 
|  | .ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid, | 
|  | .ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid, | 
|  | .ndo_set_features = qede_set_features, | 
|  | .ndo_get_stats64 = qede_get_stats64, | 
|  | #ifdef CONFIG_QED_SRIOV | 
|  | .ndo_set_vf_link_state = qede_set_vf_link_state, | 
|  | .ndo_set_vf_spoofchk = qede_set_vf_spoofchk, | 
|  | .ndo_get_vf_config = qede_get_vf_config, | 
|  | .ndo_set_vf_rate = qede_set_vf_rate, | 
|  | #endif | 
|  | .ndo_udp_tunnel_add = qede_udp_tunnel_add, | 
|  | .ndo_udp_tunnel_del = qede_udp_tunnel_del, | 
|  | .ndo_features_check = qede_features_check, | 
|  | .ndo_xdp = qede_xdp, | 
|  | }; | 
|  |  | 
|  | /* ------------------------------------------------------------------------- | 
|  | * START OF PROBE / REMOVE | 
|  | * ------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev, | 
|  | struct pci_dev *pdev, | 
|  | struct qed_dev_eth_info *info, | 
|  | u32 dp_module, u8 dp_level) | 
|  | { | 
|  | struct net_device *ndev; | 
|  | struct qede_dev *edev; | 
|  |  | 
|  | ndev = alloc_etherdev_mqs(sizeof(*edev), | 
|  | info->num_queues, info->num_queues); | 
|  | if (!ndev) { | 
|  | pr_err("etherdev allocation failed\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | edev = netdev_priv(ndev); | 
|  | edev->ndev = ndev; | 
|  | edev->cdev = cdev; | 
|  | edev->pdev = pdev; | 
|  | edev->dp_module = dp_module; | 
|  | edev->dp_level = dp_level; | 
|  | edev->ops = qed_ops; | 
|  | edev->q_num_rx_buffers = NUM_RX_BDS_DEF; | 
|  | edev->q_num_tx_buffers = NUM_TX_BDS_DEF; | 
|  |  | 
|  | DP_INFO(edev, "Allocated netdev with %d tx queues and %d rx queues\n", | 
|  | info->num_queues, info->num_queues); | 
|  |  | 
|  | SET_NETDEV_DEV(ndev, &pdev->dev); | 
|  |  | 
|  | memset(&edev->stats, 0, sizeof(edev->stats)); | 
|  | memcpy(&edev->dev_info, info, sizeof(*info)); | 
|  |  | 
|  | INIT_LIST_HEAD(&edev->vlan_list); | 
|  |  | 
|  | return edev; | 
|  | } | 
|  |  | 
|  | static void qede_init_ndev(struct qede_dev *edev) | 
|  | { | 
|  | struct net_device *ndev = edev->ndev; | 
|  | struct pci_dev *pdev = edev->pdev; | 
|  | u32 hw_features; | 
|  |  | 
|  | pci_set_drvdata(pdev, ndev); | 
|  |  | 
|  | ndev->mem_start = edev->dev_info.common.pci_mem_start; | 
|  | ndev->base_addr = ndev->mem_start; | 
|  | ndev->mem_end = edev->dev_info.common.pci_mem_end; | 
|  | ndev->irq = edev->dev_info.common.pci_irq; | 
|  |  | 
|  | ndev->watchdog_timeo = TX_TIMEOUT; | 
|  |  | 
|  | ndev->netdev_ops = &qede_netdev_ops; | 
|  |  | 
|  | qede_set_ethtool_ops(ndev); | 
|  |  | 
|  | ndev->priv_flags |= IFF_UNICAST_FLT; | 
|  |  | 
|  | /* user-changeble features */ | 
|  | hw_features = NETIF_F_GRO | NETIF_F_SG | | 
|  | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | 
|  | NETIF_F_TSO | NETIF_F_TSO6; | 
|  |  | 
|  | /* Encap features*/ | 
|  | hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL | | 
|  | NETIF_F_TSO_ECN | NETIF_F_GSO_UDP_TUNNEL_CSUM | | 
|  | NETIF_F_GSO_GRE_CSUM; | 
|  | ndev->hw_enc_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | 
|  | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO_ECN | | 
|  | NETIF_F_TSO6 | NETIF_F_GSO_GRE | | 
|  | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_RXCSUM | | 
|  | NETIF_F_GSO_UDP_TUNNEL_CSUM | | 
|  | NETIF_F_GSO_GRE_CSUM; | 
|  |  | 
|  | ndev->vlan_features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM | | 
|  | NETIF_F_HIGHDMA; | 
|  | ndev->features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM | | 
|  | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HIGHDMA | | 
|  | NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_CTAG_TX; | 
|  |  | 
|  | ndev->hw_features = hw_features; | 
|  |  | 
|  | /* MTU range: 46 - 9600 */ | 
|  | ndev->min_mtu = ETH_ZLEN - ETH_HLEN; | 
|  | ndev->max_mtu = QEDE_MAX_JUMBO_PACKET_SIZE; | 
|  |  | 
|  | /* Set network device HW mac */ | 
|  | ether_addr_copy(edev->ndev->dev_addr, edev->dev_info.common.hw_mac); | 
|  |  | 
|  | ndev->mtu = edev->dev_info.common.mtu; | 
|  | } | 
|  |  | 
|  | /* This function converts from 32b param to two params of level and module | 
|  | * Input 32b decoding: | 
|  | * b31 - enable all NOTICE prints. NOTICE prints are for deviation from the | 
|  | * 'happy' flow, e.g. memory allocation failed. | 
|  | * b30 - enable all INFO prints. INFO prints are for major steps in the flow | 
|  | * and provide important parameters. | 
|  | * b29-b0 - per-module bitmap, where each bit enables VERBOSE prints of that | 
|  | * module. VERBOSE prints are for tracking the specific flow in low level. | 
|  | * | 
|  | * Notice that the level should be that of the lowest required logs. | 
|  | */ | 
|  | void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level) | 
|  | { | 
|  | *p_dp_level = QED_LEVEL_NOTICE; | 
|  | *p_dp_module = 0; | 
|  |  | 
|  | if (debug & QED_LOG_VERBOSE_MASK) { | 
|  | *p_dp_level = QED_LEVEL_VERBOSE; | 
|  | *p_dp_module = (debug & 0x3FFFFFFF); | 
|  | } else if (debug & QED_LOG_INFO_MASK) { | 
|  | *p_dp_level = QED_LEVEL_INFO; | 
|  | } else if (debug & QED_LOG_NOTICE_MASK) { | 
|  | *p_dp_level = QED_LEVEL_NOTICE; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qede_free_fp_array(struct qede_dev *edev) | 
|  | { | 
|  | if (edev->fp_array) { | 
|  | struct qede_fastpath *fp; | 
|  | int i; | 
|  |  | 
|  | for_each_queue(i) { | 
|  | fp = &edev->fp_array[i]; | 
|  |  | 
|  | kfree(fp->sb_info); | 
|  | kfree(fp->rxq); | 
|  | kfree(fp->xdp_tx); | 
|  | kfree(fp->txq); | 
|  | } | 
|  | kfree(edev->fp_array); | 
|  | } | 
|  |  | 
|  | edev->num_queues = 0; | 
|  | edev->fp_num_tx = 0; | 
|  | edev->fp_num_rx = 0; | 
|  | } | 
|  |  | 
|  | static int qede_alloc_fp_array(struct qede_dev *edev) | 
|  | { | 
|  | u8 fp_combined, fp_rx = edev->fp_num_rx; | 
|  | struct qede_fastpath *fp; | 
|  | int i; | 
|  |  | 
|  | edev->fp_array = kcalloc(QEDE_QUEUE_CNT(edev), | 
|  | sizeof(*edev->fp_array), GFP_KERNEL); | 
|  | if (!edev->fp_array) { | 
|  | DP_NOTICE(edev, "fp array allocation failed\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | fp_combined = QEDE_QUEUE_CNT(edev) - fp_rx - edev->fp_num_tx; | 
|  |  | 
|  | /* Allocate the FP elements for Rx queues followed by combined and then | 
|  | * the Tx. This ordering should be maintained so that the respective | 
|  | * queues (Rx or Tx) will be together in the fastpath array and the | 
|  | * associated ids will be sequential. | 
|  | */ | 
|  | for_each_queue(i) { | 
|  | fp = &edev->fp_array[i]; | 
|  |  | 
|  | fp->sb_info = kzalloc(sizeof(*fp->sb_info), GFP_KERNEL); | 
|  | if (!fp->sb_info) { | 
|  | DP_NOTICE(edev, "sb info struct allocation failed\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (fp_rx) { | 
|  | fp->type = QEDE_FASTPATH_RX; | 
|  | fp_rx--; | 
|  | } else if (fp_combined) { | 
|  | fp->type = QEDE_FASTPATH_COMBINED; | 
|  | fp_combined--; | 
|  | } else { | 
|  | fp->type = QEDE_FASTPATH_TX; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_TX) { | 
|  | fp->txq = kzalloc(sizeof(*fp->txq), GFP_KERNEL); | 
|  | if (!fp->txq) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_RX) { | 
|  | fp->rxq = kzalloc(sizeof(*fp->rxq), GFP_KERNEL); | 
|  | if (!fp->rxq) | 
|  | goto err; | 
|  |  | 
|  | if (edev->xdp_prog) { | 
|  | fp->xdp_tx = kzalloc(sizeof(*fp->xdp_tx), | 
|  | GFP_KERNEL); | 
|  | if (!fp->xdp_tx) | 
|  | goto err; | 
|  | fp->type |= QEDE_FASTPATH_XDP; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | err: | 
|  | qede_free_fp_array(edev); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static void qede_sp_task(struct work_struct *work) | 
|  | { | 
|  | struct qede_dev *edev = container_of(work, struct qede_dev, | 
|  | sp_task.work); | 
|  | struct qed_dev *cdev = edev->cdev; | 
|  |  | 
|  | __qede_lock(edev); | 
|  |  | 
|  | if (test_and_clear_bit(QEDE_SP_RX_MODE, &edev->sp_flags)) | 
|  | if (edev->state == QEDE_STATE_OPEN) | 
|  | qede_config_rx_mode(edev->ndev); | 
|  |  | 
|  | if (test_and_clear_bit(QEDE_SP_VXLAN_PORT_CONFIG, &edev->sp_flags)) { | 
|  | struct qed_tunn_params tunn_params; | 
|  |  | 
|  | memset(&tunn_params, 0, sizeof(tunn_params)); | 
|  | tunn_params.update_vxlan_port = 1; | 
|  | tunn_params.vxlan_port = edev->vxlan_dst_port; | 
|  | qed_ops->tunn_config(cdev, &tunn_params); | 
|  | } | 
|  |  | 
|  | if (test_and_clear_bit(QEDE_SP_GENEVE_PORT_CONFIG, &edev->sp_flags)) { | 
|  | struct qed_tunn_params tunn_params; | 
|  |  | 
|  | memset(&tunn_params, 0, sizeof(tunn_params)); | 
|  | tunn_params.update_geneve_port = 1; | 
|  | tunn_params.geneve_port = edev->geneve_dst_port; | 
|  | qed_ops->tunn_config(cdev, &tunn_params); | 
|  | } | 
|  |  | 
|  | __qede_unlock(edev); | 
|  | } | 
|  |  | 
|  | static void qede_update_pf_params(struct qed_dev *cdev) | 
|  | { | 
|  | struct qed_pf_params pf_params; | 
|  |  | 
|  | /* 64 rx + 64 tx + 64 XDP */ | 
|  | memset(&pf_params, 0, sizeof(struct qed_pf_params)); | 
|  | pf_params.eth_pf_params.num_cons = 192; | 
|  | qed_ops->common->update_pf_params(cdev, &pf_params); | 
|  | } | 
|  |  | 
|  | enum qede_probe_mode { | 
|  | QEDE_PROBE_NORMAL, | 
|  | }; | 
|  |  | 
|  | static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, | 
|  | bool is_vf, enum qede_probe_mode mode) | 
|  | { | 
|  | struct qed_probe_params probe_params; | 
|  | struct qed_slowpath_params sp_params; | 
|  | struct qed_dev_eth_info dev_info; | 
|  | struct qede_dev *edev; | 
|  | struct qed_dev *cdev; | 
|  | int rc; | 
|  |  | 
|  | if (unlikely(dp_level & QED_LEVEL_INFO)) | 
|  | pr_notice("Starting qede probe\n"); | 
|  |  | 
|  | memset(&probe_params, 0, sizeof(probe_params)); | 
|  | probe_params.protocol = QED_PROTOCOL_ETH; | 
|  | probe_params.dp_module = dp_module; | 
|  | probe_params.dp_level = dp_level; | 
|  | probe_params.is_vf = is_vf; | 
|  | cdev = qed_ops->common->probe(pdev, &probe_params); | 
|  | if (!cdev) { | 
|  | rc = -ENODEV; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | qede_update_pf_params(cdev); | 
|  |  | 
|  | /* Start the Slowpath-process */ | 
|  | memset(&sp_params, 0, sizeof(sp_params)); | 
|  | sp_params.int_mode = QED_INT_MODE_MSIX; | 
|  | sp_params.drv_major = QEDE_MAJOR_VERSION; | 
|  | sp_params.drv_minor = QEDE_MINOR_VERSION; | 
|  | sp_params.drv_rev = QEDE_REVISION_VERSION; | 
|  | sp_params.drv_eng = QEDE_ENGINEERING_VERSION; | 
|  | strlcpy(sp_params.name, "qede LAN", QED_DRV_VER_STR_SIZE); | 
|  | rc = qed_ops->common->slowpath_start(cdev, &sp_params); | 
|  | if (rc) { | 
|  | pr_notice("Cannot start slowpath\n"); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | /* Learn information crucial for qede to progress */ | 
|  | rc = qed_ops->fill_dev_info(cdev, &dev_info); | 
|  | if (rc) | 
|  | goto err2; | 
|  |  | 
|  | edev = qede_alloc_etherdev(cdev, pdev, &dev_info, dp_module, | 
|  | dp_level); | 
|  | if (!edev) { | 
|  | rc = -ENOMEM; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | if (is_vf) | 
|  | edev->flags |= QEDE_FLAG_IS_VF; | 
|  |  | 
|  | qede_init_ndev(edev); | 
|  |  | 
|  | rc = qede_roce_dev_add(edev); | 
|  | if (rc) | 
|  | goto err3; | 
|  |  | 
|  | rc = register_netdev(edev->ndev); | 
|  | if (rc) { | 
|  | DP_NOTICE(edev, "Cannot register net-device\n"); | 
|  | goto err4; | 
|  | } | 
|  |  | 
|  | edev->ops->common->set_id(cdev, edev->ndev->name, DRV_MODULE_VERSION); | 
|  |  | 
|  | edev->ops->register_ops(cdev, &qede_ll_ops, edev); | 
|  |  | 
|  | #ifdef CONFIG_DCB | 
|  | if (!IS_VF(edev)) | 
|  | qede_set_dcbnl_ops(edev->ndev); | 
|  | #endif | 
|  |  | 
|  | INIT_DELAYED_WORK(&edev->sp_task, qede_sp_task); | 
|  | mutex_init(&edev->qede_lock); | 
|  | edev->rx_copybreak = QEDE_RX_HDR_SIZE; | 
|  |  | 
|  | DP_INFO(edev, "Ending successfully qede probe\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err4: | 
|  | qede_roce_dev_remove(edev); | 
|  | err3: | 
|  | free_netdev(edev->ndev); | 
|  | err2: | 
|  | qed_ops->common->slowpath_stop(cdev); | 
|  | err1: | 
|  | qed_ops->common->remove(cdev); | 
|  | err0: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id) | 
|  | { | 
|  | bool is_vf = false; | 
|  | u32 dp_module = 0; | 
|  | u8 dp_level = 0; | 
|  |  | 
|  | switch ((enum qede_pci_private)id->driver_data) { | 
|  | case QEDE_PRIVATE_VF: | 
|  | if (debug & QED_LOG_VERBOSE_MASK) | 
|  | dev_err(&pdev->dev, "Probing a VF\n"); | 
|  | is_vf = true; | 
|  | break; | 
|  | default: | 
|  | if (debug & QED_LOG_VERBOSE_MASK) | 
|  | dev_err(&pdev->dev, "Probing a PF\n"); | 
|  | } | 
|  |  | 
|  | qede_config_debug(debug, &dp_module, &dp_level); | 
|  |  | 
|  | return __qede_probe(pdev, dp_module, dp_level, is_vf, | 
|  | QEDE_PROBE_NORMAL); | 
|  | } | 
|  |  | 
|  | enum qede_remove_mode { | 
|  | QEDE_REMOVE_NORMAL, | 
|  | }; | 
|  |  | 
|  | static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode) | 
|  | { | 
|  | struct net_device *ndev = pci_get_drvdata(pdev); | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  | struct qed_dev *cdev = edev->cdev; | 
|  |  | 
|  | DP_INFO(edev, "Starting qede_remove\n"); | 
|  |  | 
|  | cancel_delayed_work_sync(&edev->sp_task); | 
|  |  | 
|  | unregister_netdev(ndev); | 
|  |  | 
|  | qede_roce_dev_remove(edev); | 
|  |  | 
|  | edev->ops->common->set_power_state(cdev, PCI_D0); | 
|  |  | 
|  | pci_set_drvdata(pdev, NULL); | 
|  |  | 
|  | /* Release edev's reference to XDP's bpf if such exist */ | 
|  | if (edev->xdp_prog) | 
|  | bpf_prog_put(edev->xdp_prog); | 
|  |  | 
|  | free_netdev(ndev); | 
|  |  | 
|  | /* Use global ops since we've freed edev */ | 
|  | qed_ops->common->slowpath_stop(cdev); | 
|  | if (system_state == SYSTEM_POWER_OFF) | 
|  | return; | 
|  | qed_ops->common->remove(cdev); | 
|  |  | 
|  | dev_info(&pdev->dev, "Ending qede_remove successfully\n"); | 
|  | } | 
|  |  | 
|  | static void qede_remove(struct pci_dev *pdev) | 
|  | { | 
|  | __qede_remove(pdev, QEDE_REMOVE_NORMAL); | 
|  | } | 
|  |  | 
|  | static void qede_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | __qede_remove(pdev, QEDE_REMOVE_NORMAL); | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------- | 
|  | * START OF LOAD / UNLOAD | 
|  | * ------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static int qede_set_num_queues(struct qede_dev *edev) | 
|  | { | 
|  | int rc; | 
|  | u16 rss_num; | 
|  |  | 
|  | /* Setup queues according to possible resources*/ | 
|  | if (edev->req_queues) | 
|  | rss_num = edev->req_queues; | 
|  | else | 
|  | rss_num = netif_get_num_default_rss_queues() * | 
|  | edev->dev_info.common.num_hwfns; | 
|  |  | 
|  | rss_num = min_t(u16, QEDE_MAX_RSS_CNT(edev), rss_num); | 
|  |  | 
|  | rc = edev->ops->common->set_fp_int(edev->cdev, rss_num); | 
|  | if (rc > 0) { | 
|  | /* Managed to request interrupts for our queues */ | 
|  | edev->num_queues = rc; | 
|  | DP_INFO(edev, "Managed %d [of %d] RSS queues\n", | 
|  | QEDE_QUEUE_CNT(edev), rss_num); | 
|  | rc = 0; | 
|  | } | 
|  |  | 
|  | edev->fp_num_tx = edev->req_num_tx; | 
|  | edev->fp_num_rx = edev->req_num_rx; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_free_mem_sb(struct qede_dev *edev, | 
|  | struct qed_sb_info *sb_info) | 
|  | { | 
|  | if (sb_info->sb_virt) | 
|  | dma_free_coherent(&edev->pdev->dev, sizeof(*sb_info->sb_virt), | 
|  | (void *)sb_info->sb_virt, sb_info->sb_phys); | 
|  | } | 
|  |  | 
|  | /* This function allocates fast-path status block memory */ | 
|  | static int qede_alloc_mem_sb(struct qede_dev *edev, | 
|  | struct qed_sb_info *sb_info, u16 sb_id) | 
|  | { | 
|  | struct status_block *sb_virt; | 
|  | dma_addr_t sb_phys; | 
|  | int rc; | 
|  |  | 
|  | sb_virt = dma_alloc_coherent(&edev->pdev->dev, | 
|  | sizeof(*sb_virt), &sb_phys, GFP_KERNEL); | 
|  | if (!sb_virt) { | 
|  | DP_ERR(edev, "Status block allocation failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | rc = edev->ops->common->sb_init(edev->cdev, sb_info, | 
|  | sb_virt, sb_phys, sb_id, | 
|  | QED_SB_TYPE_L2_QUEUE); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Status block initialization failed\n"); | 
|  | dma_free_coherent(&edev->pdev->dev, sizeof(*sb_virt), | 
|  | sb_virt, sb_phys); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qede_free_rx_buffers(struct qede_dev *edev, | 
|  | struct qede_rx_queue *rxq) | 
|  | { | 
|  | u16 i; | 
|  |  | 
|  | for (i = rxq->sw_rx_cons; i != rxq->sw_rx_prod; i++) { | 
|  | struct sw_rx_data *rx_buf; | 
|  | struct page *data; | 
|  |  | 
|  | rx_buf = &rxq->sw_rx_ring[i & NUM_RX_BDS_MAX]; | 
|  | data = rx_buf->data; | 
|  |  | 
|  | dma_unmap_page(&edev->pdev->dev, | 
|  | rx_buf->mapping, PAGE_SIZE, rxq->data_direction); | 
|  |  | 
|  | rx_buf->data = NULL; | 
|  | __free_page(data); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qede_free_sge_mem(struct qede_dev *edev, struct qede_rx_queue *rxq) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (edev->gro_disable) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < ETH_TPA_MAX_AGGS_NUM; i++) { | 
|  | struct qede_agg_info *tpa_info = &rxq->tpa_info[i]; | 
|  | struct sw_rx_data *replace_buf = &tpa_info->buffer; | 
|  |  | 
|  | if (replace_buf->data) { | 
|  | dma_unmap_page(&edev->pdev->dev, | 
|  | replace_buf->mapping, | 
|  | PAGE_SIZE, DMA_FROM_DEVICE); | 
|  | __free_page(replace_buf->data); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qede_free_mem_rxq(struct qede_dev *edev, struct qede_rx_queue *rxq) | 
|  | { | 
|  | qede_free_sge_mem(edev, rxq); | 
|  |  | 
|  | /* Free rx buffers */ | 
|  | qede_free_rx_buffers(edev, rxq); | 
|  |  | 
|  | /* Free the parallel SW ring */ | 
|  | kfree(rxq->sw_rx_ring); | 
|  |  | 
|  | /* Free the real RQ ring used by FW */ | 
|  | edev->ops->common->chain_free(edev->cdev, &rxq->rx_bd_ring); | 
|  | edev->ops->common->chain_free(edev->cdev, &rxq->rx_comp_ring); | 
|  | } | 
|  |  | 
|  | static int qede_alloc_sge_mem(struct qede_dev *edev, struct qede_rx_queue *rxq) | 
|  | { | 
|  | dma_addr_t mapping; | 
|  | int i; | 
|  |  | 
|  | /* Don't perform FW aggregations in case of XDP */ | 
|  | if (edev->xdp_prog) | 
|  | edev->gro_disable = 1; | 
|  |  | 
|  | if (edev->gro_disable) | 
|  | return 0; | 
|  |  | 
|  | if (edev->ndev->mtu > PAGE_SIZE) { | 
|  | edev->gro_disable = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ETH_TPA_MAX_AGGS_NUM; i++) { | 
|  | struct qede_agg_info *tpa_info = &rxq->tpa_info[i]; | 
|  | struct sw_rx_data *replace_buf = &tpa_info->buffer; | 
|  |  | 
|  | replace_buf->data = alloc_pages(GFP_ATOMIC, 0); | 
|  | if (unlikely(!replace_buf->data)) { | 
|  | DP_NOTICE(edev, | 
|  | "Failed to allocate TPA skb pool [replacement buffer]\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | mapping = dma_map_page(&edev->pdev->dev, replace_buf->data, 0, | 
|  | PAGE_SIZE, DMA_FROM_DEVICE); | 
|  | if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { | 
|  | DP_NOTICE(edev, | 
|  | "Failed to map TPA replacement buffer\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | replace_buf->mapping = mapping; | 
|  | tpa_info->buffer.page_offset = 0; | 
|  | tpa_info->buffer_mapping = mapping; | 
|  | tpa_info->state = QEDE_AGG_STATE_NONE; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | err: | 
|  | qede_free_sge_mem(edev, rxq); | 
|  | edev->gro_disable = 1; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* This function allocates all memory needed per Rx queue */ | 
|  | static int qede_alloc_mem_rxq(struct qede_dev *edev, struct qede_rx_queue *rxq) | 
|  | { | 
|  | int i, rc, size; | 
|  |  | 
|  | rxq->num_rx_buffers = edev->q_num_rx_buffers; | 
|  |  | 
|  | rxq->rx_buf_size = NET_IP_ALIGN + ETH_OVERHEAD + edev->ndev->mtu; | 
|  |  | 
|  | if (rxq->rx_buf_size > PAGE_SIZE) | 
|  | rxq->rx_buf_size = PAGE_SIZE; | 
|  |  | 
|  | /* Segment size to spilt a page in multiple equal parts, | 
|  | * unless XDP is used in which case we'd use the entire page. | 
|  | */ | 
|  | if (!edev->xdp_prog) | 
|  | rxq->rx_buf_seg_size = roundup_pow_of_two(rxq->rx_buf_size); | 
|  | else | 
|  | rxq->rx_buf_seg_size = PAGE_SIZE; | 
|  |  | 
|  | /* Allocate the parallel driver ring for Rx buffers */ | 
|  | size = sizeof(*rxq->sw_rx_ring) * RX_RING_SIZE; | 
|  | rxq->sw_rx_ring = kzalloc(size, GFP_KERNEL); | 
|  | if (!rxq->sw_rx_ring) { | 
|  | DP_ERR(edev, "Rx buffers ring allocation failed\n"); | 
|  | rc = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* Allocate FW Rx ring  */ | 
|  | rc = edev->ops->common->chain_alloc(edev->cdev, | 
|  | QED_CHAIN_USE_TO_CONSUME_PRODUCE, | 
|  | QED_CHAIN_MODE_NEXT_PTR, | 
|  | QED_CHAIN_CNT_TYPE_U16, | 
|  | RX_RING_SIZE, | 
|  | sizeof(struct eth_rx_bd), | 
|  | &rxq->rx_bd_ring); | 
|  |  | 
|  | if (rc) | 
|  | goto err; | 
|  |  | 
|  | /* Allocate FW completion ring */ | 
|  | rc = edev->ops->common->chain_alloc(edev->cdev, | 
|  | QED_CHAIN_USE_TO_CONSUME, | 
|  | QED_CHAIN_MODE_PBL, | 
|  | QED_CHAIN_CNT_TYPE_U16, | 
|  | RX_RING_SIZE, | 
|  | sizeof(union eth_rx_cqe), | 
|  | &rxq->rx_comp_ring); | 
|  | if (rc) | 
|  | goto err; | 
|  |  | 
|  | /* Allocate buffers for the Rx ring */ | 
|  | for (i = 0; i < rxq->num_rx_buffers; i++) { | 
|  | rc = qede_alloc_rx_buffer(rxq); | 
|  | if (rc) { | 
|  | DP_ERR(edev, | 
|  | "Rx buffers allocation failed at index %d\n", i); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | rc = qede_alloc_sge_mem(edev, rxq); | 
|  | err: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_free_mem_txq(struct qede_dev *edev, struct qede_tx_queue *txq) | 
|  | { | 
|  | /* Free the parallel SW ring */ | 
|  | if (txq->is_xdp) | 
|  | kfree(txq->sw_tx_ring.pages); | 
|  | else | 
|  | kfree(txq->sw_tx_ring.skbs); | 
|  |  | 
|  | /* Free the real RQ ring used by FW */ | 
|  | edev->ops->common->chain_free(edev->cdev, &txq->tx_pbl); | 
|  | } | 
|  |  | 
|  | /* This function allocates all memory needed per Tx queue */ | 
|  | static int qede_alloc_mem_txq(struct qede_dev *edev, struct qede_tx_queue *txq) | 
|  | { | 
|  | union eth_tx_bd_types *p_virt; | 
|  | int size, rc; | 
|  |  | 
|  | txq->num_tx_buffers = edev->q_num_tx_buffers; | 
|  |  | 
|  | /* Allocate the parallel driver ring for Tx buffers */ | 
|  | if (txq->is_xdp) { | 
|  | size = sizeof(*txq->sw_tx_ring.pages) * TX_RING_SIZE; | 
|  | txq->sw_tx_ring.pages = kzalloc(size, GFP_KERNEL); | 
|  | if (!txq->sw_tx_ring.pages) | 
|  | goto err; | 
|  | } else { | 
|  | size = sizeof(*txq->sw_tx_ring.skbs) * TX_RING_SIZE; | 
|  | txq->sw_tx_ring.skbs = kzalloc(size, GFP_KERNEL); | 
|  | if (!txq->sw_tx_ring.skbs) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | rc = edev->ops->common->chain_alloc(edev->cdev, | 
|  | QED_CHAIN_USE_TO_CONSUME_PRODUCE, | 
|  | QED_CHAIN_MODE_PBL, | 
|  | QED_CHAIN_CNT_TYPE_U16, | 
|  | TX_RING_SIZE, | 
|  | sizeof(*p_virt), &txq->tx_pbl); | 
|  | if (rc) | 
|  | goto err; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | qede_free_mem_txq(edev, txq); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* This function frees all memory of a single fp */ | 
|  | static void qede_free_mem_fp(struct qede_dev *edev, struct qede_fastpath *fp) | 
|  | { | 
|  | qede_free_mem_sb(edev, fp->sb_info); | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_RX) | 
|  | qede_free_mem_rxq(edev, fp->rxq); | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_TX) | 
|  | qede_free_mem_txq(edev, fp->txq); | 
|  | } | 
|  |  | 
|  | /* This function allocates all memory needed for a single fp (i.e. an entity | 
|  | * which contains status block, one rx queue and/or multiple per-TC tx queues. | 
|  | */ | 
|  | static int qede_alloc_mem_fp(struct qede_dev *edev, struct qede_fastpath *fp) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | rc = qede_alloc_mem_sb(edev, fp->sb_info, fp->id); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_RX) { | 
|  | rc = qede_alloc_mem_rxq(edev, fp->rxq); | 
|  | if (rc) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_XDP) { | 
|  | rc = qede_alloc_mem_txq(edev, fp->xdp_tx); | 
|  | if (rc) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_TX) { | 
|  | rc = qede_alloc_mem_txq(edev, fp->txq); | 
|  | if (rc) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_free_mem_load(struct qede_dev *edev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for_each_queue(i) { | 
|  | struct qede_fastpath *fp = &edev->fp_array[i]; | 
|  |  | 
|  | qede_free_mem_fp(edev, fp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* This function allocates all qede memory at NIC load. */ | 
|  | static int qede_alloc_mem_load(struct qede_dev *edev) | 
|  | { | 
|  | int rc = 0, queue_id; | 
|  |  | 
|  | for (queue_id = 0; queue_id < QEDE_QUEUE_CNT(edev); queue_id++) { | 
|  | struct qede_fastpath *fp = &edev->fp_array[queue_id]; | 
|  |  | 
|  | rc = qede_alloc_mem_fp(edev, fp); | 
|  | if (rc) { | 
|  | DP_ERR(edev, | 
|  | "Failed to allocate memory for fastpath - rss id = %d\n", | 
|  | queue_id); | 
|  | qede_free_mem_load(edev); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This function inits fp content and resets the SB, RXQ and TXQ structures */ | 
|  | static void qede_init_fp(struct qede_dev *edev) | 
|  | { | 
|  | int queue_id, rxq_index = 0, txq_index = 0; | 
|  | struct qede_fastpath *fp; | 
|  |  | 
|  | for_each_queue(queue_id) { | 
|  | fp = &edev->fp_array[queue_id]; | 
|  |  | 
|  | fp->edev = edev; | 
|  | fp->id = queue_id; | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_XDP) { | 
|  | fp->xdp_tx->index = QEDE_TXQ_IDX_TO_XDP(edev, | 
|  | rxq_index); | 
|  | fp->xdp_tx->is_xdp = 1; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_RX) { | 
|  | fp->rxq->rxq_id = rxq_index++; | 
|  |  | 
|  | /* Determine how to map buffers for this queue */ | 
|  | if (fp->type & QEDE_FASTPATH_XDP) | 
|  | fp->rxq->data_direction = DMA_BIDIRECTIONAL; | 
|  | else | 
|  | fp->rxq->data_direction = DMA_FROM_DEVICE; | 
|  | fp->rxq->dev = &edev->pdev->dev; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_TX) { | 
|  | fp->txq->index = txq_index++; | 
|  | if (edev->dev_info.is_legacy) | 
|  | fp->txq->is_legacy = 1; | 
|  | fp->txq->dev = &edev->pdev->dev; | 
|  | } | 
|  |  | 
|  | snprintf(fp->name, sizeof(fp->name), "%s-fp-%d", | 
|  | edev->ndev->name, queue_id); | 
|  | } | 
|  |  | 
|  | edev->gro_disable = !(edev->ndev->features & NETIF_F_GRO); | 
|  | } | 
|  |  | 
|  | static int qede_set_real_num_queues(struct qede_dev *edev) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | rc = netif_set_real_num_tx_queues(edev->ndev, QEDE_TSS_COUNT(edev)); | 
|  | if (rc) { | 
|  | DP_NOTICE(edev, "Failed to set real number of Tx queues\n"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | rc = netif_set_real_num_rx_queues(edev->ndev, QEDE_RSS_COUNT(edev)); | 
|  | if (rc) { | 
|  | DP_NOTICE(edev, "Failed to set real number of Rx queues\n"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qede_napi_disable_remove(struct qede_dev *edev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for_each_queue(i) { | 
|  | napi_disable(&edev->fp_array[i].napi); | 
|  |  | 
|  | netif_napi_del(&edev->fp_array[i].napi); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qede_napi_add_enable(struct qede_dev *edev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* Add NAPI objects */ | 
|  | for_each_queue(i) { | 
|  | netif_napi_add(edev->ndev, &edev->fp_array[i].napi, | 
|  | qede_poll, NAPI_POLL_WEIGHT); | 
|  | napi_enable(&edev->fp_array[i].napi); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qede_sync_free_irqs(struct qede_dev *edev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < edev->int_info.used_cnt; i++) { | 
|  | if (edev->int_info.msix_cnt) { | 
|  | synchronize_irq(edev->int_info.msix[i].vector); | 
|  | free_irq(edev->int_info.msix[i].vector, | 
|  | &edev->fp_array[i]); | 
|  | } else { | 
|  | edev->ops->common->simd_handler_clean(edev->cdev, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | edev->int_info.used_cnt = 0; | 
|  | } | 
|  |  | 
|  | static int qede_req_msix_irqs(struct qede_dev *edev) | 
|  | { | 
|  | int i, rc; | 
|  |  | 
|  | /* Sanitize number of interrupts == number of prepared RSS queues */ | 
|  | if (QEDE_QUEUE_CNT(edev) > edev->int_info.msix_cnt) { | 
|  | DP_ERR(edev, | 
|  | "Interrupt mismatch: %d RSS queues > %d MSI-x vectors\n", | 
|  | QEDE_QUEUE_CNT(edev), edev->int_info.msix_cnt); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < QEDE_QUEUE_CNT(edev); i++) { | 
|  | rc = request_irq(edev->int_info.msix[i].vector, | 
|  | qede_msix_fp_int, 0, edev->fp_array[i].name, | 
|  | &edev->fp_array[i]); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Request fp %d irq failed\n", i); | 
|  | qede_sync_free_irqs(edev); | 
|  | return rc; | 
|  | } | 
|  | DP_VERBOSE(edev, NETIF_MSG_INTR, | 
|  | "Requested fp irq for %s [entry %d]. Cookie is at %p\n", | 
|  | edev->fp_array[i].name, i, | 
|  | &edev->fp_array[i]); | 
|  | edev->int_info.used_cnt++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qede_simd_fp_handler(void *cookie) | 
|  | { | 
|  | struct qede_fastpath *fp = (struct qede_fastpath *)cookie; | 
|  |  | 
|  | napi_schedule_irqoff(&fp->napi); | 
|  | } | 
|  |  | 
|  | static int qede_setup_irqs(struct qede_dev *edev) | 
|  | { | 
|  | int i, rc = 0; | 
|  |  | 
|  | /* Learn Interrupt configuration */ | 
|  | rc = edev->ops->common->get_fp_int(edev->cdev, &edev->int_info); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | if (edev->int_info.msix_cnt) { | 
|  | rc = qede_req_msix_irqs(edev); | 
|  | if (rc) | 
|  | return rc; | 
|  | edev->ndev->irq = edev->int_info.msix[0].vector; | 
|  | } else { | 
|  | const struct qed_common_ops *ops; | 
|  |  | 
|  | /* qed should learn receive the RSS ids and callbacks */ | 
|  | ops = edev->ops->common; | 
|  | for (i = 0; i < QEDE_QUEUE_CNT(edev); i++) | 
|  | ops->simd_handler_config(edev->cdev, | 
|  | &edev->fp_array[i], i, | 
|  | qede_simd_fp_handler); | 
|  | edev->int_info.used_cnt = QEDE_QUEUE_CNT(edev); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qede_drain_txq(struct qede_dev *edev, | 
|  | struct qede_tx_queue *txq, bool allow_drain) | 
|  | { | 
|  | int rc, cnt = 1000; | 
|  |  | 
|  | while (txq->sw_tx_cons != txq->sw_tx_prod) { | 
|  | if (!cnt) { | 
|  | if (allow_drain) { | 
|  | DP_NOTICE(edev, | 
|  | "Tx queue[%d] is stuck, requesting MCP to drain\n", | 
|  | txq->index); | 
|  | rc = edev->ops->common->drain(edev->cdev); | 
|  | if (rc) | 
|  | return rc; | 
|  | return qede_drain_txq(edev, txq, false); | 
|  | } | 
|  | DP_NOTICE(edev, | 
|  | "Timeout waiting for tx queue[%d]: PROD=%d, CONS=%d\n", | 
|  | txq->index, txq->sw_tx_prod, | 
|  | txq->sw_tx_cons); | 
|  | return -ENODEV; | 
|  | } | 
|  | cnt--; | 
|  | usleep_range(1000, 2000); | 
|  | barrier(); | 
|  | } | 
|  |  | 
|  | /* FW finished processing, wait for HW to transmit all tx packets */ | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qede_stop_txq(struct qede_dev *edev, | 
|  | struct qede_tx_queue *txq, int rss_id) | 
|  | { | 
|  | return edev->ops->q_tx_stop(edev->cdev, rss_id, txq->handle); | 
|  | } | 
|  |  | 
|  | static int qede_stop_queues(struct qede_dev *edev) | 
|  | { | 
|  | struct qed_update_vport_params vport_update_params; | 
|  | struct qed_dev *cdev = edev->cdev; | 
|  | struct qede_fastpath *fp; | 
|  | int rc, i; | 
|  |  | 
|  | /* Disable the vport */ | 
|  | memset(&vport_update_params, 0, sizeof(vport_update_params)); | 
|  | vport_update_params.vport_id = 0; | 
|  | vport_update_params.update_vport_active_flg = 1; | 
|  | vport_update_params.vport_active_flg = 0; | 
|  | vport_update_params.update_rss_flg = 0; | 
|  |  | 
|  | rc = edev->ops->vport_update(cdev, &vport_update_params); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Failed to update vport\n"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Flush Tx queues. If needed, request drain from MCP */ | 
|  | for_each_queue(i) { | 
|  | fp = &edev->fp_array[i]; | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_TX) { | 
|  | rc = qede_drain_txq(edev, fp->txq, true); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_XDP) { | 
|  | rc = qede_drain_txq(edev, fp->xdp_tx, true); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Stop all Queues in reverse order */ | 
|  | for (i = QEDE_QUEUE_CNT(edev) - 1; i >= 0; i--) { | 
|  | fp = &edev->fp_array[i]; | 
|  |  | 
|  | /* Stop the Tx Queue(s) */ | 
|  | if (fp->type & QEDE_FASTPATH_TX) { | 
|  | rc = qede_stop_txq(edev, fp->txq, i); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Stop the Rx Queue */ | 
|  | if (fp->type & QEDE_FASTPATH_RX) { | 
|  | rc = edev->ops->q_rx_stop(cdev, i, fp->rxq->handle); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Failed to stop RXQ #%d\n", i); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Stop the XDP forwarding queue */ | 
|  | if (fp->type & QEDE_FASTPATH_XDP) { | 
|  | rc = qede_stop_txq(edev, fp->xdp_tx, i); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | bpf_prog_put(fp->rxq->xdp_prog); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Stop the vport */ | 
|  | rc = edev->ops->vport_stop(cdev, 0); | 
|  | if (rc) | 
|  | DP_ERR(edev, "Failed to stop VPORT\n"); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int qede_start_txq(struct qede_dev *edev, | 
|  | struct qede_fastpath *fp, | 
|  | struct qede_tx_queue *txq, u8 rss_id, u16 sb_idx) | 
|  | { | 
|  | dma_addr_t phys_table = qed_chain_get_pbl_phys(&txq->tx_pbl); | 
|  | u32 page_cnt = qed_chain_get_page_cnt(&txq->tx_pbl); | 
|  | struct qed_queue_start_common_params params; | 
|  | struct qed_txq_start_ret_params ret_params; | 
|  | int rc; | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  | memset(&ret_params, 0, sizeof(ret_params)); | 
|  |  | 
|  | /* Let the XDP queue share the queue-zone with one of the regular txq. | 
|  | * We don't really care about its coalescing. | 
|  | */ | 
|  | if (txq->is_xdp) | 
|  | params.queue_id = QEDE_TXQ_XDP_TO_IDX(edev, txq); | 
|  | else | 
|  | params.queue_id = txq->index; | 
|  |  | 
|  | params.sb = fp->sb_info->igu_sb_id; | 
|  | params.sb_idx = sb_idx; | 
|  |  | 
|  | rc = edev->ops->q_tx_start(edev->cdev, rss_id, ¶ms, phys_table, | 
|  | page_cnt, &ret_params); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Start TXQ #%d failed %d\n", txq->index, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | txq->doorbell_addr = ret_params.p_doorbell; | 
|  | txq->handle = ret_params.p_handle; | 
|  |  | 
|  | /* Determine the FW consumer address associated */ | 
|  | txq->hw_cons_ptr = &fp->sb_info->sb_virt->pi_array[sb_idx]; | 
|  |  | 
|  | /* Prepare the doorbell parameters */ | 
|  | SET_FIELD(txq->tx_db.data.params, ETH_DB_DATA_DEST, DB_DEST_XCM); | 
|  | SET_FIELD(txq->tx_db.data.params, ETH_DB_DATA_AGG_CMD, DB_AGG_CMD_SET); | 
|  | SET_FIELD(txq->tx_db.data.params, ETH_DB_DATA_AGG_VAL_SEL, | 
|  | DQ_XCM_ETH_TX_BD_PROD_CMD); | 
|  | txq->tx_db.data.agg_flags = DQ_XCM_ETH_DQ_CF_CMD; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int qede_start_queues(struct qede_dev *edev, bool clear_stats) | 
|  | { | 
|  | int vlan_removal_en = 1; | 
|  | struct qed_dev *cdev = edev->cdev; | 
|  | struct qed_update_vport_params vport_update_params; | 
|  | struct qed_queue_start_common_params q_params; | 
|  | struct qed_dev_info *qed_info = &edev->dev_info.common; | 
|  | struct qed_start_vport_params start = {0}; | 
|  | bool reset_rss_indir = false; | 
|  | int rc, i; | 
|  |  | 
|  | if (!edev->num_queues) { | 
|  | DP_ERR(edev, | 
|  | "Cannot update V-VPORT as active as there are no Rx queues\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | start.gro_enable = !edev->gro_disable; | 
|  | start.mtu = edev->ndev->mtu; | 
|  | start.vport_id = 0; | 
|  | start.drop_ttl0 = true; | 
|  | start.remove_inner_vlan = vlan_removal_en; | 
|  | start.clear_stats = clear_stats; | 
|  |  | 
|  | rc = edev->ops->vport_start(cdev, &start); | 
|  |  | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Start V-PORT failed %d\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | DP_VERBOSE(edev, NETIF_MSG_IFUP, | 
|  | "Start vport ramrod passed, vport_id = %d, MTU = %d, vlan_removal_en = %d\n", | 
|  | start.vport_id, edev->ndev->mtu + 0xe, vlan_removal_en); | 
|  |  | 
|  | for_each_queue(i) { | 
|  | struct qede_fastpath *fp = &edev->fp_array[i]; | 
|  | dma_addr_t p_phys_table; | 
|  | u32 page_cnt; | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_RX) { | 
|  | struct qed_rxq_start_ret_params ret_params; | 
|  | struct qede_rx_queue *rxq = fp->rxq; | 
|  | __le16 *val; | 
|  |  | 
|  | memset(&ret_params, 0, sizeof(ret_params)); | 
|  | memset(&q_params, 0, sizeof(q_params)); | 
|  | q_params.queue_id = rxq->rxq_id; | 
|  | q_params.vport_id = 0; | 
|  | q_params.sb = fp->sb_info->igu_sb_id; | 
|  | q_params.sb_idx = RX_PI; | 
|  |  | 
|  | p_phys_table = | 
|  | qed_chain_get_pbl_phys(&rxq->rx_comp_ring); | 
|  | page_cnt = qed_chain_get_page_cnt(&rxq->rx_comp_ring); | 
|  |  | 
|  | rc = edev->ops->q_rx_start(cdev, i, &q_params, | 
|  | rxq->rx_buf_size, | 
|  | rxq->rx_bd_ring.p_phys_addr, | 
|  | p_phys_table, | 
|  | page_cnt, &ret_params); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Start RXQ #%d failed %d\n", i, | 
|  | rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Use the return parameters */ | 
|  | rxq->hw_rxq_prod_addr = ret_params.p_prod; | 
|  | rxq->handle = ret_params.p_handle; | 
|  |  | 
|  | val = &fp->sb_info->sb_virt->pi_array[RX_PI]; | 
|  | rxq->hw_cons_ptr = val; | 
|  |  | 
|  | qede_update_rx_prod(edev, rxq); | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_XDP) { | 
|  | rc = qede_start_txq(edev, fp, fp->xdp_tx, i, XDP_PI); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | fp->rxq->xdp_prog = bpf_prog_add(edev->xdp_prog, 1); | 
|  | if (IS_ERR(fp->rxq->xdp_prog)) { | 
|  | rc = PTR_ERR(fp->rxq->xdp_prog); | 
|  | fp->rxq->xdp_prog = NULL; | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fp->type & QEDE_FASTPATH_TX) { | 
|  | rc = qede_start_txq(edev, fp, fp->txq, i, TX_PI(0)); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Prepare and send the vport enable */ | 
|  | memset(&vport_update_params, 0, sizeof(vport_update_params)); | 
|  | vport_update_params.vport_id = start.vport_id; | 
|  | vport_update_params.update_vport_active_flg = 1; | 
|  | vport_update_params.vport_active_flg = 1; | 
|  |  | 
|  | if ((qed_info->mf_mode == QED_MF_NPAR || pci_num_vf(edev->pdev)) && | 
|  | qed_info->tx_switching) { | 
|  | vport_update_params.update_tx_switching_flg = 1; | 
|  | vport_update_params.tx_switching_flg = 1; | 
|  | } | 
|  |  | 
|  | /* Fill struct with RSS params */ | 
|  | if (QEDE_RSS_COUNT(edev) > 1) { | 
|  | vport_update_params.update_rss_flg = 1; | 
|  |  | 
|  | /* Need to validate current RSS config uses valid entries */ | 
|  | for (i = 0; i < QED_RSS_IND_TABLE_SIZE; i++) { | 
|  | if (edev->rss_params.rss_ind_table[i] >= | 
|  | QEDE_RSS_COUNT(edev)) { | 
|  | reset_rss_indir = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!(edev->rss_params_inited & QEDE_RSS_INDIR_INITED) || | 
|  | reset_rss_indir) { | 
|  | u16 val; | 
|  |  | 
|  | for (i = 0; i < QED_RSS_IND_TABLE_SIZE; i++) { | 
|  | u16 indir_val; | 
|  |  | 
|  | val = QEDE_RSS_COUNT(edev); | 
|  | indir_val = ethtool_rxfh_indir_default(i, val); | 
|  | edev->rss_params.rss_ind_table[i] = indir_val; | 
|  | } | 
|  | edev->rss_params_inited |= QEDE_RSS_INDIR_INITED; | 
|  | } | 
|  |  | 
|  | if (!(edev->rss_params_inited & QEDE_RSS_KEY_INITED)) { | 
|  | netdev_rss_key_fill(edev->rss_params.rss_key, | 
|  | sizeof(edev->rss_params.rss_key)); | 
|  | edev->rss_params_inited |= QEDE_RSS_KEY_INITED; | 
|  | } | 
|  |  | 
|  | if (!(edev->rss_params_inited & QEDE_RSS_CAPS_INITED)) { | 
|  | edev->rss_params.rss_caps = QED_RSS_IPV4 | | 
|  | QED_RSS_IPV6 | | 
|  | QED_RSS_IPV4_TCP | | 
|  | QED_RSS_IPV6_TCP; | 
|  | edev->rss_params_inited |= QEDE_RSS_CAPS_INITED; | 
|  | } | 
|  |  | 
|  | memcpy(&vport_update_params.rss_params, &edev->rss_params, | 
|  | sizeof(vport_update_params.rss_params)); | 
|  | } else { | 
|  | memset(&vport_update_params.rss_params, 0, | 
|  | sizeof(vport_update_params.rss_params)); | 
|  | } | 
|  |  | 
|  | rc = edev->ops->vport_update(cdev, &vport_update_params); | 
|  | if (rc) { | 
|  | DP_ERR(edev, "Update V-PORT failed %d\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qede_set_mcast_rx_mac(struct qede_dev *edev, | 
|  | enum qed_filter_xcast_params_type opcode, | 
|  | unsigned char *mac, int num_macs) | 
|  | { | 
|  | struct qed_filter_params filter_cmd; | 
|  | int i; | 
|  |  | 
|  | memset(&filter_cmd, 0, sizeof(filter_cmd)); | 
|  | filter_cmd.type = QED_FILTER_TYPE_MCAST; | 
|  | filter_cmd.filter.mcast.type = opcode; | 
|  | filter_cmd.filter.mcast.num = num_macs; | 
|  |  | 
|  | for (i = 0; i < num_macs; i++, mac += ETH_ALEN) | 
|  | ether_addr_copy(filter_cmd.filter.mcast.mac[i], mac); | 
|  |  | 
|  | return edev->ops->filter_config(edev->cdev, &filter_cmd); | 
|  | } | 
|  |  | 
|  | enum qede_unload_mode { | 
|  | QEDE_UNLOAD_NORMAL, | 
|  | }; | 
|  |  | 
|  | static void qede_unload(struct qede_dev *edev, enum qede_unload_mode mode, | 
|  | bool is_locked) | 
|  | { | 
|  | struct qed_link_params link_params; | 
|  | int rc; | 
|  |  | 
|  | DP_INFO(edev, "Starting qede unload\n"); | 
|  |  | 
|  | if (!is_locked) | 
|  | __qede_lock(edev); | 
|  |  | 
|  | qede_roce_dev_event_close(edev); | 
|  | edev->state = QEDE_STATE_CLOSED; | 
|  |  | 
|  | /* Close OS Tx */ | 
|  | netif_tx_disable(edev->ndev); | 
|  | netif_carrier_off(edev->ndev); | 
|  |  | 
|  | /* Reset the link */ | 
|  | memset(&link_params, 0, sizeof(link_params)); | 
|  | link_params.link_up = false; | 
|  | edev->ops->common->set_link(edev->cdev, &link_params); | 
|  | rc = qede_stop_queues(edev); | 
|  | if (rc) { | 
|  | qede_sync_free_irqs(edev); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | DP_INFO(edev, "Stopped Queues\n"); | 
|  |  | 
|  | qede_vlan_mark_nonconfigured(edev); | 
|  | edev->ops->fastpath_stop(edev->cdev); | 
|  |  | 
|  | /* Release the interrupts */ | 
|  | qede_sync_free_irqs(edev); | 
|  | edev->ops->common->set_fp_int(edev->cdev, 0); | 
|  |  | 
|  | qede_napi_disable_remove(edev); | 
|  |  | 
|  | qede_free_mem_load(edev); | 
|  | qede_free_fp_array(edev); | 
|  |  | 
|  | out: | 
|  | if (!is_locked) | 
|  | __qede_unlock(edev); | 
|  | DP_INFO(edev, "Ending qede unload\n"); | 
|  | } | 
|  |  | 
|  | enum qede_load_mode { | 
|  | QEDE_LOAD_NORMAL, | 
|  | QEDE_LOAD_RELOAD, | 
|  | }; | 
|  |  | 
|  | static int qede_load(struct qede_dev *edev, enum qede_load_mode mode, | 
|  | bool is_locked) | 
|  | { | 
|  | struct qed_link_params link_params; | 
|  | struct qed_link_output link_output; | 
|  | int rc; | 
|  |  | 
|  | DP_INFO(edev, "Starting qede load\n"); | 
|  |  | 
|  | if (!is_locked) | 
|  | __qede_lock(edev); | 
|  |  | 
|  | rc = qede_set_num_queues(edev); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | rc = qede_alloc_fp_array(edev); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | qede_init_fp(edev); | 
|  |  | 
|  | rc = qede_alloc_mem_load(edev); | 
|  | if (rc) | 
|  | goto err1; | 
|  | DP_INFO(edev, "Allocated %d Rx, %d Tx queues\n", | 
|  | QEDE_RSS_COUNT(edev), QEDE_TSS_COUNT(edev)); | 
|  |  | 
|  | rc = qede_set_real_num_queues(edev); | 
|  | if (rc) | 
|  | goto err2; | 
|  |  | 
|  | qede_napi_add_enable(edev); | 
|  | DP_INFO(edev, "Napi added and enabled\n"); | 
|  |  | 
|  | rc = qede_setup_irqs(edev); | 
|  | if (rc) | 
|  | goto err3; | 
|  | DP_INFO(edev, "Setup IRQs succeeded\n"); | 
|  |  | 
|  | rc = qede_start_queues(edev, mode != QEDE_LOAD_RELOAD); | 
|  | if (rc) | 
|  | goto err4; | 
|  | DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n"); | 
|  |  | 
|  | /* Add primary mac and set Rx filters */ | 
|  | ether_addr_copy(edev->primary_mac, edev->ndev->dev_addr); | 
|  |  | 
|  | /* Program un-configured VLANs */ | 
|  | qede_configure_vlan_filters(edev); | 
|  |  | 
|  | /* Ask for link-up using current configuration */ | 
|  | memset(&link_params, 0, sizeof(link_params)); | 
|  | link_params.link_up = true; | 
|  | edev->ops->common->set_link(edev->cdev, &link_params); | 
|  |  | 
|  | /* Query whether link is already-up */ | 
|  | memset(&link_output, 0, sizeof(link_output)); | 
|  | edev->ops->common->get_link(edev->cdev, &link_output); | 
|  | qede_roce_dev_event_open(edev); | 
|  | qede_link_update(edev, &link_output); | 
|  |  | 
|  | edev->state = QEDE_STATE_OPEN; | 
|  |  | 
|  | DP_INFO(edev, "Ending successfully qede load\n"); | 
|  |  | 
|  |  | 
|  | goto out; | 
|  | err4: | 
|  | qede_sync_free_irqs(edev); | 
|  | memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info)); | 
|  | err3: | 
|  | qede_napi_disable_remove(edev); | 
|  | err2: | 
|  | qede_free_mem_load(edev); | 
|  | err1: | 
|  | edev->ops->common->set_fp_int(edev->cdev, 0); | 
|  | qede_free_fp_array(edev); | 
|  | edev->num_queues = 0; | 
|  | edev->fp_num_tx = 0; | 
|  | edev->fp_num_rx = 0; | 
|  | out: | 
|  | if (!is_locked) | 
|  | __qede_unlock(edev); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* 'func' should be able to run between unload and reload assuming interface | 
|  | * is actually running, or afterwards in case it's currently DOWN. | 
|  | */ | 
|  | void qede_reload(struct qede_dev *edev, | 
|  | struct qede_reload_args *args, bool is_locked) | 
|  | { | 
|  | if (!is_locked) | 
|  | __qede_lock(edev); | 
|  |  | 
|  | /* Since qede_lock is held, internal state wouldn't change even | 
|  | * if netdev state would start transitioning. Check whether current | 
|  | * internal configuration indicates device is up, then reload. | 
|  | */ | 
|  | if (edev->state == QEDE_STATE_OPEN) { | 
|  | qede_unload(edev, QEDE_UNLOAD_NORMAL, true); | 
|  | if (args) | 
|  | args->func(edev, args); | 
|  | qede_load(edev, QEDE_LOAD_RELOAD, true); | 
|  |  | 
|  | /* Since no one is going to do it for us, re-configure */ | 
|  | qede_config_rx_mode(edev->ndev); | 
|  | } else if (args) { | 
|  | args->func(edev, args); | 
|  | } | 
|  |  | 
|  | if (!is_locked) | 
|  | __qede_unlock(edev); | 
|  | } | 
|  |  | 
|  | /* called with rtnl_lock */ | 
|  | static int qede_open(struct net_device *ndev) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  | int rc; | 
|  |  | 
|  | netif_carrier_off(ndev); | 
|  |  | 
|  | edev->ops->common->set_power_state(edev->cdev, PCI_D0); | 
|  |  | 
|  | rc = qede_load(edev, QEDE_LOAD_NORMAL, false); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | udp_tunnel_get_rx_info(ndev); | 
|  |  | 
|  | edev->ops->common->update_drv_state(edev->cdev, true); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qede_close(struct net_device *ndev) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  |  | 
|  | qede_unload(edev, QEDE_UNLOAD_NORMAL, false); | 
|  |  | 
|  | edev->ops->common->update_drv_state(edev->cdev, false); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qede_link_update(void *dev, struct qed_link_output *link) | 
|  | { | 
|  | struct qede_dev *edev = dev; | 
|  |  | 
|  | if (!netif_running(edev->ndev)) { | 
|  | DP_VERBOSE(edev, NETIF_MSG_LINK, "Interface is not running\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (link->link_up) { | 
|  | if (!netif_carrier_ok(edev->ndev)) { | 
|  | DP_NOTICE(edev, "Link is up\n"); | 
|  | netif_tx_start_all_queues(edev->ndev); | 
|  | netif_carrier_on(edev->ndev); | 
|  | } | 
|  | } else { | 
|  | if (netif_carrier_ok(edev->ndev)) { | 
|  | DP_NOTICE(edev, "Link is down\n"); | 
|  | netif_tx_disable(edev->ndev); | 
|  | netif_carrier_off(edev->ndev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int qede_set_mac_addr(struct net_device *ndev, void *p) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  | struct sockaddr *addr = p; | 
|  | int rc; | 
|  |  | 
|  | ASSERT_RTNL(); /* @@@TBD To be removed */ | 
|  |  | 
|  | DP_INFO(edev, "Set_mac_addr called\n"); | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) { | 
|  | DP_NOTICE(edev, "The MAC address is not valid\n"); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | if (!edev->ops->check_mac(edev->cdev, addr->sa_data)) { | 
|  | DP_NOTICE(edev, "qed prevents setting MAC\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ether_addr_copy(ndev->dev_addr, addr->sa_data); | 
|  |  | 
|  | if (!netif_running(ndev))  { | 
|  | DP_NOTICE(edev, "The device is currently down\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Remove the previous primary mac */ | 
|  | rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL, | 
|  | edev->primary_mac); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | edev->ops->common->update_mac(edev->cdev, addr->sa_data); | 
|  |  | 
|  | /* Add MAC filter according to the new unicast HW MAC address */ | 
|  | ether_addr_copy(edev->primary_mac, ndev->dev_addr); | 
|  | return qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD, | 
|  | edev->primary_mac); | 
|  | } | 
|  |  | 
|  | static int | 
|  | qede_configure_mcast_filtering(struct net_device *ndev, | 
|  | enum qed_filter_rx_mode_type *accept_flags) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  | unsigned char *mc_macs, *temp; | 
|  | struct netdev_hw_addr *ha; | 
|  | int rc = 0, mc_count; | 
|  | size_t size; | 
|  |  | 
|  | size = 64 * ETH_ALEN; | 
|  |  | 
|  | mc_macs = kzalloc(size, GFP_KERNEL); | 
|  | if (!mc_macs) { | 
|  | DP_NOTICE(edev, | 
|  | "Failed to allocate memory for multicast MACs\n"); | 
|  | rc = -ENOMEM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | temp = mc_macs; | 
|  |  | 
|  | /* Remove all previously configured MAC filters */ | 
|  | rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL, | 
|  | mc_macs, 1); | 
|  | if (rc) | 
|  | goto exit; | 
|  |  | 
|  | netif_addr_lock_bh(ndev); | 
|  |  | 
|  | mc_count = netdev_mc_count(ndev); | 
|  | if (mc_count < 64) { | 
|  | netdev_for_each_mc_addr(ha, ndev) { | 
|  | ether_addr_copy(temp, ha->addr); | 
|  | temp += ETH_ALEN; | 
|  | } | 
|  | } | 
|  |  | 
|  | netif_addr_unlock_bh(ndev); | 
|  |  | 
|  | /* Check for all multicast @@@TBD resource allocation */ | 
|  | if ((ndev->flags & IFF_ALLMULTI) || | 
|  | (mc_count > 64)) { | 
|  | if (*accept_flags == QED_FILTER_RX_MODE_TYPE_REGULAR) | 
|  | *accept_flags = QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC; | 
|  | } else { | 
|  | /* Add all multicast MAC filters */ | 
|  | rc = qede_set_mcast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD, | 
|  | mc_macs, mc_count); | 
|  | } | 
|  |  | 
|  | exit: | 
|  | kfree(mc_macs); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void qede_set_rx_mode(struct net_device *ndev) | 
|  | { | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  |  | 
|  | set_bit(QEDE_SP_RX_MODE, &edev->sp_flags); | 
|  | schedule_delayed_work(&edev->sp_task, 0); | 
|  | } | 
|  |  | 
|  | /* Must be called with qede_lock held */ | 
|  | static void qede_config_rx_mode(struct net_device *ndev) | 
|  | { | 
|  | enum qed_filter_rx_mode_type accept_flags = QED_FILTER_TYPE_UCAST; | 
|  | struct qede_dev *edev = netdev_priv(ndev); | 
|  | struct qed_filter_params rx_mode; | 
|  | unsigned char *uc_macs, *temp; | 
|  | struct netdev_hw_addr *ha; | 
|  | int rc, uc_count; | 
|  | size_t size; | 
|  |  | 
|  | netif_addr_lock_bh(ndev); | 
|  |  | 
|  | uc_count = netdev_uc_count(ndev); | 
|  | size = uc_count * ETH_ALEN; | 
|  |  | 
|  | uc_macs = kzalloc(size, GFP_ATOMIC); | 
|  | if (!uc_macs) { | 
|  | DP_NOTICE(edev, "Failed to allocate memory for unicast MACs\n"); | 
|  | netif_addr_unlock_bh(ndev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | temp = uc_macs; | 
|  | netdev_for_each_uc_addr(ha, ndev) { | 
|  | ether_addr_copy(temp, ha->addr); | 
|  | temp += ETH_ALEN; | 
|  | } | 
|  |  | 
|  | netif_addr_unlock_bh(ndev); | 
|  |  | 
|  | /* Configure the struct for the Rx mode */ | 
|  | memset(&rx_mode, 0, sizeof(struct qed_filter_params)); | 
|  | rx_mode.type = QED_FILTER_TYPE_RX_MODE; | 
|  |  | 
|  | /* Remove all previous unicast secondary macs and multicast macs | 
|  | * (configrue / leave the primary mac) | 
|  | */ | 
|  | rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE, | 
|  | edev->primary_mac); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | /* Check for promiscuous */ | 
|  | if ((ndev->flags & IFF_PROMISC) || | 
|  | (uc_count > edev->dev_info.num_mac_filters - 1)) { | 
|  | accept_flags = QED_FILTER_RX_MODE_TYPE_PROMISC; | 
|  | } else { | 
|  | /* Add MAC filters according to the unicast secondary macs */ | 
|  | int i; | 
|  |  | 
|  | temp = uc_macs; | 
|  | for (i = 0; i < uc_count; i++) { | 
|  | rc = qede_set_ucast_rx_mac(edev, | 
|  | QED_FILTER_XCAST_TYPE_ADD, | 
|  | temp); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | temp += ETH_ALEN; | 
|  | } | 
|  |  | 
|  | rc = qede_configure_mcast_filtering(ndev, &accept_flags); | 
|  | if (rc) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* take care of VLAN mode */ | 
|  | if (ndev->flags & IFF_PROMISC) { | 
|  | qede_config_accept_any_vlan(edev, true); | 
|  | } else if (!edev->non_configured_vlans) { | 
|  | /* It's possible that accept_any_vlan mode is set due to a | 
|  | * previous setting of IFF_PROMISC. If vlan credits are | 
|  | * sufficient, disable accept_any_vlan. | 
|  | */ | 
|  | qede_config_accept_any_vlan(edev, false); | 
|  | } | 
|  |  | 
|  | rx_mode.filter.accept_flags = accept_flags; | 
|  | edev->ops->filter_config(edev->cdev, &rx_mode); | 
|  | out: | 
|  | kfree(uc_macs); | 
|  | } |