| /* | |
| * NET3 Protocol independent device support routines. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * Derived from the non IP parts of dev.c 1.0.19 | |
| * Authors: Ross Biro | |
| * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> | |
| * Mark Evans, <evansmp@uhura.aston.ac.uk> | |
| * | |
| * Additional Authors: | |
| * Florian la Roche <rzsfl@rz.uni-sb.de> | |
| * Alan Cox <gw4pts@gw4pts.ampr.org> | |
| * David Hinds <dahinds@users.sourceforge.net> | |
| * Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> | |
| * Adam Sulmicki <adam@cfar.umd.edu> | |
| * Pekka Riikonen <priikone@poesidon.pspt.fi> | |
| * | |
| * Changes: | |
| * D.J. Barrow : Fixed bug where dev->refcnt gets set | |
| * to 2 if register_netdev gets called | |
| * before net_dev_init & also removed a | |
| * few lines of code in the process. | |
| * Alan Cox : device private ioctl copies fields back. | |
| * Alan Cox : Transmit queue code does relevant | |
| * stunts to keep the queue safe. | |
| * Alan Cox : Fixed double lock. | |
| * Alan Cox : Fixed promisc NULL pointer trap | |
| * ???????? : Support the full private ioctl range | |
| * Alan Cox : Moved ioctl permission check into | |
| * drivers | |
| * Tim Kordas : SIOCADDMULTI/SIOCDELMULTI | |
| * Alan Cox : 100 backlog just doesn't cut it when | |
| * you start doing multicast video 8) | |
| * Alan Cox : Rewrote net_bh and list manager. | |
| * Alan Cox : Fix ETH_P_ALL echoback lengths. | |
| * Alan Cox : Took out transmit every packet pass | |
| * Saved a few bytes in the ioctl handler | |
| * Alan Cox : Network driver sets packet type before | |
| * calling netif_rx. Saves a function | |
| * call a packet. | |
| * Alan Cox : Hashed net_bh() | |
| * Richard Kooijman: Timestamp fixes. | |
| * Alan Cox : Wrong field in SIOCGIFDSTADDR | |
| * Alan Cox : Device lock protection. | |
| * Alan Cox : Fixed nasty side effect of device close | |
| * changes. | |
| * Rudi Cilibrasi : Pass the right thing to | |
| * set_mac_address() | |
| * Dave Miller : 32bit quantity for the device lock to | |
| * make it work out on a Sparc. | |
| * Bjorn Ekwall : Added KERNELD hack. | |
| * Alan Cox : Cleaned up the backlog initialise. | |
| * Craig Metz : SIOCGIFCONF fix if space for under | |
| * 1 device. | |
| * Thomas Bogendoerfer : Return ENODEV for dev_open, if there | |
| * is no device open function. | |
| * Andi Kleen : Fix error reporting for SIOCGIFCONF | |
| * Michael Chastain : Fix signed/unsigned for SIOCGIFCONF | |
| * Cyrus Durgin : Cleaned for KMOD | |
| * Adam Sulmicki : Bug Fix : Network Device Unload | |
| * A network device unload needs to purge | |
| * the backlog queue. | |
| * Paul Rusty Russell : SIOCSIFNAME | |
| * Pekka Riikonen : Netdev boot-time settings code | |
| * Andrew Morton : Make unregister_netdevice wait | |
| * indefinitely on dev->refcnt | |
| * J Hadi Salim : - Backlog queue sampling | |
| * - netif_rx() feedback | |
| */ | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #include <linux/bitops.h> | |
| #include <linux/capability.h> | |
| #include <linux/cpu.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/mutex.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/socket.h> | |
| #include <linux/sockios.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/notifier.h> | |
| #include <linux/skbuff.h> | |
| #include <net/net_namespace.h> | |
| #include <net/sock.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/stat.h> | |
| #include <linux/if_bridge.h> | |
| #include <linux/if_macvlan.h> | |
| #include <net/dst.h> | |
| #include <net/pkt_sched.h> | |
| #include <net/checksum.h> | |
| #include <linux/highmem.h> | |
| #include <linux/init.h> | |
| #include <linux/kmod.h> | |
| #include <linux/module.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/netpoll.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/delay.h> | |
| #include <net/wext.h> | |
| #include <net/iw_handler.h> | |
| #include <asm/current.h> | |
| #include <linux/audit.h> | |
| #include <linux/dmaengine.h> | |
| #include <linux/err.h> | |
| #include <linux/ctype.h> | |
| #include <linux/if_arp.h> | |
| /* | |
| * The list of packet types we will receive (as opposed to discard) | |
| * and the routines to invoke. | |
| * | |
| * Why 16. Because with 16 the only overlap we get on a hash of the | |
| * low nibble of the protocol value is RARP/SNAP/X.25. | |
| * | |
| * NOTE: That is no longer true with the addition of VLAN tags. Not | |
| * sure which should go first, but I bet it won't make much | |
| * difference if we are running VLANs. The good news is that | |
| * this protocol won't be in the list unless compiled in, so | |
| * the average user (w/out VLANs) will not be adversely affected. | |
| * --BLG | |
| * | |
| * 0800 IP | |
| * 8100 802.1Q VLAN | |
| * 0001 802.3 | |
| * 0002 AX.25 | |
| * 0004 802.2 | |
| * 8035 RARP | |
| * 0005 SNAP | |
| * 0805 X.25 | |
| * 0806 ARP | |
| * 8137 IPX | |
| * 0009 Localtalk | |
| * 86DD IPv6 | |
| */ | |
| static DEFINE_SPINLOCK(ptype_lock); | |
| static struct list_head ptype_base[16] __read_mostly; /* 16 way hashed list */ | |
| static struct list_head ptype_all __read_mostly; /* Taps */ | |
| #ifdef CONFIG_NET_DMA | |
| struct net_dma { | |
| struct dma_client client; | |
| spinlock_t lock; | |
| cpumask_t channel_mask; | |
| struct dma_chan *channels[NR_CPUS]; | |
| }; | |
| static enum dma_state_client | |
| netdev_dma_event(struct dma_client *client, struct dma_chan *chan, | |
| enum dma_state state); | |
| static struct net_dma net_dma = { | |
| .client = { | |
| .event_callback = netdev_dma_event, | |
| }, | |
| }; | |
| #endif | |
| /* | |
| * The @dev_base_head list is protected by @dev_base_lock and the rtnl | |
| * semaphore. | |
| * | |
| * Pure readers hold dev_base_lock for reading. | |
| * | |
| * Writers must hold the rtnl semaphore while they loop through the | |
| * dev_base_head list, and hold dev_base_lock for writing when they do the | |
| * actual updates. This allows pure readers to access the list even | |
| * while a writer is preparing to update it. | |
| * | |
| * To put it another way, dev_base_lock is held for writing only to | |
| * protect against pure readers; the rtnl semaphore provides the | |
| * protection against other writers. | |
| * | |
| * See, for example usages, register_netdevice() and | |
| * unregister_netdevice(), which must be called with the rtnl | |
| * semaphore held. | |
| */ | |
| DEFINE_RWLOCK(dev_base_lock); | |
| EXPORT_SYMBOL(dev_base_lock); | |
| #define NETDEV_HASHBITS 8 | |
| #define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS) | |
| static inline struct hlist_head *dev_name_hash(struct net *net, const char *name) | |
| { | |
| unsigned hash = full_name_hash(name, strnlen(name, IFNAMSIZ)); | |
| return &net->dev_name_head[hash & ((1 << NETDEV_HASHBITS) - 1)]; | |
| } | |
| static inline struct hlist_head *dev_index_hash(struct net *net, int ifindex) | |
| { | |
| return &net->dev_index_head[ifindex & ((1 << NETDEV_HASHBITS) - 1)]; | |
| } | |
| /* Device list insertion */ | |
| static int list_netdevice(struct net_device *dev) | |
| { | |
| struct net *net = dev->nd_net; | |
| ASSERT_RTNL(); | |
| write_lock_bh(&dev_base_lock); | |
| list_add_tail(&dev->dev_list, &net->dev_base_head); | |
| hlist_add_head(&dev->name_hlist, dev_name_hash(net, dev->name)); | |
| hlist_add_head(&dev->index_hlist, dev_index_hash(net, dev->ifindex)); | |
| write_unlock_bh(&dev_base_lock); | |
| return 0; | |
| } | |
| /* Device list removal */ | |
| static void unlist_netdevice(struct net_device *dev) | |
| { | |
| ASSERT_RTNL(); | |
| /* Unlink dev from the device chain */ | |
| write_lock_bh(&dev_base_lock); | |
| list_del(&dev->dev_list); | |
| hlist_del(&dev->name_hlist); | |
| hlist_del(&dev->index_hlist); | |
| write_unlock_bh(&dev_base_lock); | |
| } | |
| /* | |
| * Our notifier list | |
| */ | |
| static RAW_NOTIFIER_HEAD(netdev_chain); | |
| /* | |
| * Device drivers call our routines to queue packets here. We empty the | |
| * queue in the local softnet handler. | |
| */ | |
| DEFINE_PER_CPU(struct softnet_data, softnet_data); | |
| extern int netdev_kobject_init(void); | |
| extern int netdev_register_kobject(struct net_device *); | |
| extern void netdev_unregister_kobject(struct net_device *); | |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC | |
| /* | |
| * register_netdevice() inits dev->_xmit_lock and sets lockdep class | |
| * according to dev->type | |
| */ | |
| static const unsigned short netdev_lock_type[] = | |
| {ARPHRD_NETROM, ARPHRD_ETHER, ARPHRD_EETHER, ARPHRD_AX25, | |
| ARPHRD_PRONET, ARPHRD_CHAOS, ARPHRD_IEEE802, ARPHRD_ARCNET, | |
| ARPHRD_APPLETLK, ARPHRD_DLCI, ARPHRD_ATM, ARPHRD_METRICOM, | |
| ARPHRD_IEEE1394, ARPHRD_EUI64, ARPHRD_INFINIBAND, ARPHRD_SLIP, | |
| ARPHRD_CSLIP, ARPHRD_SLIP6, ARPHRD_CSLIP6, ARPHRD_RSRVD, | |
| ARPHRD_ADAPT, ARPHRD_ROSE, ARPHRD_X25, ARPHRD_HWX25, | |
| ARPHRD_PPP, ARPHRD_CISCO, ARPHRD_LAPB, ARPHRD_DDCMP, | |
| ARPHRD_RAWHDLC, ARPHRD_TUNNEL, ARPHRD_TUNNEL6, ARPHRD_FRAD, | |
| ARPHRD_SKIP, ARPHRD_LOOPBACK, ARPHRD_LOCALTLK, ARPHRD_FDDI, | |
| ARPHRD_BIF, ARPHRD_SIT, ARPHRD_IPDDP, ARPHRD_IPGRE, | |
| ARPHRD_PIMREG, ARPHRD_HIPPI, ARPHRD_ASH, ARPHRD_ECONET, | |
| ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL, | |
| ARPHRD_FCFABRIC, ARPHRD_IEEE802_TR, ARPHRD_IEEE80211, | |
| ARPHRD_IEEE80211_PRISM, ARPHRD_IEEE80211_RADIOTAP, ARPHRD_VOID, | |
| ARPHRD_NONE}; | |
| static const char *netdev_lock_name[] = | |
| {"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25", | |
| "_xmit_PRONET", "_xmit_CHAOS", "_xmit_IEEE802", "_xmit_ARCNET", | |
| "_xmit_APPLETLK", "_xmit_DLCI", "_xmit_ATM", "_xmit_METRICOM", | |
| "_xmit_IEEE1394", "_xmit_EUI64", "_xmit_INFINIBAND", "_xmit_SLIP", | |
| "_xmit_CSLIP", "_xmit_SLIP6", "_xmit_CSLIP6", "_xmit_RSRVD", | |
| "_xmit_ADAPT", "_xmit_ROSE", "_xmit_X25", "_xmit_HWX25", | |
| "_xmit_PPP", "_xmit_CISCO", "_xmit_LAPB", "_xmit_DDCMP", | |
| "_xmit_RAWHDLC", "_xmit_TUNNEL", "_xmit_TUNNEL6", "_xmit_FRAD", | |
| "_xmit_SKIP", "_xmit_LOOPBACK", "_xmit_LOCALTLK", "_xmit_FDDI", | |
| "_xmit_BIF", "_xmit_SIT", "_xmit_IPDDP", "_xmit_IPGRE", | |
| "_xmit_PIMREG", "_xmit_HIPPI", "_xmit_ASH", "_xmit_ECONET", | |
| "_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL", | |
| "_xmit_FCFABRIC", "_xmit_IEEE802_TR", "_xmit_IEEE80211", | |
| "_xmit_IEEE80211_PRISM", "_xmit_IEEE80211_RADIOTAP", "_xmit_VOID", | |
| "_xmit_NONE"}; | |
| static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)]; | |
| static inline unsigned short netdev_lock_pos(unsigned short dev_type) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(netdev_lock_type); i++) | |
| if (netdev_lock_type[i] == dev_type) | |
| return i; | |
| /* the last key is used by default */ | |
| return ARRAY_SIZE(netdev_lock_type) - 1; | |
| } | |
| static inline void netdev_set_lockdep_class(spinlock_t *lock, | |
| unsigned short dev_type) | |
| { | |
| int i; | |
| i = netdev_lock_pos(dev_type); | |
| lockdep_set_class_and_name(lock, &netdev_xmit_lock_key[i], | |
| netdev_lock_name[i]); | |
| } | |
| #else | |
| static inline void netdev_set_lockdep_class(spinlock_t *lock, | |
| unsigned short dev_type) | |
| { | |
| } | |
| #endif | |
| /******************************************************************************* | |
| Protocol management and registration routines | |
| *******************************************************************************/ | |
| /* | |
| * Add a protocol ID to the list. Now that the input handler is | |
| * smarter we can dispense with all the messy stuff that used to be | |
| * here. | |
| * | |
| * BEWARE!!! Protocol handlers, mangling input packets, | |
| * MUST BE last in hash buckets and checking protocol handlers | |
| * MUST start from promiscuous ptype_all chain in net_bh. | |
| * It is true now, do not change it. | |
| * Explanation follows: if protocol handler, mangling packet, will | |
| * be the first on list, it is not able to sense, that packet | |
| * is cloned and should be copied-on-write, so that it will | |
| * change it and subsequent readers will get broken packet. | |
| * --ANK (980803) | |
| */ | |
| /** | |
| * dev_add_pack - add packet handler | |
| * @pt: packet type declaration | |
| * | |
| * Add a protocol handler to the networking stack. The passed &packet_type | |
| * is linked into kernel lists and may not be freed until it has been | |
| * removed from the kernel lists. | |
| * | |
| * This call does not sleep therefore it can not | |
| * guarantee all CPU's that are in middle of receiving packets | |
| * will see the new packet type (until the next received packet). | |
| */ | |
| void dev_add_pack(struct packet_type *pt) | |
| { | |
| int hash; | |
| spin_lock_bh(&ptype_lock); | |
| if (pt->type == htons(ETH_P_ALL)) | |
| list_add_rcu(&pt->list, &ptype_all); | |
| else { | |
| hash = ntohs(pt->type) & 15; | |
| list_add_rcu(&pt->list, &ptype_base[hash]); | |
| } | |
| spin_unlock_bh(&ptype_lock); | |
| } | |
| /** | |
| * __dev_remove_pack - remove packet handler | |
| * @pt: packet type declaration | |
| * | |
| * Remove a protocol handler that was previously added to the kernel | |
| * protocol handlers by dev_add_pack(). The passed &packet_type is removed | |
| * from the kernel lists and can be freed or reused once this function | |
| * returns. | |
| * | |
| * The packet type might still be in use by receivers | |
| * and must not be freed until after all the CPU's have gone | |
| * through a quiescent state. | |
| */ | |
| void __dev_remove_pack(struct packet_type *pt) | |
| { | |
| struct list_head *head; | |
| struct packet_type *pt1; | |
| spin_lock_bh(&ptype_lock); | |
| if (pt->type == htons(ETH_P_ALL)) | |
| head = &ptype_all; | |
| else | |
| head = &ptype_base[ntohs(pt->type) & 15]; | |
| list_for_each_entry(pt1, head, list) { | |
| if (pt == pt1) { | |
| list_del_rcu(&pt->list); | |
| goto out; | |
| } | |
| } | |
| printk(KERN_WARNING "dev_remove_pack: %p not found.\n", pt); | |
| out: | |
| spin_unlock_bh(&ptype_lock); | |
| } | |
| /** | |
| * dev_remove_pack - remove packet handler | |
| * @pt: packet type declaration | |
| * | |
| * Remove a protocol handler that was previously added to the kernel | |
| * protocol handlers by dev_add_pack(). The passed &packet_type is removed | |
| * from the kernel lists and can be freed or reused once this function | |
| * returns. | |
| * | |
| * This call sleeps to guarantee that no CPU is looking at the packet | |
| * type after return. | |
| */ | |
| void dev_remove_pack(struct packet_type *pt) | |
| { | |
| __dev_remove_pack(pt); | |
| synchronize_net(); | |
| } | |
| /****************************************************************************** | |
| Device Boot-time Settings Routines | |
| *******************************************************************************/ | |
| /* Boot time configuration table */ | |
| static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX]; | |
| /** | |
| * netdev_boot_setup_add - add new setup entry | |
| * @name: name of the device | |
| * @map: configured settings for the device | |
| * | |
| * Adds new setup entry to the dev_boot_setup list. The function | |
| * returns 0 on error and 1 on success. This is a generic routine to | |
| * all netdevices. | |
| */ | |
| static int netdev_boot_setup_add(char *name, struct ifmap *map) | |
| { | |
| struct netdev_boot_setup *s; | |
| int i; | |
| s = dev_boot_setup; | |
| for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { | |
| if (s[i].name[0] == '\0' || s[i].name[0] == ' ') { | |
| memset(s[i].name, 0, sizeof(s[i].name)); | |
| strcpy(s[i].name, name); | |
| memcpy(&s[i].map, map, sizeof(s[i].map)); | |
| break; | |
| } | |
| } | |
| return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1; | |
| } | |
| /** | |
| * netdev_boot_setup_check - check boot time settings | |
| * @dev: the netdevice | |
| * | |
| * Check boot time settings for the device. | |
| * The found settings are set for the device to be used | |
| * later in the device probing. | |
| * Returns 0 if no settings found, 1 if they are. | |
| */ | |
| int netdev_boot_setup_check(struct net_device *dev) | |
| { | |
| struct netdev_boot_setup *s = dev_boot_setup; | |
| int i; | |
| for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { | |
| if (s[i].name[0] != '\0' && s[i].name[0] != ' ' && | |
| !strncmp(dev->name, s[i].name, strlen(s[i].name))) { | |
| dev->irq = s[i].map.irq; | |
| dev->base_addr = s[i].map.base_addr; | |
| dev->mem_start = s[i].map.mem_start; | |
| dev->mem_end = s[i].map.mem_end; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * netdev_boot_base - get address from boot time settings | |
| * @prefix: prefix for network device | |
| * @unit: id for network device | |
| * | |
| * Check boot time settings for the base address of device. | |
| * The found settings are set for the device to be used | |
| * later in the device probing. | |
| * Returns 0 if no settings found. | |
| */ | |
| unsigned long netdev_boot_base(const char *prefix, int unit) | |
| { | |
| const struct netdev_boot_setup *s = dev_boot_setup; | |
| char name[IFNAMSIZ]; | |
| int i; | |
| sprintf(name, "%s%d", prefix, unit); | |
| /* | |
| * If device already registered then return base of 1 | |
| * to indicate not to probe for this interface | |
| */ | |
| if (__dev_get_by_name(&init_net, name)) | |
| return 1; | |
| for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) | |
| if (!strcmp(name, s[i].name)) | |
| return s[i].map.base_addr; | |
| return 0; | |
| } | |
| /* | |
| * Saves at boot time configured settings for any netdevice. | |
| */ | |
| int __init netdev_boot_setup(char *str) | |
| { | |
| int ints[5]; | |
| struct ifmap map; | |
| str = get_options(str, ARRAY_SIZE(ints), ints); | |
| if (!str || !*str) | |
| return 0; | |
| /* Save settings */ | |
| memset(&map, 0, sizeof(map)); | |
| if (ints[0] > 0) | |
| map.irq = ints[1]; | |
| if (ints[0] > 1) | |
| map.base_addr = ints[2]; | |
| if (ints[0] > 2) | |
| map.mem_start = ints[3]; | |
| if (ints[0] > 3) | |
| map.mem_end = ints[4]; | |
| /* Add new entry to the list */ | |
| return netdev_boot_setup_add(str, &map); | |
| } | |
| __setup("netdev=", netdev_boot_setup); | |
| /******************************************************************************* | |
| Device Interface Subroutines | |
| *******************************************************************************/ | |
| /** | |
| * __dev_get_by_name - find a device by its name | |
| * @name: name to find | |
| * | |
| * Find an interface by name. Must be called under RTNL semaphore | |
| * or @dev_base_lock. If the name is found a pointer to the device | |
| * is returned. If the name is not found then %NULL is returned. The | |
| * reference counters are not incremented so the caller must be | |
| * careful with locks. | |
| */ | |
| struct net_device *__dev_get_by_name(struct net *net, const char *name) | |
| { | |
| struct hlist_node *p; | |
| hlist_for_each(p, dev_name_hash(net, name)) { | |
| struct net_device *dev | |
| = hlist_entry(p, struct net_device, name_hlist); | |
| if (!strncmp(dev->name, name, IFNAMSIZ)) | |
| return dev; | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * dev_get_by_name - find a device by its name | |
| * @name: name to find | |
| * | |
| * Find an interface by name. This can be called from any | |
| * context and does its own locking. The returned handle has | |
| * the usage count incremented and the caller must use dev_put() to | |
| * release it when it is no longer needed. %NULL is returned if no | |
| * matching device is found. | |
| */ | |
| struct net_device *dev_get_by_name(struct net *net, const char *name) | |
| { | |
| struct net_device *dev; | |
| read_lock(&dev_base_lock); | |
| dev = __dev_get_by_name(net, name); | |
| if (dev) | |
| dev_hold(dev); | |
| read_unlock(&dev_base_lock); | |
| return dev; | |
| } | |
| /** | |
| * __dev_get_by_index - find a device by its ifindex | |
| * @ifindex: index of device | |
| * | |
| * Search for an interface by index. Returns %NULL if the device | |
| * is not found or a pointer to the device. The device has not | |
| * had its reference counter increased so the caller must be careful | |
| * about locking. The caller must hold either the RTNL semaphore | |
| * or @dev_base_lock. | |
| */ | |
| struct net_device *__dev_get_by_index(struct net *net, int ifindex) | |
| { | |
| struct hlist_node *p; | |
| hlist_for_each(p, dev_index_hash(net, ifindex)) { | |
| struct net_device *dev | |
| = hlist_entry(p, struct net_device, index_hlist); | |
| if (dev->ifindex == ifindex) | |
| return dev; | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * dev_get_by_index - find a device by its ifindex | |
| * @ifindex: index of device | |
| * | |
| * Search for an interface by index. Returns NULL if the device | |
| * is not found or a pointer to the device. The device returned has | |
| * had a reference added and the pointer is safe until the user calls | |
| * dev_put to indicate they have finished with it. | |
| */ | |
| struct net_device *dev_get_by_index(struct net *net, int ifindex) | |
| { | |
| struct net_device *dev; | |
| read_lock(&dev_base_lock); | |
| dev = __dev_get_by_index(net, ifindex); | |
| if (dev) | |
| dev_hold(dev); | |
| read_unlock(&dev_base_lock); | |
| return dev; | |
| } | |
| /** | |
| * dev_getbyhwaddr - find a device by its hardware address | |
| * @type: media type of device | |
| * @ha: hardware address | |
| * | |
| * Search for an interface by MAC address. Returns NULL if the device | |
| * is not found or a pointer to the device. The caller must hold the | |
| * rtnl semaphore. The returned device has not had its ref count increased | |
| * and the caller must therefore be careful about locking | |
| * | |
| * BUGS: | |
| * If the API was consistent this would be __dev_get_by_hwaddr | |
| */ | |
| struct net_device *dev_getbyhwaddr(struct net *net, unsigned short type, char *ha) | |
| { | |
| struct net_device *dev; | |
| ASSERT_RTNL(); | |
| for_each_netdev(&init_net, dev) | |
| if (dev->type == type && | |
| !memcmp(dev->dev_addr, ha, dev->addr_len)) | |
| return dev; | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(dev_getbyhwaddr); | |
| struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type) | |
| { | |
| struct net_device *dev; | |
| ASSERT_RTNL(); | |
| for_each_netdev(net, dev) | |
| if (dev->type == type) | |
| return dev; | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(__dev_getfirstbyhwtype); | |
| struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type) | |
| { | |
| struct net_device *dev; | |
| rtnl_lock(); | |
| dev = __dev_getfirstbyhwtype(net, type); | |
| if (dev) | |
| dev_hold(dev); | |
| rtnl_unlock(); | |
| return dev; | |
| } | |
| EXPORT_SYMBOL(dev_getfirstbyhwtype); | |
| /** | |
| * dev_get_by_flags - find any device with given flags | |
| * @if_flags: IFF_* values | |
| * @mask: bitmask of bits in if_flags to check | |
| * | |
| * Search for any interface with the given flags. Returns NULL if a device | |
| * is not found or a pointer to the device. The device returned has | |
| * had a reference added and the pointer is safe until the user calls | |
| * dev_put to indicate they have finished with it. | |
| */ | |
| struct net_device * dev_get_by_flags(struct net *net, unsigned short if_flags, unsigned short mask) | |
| { | |
| struct net_device *dev, *ret; | |
| ret = NULL; | |
| read_lock(&dev_base_lock); | |
| for_each_netdev(net, dev) { | |
| if (((dev->flags ^ if_flags) & mask) == 0) { | |
| dev_hold(dev); | |
| ret = dev; | |
| break; | |
| } | |
| } | |
| read_unlock(&dev_base_lock); | |
| return ret; | |
| } | |
| /** | |
| * dev_valid_name - check if name is okay for network device | |
| * @name: name string | |
| * | |
| * Network device names need to be valid file names to | |
| * to allow sysfs to work. We also disallow any kind of | |
| * whitespace. | |
| */ | |
| int dev_valid_name(const char *name) | |
| { | |
| if (*name == '\0') | |
| return 0; | |
| if (strlen(name) >= IFNAMSIZ) | |
| return 0; | |
| if (!strcmp(name, ".") || !strcmp(name, "..")) | |
| return 0; | |
| while (*name) { | |
| if (*name == '/' || isspace(*name)) | |
| return 0; | |
| name++; | |
| } | |
| return 1; | |
| } | |
| /** | |
| * __dev_alloc_name - allocate a name for a device | |
| * @net: network namespace to allocate the device name in | |
| * @name: name format string | |
| * @buf: scratch buffer and result name string | |
| * | |
| * Passed a format string - eg "lt%d" it will try and find a suitable | |
| * id. It scans list of devices to build up a free map, then chooses | |
| * the first empty slot. The caller must hold the dev_base or rtnl lock | |
| * while allocating the name and adding the device in order to avoid | |
| * duplicates. | |
| * Limited to bits_per_byte * page size devices (ie 32K on most platforms). | |
| * Returns the number of the unit assigned or a negative errno code. | |
| */ | |
| static int __dev_alloc_name(struct net *net, const char *name, char *buf) | |
| { | |
| int i = 0; | |
| const char *p; | |
| const int max_netdevices = 8*PAGE_SIZE; | |
| unsigned long *inuse; | |
| struct net_device *d; | |
| p = strnchr(name, IFNAMSIZ-1, '%'); | |
| if (p) { | |
| /* | |
| * Verify the string as this thing may have come from | |
| * the user. There must be either one "%d" and no other "%" | |
| * characters. | |
| */ | |
| if (p[1] != 'd' || strchr(p + 2, '%')) | |
| return -EINVAL; | |
| /* Use one page as a bit array of possible slots */ | |
| inuse = (unsigned long *) get_zeroed_page(GFP_ATOMIC); | |
| if (!inuse) | |
| return -ENOMEM; | |
| for_each_netdev(net, d) { | |
| if (!sscanf(d->name, name, &i)) | |
| continue; | |
| if (i < 0 || i >= max_netdevices) | |
| continue; | |
| /* avoid cases where sscanf is not exact inverse of printf */ | |
| snprintf(buf, IFNAMSIZ, name, i); | |
| if (!strncmp(buf, d->name, IFNAMSIZ)) | |
| set_bit(i, inuse); | |
| } | |
| i = find_first_zero_bit(inuse, max_netdevices); | |
| free_page((unsigned long) inuse); | |
| } | |
| snprintf(buf, IFNAMSIZ, name, i); | |
| if (!__dev_get_by_name(net, buf)) | |
| return i; | |
| /* It is possible to run out of possible slots | |
| * when the name is long and there isn't enough space left | |
| * for the digits, or if all bits are used. | |
| */ | |
| return -ENFILE; | |
| } | |
| /** | |
| * dev_alloc_name - allocate a name for a device | |
| * @dev: device | |
| * @name: name format string | |
| * | |
| * Passed a format string - eg "lt%d" it will try and find a suitable | |
| * id. It scans list of devices to build up a free map, then chooses | |
| * the first empty slot. The caller must hold the dev_base or rtnl lock | |
| * while allocating the name and adding the device in order to avoid | |
| * duplicates. | |
| * Limited to bits_per_byte * page size devices (ie 32K on most platforms). | |
| * Returns the number of the unit assigned or a negative errno code. | |
| */ | |
| int dev_alloc_name(struct net_device *dev, const char *name) | |
| { | |
| char buf[IFNAMSIZ]; | |
| struct net *net; | |
| int ret; | |
| BUG_ON(!dev->nd_net); | |
| net = dev->nd_net; | |
| ret = __dev_alloc_name(net, name, buf); | |
| if (ret >= 0) | |
| strlcpy(dev->name, buf, IFNAMSIZ); | |
| return ret; | |
| } | |
| /** | |
| * dev_change_name - change name of a device | |
| * @dev: device | |
| * @newname: name (or format string) must be at least IFNAMSIZ | |
| * | |
| * Change name of a device, can pass format strings "eth%d". | |
| * for wildcarding. | |
| */ | |
| int dev_change_name(struct net_device *dev, char *newname) | |
| { | |
| char oldname[IFNAMSIZ]; | |
| int err = 0; | |
| int ret; | |
| struct net *net; | |
| ASSERT_RTNL(); | |
| BUG_ON(!dev->nd_net); | |
| net = dev->nd_net; | |
| if (dev->flags & IFF_UP) | |
| return -EBUSY; | |
| if (!dev_valid_name(newname)) | |
| return -EINVAL; | |
| memcpy(oldname, dev->name, IFNAMSIZ); | |
| if (strchr(newname, '%')) { | |
| err = dev_alloc_name(dev, newname); | |
| if (err < 0) | |
| return err; | |
| strcpy(newname, dev->name); | |
| } | |
| else if (__dev_get_by_name(net, newname)) | |
| return -EEXIST; | |
| else | |
| strlcpy(dev->name, newname, IFNAMSIZ); | |
| rollback: | |
| device_rename(&dev->dev, dev->name); | |
| write_lock_bh(&dev_base_lock); | |
| hlist_del(&dev->name_hlist); | |
| hlist_add_head(&dev->name_hlist, dev_name_hash(net, dev->name)); | |
| write_unlock_bh(&dev_base_lock); | |
| ret = call_netdevice_notifiers(NETDEV_CHANGENAME, dev); | |
| ret = notifier_to_errno(ret); | |
| if (ret) { | |
| if (err) { | |
| printk(KERN_ERR | |
| "%s: name change rollback failed: %d.\n", | |
| dev->name, ret); | |
| } else { | |
| err = ret; | |
| memcpy(dev->name, oldname, IFNAMSIZ); | |
| goto rollback; | |
| } | |
| } | |
| return err; | |
| } | |
| /** | |
| * netdev_features_change - device changes features | |
| * @dev: device to cause notification | |
| * | |
| * Called to indicate a device has changed features. | |
| */ | |
| void netdev_features_change(struct net_device *dev) | |
| { | |
| call_netdevice_notifiers(NETDEV_FEAT_CHANGE, dev); | |
| } | |
| EXPORT_SYMBOL(netdev_features_change); | |
| /** | |
| * netdev_state_change - device changes state | |
| * @dev: device to cause notification | |
| * | |
| * Called to indicate a device has changed state. This function calls | |
| * the notifier chains for netdev_chain and sends a NEWLINK message | |
| * to the routing socket. | |
| */ | |
| void netdev_state_change(struct net_device *dev) | |
| { | |
| if (dev->flags & IFF_UP) { | |
| call_netdevice_notifiers(NETDEV_CHANGE, dev); | |
| rtmsg_ifinfo(RTM_NEWLINK, dev, 0); | |
| } | |
| } | |
| /** | |
| * dev_load - load a network module | |
| * @name: name of interface | |
| * | |
| * If a network interface is not present and the process has suitable | |
| * privileges this function loads the module. If module loading is not | |
| * available in this kernel then it becomes a nop. | |
| */ | |
| void dev_load(struct net *net, const char *name) | |
| { | |
| struct net_device *dev; | |
| read_lock(&dev_base_lock); | |
| dev = __dev_get_by_name(net, name); | |
| read_unlock(&dev_base_lock); | |
| if (!dev && capable(CAP_SYS_MODULE)) | |
| request_module("%s", name); | |
| } | |
| /** | |
| * dev_open - prepare an interface for use. | |
| * @dev: device to open | |
| * | |
| * Takes a device from down to up state. The device's private open | |
| * function is invoked and then the multicast lists are loaded. Finally | |
| * the device is moved into the up state and a %NETDEV_UP message is | |
| * sent to the netdev notifier chain. | |
| * | |
| * Calling this function on an active interface is a nop. On a failure | |
| * a negative errno code is returned. | |
| */ | |
| int dev_open(struct net_device *dev) | |
| { | |
| int ret = 0; | |
| /* | |
| * Is it already up? | |
| */ | |
| if (dev->flags & IFF_UP) | |
| return 0; | |
| /* | |
| * Is it even present? | |
| */ | |
| if (!netif_device_present(dev)) | |
| return -ENODEV; | |
| /* | |
| * Call device private open method | |
| */ | |
| set_bit(__LINK_STATE_START, &dev->state); | |
| if (dev->open) { | |
| ret = dev->open(dev); | |
| if (ret) | |
| clear_bit(__LINK_STATE_START, &dev->state); | |
| } | |
| /* | |
| * If it went open OK then: | |
| */ | |
| if (!ret) { | |
| /* | |
| * Set the flags. | |
| */ | |
| dev->flags |= IFF_UP; | |
| /* | |
| * Initialize multicasting status | |
| */ | |
| dev_set_rx_mode(dev); | |
| /* | |
| * Wakeup transmit queue engine | |
| */ | |
| dev_activate(dev); | |
| /* | |
| * ... and announce new interface. | |
| */ | |
| call_netdevice_notifiers(NETDEV_UP, dev); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * dev_close - shutdown an interface. | |
| * @dev: device to shutdown | |
| * | |
| * This function moves an active device into down state. A | |
| * %NETDEV_GOING_DOWN is sent to the netdev notifier chain. The device | |
| * is then deactivated and finally a %NETDEV_DOWN is sent to the notifier | |
| * chain. | |
| */ | |
| int dev_close(struct net_device *dev) | |
| { | |
| might_sleep(); | |
| if (!(dev->flags & IFF_UP)) | |
| return 0; | |
| /* | |
| * Tell people we are going down, so that they can | |
| * prepare to death, when device is still operating. | |
| */ | |
| call_netdevice_notifiers(NETDEV_GOING_DOWN, dev); | |
| dev_deactivate(dev); | |
| clear_bit(__LINK_STATE_START, &dev->state); | |
| /* Synchronize to scheduled poll. We cannot touch poll list, | |
| * it can be even on different cpu. So just clear netif_running(). | |
| * | |
| * dev->stop() will invoke napi_disable() on all of it's | |
| * napi_struct instances on this device. | |
| */ | |
| smp_mb__after_clear_bit(); /* Commit netif_running(). */ | |
| /* | |
| * Call the device specific close. This cannot fail. | |
| * Only if device is UP | |
| * | |
| * We allow it to be called even after a DETACH hot-plug | |
| * event. | |
| */ | |
| if (dev->stop) | |
| dev->stop(dev); | |
| /* | |
| * Device is now down. | |
| */ | |
| dev->flags &= ~IFF_UP; | |
| /* | |
| * Tell people we are down | |
| */ | |
| call_netdevice_notifiers(NETDEV_DOWN, dev); | |
| return 0; | |
| } | |
| static int dev_boot_phase = 1; | |
| /* | |
| * Device change register/unregister. These are not inline or static | |
| * as we export them to the world. | |
| */ | |
| /** | |
| * register_netdevice_notifier - register a network notifier block | |
| * @nb: notifier | |
| * | |
| * Register a notifier to be called when network device events occur. | |
| * The notifier passed is linked into the kernel structures and must | |
| * not be reused until it has been unregistered. A negative errno code | |
| * is returned on a failure. | |
| * | |
| * When registered all registration and up events are replayed | |
| * to the new notifier to allow device to have a race free | |
| * view of the network device list. | |
| */ | |
| int register_netdevice_notifier(struct notifier_block *nb) | |
| { | |
| struct net_device *dev; | |
| struct net_device *last; | |
| struct net *net; | |
| int err; | |
| rtnl_lock(); | |
| err = raw_notifier_chain_register(&netdev_chain, nb); | |
| if (err) | |
| goto unlock; | |
| if (dev_boot_phase) | |
| goto unlock; | |
| for_each_net(net) { | |
| for_each_netdev(net, dev) { | |
| err = nb->notifier_call(nb, NETDEV_REGISTER, dev); | |
| err = notifier_to_errno(err); | |
| if (err) | |
| goto rollback; | |
| if (!(dev->flags & IFF_UP)) | |
| continue; | |
| nb->notifier_call(nb, NETDEV_UP, dev); | |
| } | |
| } | |
| unlock: | |
| rtnl_unlock(); | |
| return err; | |
| rollback: | |
| last = dev; | |
| for_each_net(net) { | |
| for_each_netdev(net, dev) { | |
| if (dev == last) | |
| break; | |
| if (dev->flags & IFF_UP) { | |
| nb->notifier_call(nb, NETDEV_GOING_DOWN, dev); | |
| nb->notifier_call(nb, NETDEV_DOWN, dev); | |
| } | |
| nb->notifier_call(nb, NETDEV_UNREGISTER, dev); | |
| } | |
| } | |
| goto unlock; | |
| } | |
| /** | |
| * unregister_netdevice_notifier - unregister a network notifier block | |
| * @nb: notifier | |
| * | |
| * Unregister a notifier previously registered by | |
| * register_netdevice_notifier(). The notifier is unlinked into the | |
| * kernel structures and may then be reused. A negative errno code | |
| * is returned on a failure. | |
| */ | |
| int unregister_netdevice_notifier(struct notifier_block *nb) | |
| { | |
| int err; | |
| rtnl_lock(); | |
| err = raw_notifier_chain_unregister(&netdev_chain, nb); | |
| rtnl_unlock(); | |
| return err; | |
| } | |
| /** | |
| * call_netdevice_notifiers - call all network notifier blocks | |
| * @val: value passed unmodified to notifier function | |
| * @v: pointer passed unmodified to notifier function | |
| * | |
| * Call all network notifier blocks. Parameters and return value | |
| * are as for raw_notifier_call_chain(). | |
| */ | |
| int call_netdevice_notifiers(unsigned long val, struct net_device *dev) | |
| { | |
| return raw_notifier_call_chain(&netdev_chain, val, dev); | |
| } | |
| /* When > 0 there are consumers of rx skb time stamps */ | |
| static atomic_t netstamp_needed = ATOMIC_INIT(0); | |
| void net_enable_timestamp(void) | |
| { | |
| atomic_inc(&netstamp_needed); | |
| } | |
| void net_disable_timestamp(void) | |
| { | |
| atomic_dec(&netstamp_needed); | |
| } | |
| static inline void net_timestamp(struct sk_buff *skb) | |
| { | |
| if (atomic_read(&netstamp_needed)) | |
| __net_timestamp(skb); | |
| else | |
| skb->tstamp.tv64 = 0; | |
| } | |
| /* | |
| * Support routine. Sends outgoing frames to any network | |
| * taps currently in use. | |
| */ | |
| static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct packet_type *ptype; | |
| net_timestamp(skb); | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(ptype, &ptype_all, list) { | |
| /* Never send packets back to the socket | |
| * they originated from - MvS (miquels@drinkel.ow.org) | |
| */ | |
| if ((ptype->dev == dev || !ptype->dev) && | |
| (ptype->af_packet_priv == NULL || | |
| (struct sock *)ptype->af_packet_priv != skb->sk)) { | |
| struct sk_buff *skb2= skb_clone(skb, GFP_ATOMIC); | |
| if (!skb2) | |
| break; | |
| /* skb->nh should be correctly | |
| set by sender, so that the second statement is | |
| just protection against buggy protocols. | |
| */ | |
| skb_reset_mac_header(skb2); | |
| if (skb_network_header(skb2) < skb2->data || | |
| skb2->network_header > skb2->tail) { | |
| if (net_ratelimit()) | |
| printk(KERN_CRIT "protocol %04x is " | |
| "buggy, dev %s\n", | |
| skb2->protocol, dev->name); | |
| skb_reset_network_header(skb2); | |
| } | |
| skb2->transport_header = skb2->network_header; | |
| skb2->pkt_type = PACKET_OUTGOING; | |
| ptype->func(skb2, skb->dev, ptype, skb->dev); | |
| } | |
| } | |
| rcu_read_unlock(); | |
| } | |
| void __netif_schedule(struct net_device *dev) | |
| { | |
| if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { | |
| unsigned long flags; | |
| struct softnet_data *sd; | |
| local_irq_save(flags); | |
| sd = &__get_cpu_var(softnet_data); | |
| dev->next_sched = sd->output_queue; | |
| sd->output_queue = dev; | |
| raise_softirq_irqoff(NET_TX_SOFTIRQ); | |
| local_irq_restore(flags); | |
| } | |
| } | |
| EXPORT_SYMBOL(__netif_schedule); | |
| void dev_kfree_skb_irq(struct sk_buff *skb) | |
| { | |
| if (atomic_dec_and_test(&skb->users)) { | |
| struct softnet_data *sd; | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| sd = &__get_cpu_var(softnet_data); | |
| skb->next = sd->completion_queue; | |
| sd->completion_queue = skb; | |
| raise_softirq_irqoff(NET_TX_SOFTIRQ); | |
| local_irq_restore(flags); | |
| } | |
| } | |
| EXPORT_SYMBOL(dev_kfree_skb_irq); | |
| void dev_kfree_skb_any(struct sk_buff *skb) | |
| { | |
| if (in_irq() || irqs_disabled()) | |
| dev_kfree_skb_irq(skb); | |
| else | |
| dev_kfree_skb(skb); | |
| } | |
| EXPORT_SYMBOL(dev_kfree_skb_any); | |
| /** | |
| * netif_device_detach - mark device as removed | |
| * @dev: network device | |
| * | |
| * Mark device as removed from system and therefore no longer available. | |
| */ | |
| void netif_device_detach(struct net_device *dev) | |
| { | |
| if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) && | |
| netif_running(dev)) { | |
| netif_stop_queue(dev); | |
| } | |
| } | |
| EXPORT_SYMBOL(netif_device_detach); | |
| /** | |
| * netif_device_attach - mark device as attached | |
| * @dev: network device | |
| * | |
| * Mark device as attached from system and restart if needed. | |
| */ | |
| void netif_device_attach(struct net_device *dev) | |
| { | |
| if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) && | |
| netif_running(dev)) { | |
| netif_wake_queue(dev); | |
| __netdev_watchdog_up(dev); | |
| } | |
| } | |
| EXPORT_SYMBOL(netif_device_attach); | |
| /* | |
| * Invalidate hardware checksum when packet is to be mangled, and | |
| * complete checksum manually on outgoing path. | |
| */ | |
| int skb_checksum_help(struct sk_buff *skb) | |
| { | |
| __wsum csum; | |
| int ret = 0, offset; | |
| if (skb->ip_summed == CHECKSUM_COMPLETE) | |
| goto out_set_summed; | |
| if (unlikely(skb_shinfo(skb)->gso_size)) { | |
| /* Let GSO fix up the checksum. */ | |
| goto out_set_summed; | |
| } | |
| if (skb_cloned(skb)) { | |
| ret = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); | |
| if (ret) | |
| goto out; | |
| } | |
| offset = skb->csum_start - skb_headroom(skb); | |
| BUG_ON(offset > (int)skb->len); | |
| csum = skb_checksum(skb, offset, skb->len-offset, 0); | |
| offset = skb_headlen(skb) - offset; | |
| BUG_ON(offset <= 0); | |
| BUG_ON(skb->csum_offset + 2 > offset); | |
| *(__sum16 *)(skb->head + skb->csum_start + skb->csum_offset) = | |
| csum_fold(csum); | |
| out_set_summed: | |
| skb->ip_summed = CHECKSUM_NONE; | |
| out: | |
| return ret; | |
| } | |
| /** | |
| * skb_gso_segment - Perform segmentation on skb. | |
| * @skb: buffer to segment | |
| * @features: features for the output path (see dev->features) | |
| * | |
| * This function segments the given skb and returns a list of segments. | |
| * | |
| * It may return NULL if the skb requires no segmentation. This is | |
| * only possible when GSO is used for verifying header integrity. | |
| */ | |
| struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features) | |
| { | |
| struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT); | |
| struct packet_type *ptype; | |
| __be16 type = skb->protocol; | |
| int err; | |
| BUG_ON(skb_shinfo(skb)->frag_list); | |
| skb_reset_mac_header(skb); | |
| skb->mac_len = skb->network_header - skb->mac_header; | |
| __skb_pull(skb, skb->mac_len); | |
| if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) { | |
| if (skb_header_cloned(skb) && | |
| (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) | |
| return ERR_PTR(err); | |
| } | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & 15], list) { | |
| if (ptype->type == type && !ptype->dev && ptype->gso_segment) { | |
| if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { | |
| err = ptype->gso_send_check(skb); | |
| segs = ERR_PTR(err); | |
| if (err || skb_gso_ok(skb, features)) | |
| break; | |
| __skb_push(skb, (skb->data - | |
| skb_network_header(skb))); | |
| } | |
| segs = ptype->gso_segment(skb, features); | |
| break; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| __skb_push(skb, skb->data - skb_mac_header(skb)); | |
| return segs; | |
| } | |
| EXPORT_SYMBOL(skb_gso_segment); | |
| /* Take action when hardware reception checksum errors are detected. */ | |
| #ifdef CONFIG_BUG | |
| void netdev_rx_csum_fault(struct net_device *dev) | |
| { | |
| if (net_ratelimit()) { | |
| printk(KERN_ERR "%s: hw csum failure.\n", | |
| dev ? dev->name : "<unknown>"); | |
| dump_stack(); | |
| } | |
| } | |
| EXPORT_SYMBOL(netdev_rx_csum_fault); | |
| #endif | |
| /* Actually, we should eliminate this check as soon as we know, that: | |
| * 1. IOMMU is present and allows to map all the memory. | |
| * 2. No high memory really exists on this machine. | |
| */ | |
| static inline int illegal_highdma(struct net_device *dev, struct sk_buff *skb) | |
| { | |
| #ifdef CONFIG_HIGHMEM | |
| int i; | |
| if (dev->features & NETIF_F_HIGHDMA) | |
| return 0; | |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
| if (PageHighMem(skb_shinfo(skb)->frags[i].page)) | |
| return 1; | |
| #endif | |
| return 0; | |
| } | |
| struct dev_gso_cb { | |
| void (*destructor)(struct sk_buff *skb); | |
| }; | |
| #define DEV_GSO_CB(skb) ((struct dev_gso_cb *)(skb)->cb) | |
| static void dev_gso_skb_destructor(struct sk_buff *skb) | |
| { | |
| struct dev_gso_cb *cb; | |
| do { | |
| struct sk_buff *nskb = skb->next; | |
| skb->next = nskb->next; | |
| nskb->next = NULL; | |
| kfree_skb(nskb); | |
| } while (skb->next); | |
| cb = DEV_GSO_CB(skb); | |
| if (cb->destructor) | |
| cb->destructor(skb); | |
| } | |
| /** | |
| * dev_gso_segment - Perform emulated hardware segmentation on skb. | |
| * @skb: buffer to segment | |
| * | |
| * This function segments the given skb and stores the list of segments | |
| * in skb->next. | |
| */ | |
| static int dev_gso_segment(struct sk_buff *skb) | |
| { | |
| struct net_device *dev = skb->dev; | |
| struct sk_buff *segs; | |
| int features = dev->features & ~(illegal_highdma(dev, skb) ? | |
| NETIF_F_SG : 0); | |
| segs = skb_gso_segment(skb, features); | |
| /* Verifying header integrity only. */ | |
| if (!segs) | |
| return 0; | |
| if (unlikely(IS_ERR(segs))) | |
| return PTR_ERR(segs); | |
| skb->next = segs; | |
| DEV_GSO_CB(skb)->destructor = skb->destructor; | |
| skb->destructor = dev_gso_skb_destructor; | |
| return 0; | |
| } | |
| int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| if (likely(!skb->next)) { | |
| if (!list_empty(&ptype_all)) | |
| dev_queue_xmit_nit(skb, dev); | |
| if (netif_needs_gso(dev, skb)) { | |
| if (unlikely(dev_gso_segment(skb))) | |
| goto out_kfree_skb; | |
| if (skb->next) | |
| goto gso; | |
| } | |
| return dev->hard_start_xmit(skb, dev); | |
| } | |
| gso: | |
| do { | |
| struct sk_buff *nskb = skb->next; | |
| int rc; | |
| skb->next = nskb->next; | |
| nskb->next = NULL; | |
| rc = dev->hard_start_xmit(nskb, dev); | |
| if (unlikely(rc)) { | |
| nskb->next = skb->next; | |
| skb->next = nskb; | |
| return rc; | |
| } | |
| if (unlikely((netif_queue_stopped(dev) || | |
| netif_subqueue_stopped(dev, skb->queue_mapping)) && | |
| skb->next)) | |
| return NETDEV_TX_BUSY; | |
| } while (skb->next); | |
| skb->destructor = DEV_GSO_CB(skb)->destructor; | |
| out_kfree_skb: | |
| kfree_skb(skb); | |
| return 0; | |
| } | |
| /** | |
| * dev_queue_xmit - transmit a buffer | |
| * @skb: buffer to transmit | |
| * | |
| * Queue a buffer for transmission to a network device. The caller must | |
| * have set the device and priority and built the buffer before calling | |
| * this function. The function can be called from an interrupt. | |
| * | |
| * A negative errno code is returned on a failure. A success does not | |
| * guarantee the frame will be transmitted as it may be dropped due | |
| * to congestion or traffic shaping. | |
| * | |
| * ----------------------------------------------------------------------------------- | |
| * I notice this method can also return errors from the queue disciplines, | |
| * including NET_XMIT_DROP, which is a positive value. So, errors can also | |
| * be positive. | |
| * | |
| * Regardless of the return value, the skb is consumed, so it is currently | |
| * difficult to retry a send to this method. (You can bump the ref count | |
| * before sending to hold a reference for retry if you are careful.) | |
| * | |
| * When calling this method, interrupts MUST be enabled. This is because | |
| * the BH enable code must have IRQs enabled so that it will not deadlock. | |
| * --BLG | |
| */ | |
| int dev_queue_xmit(struct sk_buff *skb) | |
| { | |
| struct net_device *dev = skb->dev; | |
| struct Qdisc *q; | |
| int rc = -ENOMEM; | |
| /* GSO will handle the following emulations directly. */ | |
| if (netif_needs_gso(dev, skb)) | |
| goto gso; | |
| if (skb_shinfo(skb)->frag_list && | |
| !(dev->features & NETIF_F_FRAGLIST) && | |
| __skb_linearize(skb)) | |
| goto out_kfree_skb; | |
| /* Fragmented skb is linearized if device does not support SG, | |
| * or if at least one of fragments is in highmem and device | |
| * does not support DMA from it. | |
| */ | |
| if (skb_shinfo(skb)->nr_frags && | |
| (!(dev->features & NETIF_F_SG) || illegal_highdma(dev, skb)) && | |
| __skb_linearize(skb)) | |
| goto out_kfree_skb; | |
| /* If packet is not checksummed and device does not support | |
| * checksumming for this protocol, complete checksumming here. | |
| */ | |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
| skb_set_transport_header(skb, skb->csum_start - | |
| skb_headroom(skb)); | |
| if (!(dev->features & NETIF_F_GEN_CSUM) && | |
| !((dev->features & NETIF_F_IP_CSUM) && | |
| skb->protocol == htons(ETH_P_IP)) && | |
| !((dev->features & NETIF_F_IPV6_CSUM) && | |
| skb->protocol == htons(ETH_P_IPV6))) | |
| if (skb_checksum_help(skb)) | |
| goto out_kfree_skb; | |
| } | |
| gso: | |
| spin_lock_prefetch(&dev->queue_lock); | |
| /* Disable soft irqs for various locks below. Also | |
| * stops preemption for RCU. | |
| */ | |
| rcu_read_lock_bh(); | |
| /* Updates of qdisc are serialized by queue_lock. | |
| * The struct Qdisc which is pointed to by qdisc is now a | |
| * rcu structure - it may be accessed without acquiring | |
| * a lock (but the structure may be stale.) The freeing of the | |
| * qdisc will be deferred until it's known that there are no | |
| * more references to it. | |
| * | |
| * If the qdisc has an enqueue function, we still need to | |
| * hold the queue_lock before calling it, since queue_lock | |
| * also serializes access to the device queue. | |
| */ | |
| q = rcu_dereference(dev->qdisc); | |
| #ifdef CONFIG_NET_CLS_ACT | |
| skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_EGRESS); | |
| #endif | |
| if (q->enqueue) { | |
| /* Grab device queue */ | |
| spin_lock(&dev->queue_lock); | |
| q = dev->qdisc; | |
| if (q->enqueue) { | |
| /* reset queue_mapping to zero */ | |
| skb->queue_mapping = 0; | |
| rc = q->enqueue(skb, q); | |
| qdisc_run(dev); | |
| spin_unlock(&dev->queue_lock); | |
| rc = rc == NET_XMIT_BYPASS ? NET_XMIT_SUCCESS : rc; | |
| goto out; | |
| } | |
| spin_unlock(&dev->queue_lock); | |
| } | |
| /* The device has no queue. Common case for software devices: | |
| loopback, all the sorts of tunnels... | |
| Really, it is unlikely that netif_tx_lock protection is necessary | |
| here. (f.e. loopback and IP tunnels are clean ignoring statistics | |
| counters.) | |
| However, it is possible, that they rely on protection | |
| made by us here. | |
| Check this and shot the lock. It is not prone from deadlocks. | |
| Either shot noqueue qdisc, it is even simpler 8) | |
| */ | |
| if (dev->flags & IFF_UP) { | |
| int cpu = smp_processor_id(); /* ok because BHs are off */ | |
| if (dev->xmit_lock_owner != cpu) { | |
| HARD_TX_LOCK(dev, cpu); | |
| if (!netif_queue_stopped(dev) && | |
| !netif_subqueue_stopped(dev, skb->queue_mapping)) { | |
| rc = 0; | |
| if (!dev_hard_start_xmit(skb, dev)) { | |
| HARD_TX_UNLOCK(dev); | |
| goto out; | |
| } | |
| } | |
| HARD_TX_UNLOCK(dev); | |
| if (net_ratelimit()) | |
| printk(KERN_CRIT "Virtual device %s asks to " | |
| "queue packet!\n", dev->name); | |
| } else { | |
| /* Recursion is detected! It is possible, | |
| * unfortunately */ | |
| if (net_ratelimit()) | |
| printk(KERN_CRIT "Dead loop on virtual device " | |
| "%s, fix it urgently!\n", dev->name); | |
| } | |
| } | |
| rc = -ENETDOWN; | |
| rcu_read_unlock_bh(); | |
| out_kfree_skb: | |
| kfree_skb(skb); | |
| return rc; | |
| out: | |
| rcu_read_unlock_bh(); | |
| return rc; | |
| } | |
| /*======================================================================= | |
| Receiver routines | |
| =======================================================================*/ | |
| int netdev_max_backlog __read_mostly = 1000; | |
| int netdev_budget __read_mostly = 300; | |
| int weight_p __read_mostly = 64; /* old backlog weight */ | |
| DEFINE_PER_CPU(struct netif_rx_stats, netdev_rx_stat) = { 0, }; | |
| /** | |
| * netif_rx - post buffer to the network code | |
| * @skb: buffer to post | |
| * | |
| * This function receives a packet from a device driver and queues it for | |
| * the upper (protocol) levels to process. It always succeeds. The buffer | |
| * may be dropped during processing for congestion control or by the | |
| * protocol layers. | |
| * | |
| * return values: | |
| * NET_RX_SUCCESS (no congestion) | |
| * NET_RX_CN_LOW (low congestion) | |
| * NET_RX_CN_MOD (moderate congestion) | |
| * NET_RX_CN_HIGH (high congestion) | |
| * NET_RX_DROP (packet was dropped) | |
| * | |
| */ | |
| int netif_rx(struct sk_buff *skb) | |
| { | |
| struct softnet_data *queue; | |
| unsigned long flags; | |
| /* if netpoll wants it, pretend we never saw it */ | |
| if (netpoll_rx(skb)) | |
| return NET_RX_DROP; | |
| if (!skb->tstamp.tv64) | |
| net_timestamp(skb); | |
| /* | |
| * The code is rearranged so that the path is the most | |
| * short when CPU is congested, but is still operating. | |
| */ | |
| local_irq_save(flags); | |
| queue = &__get_cpu_var(softnet_data); | |
| __get_cpu_var(netdev_rx_stat).total++; | |
| if (queue->input_pkt_queue.qlen <= netdev_max_backlog) { | |
| if (queue->input_pkt_queue.qlen) { | |
| enqueue: | |
| dev_hold(skb->dev); | |
| __skb_queue_tail(&queue->input_pkt_queue, skb); | |
| local_irq_restore(flags); | |
| return NET_RX_SUCCESS; | |
| } | |
| napi_schedule(&queue->backlog); | |
| goto enqueue; | |
| } | |
| __get_cpu_var(netdev_rx_stat).dropped++; | |
| local_irq_restore(flags); | |
| kfree_skb(skb); | |
| return NET_RX_DROP; | |
| } | |
| int netif_rx_ni(struct sk_buff *skb) | |
| { | |
| int err; | |
| preempt_disable(); | |
| err = netif_rx(skb); | |
| if (local_softirq_pending()) | |
| do_softirq(); | |
| preempt_enable(); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(netif_rx_ni); | |
| static inline struct net_device *skb_bond(struct sk_buff *skb) | |
| { | |
| struct net_device *dev = skb->dev; | |
| if (dev->master) { | |
| if (skb_bond_should_drop(skb)) { | |
| kfree_skb(skb); | |
| return NULL; | |
| } | |
| skb->dev = dev->master; | |
| } | |
| return dev; | |
| } | |
| static void net_tx_action(struct softirq_action *h) | |
| { | |
| struct softnet_data *sd = &__get_cpu_var(softnet_data); | |
| if (sd->completion_queue) { | |
| struct sk_buff *clist; | |
| local_irq_disable(); | |
| clist = sd->completion_queue; | |
| sd->completion_queue = NULL; | |
| local_irq_enable(); | |
| while (clist) { | |
| struct sk_buff *skb = clist; | |
| clist = clist->next; | |
| BUG_TRAP(!atomic_read(&skb->users)); | |
| __kfree_skb(skb); | |
| } | |
| } | |
| if (sd->output_queue) { | |
| struct net_device *head; | |
| local_irq_disable(); | |
| head = sd->output_queue; | |
| sd->output_queue = NULL; | |
| local_irq_enable(); | |
| while (head) { | |
| struct net_device *dev = head; | |
| head = head->next_sched; | |
| smp_mb__before_clear_bit(); | |
| clear_bit(__LINK_STATE_SCHED, &dev->state); | |
| if (spin_trylock(&dev->queue_lock)) { | |
| qdisc_run(dev); | |
| spin_unlock(&dev->queue_lock); | |
| } else { | |
| netif_schedule(dev); | |
| } | |
| } | |
| } | |
| } | |
| static inline int deliver_skb(struct sk_buff *skb, | |
| struct packet_type *pt_prev, | |
| struct net_device *orig_dev) | |
| { | |
| atomic_inc(&skb->users); | |
| return pt_prev->func(skb, skb->dev, pt_prev, orig_dev); | |
| } | |
| #if defined(CONFIG_BRIDGE) || defined (CONFIG_BRIDGE_MODULE) | |
| /* These hooks defined here for ATM */ | |
| struct net_bridge; | |
| struct net_bridge_fdb_entry *(*br_fdb_get_hook)(struct net_bridge *br, | |
| unsigned char *addr); | |
| void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent) __read_mostly; | |
| /* | |
| * If bridge module is loaded call bridging hook. | |
| * returns NULL if packet was consumed. | |
| */ | |
| struct sk_buff *(*br_handle_frame_hook)(struct net_bridge_port *p, | |
| struct sk_buff *skb) __read_mostly; | |
| static inline struct sk_buff *handle_bridge(struct sk_buff *skb, | |
| struct packet_type **pt_prev, int *ret, | |
| struct net_device *orig_dev) | |
| { | |
| struct net_bridge_port *port; | |
| if (skb->pkt_type == PACKET_LOOPBACK || | |
| (port = rcu_dereference(skb->dev->br_port)) == NULL) | |
| return skb; | |
| if (*pt_prev) { | |
| *ret = deliver_skb(skb, *pt_prev, orig_dev); | |
| *pt_prev = NULL; | |
| } | |
| return br_handle_frame_hook(port, skb); | |
| } | |
| #else | |
| #define handle_bridge(skb, pt_prev, ret, orig_dev) (skb) | |
| #endif | |
| #if defined(CONFIG_MACVLAN) || defined(CONFIG_MACVLAN_MODULE) | |
| struct sk_buff *(*macvlan_handle_frame_hook)(struct sk_buff *skb) __read_mostly; | |
| EXPORT_SYMBOL_GPL(macvlan_handle_frame_hook); | |
| static inline struct sk_buff *handle_macvlan(struct sk_buff *skb, | |
| struct packet_type **pt_prev, | |
| int *ret, | |
| struct net_device *orig_dev) | |
| { | |
| if (skb->dev->macvlan_port == NULL) | |
| return skb; | |
| if (*pt_prev) { | |
| *ret = deliver_skb(skb, *pt_prev, orig_dev); | |
| *pt_prev = NULL; | |
| } | |
| return macvlan_handle_frame_hook(skb); | |
| } | |
| #else | |
| #define handle_macvlan(skb, pt_prev, ret, orig_dev) (skb) | |
| #endif | |
| #ifdef CONFIG_NET_CLS_ACT | |
| /* TODO: Maybe we should just force sch_ingress to be compiled in | |
| * when CONFIG_NET_CLS_ACT is? otherwise some useless instructions | |
| * a compare and 2 stores extra right now if we dont have it on | |
| * but have CONFIG_NET_CLS_ACT | |
| * NOTE: This doesnt stop any functionality; if you dont have | |
| * the ingress scheduler, you just cant add policies on ingress. | |
| * | |
| */ | |
| static int ing_filter(struct sk_buff *skb) | |
| { | |
| struct Qdisc *q; | |
| struct net_device *dev = skb->dev; | |
| int result = TC_ACT_OK; | |
| if (dev->qdisc_ingress) { | |
| __u32 ttl = (__u32) G_TC_RTTL(skb->tc_verd); | |
| if (MAX_RED_LOOP < ttl++) { | |
| printk(KERN_WARNING "Redir loop detected Dropping packet (%d->%d)\n", | |
| skb->iif, skb->dev->ifindex); | |
| return TC_ACT_SHOT; | |
| } | |
| skb->tc_verd = SET_TC_RTTL(skb->tc_verd,ttl); | |
| skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_INGRESS); | |
| spin_lock(&dev->ingress_lock); | |
| if ((q = dev->qdisc_ingress) != NULL) | |
| result = q->enqueue(skb, q); | |
| spin_unlock(&dev->ingress_lock); | |
| } | |
| return result; | |
| } | |
| #endif | |
| int netif_receive_skb(struct sk_buff *skb) | |
| { | |
| struct packet_type *ptype, *pt_prev; | |
| struct net_device *orig_dev; | |
| int ret = NET_RX_DROP; | |
| __be16 type; | |
| /* if we've gotten here through NAPI, check netpoll */ | |
| if (netpoll_receive_skb(skb)) | |
| return NET_RX_DROP; | |
| if (!skb->tstamp.tv64) | |
| net_timestamp(skb); | |
| if (!skb->iif) | |
| skb->iif = skb->dev->ifindex; | |
| orig_dev = skb_bond(skb); | |
| if (!orig_dev) | |
| return NET_RX_DROP; | |
| __get_cpu_var(netdev_rx_stat).total++; | |
| skb_reset_network_header(skb); | |
| skb_reset_transport_header(skb); | |
| skb->mac_len = skb->network_header - skb->mac_header; | |
| pt_prev = NULL; | |
| rcu_read_lock(); | |
| #ifdef CONFIG_NET_CLS_ACT | |
| if (skb->tc_verd & TC_NCLS) { | |
| skb->tc_verd = CLR_TC_NCLS(skb->tc_verd); | |
| goto ncls; | |
| } | |
| #endif | |
| list_for_each_entry_rcu(ptype, &ptype_all, list) { | |
| if (!ptype->dev || ptype->dev == skb->dev) { | |
| if (pt_prev) | |
| ret = deliver_skb(skb, pt_prev, orig_dev); | |
| pt_prev = ptype; | |
| } | |
| } | |
| #ifdef CONFIG_NET_CLS_ACT | |
| if (pt_prev) { | |
| ret = deliver_skb(skb, pt_prev, orig_dev); | |
| pt_prev = NULL; /* noone else should process this after*/ | |
| } else { | |
| skb->tc_verd = SET_TC_OK2MUNGE(skb->tc_verd); | |
| } | |
| ret = ing_filter(skb); | |
| if (ret == TC_ACT_SHOT || (ret == TC_ACT_STOLEN)) { | |
| kfree_skb(skb); | |
| goto out; | |
| } | |
| skb->tc_verd = 0; | |
| ncls: | |
| #endif | |
| skb = handle_bridge(skb, &pt_prev, &ret, orig_dev); | |
| if (!skb) | |
| goto out; | |
| skb = handle_macvlan(skb, &pt_prev, &ret, orig_dev); | |
| if (!skb) | |
| goto out; | |
| type = skb->protocol; | |
| list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type)&15], list) { | |
| if (ptype->type == type && | |
| (!ptype->dev || ptype->dev == skb->dev)) { | |
| if (pt_prev) | |
| ret = deliver_skb(skb, pt_prev, orig_dev); | |
| pt_prev = ptype; | |
| } | |
| } | |
| if (pt_prev) { | |
| ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev); | |
| } else { | |
| kfree_skb(skb); | |
| /* Jamal, now you will not able to escape explaining | |
| * me how you were going to use this. :-) | |
| */ | |
| ret = NET_RX_DROP; | |
| } | |
| out: | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| static int process_backlog(struct napi_struct *napi, int quota) | |
| { | |
| int work = 0; | |
| struct softnet_data *queue = &__get_cpu_var(softnet_data); | |
| unsigned long start_time = jiffies; | |
| napi->weight = weight_p; | |
| do { | |
| struct sk_buff *skb; | |
| struct net_device *dev; | |
| local_irq_disable(); | |
| skb = __skb_dequeue(&queue->input_pkt_queue); | |
| if (!skb) { | |
| __napi_complete(napi); | |
| local_irq_enable(); | |
| break; | |
| } | |
| local_irq_enable(); | |
| dev = skb->dev; | |
| netif_receive_skb(skb); | |
| dev_put(dev); | |
| } while (++work < quota && jiffies == start_time); | |
| return work; | |
| } | |
| /** | |
| * __napi_schedule - schedule for receive | |
| * @napi: entry to schedule | |
| * | |
| * The entry's receive function will be scheduled to run | |
| */ | |
| void fastcall __napi_schedule(struct napi_struct *n) | |
| { | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| list_add_tail(&n->poll_list, &__get_cpu_var(softnet_data).poll_list); | |
| __raise_softirq_irqoff(NET_RX_SOFTIRQ); | |
| local_irq_restore(flags); | |
| } | |
| EXPORT_SYMBOL(__napi_schedule); | |
| static void net_rx_action(struct softirq_action *h) | |
| { | |
| struct list_head *list = &__get_cpu_var(softnet_data).poll_list; | |
| unsigned long start_time = jiffies; | |
| int budget = netdev_budget; | |
| void *have; | |
| local_irq_disable(); | |
| while (!list_empty(list)) { | |
| struct napi_struct *n; | |
| int work, weight; | |
| /* If softirq window is exhuasted then punt. | |
| * | |
| * Note that this is a slight policy change from the | |
| * previous NAPI code, which would allow up to 2 | |
| * jiffies to pass before breaking out. The test | |
| * used to be "jiffies - start_time > 1". | |
| */ | |
| if (unlikely(budget <= 0 || jiffies != start_time)) | |
| goto softnet_break; | |
| local_irq_enable(); | |
| /* Even though interrupts have been re-enabled, this | |
| * access is safe because interrupts can only add new | |
| * entries to the tail of this list, and only ->poll() | |
| * calls can remove this head entry from the list. | |
| */ | |
| n = list_entry(list->next, struct napi_struct, poll_list); | |
| have = netpoll_poll_lock(n); | |
| weight = n->weight; | |
| work = n->poll(n, weight); | |
| WARN_ON_ONCE(work > weight); | |
| budget -= work; | |
| local_irq_disable(); | |
| /* Drivers must not modify the NAPI state if they | |
| * consume the entire weight. In such cases this code | |
| * still "owns" the NAPI instance and therefore can | |
| * move the instance around on the list at-will. | |
| */ | |
| if (unlikely(work == weight)) | |
| list_move_tail(&n->poll_list, list); | |
| netpoll_poll_unlock(have); | |
| } | |
| out: | |
| local_irq_enable(); | |
| #ifdef CONFIG_NET_DMA | |
| /* | |
| * There may not be any more sk_buffs coming right now, so push | |
| * any pending DMA copies to hardware | |
| */ | |
| if (!cpus_empty(net_dma.channel_mask)) { | |
| int chan_idx; | |
| for_each_cpu_mask(chan_idx, net_dma.channel_mask) { | |
| struct dma_chan *chan = net_dma.channels[chan_idx]; | |
| if (chan) | |
| dma_async_memcpy_issue_pending(chan); | |
| } | |
| } | |
| #endif | |
| return; | |
| softnet_break: | |
| __get_cpu_var(netdev_rx_stat).time_squeeze++; | |
| __raise_softirq_irqoff(NET_RX_SOFTIRQ); | |
| goto out; | |
| } | |
| static gifconf_func_t * gifconf_list [NPROTO]; | |
| /** | |
| * register_gifconf - register a SIOCGIF handler | |
| * @family: Address family | |
| * @gifconf: Function handler | |
| * | |
| * Register protocol dependent address dumping routines. The handler | |
| * that is passed must not be freed or reused until it has been replaced | |
| * by another handler. | |
| */ | |
| int register_gifconf(unsigned int family, gifconf_func_t * gifconf) | |
| { | |
| if (family >= NPROTO) | |
| return -EINVAL; | |
| gifconf_list[family] = gifconf; | |
| return 0; | |
| } | |
| /* | |
| * Map an interface index to its name (SIOCGIFNAME) | |
| */ | |
| /* | |
| * We need this ioctl for efficient implementation of the | |
| * if_indextoname() function required by the IPv6 API. Without | |
| * it, we would have to search all the interfaces to find a | |
| * match. --pb | |
| */ | |
| static int dev_ifname(struct net *net, struct ifreq __user *arg) | |
| { | |
| struct net_device *dev; | |
| struct ifreq ifr; | |
| /* | |
| * Fetch the caller's info block. | |
| */ | |
| if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) | |
| return -EFAULT; | |
| read_lock(&dev_base_lock); | |
| dev = __dev_get_by_index(net, ifr.ifr_ifindex); | |
| if (!dev) { | |
| read_unlock(&dev_base_lock); | |
| return -ENODEV; | |
| } | |
| strcpy(ifr.ifr_name, dev->name); | |
| read_unlock(&dev_base_lock); | |
| if (copy_to_user(arg, &ifr, sizeof(struct ifreq))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| /* | |
| * Perform a SIOCGIFCONF call. This structure will change | |
| * size eventually, and there is nothing I can do about it. | |
| * Thus we will need a 'compatibility mode'. | |
| */ | |
| static int dev_ifconf(struct net *net, char __user *arg) | |
| { | |
| struct ifconf ifc; | |
| struct net_device *dev; | |
| char __user *pos; | |
| int len; | |
| int total; | |
| int i; | |
| /* | |
| * Fetch the caller's info block. | |
| */ | |
| if (copy_from_user(&ifc, arg, sizeof(struct ifconf))) | |
| return -EFAULT; | |
| pos = ifc.ifc_buf; | |
| len = ifc.ifc_len; | |
| /* | |
| * Loop over the interfaces, and write an info block for each. | |
| */ | |
| total = 0; | |
| for_each_netdev(net, dev) { | |
| for (i = 0; i < NPROTO; i++) { | |
| if (gifconf_list[i]) { | |
| int done; | |
| if (!pos) | |
| done = gifconf_list[i](dev, NULL, 0); | |
| else | |
| done = gifconf_list[i](dev, pos + total, | |
| len - total); | |
| if (done < 0) | |
| return -EFAULT; | |
| total += done; | |
| } | |
| } | |
| } | |
| /* | |
| * All done. Write the updated control block back to the caller. | |
| */ | |
| ifc.ifc_len = total; | |
| /* | |
| * Both BSD and Solaris return 0 here, so we do too. | |
| */ | |
| return copy_to_user(arg, &ifc, sizeof(struct ifconf)) ? -EFAULT : 0; | |
| } | |
| #ifdef CONFIG_PROC_FS | |
| /* | |
| * This is invoked by the /proc filesystem handler to display a device | |
| * in detail. | |
| */ | |
| void *dev_seq_start(struct seq_file *seq, loff_t *pos) | |
| { | |
| struct net *net = seq->private; | |
| loff_t off; | |
| struct net_device *dev; | |
| read_lock(&dev_base_lock); | |
| if (!*pos) | |
| return SEQ_START_TOKEN; | |
| off = 1; | |
| for_each_netdev(net, dev) | |
| if (off++ == *pos) | |
| return dev; | |
| return NULL; | |
| } | |
| void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) | |
| { | |
| struct net *net = seq->private; | |
| ++*pos; | |
| return v == SEQ_START_TOKEN ? | |
| first_net_device(net) : next_net_device((struct net_device *)v); | |
| } | |
| void dev_seq_stop(struct seq_file *seq, void *v) | |
| { | |
| read_unlock(&dev_base_lock); | |
| } | |
| static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev) | |
| { | |
| struct net_device_stats *stats = dev->get_stats(dev); | |
| seq_printf(seq, "%6s:%8lu %7lu %4lu %4lu %4lu %5lu %10lu %9lu " | |
| "%8lu %7lu %4lu %4lu %4lu %5lu %7lu %10lu\n", | |
| dev->name, stats->rx_bytes, stats->rx_packets, | |
| stats->rx_errors, | |
| stats->rx_dropped + stats->rx_missed_errors, | |
| stats->rx_fifo_errors, | |
| stats->rx_length_errors + stats->rx_over_errors + | |
| stats->rx_crc_errors + stats->rx_frame_errors, | |
| stats->rx_compressed, stats->multicast, | |
| stats->tx_bytes, stats->tx_packets, | |
| stats->tx_errors, stats->tx_dropped, | |
| stats->tx_fifo_errors, stats->collisions, | |
| stats->tx_carrier_errors + | |
| stats->tx_aborted_errors + | |
| stats->tx_window_errors + | |
| stats->tx_heartbeat_errors, | |
| stats->tx_compressed); | |
| } | |
| /* | |
| * Called from the PROCfs module. This now uses the new arbitrary sized | |
| * /proc/net interface to create /proc/net/dev | |
| */ | |
| static int dev_seq_show(struct seq_file *seq, void *v) | |
| { | |
| if (v == SEQ_START_TOKEN) | |
| seq_puts(seq, "Inter-| Receive " | |
| " | Transmit\n" | |
| " face |bytes packets errs drop fifo frame " | |
| "compressed multicast|bytes packets errs " | |
| "drop fifo colls carrier compressed\n"); | |
| else | |
| dev_seq_printf_stats(seq, v); | |
| return 0; | |
| } | |
| static struct netif_rx_stats *softnet_get_online(loff_t *pos) | |
| { | |
| struct netif_rx_stats *rc = NULL; | |
| while (*pos < NR_CPUS) | |
| if (cpu_online(*pos)) { | |
| rc = &per_cpu(netdev_rx_stat, *pos); | |
| break; | |
| } else | |
| ++*pos; | |
| return rc; | |
| } | |
| static void *softnet_seq_start(struct seq_file *seq, loff_t *pos) | |
| { | |
| return softnet_get_online(pos); | |
| } | |
| static void *softnet_seq_next(struct seq_file *seq, void *v, loff_t *pos) | |
| { | |
| ++*pos; | |
| return softnet_get_online(pos); | |
| } | |
| static void softnet_seq_stop(struct seq_file *seq, void *v) | |
| { | |
| } | |
| static int softnet_seq_show(struct seq_file *seq, void *v) | |
| { | |
| struct netif_rx_stats *s = v; | |
| seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x\n", | |
| s->total, s->dropped, s->time_squeeze, 0, | |
| 0, 0, 0, 0, /* was fastroute */ | |
| s->cpu_collision ); | |
| return 0; | |
| } | |
| static const struct seq_operations dev_seq_ops = { | |
| .start = dev_seq_start, | |
| .next = dev_seq_next, | |
| .stop = dev_seq_stop, | |
| .show = dev_seq_show, | |
| }; | |
| static int dev_seq_open(struct inode *inode, struct file *file) | |
| { | |
| struct seq_file *seq; | |
| int res; | |
| res = seq_open(file, &dev_seq_ops); | |
| if (!res) { | |
| seq = file->private_data; | |
| seq->private = get_proc_net(inode); | |
| if (!seq->private) { | |
| seq_release(inode, file); | |
| res = -ENXIO; | |
| } | |
| } | |
| return res; | |
| } | |
| static int dev_seq_release(struct inode *inode, struct file *file) | |
| { | |
| struct seq_file *seq = file->private_data; | |
| struct net *net = seq->private; | |
| put_net(net); | |
| return seq_release(inode, file); | |
| } | |
| static const struct file_operations dev_seq_fops = { | |
| .owner = THIS_MODULE, | |
| .open = dev_seq_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = dev_seq_release, | |
| }; | |
| static const struct seq_operations softnet_seq_ops = { | |
| .start = softnet_seq_start, | |
| .next = softnet_seq_next, | |
| .stop = softnet_seq_stop, | |
| .show = softnet_seq_show, | |
| }; | |
| static int softnet_seq_open(struct inode *inode, struct file *file) | |
| { | |
| return seq_open(file, &softnet_seq_ops); | |
| } | |
| static const struct file_operations softnet_seq_fops = { | |
| .owner = THIS_MODULE, | |
| .open = softnet_seq_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = seq_release, | |
| }; | |
| static void *ptype_get_idx(loff_t pos) | |
| { | |
| struct packet_type *pt = NULL; | |
| loff_t i = 0; | |
| int t; | |
| list_for_each_entry_rcu(pt, &ptype_all, list) { | |
| if (i == pos) | |
| return pt; | |
| ++i; | |
| } | |
| for (t = 0; t < 16; t++) { | |
| list_for_each_entry_rcu(pt, &ptype_base[t], list) { | |
| if (i == pos) | |
| return pt; | |
| ++i; | |
| } | |
| } | |
| return NULL; | |
| } | |
| static void *ptype_seq_start(struct seq_file *seq, loff_t *pos) | |
| { | |
| rcu_read_lock(); | |
| return *pos ? ptype_get_idx(*pos - 1) : SEQ_START_TOKEN; | |
| } | |
| static void *ptype_seq_next(struct seq_file *seq, void *v, loff_t *pos) | |
| { | |
| struct packet_type *pt; | |
| struct list_head *nxt; | |
| int hash; | |
| ++*pos; | |
| if (v == SEQ_START_TOKEN) | |
| return ptype_get_idx(0); | |
| pt = v; | |
| nxt = pt->list.next; | |
| if (pt->type == htons(ETH_P_ALL)) { | |
| if (nxt != &ptype_all) | |
| goto found; | |
| hash = 0; | |
| nxt = ptype_base[0].next; | |
| } else | |
| hash = ntohs(pt->type) & 15; | |
| while (nxt == &ptype_base[hash]) { | |
| if (++hash >= 16) | |
| return NULL; | |
| nxt = ptype_base[hash].next; | |
| } | |
| found: | |
| return list_entry(nxt, struct packet_type, list); | |
| } | |
| static void ptype_seq_stop(struct seq_file *seq, void *v) | |
| { | |
| rcu_read_unlock(); | |
| } | |
| static void ptype_seq_decode(struct seq_file *seq, void *sym) | |
| { | |
| #ifdef CONFIG_KALLSYMS | |
| unsigned long offset = 0, symsize; | |
| const char *symname; | |
| char *modname; | |
| char namebuf[128]; | |
| symname = kallsyms_lookup((unsigned long)sym, &symsize, &offset, | |
| &modname, namebuf); | |
| if (symname) { | |
| char *delim = ":"; | |
| if (!modname) | |
| modname = delim = ""; | |
| seq_printf(seq, "%s%s%s%s+0x%lx", delim, modname, delim, | |
| symname, offset); | |
| return; | |
| } | |
| #endif | |
| seq_printf(seq, "[%p]", sym); | |
| } | |
| static int ptype_seq_show(struct seq_file *seq, void *v) | |
| { | |
| struct packet_type *pt = v; | |
| if (v == SEQ_START_TOKEN) | |
| seq_puts(seq, "Type Device Function\n"); | |
| else { | |
| if (pt->type == htons(ETH_P_ALL)) | |
| seq_puts(seq, "ALL "); | |
| else | |
| seq_printf(seq, "%04x", ntohs(pt->type)); | |
| seq_printf(seq, " %-8s ", | |
| pt->dev ? pt->dev->name : ""); | |
| ptype_seq_decode(seq, pt->func); | |
| seq_putc(seq, '\n'); | |
| } | |
| return 0; | |
| } | |
| static const struct seq_operations ptype_seq_ops = { | |
| .start = ptype_seq_start, | |
| .next = ptype_seq_next, | |
| .stop = ptype_seq_stop, | |
| .show = ptype_seq_show, | |
| }; | |
| static int ptype_seq_open(struct inode *inode, struct file *file) | |
| { | |
| return seq_open(file, &ptype_seq_ops); | |
| } | |
| static const struct file_operations ptype_seq_fops = { | |
| .owner = THIS_MODULE, | |
| .open = ptype_seq_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = seq_release, | |
| }; | |
| static int __net_init dev_proc_net_init(struct net *net) | |
| { | |
| int rc = -ENOMEM; | |
| if (!proc_net_fops_create(net, "dev", S_IRUGO, &dev_seq_fops)) | |
| goto out; | |
| if (!proc_net_fops_create(net, "softnet_stat", S_IRUGO, &softnet_seq_fops)) | |
| goto out_dev; | |
| if (!proc_net_fops_create(net, "ptype", S_IRUGO, &ptype_seq_fops)) | |
| goto out_softnet; | |
| if (wext_proc_init(net)) | |
| goto out_ptype; | |
| rc = 0; | |
| out: | |
| return rc; | |
| out_ptype: | |
| proc_net_remove(net, "ptype"); | |
| out_softnet: | |
| proc_net_remove(net, "softnet_stat"); | |
| out_dev: | |
| proc_net_remove(net, "dev"); | |
| goto out; | |
| } | |
| static void __net_exit dev_proc_net_exit(struct net *net) | |
| { | |
| wext_proc_exit(net); | |
| proc_net_remove(net, "ptype"); | |
| proc_net_remove(net, "softnet_stat"); | |
| proc_net_remove(net, "dev"); | |
| } | |
| static struct pernet_operations __net_initdata dev_proc_ops = { | |
| .init = dev_proc_net_init, | |
| .exit = dev_proc_net_exit, | |
| }; | |
| static int __init dev_proc_init(void) | |
| { | |
| return register_pernet_subsys(&dev_proc_ops); | |
| } | |
| #else | |
| #define dev_proc_init() 0 | |
| #endif /* CONFIG_PROC_FS */ | |
| /** | |
| * netdev_set_master - set up master/slave pair | |
| * @slave: slave device | |
| * @master: new master device | |
| * | |
| * Changes the master device of the slave. Pass %NULL to break the | |
| * bonding. The caller must hold the RTNL semaphore. On a failure | |
| * a negative errno code is returned. On success the reference counts | |
| * are adjusted, %RTM_NEWLINK is sent to the routing socket and the | |
| * function returns zero. | |
| */ | |
| int netdev_set_master(struct net_device *slave, struct net_device *master) | |
| { | |
| struct net_device *old = slave->master; | |
| ASSERT_RTNL(); | |
| if (master) { | |
| if (old) | |
| return -EBUSY; | |
| dev_hold(master); | |
| } | |
| slave->master = master; | |
| synchronize_net(); | |
| if (old) | |
| dev_put(old); | |
| if (master) | |
| slave->flags |= IFF_SLAVE; | |
| else | |
| slave->flags &= ~IFF_SLAVE; | |
| rtmsg_ifinfo(RTM_NEWLINK, slave, IFF_SLAVE); | |
| return 0; | |
| } | |
| static void __dev_set_promiscuity(struct net_device *dev, int inc) | |
| { | |
| unsigned short old_flags = dev->flags; | |
| ASSERT_RTNL(); | |
| if ((dev->promiscuity += inc) == 0) | |
| dev->flags &= ~IFF_PROMISC; | |
| else | |
| dev->flags |= IFF_PROMISC; | |
| if (dev->flags != old_flags) { | |
| printk(KERN_INFO "device %s %s promiscuous mode\n", | |
| dev->name, (dev->flags & IFF_PROMISC) ? "entered" : | |
| "left"); | |
| audit_log(current->audit_context, GFP_ATOMIC, | |
| AUDIT_ANOM_PROMISCUOUS, | |
| "dev=%s prom=%d old_prom=%d auid=%u", | |
| dev->name, (dev->flags & IFF_PROMISC), | |
| (old_flags & IFF_PROMISC), | |
| audit_get_loginuid(current->audit_context)); | |
| if (dev->change_rx_flags) | |
| dev->change_rx_flags(dev, IFF_PROMISC); | |
| } | |
| } | |
| /** | |
| * dev_set_promiscuity - update promiscuity count on a device | |
| * @dev: device | |
| * @inc: modifier | |
| * | |
| * Add or remove promiscuity from a device. While the count in the device | |
| * remains above zero the interface remains promiscuous. Once it hits zero | |
| * the device reverts back to normal filtering operation. A negative inc | |
| * value is used to drop promiscuity on the device. | |
| */ | |
| void dev_set_promiscuity(struct net_device *dev, int inc) | |
| { | |
| unsigned short old_flags = dev->flags; | |
| __dev_set_promiscuity(dev, inc); | |
| if (dev->flags != old_flags) | |
| dev_set_rx_mode(dev); | |
| } | |
| /** | |
| * dev_set_allmulti - update allmulti count on a device | |
| * @dev: device | |
| * @inc: modifier | |
| * | |
| * Add or remove reception of all multicast frames to a device. While the | |
| * count in the device remains above zero the interface remains listening | |
| * to all interfaces. Once it hits zero the device reverts back to normal | |
| * filtering operation. A negative @inc value is used to drop the counter | |
| * when releasing a resource needing all multicasts. | |
| */ | |
| void dev_set_allmulti(struct net_device *dev, int inc) | |
| { | |
| unsigned short old_flags = dev->flags; | |
| ASSERT_RTNL(); | |
| dev->flags |= IFF_ALLMULTI; | |
| if ((dev->allmulti += inc) == 0) | |
| dev->flags &= ~IFF_ALLMULTI; | |
| if (dev->flags ^ old_flags) { | |
| if (dev->change_rx_flags) | |
| dev->change_rx_flags(dev, IFF_ALLMULTI); | |
| dev_set_rx_mode(dev); | |
| } | |
| } | |
| /* | |
| * Upload unicast and multicast address lists to device and | |
| * configure RX filtering. When the device doesn't support unicast | |
| * filtering it is put in promiscous mode while unicast addresses | |
| * are present. | |
| */ | |
| void __dev_set_rx_mode(struct net_device *dev) | |
| { | |
| /* dev_open will call this function so the list will stay sane. */ | |
| if (!(dev->flags&IFF_UP)) | |
| return; | |
| if (!netif_device_present(dev)) | |
| return; | |
| if (dev->set_rx_mode) | |
| dev->set_rx_mode(dev); | |
| else { | |
| /* Unicast addresses changes may only happen under the rtnl, | |
| * therefore calling __dev_set_promiscuity here is safe. | |
| */ | |
| if (dev->uc_count > 0 && !dev->uc_promisc) { | |
| __dev_set_promiscuity(dev, 1); | |
| dev->uc_promisc = 1; | |
| } else if (dev->uc_count == 0 && dev->uc_promisc) { | |
| __dev_set_promiscuity(dev, -1); | |
| dev->uc_promisc = 0; | |
| } | |
| if (dev->set_multicast_list) | |
| dev->set_multicast_list(dev); | |
| } | |
| } | |
| void dev_set_rx_mode(struct net_device *dev) | |
| { | |
| netif_tx_lock_bh(dev); | |
| __dev_set_rx_mode(dev); | |
| netif_tx_unlock_bh(dev); | |
| } | |
| int __dev_addr_delete(struct dev_addr_list **list, int *count, | |
| void *addr, int alen, int glbl) | |
| { | |
| struct dev_addr_list *da; | |
| for (; (da = *list) != NULL; list = &da->next) { | |
| if (memcmp(da->da_addr, addr, da->da_addrlen) == 0 && | |
| alen == da->da_addrlen) { | |
| if (glbl) { | |
| int old_glbl = da->da_gusers; | |
| da->da_gusers = 0; | |
| if (old_glbl == 0) | |
| break; | |
| } | |
| if (--da->da_users) | |
| return 0; | |
| *list = da->next; | |
| kfree(da); | |
| (*count)--; | |
| return 0; | |
| } | |
| } | |
| return -ENOENT; | |
| } | |
| int __dev_addr_add(struct dev_addr_list **list, int *count, | |
| void *addr, int alen, int glbl) | |
| { | |
| struct dev_addr_list *da; | |
| for (da = *list; da != NULL; da = da->next) { | |
| if (memcmp(da->da_addr, addr, da->da_addrlen) == 0 && | |
| da->da_addrlen == alen) { | |
| if (glbl) { | |
| int old_glbl = da->da_gusers; | |
| da->da_gusers = 1; | |
| if (old_glbl) | |
| return 0; | |
| } | |
| da->da_users++; | |
| return 0; | |
| } | |
| } | |
| da = kmalloc(sizeof(*da), GFP_ATOMIC); | |
| if (da == NULL) | |
| return -ENOMEM; | |
| memcpy(da->da_addr, addr, alen); | |
| da->da_addrlen = alen; | |
| da->da_users = 1; | |
| da->da_gusers = glbl ? 1 : 0; | |
| da->next = *list; | |
| *list = da; | |
| (*count)++; | |
| return 0; | |
| } | |
| /** | |
| * dev_unicast_delete - Release secondary unicast address. | |
| * @dev: device | |
| * @addr: address to delete | |
| * @alen: length of @addr | |
| * | |
| * Release reference to a secondary unicast address and remove it | |
| * from the device if the reference count drops to zero. | |
| * | |
| * The caller must hold the rtnl_mutex. | |
| */ | |
| int dev_unicast_delete(struct net_device *dev, void *addr, int alen) | |
| { | |
| int err; | |
| ASSERT_RTNL(); | |
| netif_tx_lock_bh(dev); | |
| err = __dev_addr_delete(&dev->uc_list, &dev->uc_count, addr, alen, 0); | |
| if (!err) | |
| __dev_set_rx_mode(dev); | |
| netif_tx_unlock_bh(dev); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(dev_unicast_delete); | |
| /** | |
| * dev_unicast_add - add a secondary unicast address | |
| * @dev: device | |
| * @addr: address to delete | |
| * @alen: length of @addr | |
| * | |
| * Add a secondary unicast address to the device or increase | |
| * the reference count if it already exists. | |
| * | |
| * The caller must hold the rtnl_mutex. | |
| */ | |
| int dev_unicast_add(struct net_device *dev, void *addr, int alen) | |
| { | |
| int err; | |
| ASSERT_RTNL(); | |
| netif_tx_lock_bh(dev); | |
| err = __dev_addr_add(&dev->uc_list, &dev->uc_count, addr, alen, 0); | |
| if (!err) | |
| __dev_set_rx_mode(dev); | |
| netif_tx_unlock_bh(dev); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(dev_unicast_add); | |
| static void __dev_addr_discard(struct dev_addr_list **list) | |
| { | |
| struct dev_addr_list *tmp; | |
| while (*list != NULL) { | |
| tmp = *list; | |
| *list = tmp->next; | |
| if (tmp->da_users > tmp->da_gusers) | |
| printk("__dev_addr_discard: address leakage! " | |
| "da_users=%d\n", tmp->da_users); | |
| kfree(tmp); | |
| } | |
| } | |
| static void dev_addr_discard(struct net_device *dev) | |
| { | |
| netif_tx_lock_bh(dev); | |
| __dev_addr_discard(&dev->uc_list); | |
| dev->uc_count = 0; | |
| __dev_addr_discard(&dev->mc_list); | |
| dev->mc_count = 0; | |
| netif_tx_unlock_bh(dev); | |
| } | |
| unsigned dev_get_flags(const struct net_device *dev) | |
| { | |
| unsigned flags; | |
| flags = (dev->flags & ~(IFF_PROMISC | | |
| IFF_ALLMULTI | | |
| IFF_RUNNING | | |
| IFF_LOWER_UP | | |
| IFF_DORMANT)) | | |
| (dev->gflags & (IFF_PROMISC | | |
| IFF_ALLMULTI)); | |
| if (netif_running(dev)) { | |
| if (netif_oper_up(dev)) | |
| flags |= IFF_RUNNING; | |
| if (netif_carrier_ok(dev)) | |
| flags |= IFF_LOWER_UP; | |
| if (netif_dormant(dev)) | |
| flags |= IFF_DORMANT; | |
| } | |
| return flags; | |
| } | |
| int dev_change_flags(struct net_device *dev, unsigned flags) | |
| { | |
| int ret, changes; | |
| int old_flags = dev->flags; | |
| ASSERT_RTNL(); | |
| /* | |
| * Set the flags on our device. | |
| */ | |
| dev->flags = (flags & (IFF_DEBUG | IFF_NOTRAILERS | IFF_NOARP | | |
| IFF_DYNAMIC | IFF_MULTICAST | IFF_PORTSEL | | |
| IFF_AUTOMEDIA)) | | |
| (dev->flags & (IFF_UP | IFF_VOLATILE | IFF_PROMISC | | |
| IFF_ALLMULTI)); | |
| /* | |
| * Load in the correct multicast list now the flags have changed. | |
| */ | |
| if (dev->change_rx_flags && (dev->flags ^ flags) & IFF_MULTICAST) | |
| dev->change_rx_flags(dev, IFF_MULTICAST); | |
| dev_set_rx_mode(dev); | |
| /* | |
| * Have we downed the interface. We handle IFF_UP ourselves | |
| * according to user attempts to set it, rather than blindly | |
| * setting it. | |
| */ | |
| ret = 0; | |
| if ((old_flags ^ flags) & IFF_UP) { /* Bit is different ? */ | |
| ret = ((old_flags & IFF_UP) ? dev_close : dev_open)(dev); | |
| if (!ret) | |
| dev_set_rx_mode(dev); | |
| } | |
| if (dev->flags & IFF_UP && | |
| ((old_flags ^ dev->flags) &~ (IFF_UP | IFF_PROMISC | IFF_ALLMULTI | | |
| IFF_VOLATILE))) | |
| call_netdevice_notifiers(NETDEV_CHANGE, dev); | |
| if ((flags ^ dev->gflags) & IFF_PROMISC) { | |
| int inc = (flags & IFF_PROMISC) ? +1 : -1; | |
| dev->gflags ^= IFF_PROMISC; | |
| dev_set_promiscuity(dev, inc); | |
| } | |
| /* NOTE: order of synchronization of IFF_PROMISC and IFF_ALLMULTI | |
| is important. Some (broken) drivers set IFF_PROMISC, when | |
| IFF_ALLMULTI is requested not asking us and not reporting. | |
| */ | |
| if ((flags ^ dev->gflags) & IFF_ALLMULTI) { | |
| int inc = (flags & IFF_ALLMULTI) ? +1 : -1; | |
| dev->gflags ^= IFF_ALLMULTI; | |
| dev_set_allmulti(dev, inc); | |
| } | |
| /* Exclude state transition flags, already notified */ | |
| changes = (old_flags ^ dev->flags) & ~(IFF_UP | IFF_RUNNING); | |
| if (changes) | |
| rtmsg_ifinfo(RTM_NEWLINK, dev, changes); | |
| return ret; | |
| } | |
| int dev_set_mtu(struct net_device *dev, int new_mtu) | |
| { | |
| int err; | |
| if (new_mtu == dev->mtu) | |
| return 0; | |
| /* MTU must be positive. */ | |
| if (new_mtu < 0) | |
| return -EINVAL; | |
| if (!netif_device_present(dev)) | |
| return -ENODEV; | |
| err = 0; | |
| if (dev->change_mtu) | |
| err = dev->change_mtu(dev, new_mtu); | |
| else | |
| dev->mtu = new_mtu; | |
| if (!err && dev->flags & IFF_UP) | |
| call_netdevice_notifiers(NETDEV_CHANGEMTU, dev); | |
| return err; | |
| } | |
| int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa) | |
| { | |
| int err; | |
| if (!dev->set_mac_address) | |
| return -EOPNOTSUPP; | |
| if (sa->sa_family != dev->type) | |
| return -EINVAL; | |
| if (!netif_device_present(dev)) | |
| return -ENODEV; | |
| err = dev->set_mac_address(dev, sa); | |
| if (!err) | |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); | |
| return err; | |
| } | |
| /* | |
| * Perform the SIOCxIFxxx calls, inside read_lock(dev_base_lock) | |
| */ | |
| static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cmd) | |
| { | |
| int err; | |
| struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name); | |
| if (!dev) | |
| return -ENODEV; | |
| switch (cmd) { | |
| case SIOCGIFFLAGS: /* Get interface flags */ | |
| ifr->ifr_flags = dev_get_flags(dev); | |
| return 0; | |
| case SIOCGIFMETRIC: /* Get the metric on the interface | |
| (currently unused) */ | |
| ifr->ifr_metric = 0; | |
| return 0; | |
| case SIOCGIFMTU: /* Get the MTU of a device */ | |
| ifr->ifr_mtu = dev->mtu; | |
| return 0; | |
| case SIOCGIFHWADDR: | |
| if (!dev->addr_len) | |
| memset(ifr->ifr_hwaddr.sa_data, 0, sizeof ifr->ifr_hwaddr.sa_data); | |
| else | |
| memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr, | |
| min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); | |
| ifr->ifr_hwaddr.sa_family = dev->type; | |
| return 0; | |
| case SIOCGIFSLAVE: | |
| err = -EINVAL; | |
| break; | |
| case SIOCGIFMAP: | |
| ifr->ifr_map.mem_start = dev->mem_start; | |
| ifr->ifr_map.mem_end = dev->mem_end; | |
| ifr->ifr_map.base_addr = dev->base_addr; | |
| ifr->ifr_map.irq = dev->irq; | |
| ifr->ifr_map.dma = dev->dma; | |
| ifr->ifr_map.port = dev->if_port; | |
| return 0; | |
| case SIOCGIFINDEX: | |
| ifr->ifr_ifindex = dev->ifindex; | |
| return 0; | |
| case SIOCGIFTXQLEN: | |
| ifr->ifr_qlen = dev->tx_queue_len; | |
| return 0; | |
| default: | |
| /* dev_ioctl() should ensure this case | |
| * is never reached | |
| */ | |
| WARN_ON(1); | |
| err = -EINVAL; | |
| break; | |
| } | |
| return err; | |
| } | |
| /* | |
| * Perform the SIOCxIFxxx calls, inside rtnl_lock() | |
| */ | |
| static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd) | |
| { | |
| int err; | |
| struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name); | |
| if (!dev) | |
| return -ENODEV; | |
| switch (cmd) { | |
| case SIOCSIFFLAGS: /* Set interface flags */ | |
| return dev_change_flags(dev, ifr->ifr_flags); | |
| case SIOCSIFMETRIC: /* Set the metric on the interface | |
| (currently unused) */ | |
| return -EOPNOTSUPP; | |
| case SIOCSIFMTU: /* Set the MTU of a device */ | |
| return dev_set_mtu(dev, ifr->ifr_mtu); | |
| case SIOCSIFHWADDR: | |
| return dev_set_mac_address(dev, &ifr->ifr_hwaddr); | |
| case SIOCSIFHWBROADCAST: | |
| if (ifr->ifr_hwaddr.sa_family != dev->type) | |
| return -EINVAL; | |
| memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data, | |
| min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len)); | |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); | |
| return 0; | |
| case SIOCSIFMAP: | |
| if (dev->set_config) { | |
| if (!netif_device_present(dev)) | |
| return -ENODEV; | |
| return dev->set_config(dev, &ifr->ifr_map); | |
| } | |
| return -EOPNOTSUPP; | |
| case SIOCADDMULTI: | |
| if (!dev->set_multicast_list || | |
| ifr->ifr_hwaddr.sa_family != AF_UNSPEC) | |
| return -EINVAL; | |
| if (!netif_device_present(dev)) | |
| return -ENODEV; | |
| return dev_mc_add(dev, ifr->ifr_hwaddr.sa_data, | |
| dev->addr_len, 1); | |
| case SIOCDELMULTI: | |
| if (!dev->set_multicast_list || | |
| ifr->ifr_hwaddr.sa_family != AF_UNSPEC) | |
| return -EINVAL; | |
| if (!netif_device_present(dev)) | |
| return -ENODEV; | |
| return dev_mc_delete(dev, ifr->ifr_hwaddr.sa_data, | |
| dev->addr_len, 1); | |
| case SIOCSIFTXQLEN: | |
| if (ifr->ifr_qlen < 0) | |
| return -EINVAL; | |
| dev->tx_queue_len = ifr->ifr_qlen; | |
| return 0; | |
| case SIOCSIFNAME: | |
| ifr->ifr_newname[IFNAMSIZ-1] = '\0'; | |
| return dev_change_name(dev, ifr->ifr_newname); | |
| /* | |
| * Unknown or private ioctl | |
| */ | |
| default: | |
| if ((cmd >= SIOCDEVPRIVATE && | |
| cmd <= SIOCDEVPRIVATE + 15) || | |
| cmd == SIOCBONDENSLAVE || | |
| cmd == SIOCBONDRELEASE || | |
| cmd == SIOCBONDSETHWADDR || | |
| cmd == SIOCBONDSLAVEINFOQUERY || | |
| cmd == SIOCBONDINFOQUERY || | |
| cmd == SIOCBONDCHANGEACTIVE || | |
| cmd == SIOCGMIIPHY || | |
| cmd == SIOCGMIIREG || | |
| cmd == SIOCSMIIREG || | |
| cmd == SIOCBRADDIF || | |
| cmd == SIOCBRDELIF || | |
| cmd == SIOCWANDEV) { | |
| err = -EOPNOTSUPP; | |
| if (dev->do_ioctl) { | |
| if (netif_device_present(dev)) | |
| err = dev->do_ioctl(dev, ifr, | |
| cmd); | |
| else | |
| err = -ENODEV; | |
| } | |
| } else | |
| err = -EINVAL; | |
| } | |
| return err; | |
| } | |
| /* | |
| * This function handles all "interface"-type I/O control requests. The actual | |
| * 'doing' part of this is dev_ifsioc above. | |
| */ | |
| /** | |
| * dev_ioctl - network device ioctl | |
| * @cmd: command to issue | |
| * @arg: pointer to a struct ifreq in user space | |
| * | |
| * Issue ioctl functions to devices. This is normally called by the | |
| * user space syscall interfaces but can sometimes be useful for | |
| * other purposes. The return value is the return from the syscall if | |
| * positive or a negative errno code on error. | |
| */ | |
| int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg) | |
| { | |
| struct ifreq ifr; | |
| int ret; | |
| char *colon; | |
| /* One special case: SIOCGIFCONF takes ifconf argument | |
| and requires shared lock, because it sleeps writing | |
| to user space. | |
| */ | |
| if (cmd == SIOCGIFCONF) { | |
| rtnl_lock(); | |
| ret = dev_ifconf(net, (char __user *) arg); | |
| rtnl_unlock(); | |
| return ret; | |
| } | |
| if (cmd == SIOCGIFNAME) | |
| return dev_ifname(net, (struct ifreq __user *)arg); | |
| if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) | |
| return -EFAULT; | |
| ifr.ifr_name[IFNAMSIZ-1] = 0; | |
| colon = strchr(ifr.ifr_name, ':'); | |
| if (colon) | |
| *colon = 0; | |
| /* | |
| * See which interface the caller is talking about. | |
| */ | |
| switch (cmd) { | |
| /* | |
| * These ioctl calls: | |
| * - can be done by all. | |
| * - atomic and do not require locking. | |
| * - return a value | |
| */ | |
| case SIOCGIFFLAGS: | |
| case SIOCGIFMETRIC: | |
| case SIOCGIFMTU: | |
| case SIOCGIFHWADDR: | |
| case SIOCGIFSLAVE: | |
| case SIOCGIFMAP: | |
| case SIOCGIFINDEX: | |
| case SIOCGIFTXQLEN: | |
| dev_load(net, ifr.ifr_name); | |
| read_lock(&dev_base_lock); | |
| ret = dev_ifsioc_locked(net, &ifr, cmd); | |
| read_unlock(&dev_base_lock); | |
| if (!ret) { | |
| if (colon) | |
| *colon = ':'; | |
| if (copy_to_user(arg, &ifr, | |
| sizeof(struct ifreq))) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| case SIOCETHTOOL: | |
| dev_load(net, ifr.ifr_name); | |
| rtnl_lock(); | |
| ret = dev_ethtool(net, &ifr); | |
| rtnl_unlock(); | |
| if (!ret) { | |
| if (colon) | |
| *colon = ':'; | |
| if (copy_to_user(arg, &ifr, | |
| sizeof(struct ifreq))) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| /* | |
| * These ioctl calls: | |
| * - require superuser power. | |
| * - require strict serialization. | |
| * - return a value | |
| */ | |
| case SIOCGMIIPHY: | |
| case SIOCGMIIREG: | |
| case SIOCSIFNAME: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| dev_load(net, ifr.ifr_name); | |
| rtnl_lock(); | |
| ret = dev_ifsioc(net, &ifr, cmd); | |
| rtnl_unlock(); | |
| if (!ret) { | |
| if (colon) | |
| *colon = ':'; | |
| if (copy_to_user(arg, &ifr, | |
| sizeof(struct ifreq))) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| /* | |
| * These ioctl calls: | |
| * - require superuser power. | |
| * - require strict serialization. | |
| * - do not return a value | |
| */ | |
| case SIOCSIFFLAGS: | |
| case SIOCSIFMETRIC: | |
| case SIOCSIFMTU: | |
| case SIOCSIFMAP: | |
| case SIOCSIFHWADDR: | |
| case SIOCSIFSLAVE: | |
| case SIOCADDMULTI: | |
| case SIOCDELMULTI: | |
| case SIOCSIFHWBROADCAST: | |
| case SIOCSIFTXQLEN: | |
| case SIOCSMIIREG: | |
| case SIOCBONDENSLAVE: | |
| case SIOCBONDRELEASE: | |
| case SIOCBONDSETHWADDR: | |
| case SIOCBONDCHANGEACTIVE: | |
| case SIOCBRADDIF: | |
| case SIOCBRDELIF: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| /* fall through */ | |
| case SIOCBONDSLAVEINFOQUERY: | |
| case SIOCBONDINFOQUERY: | |
| dev_load(net, ifr.ifr_name); | |
| rtnl_lock(); | |
| ret = dev_ifsioc(net, &ifr, cmd); | |
| rtnl_unlock(); | |
| return ret; | |
| case SIOCGIFMEM: | |
| /* Get the per device memory space. We can add this but | |
| * currently do not support it */ | |
| case SIOCSIFMEM: | |
| /* Set the per device memory buffer space. | |
| * Not applicable in our case */ | |
| case SIOCSIFLINK: | |
| return -EINVAL; | |
| /* | |
| * Unknown or private ioctl. | |
| */ | |
| default: | |
| if (cmd == SIOCWANDEV || | |
| (cmd >= SIOCDEVPRIVATE && | |
| cmd <= SIOCDEVPRIVATE + 15)) { | |
| dev_load(net, ifr.ifr_name); | |
| rtnl_lock(); | |
| ret = dev_ifsioc(net, &ifr, cmd); | |
| rtnl_unlock(); | |
| if (!ret && copy_to_user(arg, &ifr, | |
| sizeof(struct ifreq))) | |
| ret = -EFAULT; | |
| return ret; | |
| } | |
| /* Take care of Wireless Extensions */ | |
| if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) | |
| return wext_handle_ioctl(net, &ifr, cmd, arg); | |
| return -EINVAL; | |
| } | |
| } | |
| /** | |
| * dev_new_index - allocate an ifindex | |
| * | |
| * Returns a suitable unique value for a new device interface | |
| * number. The caller must hold the rtnl semaphore or the | |
| * dev_base_lock to be sure it remains unique. | |
| */ | |
| static int dev_new_index(struct net *net) | |
| { | |
| static int ifindex; | |
| for (;;) { | |
| if (++ifindex <= 0) | |
| ifindex = 1; | |
| if (!__dev_get_by_index(net, ifindex)) | |
| return ifindex; | |
| } | |
| } | |
| /* Delayed registration/unregisteration */ | |
| static DEFINE_SPINLOCK(net_todo_list_lock); | |
| static struct list_head net_todo_list = LIST_HEAD_INIT(net_todo_list); | |
| static void net_set_todo(struct net_device *dev) | |
| { | |
| spin_lock(&net_todo_list_lock); | |
| list_add_tail(&dev->todo_list, &net_todo_list); | |
| spin_unlock(&net_todo_list_lock); | |
| } | |
| /** | |
| * register_netdevice - register a network device | |
| * @dev: device to register | |
| * | |
| * Take a completed network device structure and add it to the kernel | |
| * interfaces. A %NETDEV_REGISTER message is sent to the netdev notifier | |
| * chain. 0 is returned on success. A negative errno code is returned | |
| * on a failure to set up the device, or if the name is a duplicate. | |
| * | |
| * Callers must hold the rtnl semaphore. You may want | |
| * register_netdev() instead of this. | |
| * | |
| * BUGS: | |
| * The locking appears insufficient to guarantee two parallel registers | |
| * will not get the same name. | |
| */ | |
| int register_netdevice(struct net_device *dev) | |
| { | |
| struct hlist_head *head; | |
| struct hlist_node *p; | |
| int ret; | |
| struct net *net; | |
| BUG_ON(dev_boot_phase); | |
| ASSERT_RTNL(); | |
| might_sleep(); | |
| /* When net_device's are persistent, this will be fatal. */ | |
| BUG_ON(dev->reg_state != NETREG_UNINITIALIZED); | |
| BUG_ON(!dev->nd_net); | |
| net = dev->nd_net; | |
| spin_lock_init(&dev->queue_lock); | |
| spin_lock_init(&dev->_xmit_lock); | |
| netdev_set_lockdep_class(&dev->_xmit_lock, dev->type); | |
| dev->xmit_lock_owner = -1; | |
| spin_lock_init(&dev->ingress_lock); | |
| dev->iflink = -1; | |
| /* Init, if this function is available */ | |
| if (dev->init) { | |
| ret = dev->init(dev); | |
| if (ret) { | |
| if (ret > 0) | |
| ret = -EIO; | |
| goto out; | |
| } | |
| } | |
| if (!dev_valid_name(dev->name)) { | |
| ret = -EINVAL; | |
| goto err_uninit; | |
| } | |
| dev->ifindex = dev_new_index(net); | |
| if (dev->iflink == -1) | |
| dev->iflink = dev->ifindex; | |
| /* Check for existence of name */ | |
| head = dev_name_hash(net, dev->name); | |
| hlist_for_each(p, head) { | |
| struct net_device *d | |
| = hlist_entry(p, struct net_device, name_hlist); | |
| if (!strncmp(d->name, dev->name, IFNAMSIZ)) { | |
| ret = -EEXIST; | |
| goto err_uninit; | |
| } | |
| } | |
| /* Fix illegal checksum combinations */ | |
| if ((dev->features & NETIF_F_HW_CSUM) && | |
| (dev->features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) { | |
| printk(KERN_NOTICE "%s: mixed HW and IP checksum settings.\n", | |
| dev->name); | |
| dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM); | |
| } | |
| if ((dev->features & NETIF_F_NO_CSUM) && | |
| (dev->features & (NETIF_F_HW_CSUM|NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) { | |
| printk(KERN_NOTICE "%s: mixed no checksumming and other settings.\n", | |
| dev->name); | |
| dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM|NETIF_F_HW_CSUM); | |
| } | |
| /* Fix illegal SG+CSUM combinations. */ | |
| if ((dev->features & NETIF_F_SG) && | |
| !(dev->features & NETIF_F_ALL_CSUM)) { | |
| printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no checksum feature.\n", | |
| dev->name); | |
| dev->features &= ~NETIF_F_SG; | |
| } | |
| /* TSO requires that SG is present as well. */ | |
| if ((dev->features & NETIF_F_TSO) && | |
| !(dev->features & NETIF_F_SG)) { | |
| printk(KERN_NOTICE "%s: Dropping NETIF_F_TSO since no SG feature.\n", | |
| dev->name); | |
| dev->features &= ~NETIF_F_TSO; | |
| } | |
| if (dev->features & NETIF_F_UFO) { | |
| if (!(dev->features & NETIF_F_HW_CSUM)) { | |
| printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no " | |
| "NETIF_F_HW_CSUM feature.\n", | |
| dev->name); | |
| dev->features &= ~NETIF_F_UFO; | |
| } | |
| if (!(dev->features & NETIF_F_SG)) { | |
| printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no " | |
| "NETIF_F_SG feature.\n", | |
| dev->name); | |
| dev->features &= ~NETIF_F_UFO; | |
| } | |
| } | |
| ret = netdev_register_kobject(dev); | |
| if (ret) | |
| goto err_uninit; | |
| dev->reg_state = NETREG_REGISTERED; | |
| /* | |
| * Default initial state at registry is that the | |
| * device is present. | |
| */ | |
| set_bit(__LINK_STATE_PRESENT, &dev->state); | |
| dev_init_scheduler(dev); | |
| dev_hold(dev); | |
| list_netdevice(dev); | |
| /* Notify protocols, that a new device appeared. */ | |
| ret = call_netdevice_notifiers(NETDEV_REGISTER, dev); | |
| ret = notifier_to_errno(ret); | |
| if (ret) | |
| unregister_netdevice(dev); | |
| out: | |
| return ret; | |
| err_uninit: | |
| if (dev->uninit) | |
| dev->uninit(dev); | |
| goto out; | |
| } | |
| /** | |
| * register_netdev - register a network device | |
| * @dev: device to register | |
| * | |
| * Take a completed network device structure and add it to the kernel | |
| * interfaces. A %NETDEV_REGISTER message is sent to the netdev notifier | |
| * chain. 0 is returned on success. A negative errno code is returned | |
| * on a failure to set up the device, or if the name is a duplicate. | |
| * | |
| * This is a wrapper around register_netdevice that takes the rtnl semaphore | |
| * and expands the device name if you passed a format string to | |
| * alloc_netdev. | |
| */ | |
| int register_netdev(struct net_device *dev) | |
| { | |
| int err; | |
| rtnl_lock(); | |
| /* | |
| * If the name is a format string the caller wants us to do a | |
| * name allocation. | |
| */ | |
| if (strchr(dev->name, '%')) { | |
| err = dev_alloc_name(dev, dev->name); | |
| if (err < 0) | |
| goto out; | |
| } | |
| err = register_netdevice(dev); | |
| out: | |
| rtnl_unlock(); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(register_netdev); | |
| /* | |
| * netdev_wait_allrefs - wait until all references are gone. | |
| * | |
| * This is called when unregistering network devices. | |
| * | |
| * Any protocol or device that holds a reference should register | |
| * for netdevice notification, and cleanup and put back the | |
| * reference if they receive an UNREGISTER event. | |
| * We can get stuck here if buggy protocols don't correctly | |
| * call dev_put. | |
| */ | |
| static void netdev_wait_allrefs(struct net_device *dev) | |
| { | |
| unsigned long rebroadcast_time, warning_time; | |
| rebroadcast_time = warning_time = jiffies; | |
| while (atomic_read(&dev->refcnt) != 0) { | |
| if (time_after(jiffies, rebroadcast_time + 1 * HZ)) { | |
| rtnl_lock(); | |
| /* Rebroadcast unregister notification */ | |
| call_netdevice_notifiers(NETDEV_UNREGISTER, dev); | |
| if (test_bit(__LINK_STATE_LINKWATCH_PENDING, | |
| &dev->state)) { | |
| /* We must not have linkwatch events | |
| * pending on unregister. If this | |
| * happens, we simply run the queue | |
| * unscheduled, resulting in a noop | |
| * for this device. | |
| */ | |
| linkwatch_run_queue(); | |
| } | |
| __rtnl_unlock(); | |
| rebroadcast_time = jiffies; | |
| } | |
| msleep(250); | |
| if (time_after(jiffies, warning_time + 10 * HZ)) { | |
| printk(KERN_EMERG "unregister_netdevice: " | |
| "waiting for %s to become free. Usage " | |
| "count = %d\n", | |
| dev->name, atomic_read(&dev->refcnt)); | |
| warning_time = jiffies; | |
| } | |
| } | |
| } | |
| /* The sequence is: | |
| * | |
| * rtnl_lock(); | |
| * ... | |
| * register_netdevice(x1); | |
| * register_netdevice(x2); | |
| * ... | |
| * unregister_netdevice(y1); | |
| * unregister_netdevice(y2); | |
| * ... | |
| * rtnl_unlock(); | |
| * free_netdev(y1); | |
| * free_netdev(y2); | |
| * | |
| * We are invoked by rtnl_unlock() after it drops the semaphore. | |
| * This allows us to deal with problems: | |
| * 1) We can delete sysfs objects which invoke hotplug | |
| * without deadlocking with linkwatch via keventd. | |
| * 2) Since we run with the RTNL semaphore not held, we can sleep | |
| * safely in order to wait for the netdev refcnt to drop to zero. | |
| */ | |
| static DEFINE_MUTEX(net_todo_run_mutex); | |
| void netdev_run_todo(void) | |
| { | |
| struct list_head list; | |
| /* Need to guard against multiple cpu's getting out of order. */ | |
| mutex_lock(&net_todo_run_mutex); | |
| /* Not safe to do outside the semaphore. We must not return | |
| * until all unregister events invoked by the local processor | |
| * have been completed (either by this todo run, or one on | |
| * another cpu). | |
| */ | |
| if (list_empty(&net_todo_list)) | |
| goto out; | |
| /* Snapshot list, allow later requests */ | |
| spin_lock(&net_todo_list_lock); | |
| list_replace_init(&net_todo_list, &list); | |
| spin_unlock(&net_todo_list_lock); | |
| while (!list_empty(&list)) { | |
| struct net_device *dev | |
| = list_entry(list.next, struct net_device, todo_list); | |
| list_del(&dev->todo_list); | |
| if (unlikely(dev->reg_state != NETREG_UNREGISTERING)) { | |
| printk(KERN_ERR "network todo '%s' but state %d\n", | |
| dev->name, dev->reg_state); | |
| dump_stack(); | |
| continue; | |
| } | |
| dev->reg_state = NETREG_UNREGISTERED; | |
| netdev_wait_allrefs(dev); | |
| /* paranoia */ | |
| BUG_ON(atomic_read(&dev->refcnt)); | |
| BUG_TRAP(!dev->ip_ptr); | |
| BUG_TRAP(!dev->ip6_ptr); | |
| BUG_TRAP(!dev->dn_ptr); | |
| if (dev->destructor) | |
| dev->destructor(dev); | |
| /* Free network device */ | |
| kobject_put(&dev->dev.kobj); | |
| } | |
| out: | |
| mutex_unlock(&net_todo_run_mutex); | |
| } | |
| static struct net_device_stats *internal_stats(struct net_device *dev) | |
| { | |
| return &dev->stats; | |
| } | |
| /** | |
| * alloc_netdev_mq - allocate network device | |
| * @sizeof_priv: size of private data to allocate space for | |
| * @name: device name format string | |
| * @setup: callback to initialize device | |
| * @queue_count: the number of subqueues to allocate | |
| * | |
| * Allocates a struct net_device with private data area for driver use | |
| * and performs basic initialization. Also allocates subquue structs | |
| * for each queue on the device at the end of the netdevice. | |
| */ | |
| struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name, | |
| void (*setup)(struct net_device *), unsigned int queue_count) | |
| { | |
| void *p; | |
| struct net_device *dev; | |
| int alloc_size; | |
| BUG_ON(strlen(name) >= sizeof(dev->name)); | |
| /* ensure 32-byte alignment of both the device and private area */ | |
| alloc_size = (sizeof(*dev) + NETDEV_ALIGN_CONST + | |
| (sizeof(struct net_device_subqueue) * (queue_count - 1))) & | |
| ~NETDEV_ALIGN_CONST; | |
| alloc_size += sizeof_priv + NETDEV_ALIGN_CONST; | |
| p = kzalloc(alloc_size, GFP_KERNEL); | |
| if (!p) { | |
| printk(KERN_ERR "alloc_netdev: Unable to allocate device.\n"); | |
| return NULL; | |
| } | |
| dev = (struct net_device *) | |
| (((long)p + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST); | |
| dev->padded = (char *)dev - (char *)p; | |
| dev->nd_net = &init_net; | |
| if (sizeof_priv) { | |
| dev->priv = ((char *)dev + | |
| ((sizeof(struct net_device) + | |
| (sizeof(struct net_device_subqueue) * | |
| (queue_count - 1)) + NETDEV_ALIGN_CONST) | |
| & ~NETDEV_ALIGN_CONST)); | |
| } | |
| dev->egress_subqueue_count = queue_count; | |
| dev->get_stats = internal_stats; | |
| netpoll_netdev_init(dev); | |
| setup(dev); | |
| strcpy(dev->name, name); | |
| return dev; | |
| } | |
| EXPORT_SYMBOL(alloc_netdev_mq); | |
| /** | |
| * free_netdev - free network device | |
| * @dev: device | |
| * | |
| * This function does the last stage of destroying an allocated device | |
| * interface. The reference to the device object is released. | |
| * If this is the last reference then it will be freed. | |
| */ | |
| void free_netdev(struct net_device *dev) | |
| { | |
| /* Compatibility with error handling in drivers */ | |
| if (dev->reg_state == NETREG_UNINITIALIZED) { | |
| kfree((char *)dev - dev->padded); | |
| return; | |
| } | |
| BUG_ON(dev->reg_state != NETREG_UNREGISTERED); | |
| dev->reg_state = NETREG_RELEASED; | |
| /* will free via device release */ | |
| put_device(&dev->dev); | |
| } | |
| /* Synchronize with packet receive processing. */ | |
| void synchronize_net(void) | |
| { | |
| might_sleep(); | |
| synchronize_rcu(); | |
| } | |
| /** | |
| * unregister_netdevice - remove device from the kernel | |
| * @dev: device | |
| * | |
| * This function shuts down a device interface and removes it | |
| * from the kernel tables. On success 0 is returned, on a failure | |
| * a negative errno code is returned. | |
| * | |
| * Callers must hold the rtnl semaphore. You may want | |
| * unregister_netdev() instead of this. | |
| */ | |
| void unregister_netdevice(struct net_device *dev) | |
| { | |
| BUG_ON(dev_boot_phase); | |
| ASSERT_RTNL(); | |
| /* Some devices call without registering for initialization unwind. */ | |
| if (dev->reg_state == NETREG_UNINITIALIZED) { | |
| printk(KERN_DEBUG "unregister_netdevice: device %s/%p never " | |
| "was registered\n", dev->name, dev); | |
| WARN_ON(1); | |
| return; | |
| } | |
| BUG_ON(dev->reg_state != NETREG_REGISTERED); | |
| /* If device is running, close it first. */ | |
| dev_close(dev); | |
| /* And unlink it from device chain. */ | |
| unlist_netdevice(dev); | |
| dev->reg_state = NETREG_UNREGISTERING; | |
| synchronize_net(); | |
| /* Shutdown queueing discipline. */ | |
| dev_shutdown(dev); | |
| /* Notify protocols, that we are about to destroy | |
| this device. They should clean all the things. | |
| */ | |
| call_netdevice_notifiers(NETDEV_UNREGISTER, dev); | |
| /* | |
| * Flush the unicast and multicast chains | |
| */ | |
| dev_addr_discard(dev); | |
| if (dev->uninit) | |
| dev->uninit(dev); | |
| /* Notifier chain MUST detach us from master device. */ | |
| BUG_TRAP(!dev->master); | |
| /* Remove entries from kobject tree */ | |
| netdev_unregister_kobject(dev); | |
| /* Finish processing unregister after unlock */ | |
| net_set_todo(dev); | |
| synchronize_net(); | |
| dev_put(dev); | |
| } | |
| /** | |
| * unregister_netdev - remove device from the kernel | |
| * @dev: device | |
| * | |
| * This function shuts down a device interface and removes it | |
| * from the kernel tables. On success 0 is returned, on a failure | |
| * a negative errno code is returned. | |
| * | |
| * This is just a wrapper for unregister_netdevice that takes | |
| * the rtnl semaphore. In general you want to use this and not | |
| * unregister_netdevice. | |
| */ | |
| void unregister_netdev(struct net_device *dev) | |
| { | |
| rtnl_lock(); | |
| unregister_netdevice(dev); | |
| rtnl_unlock(); | |
| } | |
| EXPORT_SYMBOL(unregister_netdev); | |
| /** | |
| * dev_change_net_namespace - move device to different nethost namespace | |
| * @dev: device | |
| * @net: network namespace | |
| * @pat: If not NULL name pattern to try if the current device name | |
| * is already taken in the destination network namespace. | |
| * | |
| * This function shuts down a device interface and moves it | |
| * to a new network namespace. On success 0 is returned, on | |
| * a failure a netagive errno code is returned. | |
| * | |
| * Callers must hold the rtnl semaphore. | |
| */ | |
| int dev_change_net_namespace(struct net_device *dev, struct net *net, const char *pat) | |
| { | |
| char buf[IFNAMSIZ]; | |
| const char *destname; | |
| int err; | |
| ASSERT_RTNL(); | |
| /* Don't allow namespace local devices to be moved. */ | |
| err = -EINVAL; | |
| if (dev->features & NETIF_F_NETNS_LOCAL) | |
| goto out; | |
| /* Ensure the device has been registrered */ | |
| err = -EINVAL; | |
| if (dev->reg_state != NETREG_REGISTERED) | |
| goto out; | |
| /* Get out if there is nothing todo */ | |
| err = 0; | |
| if (dev->nd_net == net) | |
| goto out; | |
| /* Pick the destination device name, and ensure | |
| * we can use it in the destination network namespace. | |
| */ | |
| err = -EEXIST; | |
| destname = dev->name; | |
| if (__dev_get_by_name(net, destname)) { | |
| /* We get here if we can't use the current device name */ | |
| if (!pat) | |
| goto out; | |
| if (!dev_valid_name(pat)) | |
| goto out; | |
| if (strchr(pat, '%')) { | |
| if (__dev_alloc_name(net, pat, buf) < 0) | |
| goto out; | |
| destname = buf; | |
| } else | |
| destname = pat; | |
| if (__dev_get_by_name(net, destname)) | |
| goto out; | |
| } | |
| /* | |
| * And now a mini version of register_netdevice unregister_netdevice. | |
| */ | |
| /* If device is running close it first. */ | |
| dev_close(dev); | |
| /* And unlink it from device chain */ | |
| err = -ENODEV; | |
| unlist_netdevice(dev); | |
| synchronize_net(); | |
| /* Shutdown queueing discipline. */ | |
| dev_shutdown(dev); | |
| /* Notify protocols, that we are about to destroy | |
| this device. They should clean all the things. | |
| */ | |
| call_netdevice_notifiers(NETDEV_UNREGISTER, dev); | |
| /* | |
| * Flush the unicast and multicast chains | |
| */ | |
| dev_addr_discard(dev); | |
| /* Actually switch the network namespace */ | |
| dev->nd_net = net; | |
| /* Assign the new device name */ | |
| if (destname != dev->name) | |
| strcpy(dev->name, destname); | |
| /* If there is an ifindex conflict assign a new one */ | |
| if (__dev_get_by_index(net, dev->ifindex)) { | |
| int iflink = (dev->iflink == dev->ifindex); | |
| dev->ifindex = dev_new_index(net); | |
| if (iflink) | |
| dev->iflink = dev->ifindex; | |
| } | |
| /* Fixup kobjects */ | |
| err = device_rename(&dev->dev, dev->name); | |
| WARN_ON(err); | |
| /* Add the device back in the hashes */ | |
| list_netdevice(dev); | |
| /* Notify protocols, that a new device appeared. */ | |
| call_netdevice_notifiers(NETDEV_REGISTER, dev); | |
| synchronize_net(); | |
| err = 0; | |
| out: | |
| return err; | |
| } | |
| static int dev_cpu_callback(struct notifier_block *nfb, | |
| unsigned long action, | |
| void *ocpu) | |
| { | |
| struct sk_buff **list_skb; | |
| struct net_device **list_net; | |
| struct sk_buff *skb; | |
| unsigned int cpu, oldcpu = (unsigned long)ocpu; | |
| struct softnet_data *sd, *oldsd; | |
| if (action != CPU_DEAD && action != CPU_DEAD_FROZEN) | |
| return NOTIFY_OK; | |
| local_irq_disable(); | |
| cpu = smp_processor_id(); | |
| sd = &per_cpu(softnet_data, cpu); | |
| oldsd = &per_cpu(softnet_data, oldcpu); | |
| /* Find end of our completion_queue. */ | |
| list_skb = &sd->completion_queue; | |
| while (*list_skb) | |
| list_skb = &(*list_skb)->next; | |
| /* Append completion queue from offline CPU. */ | |
| *list_skb = oldsd->completion_queue; | |
| oldsd->completion_queue = NULL; | |
| /* Find end of our output_queue. */ | |
| list_net = &sd->output_queue; | |
| while (*list_net) | |
| list_net = &(*list_net)->next_sched; | |
| /* Append output queue from offline CPU. */ | |
| *list_net = oldsd->output_queue; | |
| oldsd->output_queue = NULL; | |
| raise_softirq_irqoff(NET_TX_SOFTIRQ); | |
| local_irq_enable(); | |
| /* Process offline CPU's input_pkt_queue */ | |
| while ((skb = __skb_dequeue(&oldsd->input_pkt_queue))) | |
| netif_rx(skb); | |
| return NOTIFY_OK; | |
| } | |
| #ifdef CONFIG_NET_DMA | |
| /** | |
| * net_dma_rebalance - try to maintain one DMA channel per CPU | |
| * @net_dma: DMA client and associated data (lock, channels, channel_mask) | |
| * | |
| * This is called when the number of channels allocated to the net_dma client | |
| * changes. The net_dma client tries to have one DMA channel per CPU. | |
| */ | |
| static void net_dma_rebalance(struct net_dma *net_dma) | |
| { | |
| unsigned int cpu, i, n, chan_idx; | |
| struct dma_chan *chan; | |
| if (cpus_empty(net_dma->channel_mask)) { | |
| for_each_online_cpu(cpu) | |
| rcu_assign_pointer(per_cpu(softnet_data, cpu).net_dma, NULL); | |
| return; | |
| } | |
| i = 0; | |
| cpu = first_cpu(cpu_online_map); | |
| for_each_cpu_mask(chan_idx, net_dma->channel_mask) { | |
| chan = net_dma->channels[chan_idx]; | |
| n = ((num_online_cpus() / cpus_weight(net_dma->channel_mask)) | |
| + (i < (num_online_cpus() % | |
| cpus_weight(net_dma->channel_mask)) ? 1 : 0)); | |
| while(n) { | |
| per_cpu(softnet_data, cpu).net_dma = chan; | |
| cpu = next_cpu(cpu, cpu_online_map); | |
| n--; | |
| } | |
| i++; | |
| } | |
| } | |
| /** | |
| * netdev_dma_event - event callback for the net_dma_client | |
| * @client: should always be net_dma_client | |
| * @chan: DMA channel for the event | |
| * @state: DMA state to be handled | |
| */ | |
| static enum dma_state_client | |
| netdev_dma_event(struct dma_client *client, struct dma_chan *chan, | |
| enum dma_state state) | |
| { | |
| int i, found = 0, pos = -1; | |
| struct net_dma *net_dma = | |
| container_of(client, struct net_dma, client); | |
| enum dma_state_client ack = DMA_DUP; /* default: take no action */ | |
| spin_lock(&net_dma->lock); | |
| switch (state) { | |
| case DMA_RESOURCE_AVAILABLE: | |
| for (i = 0; i < NR_CPUS; i++) | |
| if (net_dma->channels[i] == chan) { | |
| found = 1; | |
| break; | |
| } else if (net_dma->channels[i] == NULL && pos < 0) | |
| pos = i; | |
| if (!found && pos >= 0) { | |
| ack = DMA_ACK; | |
| net_dma->channels[pos] = chan; | |
| cpu_set(pos, net_dma->channel_mask); | |
| net_dma_rebalance(net_dma); | |
| } | |
| break; | |
| case DMA_RESOURCE_REMOVED: | |
| for (i = 0; i < NR_CPUS; i++) | |
| if (net_dma->channels[i] == chan) { | |
| found = 1; | |
| pos = i; | |
| break; | |
| } | |
| if (found) { | |
| ack = DMA_ACK; | |
| cpu_clear(pos, net_dma->channel_mask); | |
| net_dma->channels[i] = NULL; | |
| net_dma_rebalance(net_dma); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| spin_unlock(&net_dma->lock); | |
| return ack; | |
| } | |
| /** | |
| * netdev_dma_regiser - register the networking subsystem as a DMA client | |
| */ | |
| static int __init netdev_dma_register(void) | |
| { | |
| spin_lock_init(&net_dma.lock); | |
| dma_cap_set(DMA_MEMCPY, net_dma.client.cap_mask); | |
| dma_async_client_register(&net_dma.client); | |
| dma_async_client_chan_request(&net_dma.client); | |
| return 0; | |
| } | |
| #else | |
| static int __init netdev_dma_register(void) { return -ENODEV; } | |
| #endif /* CONFIG_NET_DMA */ | |
| /** | |
| * netdev_compute_feature - compute conjunction of two feature sets | |
| * @all: first feature set | |
| * @one: second feature set | |
| * | |
| * Computes a new feature set after adding a device with feature set | |
| * @one to the master device with current feature set @all. Returns | |
| * the new feature set. | |
| */ | |
| int netdev_compute_features(unsigned long all, unsigned long one) | |
| { | |
| /* if device needs checksumming, downgrade to hw checksumming */ | |
| if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM)) | |
| all ^= NETIF_F_NO_CSUM | NETIF_F_HW_CSUM; | |
| /* if device can't do all checksum, downgrade to ipv4/ipv6 */ | |
| if (all & NETIF_F_HW_CSUM && !(one & NETIF_F_HW_CSUM)) | |
| all ^= NETIF_F_HW_CSUM | |
| | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; | |
| if (one & NETIF_F_GSO) | |
| one |= NETIF_F_GSO_SOFTWARE; | |
| one |= NETIF_F_GSO; | |
| /* If even one device supports robust GSO, enable it for all. */ | |
| if (one & NETIF_F_GSO_ROBUST) | |
| all |= NETIF_F_GSO_ROBUST; | |
| all &= one | NETIF_F_LLTX; | |
| if (!(all & NETIF_F_ALL_CSUM)) | |
| all &= ~NETIF_F_SG; | |
| if (!(all & NETIF_F_SG)) | |
| all &= ~NETIF_F_GSO_MASK; | |
| return all; | |
| } | |
| EXPORT_SYMBOL(netdev_compute_features); | |
| static struct hlist_head *netdev_create_hash(void) | |
| { | |
| int i; | |
| struct hlist_head *hash; | |
| hash = kmalloc(sizeof(*hash) * NETDEV_HASHENTRIES, GFP_KERNEL); | |
| if (hash != NULL) | |
| for (i = 0; i < NETDEV_HASHENTRIES; i++) | |
| INIT_HLIST_HEAD(&hash[i]); | |
| return hash; | |
| } | |
| /* Initialize per network namespace state */ | |
| static int __net_init netdev_init(struct net *net) | |
| { | |
| INIT_LIST_HEAD(&net->dev_base_head); | |
| rwlock_init(&dev_base_lock); | |
| net->dev_name_head = netdev_create_hash(); | |
| if (net->dev_name_head == NULL) | |
| goto err_name; | |
| net->dev_index_head = netdev_create_hash(); | |
| if (net->dev_index_head == NULL) | |
| goto err_idx; | |
| return 0; | |
| err_idx: | |
| kfree(net->dev_name_head); | |
| err_name: | |
| return -ENOMEM; | |
| } | |
| static void __net_exit netdev_exit(struct net *net) | |
| { | |
| kfree(net->dev_name_head); | |
| kfree(net->dev_index_head); | |
| } | |
| static struct pernet_operations __net_initdata netdev_net_ops = { | |
| .init = netdev_init, | |
| .exit = netdev_exit, | |
| }; | |
| static void __net_exit default_device_exit(struct net *net) | |
| { | |
| struct net_device *dev, *next; | |
| /* | |
| * Push all migratable of the network devices back to the | |
| * initial network namespace | |
| */ | |
| rtnl_lock(); | |
| for_each_netdev_safe(net, dev, next) { | |
| int err; | |
| /* Ignore unmoveable devices (i.e. loopback) */ | |
| if (dev->features & NETIF_F_NETNS_LOCAL) | |
| continue; | |
| /* Push remaing network devices to init_net */ | |
| err = dev_change_net_namespace(dev, &init_net, "dev%d"); | |
| if (err) { | |
| printk(KERN_WARNING "%s: failed to move %s to init_net: %d\n", | |
| __func__, dev->name, err); | |
| unregister_netdevice(dev); | |
| } | |
| } | |
| rtnl_unlock(); | |
| } | |
| static struct pernet_operations __net_initdata default_device_ops = { | |
| .exit = default_device_exit, | |
| }; | |
| /* | |
| * Initialize the DEV module. At boot time this walks the device list and | |
| * unhooks any devices that fail to initialise (normally hardware not | |
| * present) and leaves us with a valid list of present and active devices. | |
| * | |
| */ | |
| /* | |
| * This is called single threaded during boot, so no need | |
| * to take the rtnl semaphore. | |
| */ | |
| static int __init net_dev_init(void) | |
| { | |
| int i, rc = -ENOMEM; | |
| BUG_ON(!dev_boot_phase); | |
| if (dev_proc_init()) | |
| goto out; | |
| if (netdev_kobject_init()) | |
| goto out; | |
| INIT_LIST_HEAD(&ptype_all); | |
| for (i = 0; i < 16; i++) | |
| INIT_LIST_HEAD(&ptype_base[i]); | |
| if (register_pernet_subsys(&netdev_net_ops)) | |
| goto out; | |
| if (register_pernet_device(&default_device_ops)) | |
| goto out; | |
| /* | |
| * Initialise the packet receive queues. | |
| */ | |
| for_each_possible_cpu(i) { | |
| struct softnet_data *queue; | |
| queue = &per_cpu(softnet_data, i); | |
| skb_queue_head_init(&queue->input_pkt_queue); | |
| queue->completion_queue = NULL; | |
| INIT_LIST_HEAD(&queue->poll_list); | |
| queue->backlog.poll = process_backlog; | |
| queue->backlog.weight = weight_p; | |
| } | |
| netdev_dma_register(); | |
| dev_boot_phase = 0; | |
| open_softirq(NET_TX_SOFTIRQ, net_tx_action, NULL); | |
| open_softirq(NET_RX_SOFTIRQ, net_rx_action, NULL); | |
| hotcpu_notifier(dev_cpu_callback, 0); | |
| dst_init(); | |
| dev_mcast_init(); | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| subsys_initcall(net_dev_init); | |
| EXPORT_SYMBOL(__dev_get_by_index); | |
| EXPORT_SYMBOL(__dev_get_by_name); | |
| EXPORT_SYMBOL(__dev_remove_pack); | |
| EXPORT_SYMBOL(dev_valid_name); | |
| EXPORT_SYMBOL(dev_add_pack); | |
| EXPORT_SYMBOL(dev_alloc_name); | |
| EXPORT_SYMBOL(dev_close); | |
| EXPORT_SYMBOL(dev_get_by_flags); | |
| EXPORT_SYMBOL(dev_get_by_index); | |
| EXPORT_SYMBOL(dev_get_by_name); | |
| EXPORT_SYMBOL(dev_open); | |
| EXPORT_SYMBOL(dev_queue_xmit); | |
| EXPORT_SYMBOL(dev_remove_pack); | |
| EXPORT_SYMBOL(dev_set_allmulti); | |
| EXPORT_SYMBOL(dev_set_promiscuity); | |
| EXPORT_SYMBOL(dev_change_flags); | |
| EXPORT_SYMBOL(dev_set_mtu); | |
| EXPORT_SYMBOL(dev_set_mac_address); | |
| EXPORT_SYMBOL(free_netdev); | |
| EXPORT_SYMBOL(netdev_boot_setup_check); | |
| EXPORT_SYMBOL(netdev_set_master); | |
| EXPORT_SYMBOL(netdev_state_change); | |
| EXPORT_SYMBOL(netif_receive_skb); | |
| EXPORT_SYMBOL(netif_rx); | |
| EXPORT_SYMBOL(register_gifconf); | |
| EXPORT_SYMBOL(register_netdevice); | |
| EXPORT_SYMBOL(register_netdevice_notifier); | |
| EXPORT_SYMBOL(skb_checksum_help); | |
| EXPORT_SYMBOL(synchronize_net); | |
| EXPORT_SYMBOL(unregister_netdevice); | |
| EXPORT_SYMBOL(unregister_netdevice_notifier); | |
| EXPORT_SYMBOL(net_enable_timestamp); | |
| EXPORT_SYMBOL(net_disable_timestamp); | |
| EXPORT_SYMBOL(dev_get_flags); | |
| #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE) | |
| EXPORT_SYMBOL(br_handle_frame_hook); | |
| EXPORT_SYMBOL(br_fdb_get_hook); | |
| EXPORT_SYMBOL(br_fdb_put_hook); | |
| #endif | |
| #ifdef CONFIG_KMOD | |
| EXPORT_SYMBOL(dev_load); | |
| #endif | |
| EXPORT_PER_CPU_SYMBOL(softnet_data); |