| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| #include <linux/platform_device.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/gpio.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/printk.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| |
| #include "wlcore.h" |
| #include "wl12xx_80211.h" |
| #include "io.h" |
| |
| #ifndef SDIO_VENDOR_ID_TI |
| #define SDIO_VENDOR_ID_TI 0x0097 |
| #endif |
| |
| #ifndef SDIO_DEVICE_ID_TI_WL1271 |
| #define SDIO_DEVICE_ID_TI_WL1271 0x4076 |
| #endif |
| |
| static bool dump = false; |
| |
| struct wl12xx_sdio_glue { |
| struct device *dev; |
| struct platform_device *core; |
| }; |
| |
| static const struct sdio_device_id wl1271_devices[] = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(sdio, wl1271_devices); |
| |
| static void wl1271_sdio_set_block_size(struct device *child, |
| unsigned int blksz) |
| { |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| sdio_set_block_size(func, blksz); |
| sdio_release_host(func); |
| } |
| |
| static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr, |
| void *buf, size_t len, bool fixed) |
| { |
| int ret; |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { |
| ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); |
| dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n", |
| addr, ((u8 *)buf)[0]); |
| } else { |
| if (fixed) |
| ret = sdio_readsb(func, buf, addr, len); |
| else |
| ret = sdio_memcpy_fromio(func, buf, addr, len); |
| |
| dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n", |
| addr, len); |
| } |
| |
| sdio_release_host(func); |
| |
| if (WARN_ON(ret)) |
| dev_err(child->parent, "sdio read failed (%d)\n", ret); |
| |
| if (unlikely(dump)) { |
| printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr); |
| print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ", |
| DUMP_PREFIX_OFFSET, 16, 1, |
| buf, len, false); |
| } |
| |
| return ret; |
| } |
| |
| static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr, |
| void *buf, size_t len, bool fixed) |
| { |
| int ret; |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| |
| if (unlikely(dump)) { |
| printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr); |
| print_hex_dump(KERN_DEBUG, "wlcore_sdio: WRITE ", |
| DUMP_PREFIX_OFFSET, 16, 1, |
| buf, len, false); |
| } |
| |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { |
| sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); |
| dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n", |
| addr, ((u8 *)buf)[0]); |
| } else { |
| dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n", |
| addr, len); |
| |
| if (fixed) |
| ret = sdio_writesb(func, addr, buf, len); |
| else |
| ret = sdio_memcpy_toio(func, addr, buf, len); |
| } |
| |
| sdio_release_host(func); |
| |
| if (WARN_ON(ret)) |
| dev_err(child->parent, "sdio write failed (%d)\n", ret); |
| |
| return ret; |
| } |
| |
| static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) |
| { |
| int ret; |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| struct mmc_card *card = func->card; |
| |
| ret = pm_runtime_get_sync(&card->dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(&card->dev); |
| dev_err(glue->dev, "%s: failed to get_sync(%d)\n", |
| __func__, ret); |
| |
| return ret; |
| } |
| |
| sdio_claim_host(func); |
| sdio_enable_func(func); |
| sdio_release_host(func); |
| |
| return 0; |
| } |
| |
| static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) |
| { |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| struct mmc_card *card = func->card; |
| int error; |
| |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| |
| /* Let runtime PM know the card is powered off */ |
| error = pm_runtime_put(&card->dev); |
| if (error < 0 && error != -EBUSY) { |
| dev_err(&card->dev, "%s failed: %i\n", __func__, error); |
| |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int wl12xx_sdio_set_power(struct device *child, bool enable) |
| { |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| |
| if (enable) |
| return wl12xx_sdio_power_on(glue); |
| else |
| return wl12xx_sdio_power_off(glue); |
| } |
| |
| static struct wl1271_if_operations sdio_ops = { |
| .read = wl12xx_sdio_raw_read, |
| .write = wl12xx_sdio_raw_write, |
| .power = wl12xx_sdio_set_power, |
| .set_block_size = wl1271_sdio_set_block_size, |
| }; |
| |
| #ifdef CONFIG_OF |
| |
| static const struct wilink_family_data wl127x_data = { |
| .name = "wl127x", |
| .nvs_name = "ti-connectivity/wl127x-nvs.bin", |
| }; |
| |
| static const struct wilink_family_data wl128x_data = { |
| .name = "wl128x", |
| .nvs_name = "ti-connectivity/wl128x-nvs.bin", |
| }; |
| |
| static const struct wilink_family_data wl18xx_data = { |
| .name = "wl18xx", |
| .cfg_name = "ti-connectivity/wl18xx-conf.bin", |
| .nvs_name = "ti-connectivity/wl1271-nvs.bin", |
| }; |
| |
| static const struct of_device_id wlcore_sdio_of_match_table[] = { |
| { .compatible = "ti,wl1271", .data = &wl127x_data }, |
| { .compatible = "ti,wl1273", .data = &wl127x_data }, |
| { .compatible = "ti,wl1281", .data = &wl128x_data }, |
| { .compatible = "ti,wl1283", .data = &wl128x_data }, |
| { .compatible = "ti,wl1285", .data = &wl128x_data }, |
| { .compatible = "ti,wl1801", .data = &wl18xx_data }, |
| { .compatible = "ti,wl1805", .data = &wl18xx_data }, |
| { .compatible = "ti,wl1807", .data = &wl18xx_data }, |
| { .compatible = "ti,wl1831", .data = &wl18xx_data }, |
| { .compatible = "ti,wl1835", .data = &wl18xx_data }, |
| { .compatible = "ti,wl1837", .data = &wl18xx_data }, |
| { } |
| }; |
| |
| static int wlcore_probe_of(struct device *dev, int *irq, |
| struct wlcore_platdev_data *pdev_data) |
| { |
| struct device_node *np = dev->of_node; |
| const struct of_device_id *of_id; |
| |
| of_id = of_match_node(wlcore_sdio_of_match_table, np); |
| if (!of_id) |
| return -ENODEV; |
| |
| pdev_data->family = of_id->data; |
| |
| *irq = irq_of_parse_and_map(np, 0); |
| if (!*irq) { |
| dev_err(dev, "No irq in platform data\n"); |
| return -EINVAL; |
| } |
| |
| /* optional clock frequency params */ |
| of_property_read_u32(np, "ref-clock-frequency", |
| &pdev_data->ref_clock_freq); |
| of_property_read_u32(np, "tcxo-clock-frequency", |
| &pdev_data->tcxo_clock_freq); |
| |
| return 0; |
| } |
| #else |
| static int wlcore_probe_of(struct device *dev, int *irq, |
| struct wlcore_platdev_data *pdev_data) |
| { |
| return -ENODATA; |
| } |
| #endif |
| |
| static int wl1271_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct wlcore_platdev_data *pdev_data; |
| struct wl12xx_sdio_glue *glue; |
| struct resource res[1]; |
| mmc_pm_flag_t mmcflags; |
| int ret = -ENOMEM; |
| int irq; |
| const char *chip_family; |
| |
| /* We are only able to handle the wlan function */ |
| if (func->num != 0x02) |
| return -ENODEV; |
| |
| pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL); |
| if (!pdev_data) |
| return -ENOMEM; |
| |
| pdev_data->if_ops = &sdio_ops; |
| |
| glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL); |
| if (!glue) |
| return -ENOMEM; |
| |
| glue->dev = &func->dev; |
| |
| /* Grab access to FN0 for ELP reg. */ |
| func->card->quirks |= MMC_QUIRK_LENIENT_FN0; |
| |
| /* Use block mode for transferring over one block size of data */ |
| func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; |
| |
| ret = wlcore_probe_of(&func->dev, &irq, pdev_data); |
| if (ret) |
| goto out; |
| |
| /* if sdio can keep power while host is suspended, enable wow */ |
| mmcflags = sdio_get_host_pm_caps(func); |
| dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); |
| |
| if (mmcflags & MMC_PM_KEEP_POWER) |
| pdev_data->pwr_in_suspend = true; |
| |
| sdio_set_drvdata(func, glue); |
| |
| /* Tell PM core that we don't need the card to be powered now */ |
| pm_runtime_put_noidle(&func->dev); |
| |
| /* |
| * Due to a hardware bug, we can't differentiate wl18xx from |
| * wl12xx, because both report the same device ID. The only |
| * way to differentiate is by checking the SDIO revision, |
| * which is 3.00 on the wl18xx chips. |
| */ |
| if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00) |
| chip_family = "wl18xx"; |
| else |
| chip_family = "wl12xx"; |
| |
| glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); |
| if (!glue->core) { |
| dev_err(glue->dev, "can't allocate platform_device"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| glue->core->dev.parent = &func->dev; |
| |
| memset(res, 0x00, sizeof(res)); |
| |
| res[0].start = irq; |
| res[0].flags = IORESOURCE_IRQ | |
| irqd_get_trigger_type(irq_get_irq_data(irq)); |
| res[0].name = "irq"; |
| |
| ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); |
| if (ret) { |
| dev_err(glue->dev, "can't add resources\n"); |
| goto out_dev_put; |
| } |
| |
| ret = platform_device_add_data(glue->core, pdev_data, |
| sizeof(*pdev_data)); |
| if (ret) { |
| dev_err(glue->dev, "can't add platform data\n"); |
| goto out_dev_put; |
| } |
| |
| ret = platform_device_add(glue->core); |
| if (ret) { |
| dev_err(glue->dev, "can't add platform device\n"); |
| goto out_dev_put; |
| } |
| return 0; |
| |
| out_dev_put: |
| platform_device_put(glue->core); |
| |
| out: |
| return ret; |
| } |
| |
| static void wl1271_remove(struct sdio_func *func) |
| { |
| struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); |
| |
| /* Undo decrement done above in wl1271_probe */ |
| pm_runtime_get_noresume(&func->dev); |
| |
| platform_device_unregister(glue->core); |
| } |
| |
| #ifdef CONFIG_PM |
| static int wl1271_suspend(struct device *dev) |
| { |
| /* Tell MMC/SDIO core it's OK to power down the card |
| * (if it isn't already), but not to remove it completely */ |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); |
| struct wl1271 *wl = platform_get_drvdata(glue->core); |
| mmc_pm_flag_t sdio_flags; |
| int ret = 0; |
| |
| if (!wl) { |
| dev_err(dev, "no wilink module was probed\n"); |
| goto out; |
| } |
| |
| dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n", |
| wl->wow_enabled); |
| |
| /* check whether sdio should keep power */ |
| if (wl->wow_enabled) { |
| sdio_flags = sdio_get_host_pm_caps(func); |
| |
| if (!(sdio_flags & MMC_PM_KEEP_POWER)) { |
| dev_err(dev, "can't keep power while host " |
| "is suspended\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* keep power while host suspended */ |
| ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| if (ret) { |
| dev_err(dev, "error while trying to keep power\n"); |
| goto out; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| static int wl1271_resume(struct device *dev) |
| { |
| dev_dbg(dev, "wl1271 resume\n"); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops wl1271_sdio_pm_ops = { |
| .suspend = wl1271_suspend, |
| .resume = wl1271_resume, |
| }; |
| #endif |
| |
| static struct sdio_driver wl1271_sdio_driver = { |
| .name = "wl1271_sdio", |
| .id_table = wl1271_devices, |
| .probe = wl1271_probe, |
| .remove = wl1271_remove, |
| #ifdef CONFIG_PM |
| .drv = { |
| .pm = &wl1271_sdio_pm_ops, |
| }, |
| #endif |
| }; |
| |
| static int __init wl1271_init(void) |
| { |
| return sdio_register_driver(&wl1271_sdio_driver); |
| } |
| |
| static void __exit wl1271_exit(void) |
| { |
| sdio_unregister_driver(&wl1271_sdio_driver); |
| } |
| |
| module_init(wl1271_init); |
| module_exit(wl1271_exit); |
| |
| module_param(dump, bool, 0600); |
| MODULE_PARM_DESC(dump, "Enable sdio read/write dumps."); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |