| /* |
| This is part of rtl8180 OpenSource driver. |
| Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it> |
| Released under the terms of GPL (General Public Licence) |
| |
| Parts of this driver are based on the GPL part of the |
| official realtek driver |
| |
| Parts of this driver are based on the rtl8180 driver skeleton |
| from Patric Schenke & Andres Salomon |
| |
| Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver |
| |
| We want to tanks the Authors of those projects and the Ndiswrapper |
| project Authors. |
| */ |
| |
| #ifndef R8180H |
| #define R8180H |
| |
| |
| #define RTL8180_MODULE_NAME "r8180" |
| #define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a) |
| #define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a) |
| #define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a) |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| //#include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/netdevice.h> |
| #include <linux/pci.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| #include <linux/rtnetlink.h> //for rtnl_lock() |
| #include <linux/wireless.h> |
| #include <linux/timer.h> |
| #include <linux/proc_fs.h> // Necessary because we use the proc fs |
| #include <linux/if_arp.h> |
| #include "ieee80211/ieee80211.h" |
| #include <asm/io.h> |
| //#include <asm/semaphore.h> |
| |
| #define EPROM_93c46 0 |
| #define EPROM_93c56 1 |
| |
| #define RTL_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30 |
| |
| #define DEFAULT_FRAG_THRESHOLD 2342U |
| #define MIN_FRAG_THRESHOLD 256U |
| #define DEFAULT_RTS_THRESHOLD 2342U |
| #define MIN_RTS_THRESHOLD 0U |
| #define MAX_RTS_THRESHOLD 2342U |
| #define DEFAULT_BEACONINTERVAL 0x64U |
| |
| #define DEFAULT_RETRY_RTS 7 |
| #define DEFAULT_RETRY_DATA 7 |
| |
| #define BEACON_QUEUE 6 |
| |
| #define aSifsTime 10 |
| |
| #define sCrcLng 4 |
| #define sAckCtsLng 112 // bits in ACK and CTS frames |
| //+by amy 080312 |
| #define RATE_ADAPTIVE_TIMER_PERIOD 300 |
| |
| typedef enum _WIRELESS_MODE { |
| WIRELESS_MODE_UNKNOWN = 0x00, |
| WIRELESS_MODE_A = 0x01, |
| WIRELESS_MODE_B = 0x02, |
| WIRELESS_MODE_G = 0x04, |
| WIRELESS_MODE_AUTO = 0x08, |
| } WIRELESS_MODE; |
| |
| typedef struct ChnlAccessSetting { |
| u16 SIFS_Timer; |
| u16 DIFS_Timer; |
| u16 SlotTimeTimer; |
| u16 EIFS_Timer; |
| u16 CWminIndex; |
| u16 CWmaxIndex; |
| }*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING; |
| |
| typedef enum{ |
| NIC_8185 = 1, |
| NIC_8185B |
| } nic_t; |
| |
| typedef u32 AC_CODING; |
| #define AC0_BE 0 // ACI: 0x00 // Best Effort |
| #define AC1_BK 1 // ACI: 0x01 // Background |
| #define AC2_VI 2 // ACI: 0x10 // Video |
| #define AC3_VO 3 // ACI: 0x11 // Voice |
| #define AC_MAX 4 // Max: define total number; Should not to be used as a real enum. |
| |
| // |
| // ECWmin/ECWmax field. |
| // Ref: WMM spec 2.2.2: WME Parameter Element, p.13. |
| // |
| typedef union _ECW{ |
| u8 charData; |
| struct |
| { |
| u8 ECWmin:4; |
| u8 ECWmax:4; |
| }f; // Field |
| }ECW, *PECW; |
| |
| // |
| // ACI/AIFSN Field. |
| // Ref: WMM spec 2.2.2: WME Parameter Element, p.12. |
| // |
| typedef union _ACI_AIFSN{ |
| u8 charData; |
| |
| struct |
| { |
| u8 AIFSN:4; |
| u8 ACM:1; |
| u8 ACI:2; |
| u8 Reserved:1; |
| }f; // Field |
| }ACI_AIFSN, *PACI_AIFSN; |
| |
| // |
| // AC Parameters Record Format. |
| // Ref: WMM spec 2.2.2: WME Parameter Element, p.12. |
| // |
| typedef union _AC_PARAM{ |
| u32 longData; |
| u8 charData[4]; |
| |
| struct |
| { |
| ACI_AIFSN AciAifsn; |
| ECW Ecw; |
| u16 TXOPLimit; |
| }f; // Field |
| }AC_PARAM, *PAC_PARAM; |
| |
| /* it is a wrong definition. -xiong-2006-11-17 |
| typedef struct ThreeWireReg { |
| u16 longData; |
| struct { |
| u8 enableB; |
| u8 data; |
| u8 clk; |
| u8 read_write; |
| } struc; |
| } ThreeWireReg; |
| */ |
| |
| typedef union _ThreeWire{ |
| struct _ThreeWireStruc{ |
| u16 data:1; |
| u16 clk:1; |
| u16 enableB:1; |
| u16 read_write:1; |
| u16 resv1:12; |
| // u2Byte resv2:14; |
| // u2Byte ThreeWireEnable:1; |
| // u2Byte resv3:1; |
| }struc; |
| u16 longData; |
| }ThreeWireReg; |
| |
| |
| typedef struct buffer |
| { |
| struct buffer *next; |
| u32 *buf; |
| dma_addr_t dma; |
| } buffer; |
| |
| //YJ,modified,080828 |
| typedef struct Stats |
| { |
| unsigned long txrdu; |
| unsigned long rxrdu; |
| unsigned long rxnolast; |
| unsigned long rxnodata; |
| // unsigned long rxreset; |
| // unsigned long rxwrkaround; |
| unsigned long rxnopointer; |
| unsigned long txnperr; |
| unsigned long txresumed; |
| unsigned long rxerr; |
| unsigned long rxoverflow; |
| unsigned long rxint; |
| unsigned long txbkpokint; |
| unsigned long txbepoking; |
| unsigned long txbkperr; |
| unsigned long txbeperr; |
| unsigned long txnpokint; |
| unsigned long txhpokint; |
| unsigned long txhperr; |
| unsigned long ints; |
| unsigned long shints; |
| unsigned long txoverflow; |
| unsigned long rxdmafail; |
| unsigned long txbeacon; |
| unsigned long txbeaconerr; |
| unsigned long txlpokint; |
| unsigned long txlperr; |
| unsigned long txretry;//retry number tony 20060601 |
| unsigned long rxcrcerrmin;//crc error (0-500) |
| unsigned long rxcrcerrmid;//crc error (500-1000) |
| unsigned long rxcrcerrmax;//crc error (>1000) |
| unsigned long rxicverr;//ICV error |
| } Stats; |
| |
| #define MAX_LD_SLOT_NUM 10 |
| #define KEEP_ALIVE_INTERVAL 20 // in seconds. |
| #define CHECK_FOR_HANG_PERIOD 2 //be equal to watchdog check time |
| #define DEFAULT_KEEP_ALIVE_LEVEL 1 |
| #define DEFAULT_SLOT_NUM 2 |
| #define POWER_PROFILE_AC 0 |
| #define POWER_PROFILE_BATTERY 1 |
| |
| typedef struct _link_detect_t |
| { |
| u32 RxFrameNum[MAX_LD_SLOT_NUM]; // number of Rx Frame / CheckForHang_period to determine link status |
| u16 SlotNum; // number of CheckForHang period to determine link status, default is 2 |
| u16 SlotIndex; |
| |
| u32 NumTxOkInPeriod; //number of packet transmitted during CheckForHang |
| u32 NumRxOkInPeriod; //number of packet received during CheckForHang |
| |
| u8 IdleCount; // (KEEP_ALIVE_INTERVAL / CHECK_FOR_HANG_PERIOD) |
| u32 LastNumTxUnicast; |
| u32 LastNumRxUnicast; |
| |
| bool bBusyTraffic; //when it is set to 1, UI cann't scan at will. |
| }link_detect_t, *plink_detect_t; |
| |
| //YJ,modified,080828,end |
| |
| //by amy for led |
| //================================================================================ |
| // LED customization. |
| //================================================================================ |
| |
| typedef enum _LED_STRATEGY_8185{ |
| SW_LED_MODE0, // |
| SW_LED_MODE1, // |
| HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes) |
| }LED_STRATEGY_8185, *PLED_STRATEGY_8185; |
| //by amy for led |
| //by amy for power save |
| typedef enum _LED_CTL_MODE{ |
| LED_CTL_POWER_ON = 1, |
| LED_CTL_LINK = 2, |
| LED_CTL_NO_LINK = 3, |
| LED_CTL_TX = 4, |
| LED_CTL_RX = 5, |
| LED_CTL_SITE_SURVEY = 6, |
| LED_CTL_POWER_OFF = 7 |
| }LED_CTL_MODE; |
| |
| typedef enum _RT_RF_POWER_STATE |
| { |
| eRfOn, |
| eRfSleep, |
| eRfOff |
| }RT_RF_POWER_STATE; |
| |
| enum _ReasonCode{ |
| unspec_reason = 0x1, |
| auth_not_valid = 0x2, |
| deauth_lv_ss = 0x3, |
| inactivity = 0x4, |
| ap_overload = 0x5, |
| class2_err = 0x6, |
| class3_err = 0x7, |
| disas_lv_ss = 0x8, |
| asoc_not_auth = 0x9, |
| |
| //----MIC_CHECK |
| mic_failure = 0xe, |
| //----END MIC_CHECK |
| |
| // Reason code defined in 802.11i D10.0 p.28. |
| invalid_IE = 0x0d, |
| four_way_tmout = 0x0f, |
| two_way_tmout = 0x10, |
| IE_dismatch = 0x11, |
| invalid_Gcipher = 0x12, |
| invalid_Pcipher = 0x13, |
| invalid_AKMP = 0x14, |
| unsup_RSNIEver = 0x15, |
| invalid_RSNIE = 0x16, |
| auth_802_1x_fail= 0x17, |
| ciper_reject = 0x18, |
| |
| // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15. |
| QoS_unspec = 0x20, // 32 |
| QAP_bandwidth = 0x21, // 33 |
| poor_condition = 0x22, // 34 |
| no_facility = 0x23, // 35 |
| // Where is 36??? |
| req_declined = 0x25, // 37 |
| invalid_param = 0x26, // 38 |
| req_not_honored= 0x27, // 39 |
| TS_not_created = 0x2F, // 47 |
| DL_not_allowed = 0x30, // 48 |
| dest_not_exist = 0x31, // 49 |
| dest_not_QSTA = 0x32, // 50 |
| }; |
| typedef enum _RT_PS_MODE |
| { |
| eActive, // Active/Continuous access. |
| eMaxPs, // Max power save mode. |
| eFastPs // Fast power save mode. |
| }RT_PS_MODE; |
| //by amy for power save |
| typedef struct r8180_priv |
| { |
| struct pci_dev *pdev; |
| |
| short epromtype; |
| int irq; |
| struct ieee80211_device *ieee80211; |
| |
| short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */ |
| short enable_gpio0; |
| short hw_plcp_len; |
| short plcp_preamble_mode; // 0:auto 1:short 2:long |
| |
| spinlock_t irq_lock; |
| spinlock_t irq_th_lock; |
| spinlock_t tx_lock; |
| spinlock_t ps_lock; |
| spinlock_t rf_ps_lock; |
| |
| u16 irq_mask; |
| short irq_enabled; |
| struct net_device *dev; |
| short chan; |
| short sens; |
| short max_sens; |
| u8 chtxpwr[15]; //channels from 1 to 14, 0 not used |
| u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used |
| //u8 challow[15]; //channels from 1 to 14, 0 not used |
| u8 channel_plan; // it's the channel plan index |
| short up; |
| short crcmon; //if 1 allow bad crc frame reception in monitor mode |
| short prism_hdr; |
| |
| struct timer_list scan_timer; |
| /*short scanpending; |
| short stopscan;*/ |
| spinlock_t scan_lock; |
| u8 active_probe; |
| //u8 active_scan_num; |
| struct semaphore wx_sem; |
| struct semaphore rf_state; |
| short hw_wep; |
| |
| short digphy; |
| short antb; |
| short diversity; |
| u8 cs_treshold; |
| short rcr_csense; |
| u32 key0[4]; |
| short (*rf_set_sens)(struct net_device *dev,short sens); |
| void (*rf_set_chan)(struct net_device *dev,short ch); |
| void (*rf_close)(struct net_device *dev); |
| void (*rf_init)(struct net_device *dev); |
| void (*rf_sleep)(struct net_device *dev); |
| void (*rf_wakeup)(struct net_device *dev); |
| //short rate; |
| short promisc; |
| /*stats*/ |
| struct Stats stats; |
| struct _link_detect_t link_detect; //YJ,add,080828 |
| struct iw_statistics wstats; |
| struct proc_dir_entry *dir_dev; |
| |
| /*RX stuff*/ |
| u32 *rxring; |
| u32 *rxringtail; |
| dma_addr_t rxringdma; |
| struct buffer *rxbuffer; |
| struct buffer *rxbufferhead; |
| int rxringcount; |
| u16 rxbuffersize; |
| |
| struct sk_buff *rx_skb; |
| |
| short rx_skb_complete; |
| |
| u32 rx_prevlen; |
| |
| /*TX stuff*/ |
| /* |
| u32 *txlpring; |
| u32 *txhpring; |
| u32 *txnpring; |
| dma_addr_t txlpringdma; |
| dma_addr_t txhpringdma; |
| dma_addr_t txnpringdma; |
| u32 *txlpringtail; |
| u32 *txhpringtail; |
| u32 *txnpringtail; |
| u32 *txlpringhead; |
| u32 *txhpringhead; |
| u32 *txnpringhead; |
| struct buffer *txlpbufs; |
| struct buffer *txhpbufs; |
| struct buffer *txnpbufs; |
| struct buffer *txlpbufstail; |
| struct buffer *txhpbufstail; |
| struct buffer *txnpbufstail; |
| */ |
| u32 *txmapring; |
| u32 *txbkpring; |
| u32 *txbepring; |
| u32 *txvipring; |
| u32 *txvopring; |
| u32 *txhpring; |
| dma_addr_t txmapringdma; |
| dma_addr_t txbkpringdma; |
| dma_addr_t txbepringdma; |
| dma_addr_t txvipringdma; |
| dma_addr_t txvopringdma; |
| dma_addr_t txhpringdma; |
| u32 *txmapringtail; |
| u32 *txbkpringtail; |
| u32 *txbepringtail; |
| u32 *txvipringtail; |
| u32 *txvopringtail; |
| u32 *txhpringtail; |
| u32 *txmapringhead; |
| u32 *txbkpringhead; |
| u32 *txbepringhead; |
| u32 *txvipringhead; |
| u32 *txvopringhead; |
| u32 *txhpringhead; |
| struct buffer *txmapbufs; |
| struct buffer *txbkpbufs; |
| struct buffer *txbepbufs; |
| struct buffer *txvipbufs; |
| struct buffer *txvopbufs; |
| struct buffer *txhpbufs; |
| struct buffer *txmapbufstail; |
| struct buffer *txbkpbufstail; |
| struct buffer *txbepbufstail; |
| struct buffer *txvipbufstail; |
| struct buffer *txvopbufstail; |
| struct buffer *txhpbufstail; |
| |
| int txringcount; |
| int txbuffsize; |
| //struct tx_pendingbuf txnp_pending; |
| //struct tasklet_struct irq_tx_tasklet; |
| struct tasklet_struct irq_rx_tasklet; |
| u8 dma_poll_mask; |
| //short tx_suspend; |
| |
| /* adhoc/master mode stuff */ |
| u32 *txbeaconringtail; |
| dma_addr_t txbeaconringdma; |
| u32 *txbeaconring; |
| int txbeaconcount; |
| struct buffer *txbeaconbufs; |
| struct buffer *txbeaconbufstail; |
| //char *master_essid; |
| //u16 master_beaconinterval; |
| //u32 master_beaconsize; |
| //u16 beacon_interval; |
| |
| u8 retry_data; |
| u8 retry_rts; |
| u16 rts; |
| |
| //by amy for led |
| LED_STRATEGY_8185 LedStrategy; |
| //by amy for led |
| |
| //by amy for power save |
| struct timer_list watch_dog_timer; |
| bool bInactivePs; |
| bool bSwRfProcessing; |
| RT_RF_POWER_STATE eInactivePowerState; |
| RT_RF_POWER_STATE eRFPowerState; |
| u32 RfOffReason; |
| bool RFChangeInProgress; |
| bool bInHctTest; |
| bool SetRFPowerStateInProgress; |
| u8 RFProgType; |
| bool bLeisurePs; |
| RT_PS_MODE dot11PowerSaveMode; |
| //u32 NumRxOkInPeriod; //YJ,del,080828 |
| //u32 NumTxOkInPeriod; //YJ,del,080828 |
| u8 TxPollingTimes; |
| |
| bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake until receive data or timeout. |
| u8 WaitBufDataBcnCount; |
| u8 WaitBufDataTimeOut; |
| |
| //by amy for power save |
| //by amy for antenna |
| u8 EEPROMSwAntennaDiversity; |
| bool EEPROMDefaultAntenna1; |
| u8 RegSwAntennaDiversityMechanism; |
| bool bSwAntennaDiverity; |
| u8 RegDefaultAntenna; |
| bool bDefaultAntenna1; |
| u8 SignalStrength; |
| long Stats_SignalStrength; |
| long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average. |
| u8 SignalQuality; // in 0-100 index. |
| long Stats_SignalQuality; |
| long RecvSignalPower; // in dBm. |
| long Stats_RecvSignalPower; |
| u8 LastRxPktAntenna; // +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25. |
| u32 AdRxOkCnt; |
| long AdRxSignalStrength; |
| u8 CurrAntennaIndex; // Index to current Antenna (both Tx and Rx). |
| u8 AdTickCount; // Times of SwAntennaDiversityTimer happened. |
| u8 AdCheckPeriod; // # of period SwAntennaDiversityTimer to check Rx signal strength for SW Antenna Diversity. |
| u8 AdMinCheckPeriod; // Min value of AdCheckPeriod. |
| u8 AdMaxCheckPeriod; // Max value of AdCheckPeriod. |
| long AdRxSsThreshold; // Signal strength threshold to switch antenna. |
| long AdMaxRxSsThreshold; // Max value of AdRxSsThreshold. |
| bool bAdSwitchedChecking; // TRUE if we shall shall check Rx signal strength for last time switching antenna. |
| long AdRxSsBeforeSwitched; // Rx signal strength before we swithed antenna. |
| struct timer_list SwAntennaDiversityTimer; |
| //by amy for antenna |
| //{by amy 080312 |
| // |
| // Crystal calibration. |
| // Added by Roger, 2007.12.11. |
| // |
| bool bXtalCalibration; // Crystal calibration. |
| u8 XtalCal_Xin; // Crystal calibration for Xin. 0~7.5pF |
| u8 XtalCal_Xout; // Crystal calibration for Xout. 0~7.5pF |
| // |
| // Tx power tracking with thermal meter indication. |
| // Added by Roger, 2007.12.11. |
| // |
| bool bTxPowerTrack; // Tx Power tracking. |
| u8 ThermalMeter; // Thermal meter reference indication. |
| // |
| // Dynamic Initial Gain Adjustment Mechanism. Added by Bruce, 2007-02-14. |
| // |
| bool bDigMechanism; // TRUE if DIG is enabled, FALSE ow. |
| bool bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko. |
| u32 FalseAlarmRegValue; |
| u8 RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG. |
| u8 DIG_NumberFallbackVote; |
| u8 DIG_NumberUpgradeVote; |
| // For HW antenna diversity, added by Roger, 2008.01.30. |
| u32 AdMainAntennaRxOkCnt; // Main antenna Rx OK count. |
| u32 AdAuxAntennaRxOkCnt; // Aux antenna Rx OK count. |
| bool bHWAdSwitched; // TRUE if we has switched default antenna by HW evaluation. |
| // RF High Power upper/lower threshold. |
| u8 RegHiPwrUpperTh; |
| u8 RegHiPwrLowerTh; |
| // RF RSSI High Power upper/lower Threshold. |
| u8 RegRSSIHiPwrUpperTh; |
| u8 RegRSSIHiPwrLowerTh; |
| // Current CCK RSSI value to determine CCK high power, asked by SD3 DZ, by Bruce, 2007-04-12. |
| u8 CurCCKRSSI; |
| bool bCurCCKPkt; |
| // |
| // High Power Mechanism. Added by amy, 080312. |
| // |
| bool bToUpdateTxPwr; |
| long UndecoratedSmoothedSS; |
| long UndercorateSmoothedRxPower; |
| u8 RSSI; |
| char RxPower; |
| u8 InitialGain; |
| //For adjust Dig Threshold during Legacy/Leisure Power Save Mode |
| u32 DozePeriodInPast2Sec; |
| // Don't access BB/RF under disable PLL situation. |
| u8 InitialGainBackUp; |
| u8 RegBModeGainStage; |
| //by amy for rate adaptive |
| struct timer_list rateadapter_timer; |
| u32 RateAdaptivePeriod; |
| bool bEnhanceTxPwr; |
| bool bUpdateARFR; |
| int ForcedDataRate; // Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M.) |
| u32 NumTxUnicast; //YJ,add,080828,for keep alive |
| u8 keepAliveLevel; //YJ,add,080828,for KeepAlive |
| unsigned long NumTxOkTotal; |
| u16 LastRetryCnt; |
| u16 LastRetryRate; |
| unsigned long LastTxokCnt; |
| unsigned long LastRxokCnt; |
| u16 CurrRetryCnt; |
| unsigned long LastTxOKBytes; |
| unsigned long NumTxOkBytesTotal; |
| u8 LastFailTxRate; |
| long LastFailTxRateSS; |
| u8 FailTxRateCount; |
| u32 LastTxThroughput; |
| //for up rate |
| unsigned short bTryuping; |
| u8 CurrTxRate; //the rate before up |
| u16 CurrRetryRate; |
| u16 TryupingCount; |
| u8 TryDownCountLowData; |
| u8 TryupingCountNoData; |
| |
| u8 CurrentOperaRate; |
| //by amy for rate adaptive |
| //by amy 080312} |
| // short wq_hurryup; |
| // struct workqueue_struct *workqueue; |
| struct work_struct reset_wq; |
| struct work_struct watch_dog_wq; |
| struct work_struct tx_irq_wq; |
| short ack_tx_to_ieee; |
| |
| u8 PowerProfile; |
| u32 CSMethod; |
| u8 cck_txpwr_base; |
| u8 ofdm_txpwr_base; |
| u8 dma_poll_stop_mask; |
| |
| //u8 RegThreeWireMode; |
| u8 MWIEnable; |
| u16 ShortRetryLimit; |
| u16 LongRetryLimit; |
| u16 EarlyRxThreshold; |
| u32 TransmitConfig; |
| u32 ReceiveConfig; |
| u32 IntrMask; |
| |
| struct ChnlAccessSetting ChannelAccessSetting; |
| }r8180_priv; |
| |
| #define MANAGE_PRIORITY 0 |
| #define BK_PRIORITY 1 |
| #define BE_PRIORITY 2 |
| #define VI_PRIORITY 3 |
| #define VO_PRIORITY 4 |
| #define HI_PRIORITY 5 |
| #define BEACON_PRIORITY 6 |
| |
| #define LOW_PRIORITY VI_PRIORITY |
| #define NORM_PRIORITY VO_PRIORITY |
| //AC2Queue mapping |
| #define AC2Q(_ac) (((_ac) == WME_AC_VO) ? VO_PRIORITY : \ |
| ((_ac) == WME_AC_VI) ? VI_PRIORITY : \ |
| ((_ac) == WME_AC_BK) ? BK_PRIORITY : \ |
| BE_PRIORITY) |
| |
| short rtl8180_tx(struct net_device *dev,u8* skbuf, int len,int priority, |
| short morefrag,short fragdesc,int rate); |
| |
| u8 read_nic_byte(struct net_device *dev, int x); |
| u32 read_nic_dword(struct net_device *dev, int x); |
| u16 read_nic_word(struct net_device *dev, int x) ; |
| void write_nic_byte(struct net_device *dev, int x,u8 y); |
| void write_nic_word(struct net_device *dev, int x,u16 y); |
| void write_nic_dword(struct net_device *dev, int x,u32 y); |
| void force_pci_posting(struct net_device *dev); |
| |
| void rtl8180_rtx_disable(struct net_device *); |
| void rtl8180_rx_enable(struct net_device *); |
| void rtl8180_tx_enable(struct net_device *); |
| void rtl8180_start_scanning(struct net_device *dev); |
| void rtl8180_start_scanning_s(struct net_device *dev); |
| void rtl8180_stop_scanning(struct net_device *dev); |
| void rtl8180_disassociate(struct net_device *dev); |
| //void fix_rx_fifo(struct net_device *dev); |
| void rtl8180_set_anaparam(struct net_device *dev,u32 a); |
| void rtl8185_set_anaparam2(struct net_device *dev,u32 a); |
| void rtl8180_set_hw_wep(struct net_device *dev); |
| void rtl8180_no_hw_wep(struct net_device *dev); |
| void rtl8180_update_msr(struct net_device *dev); |
| //void rtl8180_BSS_create(struct net_device *dev); |
| void rtl8180_beacon_tx_disable(struct net_device *dev); |
| void rtl8180_beacon_rx_disable(struct net_device *dev); |
| void rtl8180_conttx_enable(struct net_device *dev); |
| void rtl8180_conttx_disable(struct net_device *dev); |
| int rtl8180_down(struct net_device *dev); |
| int rtl8180_up(struct net_device *dev); |
| void rtl8180_commit(struct net_device *dev); |
| void rtl8180_set_chan(struct net_device *dev,short ch); |
| void rtl8180_set_master_essid(struct net_device *dev,char *essid); |
| void rtl8180_update_beacon_security(struct net_device *dev); |
| void write_phy(struct net_device *dev, u8 adr, u8 data); |
| void write_phy_cck(struct net_device *dev, u8 adr, u32 data); |
| void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data); |
| void rtl8185_tx_antenna(struct net_device *dev, u8 ant); |
| void rtl8185_rf_pins_enable(struct net_device *dev); |
| void IBSS_randomize_cell(struct net_device *dev); |
| void IPSEnter(struct net_device *dev); |
| void IPSLeave(struct net_device *dev); |
| int get_curr_tx_free_desc(struct net_device *dev, int priority); |
| void UpdateInitialGain(struct net_device *dev); |
| bool SetAntennaConfig87SE(struct net_device *dev, u8 DefaultAnt, bool bAntDiversity); |
| |
| //#ifdef CONFIG_RTL8185B |
| void rtl8185b_adapter_start(struct net_device *dev); |
| void rtl8185b_rx_enable(struct net_device *dev); |
| void rtl8185b_tx_enable(struct net_device *dev); |
| void rtl8180_reset(struct net_device *dev); |
| void rtl8185b_irq_enable(struct net_device *dev); |
| void fix_rx_fifo(struct net_device *dev); |
| void fix_tx_fifo(struct net_device *dev); |
| void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch); |
| void rtl8180_rate_adapter(struct work_struct * work); |
| //#endif |
| bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource); |
| |
| #endif |
