| /* | |
| * i8253.c 8253/PIT functions | |
| * | |
| */ | |
| #include <linux/clockchips.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/module.h> | |
| #include <linux/smp.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/irq.h> | |
| #include <asm/delay.h> | |
| #include <asm/i8253.h> | |
| #include <asm/io.h> | |
| #include <asm/time.h> | |
| DEFINE_RAW_SPINLOCK(i8253_lock); | |
| EXPORT_SYMBOL(i8253_lock); | |
| /* | |
| * Initialize the PIT timer. | |
| * | |
| * This is also called after resume to bring the PIT into operation again. | |
| */ | |
| static void init_pit_timer(enum clock_event_mode mode, | |
| struct clock_event_device *evt) | |
| { | |
| raw_spin_lock(&i8253_lock); | |
| switch(mode) { | |
| case CLOCK_EVT_MODE_PERIODIC: | |
| /* binary, mode 2, LSB/MSB, ch 0 */ | |
| outb_p(0x34, PIT_MODE); | |
| outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ | |
| outb(LATCH >> 8 , PIT_CH0); /* MSB */ | |
| break; | |
| case CLOCK_EVT_MODE_SHUTDOWN: | |
| case CLOCK_EVT_MODE_UNUSED: | |
| if (evt->mode == CLOCK_EVT_MODE_PERIODIC || | |
| evt->mode == CLOCK_EVT_MODE_ONESHOT) { | |
| outb_p(0x30, PIT_MODE); | |
| outb_p(0, PIT_CH0); | |
| outb_p(0, PIT_CH0); | |
| } | |
| break; | |
| case CLOCK_EVT_MODE_ONESHOT: | |
| /* One shot setup */ | |
| outb_p(0x38, PIT_MODE); | |
| break; | |
| case CLOCK_EVT_MODE_RESUME: | |
| /* Nothing to do here */ | |
| break; | |
| } | |
| raw_spin_unlock(&i8253_lock); | |
| } | |
| /* | |
| * Program the next event in oneshot mode | |
| * | |
| * Delta is given in PIT ticks | |
| */ | |
| static int pit_next_event(unsigned long delta, struct clock_event_device *evt) | |
| { | |
| raw_spin_lock(&i8253_lock); | |
| outb_p(delta & 0xff , PIT_CH0); /* LSB */ | |
| outb(delta >> 8 , PIT_CH0); /* MSB */ | |
| raw_spin_unlock(&i8253_lock); | |
| return 0; | |
| } | |
| /* | |
| * On UP the PIT can serve all of the possible timer functions. On SMP systems | |
| * it can be solely used for the global tick. | |
| * | |
| * The profiling and update capabilites are switched off once the local apic is | |
| * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - | |
| * !using_apic_timer decisions in do_timer_interrupt_hook() | |
| */ | |
| static struct clock_event_device pit_clockevent = { | |
| .name = "pit", | |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, | |
| .set_mode = init_pit_timer, | |
| .set_next_event = pit_next_event, | |
| .irq = 0, | |
| }; | |
| static irqreturn_t timer_interrupt(int irq, void *dev_id) | |
| { | |
| pit_clockevent.event_handler(&pit_clockevent); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction irq0 = { | |
| .handler = timer_interrupt, | |
| .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, | |
| .name = "timer" | |
| }; | |
| /* | |
| * Initialize the conversion factor and the min/max deltas of the clock event | |
| * structure and register the clock event source with the framework. | |
| */ | |
| void __init setup_pit_timer(void) | |
| { | |
| struct clock_event_device *cd = &pit_clockevent; | |
| unsigned int cpu = smp_processor_id(); | |
| /* | |
| * Start pit with the boot cpu mask and make it global after the | |
| * IO_APIC has been initialized. | |
| */ | |
| cd->cpumask = cpumask_of(cpu); | |
| clockevent_set_clock(cd, CLOCK_TICK_RATE); | |
| cd->max_delta_ns = clockevent_delta2ns(0x7FFF, cd); | |
| cd->min_delta_ns = clockevent_delta2ns(0xF, cd); | |
| clockevents_register_device(cd); | |
| setup_irq(0, &irq0); | |
| } | |
| static int __init init_pit_clocksource(void) | |
| { | |
| if (num_possible_cpus() > 1) /* PIT does not scale! */ | |
| return 0; | |
| return clocksource_i8253_init(); | |
| } | |
| arch_initcall(init_pit_clocksource); |