| /* | 
 |  * drivers/net/phy/national.c | 
 |  * | 
 |  * Driver for National Semiconductor PHYs | 
 |  * | 
 |  * Author: Stuart Menefy <stuart.menefy@st.com> | 
 |  * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> | 
 |  * | 
 |  * Copyright (c) 2008 STMicroelectronics Limited | 
 |  * | 
 |  * This program is free software; you can redistribute  it and/or modify it | 
 |  * under  the terms of  the GNU General  Public License as published by the | 
 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  * option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/phy.h> | 
 | #include <linux/netdevice.h> | 
 |  | 
 | /* DP83865 phy identifier values */ | 
 | #define DP83865_PHY_ID	0x20005c7a | 
 |  | 
 | #define DP83865_INT_MASK_REG 0x15 | 
 | #define DP83865_INT_MASK_STATUS 0x14 | 
 |  | 
 | #define DP83865_INT_REMOTE_FAULT 0x0008 | 
 | #define DP83865_INT_ANE_COMPLETED 0x0010 | 
 | #define DP83865_INT_LINK_CHANGE	0xe000 | 
 | #define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ | 
 | 				DP83865_INT_ANE_COMPLETED | \ | 
 | 				DP83865_INT_LINK_CHANGE) | 
 |  | 
 | /* Advanced proprietary configuration */ | 
 | #define NS_EXP_MEM_CTL	0x16 | 
 | #define NS_EXP_MEM_DATA	0x1d | 
 | #define NS_EXP_MEM_ADD	0x1e | 
 |  | 
 | #define LED_CTRL_REG 0x13 | 
 | #define AN_FALLBACK_AN 0x0001 | 
 | #define AN_FALLBACK_CRC 0x0002 | 
 | #define AN_FALLBACK_IE 0x0004 | 
 | #define ALL_FALLBACK_ON (AN_FALLBACK_AN |  AN_FALLBACK_CRC | AN_FALLBACK_IE) | 
 |  | 
 | enum hdx_loopback { | 
 | 	hdx_loopback_on = 0, | 
 | 	hdx_loopback_off = 1, | 
 | }; | 
 |  | 
 | static u8 ns_exp_read(struct phy_device *phydev, u16 reg) | 
 | { | 
 | 	phy_write(phydev, NS_EXP_MEM_ADD, reg); | 
 | 	return phy_read(phydev, NS_EXP_MEM_DATA); | 
 | } | 
 |  | 
 | static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) | 
 | { | 
 | 	phy_write(phydev, NS_EXP_MEM_ADD, reg); | 
 | 	phy_write(phydev, NS_EXP_MEM_DATA, data); | 
 | } | 
 |  | 
 | static int ns_config_intr(struct phy_device *phydev) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) | 
 | 		err = phy_write(phydev, DP83865_INT_MASK_REG, | 
 | 				DP83865_INT_MASK_DEFAULT); | 
 | 	else | 
 | 		err = phy_write(phydev, DP83865_INT_MASK_REG, 0); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ns_ack_interrupt(struct phy_device *phydev) | 
 | { | 
 | 	int ret = phy_read(phydev, DP83865_INT_MASK_STATUS); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) | 
 | { | 
 | 	int bmcr = phy_read(phydev, MII_BMCR); | 
 |  | 
 | 	phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); | 
 |  | 
 | 	/* Enable 8 bit expended memory read/write (no auto increment) */ | 
 | 	phy_write(phydev, NS_EXP_MEM_CTL, 0); | 
 | 	phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); | 
 | 	phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); | 
 | 	phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); | 
 | 	phy_write(phydev, LED_CTRL_REG, mode); | 
 | } | 
 |  | 
 | static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) | 
 | { | 
 | 	if (disable) | 
 | 		ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1); | 
 | 	else | 
 | 		ns_exp_write(phydev, 0x1c0, | 
 | 			     ns_exp_read(phydev, 0x1c0) & 0xfffe); | 
 |  | 
 | 	printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n", | 
 | 	       (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on"); | 
 | } | 
 |  | 
 | static int ns_config_init(struct phy_device *phydev) | 
 | { | 
 | 	ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); | 
 | 	/* In the latest MAC or switches design, the 10 Mbps loopback | 
 | 	   is desired to be turned off. */ | 
 | 	ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); | 
 | 	return ns_ack_interrupt(phydev); | 
 | } | 
 |  | 
 | static struct phy_driver dp83865_driver = { | 
 | 	.phy_id = DP83865_PHY_ID, | 
 | 	.phy_id_mask = 0xfffffff0, | 
 | 	.name = "NatSemi DP83865", | 
 | 	.features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, | 
 | 	.flags = PHY_HAS_INTERRUPT, | 
 | 	.config_init = ns_config_init, | 
 | 	.config_aneg = genphy_config_aneg, | 
 | 	.read_status = genphy_read_status, | 
 | 	.ack_interrupt = ns_ack_interrupt, | 
 | 	.config_intr = ns_config_intr, | 
 | 	.driver = {.owner = THIS_MODULE,} | 
 | }; | 
 |  | 
 | static int __init ns_init(void) | 
 | { | 
 | 	return phy_driver_register(&dp83865_driver); | 
 | } | 
 |  | 
 | static void __exit ns_exit(void) | 
 | { | 
 | 	phy_driver_unregister(&dp83865_driver); | 
 | } | 
 |  | 
 | MODULE_DESCRIPTION("NatSemi PHY driver"); | 
 | MODULE_AUTHOR("Stuart Menefy"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_init(ns_init); | 
 | module_exit(ns_exit); | 
 |  | 
 | static struct mdio_device_id ns_tbl[] = { | 
 | 	{ DP83865_PHY_ID, 0xfffffff0 }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(mdio, ns_tbl); |