| /* drivers/rtc/rtc-v3020.c | |
| * | |
| * Copyright (C) 2006 8D Technologies inc. | |
| * Copyright (C) 2004 Compulab Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Driver for the V3020 RTC | |
| * | |
| * Changelog: | |
| * | |
| * 10-May-2006: Raphael Assenat <raph@8d.com> | |
| * - Converted to platform driver | |
| * - Use the generic rtc class | |
| * | |
| * ??-???-2004: Someone at Compulab | |
| * - Initial driver creation. | |
| * | |
| */ | |
| #include <linux/platform_device.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/rtc.h> | |
| #include <linux/types.h> | |
| #include <linux/bcd.h> | |
| #include <linux/rtc-v3020.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio.h> | |
| #include <linux/io.h> | |
| #undef DEBUG | |
| struct v3020; | |
| struct v3020_chip_ops { | |
| int (*map_io)(struct v3020 *chip, struct platform_device *pdev, | |
| struct v3020_platform_data *pdata); | |
| void (*unmap_io)(struct v3020 *chip); | |
| unsigned char (*read_bit)(struct v3020 *chip); | |
| void (*write_bit)(struct v3020 *chip, unsigned char bit); | |
| }; | |
| #define V3020_CS 0 | |
| #define V3020_WR 1 | |
| #define V3020_RD 2 | |
| #define V3020_IO 3 | |
| struct v3020_gpio { | |
| const char *name; | |
| unsigned int gpio; | |
| }; | |
| struct v3020 { | |
| /* MMIO access */ | |
| void __iomem *ioaddress; | |
| int leftshift; | |
| /* GPIO access */ | |
| struct v3020_gpio *gpio; | |
| struct v3020_chip_ops *ops; | |
| struct rtc_device *rtc; | |
| }; | |
| static int v3020_mmio_map(struct v3020 *chip, struct platform_device *pdev, | |
| struct v3020_platform_data *pdata) | |
| { | |
| if (pdev->num_resources != 1) | |
| return -EBUSY; | |
| if (pdev->resource[0].flags != IORESOURCE_MEM) | |
| return -EBUSY; | |
| chip->leftshift = pdata->leftshift; | |
| chip->ioaddress = ioremap(pdev->resource[0].start, 1); | |
| if (chip->ioaddress == NULL) | |
| return -EBUSY; | |
| return 0; | |
| } | |
| static void v3020_mmio_unmap(struct v3020 *chip) | |
| { | |
| iounmap(chip->ioaddress); | |
| } | |
| static void v3020_mmio_write_bit(struct v3020 *chip, unsigned char bit) | |
| { | |
| writel(bit << chip->leftshift, chip->ioaddress); | |
| } | |
| static unsigned char v3020_mmio_read_bit(struct v3020 *chip) | |
| { | |
| return readl(chip->ioaddress) & (1 << chip->leftshift); | |
| } | |
| static struct v3020_chip_ops v3020_mmio_ops = { | |
| .map_io = v3020_mmio_map, | |
| .unmap_io = v3020_mmio_unmap, | |
| .read_bit = v3020_mmio_read_bit, | |
| .write_bit = v3020_mmio_write_bit, | |
| }; | |
| static struct v3020_gpio v3020_gpio[] = { | |
| { "RTC CS", 0 }, | |
| { "RTC WR", 0 }, | |
| { "RTC RD", 0 }, | |
| { "RTC IO", 0 }, | |
| }; | |
| static int v3020_gpio_map(struct v3020 *chip, struct platform_device *pdev, | |
| struct v3020_platform_data *pdata) | |
| { | |
| int i, err; | |
| v3020_gpio[V3020_CS].gpio = pdata->gpio_cs; | |
| v3020_gpio[V3020_WR].gpio = pdata->gpio_wr; | |
| v3020_gpio[V3020_RD].gpio = pdata->gpio_rd; | |
| v3020_gpio[V3020_IO].gpio = pdata->gpio_io; | |
| for (i = 0; i < ARRAY_SIZE(v3020_gpio); i++) { | |
| err = gpio_request(v3020_gpio[i].gpio, v3020_gpio[i].name); | |
| if (err) | |
| goto err_request; | |
| gpio_direction_output(v3020_gpio[i].gpio, 1); | |
| } | |
| chip->gpio = v3020_gpio; | |
| return 0; | |
| err_request: | |
| while (--i >= 0) | |
| gpio_free(v3020_gpio[i].gpio); | |
| return err; | |
| } | |
| static void v3020_gpio_unmap(struct v3020 *chip) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(v3020_gpio); i++) | |
| gpio_free(v3020_gpio[i].gpio); | |
| } | |
| static void v3020_gpio_write_bit(struct v3020 *chip, unsigned char bit) | |
| { | |
| gpio_direction_output(chip->gpio[V3020_IO].gpio, bit); | |
| gpio_set_value(chip->gpio[V3020_CS].gpio, 0); | |
| gpio_set_value(chip->gpio[V3020_WR].gpio, 0); | |
| udelay(1); | |
| gpio_set_value(chip->gpio[V3020_WR].gpio, 1); | |
| gpio_set_value(chip->gpio[V3020_CS].gpio, 1); | |
| } | |
| static unsigned char v3020_gpio_read_bit(struct v3020 *chip) | |
| { | |
| int bit; | |
| gpio_direction_input(chip->gpio[V3020_IO].gpio); | |
| gpio_set_value(chip->gpio[V3020_CS].gpio, 0); | |
| gpio_set_value(chip->gpio[V3020_RD].gpio, 0); | |
| udelay(1); | |
| bit = !!gpio_get_value(chip->gpio[V3020_IO].gpio); | |
| udelay(1); | |
| gpio_set_value(chip->gpio[V3020_RD].gpio, 1); | |
| gpio_set_value(chip->gpio[V3020_CS].gpio, 1); | |
| return bit; | |
| } | |
| static struct v3020_chip_ops v3020_gpio_ops = { | |
| .map_io = v3020_gpio_map, | |
| .unmap_io = v3020_gpio_unmap, | |
| .read_bit = v3020_gpio_read_bit, | |
| .write_bit = v3020_gpio_write_bit, | |
| }; | |
| static void v3020_set_reg(struct v3020 *chip, unsigned char address, | |
| unsigned char data) | |
| { | |
| int i; | |
| unsigned char tmp; | |
| tmp = address; | |
| for (i = 0; i < 4; i++) { | |
| chip->ops->write_bit(chip, (tmp & 1)); | |
| tmp >>= 1; | |
| udelay(1); | |
| } | |
| /* Commands dont have data */ | |
| if (!V3020_IS_COMMAND(address)) { | |
| for (i = 0; i < 8; i++) { | |
| chip->ops->write_bit(chip, (data & 1)); | |
| data >>= 1; | |
| udelay(1); | |
| } | |
| } | |
| } | |
| static unsigned char v3020_get_reg(struct v3020 *chip, unsigned char address) | |
| { | |
| unsigned int data = 0; | |
| int i; | |
| for (i = 0; i < 4; i++) { | |
| chip->ops->write_bit(chip, (address & 1)); | |
| address >>= 1; | |
| udelay(1); | |
| } | |
| for (i = 0; i < 8; i++) { | |
| data >>= 1; | |
| if (chip->ops->read_bit(chip)) | |
| data |= 0x80; | |
| udelay(1); | |
| } | |
| return data; | |
| } | |
| static int v3020_read_time(struct device *dev, struct rtc_time *dt) | |
| { | |
| struct v3020 *chip = dev_get_drvdata(dev); | |
| int tmp; | |
| /* Copy the current time to ram... */ | |
| v3020_set_reg(chip, V3020_CMD_CLOCK2RAM, 0); | |
| /* ...and then read constant values. */ | |
| tmp = v3020_get_reg(chip, V3020_SECONDS); | |
| dt->tm_sec = bcd2bin(tmp); | |
| tmp = v3020_get_reg(chip, V3020_MINUTES); | |
| dt->tm_min = bcd2bin(tmp); | |
| tmp = v3020_get_reg(chip, V3020_HOURS); | |
| dt->tm_hour = bcd2bin(tmp); | |
| tmp = v3020_get_reg(chip, V3020_MONTH_DAY); | |
| dt->tm_mday = bcd2bin(tmp); | |
| tmp = v3020_get_reg(chip, V3020_MONTH); | |
| dt->tm_mon = bcd2bin(tmp) - 1; | |
| tmp = v3020_get_reg(chip, V3020_WEEK_DAY); | |
| dt->tm_wday = bcd2bin(tmp); | |
| tmp = v3020_get_reg(chip, V3020_YEAR); | |
| dt->tm_year = bcd2bin(tmp)+100; | |
| dev_dbg(dev, "\n%s : Read RTC values\n", __func__); | |
| dev_dbg(dev, "tm_hour: %i\n", dt->tm_hour); | |
| dev_dbg(dev, "tm_min : %i\n", dt->tm_min); | |
| dev_dbg(dev, "tm_sec : %i\n", dt->tm_sec); | |
| dev_dbg(dev, "tm_year: %i\n", dt->tm_year); | |
| dev_dbg(dev, "tm_mon : %i\n", dt->tm_mon); | |
| dev_dbg(dev, "tm_mday: %i\n", dt->tm_mday); | |
| dev_dbg(dev, "tm_wday: %i\n", dt->tm_wday); | |
| return 0; | |
| } | |
| static int v3020_set_time(struct device *dev, struct rtc_time *dt) | |
| { | |
| struct v3020 *chip = dev_get_drvdata(dev); | |
| dev_dbg(dev, "\n%s : Setting RTC values\n", __func__); | |
| dev_dbg(dev, "tm_sec : %i\n", dt->tm_sec); | |
| dev_dbg(dev, "tm_min : %i\n", dt->tm_min); | |
| dev_dbg(dev, "tm_hour: %i\n", dt->tm_hour); | |
| dev_dbg(dev, "tm_mday: %i\n", dt->tm_mday); | |
| dev_dbg(dev, "tm_wday: %i\n", dt->tm_wday); | |
| dev_dbg(dev, "tm_year: %i\n", dt->tm_year); | |
| /* Write all the values to ram... */ | |
| v3020_set_reg(chip, V3020_SECONDS, bin2bcd(dt->tm_sec)); | |
| v3020_set_reg(chip, V3020_MINUTES, bin2bcd(dt->tm_min)); | |
| v3020_set_reg(chip, V3020_HOURS, bin2bcd(dt->tm_hour)); | |
| v3020_set_reg(chip, V3020_MONTH_DAY, bin2bcd(dt->tm_mday)); | |
| v3020_set_reg(chip, V3020_MONTH, bin2bcd(dt->tm_mon + 1)); | |
| v3020_set_reg(chip, V3020_WEEK_DAY, bin2bcd(dt->tm_wday)); | |
| v3020_set_reg(chip, V3020_YEAR, bin2bcd(dt->tm_year % 100)); | |
| /* ...and set the clock. */ | |
| v3020_set_reg(chip, V3020_CMD_RAM2CLOCK, 0); | |
| /* Compulab used this delay here. I dont know why, | |
| * the datasheet does not specify a delay. */ | |
| /*mdelay(5);*/ | |
| return 0; | |
| } | |
| static const struct rtc_class_ops v3020_rtc_ops = { | |
| .read_time = v3020_read_time, | |
| .set_time = v3020_set_time, | |
| }; | |
| static int rtc_probe(struct platform_device *pdev) | |
| { | |
| struct v3020_platform_data *pdata = pdev->dev.platform_data; | |
| struct v3020 *chip; | |
| struct rtc_device *rtc; | |
| int retval = -EBUSY; | |
| int i; | |
| int temp; | |
| chip = kzalloc(sizeof *chip, GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| if (pdata->use_gpio) | |
| chip->ops = &v3020_gpio_ops; | |
| else | |
| chip->ops = &v3020_mmio_ops; | |
| retval = chip->ops->map_io(chip, pdev, pdata); | |
| if (retval) | |
| goto err_chip; | |
| /* Make sure the v3020 expects a communication cycle | |
| * by reading 8 times */ | |
| for (i = 0; i < 8; i++) | |
| temp = chip->ops->read_bit(chip); | |
| /* Test chip by doing a write/read sequence | |
| * to the chip ram */ | |
| v3020_set_reg(chip, V3020_SECONDS, 0x33); | |
| if (v3020_get_reg(chip, V3020_SECONDS) != 0x33) { | |
| retval = -ENODEV; | |
| goto err_io; | |
| } | |
| /* Make sure frequency measurment mode, test modes, and lock | |
| * are all disabled */ | |
| v3020_set_reg(chip, V3020_STATUS_0, 0x0); | |
| if (pdata->use_gpio) | |
| dev_info(&pdev->dev, "Chip available at GPIOs " | |
| "%d, %d, %d, %d\n", | |
| chip->gpio[V3020_CS].gpio, chip->gpio[V3020_WR].gpio, | |
| chip->gpio[V3020_RD].gpio, chip->gpio[V3020_IO].gpio); | |
| else | |
| dev_info(&pdev->dev, "Chip available at " | |
| "physical address 0x%llx," | |
| "data connected to D%d\n", | |
| (unsigned long long)pdev->resource[0].start, | |
| chip->leftshift); | |
| platform_set_drvdata(pdev, chip); | |
| rtc = rtc_device_register("v3020", | |
| &pdev->dev, &v3020_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(rtc)) { | |
| retval = PTR_ERR(rtc); | |
| goto err_io; | |
| } | |
| chip->rtc = rtc; | |
| return 0; | |
| err_io: | |
| chip->ops->unmap_io(chip); | |
| err_chip: | |
| kfree(chip); | |
| return retval; | |
| } | |
| static int rtc_remove(struct platform_device *dev) | |
| { | |
| struct v3020 *chip = platform_get_drvdata(dev); | |
| struct rtc_device *rtc = chip->rtc; | |
| if (rtc) | |
| rtc_device_unregister(rtc); | |
| chip->ops->unmap_io(chip); | |
| kfree(chip); | |
| return 0; | |
| } | |
| static struct platform_driver rtc_device_driver = { | |
| .probe = rtc_probe, | |
| .remove = rtc_remove, | |
| .driver = { | |
| .name = "v3020", | |
| .owner = THIS_MODULE, | |
| }, | |
| }; | |
| static __init int v3020_init(void) | |
| { | |
| return platform_driver_register(&rtc_device_driver); | |
| } | |
| static __exit void v3020_exit(void) | |
| { | |
| platform_driver_unregister(&rtc_device_driver); | |
| } | |
| module_init(v3020_init); | |
| module_exit(v3020_exit); | |
| MODULE_DESCRIPTION("V3020 RTC"); | |
| MODULE_AUTHOR("Raphael Assenat"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:v3020"); |