| /* | |
| * Amiga mouse driver for Linux/m68k | |
| * | |
| * Copyright (c) 2000-2002 Vojtech Pavlik | |
| * | |
| * Based on the work of: | |
| * Michael Rausch James Banks | |
| * Matther Dillon David Giller | |
| * Nathan Laredo Linus Torvalds | |
| * Johan Myreen Jes Sorensen | |
| * Russell King | |
| */ | |
| /* | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/input.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/irq.h> | |
| #include <asm/setup.h> | |
| #include <asm/system.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/amigahw.h> | |
| #include <asm/amigaints.h> | |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); | |
| MODULE_DESCRIPTION("Amiga mouse driver"); | |
| MODULE_LICENSE("GPL"); | |
| static int amimouse_lastx, amimouse_lasty; | |
| static struct input_dev *amimouse_dev; | |
| static irqreturn_t amimouse_interrupt(int irq, void *dummy) | |
| { | |
| unsigned short joy0dat, potgor; | |
| int nx, ny, dx, dy; | |
| joy0dat = amiga_custom.joy0dat; | |
| nx = joy0dat & 0xff; | |
| ny = joy0dat >> 8; | |
| dx = nx - amimouse_lastx; | |
| dy = ny - amimouse_lasty; | |
| if (dx < -127) dx = (256 + nx) - amimouse_lastx; | |
| if (dx > 127) dx = (nx - 256) - amimouse_lastx; | |
| if (dy < -127) dy = (256 + ny) - amimouse_lasty; | |
| if (dy > 127) dy = (ny - 256) - amimouse_lasty; | |
| amimouse_lastx = nx; | |
| amimouse_lasty = ny; | |
| potgor = amiga_custom.potgor; | |
| input_report_rel(amimouse_dev, REL_X, dx); | |
| input_report_rel(amimouse_dev, REL_Y, dy); | |
| input_report_key(amimouse_dev, BTN_LEFT, ciaa.pra & 0x40); | |
| input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100); | |
| input_report_key(amimouse_dev, BTN_RIGHT, potgor & 0x0400); | |
| input_sync(amimouse_dev); | |
| return IRQ_HANDLED; | |
| } | |
| static int amimouse_open(struct input_dev *dev) | |
| { | |
| unsigned short joy0dat; | |
| joy0dat = amiga_custom.joy0dat; | |
| amimouse_lastx = joy0dat & 0xff; | |
| amimouse_lasty = joy0dat >> 8; | |
| if (request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse", amimouse_interrupt)) { | |
| printk(KERN_ERR "amimouse.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB); | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| static void amimouse_close(struct input_dev *dev) | |
| { | |
| free_irq(IRQ_AMIGA_VERTB, amimouse_interrupt); | |
| } | |
| static int __init amimouse_init(void) | |
| { | |
| int err; | |
| if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE)) | |
| return -ENODEV; | |
| amimouse_dev = input_allocate_device(); | |
| if (!amimouse_dev) | |
| return -ENOMEM; | |
| amimouse_dev->name = "Amiga mouse"; | |
| amimouse_dev->phys = "amimouse/input0"; | |
| amimouse_dev->id.bustype = BUS_AMIGA; | |
| amimouse_dev->id.vendor = 0x0001; | |
| amimouse_dev->id.product = 0x0002; | |
| amimouse_dev->id.version = 0x0100; | |
| amimouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); | |
| amimouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); | |
| amimouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | | |
| BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); | |
| amimouse_dev->open = amimouse_open; | |
| amimouse_dev->close = amimouse_close; | |
| err = input_register_device(amimouse_dev); | |
| if (err) { | |
| input_free_device(amimouse_dev); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void __exit amimouse_exit(void) | |
| { | |
| input_unregister_device(amimouse_dev); | |
| } | |
| module_init(amimouse_init); | |
| module_exit(amimouse_exit); |