| /* | |
| * intel_pstate.c: Native P state management for Intel processors | |
| * | |
| * (C) Copyright 2012 Intel Corporation | |
| * Author: Dirk Brandewie <dirk.j.brandewie@intel.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; version 2 | |
| * of the License. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/module.h> | |
| #include <linux/ktime.h> | |
| #include <linux/hrtimer.h> | |
| #include <linux/tick.h> | |
| #include <linux/slab.h> | |
| #include <linux/sched/cpufreq.h> | |
| #include <linux/list.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/types.h> | |
| #include <linux/fs.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/acpi.h> | |
| #include <linux/vmalloc.h> | |
| #include <trace/events/power.h> | |
| #include <asm/div64.h> | |
| #include <asm/msr.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/intel-family.h> | |
| #define INTEL_CPUFREQ_TRANSITION_LATENCY 20000 | |
| #ifdef CONFIG_ACPI | |
| #include <acpi/processor.h> | |
| #include <acpi/cppc_acpi.h> | |
| #endif | |
| #define FRAC_BITS 8 | |
| #define int_tofp(X) ((int64_t)(X) << FRAC_BITS) | |
| #define fp_toint(X) ((X) >> FRAC_BITS) | |
| #define EXT_BITS 6 | |
| #define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS) | |
| #define fp_ext_toint(X) ((X) >> EXT_FRAC_BITS) | |
| #define int_ext_tofp(X) ((int64_t)(X) << EXT_FRAC_BITS) | |
| static inline int32_t mul_fp(int32_t x, int32_t y) | |
| { | |
| return ((int64_t)x * (int64_t)y) >> FRAC_BITS; | |
| } | |
| static inline int32_t div_fp(s64 x, s64 y) | |
| { | |
| return div64_s64((int64_t)x << FRAC_BITS, y); | |
| } | |
| static inline int ceiling_fp(int32_t x) | |
| { | |
| int mask, ret; | |
| ret = fp_toint(x); | |
| mask = (1 << FRAC_BITS) - 1; | |
| if (x & mask) | |
| ret += 1; | |
| return ret; | |
| } | |
| static inline u64 mul_ext_fp(u64 x, u64 y) | |
| { | |
| return (x * y) >> EXT_FRAC_BITS; | |
| } | |
| static inline u64 div_ext_fp(u64 x, u64 y) | |
| { | |
| return div64_u64(x << EXT_FRAC_BITS, y); | |
| } | |
| /** | |
| * struct sample - Store performance sample | |
| * @core_avg_perf: Ratio of APERF/MPERF which is the actual average | |
| * performance during last sample period | |
| * @busy_scaled: Scaled busy value which is used to calculate next | |
| * P state. This can be different than core_avg_perf | |
| * to account for cpu idle period | |
| * @aperf: Difference of actual performance frequency clock count | |
| * read from APERF MSR between last and current sample | |
| * @mperf: Difference of maximum performance frequency clock count | |
| * read from MPERF MSR between last and current sample | |
| * @tsc: Difference of time stamp counter between last and | |
| * current sample | |
| * @time: Current time from scheduler | |
| * | |
| * This structure is used in the cpudata structure to store performance sample | |
| * data for choosing next P State. | |
| */ | |
| struct sample { | |
| int32_t core_avg_perf; | |
| int32_t busy_scaled; | |
| u64 aperf; | |
| u64 mperf; | |
| u64 tsc; | |
| u64 time; | |
| }; | |
| /** | |
| * struct pstate_data - Store P state data | |
| * @current_pstate: Current requested P state | |
| * @min_pstate: Min P state possible for this platform | |
| * @max_pstate: Max P state possible for this platform | |
| * @max_pstate_physical:This is physical Max P state for a processor | |
| * This can be higher than the max_pstate which can | |
| * be limited by platform thermal design power limits | |
| * @scaling: Scaling factor to convert frequency to cpufreq | |
| * frequency units | |
| * @turbo_pstate: Max Turbo P state possible for this platform | |
| * @max_freq: @max_pstate frequency in cpufreq units | |
| * @turbo_freq: @turbo_pstate frequency in cpufreq units | |
| * | |
| * Stores the per cpu model P state limits and current P state. | |
| */ | |
| struct pstate_data { | |
| int current_pstate; | |
| int min_pstate; | |
| int max_pstate; | |
| int max_pstate_physical; | |
| int scaling; | |
| int turbo_pstate; | |
| unsigned int max_freq; | |
| unsigned int turbo_freq; | |
| }; | |
| /** | |
| * struct vid_data - Stores voltage information data | |
| * @min: VID data for this platform corresponding to | |
| * the lowest P state | |
| * @max: VID data corresponding to the highest P State. | |
| * @turbo: VID data for turbo P state | |
| * @ratio: Ratio of (vid max - vid min) / | |
| * (max P state - Min P State) | |
| * | |
| * Stores the voltage data for DVFS (Dynamic Voltage and Frequency Scaling) | |
| * This data is used in Atom platforms, where in addition to target P state, | |
| * the voltage data needs to be specified to select next P State. | |
| */ | |
| struct vid_data { | |
| int min; | |
| int max; | |
| int turbo; | |
| int32_t ratio; | |
| }; | |
| /** | |
| * struct _pid - Stores PID data | |
| * @setpoint: Target set point for busyness or performance | |
| * @integral: Storage for accumulated error values | |
| * @p_gain: PID proportional gain | |
| * @i_gain: PID integral gain | |
| * @d_gain: PID derivative gain | |
| * @deadband: PID deadband | |
| * @last_err: Last error storage for integral part of PID calculation | |
| * | |
| * Stores PID coefficients and last error for PID controller. | |
| */ | |
| struct _pid { | |
| int setpoint; | |
| int32_t integral; | |
| int32_t p_gain; | |
| int32_t i_gain; | |
| int32_t d_gain; | |
| int deadband; | |
| int32_t last_err; | |
| }; | |
| /** | |
| * struct perf_limits - Store user and policy limits | |
| * @no_turbo: User requested turbo state from intel_pstate sysfs | |
| * @turbo_disabled: Platform turbo status either from msr | |
| * MSR_IA32_MISC_ENABLE or when maximum available pstate | |
| * matches the maximum turbo pstate | |
| * @max_perf_pct: Effective maximum performance limit in percentage, this | |
| * is minimum of either limits enforced by cpufreq policy | |
| * or limits from user set limits via intel_pstate sysfs | |
| * @min_perf_pct: Effective minimum performance limit in percentage, this | |
| * is maximum of either limits enforced by cpufreq policy | |
| * or limits from user set limits via intel_pstate sysfs | |
| * @max_perf: This is a scaled value between 0 to 255 for max_perf_pct | |
| * This value is used to limit max pstate | |
| * @min_perf: This is a scaled value between 0 to 255 for min_perf_pct | |
| * This value is used to limit min pstate | |
| * @max_policy_pct: The maximum performance in percentage enforced by | |
| * cpufreq setpolicy interface | |
| * @max_sysfs_pct: The maximum performance in percentage enforced by | |
| * intel pstate sysfs interface, unused when per cpu | |
| * controls are enforced | |
| * @min_policy_pct: The minimum performance in percentage enforced by | |
| * cpufreq setpolicy interface | |
| * @min_sysfs_pct: The minimum performance in percentage enforced by | |
| * intel pstate sysfs interface, unused when per cpu | |
| * controls are enforced | |
| * | |
| * Storage for user and policy defined limits. | |
| */ | |
| struct perf_limits { | |
| int no_turbo; | |
| int turbo_disabled; | |
| int max_perf_pct; | |
| int min_perf_pct; | |
| int32_t max_perf; | |
| int32_t min_perf; | |
| int max_policy_pct; | |
| int max_sysfs_pct; | |
| int min_policy_pct; | |
| int min_sysfs_pct; | |
| }; | |
| /** | |
| * struct cpudata - Per CPU instance data storage | |
| * @cpu: CPU number for this instance data | |
| * @policy: CPUFreq policy value | |
| * @update_util: CPUFreq utility callback information | |
| * @update_util_set: CPUFreq utility callback is set | |
| * @iowait_boost: iowait-related boost fraction | |
| * @last_update: Time of the last update. | |
| * @pstate: Stores P state limits for this CPU | |
| * @vid: Stores VID limits for this CPU | |
| * @pid: Stores PID parameters for this CPU | |
| * @last_sample_time: Last Sample time | |
| * @prev_aperf: Last APERF value read from APERF MSR | |
| * @prev_mperf: Last MPERF value read from MPERF MSR | |
| * @prev_tsc: Last timestamp counter (TSC) value | |
| * @prev_cummulative_iowait: IO Wait time difference from last and | |
| * current sample | |
| * @sample: Storage for storing last Sample data | |
| * @perf_limits: Pointer to perf_limit unique to this CPU | |
| * Not all field in the structure are applicable | |
| * when per cpu controls are enforced | |
| * @acpi_perf_data: Stores ACPI perf information read from _PSS | |
| * @valid_pss_table: Set to true for valid ACPI _PSS entries found | |
| * @epp_powersave: Last saved HWP energy performance preference | |
| * (EPP) or energy performance bias (EPB), | |
| * when policy switched to performance | |
| * @epp_policy: Last saved policy used to set EPP/EPB | |
| * @epp_default: Power on default HWP energy performance | |
| * preference/bias | |
| * @epp_saved: Saved EPP/EPB during system suspend or CPU offline | |
| * operation | |
| * | |
| * This structure stores per CPU instance data for all CPUs. | |
| */ | |
| struct cpudata { | |
| int cpu; | |
| unsigned int policy; | |
| struct update_util_data update_util; | |
| bool update_util_set; | |
| struct pstate_data pstate; | |
| struct vid_data vid; | |
| struct _pid pid; | |
| u64 last_update; | |
| u64 last_sample_time; | |
| u64 prev_aperf; | |
| u64 prev_mperf; | |
| u64 prev_tsc; | |
| u64 prev_cummulative_iowait; | |
| struct sample sample; | |
| struct perf_limits *perf_limits; | |
| #ifdef CONFIG_ACPI | |
| struct acpi_processor_performance acpi_perf_data; | |
| bool valid_pss_table; | |
| #endif | |
| unsigned int iowait_boost; | |
| s16 epp_powersave; | |
| s16 epp_policy; | |
| s16 epp_default; | |
| s16 epp_saved; | |
| }; | |
| static struct cpudata **all_cpu_data; | |
| /** | |
| * struct pstate_adjust_policy - Stores static PID configuration data | |
| * @sample_rate_ms: PID calculation sample rate in ms | |
| * @sample_rate_ns: Sample rate calculation in ns | |
| * @deadband: PID deadband | |
| * @setpoint: PID Setpoint | |
| * @p_gain_pct: PID proportional gain | |
| * @i_gain_pct: PID integral gain | |
| * @d_gain_pct: PID derivative gain | |
| * | |
| * Stores per CPU model static PID configuration data. | |
| */ | |
| struct pstate_adjust_policy { | |
| int sample_rate_ms; | |
| s64 sample_rate_ns; | |
| int deadband; | |
| int setpoint; | |
| int p_gain_pct; | |
| int d_gain_pct; | |
| int i_gain_pct; | |
| }; | |
| /** | |
| * struct pstate_funcs - Per CPU model specific callbacks | |
| * @get_max: Callback to get maximum non turbo effective P state | |
| * @get_max_physical: Callback to get maximum non turbo physical P state | |
| * @get_min: Callback to get minimum P state | |
| * @get_turbo: Callback to get turbo P state | |
| * @get_scaling: Callback to get frequency scaling factor | |
| * @get_val: Callback to convert P state to actual MSR write value | |
| * @get_vid: Callback to get VID data for Atom platforms | |
| * @get_target_pstate: Callback to a function to calculate next P state to use | |
| * | |
| * Core and Atom CPU models have different way to get P State limits. This | |
| * structure is used to store those callbacks. | |
| */ | |
| struct pstate_funcs { | |
| int (*get_max)(void); | |
| int (*get_max_physical)(void); | |
| int (*get_min)(void); | |
| int (*get_turbo)(void); | |
| int (*get_scaling)(void); | |
| u64 (*get_val)(struct cpudata*, int pstate); | |
| void (*get_vid)(struct cpudata *); | |
| int32_t (*get_target_pstate)(struct cpudata *); | |
| }; | |
| /** | |
| * struct cpu_defaults- Per CPU model default config data | |
| * @pid_policy: PID config data | |
| * @funcs: Callback function data | |
| */ | |
| struct cpu_defaults { | |
| struct pstate_adjust_policy pid_policy; | |
| struct pstate_funcs funcs; | |
| }; | |
| static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu); | |
| static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu); | |
| static struct pstate_adjust_policy pid_params __read_mostly; | |
| static struct pstate_funcs pstate_funcs __read_mostly; | |
| static int hwp_active __read_mostly; | |
| static bool per_cpu_limits __read_mostly; | |
| static bool driver_registered __read_mostly; | |
| #ifdef CONFIG_ACPI | |
| static bool acpi_ppc; | |
| #endif | |
| static struct perf_limits performance_limits; | |
| static struct perf_limits powersave_limits; | |
| static struct perf_limits *limits; | |
| static void intel_pstate_init_limits(struct perf_limits *limits) | |
| { | |
| memset(limits, 0, sizeof(*limits)); | |
| limits->max_perf_pct = 100; | |
| limits->max_perf = int_ext_tofp(1); | |
| limits->max_policy_pct = 100; | |
| limits->max_sysfs_pct = 100; | |
| } | |
| static void intel_pstate_set_performance_limits(struct perf_limits *limits) | |
| { | |
| intel_pstate_init_limits(limits); | |
| limits->min_perf_pct = 100; | |
| limits->min_perf = int_ext_tofp(1); | |
| limits->min_sysfs_pct = 100; | |
| } | |
| static DEFINE_MUTEX(intel_pstate_driver_lock); | |
| static DEFINE_MUTEX(intel_pstate_limits_lock); | |
| #ifdef CONFIG_ACPI | |
| static bool intel_pstate_get_ppc_enable_status(void) | |
| { | |
| if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER || | |
| acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER) | |
| return true; | |
| return acpi_ppc; | |
| } | |
| #ifdef CONFIG_ACPI_CPPC_LIB | |
| /* The work item is needed to avoid CPU hotplug locking issues */ | |
| static void intel_pstste_sched_itmt_work_fn(struct work_struct *work) | |
| { | |
| sched_set_itmt_support(); | |
| } | |
| static DECLARE_WORK(sched_itmt_work, intel_pstste_sched_itmt_work_fn); | |
| static void intel_pstate_set_itmt_prio(int cpu) | |
| { | |
| struct cppc_perf_caps cppc_perf; | |
| static u32 max_highest_perf = 0, min_highest_perf = U32_MAX; | |
| int ret; | |
| ret = cppc_get_perf_caps(cpu, &cppc_perf); | |
| if (ret) | |
| return; | |
| /* | |
| * The priorities can be set regardless of whether or not | |
| * sched_set_itmt_support(true) has been called and it is valid to | |
| * update them at any time after it has been called. | |
| */ | |
| sched_set_itmt_core_prio(cppc_perf.highest_perf, cpu); | |
| if (max_highest_perf <= min_highest_perf) { | |
| if (cppc_perf.highest_perf > max_highest_perf) | |
| max_highest_perf = cppc_perf.highest_perf; | |
| if (cppc_perf.highest_perf < min_highest_perf) | |
| min_highest_perf = cppc_perf.highest_perf; | |
| if (max_highest_perf > min_highest_perf) { | |
| /* | |
| * This code can be run during CPU online under the | |
| * CPU hotplug locks, so sched_set_itmt_support() | |
| * cannot be called from here. Queue up a work item | |
| * to invoke it. | |
| */ | |
| schedule_work(&sched_itmt_work); | |
| } | |
| } | |
| } | |
| #else | |
| static void intel_pstate_set_itmt_prio(int cpu) | |
| { | |
| } | |
| #endif | |
| static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu; | |
| int ret; | |
| int i; | |
| if (hwp_active) { | |
| intel_pstate_set_itmt_prio(policy->cpu); | |
| return; | |
| } | |
| if (!intel_pstate_get_ppc_enable_status()) | |
| return; | |
| cpu = all_cpu_data[policy->cpu]; | |
| ret = acpi_processor_register_performance(&cpu->acpi_perf_data, | |
| policy->cpu); | |
| if (ret) | |
| return; | |
| /* | |
| * Check if the control value in _PSS is for PERF_CTL MSR, which should | |
| * guarantee that the states returned by it map to the states in our | |
| * list directly. | |
| */ | |
| if (cpu->acpi_perf_data.control_register.space_id != | |
| ACPI_ADR_SPACE_FIXED_HARDWARE) | |
| goto err; | |
| /* | |
| * If there is only one entry _PSS, simply ignore _PSS and continue as | |
| * usual without taking _PSS into account | |
| */ | |
| if (cpu->acpi_perf_data.state_count < 2) | |
| goto err; | |
| pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu); | |
| for (i = 0; i < cpu->acpi_perf_data.state_count; i++) { | |
| pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n", | |
| (i == cpu->acpi_perf_data.state ? '*' : ' '), i, | |
| (u32) cpu->acpi_perf_data.states[i].core_frequency, | |
| (u32) cpu->acpi_perf_data.states[i].power, | |
| (u32) cpu->acpi_perf_data.states[i].control); | |
| } | |
| /* | |
| * The _PSS table doesn't contain whole turbo frequency range. | |
| * This just contains +1 MHZ above the max non turbo frequency, | |
| * with control value corresponding to max turbo ratio. But | |
| * when cpufreq set policy is called, it will call with this | |
| * max frequency, which will cause a reduced performance as | |
| * this driver uses real max turbo frequency as the max | |
| * frequency. So correct this frequency in _PSS table to | |
| * correct max turbo frequency based on the turbo state. | |
| * Also need to convert to MHz as _PSS freq is in MHz. | |
| */ | |
| if (!limits->turbo_disabled) | |
| cpu->acpi_perf_data.states[0].core_frequency = | |
| policy->cpuinfo.max_freq / 1000; | |
| cpu->valid_pss_table = true; | |
| pr_debug("_PPC limits will be enforced\n"); | |
| return; | |
| err: | |
| cpu->valid_pss_table = false; | |
| acpi_processor_unregister_performance(policy->cpu); | |
| } | |
| static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu; | |
| cpu = all_cpu_data[policy->cpu]; | |
| if (!cpu->valid_pss_table) | |
| return; | |
| acpi_processor_unregister_performance(policy->cpu); | |
| } | |
| #else | |
| static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) | |
| { | |
| } | |
| static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) | |
| { | |
| } | |
| #endif | |
| static inline void pid_reset(struct _pid *pid, int setpoint, int busy, | |
| int deadband, int integral) { | |
| pid->setpoint = int_tofp(setpoint); | |
| pid->deadband = int_tofp(deadband); | |
| pid->integral = int_tofp(integral); | |
| pid->last_err = int_tofp(setpoint) - int_tofp(busy); | |
| } | |
| static inline void pid_p_gain_set(struct _pid *pid, int percent) | |
| { | |
| pid->p_gain = div_fp(percent, 100); | |
| } | |
| static inline void pid_i_gain_set(struct _pid *pid, int percent) | |
| { | |
| pid->i_gain = div_fp(percent, 100); | |
| } | |
| static inline void pid_d_gain_set(struct _pid *pid, int percent) | |
| { | |
| pid->d_gain = div_fp(percent, 100); | |
| } | |
| static signed int pid_calc(struct _pid *pid, int32_t busy) | |
| { | |
| signed int result; | |
| int32_t pterm, dterm, fp_error; | |
| int32_t integral_limit; | |
| fp_error = pid->setpoint - busy; | |
| if (abs(fp_error) <= pid->deadband) | |
| return 0; | |
| pterm = mul_fp(pid->p_gain, fp_error); | |
| pid->integral += fp_error; | |
| /* | |
| * We limit the integral here so that it will never | |
| * get higher than 30. This prevents it from becoming | |
| * too large an input over long periods of time and allows | |
| * it to get factored out sooner. | |
| * | |
| * The value of 30 was chosen through experimentation. | |
| */ | |
| integral_limit = int_tofp(30); | |
| if (pid->integral > integral_limit) | |
| pid->integral = integral_limit; | |
| if (pid->integral < -integral_limit) | |
| pid->integral = -integral_limit; | |
| dterm = mul_fp(pid->d_gain, fp_error - pid->last_err); | |
| pid->last_err = fp_error; | |
| result = pterm + mul_fp(pid->integral, pid->i_gain) + dterm; | |
| result = result + (1 << (FRAC_BITS-1)); | |
| return (signed int)fp_toint(result); | |
| } | |
| static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu) | |
| { | |
| pid_p_gain_set(&cpu->pid, pid_params.p_gain_pct); | |
| pid_d_gain_set(&cpu->pid, pid_params.d_gain_pct); | |
| pid_i_gain_set(&cpu->pid, pid_params.i_gain_pct); | |
| pid_reset(&cpu->pid, pid_params.setpoint, 100, pid_params.deadband, 0); | |
| } | |
| static inline void intel_pstate_reset_all_pid(void) | |
| { | |
| unsigned int cpu; | |
| for_each_online_cpu(cpu) { | |
| if (all_cpu_data[cpu]) | |
| intel_pstate_busy_pid_reset(all_cpu_data[cpu]); | |
| } | |
| } | |
| static inline void update_turbo_state(void) | |
| { | |
| u64 misc_en; | |
| struct cpudata *cpu; | |
| cpu = all_cpu_data[0]; | |
| rdmsrl(MSR_IA32_MISC_ENABLE, misc_en); | |
| limits->turbo_disabled = | |
| (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE || | |
| cpu->pstate.max_pstate == cpu->pstate.turbo_pstate); | |
| } | |
| static s16 intel_pstate_get_epb(struct cpudata *cpu_data) | |
| { | |
| u64 epb; | |
| int ret; | |
| if (!static_cpu_has(X86_FEATURE_EPB)) | |
| return -ENXIO; | |
| ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); | |
| if (ret) | |
| return (s16)ret; | |
| return (s16)(epb & 0x0f); | |
| } | |
| static s16 intel_pstate_get_epp(struct cpudata *cpu_data, u64 hwp_req_data) | |
| { | |
| s16 epp; | |
| if (static_cpu_has(X86_FEATURE_HWP_EPP)) { | |
| /* | |
| * When hwp_req_data is 0, means that caller didn't read | |
| * MSR_HWP_REQUEST, so need to read and get EPP. | |
| */ | |
| if (!hwp_req_data) { | |
| epp = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, | |
| &hwp_req_data); | |
| if (epp) | |
| return epp; | |
| } | |
| epp = (hwp_req_data >> 24) & 0xff; | |
| } else { | |
| /* When there is no EPP present, HWP uses EPB settings */ | |
| epp = intel_pstate_get_epb(cpu_data); | |
| } | |
| return epp; | |
| } | |
| static int intel_pstate_set_epb(int cpu, s16 pref) | |
| { | |
| u64 epb; | |
| int ret; | |
| if (!static_cpu_has(X86_FEATURE_EPB)) | |
| return -ENXIO; | |
| ret = rdmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); | |
| if (ret) | |
| return ret; | |
| epb = (epb & ~0x0f) | pref; | |
| wrmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, epb); | |
| return 0; | |
| } | |
| /* | |
| * EPP/EPB display strings corresponding to EPP index in the | |
| * energy_perf_strings[] | |
| * index String | |
| *------------------------------------- | |
| * 0 default | |
| * 1 performance | |
| * 2 balance_performance | |
| * 3 balance_power | |
| * 4 power | |
| */ | |
| static const char * const energy_perf_strings[] = { | |
| "default", | |
| "performance", | |
| "balance_performance", | |
| "balance_power", | |
| "power", | |
| NULL | |
| }; | |
| static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data) | |
| { | |
| s16 epp; | |
| int index = -EINVAL; | |
| epp = intel_pstate_get_epp(cpu_data, 0); | |
| if (epp < 0) | |
| return epp; | |
| if (static_cpu_has(X86_FEATURE_HWP_EPP)) { | |
| /* | |
| * Range: | |
| * 0x00-0x3F : Performance | |
| * 0x40-0x7F : Balance performance | |
| * 0x80-0xBF : Balance power | |
| * 0xC0-0xFF : Power | |
| * The EPP is a 8 bit value, but our ranges restrict the | |
| * value which can be set. Here only using top two bits | |
| * effectively. | |
| */ | |
| index = (epp >> 6) + 1; | |
| } else if (static_cpu_has(X86_FEATURE_EPB)) { | |
| /* | |
| * Range: | |
| * 0x00-0x03 : Performance | |
| * 0x04-0x07 : Balance performance | |
| * 0x08-0x0B : Balance power | |
| * 0x0C-0x0F : Power | |
| * The EPB is a 4 bit value, but our ranges restrict the | |
| * value which can be set. Here only using top two bits | |
| * effectively. | |
| */ | |
| index = (epp >> 2) + 1; | |
| } | |
| return index; | |
| } | |
| static int intel_pstate_set_energy_pref_index(struct cpudata *cpu_data, | |
| int pref_index) | |
| { | |
| int epp = -EINVAL; | |
| int ret; | |
| if (!pref_index) | |
| epp = cpu_data->epp_default; | |
| mutex_lock(&intel_pstate_limits_lock); | |
| if (static_cpu_has(X86_FEATURE_HWP_EPP)) { | |
| u64 value; | |
| ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, &value); | |
| if (ret) | |
| goto return_pref; | |
| value &= ~GENMASK_ULL(31, 24); | |
| /* | |
| * If epp is not default, convert from index into | |
| * energy_perf_strings to epp value, by shifting 6 | |
| * bits left to use only top two bits in epp. | |
| * The resultant epp need to shifted by 24 bits to | |
| * epp position in MSR_HWP_REQUEST. | |
| */ | |
| if (epp == -EINVAL) | |
| epp = (pref_index - 1) << 6; | |
| value |= (u64)epp << 24; | |
| ret = wrmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, value); | |
| } else { | |
| if (epp == -EINVAL) | |
| epp = (pref_index - 1) << 2; | |
| ret = intel_pstate_set_epb(cpu_data->cpu, epp); | |
| } | |
| return_pref: | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| return ret; | |
| } | |
| static ssize_t show_energy_performance_available_preferences( | |
| struct cpufreq_policy *policy, char *buf) | |
| { | |
| int i = 0; | |
| int ret = 0; | |
| while (energy_perf_strings[i] != NULL) | |
| ret += sprintf(&buf[ret], "%s ", energy_perf_strings[i++]); | |
| ret += sprintf(&buf[ret], "\n"); | |
| return ret; | |
| } | |
| cpufreq_freq_attr_ro(energy_performance_available_preferences); | |
| static ssize_t store_energy_performance_preference( | |
| struct cpufreq_policy *policy, const char *buf, size_t count) | |
| { | |
| struct cpudata *cpu_data = all_cpu_data[policy->cpu]; | |
| char str_preference[21]; | |
| int ret, i = 0; | |
| ret = sscanf(buf, "%20s", str_preference); | |
| if (ret != 1) | |
| return -EINVAL; | |
| while (energy_perf_strings[i] != NULL) { | |
| if (!strcmp(str_preference, energy_perf_strings[i])) { | |
| intel_pstate_set_energy_pref_index(cpu_data, i); | |
| return count; | |
| } | |
| ++i; | |
| } | |
| return -EINVAL; | |
| } | |
| static ssize_t show_energy_performance_preference( | |
| struct cpufreq_policy *policy, char *buf) | |
| { | |
| struct cpudata *cpu_data = all_cpu_data[policy->cpu]; | |
| int preference; | |
| preference = intel_pstate_get_energy_pref_index(cpu_data); | |
| if (preference < 0) | |
| return preference; | |
| return sprintf(buf, "%s\n", energy_perf_strings[preference]); | |
| } | |
| cpufreq_freq_attr_rw(energy_performance_preference); | |
| static struct freq_attr *hwp_cpufreq_attrs[] = { | |
| &energy_performance_preference, | |
| &energy_performance_available_preferences, | |
| NULL, | |
| }; | |
| static void intel_pstate_hwp_set(struct cpufreq_policy *policy) | |
| { | |
| int min, hw_min, max, hw_max, cpu, range, adj_range; | |
| struct perf_limits *perf_limits = limits; | |
| u64 value, cap; | |
| for_each_cpu(cpu, policy->cpus) { | |
| int max_perf_pct, min_perf_pct; | |
| struct cpudata *cpu_data = all_cpu_data[cpu]; | |
| s16 epp; | |
| if (per_cpu_limits) | |
| perf_limits = all_cpu_data[cpu]->perf_limits; | |
| rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap); | |
| hw_min = HWP_LOWEST_PERF(cap); | |
| if (limits->no_turbo) | |
| hw_max = HWP_GUARANTEED_PERF(cap); | |
| else | |
| hw_max = HWP_HIGHEST_PERF(cap); | |
| range = hw_max - hw_min; | |
| max_perf_pct = perf_limits->max_perf_pct; | |
| min_perf_pct = perf_limits->min_perf_pct; | |
| rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); | |
| adj_range = min_perf_pct * range / 100; | |
| min = hw_min + adj_range; | |
| value &= ~HWP_MIN_PERF(~0L); | |
| value |= HWP_MIN_PERF(min); | |
| adj_range = max_perf_pct * range / 100; | |
| max = hw_min + adj_range; | |
| value &= ~HWP_MAX_PERF(~0L); | |
| value |= HWP_MAX_PERF(max); | |
| if (cpu_data->epp_policy == cpu_data->policy) | |
| goto skip_epp; | |
| cpu_data->epp_policy = cpu_data->policy; | |
| if (cpu_data->epp_saved >= 0) { | |
| epp = cpu_data->epp_saved; | |
| cpu_data->epp_saved = -EINVAL; | |
| goto update_epp; | |
| } | |
| if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) { | |
| epp = intel_pstate_get_epp(cpu_data, value); | |
| cpu_data->epp_powersave = epp; | |
| /* If EPP read was failed, then don't try to write */ | |
| if (epp < 0) | |
| goto skip_epp; | |
| epp = 0; | |
| } else { | |
| /* skip setting EPP, when saved value is invalid */ | |
| if (cpu_data->epp_powersave < 0) | |
| goto skip_epp; | |
| /* | |
| * No need to restore EPP when it is not zero. This | |
| * means: | |
| * - Policy is not changed | |
| * - user has manually changed | |
| * - Error reading EPB | |
| */ | |
| epp = intel_pstate_get_epp(cpu_data, value); | |
| if (epp) | |
| goto skip_epp; | |
| epp = cpu_data->epp_powersave; | |
| } | |
| update_epp: | |
| if (static_cpu_has(X86_FEATURE_HWP_EPP)) { | |
| value &= ~GENMASK_ULL(31, 24); | |
| value |= (u64)epp << 24; | |
| } else { | |
| intel_pstate_set_epb(cpu, epp); | |
| } | |
| skip_epp: | |
| wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); | |
| } | |
| } | |
| static int intel_pstate_hwp_set_policy(struct cpufreq_policy *policy) | |
| { | |
| if (hwp_active) | |
| intel_pstate_hwp_set(policy); | |
| return 0; | |
| } | |
| static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu_data = all_cpu_data[policy->cpu]; | |
| if (!hwp_active) | |
| return 0; | |
| cpu_data->epp_saved = intel_pstate_get_epp(cpu_data, 0); | |
| return 0; | |
| } | |
| static int intel_pstate_resume(struct cpufreq_policy *policy) | |
| { | |
| int ret; | |
| if (!hwp_active) | |
| return 0; | |
| mutex_lock(&intel_pstate_limits_lock); | |
| all_cpu_data[policy->cpu]->epp_policy = 0; | |
| ret = intel_pstate_hwp_set_policy(policy); | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| return ret; | |
| } | |
| static void intel_pstate_update_policies(void) | |
| __releases(&intel_pstate_limits_lock) | |
| __acquires(&intel_pstate_limits_lock) | |
| { | |
| struct perf_limits *saved_limits = limits; | |
| int cpu; | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| for_each_possible_cpu(cpu) | |
| cpufreq_update_policy(cpu); | |
| mutex_lock(&intel_pstate_limits_lock); | |
| limits = saved_limits; | |
| } | |
| /************************** debugfs begin ************************/ | |
| static int pid_param_set(void *data, u64 val) | |
| { | |
| *(u32 *)data = val; | |
| intel_pstate_reset_all_pid(); | |
| return 0; | |
| } | |
| static int pid_param_get(void *data, u64 *val) | |
| { | |
| *val = *(u32 *)data; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fops_pid_param, pid_param_get, pid_param_set, "%llu\n"); | |
| static struct dentry *debugfs_parent; | |
| struct pid_param { | |
| char *name; | |
| void *value; | |
| struct dentry *dentry; | |
| }; | |
| static struct pid_param pid_files[] = { | |
| {"sample_rate_ms", &pid_params.sample_rate_ms, }, | |
| {"d_gain_pct", &pid_params.d_gain_pct, }, | |
| {"i_gain_pct", &pid_params.i_gain_pct, }, | |
| {"deadband", &pid_params.deadband, }, | |
| {"setpoint", &pid_params.setpoint, }, | |
| {"p_gain_pct", &pid_params.p_gain_pct, }, | |
| {NULL, NULL, } | |
| }; | |
| static void intel_pstate_debug_expose_params(void) | |
| { | |
| int i; | |
| debugfs_parent = debugfs_create_dir("pstate_snb", NULL); | |
| if (IS_ERR_OR_NULL(debugfs_parent)) | |
| return; | |
| for (i = 0; pid_files[i].name; i++) { | |
| struct dentry *dentry; | |
| dentry = debugfs_create_file(pid_files[i].name, 0660, | |
| debugfs_parent, pid_files[i].value, | |
| &fops_pid_param); | |
| if (!IS_ERR(dentry)) | |
| pid_files[i].dentry = dentry; | |
| } | |
| } | |
| static void intel_pstate_debug_hide_params(void) | |
| { | |
| int i; | |
| if (IS_ERR_OR_NULL(debugfs_parent)) | |
| return; | |
| for (i = 0; pid_files[i].name; i++) { | |
| debugfs_remove(pid_files[i].dentry); | |
| pid_files[i].dentry = NULL; | |
| } | |
| debugfs_remove(debugfs_parent); | |
| debugfs_parent = NULL; | |
| } | |
| /************************** debugfs end ************************/ | |
| /************************** sysfs begin ************************/ | |
| #define show_one(file_name, object) \ | |
| static ssize_t show_##file_name \ | |
| (struct kobject *kobj, struct attribute *attr, char *buf) \ | |
| { \ | |
| return sprintf(buf, "%u\n", limits->object); \ | |
| } | |
| static ssize_t intel_pstate_show_status(char *buf); | |
| static int intel_pstate_update_status(const char *buf, size_t size); | |
| static ssize_t show_status(struct kobject *kobj, | |
| struct attribute *attr, char *buf) | |
| { | |
| ssize_t ret; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| ret = intel_pstate_show_status(buf); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return ret; | |
| } | |
| static ssize_t store_status(struct kobject *a, struct attribute *b, | |
| const char *buf, size_t count) | |
| { | |
| char *p = memchr(buf, '\n', count); | |
| int ret; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| ret = intel_pstate_update_status(buf, p ? p - buf : count); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return ret < 0 ? ret : count; | |
| } | |
| static ssize_t show_turbo_pct(struct kobject *kobj, | |
| struct attribute *attr, char *buf) | |
| { | |
| struct cpudata *cpu; | |
| int total, no_turbo, turbo_pct; | |
| uint32_t turbo_fp; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| if (!driver_registered) { | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EAGAIN; | |
| } | |
| cpu = all_cpu_data[0]; | |
| total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; | |
| no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1; | |
| turbo_fp = div_fp(no_turbo, total); | |
| turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100))); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return sprintf(buf, "%u\n", turbo_pct); | |
| } | |
| static ssize_t show_num_pstates(struct kobject *kobj, | |
| struct attribute *attr, char *buf) | |
| { | |
| struct cpudata *cpu; | |
| int total; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| if (!driver_registered) { | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EAGAIN; | |
| } | |
| cpu = all_cpu_data[0]; | |
| total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return sprintf(buf, "%u\n", total); | |
| } | |
| static ssize_t show_no_turbo(struct kobject *kobj, | |
| struct attribute *attr, char *buf) | |
| { | |
| ssize_t ret; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| if (!driver_registered) { | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EAGAIN; | |
| } | |
| update_turbo_state(); | |
| if (limits->turbo_disabled) | |
| ret = sprintf(buf, "%u\n", limits->turbo_disabled); | |
| else | |
| ret = sprintf(buf, "%u\n", limits->no_turbo); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return ret; | |
| } | |
| static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| if (!driver_registered) { | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EAGAIN; | |
| } | |
| mutex_lock(&intel_pstate_limits_lock); | |
| update_turbo_state(); | |
| if (limits->turbo_disabled) { | |
| pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EPERM; | |
| } | |
| limits->no_turbo = clamp_t(int, input, 0, 1); | |
| intel_pstate_update_policies(); | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return count; | |
| } | |
| static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| if (!driver_registered) { | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EAGAIN; | |
| } | |
| mutex_lock(&intel_pstate_limits_lock); | |
| limits->max_sysfs_pct = clamp_t(int, input, 0 , 100); | |
| limits->max_perf_pct = min(limits->max_policy_pct, | |
| limits->max_sysfs_pct); | |
| limits->max_perf_pct = max(limits->min_policy_pct, | |
| limits->max_perf_pct); | |
| limits->max_perf_pct = max(limits->min_perf_pct, | |
| limits->max_perf_pct); | |
| limits->max_perf = div_ext_fp(limits->max_perf_pct, 100); | |
| intel_pstate_update_policies(); | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return count; | |
| } | |
| static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| mutex_lock(&intel_pstate_driver_lock); | |
| if (!driver_registered) { | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return -EAGAIN; | |
| } | |
| mutex_lock(&intel_pstate_limits_lock); | |
| limits->min_sysfs_pct = clamp_t(int, input, 0 , 100); | |
| limits->min_perf_pct = max(limits->min_policy_pct, | |
| limits->min_sysfs_pct); | |
| limits->min_perf_pct = min(limits->max_policy_pct, | |
| limits->min_perf_pct); | |
| limits->min_perf_pct = min(limits->max_perf_pct, | |
| limits->min_perf_pct); | |
| limits->min_perf = div_ext_fp(limits->min_perf_pct, 100); | |
| intel_pstate_update_policies(); | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| return count; | |
| } | |
| show_one(max_perf_pct, max_perf_pct); | |
| show_one(min_perf_pct, min_perf_pct); | |
| define_one_global_rw(status); | |
| define_one_global_rw(no_turbo); | |
| define_one_global_rw(max_perf_pct); | |
| define_one_global_rw(min_perf_pct); | |
| define_one_global_ro(turbo_pct); | |
| define_one_global_ro(num_pstates); | |
| static struct attribute *intel_pstate_attributes[] = { | |
| &status.attr, | |
| &no_turbo.attr, | |
| &turbo_pct.attr, | |
| &num_pstates.attr, | |
| NULL | |
| }; | |
| static struct attribute_group intel_pstate_attr_group = { | |
| .attrs = intel_pstate_attributes, | |
| }; | |
| static void __init intel_pstate_sysfs_expose_params(void) | |
| { | |
| struct kobject *intel_pstate_kobject; | |
| int rc; | |
| intel_pstate_kobject = kobject_create_and_add("intel_pstate", | |
| &cpu_subsys.dev_root->kobj); | |
| if (WARN_ON(!intel_pstate_kobject)) | |
| return; | |
| rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group); | |
| if (WARN_ON(rc)) | |
| return; | |
| /* | |
| * If per cpu limits are enforced there are no global limits, so | |
| * return without creating max/min_perf_pct attributes | |
| */ | |
| if (per_cpu_limits) | |
| return; | |
| rc = sysfs_create_file(intel_pstate_kobject, &max_perf_pct.attr); | |
| WARN_ON(rc); | |
| rc = sysfs_create_file(intel_pstate_kobject, &min_perf_pct.attr); | |
| WARN_ON(rc); | |
| } | |
| /************************** sysfs end ************************/ | |
| static void intel_pstate_hwp_enable(struct cpudata *cpudata) | |
| { | |
| /* First disable HWP notification interrupt as we don't process them */ | |
| if (static_cpu_has(X86_FEATURE_HWP_NOTIFY)) | |
| wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00); | |
| wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1); | |
| cpudata->epp_policy = 0; | |
| if (cpudata->epp_default == -EINVAL) | |
| cpudata->epp_default = intel_pstate_get_epp(cpudata, 0); | |
| } | |
| #define MSR_IA32_POWER_CTL_BIT_EE 19 | |
| /* Disable energy efficiency optimization */ | |
| static void intel_pstate_disable_ee(int cpu) | |
| { | |
| u64 power_ctl; | |
| int ret; | |
| ret = rdmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, &power_ctl); | |
| if (ret) | |
| return; | |
| if (!(power_ctl & BIT(MSR_IA32_POWER_CTL_BIT_EE))) { | |
| pr_info("Disabling energy efficiency optimization\n"); | |
| power_ctl |= BIT(MSR_IA32_POWER_CTL_BIT_EE); | |
| wrmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, power_ctl); | |
| } | |
| } | |
| static int atom_get_min_pstate(void) | |
| { | |
| u64 value; | |
| rdmsrl(MSR_ATOM_CORE_RATIOS, value); | |
| return (value >> 8) & 0x7F; | |
| } | |
| static int atom_get_max_pstate(void) | |
| { | |
| u64 value; | |
| rdmsrl(MSR_ATOM_CORE_RATIOS, value); | |
| return (value >> 16) & 0x7F; | |
| } | |
| static int atom_get_turbo_pstate(void) | |
| { | |
| u64 value; | |
| rdmsrl(MSR_ATOM_CORE_TURBO_RATIOS, value); | |
| return value & 0x7F; | |
| } | |
| static u64 atom_get_val(struct cpudata *cpudata, int pstate) | |
| { | |
| u64 val; | |
| int32_t vid_fp; | |
| u32 vid; | |
| val = (u64)pstate << 8; | |
| if (limits->no_turbo && !limits->turbo_disabled) | |
| val |= (u64)1 << 32; | |
| vid_fp = cpudata->vid.min + mul_fp( | |
| int_tofp(pstate - cpudata->pstate.min_pstate), | |
| cpudata->vid.ratio); | |
| vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max); | |
| vid = ceiling_fp(vid_fp); | |
| if (pstate > cpudata->pstate.max_pstate) | |
| vid = cpudata->vid.turbo; | |
| return val | vid; | |
| } | |
| static int silvermont_get_scaling(void) | |
| { | |
| u64 value; | |
| int i; | |
| /* Defined in Table 35-6 from SDM (Sept 2015) */ | |
| static int silvermont_freq_table[] = { | |
| 83300, 100000, 133300, 116700, 80000}; | |
| rdmsrl(MSR_FSB_FREQ, value); | |
| i = value & 0x7; | |
| WARN_ON(i > 4); | |
| return silvermont_freq_table[i]; | |
| } | |
| static int airmont_get_scaling(void) | |
| { | |
| u64 value; | |
| int i; | |
| /* Defined in Table 35-10 from SDM (Sept 2015) */ | |
| static int airmont_freq_table[] = { | |
| 83300, 100000, 133300, 116700, 80000, | |
| 93300, 90000, 88900, 87500}; | |
| rdmsrl(MSR_FSB_FREQ, value); | |
| i = value & 0xF; | |
| WARN_ON(i > 8); | |
| return airmont_freq_table[i]; | |
| } | |
| static void atom_get_vid(struct cpudata *cpudata) | |
| { | |
| u64 value; | |
| rdmsrl(MSR_ATOM_CORE_VIDS, value); | |
| cpudata->vid.min = int_tofp((value >> 8) & 0x7f); | |
| cpudata->vid.max = int_tofp((value >> 16) & 0x7f); | |
| cpudata->vid.ratio = div_fp( | |
| cpudata->vid.max - cpudata->vid.min, | |
| int_tofp(cpudata->pstate.max_pstate - | |
| cpudata->pstate.min_pstate)); | |
| rdmsrl(MSR_ATOM_CORE_TURBO_VIDS, value); | |
| cpudata->vid.turbo = value & 0x7f; | |
| } | |
| static int core_get_min_pstate(void) | |
| { | |
| u64 value; | |
| rdmsrl(MSR_PLATFORM_INFO, value); | |
| return (value >> 40) & 0xFF; | |
| } | |
| static int core_get_max_pstate_physical(void) | |
| { | |
| u64 value; | |
| rdmsrl(MSR_PLATFORM_INFO, value); | |
| return (value >> 8) & 0xFF; | |
| } | |
| static int core_get_tdp_ratio(u64 plat_info) | |
| { | |
| /* Check how many TDP levels present */ | |
| if (plat_info & 0x600000000) { | |
| u64 tdp_ctrl; | |
| u64 tdp_ratio; | |
| int tdp_msr; | |
| int err; | |
| /* Get the TDP level (0, 1, 2) to get ratios */ | |
| err = rdmsrl_safe(MSR_CONFIG_TDP_CONTROL, &tdp_ctrl); | |
| if (err) | |
| return err; | |
| /* TDP MSR are continuous starting at 0x648 */ | |
| tdp_msr = MSR_CONFIG_TDP_NOMINAL + (tdp_ctrl & 0x03); | |
| err = rdmsrl_safe(tdp_msr, &tdp_ratio); | |
| if (err) | |
| return err; | |
| /* For level 1 and 2, bits[23:16] contain the ratio */ | |
| if (tdp_ctrl & 0x03) | |
| tdp_ratio >>= 16; | |
| tdp_ratio &= 0xff; /* ratios are only 8 bits long */ | |
| pr_debug("tdp_ratio %x\n", (int)tdp_ratio); | |
| return (int)tdp_ratio; | |
| } | |
| return -ENXIO; | |
| } | |
| static int core_get_max_pstate(void) | |
| { | |
| u64 tar; | |
| u64 plat_info; | |
| int max_pstate; | |
| int tdp_ratio; | |
| int err; | |
| rdmsrl(MSR_PLATFORM_INFO, plat_info); | |
| max_pstate = (plat_info >> 8) & 0xFF; | |
| tdp_ratio = core_get_tdp_ratio(plat_info); | |
| if (tdp_ratio <= 0) | |
| return max_pstate; | |
| if (hwp_active) { | |
| /* Turbo activation ratio is not used on HWP platforms */ | |
| return tdp_ratio; | |
| } | |
| err = rdmsrl_safe(MSR_TURBO_ACTIVATION_RATIO, &tar); | |
| if (!err) { | |
| int tar_levels; | |
| /* Do some sanity checking for safety */ | |
| tar_levels = tar & 0xff; | |
| if (tdp_ratio - 1 == tar_levels) { | |
| max_pstate = tar_levels; | |
| pr_debug("max_pstate=TAC %x\n", max_pstate); | |
| } | |
| } | |
| return max_pstate; | |
| } | |
| static int core_get_turbo_pstate(void) | |
| { | |
| u64 value; | |
| int nont, ret; | |
| rdmsrl(MSR_TURBO_RATIO_LIMIT, value); | |
| nont = core_get_max_pstate(); | |
| ret = (value) & 255; | |
| if (ret <= nont) | |
| ret = nont; | |
| return ret; | |
| } | |
| static inline int core_get_scaling(void) | |
| { | |
| return 100000; | |
| } | |
| static u64 core_get_val(struct cpudata *cpudata, int pstate) | |
| { | |
| u64 val; | |
| val = (u64)pstate << 8; | |
| if (limits->no_turbo && !limits->turbo_disabled) | |
| val |= (u64)1 << 32; | |
| return val; | |
| } | |
| static int knl_get_turbo_pstate(void) | |
| { | |
| u64 value; | |
| int nont, ret; | |
| rdmsrl(MSR_TURBO_RATIO_LIMIT, value); | |
| nont = core_get_max_pstate(); | |
| ret = (((value) >> 8) & 0xFF); | |
| if (ret <= nont) | |
| ret = nont; | |
| return ret; | |
| } | |
| static struct cpu_defaults core_params = { | |
| .pid_policy = { | |
| .sample_rate_ms = 10, | |
| .deadband = 0, | |
| .setpoint = 97, | |
| .p_gain_pct = 20, | |
| .d_gain_pct = 0, | |
| .i_gain_pct = 0, | |
| }, | |
| .funcs = { | |
| .get_max = core_get_max_pstate, | |
| .get_max_physical = core_get_max_pstate_physical, | |
| .get_min = core_get_min_pstate, | |
| .get_turbo = core_get_turbo_pstate, | |
| .get_scaling = core_get_scaling, | |
| .get_val = core_get_val, | |
| .get_target_pstate = get_target_pstate_use_performance, | |
| }, | |
| }; | |
| static const struct cpu_defaults silvermont_params = { | |
| .pid_policy = { | |
| .sample_rate_ms = 10, | |
| .deadband = 0, | |
| .setpoint = 60, | |
| .p_gain_pct = 14, | |
| .d_gain_pct = 0, | |
| .i_gain_pct = 4, | |
| }, | |
| .funcs = { | |
| .get_max = atom_get_max_pstate, | |
| .get_max_physical = atom_get_max_pstate, | |
| .get_min = atom_get_min_pstate, | |
| .get_turbo = atom_get_turbo_pstate, | |
| .get_val = atom_get_val, | |
| .get_scaling = silvermont_get_scaling, | |
| .get_vid = atom_get_vid, | |
| .get_target_pstate = get_target_pstate_use_cpu_load, | |
| }, | |
| }; | |
| static const struct cpu_defaults airmont_params = { | |
| .pid_policy = { | |
| .sample_rate_ms = 10, | |
| .deadband = 0, | |
| .setpoint = 60, | |
| .p_gain_pct = 14, | |
| .d_gain_pct = 0, | |
| .i_gain_pct = 4, | |
| }, | |
| .funcs = { | |
| .get_max = atom_get_max_pstate, | |
| .get_max_physical = atom_get_max_pstate, | |
| .get_min = atom_get_min_pstate, | |
| .get_turbo = atom_get_turbo_pstate, | |
| .get_val = atom_get_val, | |
| .get_scaling = airmont_get_scaling, | |
| .get_vid = atom_get_vid, | |
| .get_target_pstate = get_target_pstate_use_cpu_load, | |
| }, | |
| }; | |
| static const struct cpu_defaults knl_params = { | |
| .pid_policy = { | |
| .sample_rate_ms = 10, | |
| .deadband = 0, | |
| .setpoint = 97, | |
| .p_gain_pct = 20, | |
| .d_gain_pct = 0, | |
| .i_gain_pct = 0, | |
| }, | |
| .funcs = { | |
| .get_max = core_get_max_pstate, | |
| .get_max_physical = core_get_max_pstate_physical, | |
| .get_min = core_get_min_pstate, | |
| .get_turbo = knl_get_turbo_pstate, | |
| .get_scaling = core_get_scaling, | |
| .get_val = core_get_val, | |
| .get_target_pstate = get_target_pstate_use_performance, | |
| }, | |
| }; | |
| static const struct cpu_defaults bxt_params = { | |
| .pid_policy = { | |
| .sample_rate_ms = 10, | |
| .deadband = 0, | |
| .setpoint = 60, | |
| .p_gain_pct = 14, | |
| .d_gain_pct = 0, | |
| .i_gain_pct = 4, | |
| }, | |
| .funcs = { | |
| .get_max = core_get_max_pstate, | |
| .get_max_physical = core_get_max_pstate_physical, | |
| .get_min = core_get_min_pstate, | |
| .get_turbo = core_get_turbo_pstate, | |
| .get_scaling = core_get_scaling, | |
| .get_val = core_get_val, | |
| .get_target_pstate = get_target_pstate_use_cpu_load, | |
| }, | |
| }; | |
| static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) | |
| { | |
| int max_perf = cpu->pstate.turbo_pstate; | |
| int max_perf_adj; | |
| int min_perf; | |
| struct perf_limits *perf_limits = limits; | |
| if (limits->no_turbo || limits->turbo_disabled) | |
| max_perf = cpu->pstate.max_pstate; | |
| if (per_cpu_limits) | |
| perf_limits = cpu->perf_limits; | |
| /* | |
| * performance can be limited by user through sysfs, by cpufreq | |
| * policy, or by cpu specific default values determined through | |
| * experimentation. | |
| */ | |
| max_perf_adj = fp_ext_toint(max_perf * perf_limits->max_perf); | |
| *max = clamp_t(int, max_perf_adj, | |
| cpu->pstate.min_pstate, cpu->pstate.turbo_pstate); | |
| min_perf = fp_ext_toint(max_perf * perf_limits->min_perf); | |
| *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf); | |
| } | |
| static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) | |
| { | |
| trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu); | |
| cpu->pstate.current_pstate = pstate; | |
| /* | |
| * Generally, there is no guarantee that this code will always run on | |
| * the CPU being updated, so force the register update to run on the | |
| * right CPU. | |
| */ | |
| wrmsrl_on_cpu(cpu->cpu, MSR_IA32_PERF_CTL, | |
| pstate_funcs.get_val(cpu, pstate)); | |
| } | |
| static void intel_pstate_set_min_pstate(struct cpudata *cpu) | |
| { | |
| intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); | |
| } | |
| static void intel_pstate_max_within_limits(struct cpudata *cpu) | |
| { | |
| int min_pstate, max_pstate; | |
| update_turbo_state(); | |
| intel_pstate_get_min_max(cpu, &min_pstate, &max_pstate); | |
| intel_pstate_set_pstate(cpu, max_pstate); | |
| } | |
| static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) | |
| { | |
| cpu->pstate.min_pstate = pstate_funcs.get_min(); | |
| cpu->pstate.max_pstate = pstate_funcs.get_max(); | |
| cpu->pstate.max_pstate_physical = pstate_funcs.get_max_physical(); | |
| cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); | |
| cpu->pstate.scaling = pstate_funcs.get_scaling(); | |
| cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; | |
| cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; | |
| if (pstate_funcs.get_vid) | |
| pstate_funcs.get_vid(cpu); | |
| intel_pstate_set_min_pstate(cpu); | |
| } | |
| static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu) | |
| { | |
| struct sample *sample = &cpu->sample; | |
| sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf); | |
| } | |
| static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) | |
| { | |
| u64 aperf, mperf; | |
| unsigned long flags; | |
| u64 tsc; | |
| local_irq_save(flags); | |
| rdmsrl(MSR_IA32_APERF, aperf); | |
| rdmsrl(MSR_IA32_MPERF, mperf); | |
| tsc = rdtsc(); | |
| if (cpu->prev_mperf == mperf || cpu->prev_tsc == tsc) { | |
| local_irq_restore(flags); | |
| return false; | |
| } | |
| local_irq_restore(flags); | |
| cpu->last_sample_time = cpu->sample.time; | |
| cpu->sample.time = time; | |
| cpu->sample.aperf = aperf; | |
| cpu->sample.mperf = mperf; | |
| cpu->sample.tsc = tsc; | |
| cpu->sample.aperf -= cpu->prev_aperf; | |
| cpu->sample.mperf -= cpu->prev_mperf; | |
| cpu->sample.tsc -= cpu->prev_tsc; | |
| cpu->prev_aperf = aperf; | |
| cpu->prev_mperf = mperf; | |
| cpu->prev_tsc = tsc; | |
| /* | |
| * First time this function is invoked in a given cycle, all of the | |
| * previous sample data fields are equal to zero or stale and they must | |
| * be populated with meaningful numbers for things to work, so assume | |
| * that sample.time will always be reset before setting the utilization | |
| * update hook and make the caller skip the sample then. | |
| */ | |
| return !!cpu->last_sample_time; | |
| } | |
| static inline int32_t get_avg_frequency(struct cpudata *cpu) | |
| { | |
| return mul_ext_fp(cpu->sample.core_avg_perf, | |
| cpu->pstate.max_pstate_physical * cpu->pstate.scaling); | |
| } | |
| static inline int32_t get_avg_pstate(struct cpudata *cpu) | |
| { | |
| return mul_ext_fp(cpu->pstate.max_pstate_physical, | |
| cpu->sample.core_avg_perf); | |
| } | |
| static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu) | |
| { | |
| struct sample *sample = &cpu->sample; | |
| int32_t busy_frac, boost; | |
| int target, avg_pstate; | |
| busy_frac = div_fp(sample->mperf, sample->tsc); | |
| boost = cpu->iowait_boost; | |
| cpu->iowait_boost >>= 1; | |
| if (busy_frac < boost) | |
| busy_frac = boost; | |
| sample->busy_scaled = busy_frac * 100; | |
| target = limits->no_turbo || limits->turbo_disabled ? | |
| cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; | |
| target += target >> 2; | |
| target = mul_fp(target, busy_frac); | |
| if (target < cpu->pstate.min_pstate) | |
| target = cpu->pstate.min_pstate; | |
| /* | |
| * If the average P-state during the previous cycle was higher than the | |
| * current target, add 50% of the difference to the target to reduce | |
| * possible performance oscillations and offset possible performance | |
| * loss related to moving the workload from one CPU to another within | |
| * a package/module. | |
| */ | |
| avg_pstate = get_avg_pstate(cpu); | |
| if (avg_pstate > target) | |
| target += (avg_pstate - target) >> 1; | |
| return target; | |
| } | |
| static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) | |
| { | |
| int32_t perf_scaled, max_pstate, current_pstate, sample_ratio; | |
| u64 duration_ns; | |
| /* | |
| * perf_scaled is the ratio of the average P-state during the last | |
| * sampling period to the P-state requested last time (in percent). | |
| * | |
| * That measures the system's response to the previous P-state | |
| * selection. | |
| */ | |
| max_pstate = cpu->pstate.max_pstate_physical; | |
| current_pstate = cpu->pstate.current_pstate; | |
| perf_scaled = mul_ext_fp(cpu->sample.core_avg_perf, | |
| div_fp(100 * max_pstate, current_pstate)); | |
| /* | |
| * Since our utilization update callback will not run unless we are | |
| * in C0, check if the actual elapsed time is significantly greater (3x) | |
| * than our sample interval. If it is, then we were idle for a long | |
| * enough period of time to adjust our performance metric. | |
| */ | |
| duration_ns = cpu->sample.time - cpu->last_sample_time; | |
| if ((s64)duration_ns > pid_params.sample_rate_ns * 3) { | |
| sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns); | |
| perf_scaled = mul_fp(perf_scaled, sample_ratio); | |
| } else { | |
| sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc); | |
| if (sample_ratio < int_tofp(1)) | |
| perf_scaled = 0; | |
| } | |
| cpu->sample.busy_scaled = perf_scaled; | |
| return cpu->pstate.current_pstate - pid_calc(&cpu->pid, perf_scaled); | |
| } | |
| static int intel_pstate_prepare_request(struct cpudata *cpu, int pstate) | |
| { | |
| int max_perf, min_perf; | |
| intel_pstate_get_min_max(cpu, &min_perf, &max_perf); | |
| pstate = clamp_t(int, pstate, min_perf, max_perf); | |
| return pstate; | |
| } | |
| static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) | |
| { | |
| if (pstate == cpu->pstate.current_pstate) | |
| return; | |
| cpu->pstate.current_pstate = pstate; | |
| wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate)); | |
| } | |
| static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) | |
| { | |
| int from, target_pstate; | |
| struct sample *sample; | |
| from = cpu->pstate.current_pstate; | |
| target_pstate = cpu->policy == CPUFREQ_POLICY_PERFORMANCE ? | |
| cpu->pstate.turbo_pstate : pstate_funcs.get_target_pstate(cpu); | |
| update_turbo_state(); | |
| target_pstate = intel_pstate_prepare_request(cpu, target_pstate); | |
| trace_cpu_frequency(target_pstate * cpu->pstate.scaling, cpu->cpu); | |
| intel_pstate_update_pstate(cpu, target_pstate); | |
| sample = &cpu->sample; | |
| trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf), | |
| fp_toint(sample->busy_scaled), | |
| from, | |
| cpu->pstate.current_pstate, | |
| sample->mperf, | |
| sample->aperf, | |
| sample->tsc, | |
| get_avg_frequency(cpu), | |
| fp_toint(cpu->iowait_boost * 100)); | |
| } | |
| static void intel_pstate_update_util(struct update_util_data *data, u64 time, | |
| unsigned int flags) | |
| { | |
| struct cpudata *cpu = container_of(data, struct cpudata, update_util); | |
| u64 delta_ns; | |
| if (pstate_funcs.get_target_pstate == get_target_pstate_use_cpu_load) { | |
| if (flags & SCHED_CPUFREQ_IOWAIT) { | |
| cpu->iowait_boost = int_tofp(1); | |
| } else if (cpu->iowait_boost) { | |
| /* Clear iowait_boost if the CPU may have been idle. */ | |
| delta_ns = time - cpu->last_update; | |
| if (delta_ns > TICK_NSEC) | |
| cpu->iowait_boost = 0; | |
| } | |
| cpu->last_update = time; | |
| } | |
| delta_ns = time - cpu->sample.time; | |
| if ((s64)delta_ns >= pid_params.sample_rate_ns) { | |
| bool sample_taken = intel_pstate_sample(cpu, time); | |
| if (sample_taken) { | |
| intel_pstate_calc_avg_perf(cpu); | |
| if (!hwp_active) | |
| intel_pstate_adjust_busy_pstate(cpu); | |
| } | |
| } | |
| } | |
| #define ICPU(model, policy) \ | |
| { X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\ | |
| (unsigned long)&policy } | |
| static const struct x86_cpu_id intel_pstate_cpu_ids[] = { | |
| ICPU(INTEL_FAM6_SANDYBRIDGE, core_params), | |
| ICPU(INTEL_FAM6_SANDYBRIDGE_X, core_params), | |
| ICPU(INTEL_FAM6_ATOM_SILVERMONT1, silvermont_params), | |
| ICPU(INTEL_FAM6_IVYBRIDGE, core_params), | |
| ICPU(INTEL_FAM6_HASWELL_CORE, core_params), | |
| ICPU(INTEL_FAM6_BROADWELL_CORE, core_params), | |
| ICPU(INTEL_FAM6_IVYBRIDGE_X, core_params), | |
| ICPU(INTEL_FAM6_HASWELL_X, core_params), | |
| ICPU(INTEL_FAM6_HASWELL_ULT, core_params), | |
| ICPU(INTEL_FAM6_HASWELL_GT3E, core_params), | |
| ICPU(INTEL_FAM6_BROADWELL_GT3E, core_params), | |
| ICPU(INTEL_FAM6_ATOM_AIRMONT, airmont_params), | |
| ICPU(INTEL_FAM6_SKYLAKE_MOBILE, core_params), | |
| ICPU(INTEL_FAM6_BROADWELL_X, core_params), | |
| ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_params), | |
| ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), | |
| ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_params), | |
| ICPU(INTEL_FAM6_XEON_PHI_KNM, knl_params), | |
| ICPU(INTEL_FAM6_ATOM_GOLDMONT, bxt_params), | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); | |
| static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = { | |
| ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), | |
| ICPU(INTEL_FAM6_BROADWELL_X, core_params), | |
| ICPU(INTEL_FAM6_SKYLAKE_X, core_params), | |
| {} | |
| }; | |
| static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = { | |
| ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, core_params), | |
| {} | |
| }; | |
| static int intel_pstate_init_cpu(unsigned int cpunum) | |
| { | |
| struct cpudata *cpu; | |
| cpu = all_cpu_data[cpunum]; | |
| if (!cpu) { | |
| unsigned int size = sizeof(struct cpudata); | |
| if (per_cpu_limits) | |
| size += sizeof(struct perf_limits); | |
| cpu = kzalloc(size, GFP_KERNEL); | |
| if (!cpu) | |
| return -ENOMEM; | |
| all_cpu_data[cpunum] = cpu; | |
| if (per_cpu_limits) | |
| cpu->perf_limits = (struct perf_limits *)(cpu + 1); | |
| cpu->epp_default = -EINVAL; | |
| cpu->epp_powersave = -EINVAL; | |
| cpu->epp_saved = -EINVAL; | |
| } | |
| cpu = all_cpu_data[cpunum]; | |
| cpu->cpu = cpunum; | |
| if (hwp_active) { | |
| const struct x86_cpu_id *id; | |
| id = x86_match_cpu(intel_pstate_cpu_ee_disable_ids); | |
| if (id) | |
| intel_pstate_disable_ee(cpunum); | |
| intel_pstate_hwp_enable(cpu); | |
| pid_params.sample_rate_ms = 50; | |
| pid_params.sample_rate_ns = 50 * NSEC_PER_MSEC; | |
| } | |
| intel_pstate_get_cpu_pstates(cpu); | |
| intel_pstate_busy_pid_reset(cpu); | |
| pr_debug("controlling: cpu %d\n", cpunum); | |
| return 0; | |
| } | |
| static unsigned int intel_pstate_get(unsigned int cpu_num) | |
| { | |
| struct cpudata *cpu = all_cpu_data[cpu_num]; | |
| return cpu ? get_avg_frequency(cpu) : 0; | |
| } | |
| static void intel_pstate_set_update_util_hook(unsigned int cpu_num) | |
| { | |
| struct cpudata *cpu = all_cpu_data[cpu_num]; | |
| if (cpu->update_util_set) | |
| return; | |
| /* Prevent intel_pstate_update_util() from using stale data. */ | |
| cpu->sample.time = 0; | |
| cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, | |
| intel_pstate_update_util); | |
| cpu->update_util_set = true; | |
| } | |
| static void intel_pstate_clear_update_util_hook(unsigned int cpu) | |
| { | |
| struct cpudata *cpu_data = all_cpu_data[cpu]; | |
| if (!cpu_data->update_util_set) | |
| return; | |
| cpufreq_remove_update_util_hook(cpu); | |
| cpu_data->update_util_set = false; | |
| synchronize_sched(); | |
| } | |
| static void intel_pstate_update_perf_limits(struct cpufreq_policy *policy, | |
| struct perf_limits *limits) | |
| { | |
| limits->max_policy_pct = DIV_ROUND_UP(policy->max * 100, | |
| policy->cpuinfo.max_freq); | |
| limits->max_policy_pct = clamp_t(int, limits->max_policy_pct, 0, 100); | |
| if (policy->max == policy->min) { | |
| limits->min_policy_pct = limits->max_policy_pct; | |
| } else { | |
| limits->min_policy_pct = DIV_ROUND_UP(policy->min * 100, | |
| policy->cpuinfo.max_freq); | |
| limits->min_policy_pct = clamp_t(int, limits->min_policy_pct, | |
| 0, 100); | |
| } | |
| /* Normalize user input to [min_policy_pct, max_policy_pct] */ | |
| limits->min_perf_pct = max(limits->min_policy_pct, | |
| limits->min_sysfs_pct); | |
| limits->min_perf_pct = min(limits->max_policy_pct, | |
| limits->min_perf_pct); | |
| limits->max_perf_pct = min(limits->max_policy_pct, | |
| limits->max_sysfs_pct); | |
| limits->max_perf_pct = max(limits->min_policy_pct, | |
| limits->max_perf_pct); | |
| /* Make sure min_perf_pct <= max_perf_pct */ | |
| limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct); | |
| limits->min_perf = div_ext_fp(limits->min_perf_pct, 100); | |
| limits->max_perf = div_ext_fp(limits->max_perf_pct, 100); | |
| limits->max_perf = round_up(limits->max_perf, EXT_FRAC_BITS); | |
| limits->min_perf = round_up(limits->min_perf, EXT_FRAC_BITS); | |
| pr_debug("cpu:%d max_perf_pct:%d min_perf_pct:%d\n", policy->cpu, | |
| limits->max_perf_pct, limits->min_perf_pct); | |
| } | |
| static int intel_pstate_set_policy(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu; | |
| struct perf_limits *perf_limits = NULL; | |
| if (!policy->cpuinfo.max_freq) | |
| return -ENODEV; | |
| pr_debug("set_policy cpuinfo.max %u policy->max %u\n", | |
| policy->cpuinfo.max_freq, policy->max); | |
| cpu = all_cpu_data[policy->cpu]; | |
| cpu->policy = policy->policy; | |
| if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate && | |
| policy->max < policy->cpuinfo.max_freq && | |
| policy->max > cpu->pstate.max_pstate * cpu->pstate.scaling) { | |
| pr_debug("policy->max > max non turbo frequency\n"); | |
| policy->max = policy->cpuinfo.max_freq; | |
| } | |
| if (per_cpu_limits) | |
| perf_limits = cpu->perf_limits; | |
| mutex_lock(&intel_pstate_limits_lock); | |
| if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { | |
| pr_debug("set performance\n"); | |
| if (!perf_limits) { | |
| limits = &performance_limits; | |
| perf_limits = limits; | |
| } | |
| } else { | |
| pr_debug("set powersave\n"); | |
| if (!perf_limits) { | |
| limits = &powersave_limits; | |
| perf_limits = limits; | |
| } | |
| } | |
| intel_pstate_update_perf_limits(policy, perf_limits); | |
| if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) { | |
| /* | |
| * NOHZ_FULL CPUs need this as the governor callback may not | |
| * be invoked on them. | |
| */ | |
| intel_pstate_clear_update_util_hook(policy->cpu); | |
| intel_pstate_max_within_limits(cpu); | |
| } | |
| intel_pstate_set_update_util_hook(policy->cpu); | |
| intel_pstate_hwp_set_policy(policy); | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| return 0; | |
| } | |
| static int intel_pstate_verify_policy(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; | |
| struct perf_limits *perf_limits; | |
| if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) | |
| perf_limits = &performance_limits; | |
| else | |
| perf_limits = &powersave_limits; | |
| update_turbo_state(); | |
| policy->cpuinfo.max_freq = perf_limits->turbo_disabled || | |
| perf_limits->no_turbo ? | |
| cpu->pstate.max_freq : | |
| cpu->pstate.turbo_freq; | |
| cpufreq_verify_within_cpu_limits(policy); | |
| if (policy->policy != CPUFREQ_POLICY_POWERSAVE && | |
| policy->policy != CPUFREQ_POLICY_PERFORMANCE) | |
| return -EINVAL; | |
| /* When per-CPU limits are used, sysfs limits are not used */ | |
| if (!per_cpu_limits) { | |
| unsigned int max_freq, min_freq; | |
| max_freq = policy->cpuinfo.max_freq * | |
| perf_limits->max_sysfs_pct / 100; | |
| min_freq = policy->cpuinfo.max_freq * | |
| perf_limits->min_sysfs_pct / 100; | |
| cpufreq_verify_within_limits(policy, min_freq, max_freq); | |
| } | |
| return 0; | |
| } | |
| static void intel_cpufreq_stop_cpu(struct cpufreq_policy *policy) | |
| { | |
| intel_pstate_set_min_pstate(all_cpu_data[policy->cpu]); | |
| } | |
| static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) | |
| { | |
| pr_debug("CPU %d exiting\n", policy->cpu); | |
| intel_pstate_clear_update_util_hook(policy->cpu); | |
| if (hwp_active) | |
| intel_pstate_hwp_save_state(policy); | |
| else | |
| intel_cpufreq_stop_cpu(policy); | |
| } | |
| static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) | |
| { | |
| intel_pstate_exit_perf_limits(policy); | |
| policy->fast_switch_possible = false; | |
| return 0; | |
| } | |
| static int __intel_pstate_cpu_init(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu; | |
| int rc; | |
| rc = intel_pstate_init_cpu(policy->cpu); | |
| if (rc) | |
| return rc; | |
| cpu = all_cpu_data[policy->cpu]; | |
| if (per_cpu_limits) | |
| intel_pstate_init_limits(cpu->perf_limits); | |
| policy->min = cpu->pstate.min_pstate * cpu->pstate.scaling; | |
| policy->max = cpu->pstate.turbo_pstate * cpu->pstate.scaling; | |
| /* cpuinfo and default policy values */ | |
| policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; | |
| update_turbo_state(); | |
| policy->cpuinfo.max_freq = limits->turbo_disabled ? | |
| cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; | |
| policy->cpuinfo.max_freq *= cpu->pstate.scaling; | |
| intel_pstate_init_acpi_perf_limits(policy); | |
| cpumask_set_cpu(policy->cpu, policy->cpus); | |
| policy->fast_switch_possible = true; | |
| return 0; | |
| } | |
| static int intel_pstate_cpu_init(struct cpufreq_policy *policy) | |
| { | |
| int ret = __intel_pstate_cpu_init(policy); | |
| if (ret) | |
| return ret; | |
| policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; | |
| if (limits->min_perf_pct == 100 && limits->max_perf_pct == 100) | |
| policy->policy = CPUFREQ_POLICY_PERFORMANCE; | |
| else | |
| policy->policy = CPUFREQ_POLICY_POWERSAVE; | |
| return 0; | |
| } | |
| static struct cpufreq_driver intel_pstate = { | |
| .flags = CPUFREQ_CONST_LOOPS, | |
| .verify = intel_pstate_verify_policy, | |
| .setpolicy = intel_pstate_set_policy, | |
| .suspend = intel_pstate_hwp_save_state, | |
| .resume = intel_pstate_resume, | |
| .get = intel_pstate_get, | |
| .init = intel_pstate_cpu_init, | |
| .exit = intel_pstate_cpu_exit, | |
| .stop_cpu = intel_pstate_stop_cpu, | |
| .name = "intel_pstate", | |
| }; | |
| static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy) | |
| { | |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; | |
| update_turbo_state(); | |
| policy->cpuinfo.max_freq = limits->turbo_disabled ? | |
| cpu->pstate.max_freq : cpu->pstate.turbo_freq; | |
| cpufreq_verify_within_cpu_limits(policy); | |
| return 0; | |
| } | |
| static unsigned int intel_cpufreq_turbo_update(struct cpudata *cpu, | |
| struct cpufreq_policy *policy, | |
| unsigned int target_freq) | |
| { | |
| unsigned int max_freq; | |
| update_turbo_state(); | |
| max_freq = limits->no_turbo || limits->turbo_disabled ? | |
| cpu->pstate.max_freq : cpu->pstate.turbo_freq; | |
| policy->cpuinfo.max_freq = max_freq; | |
| if (policy->max > max_freq) | |
| policy->max = max_freq; | |
| if (target_freq > max_freq) | |
| target_freq = max_freq; | |
| return target_freq; | |
| } | |
| static int intel_cpufreq_target(struct cpufreq_policy *policy, | |
| unsigned int target_freq, | |
| unsigned int relation) | |
| { | |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; | |
| struct cpufreq_freqs freqs; | |
| int target_pstate; | |
| freqs.old = policy->cur; | |
| freqs.new = intel_cpufreq_turbo_update(cpu, policy, target_freq); | |
| cpufreq_freq_transition_begin(policy, &freqs); | |
| switch (relation) { | |
| case CPUFREQ_RELATION_L: | |
| target_pstate = DIV_ROUND_UP(freqs.new, cpu->pstate.scaling); | |
| break; | |
| case CPUFREQ_RELATION_H: | |
| target_pstate = freqs.new / cpu->pstate.scaling; | |
| break; | |
| default: | |
| target_pstate = DIV_ROUND_CLOSEST(freqs.new, cpu->pstate.scaling); | |
| break; | |
| } | |
| target_pstate = intel_pstate_prepare_request(cpu, target_pstate); | |
| if (target_pstate != cpu->pstate.current_pstate) { | |
| cpu->pstate.current_pstate = target_pstate; | |
| wrmsrl_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, | |
| pstate_funcs.get_val(cpu, target_pstate)); | |
| } | |
| freqs.new = target_pstate * cpu->pstate.scaling; | |
| cpufreq_freq_transition_end(policy, &freqs, false); | |
| return 0; | |
| } | |
| static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy, | |
| unsigned int target_freq) | |
| { | |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; | |
| int target_pstate; | |
| target_freq = intel_cpufreq_turbo_update(cpu, policy, target_freq); | |
| target_pstate = DIV_ROUND_UP(target_freq, cpu->pstate.scaling); | |
| target_pstate = intel_pstate_prepare_request(cpu, target_pstate); | |
| intel_pstate_update_pstate(cpu, target_pstate); | |
| return target_pstate * cpu->pstate.scaling; | |
| } | |
| static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy) | |
| { | |
| int ret = __intel_pstate_cpu_init(policy); | |
| if (ret) | |
| return ret; | |
| policy->cpuinfo.transition_latency = INTEL_CPUFREQ_TRANSITION_LATENCY; | |
| /* This reflects the intel_pstate_get_cpu_pstates() setting. */ | |
| policy->cur = policy->cpuinfo.min_freq; | |
| return 0; | |
| } | |
| static struct cpufreq_driver intel_cpufreq = { | |
| .flags = CPUFREQ_CONST_LOOPS, | |
| .verify = intel_cpufreq_verify_policy, | |
| .target = intel_cpufreq_target, | |
| .fast_switch = intel_cpufreq_fast_switch, | |
| .init = intel_cpufreq_cpu_init, | |
| .exit = intel_pstate_cpu_exit, | |
| .stop_cpu = intel_cpufreq_stop_cpu, | |
| .name = "intel_cpufreq", | |
| }; | |
| static struct cpufreq_driver *intel_pstate_driver = &intel_pstate; | |
| static void intel_pstate_driver_cleanup(void) | |
| { | |
| unsigned int cpu; | |
| get_online_cpus(); | |
| for_each_online_cpu(cpu) { | |
| if (all_cpu_data[cpu]) { | |
| if (intel_pstate_driver == &intel_pstate) | |
| intel_pstate_clear_update_util_hook(cpu); | |
| kfree(all_cpu_data[cpu]); | |
| all_cpu_data[cpu] = NULL; | |
| } | |
| } | |
| put_online_cpus(); | |
| } | |
| static int intel_pstate_register_driver(void) | |
| { | |
| int ret; | |
| intel_pstate_init_limits(&powersave_limits); | |
| intel_pstate_set_performance_limits(&performance_limits); | |
| if (IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE) && | |
| intel_pstate_driver == &intel_pstate) | |
| limits = &performance_limits; | |
| else | |
| limits = &powersave_limits; | |
| ret = cpufreq_register_driver(intel_pstate_driver); | |
| if (ret) { | |
| intel_pstate_driver_cleanup(); | |
| return ret; | |
| } | |
| mutex_lock(&intel_pstate_limits_lock); | |
| driver_registered = true; | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| if (intel_pstate_driver == &intel_pstate && !hwp_active && | |
| pstate_funcs.get_target_pstate != get_target_pstate_use_cpu_load) | |
| intel_pstate_debug_expose_params(); | |
| return 0; | |
| } | |
| static int intel_pstate_unregister_driver(void) | |
| { | |
| if (hwp_active) | |
| return -EBUSY; | |
| if (intel_pstate_driver == &intel_pstate && !hwp_active && | |
| pstate_funcs.get_target_pstate != get_target_pstate_use_cpu_load) | |
| intel_pstate_debug_hide_params(); | |
| mutex_lock(&intel_pstate_limits_lock); | |
| driver_registered = false; | |
| mutex_unlock(&intel_pstate_limits_lock); | |
| cpufreq_unregister_driver(intel_pstate_driver); | |
| intel_pstate_driver_cleanup(); | |
| return 0; | |
| } | |
| static ssize_t intel_pstate_show_status(char *buf) | |
| { | |
| if (!driver_registered) | |
| return sprintf(buf, "off\n"); | |
| return sprintf(buf, "%s\n", intel_pstate_driver == &intel_pstate ? | |
| "active" : "passive"); | |
| } | |
| static int intel_pstate_update_status(const char *buf, size_t size) | |
| { | |
| int ret; | |
| if (size == 3 && !strncmp(buf, "off", size)) | |
| return driver_registered ? | |
| intel_pstate_unregister_driver() : -EINVAL; | |
| if (size == 6 && !strncmp(buf, "active", size)) { | |
| if (driver_registered) { | |
| if (intel_pstate_driver == &intel_pstate) | |
| return 0; | |
| ret = intel_pstate_unregister_driver(); | |
| if (ret) | |
| return ret; | |
| } | |
| intel_pstate_driver = &intel_pstate; | |
| return intel_pstate_register_driver(); | |
| } | |
| if (size == 7 && !strncmp(buf, "passive", size)) { | |
| if (driver_registered) { | |
| if (intel_pstate_driver != &intel_pstate) | |
| return 0; | |
| ret = intel_pstate_unregister_driver(); | |
| if (ret) | |
| return ret; | |
| } | |
| intel_pstate_driver = &intel_cpufreq; | |
| return intel_pstate_register_driver(); | |
| } | |
| return -EINVAL; | |
| } | |
| static int no_load __initdata; | |
| static int no_hwp __initdata; | |
| static int hwp_only __initdata; | |
| static unsigned int force_load __initdata; | |
| static int __init intel_pstate_msrs_not_valid(void) | |
| { | |
| if (!pstate_funcs.get_max() || | |
| !pstate_funcs.get_min() || | |
| !pstate_funcs.get_turbo()) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static void __init copy_pid_params(struct pstate_adjust_policy *policy) | |
| { | |
| pid_params.sample_rate_ms = policy->sample_rate_ms; | |
| pid_params.sample_rate_ns = pid_params.sample_rate_ms * NSEC_PER_MSEC; | |
| pid_params.p_gain_pct = policy->p_gain_pct; | |
| pid_params.i_gain_pct = policy->i_gain_pct; | |
| pid_params.d_gain_pct = policy->d_gain_pct; | |
| pid_params.deadband = policy->deadband; | |
| pid_params.setpoint = policy->setpoint; | |
| } | |
| #ifdef CONFIG_ACPI | |
| static void intel_pstate_use_acpi_profile(void) | |
| { | |
| if (acpi_gbl_FADT.preferred_profile == PM_MOBILE) | |
| pstate_funcs.get_target_pstate = | |
| get_target_pstate_use_cpu_load; | |
| } | |
| #else | |
| static void intel_pstate_use_acpi_profile(void) | |
| { | |
| } | |
| #endif | |
| static void __init copy_cpu_funcs(struct pstate_funcs *funcs) | |
| { | |
| pstate_funcs.get_max = funcs->get_max; | |
| pstate_funcs.get_max_physical = funcs->get_max_physical; | |
| pstate_funcs.get_min = funcs->get_min; | |
| pstate_funcs.get_turbo = funcs->get_turbo; | |
| pstate_funcs.get_scaling = funcs->get_scaling; | |
| pstate_funcs.get_val = funcs->get_val; | |
| pstate_funcs.get_vid = funcs->get_vid; | |
| pstate_funcs.get_target_pstate = funcs->get_target_pstate; | |
| intel_pstate_use_acpi_profile(); | |
| } | |
| #ifdef CONFIG_ACPI | |
| static bool __init intel_pstate_no_acpi_pss(void) | |
| { | |
| int i; | |
| for_each_possible_cpu(i) { | |
| acpi_status status; | |
| union acpi_object *pss; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| struct acpi_processor *pr = per_cpu(processors, i); | |
| if (!pr) | |
| continue; | |
| status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) | |
| continue; | |
| pss = buffer.pointer; | |
| if (pss && pss->type == ACPI_TYPE_PACKAGE) { | |
| kfree(pss); | |
| return false; | |
| } | |
| kfree(pss); | |
| } | |
| return true; | |
| } | |
| static bool __init intel_pstate_has_acpi_ppc(void) | |
| { | |
| int i; | |
| for_each_possible_cpu(i) { | |
| struct acpi_processor *pr = per_cpu(processors, i); | |
| if (!pr) | |
| continue; | |
| if (acpi_has_method(pr->handle, "_PPC")) | |
| return true; | |
| } | |
| return false; | |
| } | |
| enum { | |
| PSS, | |
| PPC, | |
| }; | |
| struct hw_vendor_info { | |
| u16 valid; | |
| char oem_id[ACPI_OEM_ID_SIZE]; | |
| char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; | |
| int oem_pwr_table; | |
| }; | |
| /* Hardware vendor-specific info that has its own power management modes */ | |
| static struct hw_vendor_info vendor_info[] __initdata = { | |
| {1, "HP ", "ProLiant", PSS}, | |
| {1, "ORACLE", "X4-2 ", PPC}, | |
| {1, "ORACLE", "X4-2L ", PPC}, | |
| {1, "ORACLE", "X4-2B ", PPC}, | |
| {1, "ORACLE", "X3-2 ", PPC}, | |
| {1, "ORACLE", "X3-2L ", PPC}, | |
| {1, "ORACLE", "X3-2B ", PPC}, | |
| {1, "ORACLE", "X4470M2 ", PPC}, | |
| {1, "ORACLE", "X4270M3 ", PPC}, | |
| {1, "ORACLE", "X4270M2 ", PPC}, | |
| {1, "ORACLE", "X4170M2 ", PPC}, | |
| {1, "ORACLE", "X4170 M3", PPC}, | |
| {1, "ORACLE", "X4275 M3", PPC}, | |
| {1, "ORACLE", "X6-2 ", PPC}, | |
| {1, "ORACLE", "Sudbury ", PPC}, | |
| {0, "", ""}, | |
| }; | |
| static bool __init intel_pstate_platform_pwr_mgmt_exists(void) | |
| { | |
| struct acpi_table_header hdr; | |
| struct hw_vendor_info *v_info; | |
| const struct x86_cpu_id *id; | |
| u64 misc_pwr; | |
| id = x86_match_cpu(intel_pstate_cpu_oob_ids); | |
| if (id) { | |
| rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr); | |
| if ( misc_pwr & (1 << 8)) | |
| return true; | |
| } | |
| if (acpi_disabled || | |
| ACPI_FAILURE(acpi_get_table_header(ACPI_SIG_FADT, 0, &hdr))) | |
| return false; | |
| for (v_info = vendor_info; v_info->valid; v_info++) { | |
| if (!strncmp(hdr.oem_id, v_info->oem_id, ACPI_OEM_ID_SIZE) && | |
| !strncmp(hdr.oem_table_id, v_info->oem_table_id, | |
| ACPI_OEM_TABLE_ID_SIZE)) | |
| switch (v_info->oem_pwr_table) { | |
| case PSS: | |
| return intel_pstate_no_acpi_pss(); | |
| case PPC: | |
| return intel_pstate_has_acpi_ppc() && | |
| (!force_load); | |
| } | |
| } | |
| return false; | |
| } | |
| static void intel_pstate_request_control_from_smm(void) | |
| { | |
| /* | |
| * It may be unsafe to request P-states control from SMM if _PPC support | |
| * has not been enabled. | |
| */ | |
| if (acpi_ppc) | |
| acpi_processor_pstate_control(); | |
| } | |
| #else /* CONFIG_ACPI not enabled */ | |
| static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; } | |
| static inline bool intel_pstate_has_acpi_ppc(void) { return false; } | |
| static inline void intel_pstate_request_control_from_smm(void) {} | |
| #endif /* CONFIG_ACPI */ | |
| static const struct x86_cpu_id hwp_support_ids[] __initconst = { | |
| { X86_VENDOR_INTEL, 6, X86_MODEL_ANY, X86_FEATURE_HWP }, | |
| {} | |
| }; | |
| static int __init intel_pstate_init(void) | |
| { | |
| const struct x86_cpu_id *id; | |
| struct cpu_defaults *cpu_def; | |
| int rc = 0; | |
| if (no_load) | |
| return -ENODEV; | |
| if (x86_match_cpu(hwp_support_ids) && !no_hwp) { | |
| copy_cpu_funcs(&core_params.funcs); | |
| hwp_active++; | |
| intel_pstate.attr = hwp_cpufreq_attrs; | |
| goto hwp_cpu_matched; | |
| } | |
| id = x86_match_cpu(intel_pstate_cpu_ids); | |
| if (!id) | |
| return -ENODEV; | |
| cpu_def = (struct cpu_defaults *)id->driver_data; | |
| copy_pid_params(&cpu_def->pid_policy); | |
| copy_cpu_funcs(&cpu_def->funcs); | |
| if (intel_pstate_msrs_not_valid()) | |
| return -ENODEV; | |
| hwp_cpu_matched: | |
| /* | |
| * The Intel pstate driver will be ignored if the platform | |
| * firmware has its own power management modes. | |
| */ | |
| if (intel_pstate_platform_pwr_mgmt_exists()) | |
| return -ENODEV; | |
| if (!hwp_active && hwp_only) | |
| return -ENOTSUPP; | |
| pr_info("Intel P-state driver initializing\n"); | |
| all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus()); | |
| if (!all_cpu_data) | |
| return -ENOMEM; | |
| intel_pstate_request_control_from_smm(); | |
| intel_pstate_sysfs_expose_params(); | |
| mutex_lock(&intel_pstate_driver_lock); | |
| rc = intel_pstate_register_driver(); | |
| mutex_unlock(&intel_pstate_driver_lock); | |
| if (rc) | |
| return rc; | |
| if (hwp_active) | |
| pr_info("HWP enabled\n"); | |
| return 0; | |
| } | |
| device_initcall(intel_pstate_init); | |
| static int __init intel_pstate_setup(char *str) | |
| { | |
| if (!str) | |
| return -EINVAL; | |
| if (!strcmp(str, "disable")) { | |
| no_load = 1; | |
| } else if (!strcmp(str, "passive")) { | |
| pr_info("Passive mode enabled\n"); | |
| intel_pstate_driver = &intel_cpufreq; | |
| no_hwp = 1; | |
| } | |
| if (!strcmp(str, "no_hwp")) { | |
| pr_info("HWP disabled\n"); | |
| no_hwp = 1; | |
| } | |
| if (!strcmp(str, "force")) | |
| force_load = 1; | |
| if (!strcmp(str, "hwp_only")) | |
| hwp_only = 1; | |
| if (!strcmp(str, "per_cpu_perf_limits")) | |
| per_cpu_limits = true; | |
| #ifdef CONFIG_ACPI | |
| if (!strcmp(str, "support_acpi_ppc")) | |
| acpi_ppc = true; | |
| #endif | |
| return 0; | |
| } | |
| early_param("intel_pstate", intel_pstate_setup); | |
| MODULE_AUTHOR("Dirk Brandewie <dirk.j.brandewie@intel.com>"); | |
| MODULE_DESCRIPTION("'intel_pstate' - P state driver Intel Core processors"); | |
| MODULE_LICENSE("GPL"); |