| /* | |
| * Generic ring buffer | |
| * | |
| * Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com> | |
| */ | |
| #include <linux/ftrace_event.h> | |
| #include <linux/ring_buffer.h> | |
| #include <linux/trace_clock.h> | |
| #include <linux/trace_seq.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/irq_work.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/kthread.h> /* for self test */ | |
| #include <linux/kmemcheck.h> | |
| #include <linux/module.h> | |
| #include <linux/percpu.h> | |
| #include <linux/mutex.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/hash.h> | |
| #include <linux/list.h> | |
| #include <linux/cpu.h> | |
| #include <linux/fs.h> | |
| #include <asm/local.h> | |
| static void update_pages_handler(struct work_struct *work); | |
| /* | |
| * The ring buffer header is special. We must manually up keep it. | |
| */ | |
| int ring_buffer_print_entry_header(struct trace_seq *s) | |
| { | |
| int ret; | |
| ret = trace_seq_puts(s, "# compressed entry header\n"); | |
| ret = trace_seq_puts(s, "\ttype_len : 5 bits\n"); | |
| ret = trace_seq_puts(s, "\ttime_delta : 27 bits\n"); | |
| ret = trace_seq_puts(s, "\tarray : 32 bits\n"); | |
| ret = trace_seq_putc(s, '\n'); | |
| ret = trace_seq_printf(s, "\tpadding : type == %d\n", | |
| RINGBUF_TYPE_PADDING); | |
| ret = trace_seq_printf(s, "\ttime_extend : type == %d\n", | |
| RINGBUF_TYPE_TIME_EXTEND); | |
| ret = trace_seq_printf(s, "\tdata max type_len == %d\n", | |
| RINGBUF_TYPE_DATA_TYPE_LEN_MAX); | |
| return ret; | |
| } | |
| /* | |
| * The ring buffer is made up of a list of pages. A separate list of pages is | |
| * allocated for each CPU. A writer may only write to a buffer that is | |
| * associated with the CPU it is currently executing on. A reader may read | |
| * from any per cpu buffer. | |
| * | |
| * The reader is special. For each per cpu buffer, the reader has its own | |
| * reader page. When a reader has read the entire reader page, this reader | |
| * page is swapped with another page in the ring buffer. | |
| * | |
| * Now, as long as the writer is off the reader page, the reader can do what | |
| * ever it wants with that page. The writer will never write to that page | |
| * again (as long as it is out of the ring buffer). | |
| * | |
| * Here's some silly ASCII art. | |
| * | |
| * +------+ | |
| * |reader| RING BUFFER | |
| * |page | | |
| * +------+ +---+ +---+ +---+ | |
| * | |-->| |-->| | | |
| * +---+ +---+ +---+ | |
| * ^ | | |
| * | | | |
| * +---------------+ | |
| * | |
| * | |
| * +------+ | |
| * |reader| RING BUFFER | |
| * |page |------------------v | |
| * +------+ +---+ +---+ +---+ | |
| * | |-->| |-->| | | |
| * +---+ +---+ +---+ | |
| * ^ | | |
| * | | | |
| * +---------------+ | |
| * | |
| * | |
| * +------+ | |
| * |reader| RING BUFFER | |
| * |page |------------------v | |
| * +------+ +---+ +---+ +---+ | |
| * ^ | |-->| |-->| | | |
| * | +---+ +---+ +---+ | |
| * | | | |
| * | | | |
| * +------------------------------+ | |
| * | |
| * | |
| * +------+ | |
| * |buffer| RING BUFFER | |
| * |page |------------------v | |
| * +------+ +---+ +---+ +---+ | |
| * ^ | | | |-->| | | |
| * | New +---+ +---+ +---+ | |
| * | Reader------^ | | |
| * | page | | |
| * +------------------------------+ | |
| * | |
| * | |
| * After we make this swap, the reader can hand this page off to the splice | |
| * code and be done with it. It can even allocate a new page if it needs to | |
| * and swap that into the ring buffer. | |
| * | |
| * We will be using cmpxchg soon to make all this lockless. | |
| * | |
| */ | |
| /* | |
| * A fast way to enable or disable all ring buffers is to | |
| * call tracing_on or tracing_off. Turning off the ring buffers | |
| * prevents all ring buffers from being recorded to. | |
| * Turning this switch on, makes it OK to write to the | |
| * ring buffer, if the ring buffer is enabled itself. | |
| * | |
| * There's three layers that must be on in order to write | |
| * to the ring buffer. | |
| * | |
| * 1) This global flag must be set. | |
| * 2) The ring buffer must be enabled for recording. | |
| * 3) The per cpu buffer must be enabled for recording. | |
| * | |
| * In case of an anomaly, this global flag has a bit set that | |
| * will permantly disable all ring buffers. | |
| */ | |
| /* | |
| * Global flag to disable all recording to ring buffers | |
| * This has two bits: ON, DISABLED | |
| * | |
| * ON DISABLED | |
| * ---- ---------- | |
| * 0 0 : ring buffers are off | |
| * 1 0 : ring buffers are on | |
| * X 1 : ring buffers are permanently disabled | |
| */ | |
| enum { | |
| RB_BUFFERS_ON_BIT = 0, | |
| RB_BUFFERS_DISABLED_BIT = 1, | |
| }; | |
| enum { | |
| RB_BUFFERS_ON = 1 << RB_BUFFERS_ON_BIT, | |
| RB_BUFFERS_DISABLED = 1 << RB_BUFFERS_DISABLED_BIT, | |
| }; | |
| static unsigned long ring_buffer_flags __read_mostly = RB_BUFFERS_ON; | |
| /* Used for individual buffers (after the counter) */ | |
| #define RB_BUFFER_OFF (1 << 20) | |
| #define BUF_PAGE_HDR_SIZE offsetof(struct buffer_data_page, data) | |
| /** | |
| * tracing_off_permanent - permanently disable ring buffers | |
| * | |
| * This function, once called, will disable all ring buffers | |
| * permanently. | |
| */ | |
| void tracing_off_permanent(void) | |
| { | |
| set_bit(RB_BUFFERS_DISABLED_BIT, &ring_buffer_flags); | |
| } | |
| #define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array)) | |
| #define RB_ALIGNMENT 4U | |
| #define RB_MAX_SMALL_DATA (RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX) | |
| #define RB_EVNT_MIN_SIZE 8U /* two 32bit words */ | |
| #ifndef CONFIG_HAVE_64BIT_ALIGNED_ACCESS | |
| # define RB_FORCE_8BYTE_ALIGNMENT 0 | |
| # define RB_ARCH_ALIGNMENT RB_ALIGNMENT | |
| #else | |
| # define RB_FORCE_8BYTE_ALIGNMENT 1 | |
| # define RB_ARCH_ALIGNMENT 8U | |
| #endif | |
| #define RB_ALIGN_DATA __aligned(RB_ARCH_ALIGNMENT) | |
| /* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */ | |
| #define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX | |
| enum { | |
| RB_LEN_TIME_EXTEND = 8, | |
| RB_LEN_TIME_STAMP = 16, | |
| }; | |
| #define skip_time_extend(event) \ | |
| ((struct ring_buffer_event *)((char *)event + RB_LEN_TIME_EXTEND)) | |
| static inline int rb_null_event(struct ring_buffer_event *event) | |
| { | |
| return event->type_len == RINGBUF_TYPE_PADDING && !event->time_delta; | |
| } | |
| static void rb_event_set_padding(struct ring_buffer_event *event) | |
| { | |
| /* padding has a NULL time_delta */ | |
| event->type_len = RINGBUF_TYPE_PADDING; | |
| event->time_delta = 0; | |
| } | |
| static unsigned | |
| rb_event_data_length(struct ring_buffer_event *event) | |
| { | |
| unsigned length; | |
| if (event->type_len) | |
| length = event->type_len * RB_ALIGNMENT; | |
| else | |
| length = event->array[0]; | |
| return length + RB_EVNT_HDR_SIZE; | |
| } | |
| /* | |
| * Return the length of the given event. Will return | |
| * the length of the time extend if the event is a | |
| * time extend. | |
| */ | |
| static inline unsigned | |
| rb_event_length(struct ring_buffer_event *event) | |
| { | |
| switch (event->type_len) { | |
| case RINGBUF_TYPE_PADDING: | |
| if (rb_null_event(event)) | |
| /* undefined */ | |
| return -1; | |
| return event->array[0] + RB_EVNT_HDR_SIZE; | |
| case RINGBUF_TYPE_TIME_EXTEND: | |
| return RB_LEN_TIME_EXTEND; | |
| case RINGBUF_TYPE_TIME_STAMP: | |
| return RB_LEN_TIME_STAMP; | |
| case RINGBUF_TYPE_DATA: | |
| return rb_event_data_length(event); | |
| default: | |
| BUG(); | |
| } | |
| /* not hit */ | |
| return 0; | |
| } | |
| /* | |
| * Return total length of time extend and data, | |
| * or just the event length for all other events. | |
| */ | |
| static inline unsigned | |
| rb_event_ts_length(struct ring_buffer_event *event) | |
| { | |
| unsigned len = 0; | |
| if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) { | |
| /* time extends include the data event after it */ | |
| len = RB_LEN_TIME_EXTEND; | |
| event = skip_time_extend(event); | |
| } | |
| return len + rb_event_length(event); | |
| } | |
| /** | |
| * ring_buffer_event_length - return the length of the event | |
| * @event: the event to get the length of | |
| * | |
| * Returns the size of the data load of a data event. | |
| * If the event is something other than a data event, it | |
| * returns the size of the event itself. With the exception | |
| * of a TIME EXTEND, where it still returns the size of the | |
| * data load of the data event after it. | |
| */ | |
| unsigned ring_buffer_event_length(struct ring_buffer_event *event) | |
| { | |
| unsigned length; | |
| if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) | |
| event = skip_time_extend(event); | |
| length = rb_event_length(event); | |
| if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX) | |
| return length; | |
| length -= RB_EVNT_HDR_SIZE; | |
| if (length > RB_MAX_SMALL_DATA + sizeof(event->array[0])) | |
| length -= sizeof(event->array[0]); | |
| return length; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_event_length); | |
| /* inline for ring buffer fast paths */ | |
| static void * | |
| rb_event_data(struct ring_buffer_event *event) | |
| { | |
| if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) | |
| event = skip_time_extend(event); | |
| BUG_ON(event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX); | |
| /* If length is in len field, then array[0] has the data */ | |
| if (event->type_len) | |
| return (void *)&event->array[0]; | |
| /* Otherwise length is in array[0] and array[1] has the data */ | |
| return (void *)&event->array[1]; | |
| } | |
| /** | |
| * ring_buffer_event_data - return the data of the event | |
| * @event: the event to get the data from | |
| */ | |
| void *ring_buffer_event_data(struct ring_buffer_event *event) | |
| { | |
| return rb_event_data(event); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_event_data); | |
| #define for_each_buffer_cpu(buffer, cpu) \ | |
| for_each_cpu(cpu, buffer->cpumask) | |
| #define TS_SHIFT 27 | |
| #define TS_MASK ((1ULL << TS_SHIFT) - 1) | |
| #define TS_DELTA_TEST (~TS_MASK) | |
| /* Flag when events were overwritten */ | |
| #define RB_MISSED_EVENTS (1 << 31) | |
| /* Missed count stored at end */ | |
| #define RB_MISSED_STORED (1 << 30) | |
| struct buffer_data_page { | |
| u64 time_stamp; /* page time stamp */ | |
| local_t commit; /* write committed index */ | |
| unsigned char data[] RB_ALIGN_DATA; /* data of buffer page */ | |
| }; | |
| /* | |
| * Note, the buffer_page list must be first. The buffer pages | |
| * are allocated in cache lines, which means that each buffer | |
| * page will be at the beginning of a cache line, and thus | |
| * the least significant bits will be zero. We use this to | |
| * add flags in the list struct pointers, to make the ring buffer | |
| * lockless. | |
| */ | |
| struct buffer_page { | |
| struct list_head list; /* list of buffer pages */ | |
| local_t write; /* index for next write */ | |
| unsigned read; /* index for next read */ | |
| local_t entries; /* entries on this page */ | |
| unsigned long real_end; /* real end of data */ | |
| struct buffer_data_page *page; /* Actual data page */ | |
| }; | |
| /* | |
| * The buffer page counters, write and entries, must be reset | |
| * atomically when crossing page boundaries. To synchronize this | |
| * update, two counters are inserted into the number. One is | |
| * the actual counter for the write position or count on the page. | |
| * | |
| * The other is a counter of updaters. Before an update happens | |
| * the update partition of the counter is incremented. This will | |
| * allow the updater to update the counter atomically. | |
| * | |
| * The counter is 20 bits, and the state data is 12. | |
| */ | |
| #define RB_WRITE_MASK 0xfffff | |
| #define RB_WRITE_INTCNT (1 << 20) | |
| static void rb_init_page(struct buffer_data_page *bpage) | |
| { | |
| local_set(&bpage->commit, 0); | |
| } | |
| /** | |
| * ring_buffer_page_len - the size of data on the page. | |
| * @page: The page to read | |
| * | |
| * Returns the amount of data on the page, including buffer page header. | |
| */ | |
| size_t ring_buffer_page_len(void *page) | |
| { | |
| return local_read(&((struct buffer_data_page *)page)->commit) | |
| + BUF_PAGE_HDR_SIZE; | |
| } | |
| /* | |
| * Also stolen from mm/slob.c. Thanks to Mathieu Desnoyers for pointing | |
| * this issue out. | |
| */ | |
| static void free_buffer_page(struct buffer_page *bpage) | |
| { | |
| free_page((unsigned long)bpage->page); | |
| kfree(bpage); | |
| } | |
| /* | |
| * We need to fit the time_stamp delta into 27 bits. | |
| */ | |
| static inline int test_time_stamp(u64 delta) | |
| { | |
| if (delta & TS_DELTA_TEST) | |
| return 1; | |
| return 0; | |
| } | |
| #define BUF_PAGE_SIZE (PAGE_SIZE - BUF_PAGE_HDR_SIZE) | |
| /* Max payload is BUF_PAGE_SIZE - header (8bytes) */ | |
| #define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2)) | |
| int ring_buffer_print_page_header(struct trace_seq *s) | |
| { | |
| struct buffer_data_page field; | |
| int ret; | |
| ret = trace_seq_printf(s, "\tfield: u64 timestamp;\t" | |
| "offset:0;\tsize:%u;\tsigned:%u;\n", | |
| (unsigned int)sizeof(field.time_stamp), | |
| (unsigned int)is_signed_type(u64)); | |
| ret = trace_seq_printf(s, "\tfield: local_t commit;\t" | |
| "offset:%u;\tsize:%u;\tsigned:%u;\n", | |
| (unsigned int)offsetof(typeof(field), commit), | |
| (unsigned int)sizeof(field.commit), | |
| (unsigned int)is_signed_type(long)); | |
| ret = trace_seq_printf(s, "\tfield: int overwrite;\t" | |
| "offset:%u;\tsize:%u;\tsigned:%u;\n", | |
| (unsigned int)offsetof(typeof(field), commit), | |
| 1, | |
| (unsigned int)is_signed_type(long)); | |
| ret = trace_seq_printf(s, "\tfield: char data;\t" | |
| "offset:%u;\tsize:%u;\tsigned:%u;\n", | |
| (unsigned int)offsetof(typeof(field), data), | |
| (unsigned int)BUF_PAGE_SIZE, | |
| (unsigned int)is_signed_type(char)); | |
| return ret; | |
| } | |
| struct rb_irq_work { | |
| struct irq_work work; | |
| wait_queue_head_t waiters; | |
| bool waiters_pending; | |
| }; | |
| /* | |
| * head_page == tail_page && head == tail then buffer is empty. | |
| */ | |
| struct ring_buffer_per_cpu { | |
| int cpu; | |
| atomic_t record_disabled; | |
| struct ring_buffer *buffer; | |
| raw_spinlock_t reader_lock; /* serialize readers */ | |
| arch_spinlock_t lock; | |
| struct lock_class_key lock_key; | |
| unsigned int nr_pages; | |
| struct list_head *pages; | |
| struct buffer_page *head_page; /* read from head */ | |
| struct buffer_page *tail_page; /* write to tail */ | |
| struct buffer_page *commit_page; /* committed pages */ | |
| struct buffer_page *reader_page; | |
| unsigned long lost_events; | |
| unsigned long last_overrun; | |
| local_t entries_bytes; | |
| local_t entries; | |
| local_t overrun; | |
| local_t commit_overrun; | |
| local_t dropped_events; | |
| local_t committing; | |
| local_t commits; | |
| unsigned long read; | |
| unsigned long read_bytes; | |
| u64 write_stamp; | |
| u64 read_stamp; | |
| /* ring buffer pages to update, > 0 to add, < 0 to remove */ | |
| int nr_pages_to_update; | |
| struct list_head new_pages; /* new pages to add */ | |
| struct work_struct update_pages_work; | |
| struct completion update_done; | |
| struct rb_irq_work irq_work; | |
| }; | |
| struct ring_buffer { | |
| unsigned flags; | |
| int cpus; | |
| atomic_t record_disabled; | |
| atomic_t resize_disabled; | |
| cpumask_var_t cpumask; | |
| struct lock_class_key *reader_lock_key; | |
| struct mutex mutex; | |
| struct ring_buffer_per_cpu **buffers; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| struct notifier_block cpu_notify; | |
| #endif | |
| u64 (*clock)(void); | |
| struct rb_irq_work irq_work; | |
| }; | |
| struct ring_buffer_iter { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long head; | |
| struct buffer_page *head_page; | |
| struct buffer_page *cache_reader_page; | |
| unsigned long cache_read; | |
| u64 read_stamp; | |
| }; | |
| /* | |
| * rb_wake_up_waiters - wake up tasks waiting for ring buffer input | |
| * | |
| * Schedules a delayed work to wake up any task that is blocked on the | |
| * ring buffer waiters queue. | |
| */ | |
| static void rb_wake_up_waiters(struct irq_work *work) | |
| { | |
| struct rb_irq_work *rbwork = container_of(work, struct rb_irq_work, work); | |
| wake_up_all(&rbwork->waiters); | |
| } | |
| /** | |
| * ring_buffer_wait - wait for input to the ring buffer | |
| * @buffer: buffer to wait on | |
| * @cpu: the cpu buffer to wait on | |
| * | |
| * If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon | |
| * as data is added to any of the @buffer's cpu buffers. Otherwise | |
| * it will wait for data to be added to a specific cpu buffer. | |
| */ | |
| void ring_buffer_wait(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| DEFINE_WAIT(wait); | |
| struct rb_irq_work *work; | |
| /* | |
| * Depending on what the caller is waiting for, either any | |
| * data in any cpu buffer, or a specific buffer, put the | |
| * caller on the appropriate wait queue. | |
| */ | |
| if (cpu == RING_BUFFER_ALL_CPUS) | |
| work = &buffer->irq_work; | |
| else { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| work = &cpu_buffer->irq_work; | |
| } | |
| prepare_to_wait(&work->waiters, &wait, TASK_INTERRUPTIBLE); | |
| /* | |
| * The events can happen in critical sections where | |
| * checking a work queue can cause deadlocks. | |
| * After adding a task to the queue, this flag is set | |
| * only to notify events to try to wake up the queue | |
| * using irq_work. | |
| * | |
| * We don't clear it even if the buffer is no longer | |
| * empty. The flag only causes the next event to run | |
| * irq_work to do the work queue wake up. The worse | |
| * that can happen if we race with !trace_empty() is that | |
| * an event will cause an irq_work to try to wake up | |
| * an empty queue. | |
| * | |
| * There's no reason to protect this flag either, as | |
| * the work queue and irq_work logic will do the necessary | |
| * synchronization for the wake ups. The only thing | |
| * that is necessary is that the wake up happens after | |
| * a task has been queued. It's OK for spurious wake ups. | |
| */ | |
| work->waiters_pending = true; | |
| if ((cpu == RING_BUFFER_ALL_CPUS && ring_buffer_empty(buffer)) || | |
| (cpu != RING_BUFFER_ALL_CPUS && ring_buffer_empty_cpu(buffer, cpu))) | |
| schedule(); | |
| finish_wait(&work->waiters, &wait); | |
| } | |
| /** | |
| * ring_buffer_poll_wait - poll on buffer input | |
| * @buffer: buffer to wait on | |
| * @cpu: the cpu buffer to wait on | |
| * @filp: the file descriptor | |
| * @poll_table: The poll descriptor | |
| * | |
| * If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon | |
| * as data is added to any of the @buffer's cpu buffers. Otherwise | |
| * it will wait for data to be added to a specific cpu buffer. | |
| * | |
| * Returns POLLIN | POLLRDNORM if data exists in the buffers, | |
| * zero otherwise. | |
| */ | |
| int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu, | |
| struct file *filp, poll_table *poll_table) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct rb_irq_work *work; | |
| if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) || | |
| (cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu))) | |
| return POLLIN | POLLRDNORM; | |
| if (cpu == RING_BUFFER_ALL_CPUS) | |
| work = &buffer->irq_work; | |
| else { | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return -EINVAL; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| work = &cpu_buffer->irq_work; | |
| } | |
| work->waiters_pending = true; | |
| poll_wait(filp, &work->waiters, poll_table); | |
| if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) || | |
| (cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu))) | |
| return POLLIN | POLLRDNORM; | |
| return 0; | |
| } | |
| /* buffer may be either ring_buffer or ring_buffer_per_cpu */ | |
| #define RB_WARN_ON(b, cond) \ | |
| ({ \ | |
| int _____ret = unlikely(cond); \ | |
| if (_____ret) { \ | |
| if (__same_type(*(b), struct ring_buffer_per_cpu)) { \ | |
| struct ring_buffer_per_cpu *__b = \ | |
| (void *)b; \ | |
| atomic_inc(&__b->buffer->record_disabled); \ | |
| } else \ | |
| atomic_inc(&b->record_disabled); \ | |
| WARN_ON(1); \ | |
| } \ | |
| _____ret; \ | |
| }) | |
| /* Up this if you want to test the TIME_EXTENTS and normalization */ | |
| #define DEBUG_SHIFT 0 | |
| static inline u64 rb_time_stamp(struct ring_buffer *buffer) | |
| { | |
| /* shift to debug/test normalization and TIME_EXTENTS */ | |
| return buffer->clock() << DEBUG_SHIFT; | |
| } | |
| u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu) | |
| { | |
| u64 time; | |
| preempt_disable_notrace(); | |
| time = rb_time_stamp(buffer); | |
| preempt_enable_no_resched_notrace(); | |
| return time; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_time_stamp); | |
| void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer, | |
| int cpu, u64 *ts) | |
| { | |
| /* Just stupid testing the normalize function and deltas */ | |
| *ts >>= DEBUG_SHIFT; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_normalize_time_stamp); | |
| /* | |
| * Making the ring buffer lockless makes things tricky. | |
| * Although writes only happen on the CPU that they are on, | |
| * and they only need to worry about interrupts. Reads can | |
| * happen on any CPU. | |
| * | |
| * The reader page is always off the ring buffer, but when the | |
| * reader finishes with a page, it needs to swap its page with | |
| * a new one from the buffer. The reader needs to take from | |
| * the head (writes go to the tail). But if a writer is in overwrite | |
| * mode and wraps, it must push the head page forward. | |
| * | |
| * Here lies the problem. | |
| * | |
| * The reader must be careful to replace only the head page, and | |
| * not another one. As described at the top of the file in the | |
| * ASCII art, the reader sets its old page to point to the next | |
| * page after head. It then sets the page after head to point to | |
| * the old reader page. But if the writer moves the head page | |
| * during this operation, the reader could end up with the tail. | |
| * | |
| * We use cmpxchg to help prevent this race. We also do something | |
| * special with the page before head. We set the LSB to 1. | |
| * | |
| * When the writer must push the page forward, it will clear the | |
| * bit that points to the head page, move the head, and then set | |
| * the bit that points to the new head page. | |
| * | |
| * We also don't want an interrupt coming in and moving the head | |
| * page on another writer. Thus we use the second LSB to catch | |
| * that too. Thus: | |
| * | |
| * head->list->prev->next bit 1 bit 0 | |
| * ------- ------- | |
| * Normal page 0 0 | |
| * Points to head page 0 1 | |
| * New head page 1 0 | |
| * | |
| * Note we can not trust the prev pointer of the head page, because: | |
| * | |
| * +----+ +-----+ +-----+ | |
| * | |------>| T |---X--->| N | | |
| * | |<------| | | | | |
| * +----+ +-----+ +-----+ | |
| * ^ ^ | | |
| * | +-----+ | | | |
| * +----------| R |----------+ | | |
| * | |<-----------+ | |
| * +-----+ | |
| * | |
| * Key: ---X--> HEAD flag set in pointer | |
| * T Tail page | |
| * R Reader page | |
| * N Next page | |
| * | |
| * (see __rb_reserve_next() to see where this happens) | |
| * | |
| * What the above shows is that the reader just swapped out | |
| * the reader page with a page in the buffer, but before it | |
| * could make the new header point back to the new page added | |
| * it was preempted by a writer. The writer moved forward onto | |
| * the new page added by the reader and is about to move forward | |
| * again. | |
| * | |
| * You can see, it is legitimate for the previous pointer of | |
| * the head (or any page) not to point back to itself. But only | |
| * temporarially. | |
| */ | |
| #define RB_PAGE_NORMAL 0UL | |
| #define RB_PAGE_HEAD 1UL | |
| #define RB_PAGE_UPDATE 2UL | |
| #define RB_FLAG_MASK 3UL | |
| /* PAGE_MOVED is not part of the mask */ | |
| #define RB_PAGE_MOVED 4UL | |
| /* | |
| * rb_list_head - remove any bit | |
| */ | |
| static struct list_head *rb_list_head(struct list_head *list) | |
| { | |
| unsigned long val = (unsigned long)list; | |
| return (struct list_head *)(val & ~RB_FLAG_MASK); | |
| } | |
| /* | |
| * rb_is_head_page - test if the given page is the head page | |
| * | |
| * Because the reader may move the head_page pointer, we can | |
| * not trust what the head page is (it may be pointing to | |
| * the reader page). But if the next page is a header page, | |
| * its flags will be non zero. | |
| */ | |
| static inline int | |
| rb_is_head_page(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *page, struct list_head *list) | |
| { | |
| unsigned long val; | |
| val = (unsigned long)list->next; | |
| if ((val & ~RB_FLAG_MASK) != (unsigned long)&page->list) | |
| return RB_PAGE_MOVED; | |
| return val & RB_FLAG_MASK; | |
| } | |
| /* | |
| * rb_is_reader_page | |
| * | |
| * The unique thing about the reader page, is that, if the | |
| * writer is ever on it, the previous pointer never points | |
| * back to the reader page. | |
| */ | |
| static int rb_is_reader_page(struct buffer_page *page) | |
| { | |
| struct list_head *list = page->list.prev; | |
| return rb_list_head(list->next) != &page->list; | |
| } | |
| /* | |
| * rb_set_list_to_head - set a list_head to be pointing to head. | |
| */ | |
| static void rb_set_list_to_head(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct list_head *list) | |
| { | |
| unsigned long *ptr; | |
| ptr = (unsigned long *)&list->next; | |
| *ptr |= RB_PAGE_HEAD; | |
| *ptr &= ~RB_PAGE_UPDATE; | |
| } | |
| /* | |
| * rb_head_page_activate - sets up head page | |
| */ | |
| static void rb_head_page_activate(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct buffer_page *head; | |
| head = cpu_buffer->head_page; | |
| if (!head) | |
| return; | |
| /* | |
| * Set the previous list pointer to have the HEAD flag. | |
| */ | |
| rb_set_list_to_head(cpu_buffer, head->list.prev); | |
| } | |
| static void rb_list_head_clear(struct list_head *list) | |
| { | |
| unsigned long *ptr = (unsigned long *)&list->next; | |
| *ptr &= ~RB_FLAG_MASK; | |
| } | |
| /* | |
| * rb_head_page_dactivate - clears head page ptr (for free list) | |
| */ | |
| static void | |
| rb_head_page_deactivate(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct list_head *hd; | |
| /* Go through the whole list and clear any pointers found. */ | |
| rb_list_head_clear(cpu_buffer->pages); | |
| list_for_each(hd, cpu_buffer->pages) | |
| rb_list_head_clear(hd); | |
| } | |
| static int rb_head_page_set(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *head, | |
| struct buffer_page *prev, | |
| int old_flag, int new_flag) | |
| { | |
| struct list_head *list; | |
| unsigned long val = (unsigned long)&head->list; | |
| unsigned long ret; | |
| list = &prev->list; | |
| val &= ~RB_FLAG_MASK; | |
| ret = cmpxchg((unsigned long *)&list->next, | |
| val | old_flag, val | new_flag); | |
| /* check if the reader took the page */ | |
| if ((ret & ~RB_FLAG_MASK) != val) | |
| return RB_PAGE_MOVED; | |
| return ret & RB_FLAG_MASK; | |
| } | |
| static int rb_head_page_set_update(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *head, | |
| struct buffer_page *prev, | |
| int old_flag) | |
| { | |
| return rb_head_page_set(cpu_buffer, head, prev, | |
| old_flag, RB_PAGE_UPDATE); | |
| } | |
| static int rb_head_page_set_head(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *head, | |
| struct buffer_page *prev, | |
| int old_flag) | |
| { | |
| return rb_head_page_set(cpu_buffer, head, prev, | |
| old_flag, RB_PAGE_HEAD); | |
| } | |
| static int rb_head_page_set_normal(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *head, | |
| struct buffer_page *prev, | |
| int old_flag) | |
| { | |
| return rb_head_page_set(cpu_buffer, head, prev, | |
| old_flag, RB_PAGE_NORMAL); | |
| } | |
| static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page **bpage) | |
| { | |
| struct list_head *p = rb_list_head((*bpage)->list.next); | |
| *bpage = list_entry(p, struct buffer_page, list); | |
| } | |
| static struct buffer_page * | |
| rb_set_head_page(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct buffer_page *head; | |
| struct buffer_page *page; | |
| struct list_head *list; | |
| int i; | |
| if (RB_WARN_ON(cpu_buffer, !cpu_buffer->head_page)) | |
| return NULL; | |
| /* sanity check */ | |
| list = cpu_buffer->pages; | |
| if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev->next) != list)) | |
| return NULL; | |
| page = head = cpu_buffer->head_page; | |
| /* | |
| * It is possible that the writer moves the header behind | |
| * where we started, and we miss in one loop. | |
| * A second loop should grab the header, but we'll do | |
| * three loops just because I'm paranoid. | |
| */ | |
| for (i = 0; i < 3; i++) { | |
| do { | |
| if (rb_is_head_page(cpu_buffer, page, page->list.prev)) { | |
| cpu_buffer->head_page = page; | |
| return page; | |
| } | |
| rb_inc_page(cpu_buffer, &page); | |
| } while (page != head); | |
| } | |
| RB_WARN_ON(cpu_buffer, 1); | |
| return NULL; | |
| } | |
| static int rb_head_page_replace(struct buffer_page *old, | |
| struct buffer_page *new) | |
| { | |
| unsigned long *ptr = (unsigned long *)&old->list.prev->next; | |
| unsigned long val; | |
| unsigned long ret; | |
| val = *ptr & ~RB_FLAG_MASK; | |
| val |= RB_PAGE_HEAD; | |
| ret = cmpxchg(ptr, val, (unsigned long)&new->list); | |
| return ret == val; | |
| } | |
| /* | |
| * rb_tail_page_update - move the tail page forward | |
| * | |
| * Returns 1 if moved tail page, 0 if someone else did. | |
| */ | |
| static int rb_tail_page_update(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *tail_page, | |
| struct buffer_page *next_page) | |
| { | |
| struct buffer_page *old_tail; | |
| unsigned long old_entries; | |
| unsigned long old_write; | |
| int ret = 0; | |
| /* | |
| * The tail page now needs to be moved forward. | |
| * | |
| * We need to reset the tail page, but without messing | |
| * with possible erasing of data brought in by interrupts | |
| * that have moved the tail page and are currently on it. | |
| * | |
| * We add a counter to the write field to denote this. | |
| */ | |
| old_write = local_add_return(RB_WRITE_INTCNT, &next_page->write); | |
| old_entries = local_add_return(RB_WRITE_INTCNT, &next_page->entries); | |
| /* | |
| * Just make sure we have seen our old_write and synchronize | |
| * with any interrupts that come in. | |
| */ | |
| barrier(); | |
| /* | |
| * If the tail page is still the same as what we think | |
| * it is, then it is up to us to update the tail | |
| * pointer. | |
| */ | |
| if (tail_page == cpu_buffer->tail_page) { | |
| /* Zero the write counter */ | |
| unsigned long val = old_write & ~RB_WRITE_MASK; | |
| unsigned long eval = old_entries & ~RB_WRITE_MASK; | |
| /* | |
| * This will only succeed if an interrupt did | |
| * not come in and change it. In which case, we | |
| * do not want to modify it. | |
| * | |
| * We add (void) to let the compiler know that we do not care | |
| * about the return value of these functions. We use the | |
| * cmpxchg to only update if an interrupt did not already | |
| * do it for us. If the cmpxchg fails, we don't care. | |
| */ | |
| (void)local_cmpxchg(&next_page->write, old_write, val); | |
| (void)local_cmpxchg(&next_page->entries, old_entries, eval); | |
| /* | |
| * No need to worry about races with clearing out the commit. | |
| * it only can increment when a commit takes place. But that | |
| * only happens in the outer most nested commit. | |
| */ | |
| local_set(&next_page->page->commit, 0); | |
| old_tail = cmpxchg(&cpu_buffer->tail_page, | |
| tail_page, next_page); | |
| if (old_tail == tail_page) | |
| ret = 1; | |
| } | |
| return ret; | |
| } | |
| static int rb_check_bpage(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *bpage) | |
| { | |
| unsigned long val = (unsigned long)bpage; | |
| if (RB_WARN_ON(cpu_buffer, val & RB_FLAG_MASK)) | |
| return 1; | |
| return 0; | |
| } | |
| /** | |
| * rb_check_list - make sure a pointer to a list has the last bits zero | |
| */ | |
| static int rb_check_list(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct list_head *list) | |
| { | |
| if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev) != list->prev)) | |
| return 1; | |
| if (RB_WARN_ON(cpu_buffer, rb_list_head(list->next) != list->next)) | |
| return 1; | |
| return 0; | |
| } | |
| /** | |
| * rb_check_pages - integrity check of buffer pages | |
| * @cpu_buffer: CPU buffer with pages to test | |
| * | |
| * As a safety measure we check to make sure the data pages have not | |
| * been corrupted. | |
| */ | |
| static int rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct list_head *head = cpu_buffer->pages; | |
| struct buffer_page *bpage, *tmp; | |
| /* Reset the head page if it exists */ | |
| if (cpu_buffer->head_page) | |
| rb_set_head_page(cpu_buffer); | |
| rb_head_page_deactivate(cpu_buffer); | |
| if (RB_WARN_ON(cpu_buffer, head->next->prev != head)) | |
| return -1; | |
| if (RB_WARN_ON(cpu_buffer, head->prev->next != head)) | |
| return -1; | |
| if (rb_check_list(cpu_buffer, head)) | |
| return -1; | |
| list_for_each_entry_safe(bpage, tmp, head, list) { | |
| if (RB_WARN_ON(cpu_buffer, | |
| bpage->list.next->prev != &bpage->list)) | |
| return -1; | |
| if (RB_WARN_ON(cpu_buffer, | |
| bpage->list.prev->next != &bpage->list)) | |
| return -1; | |
| if (rb_check_list(cpu_buffer, &bpage->list)) | |
| return -1; | |
| } | |
| rb_head_page_activate(cpu_buffer); | |
| return 0; | |
| } | |
| static int __rb_allocate_pages(int nr_pages, struct list_head *pages, int cpu) | |
| { | |
| int i; | |
| struct buffer_page *bpage, *tmp; | |
| for (i = 0; i < nr_pages; i++) { | |
| struct page *page; | |
| /* | |
| * __GFP_NORETRY flag makes sure that the allocation fails | |
| * gracefully without invoking oom-killer and the system is | |
| * not destabilized. | |
| */ | |
| bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()), | |
| GFP_KERNEL | __GFP_NORETRY, | |
| cpu_to_node(cpu)); | |
| if (!bpage) | |
| goto free_pages; | |
| list_add(&bpage->list, pages); | |
| page = alloc_pages_node(cpu_to_node(cpu), | |
| GFP_KERNEL | __GFP_NORETRY, 0); | |
| if (!page) | |
| goto free_pages; | |
| bpage->page = page_address(page); | |
| rb_init_page(bpage->page); | |
| } | |
| return 0; | |
| free_pages: | |
| list_for_each_entry_safe(bpage, tmp, pages, list) { | |
| list_del_init(&bpage->list); | |
| free_buffer_page(bpage); | |
| } | |
| return -ENOMEM; | |
| } | |
| static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer, | |
| unsigned nr_pages) | |
| { | |
| LIST_HEAD(pages); | |
| WARN_ON(!nr_pages); | |
| if (__rb_allocate_pages(nr_pages, &pages, cpu_buffer->cpu)) | |
| return -ENOMEM; | |
| /* | |
| * The ring buffer page list is a circular list that does not | |
| * start and end with a list head. All page list items point to | |
| * other pages. | |
| */ | |
| cpu_buffer->pages = pages.next; | |
| list_del(&pages); | |
| cpu_buffer->nr_pages = nr_pages; | |
| rb_check_pages(cpu_buffer); | |
| return 0; | |
| } | |
| static struct ring_buffer_per_cpu * | |
| rb_allocate_cpu_buffer(struct ring_buffer *buffer, int nr_pages, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct buffer_page *bpage; | |
| struct page *page; | |
| int ret; | |
| cpu_buffer = kzalloc_node(ALIGN(sizeof(*cpu_buffer), cache_line_size()), | |
| GFP_KERNEL, cpu_to_node(cpu)); | |
| if (!cpu_buffer) | |
| return NULL; | |
| cpu_buffer->cpu = cpu; | |
| cpu_buffer->buffer = buffer; | |
| raw_spin_lock_init(&cpu_buffer->reader_lock); | |
| lockdep_set_class(&cpu_buffer->reader_lock, buffer->reader_lock_key); | |
| cpu_buffer->lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED; | |
| INIT_WORK(&cpu_buffer->update_pages_work, update_pages_handler); | |
| init_completion(&cpu_buffer->update_done); | |
| init_irq_work(&cpu_buffer->irq_work.work, rb_wake_up_waiters); | |
| init_waitqueue_head(&cpu_buffer->irq_work.waiters); | |
| bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()), | |
| GFP_KERNEL, cpu_to_node(cpu)); | |
| if (!bpage) | |
| goto fail_free_buffer; | |
| rb_check_bpage(cpu_buffer, bpage); | |
| cpu_buffer->reader_page = bpage; | |
| page = alloc_pages_node(cpu_to_node(cpu), GFP_KERNEL, 0); | |
| if (!page) | |
| goto fail_free_reader; | |
| bpage->page = page_address(page); | |
| rb_init_page(bpage->page); | |
| INIT_LIST_HEAD(&cpu_buffer->reader_page->list); | |
| INIT_LIST_HEAD(&cpu_buffer->new_pages); | |
| ret = rb_allocate_pages(cpu_buffer, nr_pages); | |
| if (ret < 0) | |
| goto fail_free_reader; | |
| cpu_buffer->head_page | |
| = list_entry(cpu_buffer->pages, struct buffer_page, list); | |
| cpu_buffer->tail_page = cpu_buffer->commit_page = cpu_buffer->head_page; | |
| rb_head_page_activate(cpu_buffer); | |
| return cpu_buffer; | |
| fail_free_reader: | |
| free_buffer_page(cpu_buffer->reader_page); | |
| fail_free_buffer: | |
| kfree(cpu_buffer); | |
| return NULL; | |
| } | |
| static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct list_head *head = cpu_buffer->pages; | |
| struct buffer_page *bpage, *tmp; | |
| free_buffer_page(cpu_buffer->reader_page); | |
| rb_head_page_deactivate(cpu_buffer); | |
| if (head) { | |
| list_for_each_entry_safe(bpage, tmp, head, list) { | |
| list_del_init(&bpage->list); | |
| free_buffer_page(bpage); | |
| } | |
| bpage = list_entry(head, struct buffer_page, list); | |
| free_buffer_page(bpage); | |
| } | |
| kfree(cpu_buffer); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| static int rb_cpu_notify(struct notifier_block *self, | |
| unsigned long action, void *hcpu); | |
| #endif | |
| /** | |
| * __ring_buffer_alloc - allocate a new ring_buffer | |
| * @size: the size in bytes per cpu that is needed. | |
| * @flags: attributes to set for the ring buffer. | |
| * | |
| * Currently the only flag that is available is the RB_FL_OVERWRITE | |
| * flag. This flag means that the buffer will overwrite old data | |
| * when the buffer wraps. If this flag is not set, the buffer will | |
| * drop data when the tail hits the head. | |
| */ | |
| struct ring_buffer *__ring_buffer_alloc(unsigned long size, unsigned flags, | |
| struct lock_class_key *key) | |
| { | |
| struct ring_buffer *buffer; | |
| int bsize; | |
| int cpu, nr_pages; | |
| /* keep it in its own cache line */ | |
| buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()), | |
| GFP_KERNEL); | |
| if (!buffer) | |
| return NULL; | |
| if (!alloc_cpumask_var(&buffer->cpumask, GFP_KERNEL)) | |
| goto fail_free_buffer; | |
| nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE); | |
| buffer->flags = flags; | |
| buffer->clock = trace_clock_local; | |
| buffer->reader_lock_key = key; | |
| init_irq_work(&buffer->irq_work.work, rb_wake_up_waiters); | |
| init_waitqueue_head(&buffer->irq_work.waiters); | |
| /* need at least two pages */ | |
| if (nr_pages < 2) | |
| nr_pages = 2; | |
| /* | |
| * In case of non-hotplug cpu, if the ring-buffer is allocated | |
| * in early initcall, it will not be notified of secondary cpus. | |
| * In that off case, we need to allocate for all possible cpus. | |
| */ | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| get_online_cpus(); | |
| cpumask_copy(buffer->cpumask, cpu_online_mask); | |
| #else | |
| cpumask_copy(buffer->cpumask, cpu_possible_mask); | |
| #endif | |
| buffer->cpus = nr_cpu_ids; | |
| bsize = sizeof(void *) * nr_cpu_ids; | |
| buffer->buffers = kzalloc(ALIGN(bsize, cache_line_size()), | |
| GFP_KERNEL); | |
| if (!buffer->buffers) | |
| goto fail_free_cpumask; | |
| for_each_buffer_cpu(buffer, cpu) { | |
| buffer->buffers[cpu] = | |
| rb_allocate_cpu_buffer(buffer, nr_pages, cpu); | |
| if (!buffer->buffers[cpu]) | |
| goto fail_free_buffers; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| buffer->cpu_notify.notifier_call = rb_cpu_notify; | |
| buffer->cpu_notify.priority = 0; | |
| register_cpu_notifier(&buffer->cpu_notify); | |
| #endif | |
| put_online_cpus(); | |
| mutex_init(&buffer->mutex); | |
| return buffer; | |
| fail_free_buffers: | |
| for_each_buffer_cpu(buffer, cpu) { | |
| if (buffer->buffers[cpu]) | |
| rb_free_cpu_buffer(buffer->buffers[cpu]); | |
| } | |
| kfree(buffer->buffers); | |
| fail_free_cpumask: | |
| free_cpumask_var(buffer->cpumask); | |
| put_online_cpus(); | |
| fail_free_buffer: | |
| kfree(buffer); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(__ring_buffer_alloc); | |
| /** | |
| * ring_buffer_free - free a ring buffer. | |
| * @buffer: the buffer to free. | |
| */ | |
| void | |
| ring_buffer_free(struct ring_buffer *buffer) | |
| { | |
| int cpu; | |
| get_online_cpus(); | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| unregister_cpu_notifier(&buffer->cpu_notify); | |
| #endif | |
| for_each_buffer_cpu(buffer, cpu) | |
| rb_free_cpu_buffer(buffer->buffers[cpu]); | |
| put_online_cpus(); | |
| kfree(buffer->buffers); | |
| free_cpumask_var(buffer->cpumask); | |
| kfree(buffer); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_free); | |
| void ring_buffer_set_clock(struct ring_buffer *buffer, | |
| u64 (*clock)(void)) | |
| { | |
| buffer->clock = clock; | |
| } | |
| static void rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer); | |
| static inline unsigned long rb_page_entries(struct buffer_page *bpage) | |
| { | |
| return local_read(&bpage->entries) & RB_WRITE_MASK; | |
| } | |
| static inline unsigned long rb_page_write(struct buffer_page *bpage) | |
| { | |
| return local_read(&bpage->write) & RB_WRITE_MASK; | |
| } | |
| static int | |
| rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned int nr_pages) | |
| { | |
| struct list_head *tail_page, *to_remove, *next_page; | |
| struct buffer_page *to_remove_page, *tmp_iter_page; | |
| struct buffer_page *last_page, *first_page; | |
| unsigned int nr_removed; | |
| unsigned long head_bit; | |
| int page_entries; | |
| head_bit = 0; | |
| raw_spin_lock_irq(&cpu_buffer->reader_lock); | |
| atomic_inc(&cpu_buffer->record_disabled); | |
| /* | |
| * We don't race with the readers since we have acquired the reader | |
| * lock. We also don't race with writers after disabling recording. | |
| * This makes it easy to figure out the first and the last page to be | |
| * removed from the list. We unlink all the pages in between including | |
| * the first and last pages. This is done in a busy loop so that we | |
| * lose the least number of traces. | |
| * The pages are freed after we restart recording and unlock readers. | |
| */ | |
| tail_page = &cpu_buffer->tail_page->list; | |
| /* | |
| * tail page might be on reader page, we remove the next page | |
| * from the ring buffer | |
| */ | |
| if (cpu_buffer->tail_page == cpu_buffer->reader_page) | |
| tail_page = rb_list_head(tail_page->next); | |
| to_remove = tail_page; | |
| /* start of pages to remove */ | |
| first_page = list_entry(rb_list_head(to_remove->next), | |
| struct buffer_page, list); | |
| for (nr_removed = 0; nr_removed < nr_pages; nr_removed++) { | |
| to_remove = rb_list_head(to_remove)->next; | |
| head_bit |= (unsigned long)to_remove & RB_PAGE_HEAD; | |
| } | |
| next_page = rb_list_head(to_remove)->next; | |
| /* | |
| * Now we remove all pages between tail_page and next_page. | |
| * Make sure that we have head_bit value preserved for the | |
| * next page | |
| */ | |
| tail_page->next = (struct list_head *)((unsigned long)next_page | | |
| head_bit); | |
| next_page = rb_list_head(next_page); | |
| next_page->prev = tail_page; | |
| /* make sure pages points to a valid page in the ring buffer */ | |
| cpu_buffer->pages = next_page; | |
| /* update head page */ | |
| if (head_bit) | |
| cpu_buffer->head_page = list_entry(next_page, | |
| struct buffer_page, list); | |
| /* | |
| * change read pointer to make sure any read iterators reset | |
| * themselves | |
| */ | |
| cpu_buffer->read = 0; | |
| /* pages are removed, resume tracing and then free the pages */ | |
| atomic_dec(&cpu_buffer->record_disabled); | |
| raw_spin_unlock_irq(&cpu_buffer->reader_lock); | |
| RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)); | |
| /* last buffer page to remove */ | |
| last_page = list_entry(rb_list_head(to_remove), struct buffer_page, | |
| list); | |
| tmp_iter_page = first_page; | |
| do { | |
| to_remove_page = tmp_iter_page; | |
| rb_inc_page(cpu_buffer, &tmp_iter_page); | |
| /* update the counters */ | |
| page_entries = rb_page_entries(to_remove_page); | |
| if (page_entries) { | |
| /* | |
| * If something was added to this page, it was full | |
| * since it is not the tail page. So we deduct the | |
| * bytes consumed in ring buffer from here. | |
| * Increment overrun to account for the lost events. | |
| */ | |
| local_add(page_entries, &cpu_buffer->overrun); | |
| local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes); | |
| } | |
| /* | |
| * We have already removed references to this list item, just | |
| * free up the buffer_page and its page | |
| */ | |
| free_buffer_page(to_remove_page); | |
| nr_removed--; | |
| } while (to_remove_page != last_page); | |
| RB_WARN_ON(cpu_buffer, nr_removed); | |
| return nr_removed == 0; | |
| } | |
| static int | |
| rb_insert_pages(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct list_head *pages = &cpu_buffer->new_pages; | |
| int retries, success; | |
| raw_spin_lock_irq(&cpu_buffer->reader_lock); | |
| /* | |
| * We are holding the reader lock, so the reader page won't be swapped | |
| * in the ring buffer. Now we are racing with the writer trying to | |
| * move head page and the tail page. | |
| * We are going to adapt the reader page update process where: | |
| * 1. We first splice the start and end of list of new pages between | |
| * the head page and its previous page. | |
| * 2. We cmpxchg the prev_page->next to point from head page to the | |
| * start of new pages list. | |
| * 3. Finally, we update the head->prev to the end of new list. | |
| * | |
| * We will try this process 10 times, to make sure that we don't keep | |
| * spinning. | |
| */ | |
| retries = 10; | |
| success = 0; | |
| while (retries--) { | |
| struct list_head *head_page, *prev_page, *r; | |
| struct list_head *last_page, *first_page; | |
| struct list_head *head_page_with_bit; | |
| head_page = &rb_set_head_page(cpu_buffer)->list; | |
| if (!head_page) | |
| break; | |
| prev_page = head_page->prev; | |
| first_page = pages->next; | |
| last_page = pages->prev; | |
| head_page_with_bit = (struct list_head *) | |
| ((unsigned long)head_page | RB_PAGE_HEAD); | |
| last_page->next = head_page_with_bit; | |
| first_page->prev = prev_page; | |
| r = cmpxchg(&prev_page->next, head_page_with_bit, first_page); | |
| if (r == head_page_with_bit) { | |
| /* | |
| * yay, we replaced the page pointer to our new list, | |
| * now, we just have to update to head page's prev | |
| * pointer to point to end of list | |
| */ | |
| head_page->prev = last_page; | |
| success = 1; | |
| break; | |
| } | |
| } | |
| if (success) | |
| INIT_LIST_HEAD(pages); | |
| /* | |
| * If we weren't successful in adding in new pages, warn and stop | |
| * tracing | |
| */ | |
| RB_WARN_ON(cpu_buffer, !success); | |
| raw_spin_unlock_irq(&cpu_buffer->reader_lock); | |
| /* free pages if they weren't inserted */ | |
| if (!success) { | |
| struct buffer_page *bpage, *tmp; | |
| list_for_each_entry_safe(bpage, tmp, &cpu_buffer->new_pages, | |
| list) { | |
| list_del_init(&bpage->list); | |
| free_buffer_page(bpage); | |
| } | |
| } | |
| return success; | |
| } | |
| static void rb_update_pages(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| int success; | |
| if (cpu_buffer->nr_pages_to_update > 0) | |
| success = rb_insert_pages(cpu_buffer); | |
| else | |
| success = rb_remove_pages(cpu_buffer, | |
| -cpu_buffer->nr_pages_to_update); | |
| if (success) | |
| cpu_buffer->nr_pages += cpu_buffer->nr_pages_to_update; | |
| } | |
| static void update_pages_handler(struct work_struct *work) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = container_of(work, | |
| struct ring_buffer_per_cpu, update_pages_work); | |
| rb_update_pages(cpu_buffer); | |
| complete(&cpu_buffer->update_done); | |
| } | |
| /** | |
| * ring_buffer_resize - resize the ring buffer | |
| * @buffer: the buffer to resize. | |
| * @size: the new size. | |
| * @cpu_id: the cpu buffer to resize | |
| * | |
| * Minimum size is 2 * BUF_PAGE_SIZE. | |
| * | |
| * Returns 0 on success and < 0 on failure. | |
| */ | |
| int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size, | |
| int cpu_id) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned nr_pages; | |
| int cpu, err = 0; | |
| /* | |
| * Always succeed at resizing a non-existent buffer: | |
| */ | |
| if (!buffer) | |
| return size; | |
| /* Make sure the requested buffer exists */ | |
| if (cpu_id != RING_BUFFER_ALL_CPUS && | |
| !cpumask_test_cpu(cpu_id, buffer->cpumask)) | |
| return size; | |
| size = DIV_ROUND_UP(size, BUF_PAGE_SIZE); | |
| size *= BUF_PAGE_SIZE; | |
| /* we need a minimum of two pages */ | |
| if (size < BUF_PAGE_SIZE * 2) | |
| size = BUF_PAGE_SIZE * 2; | |
| nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE); | |
| /* | |
| * Don't succeed if resizing is disabled, as a reader might be | |
| * manipulating the ring buffer and is expecting a sane state while | |
| * this is true. | |
| */ | |
| if (atomic_read(&buffer->resize_disabled)) | |
| return -EBUSY; | |
| /* prevent another thread from changing buffer sizes */ | |
| mutex_lock(&buffer->mutex); | |
| if (cpu_id == RING_BUFFER_ALL_CPUS) { | |
| /* calculate the pages to update */ | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| cpu_buffer->nr_pages_to_update = nr_pages - | |
| cpu_buffer->nr_pages; | |
| /* | |
| * nothing more to do for removing pages or no update | |
| */ | |
| if (cpu_buffer->nr_pages_to_update <= 0) | |
| continue; | |
| /* | |
| * to add pages, make sure all new pages can be | |
| * allocated without receiving ENOMEM | |
| */ | |
| INIT_LIST_HEAD(&cpu_buffer->new_pages); | |
| if (__rb_allocate_pages(cpu_buffer->nr_pages_to_update, | |
| &cpu_buffer->new_pages, cpu)) { | |
| /* not enough memory for new pages */ | |
| err = -ENOMEM; | |
| goto out_err; | |
| } | |
| } | |
| get_online_cpus(); | |
| /* | |
| * Fire off all the required work handlers | |
| * We can't schedule on offline CPUs, but it's not necessary | |
| * since we can change their buffer sizes without any race. | |
| */ | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| if (!cpu_buffer->nr_pages_to_update) | |
| continue; | |
| /* The update must run on the CPU that is being updated. */ | |
| preempt_disable(); | |
| if (cpu == smp_processor_id() || !cpu_online(cpu)) { | |
| rb_update_pages(cpu_buffer); | |
| cpu_buffer->nr_pages_to_update = 0; | |
| } else { | |
| /* | |
| * Can not disable preemption for schedule_work_on() | |
| * on PREEMPT_RT. | |
| */ | |
| preempt_enable(); | |
| schedule_work_on(cpu, | |
| &cpu_buffer->update_pages_work); | |
| preempt_disable(); | |
| } | |
| preempt_enable(); | |
| } | |
| /* wait for all the updates to complete */ | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| if (!cpu_buffer->nr_pages_to_update) | |
| continue; | |
| if (cpu_online(cpu)) | |
| wait_for_completion(&cpu_buffer->update_done); | |
| cpu_buffer->nr_pages_to_update = 0; | |
| } | |
| put_online_cpus(); | |
| } else { | |
| /* Make sure this CPU has been intitialized */ | |
| if (!cpumask_test_cpu(cpu_id, buffer->cpumask)) | |
| goto out; | |
| cpu_buffer = buffer->buffers[cpu_id]; | |
| if (nr_pages == cpu_buffer->nr_pages) | |
| goto out; | |
| cpu_buffer->nr_pages_to_update = nr_pages - | |
| cpu_buffer->nr_pages; | |
| INIT_LIST_HEAD(&cpu_buffer->new_pages); | |
| if (cpu_buffer->nr_pages_to_update > 0 && | |
| __rb_allocate_pages(cpu_buffer->nr_pages_to_update, | |
| &cpu_buffer->new_pages, cpu_id)) { | |
| err = -ENOMEM; | |
| goto out_err; | |
| } | |
| get_online_cpus(); | |
| preempt_disable(); | |
| /* The update must run on the CPU that is being updated. */ | |
| if (cpu_id == smp_processor_id() || !cpu_online(cpu_id)) | |
| rb_update_pages(cpu_buffer); | |
| else { | |
| /* | |
| * Can not disable preemption for schedule_work_on() | |
| * on PREEMPT_RT. | |
| */ | |
| preempt_enable(); | |
| schedule_work_on(cpu_id, | |
| &cpu_buffer->update_pages_work); | |
| wait_for_completion(&cpu_buffer->update_done); | |
| preempt_disable(); | |
| } | |
| preempt_enable(); | |
| cpu_buffer->nr_pages_to_update = 0; | |
| put_online_cpus(); | |
| } | |
| out: | |
| /* | |
| * The ring buffer resize can happen with the ring buffer | |
| * enabled, so that the update disturbs the tracing as little | |
| * as possible. But if the buffer is disabled, we do not need | |
| * to worry about that, and we can take the time to verify | |
| * that the buffer is not corrupt. | |
| */ | |
| if (atomic_read(&buffer->record_disabled)) { | |
| atomic_inc(&buffer->record_disabled); | |
| /* | |
| * Even though the buffer was disabled, we must make sure | |
| * that it is truly disabled before calling rb_check_pages. | |
| * There could have been a race between checking | |
| * record_disable and incrementing it. | |
| */ | |
| synchronize_sched(); | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| rb_check_pages(cpu_buffer); | |
| } | |
| atomic_dec(&buffer->record_disabled); | |
| } | |
| mutex_unlock(&buffer->mutex); | |
| return size; | |
| out_err: | |
| for_each_buffer_cpu(buffer, cpu) { | |
| struct buffer_page *bpage, *tmp; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| cpu_buffer->nr_pages_to_update = 0; | |
| if (list_empty(&cpu_buffer->new_pages)) | |
| continue; | |
| list_for_each_entry_safe(bpage, tmp, &cpu_buffer->new_pages, | |
| list) { | |
| list_del_init(&bpage->list); | |
| free_buffer_page(bpage); | |
| } | |
| } | |
| mutex_unlock(&buffer->mutex); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_resize); | |
| void ring_buffer_change_overwrite(struct ring_buffer *buffer, int val) | |
| { | |
| mutex_lock(&buffer->mutex); | |
| if (val) | |
| buffer->flags |= RB_FL_OVERWRITE; | |
| else | |
| buffer->flags &= ~RB_FL_OVERWRITE; | |
| mutex_unlock(&buffer->mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_change_overwrite); | |
| static inline void * | |
| __rb_data_page_index(struct buffer_data_page *bpage, unsigned index) | |
| { | |
| return bpage->data + index; | |
| } | |
| static inline void *__rb_page_index(struct buffer_page *bpage, unsigned index) | |
| { | |
| return bpage->page->data + index; | |
| } | |
| static inline struct ring_buffer_event * | |
| rb_reader_event(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| return __rb_page_index(cpu_buffer->reader_page, | |
| cpu_buffer->reader_page->read); | |
| } | |
| static inline struct ring_buffer_event * | |
| rb_iter_head_event(struct ring_buffer_iter *iter) | |
| { | |
| return __rb_page_index(iter->head_page, iter->head); | |
| } | |
| static inline unsigned rb_page_commit(struct buffer_page *bpage) | |
| { | |
| return local_read(&bpage->page->commit); | |
| } | |
| /* Size is determined by what has been committed */ | |
| static inline unsigned rb_page_size(struct buffer_page *bpage) | |
| { | |
| return rb_page_commit(bpage); | |
| } | |
| static inline unsigned | |
| rb_commit_index(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| return rb_page_commit(cpu_buffer->commit_page); | |
| } | |
| static inline unsigned | |
| rb_event_index(struct ring_buffer_event *event) | |
| { | |
| unsigned long addr = (unsigned long)event; | |
| return (addr & ~PAGE_MASK) - BUF_PAGE_HDR_SIZE; | |
| } | |
| static inline int | |
| rb_event_is_commit(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| unsigned long addr = (unsigned long)event; | |
| unsigned long index; | |
| index = rb_event_index(event); | |
| addr &= PAGE_MASK; | |
| return cpu_buffer->commit_page->page == (void *)addr && | |
| rb_commit_index(cpu_buffer) == index; | |
| } | |
| static void | |
| rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| unsigned long max_count; | |
| /* | |
| * We only race with interrupts and NMIs on this CPU. | |
| * If we own the commit event, then we can commit | |
| * all others that interrupted us, since the interruptions | |
| * are in stack format (they finish before they come | |
| * back to us). This allows us to do a simple loop to | |
| * assign the commit to the tail. | |
| */ | |
| again: | |
| max_count = cpu_buffer->nr_pages * 100; | |
| while (cpu_buffer->commit_page != cpu_buffer->tail_page) { | |
| if (RB_WARN_ON(cpu_buffer, !(--max_count))) | |
| return; | |
| if (RB_WARN_ON(cpu_buffer, | |
| rb_is_reader_page(cpu_buffer->tail_page))) | |
| return; | |
| local_set(&cpu_buffer->commit_page->page->commit, | |
| rb_page_write(cpu_buffer->commit_page)); | |
| rb_inc_page(cpu_buffer, &cpu_buffer->commit_page); | |
| cpu_buffer->write_stamp = | |
| cpu_buffer->commit_page->page->time_stamp; | |
| /* add barrier to keep gcc from optimizing too much */ | |
| barrier(); | |
| } | |
| while (rb_commit_index(cpu_buffer) != | |
| rb_page_write(cpu_buffer->commit_page)) { | |
| local_set(&cpu_buffer->commit_page->page->commit, | |
| rb_page_write(cpu_buffer->commit_page)); | |
| RB_WARN_ON(cpu_buffer, | |
| local_read(&cpu_buffer->commit_page->page->commit) & | |
| ~RB_WRITE_MASK); | |
| barrier(); | |
| } | |
| /* again, keep gcc from optimizing */ | |
| barrier(); | |
| /* | |
| * If an interrupt came in just after the first while loop | |
| * and pushed the tail page forward, we will be left with | |
| * a dangling commit that will never go forward. | |
| */ | |
| if (unlikely(cpu_buffer->commit_page != cpu_buffer->tail_page)) | |
| goto again; | |
| } | |
| static void rb_reset_reader_page(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| cpu_buffer->read_stamp = cpu_buffer->reader_page->page->time_stamp; | |
| cpu_buffer->reader_page->read = 0; | |
| } | |
| static void rb_inc_iter(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; | |
| /* | |
| * The iterator could be on the reader page (it starts there). | |
| * But the head could have moved, since the reader was | |
| * found. Check for this case and assign the iterator | |
| * to the head page instead of next. | |
| */ | |
| if (iter->head_page == cpu_buffer->reader_page) | |
| iter->head_page = rb_set_head_page(cpu_buffer); | |
| else | |
| rb_inc_page(cpu_buffer, &iter->head_page); | |
| iter->read_stamp = iter->head_page->page->time_stamp; | |
| iter->head = 0; | |
| } | |
| /* Slow path, do not inline */ | |
| static noinline struct ring_buffer_event * | |
| rb_add_time_stamp(struct ring_buffer_event *event, u64 delta) | |
| { | |
| event->type_len = RINGBUF_TYPE_TIME_EXTEND; | |
| /* Not the first event on the page? */ | |
| if (rb_event_index(event)) { | |
| event->time_delta = delta & TS_MASK; | |
| event->array[0] = delta >> TS_SHIFT; | |
| } else { | |
| /* nope, just zero it */ | |
| event->time_delta = 0; | |
| event->array[0] = 0; | |
| } | |
| return skip_time_extend(event); | |
| } | |
| /** | |
| * rb_update_event - update event type and data | |
| * @event: the even to update | |
| * @type: the type of event | |
| * @length: the size of the event field in the ring buffer | |
| * | |
| * Update the type and data fields of the event. The length | |
| * is the actual size that is written to the ring buffer, | |
| * and with this, we can determine what to place into the | |
| * data field. | |
| */ | |
| static void | |
| rb_update_event(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event, unsigned length, | |
| int add_timestamp, u64 delta) | |
| { | |
| /* Only a commit updates the timestamp */ | |
| if (unlikely(!rb_event_is_commit(cpu_buffer, event))) | |
| delta = 0; | |
| /* | |
| * If we need to add a timestamp, then we | |
| * add it to the start of the resevered space. | |
| */ | |
| if (unlikely(add_timestamp)) { | |
| event = rb_add_time_stamp(event, delta); | |
| length -= RB_LEN_TIME_EXTEND; | |
| delta = 0; | |
| } | |
| event->time_delta = delta; | |
| length -= RB_EVNT_HDR_SIZE; | |
| if (length > RB_MAX_SMALL_DATA || RB_FORCE_8BYTE_ALIGNMENT) { | |
| event->type_len = 0; | |
| event->array[0] = length; | |
| } else | |
| event->type_len = DIV_ROUND_UP(length, RB_ALIGNMENT); | |
| } | |
| /* | |
| * rb_handle_head_page - writer hit the head page | |
| * | |
| * Returns: +1 to retry page | |
| * 0 to continue | |
| * -1 on error | |
| */ | |
| static int | |
| rb_handle_head_page(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *tail_page, | |
| struct buffer_page *next_page) | |
| { | |
| struct buffer_page *new_head; | |
| int entries; | |
| int type; | |
| int ret; | |
| entries = rb_page_entries(next_page); | |
| /* | |
| * The hard part is here. We need to move the head | |
| * forward, and protect against both readers on | |
| * other CPUs and writers coming in via interrupts. | |
| */ | |
| type = rb_head_page_set_update(cpu_buffer, next_page, tail_page, | |
| RB_PAGE_HEAD); | |
| /* | |
| * type can be one of four: | |
| * NORMAL - an interrupt already moved it for us | |
| * HEAD - we are the first to get here. | |
| * UPDATE - we are the interrupt interrupting | |
| * a current move. | |
| * MOVED - a reader on another CPU moved the next | |
| * pointer to its reader page. Give up | |
| * and try again. | |
| */ | |
| switch (type) { | |
| case RB_PAGE_HEAD: | |
| /* | |
| * We changed the head to UPDATE, thus | |
| * it is our responsibility to update | |
| * the counters. | |
| */ | |
| local_add(entries, &cpu_buffer->overrun); | |
| local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes); | |
| /* | |
| * The entries will be zeroed out when we move the | |
| * tail page. | |
| */ | |
| /* still more to do */ | |
| break; | |
| case RB_PAGE_UPDATE: | |
| /* | |
| * This is an interrupt that interrupt the | |
| * previous update. Still more to do. | |
| */ | |
| break; | |
| case RB_PAGE_NORMAL: | |
| /* | |
| * An interrupt came in before the update | |
| * and processed this for us. | |
| * Nothing left to do. | |
| */ | |
| return 1; | |
| case RB_PAGE_MOVED: | |
| /* | |
| * The reader is on another CPU and just did | |
| * a swap with our next_page. | |
| * Try again. | |
| */ | |
| return 1; | |
| default: | |
| RB_WARN_ON(cpu_buffer, 1); /* WTF??? */ | |
| return -1; | |
| } | |
| /* | |
| * Now that we are here, the old head pointer is | |
| * set to UPDATE. This will keep the reader from | |
| * swapping the head page with the reader page. | |
| * The reader (on another CPU) will spin till | |
| * we are finished. | |
| * | |
| * We just need to protect against interrupts | |
| * doing the job. We will set the next pointer | |
| * to HEAD. After that, we set the old pointer | |
| * to NORMAL, but only if it was HEAD before. | |
| * otherwise we are an interrupt, and only | |
| * want the outer most commit to reset it. | |
| */ | |
| new_head = next_page; | |
| rb_inc_page(cpu_buffer, &new_head); | |
| ret = rb_head_page_set_head(cpu_buffer, new_head, next_page, | |
| RB_PAGE_NORMAL); | |
| /* | |
| * Valid returns are: | |
| * HEAD - an interrupt came in and already set it. | |
| * NORMAL - One of two things: | |
| * 1) We really set it. | |
| * 2) A bunch of interrupts came in and moved | |
| * the page forward again. | |
| */ | |
| switch (ret) { | |
| case RB_PAGE_HEAD: | |
| case RB_PAGE_NORMAL: | |
| /* OK */ | |
| break; | |
| default: | |
| RB_WARN_ON(cpu_buffer, 1); | |
| return -1; | |
| } | |
| /* | |
| * It is possible that an interrupt came in, | |
| * set the head up, then more interrupts came in | |
| * and moved it again. When we get back here, | |
| * the page would have been set to NORMAL but we | |
| * just set it back to HEAD. | |
| * | |
| * How do you detect this? Well, if that happened | |
| * the tail page would have moved. | |
| */ | |
| if (ret == RB_PAGE_NORMAL) { | |
| /* | |
| * If the tail had moved passed next, then we need | |
| * to reset the pointer. | |
| */ | |
| if (cpu_buffer->tail_page != tail_page && | |
| cpu_buffer->tail_page != next_page) | |
| rb_head_page_set_normal(cpu_buffer, new_head, | |
| next_page, | |
| RB_PAGE_HEAD); | |
| } | |
| /* | |
| * If this was the outer most commit (the one that | |
| * changed the original pointer from HEAD to UPDATE), | |
| * then it is up to us to reset it to NORMAL. | |
| */ | |
| if (type == RB_PAGE_HEAD) { | |
| ret = rb_head_page_set_normal(cpu_buffer, next_page, | |
| tail_page, | |
| RB_PAGE_UPDATE); | |
| if (RB_WARN_ON(cpu_buffer, | |
| ret != RB_PAGE_UPDATE)) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static unsigned rb_calculate_event_length(unsigned length) | |
| { | |
| struct ring_buffer_event event; /* Used only for sizeof array */ | |
| /* zero length can cause confusions */ | |
| if (!length) | |
| length = 1; | |
| if (length > RB_MAX_SMALL_DATA || RB_FORCE_8BYTE_ALIGNMENT) | |
| length += sizeof(event.array[0]); | |
| length += RB_EVNT_HDR_SIZE; | |
| length = ALIGN(length, RB_ARCH_ALIGNMENT); | |
| return length; | |
| } | |
| static inline void | |
| rb_reset_tail(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct buffer_page *tail_page, | |
| unsigned long tail, unsigned long length) | |
| { | |
| struct ring_buffer_event *event; | |
| /* | |
| * Only the event that crossed the page boundary | |
| * must fill the old tail_page with padding. | |
| */ | |
| if (tail >= BUF_PAGE_SIZE) { | |
| /* | |
| * If the page was filled, then we still need | |
| * to update the real_end. Reset it to zero | |
| * and the reader will ignore it. | |
| */ | |
| if (tail == BUF_PAGE_SIZE) | |
| tail_page->real_end = 0; | |
| local_sub(length, &tail_page->write); | |
| return; | |
| } | |
| event = __rb_page_index(tail_page, tail); | |
| kmemcheck_annotate_bitfield(event, bitfield); | |
| /* account for padding bytes */ | |
| local_add(BUF_PAGE_SIZE - tail, &cpu_buffer->entries_bytes); | |
| /* | |
| * Save the original length to the meta data. | |
| * This will be used by the reader to add lost event | |
| * counter. | |
| */ | |
| tail_page->real_end = tail; | |
| /* | |
| * If this event is bigger than the minimum size, then | |
| * we need to be careful that we don't subtract the | |
| * write counter enough to allow another writer to slip | |
| * in on this page. | |
| * We put in a discarded commit instead, to make sure | |
| * that this space is not used again. | |
| * | |
| * If we are less than the minimum size, we don't need to | |
| * worry about it. | |
| */ | |
| if (tail > (BUF_PAGE_SIZE - RB_EVNT_MIN_SIZE)) { | |
| /* No room for any events */ | |
| /* Mark the rest of the page with padding */ | |
| rb_event_set_padding(event); | |
| /* Set the write back to the previous setting */ | |
| local_sub(length, &tail_page->write); | |
| return; | |
| } | |
| /* Put in a discarded event */ | |
| event->array[0] = (BUF_PAGE_SIZE - tail) - RB_EVNT_HDR_SIZE; | |
| event->type_len = RINGBUF_TYPE_PADDING; | |
| /* time delta must be non zero */ | |
| event->time_delta = 1; | |
| /* Set write to end of buffer */ | |
| length = (tail + length) - BUF_PAGE_SIZE; | |
| local_sub(length, &tail_page->write); | |
| } | |
| /* | |
| * This is the slow path, force gcc not to inline it. | |
| */ | |
| static noinline struct ring_buffer_event * | |
| rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer, | |
| unsigned long length, unsigned long tail, | |
| struct buffer_page *tail_page, u64 ts) | |
| { | |
| struct buffer_page *commit_page = cpu_buffer->commit_page; | |
| struct ring_buffer *buffer = cpu_buffer->buffer; | |
| struct buffer_page *next_page; | |
| int ret; | |
| next_page = tail_page; | |
| rb_inc_page(cpu_buffer, &next_page); | |
| /* | |
| * If for some reason, we had an interrupt storm that made | |
| * it all the way around the buffer, bail, and warn | |
| * about it. | |
| */ | |
| if (unlikely(next_page == commit_page)) { | |
| local_inc(&cpu_buffer->commit_overrun); | |
| goto out_reset; | |
| } | |
| /* | |
| * This is where the fun begins! | |
| * | |
| * We are fighting against races between a reader that | |
| * could be on another CPU trying to swap its reader | |
| * page with the buffer head. | |
| * | |
| * We are also fighting against interrupts coming in and | |
| * moving the head or tail on us as well. | |
| * | |
| * If the next page is the head page then we have filled | |
| * the buffer, unless the commit page is still on the | |
| * reader page. | |
| */ | |
| if (rb_is_head_page(cpu_buffer, next_page, &tail_page->list)) { | |
| /* | |
| * If the commit is not on the reader page, then | |
| * move the header page. | |
| */ | |
| if (!rb_is_reader_page(cpu_buffer->commit_page)) { | |
| /* | |
| * If we are not in overwrite mode, | |
| * this is easy, just stop here. | |
| */ | |
| if (!(buffer->flags & RB_FL_OVERWRITE)) { | |
| local_inc(&cpu_buffer->dropped_events); | |
| goto out_reset; | |
| } | |
| ret = rb_handle_head_page(cpu_buffer, | |
| tail_page, | |
| next_page); | |
| if (ret < 0) | |
| goto out_reset; | |
| if (ret) | |
| goto out_again; | |
| } else { | |
| /* | |
| * We need to be careful here too. The | |
| * commit page could still be on the reader | |
| * page. We could have a small buffer, and | |
| * have filled up the buffer with events | |
| * from interrupts and such, and wrapped. | |
| * | |
| * Note, if the tail page is also the on the | |
| * reader_page, we let it move out. | |
| */ | |
| if (unlikely((cpu_buffer->commit_page != | |
| cpu_buffer->tail_page) && | |
| (cpu_buffer->commit_page == | |
| cpu_buffer->reader_page))) { | |
| local_inc(&cpu_buffer->commit_overrun); | |
| goto out_reset; | |
| } | |
| } | |
| } | |
| ret = rb_tail_page_update(cpu_buffer, tail_page, next_page); | |
| if (ret) { | |
| /* | |
| * Nested commits always have zero deltas, so | |
| * just reread the time stamp | |
| */ | |
| ts = rb_time_stamp(buffer); | |
| next_page->page->time_stamp = ts; | |
| } | |
| out_again: | |
| rb_reset_tail(cpu_buffer, tail_page, tail, length); | |
| /* fail and let the caller try again */ | |
| return ERR_PTR(-EAGAIN); | |
| out_reset: | |
| /* reset write */ | |
| rb_reset_tail(cpu_buffer, tail_page, tail, length); | |
| return NULL; | |
| } | |
| static struct ring_buffer_event * | |
| __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, | |
| unsigned long length, u64 ts, | |
| u64 delta, int add_timestamp) | |
| { | |
| struct buffer_page *tail_page; | |
| struct ring_buffer_event *event; | |
| unsigned long tail, write; | |
| /* | |
| * If the time delta since the last event is too big to | |
| * hold in the time field of the event, then we append a | |
| * TIME EXTEND event ahead of the data event. | |
| */ | |
| if (unlikely(add_timestamp)) | |
| length += RB_LEN_TIME_EXTEND; | |
| tail_page = cpu_buffer->tail_page; | |
| write = local_add_return(length, &tail_page->write); | |
| /* set write to only the index of the write */ | |
| write &= RB_WRITE_MASK; | |
| tail = write - length; | |
| /* See if we shot pass the end of this buffer page */ | |
| if (unlikely(write > BUF_PAGE_SIZE)) | |
| return rb_move_tail(cpu_buffer, length, tail, | |
| tail_page, ts); | |
| /* We reserved something on the buffer */ | |
| event = __rb_page_index(tail_page, tail); | |
| kmemcheck_annotate_bitfield(event, bitfield); | |
| rb_update_event(cpu_buffer, event, length, add_timestamp, delta); | |
| local_inc(&tail_page->entries); | |
| /* | |
| * If this is the first commit on the page, then update | |
| * its timestamp. | |
| */ | |
| if (!tail) | |
| tail_page->page->time_stamp = ts; | |
| /* account for these added bytes */ | |
| local_add(length, &cpu_buffer->entries_bytes); | |
| return event; | |
| } | |
| static inline int | |
| rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| unsigned long new_index, old_index; | |
| struct buffer_page *bpage; | |
| unsigned long index; | |
| unsigned long addr; | |
| new_index = rb_event_index(event); | |
| old_index = new_index + rb_event_ts_length(event); | |
| addr = (unsigned long)event; | |
| addr &= PAGE_MASK; | |
| bpage = cpu_buffer->tail_page; | |
| if (bpage->page == (void *)addr && rb_page_write(bpage) == old_index) { | |
| unsigned long write_mask = | |
| local_read(&bpage->write) & ~RB_WRITE_MASK; | |
| unsigned long event_length = rb_event_length(event); | |
| /* | |
| * This is on the tail page. It is possible that | |
| * a write could come in and move the tail page | |
| * and write to the next page. That is fine | |
| * because we just shorten what is on this page. | |
| */ | |
| old_index += write_mask; | |
| new_index += write_mask; | |
| index = local_cmpxchg(&bpage->write, old_index, new_index); | |
| if (index == old_index) { | |
| /* update counters */ | |
| local_sub(event_length, &cpu_buffer->entries_bytes); | |
| return 1; | |
| } | |
| } | |
| /* could not discard */ | |
| return 0; | |
| } | |
| static void rb_start_commit(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| local_inc(&cpu_buffer->committing); | |
| local_inc(&cpu_buffer->commits); | |
| } | |
| static inline void rb_end_commit(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| unsigned long commits; | |
| if (RB_WARN_ON(cpu_buffer, | |
| !local_read(&cpu_buffer->committing))) | |
| return; | |
| again: | |
| commits = local_read(&cpu_buffer->commits); | |
| /* synchronize with interrupts */ | |
| barrier(); | |
| if (local_read(&cpu_buffer->committing) == 1) | |
| rb_set_commit_to_write(cpu_buffer); | |
| local_dec(&cpu_buffer->committing); | |
| /* synchronize with interrupts */ | |
| barrier(); | |
| /* | |
| * Need to account for interrupts coming in between the | |
| * updating of the commit page and the clearing of the | |
| * committing counter. | |
| */ | |
| if (unlikely(local_read(&cpu_buffer->commits) != commits) && | |
| !local_read(&cpu_buffer->committing)) { | |
| local_inc(&cpu_buffer->committing); | |
| goto again; | |
| } | |
| } | |
| static struct ring_buffer_event * | |
| rb_reserve_next_event(struct ring_buffer *buffer, | |
| struct ring_buffer_per_cpu *cpu_buffer, | |
| unsigned long length) | |
| { | |
| struct ring_buffer_event *event; | |
| u64 ts, delta; | |
| int nr_loops = 0; | |
| int add_timestamp; | |
| u64 diff; | |
| rb_start_commit(cpu_buffer); | |
| #ifdef CONFIG_RING_BUFFER_ALLOW_SWAP | |
| /* | |
| * Due to the ability to swap a cpu buffer from a buffer | |
| * it is possible it was swapped before we committed. | |
| * (committing stops a swap). We check for it here and | |
| * if it happened, we have to fail the write. | |
| */ | |
| barrier(); | |
| if (unlikely(ACCESS_ONCE(cpu_buffer->buffer) != buffer)) { | |
| local_dec(&cpu_buffer->committing); | |
| local_dec(&cpu_buffer->commits); | |
| return NULL; | |
| } | |
| #endif | |
| length = rb_calculate_event_length(length); | |
| again: | |
| add_timestamp = 0; | |
| delta = 0; | |
| /* | |
| * We allow for interrupts to reenter here and do a trace. | |
| * If one does, it will cause this original code to loop | |
| * back here. Even with heavy interrupts happening, this | |
| * should only happen a few times in a row. If this happens | |
| * 1000 times in a row, there must be either an interrupt | |
| * storm or we have something buggy. | |
| * Bail! | |
| */ | |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000)) | |
| goto out_fail; | |
| ts = rb_time_stamp(cpu_buffer->buffer); | |
| diff = ts - cpu_buffer->write_stamp; | |
| /* make sure this diff is calculated here */ | |
| barrier(); | |
| /* Did the write stamp get updated already? */ | |
| if (likely(ts >= cpu_buffer->write_stamp)) { | |
| delta = diff; | |
| if (unlikely(test_time_stamp(delta))) { | |
| int local_clock_stable = 1; | |
| #ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK | |
| local_clock_stable = sched_clock_stable; | |
| #endif | |
| WARN_ONCE(delta > (1ULL << 59), | |
| KERN_WARNING "Delta way too big! %llu ts=%llu write stamp = %llu\n%s", | |
| (unsigned long long)delta, | |
| (unsigned long long)ts, | |
| (unsigned long long)cpu_buffer->write_stamp, | |
| local_clock_stable ? "" : | |
| "If you just came from a suspend/resume,\n" | |
| "please switch to the trace global clock:\n" | |
| " echo global > /sys/kernel/debug/tracing/trace_clock\n"); | |
| add_timestamp = 1; | |
| } | |
| } | |
| event = __rb_reserve_next(cpu_buffer, length, ts, | |
| delta, add_timestamp); | |
| if (unlikely(PTR_ERR(event) == -EAGAIN)) | |
| goto again; | |
| if (!event) | |
| goto out_fail; | |
| return event; | |
| out_fail: | |
| rb_end_commit(cpu_buffer); | |
| return NULL; | |
| } | |
| #ifdef CONFIG_TRACING | |
| /* | |
| * The lock and unlock are done within a preempt disable section. | |
| * The current_context per_cpu variable can only be modified | |
| * by the current task between lock and unlock. But it can | |
| * be modified more than once via an interrupt. To pass this | |
| * information from the lock to the unlock without having to | |
| * access the 'in_interrupt()' functions again (which do show | |
| * a bit of overhead in something as critical as function tracing, | |
| * we use a bitmask trick. | |
| * | |
| * bit 0 = NMI context | |
| * bit 1 = IRQ context | |
| * bit 2 = SoftIRQ context | |
| * bit 3 = normal context. | |
| * | |
| * This works because this is the order of contexts that can | |
| * preempt other contexts. A SoftIRQ never preempts an IRQ | |
| * context. | |
| * | |
| * When the context is determined, the corresponding bit is | |
| * checked and set (if it was set, then a recursion of that context | |
| * happened). | |
| * | |
| * On unlock, we need to clear this bit. To do so, just subtract | |
| * 1 from the current_context and AND it to itself. | |
| * | |
| * (binary) | |
| * 101 - 1 = 100 | |
| * 101 & 100 = 100 (clearing bit zero) | |
| * | |
| * 1010 - 1 = 1001 | |
| * 1010 & 1001 = 1000 (clearing bit 1) | |
| * | |
| * The least significant bit can be cleared this way, and it | |
| * just so happens that it is the same bit corresponding to | |
| * the current context. | |
| */ | |
| static DEFINE_PER_CPU(unsigned int, current_context); | |
| static __always_inline int trace_recursive_lock(void) | |
| { | |
| unsigned int val = this_cpu_read(current_context); | |
| int bit; | |
| if (in_interrupt()) { | |
| if (in_nmi()) | |
| bit = 0; | |
| else if (in_irq()) | |
| bit = 1; | |
| else | |
| bit = 2; | |
| } else | |
| bit = 3; | |
| if (unlikely(val & (1 << bit))) | |
| return 1; | |
| val |= (1 << bit); | |
| this_cpu_write(current_context, val); | |
| return 0; | |
| } | |
| static __always_inline void trace_recursive_unlock(void) | |
| { | |
| unsigned int val = this_cpu_read(current_context); | |
| val--; | |
| val &= this_cpu_read(current_context); | |
| this_cpu_write(current_context, val); | |
| } | |
| #else | |
| #define trace_recursive_lock() (0) | |
| #define trace_recursive_unlock() do { } while (0) | |
| #endif | |
| /** | |
| * ring_buffer_lock_reserve - reserve a part of the buffer | |
| * @buffer: the ring buffer to reserve from | |
| * @length: the length of the data to reserve (excluding event header) | |
| * | |
| * Returns a reseverd event on the ring buffer to copy directly to. | |
| * The user of this interface will need to get the body to write into | |
| * and can use the ring_buffer_event_data() interface. | |
| * | |
| * The length is the length of the data needed, not the event length | |
| * which also includes the event header. | |
| * | |
| * Must be paired with ring_buffer_unlock_commit, unless NULL is returned. | |
| * If NULL is returned, then nothing has been allocated or locked. | |
| */ | |
| struct ring_buffer_event * | |
| ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct ring_buffer_event *event; | |
| int cpu; | |
| if (ring_buffer_flags != RB_BUFFERS_ON) | |
| return NULL; | |
| /* If we are tracing schedule, we don't want to recurse */ | |
| preempt_disable_notrace(); | |
| if (atomic_read(&buffer->record_disabled)) | |
| goto out_nocheck; | |
| if (trace_recursive_lock()) | |
| goto out_nocheck; | |
| cpu = raw_smp_processor_id(); | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| goto out; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| if (atomic_read(&cpu_buffer->record_disabled)) | |
| goto out; | |
| if (length > BUF_MAX_DATA_SIZE) | |
| goto out; | |
| event = rb_reserve_next_event(buffer, cpu_buffer, length); | |
| if (!event) | |
| goto out; | |
| return event; | |
| out: | |
| trace_recursive_unlock(); | |
| out_nocheck: | |
| preempt_enable_notrace(); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_lock_reserve); | |
| static void | |
| rb_update_write_stamp(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| u64 delta; | |
| /* | |
| * The event first in the commit queue updates the | |
| * time stamp. | |
| */ | |
| if (rb_event_is_commit(cpu_buffer, event)) { | |
| /* | |
| * A commit event that is first on a page | |
| * updates the write timestamp with the page stamp | |
| */ | |
| if (!rb_event_index(event)) | |
| cpu_buffer->write_stamp = | |
| cpu_buffer->commit_page->page->time_stamp; | |
| else if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) { | |
| delta = event->array[0]; | |
| delta <<= TS_SHIFT; | |
| delta += event->time_delta; | |
| cpu_buffer->write_stamp += delta; | |
| } else | |
| cpu_buffer->write_stamp += event->time_delta; | |
| } | |
| } | |
| static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| local_inc(&cpu_buffer->entries); | |
| rb_update_write_stamp(cpu_buffer, event); | |
| rb_end_commit(cpu_buffer); | |
| } | |
| static __always_inline void | |
| rb_wakeups(struct ring_buffer *buffer, struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| if (buffer->irq_work.waiters_pending) { | |
| buffer->irq_work.waiters_pending = false; | |
| /* irq_work_queue() supplies it's own memory barriers */ | |
| irq_work_queue(&buffer->irq_work.work); | |
| } | |
| if (cpu_buffer->irq_work.waiters_pending) { | |
| cpu_buffer->irq_work.waiters_pending = false; | |
| /* irq_work_queue() supplies it's own memory barriers */ | |
| irq_work_queue(&cpu_buffer->irq_work.work); | |
| } | |
| } | |
| /** | |
| * ring_buffer_unlock_commit - commit a reserved | |
| * @buffer: The buffer to commit to | |
| * @event: The event pointer to commit. | |
| * | |
| * This commits the data to the ring buffer, and releases any locks held. | |
| * | |
| * Must be paired with ring_buffer_lock_reserve. | |
| */ | |
| int ring_buffer_unlock_commit(struct ring_buffer *buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| int cpu = raw_smp_processor_id(); | |
| cpu_buffer = buffer->buffers[cpu]; | |
| rb_commit(cpu_buffer, event); | |
| rb_wakeups(buffer, cpu_buffer); | |
| trace_recursive_unlock(); | |
| preempt_enable_notrace(); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_unlock_commit); | |
| static inline void rb_event_discard(struct ring_buffer_event *event) | |
| { | |
| if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) | |
| event = skip_time_extend(event); | |
| /* array[0] holds the actual length for the discarded event */ | |
| event->array[0] = rb_event_data_length(event) - RB_EVNT_HDR_SIZE; | |
| event->type_len = RINGBUF_TYPE_PADDING; | |
| /* time delta must be non zero */ | |
| if (!event->time_delta) | |
| event->time_delta = 1; | |
| } | |
| /* | |
| * Decrement the entries to the page that an event is on. | |
| * The event does not even need to exist, only the pointer | |
| * to the page it is on. This may only be called before the commit | |
| * takes place. | |
| */ | |
| static inline void | |
| rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| unsigned long addr = (unsigned long)event; | |
| struct buffer_page *bpage = cpu_buffer->commit_page; | |
| struct buffer_page *start; | |
| addr &= PAGE_MASK; | |
| /* Do the likely case first */ | |
| if (likely(bpage->page == (void *)addr)) { | |
| local_dec(&bpage->entries); | |
| return; | |
| } | |
| /* | |
| * Because the commit page may be on the reader page we | |
| * start with the next page and check the end loop there. | |
| */ | |
| rb_inc_page(cpu_buffer, &bpage); | |
| start = bpage; | |
| do { | |
| if (bpage->page == (void *)addr) { | |
| local_dec(&bpage->entries); | |
| return; | |
| } | |
| rb_inc_page(cpu_buffer, &bpage); | |
| } while (bpage != start); | |
| /* commit not part of this buffer?? */ | |
| RB_WARN_ON(cpu_buffer, 1); | |
| } | |
| /** | |
| * ring_buffer_commit_discard - discard an event that has not been committed | |
| * @buffer: the ring buffer | |
| * @event: non committed event to discard | |
| * | |
| * Sometimes an event that is in the ring buffer needs to be ignored. | |
| * This function lets the user discard an event in the ring buffer | |
| * and then that event will not be read later. | |
| * | |
| * This function only works if it is called before the the item has been | |
| * committed. It will try to free the event from the ring buffer | |
| * if another event has not been added behind it. | |
| * | |
| * If another event has been added behind it, it will set the event | |
| * up as discarded, and perform the commit. | |
| * | |
| * If this function is called, do not call ring_buffer_unlock_commit on | |
| * the event. | |
| */ | |
| void ring_buffer_discard_commit(struct ring_buffer *buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| int cpu; | |
| /* The event is discarded regardless */ | |
| rb_event_discard(event); | |
| cpu = smp_processor_id(); | |
| cpu_buffer = buffer->buffers[cpu]; | |
| /* | |
| * This must only be called if the event has not been | |
| * committed yet. Thus we can assume that preemption | |
| * is still disabled. | |
| */ | |
| RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing)); | |
| rb_decrement_entry(cpu_buffer, event); | |
| if (rb_try_to_discard(cpu_buffer, event)) | |
| goto out; | |
| /* | |
| * The commit is still visible by the reader, so we | |
| * must still update the timestamp. | |
| */ | |
| rb_update_write_stamp(cpu_buffer, event); | |
| out: | |
| rb_end_commit(cpu_buffer); | |
| trace_recursive_unlock(); | |
| preempt_enable_notrace(); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_discard_commit); | |
| /** | |
| * ring_buffer_write - write data to the buffer without reserving | |
| * @buffer: The ring buffer to write to. | |
| * @length: The length of the data being written (excluding the event header) | |
| * @data: The data to write to the buffer. | |
| * | |
| * This is like ring_buffer_lock_reserve and ring_buffer_unlock_commit as | |
| * one function. If you already have the data to write to the buffer, it | |
| * may be easier to simply call this function. | |
| * | |
| * Note, like ring_buffer_lock_reserve, the length is the length of the data | |
| * and not the length of the event which would hold the header. | |
| */ | |
| int ring_buffer_write(struct ring_buffer *buffer, | |
| unsigned long length, | |
| void *data) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct ring_buffer_event *event; | |
| void *body; | |
| int ret = -EBUSY; | |
| int cpu; | |
| if (ring_buffer_flags != RB_BUFFERS_ON) | |
| return -EBUSY; | |
| preempt_disable_notrace(); | |
| if (atomic_read(&buffer->record_disabled)) | |
| goto out; | |
| cpu = raw_smp_processor_id(); | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| goto out; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| if (atomic_read(&cpu_buffer->record_disabled)) | |
| goto out; | |
| if (length > BUF_MAX_DATA_SIZE) | |
| goto out; | |
| event = rb_reserve_next_event(buffer, cpu_buffer, length); | |
| if (!event) | |
| goto out; | |
| body = rb_event_data(event); | |
| memcpy(body, data, length); | |
| rb_commit(cpu_buffer, event); | |
| rb_wakeups(buffer, cpu_buffer); | |
| ret = 0; | |
| out: | |
| preempt_enable_notrace(); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_write); | |
| static int rb_per_cpu_empty(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct buffer_page *reader = cpu_buffer->reader_page; | |
| struct buffer_page *head = rb_set_head_page(cpu_buffer); | |
| struct buffer_page *commit = cpu_buffer->commit_page; | |
| /* In case of error, head will be NULL */ | |
| if (unlikely(!head)) | |
| return 1; | |
| return reader->read == rb_page_commit(reader) && | |
| (commit == reader || | |
| (commit == head && | |
| head->read == rb_page_commit(commit))); | |
| } | |
| /** | |
| * ring_buffer_record_disable - stop all writes into the buffer | |
| * @buffer: The ring buffer to stop writes to. | |
| * | |
| * This prevents all writes to the buffer. Any attempt to write | |
| * to the buffer after this will fail and return NULL. | |
| * | |
| * The caller should call synchronize_sched() after this. | |
| */ | |
| void ring_buffer_record_disable(struct ring_buffer *buffer) | |
| { | |
| atomic_inc(&buffer->record_disabled); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_record_disable); | |
| /** | |
| * ring_buffer_record_enable - enable writes to the buffer | |
| * @buffer: The ring buffer to enable writes | |
| * | |
| * Note, multiple disables will need the same number of enables | |
| * to truly enable the writing (much like preempt_disable). | |
| */ | |
| void ring_buffer_record_enable(struct ring_buffer *buffer) | |
| { | |
| atomic_dec(&buffer->record_disabled); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_record_enable); | |
| /** | |
| * ring_buffer_record_off - stop all writes into the buffer | |
| * @buffer: The ring buffer to stop writes to. | |
| * | |
| * This prevents all writes to the buffer. Any attempt to write | |
| * to the buffer after this will fail and return NULL. | |
| * | |
| * This is different than ring_buffer_record_disable() as | |
| * it works like an on/off switch, where as the disable() version | |
| * must be paired with a enable(). | |
| */ | |
| void ring_buffer_record_off(struct ring_buffer *buffer) | |
| { | |
| unsigned int rd; | |
| unsigned int new_rd; | |
| do { | |
| rd = atomic_read(&buffer->record_disabled); | |
| new_rd = rd | RB_BUFFER_OFF; | |
| } while (atomic_cmpxchg(&buffer->record_disabled, rd, new_rd) != rd); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_record_off); | |
| /** | |
| * ring_buffer_record_on - restart writes into the buffer | |
| * @buffer: The ring buffer to start writes to. | |
| * | |
| * This enables all writes to the buffer that was disabled by | |
| * ring_buffer_record_off(). | |
| * | |
| * This is different than ring_buffer_record_enable() as | |
| * it works like an on/off switch, where as the enable() version | |
| * must be paired with a disable(). | |
| */ | |
| void ring_buffer_record_on(struct ring_buffer *buffer) | |
| { | |
| unsigned int rd; | |
| unsigned int new_rd; | |
| do { | |
| rd = atomic_read(&buffer->record_disabled); | |
| new_rd = rd & ~RB_BUFFER_OFF; | |
| } while (atomic_cmpxchg(&buffer->record_disabled, rd, new_rd) != rd); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_record_on); | |
| /** | |
| * ring_buffer_record_is_on - return true if the ring buffer can write | |
| * @buffer: The ring buffer to see if write is enabled | |
| * | |
| * Returns true if the ring buffer is in a state that it accepts writes. | |
| */ | |
| int ring_buffer_record_is_on(struct ring_buffer *buffer) | |
| { | |
| return !atomic_read(&buffer->record_disabled); | |
| } | |
| /** | |
| * ring_buffer_record_disable_cpu - stop all writes into the cpu_buffer | |
| * @buffer: The ring buffer to stop writes to. | |
| * @cpu: The CPU buffer to stop | |
| * | |
| * This prevents all writes to the buffer. Any attempt to write | |
| * to the buffer after this will fail and return NULL. | |
| * | |
| * The caller should call synchronize_sched() after this. | |
| */ | |
| void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| atomic_inc(&cpu_buffer->record_disabled); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_record_disable_cpu); | |
| /** | |
| * ring_buffer_record_enable_cpu - enable writes to the buffer | |
| * @buffer: The ring buffer to enable writes | |
| * @cpu: The CPU to enable. | |
| * | |
| * Note, multiple disables will need the same number of enables | |
| * to truly enable the writing (much like preempt_disable). | |
| */ | |
| void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| atomic_dec(&cpu_buffer->record_disabled); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_record_enable_cpu); | |
| /* | |
| * The total entries in the ring buffer is the running counter | |
| * of entries entered into the ring buffer, minus the sum of | |
| * the entries read from the ring buffer and the number of | |
| * entries that were overwritten. | |
| */ | |
| static inline unsigned long | |
| rb_num_of_entries(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| return local_read(&cpu_buffer->entries) - | |
| (local_read(&cpu_buffer->overrun) + cpu_buffer->read); | |
| } | |
| /** | |
| * ring_buffer_oldest_event_ts - get the oldest event timestamp from the buffer | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to read from. | |
| */ | |
| u64 ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu) | |
| { | |
| unsigned long flags; | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct buffer_page *bpage; | |
| u64 ret = 0; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| /* | |
| * if the tail is on reader_page, oldest time stamp is on the reader | |
| * page | |
| */ | |
| if (cpu_buffer->tail_page == cpu_buffer->reader_page) | |
| bpage = cpu_buffer->reader_page; | |
| else | |
| bpage = rb_set_head_page(cpu_buffer); | |
| if (bpage) | |
| ret = bpage->page->time_stamp; | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_oldest_event_ts); | |
| /** | |
| * ring_buffer_bytes_cpu - get the number of bytes consumed in a cpu buffer | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to read from. | |
| */ | |
| unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long ret; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| ret = local_read(&cpu_buffer->entries_bytes) - cpu_buffer->read_bytes; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_bytes_cpu); | |
| /** | |
| * ring_buffer_entries_cpu - get the number of entries in a cpu buffer | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to get the entries from. | |
| */ | |
| unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| return rb_num_of_entries(cpu_buffer); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_entries_cpu); | |
| /** | |
| * ring_buffer_overrun_cpu - get the number of overruns caused by the ring | |
| * buffer wrapping around (only if RB_FL_OVERWRITE is on). | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to get the number of overruns from | |
| */ | |
| unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long ret; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| ret = local_read(&cpu_buffer->overrun); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu); | |
| /** | |
| * ring_buffer_commit_overrun_cpu - get the number of overruns caused by | |
| * commits failing due to the buffer wrapping around while there are uncommitted | |
| * events, such as during an interrupt storm. | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to get the number of overruns from | |
| */ | |
| unsigned long | |
| ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long ret; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| ret = local_read(&cpu_buffer->commit_overrun); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_commit_overrun_cpu); | |
| /** | |
| * ring_buffer_dropped_events_cpu - get the number of dropped events caused by | |
| * the ring buffer filling up (only if RB_FL_OVERWRITE is off). | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to get the number of overruns from | |
| */ | |
| unsigned long | |
| ring_buffer_dropped_events_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long ret; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| ret = local_read(&cpu_buffer->dropped_events); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_dropped_events_cpu); | |
| /** | |
| * ring_buffer_read_events_cpu - get the number of events successfully read | |
| * @buffer: The ring buffer | |
| * @cpu: The per CPU buffer to get the number of events read | |
| */ | |
| unsigned long | |
| ring_buffer_read_events_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| return cpu_buffer->read; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read_events_cpu); | |
| /** | |
| * ring_buffer_entries - get the number of entries in a buffer | |
| * @buffer: The ring buffer | |
| * | |
| * Returns the total number of entries in the ring buffer | |
| * (all CPU entries) | |
| */ | |
| unsigned long ring_buffer_entries(struct ring_buffer *buffer) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long entries = 0; | |
| int cpu; | |
| /* if you care about this being correct, lock the buffer */ | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| entries += rb_num_of_entries(cpu_buffer); | |
| } | |
| return entries; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_entries); | |
| /** | |
| * ring_buffer_overruns - get the number of overruns in buffer | |
| * @buffer: The ring buffer | |
| * | |
| * Returns the total number of overruns in the ring buffer | |
| * (all CPU entries) | |
| */ | |
| unsigned long ring_buffer_overruns(struct ring_buffer *buffer) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long overruns = 0; | |
| int cpu; | |
| /* if you care about this being correct, lock the buffer */ | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| overruns += local_read(&cpu_buffer->overrun); | |
| } | |
| return overruns; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_overruns); | |
| static void rb_iter_reset(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; | |
| /* Iterator usage is expected to have record disabled */ | |
| if (list_empty(&cpu_buffer->reader_page->list)) { | |
| iter->head_page = rb_set_head_page(cpu_buffer); | |
| if (unlikely(!iter->head_page)) | |
| return; | |
| iter->head = iter->head_page->read; | |
| } else { | |
| iter->head_page = cpu_buffer->reader_page; | |
| iter->head = cpu_buffer->reader_page->read; | |
| } | |
| if (iter->head) | |
| iter->read_stamp = cpu_buffer->read_stamp; | |
| else | |
| iter->read_stamp = iter->head_page->page->time_stamp; | |
| iter->cache_reader_page = cpu_buffer->reader_page; | |
| iter->cache_read = cpu_buffer->read; | |
| } | |
| /** | |
| * ring_buffer_iter_reset - reset an iterator | |
| * @iter: The iterator to reset | |
| * | |
| * Resets the iterator, so that it will start from the beginning | |
| * again. | |
| */ | |
| void ring_buffer_iter_reset(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long flags; | |
| if (!iter) | |
| return; | |
| cpu_buffer = iter->cpu_buffer; | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| rb_iter_reset(iter); | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_iter_reset); | |
| /** | |
| * ring_buffer_iter_empty - check if an iterator has no more to read | |
| * @iter: The iterator to check | |
| */ | |
| int ring_buffer_iter_empty(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| cpu_buffer = iter->cpu_buffer; | |
| return iter->head_page == cpu_buffer->commit_page && | |
| iter->head == rb_commit_index(cpu_buffer); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_iter_empty); | |
| static void | |
| rb_update_read_stamp(struct ring_buffer_per_cpu *cpu_buffer, | |
| struct ring_buffer_event *event) | |
| { | |
| u64 delta; | |
| switch (event->type_len) { | |
| case RINGBUF_TYPE_PADDING: | |
| return; | |
| case RINGBUF_TYPE_TIME_EXTEND: | |
| delta = event->array[0]; | |
| delta <<= TS_SHIFT; | |
| delta += event->time_delta; | |
| cpu_buffer->read_stamp += delta; | |
| return; | |
| case RINGBUF_TYPE_TIME_STAMP: | |
| /* FIXME: not implemented */ | |
| return; | |
| case RINGBUF_TYPE_DATA: | |
| cpu_buffer->read_stamp += event->time_delta; | |
| return; | |
| default: | |
| BUG(); | |
| } | |
| return; | |
| } | |
| static void | |
| rb_update_iter_read_stamp(struct ring_buffer_iter *iter, | |
| struct ring_buffer_event *event) | |
| { | |
| u64 delta; | |
| switch (event->type_len) { | |
| case RINGBUF_TYPE_PADDING: | |
| return; | |
| case RINGBUF_TYPE_TIME_EXTEND: | |
| delta = event->array[0]; | |
| delta <<= TS_SHIFT; | |
| delta += event->time_delta; | |
| iter->read_stamp += delta; | |
| return; | |
| case RINGBUF_TYPE_TIME_STAMP: | |
| /* FIXME: not implemented */ | |
| return; | |
| case RINGBUF_TYPE_DATA: | |
| iter->read_stamp += event->time_delta; | |
| return; | |
| default: | |
| BUG(); | |
| } | |
| return; | |
| } | |
| static struct buffer_page * | |
| rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct buffer_page *reader = NULL; | |
| unsigned long overwrite; | |
| unsigned long flags; | |
| int nr_loops = 0; | |
| int ret; | |
| local_irq_save(flags); | |
| arch_spin_lock(&cpu_buffer->lock); | |
| again: | |
| /* | |
| * This should normally only loop twice. But because the | |
| * start of the reader inserts an empty page, it causes | |
| * a case where we will loop three times. There should be no | |
| * reason to loop four times (that I know of). | |
| */ | |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3)) { | |
| reader = NULL; | |
| goto out; | |
| } | |
| reader = cpu_buffer->reader_page; | |
| /* If there's more to read, return this page */ | |
| if (cpu_buffer->reader_page->read < rb_page_size(reader)) | |
| goto out; | |
| /* Never should we have an index greater than the size */ | |
| if (RB_WARN_ON(cpu_buffer, | |
| cpu_buffer->reader_page->read > rb_page_size(reader))) | |
| goto out; | |
| /* check if we caught up to the tail */ | |
| reader = NULL; | |
| if (cpu_buffer->commit_page == cpu_buffer->reader_page) | |
| goto out; | |
| /* Don't bother swapping if the ring buffer is empty */ | |
| if (rb_num_of_entries(cpu_buffer) == 0) | |
| goto out; | |
| /* | |
| * Reset the reader page to size zero. | |
| */ | |
| local_set(&cpu_buffer->reader_page->write, 0); | |
| local_set(&cpu_buffer->reader_page->entries, 0); | |
| local_set(&cpu_buffer->reader_page->page->commit, 0); | |
| cpu_buffer->reader_page->real_end = 0; | |
| spin: | |
| /* | |
| * Splice the empty reader page into the list around the head. | |
| */ | |
| reader = rb_set_head_page(cpu_buffer); | |
| if (!reader) | |
| goto out; | |
| cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next); | |
| cpu_buffer->reader_page->list.prev = reader->list.prev; | |
| /* | |
| * cpu_buffer->pages just needs to point to the buffer, it | |
| * has no specific buffer page to point to. Lets move it out | |
| * of our way so we don't accidentally swap it. | |
| */ | |
| cpu_buffer->pages = reader->list.prev; | |
| /* The reader page will be pointing to the new head */ | |
| rb_set_list_to_head(cpu_buffer, &cpu_buffer->reader_page->list); | |
| /* | |
| * We want to make sure we read the overruns after we set up our | |
| * pointers to the next object. The writer side does a | |
| * cmpxchg to cross pages which acts as the mb on the writer | |
| * side. Note, the reader will constantly fail the swap | |
| * while the writer is updating the pointers, so this | |
| * guarantees that the overwrite recorded here is the one we | |
| * want to compare with the last_overrun. | |
| */ | |
| smp_mb(); | |
| overwrite = local_read(&(cpu_buffer->overrun)); | |
| /* | |
| * Here's the tricky part. | |
| * | |
| * We need to move the pointer past the header page. | |
| * But we can only do that if a writer is not currently | |
| * moving it. The page before the header page has the | |
| * flag bit '1' set if it is pointing to the page we want. | |
| * but if the writer is in the process of moving it | |
| * than it will be '2' or already moved '0'. | |
| */ | |
| ret = rb_head_page_replace(reader, cpu_buffer->reader_page); | |
| /* | |
| * If we did not convert it, then we must try again. | |
| */ | |
| if (!ret) | |
| goto spin; | |
| /* | |
| * Yeah! We succeeded in replacing the page. | |
| * | |
| * Now make the new head point back to the reader page. | |
| */ | |
| rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; | |
| rb_inc_page(cpu_buffer, &cpu_buffer->head_page); | |
| /* Finally update the reader page to the new head */ | |
| cpu_buffer->reader_page = reader; | |
| rb_reset_reader_page(cpu_buffer); | |
| if (overwrite != cpu_buffer->last_overrun) { | |
| cpu_buffer->lost_events = overwrite - cpu_buffer->last_overrun; | |
| cpu_buffer->last_overrun = overwrite; | |
| } | |
| goto again; | |
| out: | |
| arch_spin_unlock(&cpu_buffer->lock); | |
| local_irq_restore(flags); | |
| return reader; | |
| } | |
| static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| struct ring_buffer_event *event; | |
| struct buffer_page *reader; | |
| unsigned length; | |
| reader = rb_get_reader_page(cpu_buffer); | |
| /* This function should not be called when buffer is empty */ | |
| if (RB_WARN_ON(cpu_buffer, !reader)) | |
| return; | |
| event = rb_reader_event(cpu_buffer); | |
| if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX) | |
| cpu_buffer->read++; | |
| rb_update_read_stamp(cpu_buffer, event); | |
| length = rb_event_length(event); | |
| cpu_buffer->reader_page->read += length; | |
| } | |
| static void rb_advance_iter(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct ring_buffer_event *event; | |
| unsigned length; | |
| cpu_buffer = iter->cpu_buffer; | |
| /* | |
| * Check if we are at the end of the buffer. | |
| */ | |
| if (iter->head >= rb_page_size(iter->head_page)) { | |
| /* discarded commits can make the page empty */ | |
| if (iter->head_page == cpu_buffer->commit_page) | |
| return; | |
| rb_inc_iter(iter); | |
| return; | |
| } | |
| event = rb_iter_head_event(iter); | |
| length = rb_event_length(event); | |
| /* | |
| * This should not be called to advance the header if we are | |
| * at the tail of the buffer. | |
| */ | |
| if (RB_WARN_ON(cpu_buffer, | |
| (iter->head_page == cpu_buffer->commit_page) && | |
| (iter->head + length > rb_commit_index(cpu_buffer)))) | |
| return; | |
| rb_update_iter_read_stamp(iter, event); | |
| iter->head += length; | |
| /* check for end of page padding */ | |
| if ((iter->head >= rb_page_size(iter->head_page)) && | |
| (iter->head_page != cpu_buffer->commit_page)) | |
| rb_inc_iter(iter); | |
| } | |
| static int rb_lost_events(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| return cpu_buffer->lost_events; | |
| } | |
| static struct ring_buffer_event * | |
| rb_buffer_peek(struct ring_buffer_per_cpu *cpu_buffer, u64 *ts, | |
| unsigned long *lost_events) | |
| { | |
| struct ring_buffer_event *event; | |
| struct buffer_page *reader; | |
| int nr_loops = 0; | |
| again: | |
| /* | |
| * We repeat when a time extend is encountered. | |
| * Since the time extend is always attached to a data event, | |
| * we should never loop more than once. | |
| * (We never hit the following condition more than twice). | |
| */ | |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 2)) | |
| return NULL; | |
| reader = rb_get_reader_page(cpu_buffer); | |
| if (!reader) | |
| return NULL; | |
| event = rb_reader_event(cpu_buffer); | |
| switch (event->type_len) { | |
| case RINGBUF_TYPE_PADDING: | |
| if (rb_null_event(event)) | |
| RB_WARN_ON(cpu_buffer, 1); | |
| /* | |
| * Because the writer could be discarding every | |
| * event it creates (which would probably be bad) | |
| * if we were to go back to "again" then we may never | |
| * catch up, and will trigger the warn on, or lock | |
| * the box. Return the padding, and we will release | |
| * the current locks, and try again. | |
| */ | |
| return event; | |
| case RINGBUF_TYPE_TIME_EXTEND: | |
| /* Internal data, OK to advance */ | |
| rb_advance_reader(cpu_buffer); | |
| goto again; | |
| case RINGBUF_TYPE_TIME_STAMP: | |
| /* FIXME: not implemented */ | |
| rb_advance_reader(cpu_buffer); | |
| goto again; | |
| case RINGBUF_TYPE_DATA: | |
| if (ts) { | |
| *ts = cpu_buffer->read_stamp + event->time_delta; | |
| ring_buffer_normalize_time_stamp(cpu_buffer->buffer, | |
| cpu_buffer->cpu, ts); | |
| } | |
| if (lost_events) | |
| *lost_events = rb_lost_events(cpu_buffer); | |
| return event; | |
| default: | |
| BUG(); | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_peek); | |
| static struct ring_buffer_event * | |
| rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts) | |
| { | |
| struct ring_buffer *buffer; | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct ring_buffer_event *event; | |
| int nr_loops = 0; | |
| cpu_buffer = iter->cpu_buffer; | |
| buffer = cpu_buffer->buffer; | |
| /* | |
| * Check if someone performed a consuming read to | |
| * the buffer. A consuming read invalidates the iterator | |
| * and we need to reset the iterator in this case. | |
| */ | |
| if (unlikely(iter->cache_read != cpu_buffer->read || | |
| iter->cache_reader_page != cpu_buffer->reader_page)) | |
| rb_iter_reset(iter); | |
| again: | |
| if (ring_buffer_iter_empty(iter)) | |
| return NULL; | |
| /* | |
| * We repeat when a time extend is encountered. | |
| * Since the time extend is always attached to a data event, | |
| * we should never loop more than once. | |
| * (We never hit the following condition more than twice). | |
| */ | |
| if (RB_WARN_ON(cpu_buffer, ++nr_loops > 2)) | |
| return NULL; | |
| if (rb_per_cpu_empty(cpu_buffer)) | |
| return NULL; | |
| if (iter->head >= local_read(&iter->head_page->page->commit)) { | |
| rb_inc_iter(iter); | |
| goto again; | |
| } | |
| event = rb_iter_head_event(iter); | |
| switch (event->type_len) { | |
| case RINGBUF_TYPE_PADDING: | |
| if (rb_null_event(event)) { | |
| rb_inc_iter(iter); | |
| goto again; | |
| } | |
| rb_advance_iter(iter); | |
| return event; | |
| case RINGBUF_TYPE_TIME_EXTEND: | |
| /* Internal data, OK to advance */ | |
| rb_advance_iter(iter); | |
| goto again; | |
| case RINGBUF_TYPE_TIME_STAMP: | |
| /* FIXME: not implemented */ | |
| rb_advance_iter(iter); | |
| goto again; | |
| case RINGBUF_TYPE_DATA: | |
| if (ts) { | |
| *ts = iter->read_stamp + event->time_delta; | |
| ring_buffer_normalize_time_stamp(buffer, | |
| cpu_buffer->cpu, ts); | |
| } | |
| return event; | |
| default: | |
| BUG(); | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_iter_peek); | |
| static inline int rb_ok_to_lock(void) | |
| { | |
| /* | |
| * If an NMI die dumps out the content of the ring buffer | |
| * do not grab locks. We also permanently disable the ring | |
| * buffer too. A one time deal is all you get from reading | |
| * the ring buffer from an NMI. | |
| */ | |
| if (likely(!in_nmi())) | |
| return 1; | |
| tracing_off_permanent(); | |
| return 0; | |
| } | |
| /** | |
| * ring_buffer_peek - peek at the next event to be read | |
| * @buffer: The ring buffer to read | |
| * @cpu: The cpu to peak at | |
| * @ts: The timestamp counter of this event. | |
| * @lost_events: a variable to store if events were lost (may be NULL) | |
| * | |
| * This will return the event that will be read next, but does | |
| * not consume the data. | |
| */ | |
| struct ring_buffer_event * | |
| ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts, | |
| unsigned long *lost_events) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; | |
| struct ring_buffer_event *event; | |
| unsigned long flags; | |
| int dolock; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return NULL; | |
| dolock = rb_ok_to_lock(); | |
| again: | |
| local_irq_save(flags); | |
| if (dolock) | |
| raw_spin_lock(&cpu_buffer->reader_lock); | |
| event = rb_buffer_peek(cpu_buffer, ts, lost_events); | |
| if (event && event->type_len == RINGBUF_TYPE_PADDING) | |
| rb_advance_reader(cpu_buffer); | |
| if (dolock) | |
| raw_spin_unlock(&cpu_buffer->reader_lock); | |
| local_irq_restore(flags); | |
| if (event && event->type_len == RINGBUF_TYPE_PADDING) | |
| goto again; | |
| return event; | |
| } | |
| /** | |
| * ring_buffer_iter_peek - peek at the next event to be read | |
| * @iter: The ring buffer iterator | |
| * @ts: The timestamp counter of this event. | |
| * | |
| * This will return the event that will be read next, but does | |
| * not increment the iterator. | |
| */ | |
| struct ring_buffer_event * | |
| ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; | |
| struct ring_buffer_event *event; | |
| unsigned long flags; | |
| again: | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| event = rb_iter_peek(iter, ts); | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| if (event && event->type_len == RINGBUF_TYPE_PADDING) | |
| goto again; | |
| return event; | |
| } | |
| /** | |
| * ring_buffer_consume - return an event and consume it | |
| * @buffer: The ring buffer to get the next event from | |
| * @cpu: the cpu to read the buffer from | |
| * @ts: a variable to store the timestamp (may be NULL) | |
| * @lost_events: a variable to store if events were lost (may be NULL) | |
| * | |
| * Returns the next event in the ring buffer, and that event is consumed. | |
| * Meaning, that sequential reads will keep returning a different event, | |
| * and eventually empty the ring buffer if the producer is slower. | |
| */ | |
| struct ring_buffer_event * | |
| ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts, | |
| unsigned long *lost_events) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct ring_buffer_event *event = NULL; | |
| unsigned long flags; | |
| int dolock; | |
| dolock = rb_ok_to_lock(); | |
| again: | |
| /* might be called in atomic */ | |
| preempt_disable(); | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| goto out; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| local_irq_save(flags); | |
| if (dolock) | |
| raw_spin_lock(&cpu_buffer->reader_lock); | |
| event = rb_buffer_peek(cpu_buffer, ts, lost_events); | |
| if (event) { | |
| cpu_buffer->lost_events = 0; | |
| rb_advance_reader(cpu_buffer); | |
| } | |
| if (dolock) | |
| raw_spin_unlock(&cpu_buffer->reader_lock); | |
| local_irq_restore(flags); | |
| out: | |
| preempt_enable(); | |
| if (event && event->type_len == RINGBUF_TYPE_PADDING) | |
| goto again; | |
| return event; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_consume); | |
| /** | |
| * ring_buffer_read_prepare - Prepare for a non consuming read of the buffer | |
| * @buffer: The ring buffer to read from | |
| * @cpu: The cpu buffer to iterate over | |
| * | |
| * This performs the initial preparations necessary to iterate | |
| * through the buffer. Memory is allocated, buffer recording | |
| * is disabled, and the iterator pointer is returned to the caller. | |
| * | |
| * Disabling buffer recordng prevents the reading from being | |
| * corrupted. This is not a consuming read, so a producer is not | |
| * expected. | |
| * | |
| * After a sequence of ring_buffer_read_prepare calls, the user is | |
| * expected to make at least one call to ring_buffer_read_prepare_sync. | |
| * Afterwards, ring_buffer_read_start is invoked to get things going | |
| * for real. | |
| * | |
| * This overall must be paired with ring_buffer_read_finish. | |
| */ | |
| struct ring_buffer_iter * | |
| ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| struct ring_buffer_iter *iter; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return NULL; | |
| iter = kmalloc(sizeof(*iter), GFP_KERNEL); | |
| if (!iter) | |
| return NULL; | |
| cpu_buffer = buffer->buffers[cpu]; | |
| iter->cpu_buffer = cpu_buffer; | |
| atomic_inc(&buffer->resize_disabled); | |
| atomic_inc(&cpu_buffer->record_disabled); | |
| return iter; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read_prepare); | |
| /** | |
| * ring_buffer_read_prepare_sync - Synchronize a set of prepare calls | |
| * | |
| * All previously invoked ring_buffer_read_prepare calls to prepare | |
| * iterators will be synchronized. Afterwards, read_buffer_read_start | |
| * calls on those iterators are allowed. | |
| */ | |
| void | |
| ring_buffer_read_prepare_sync(void) | |
| { | |
| synchronize_sched(); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read_prepare_sync); | |
| /** | |
| * ring_buffer_read_start - start a non consuming read of the buffer | |
| * @iter: The iterator returned by ring_buffer_read_prepare | |
| * | |
| * This finalizes the startup of an iteration through the buffer. | |
| * The iterator comes from a call to ring_buffer_read_prepare and | |
| * an intervening ring_buffer_read_prepare_sync must have been | |
| * performed. | |
| * | |
| * Must be paired with ring_buffer_read_finish. | |
| */ | |
| void | |
| ring_buffer_read_start(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long flags; | |
| if (!iter) | |
| return; | |
| cpu_buffer = iter->cpu_buffer; | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| arch_spin_lock(&cpu_buffer->lock); | |
| rb_iter_reset(iter); | |
| arch_spin_unlock(&cpu_buffer->lock); | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read_start); | |
| /** | |
| * ring_buffer_read_finish - finish reading the iterator of the buffer | |
| * @iter: The iterator retrieved by ring_buffer_start | |
| * | |
| * This re-enables the recording to the buffer, and frees the | |
| * iterator. | |
| */ | |
| void | |
| ring_buffer_read_finish(struct ring_buffer_iter *iter) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; | |
| unsigned long flags; | |
| /* | |
| * Ring buffer is disabled from recording, here's a good place | |
| * to check the integrity of the ring buffer. | |
| * Must prevent readers from trying to read, as the check | |
| * clears the HEAD page and readers require it. | |
| */ | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| rb_check_pages(cpu_buffer); | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| atomic_dec(&cpu_buffer->record_disabled); | |
| atomic_dec(&cpu_buffer->buffer->resize_disabled); | |
| kfree(iter); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read_finish); | |
| /** | |
| * ring_buffer_read - read the next item in the ring buffer by the iterator | |
| * @iter: The ring buffer iterator | |
| * @ts: The time stamp of the event read. | |
| * | |
| * This reads the next event in the ring buffer and increments the iterator. | |
| */ | |
| struct ring_buffer_event * | |
| ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts) | |
| { | |
| struct ring_buffer_event *event; | |
| struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| again: | |
| event = rb_iter_peek(iter, ts); | |
| if (!event) | |
| goto out; | |
| if (event->type_len == RINGBUF_TYPE_PADDING) | |
| goto again; | |
| rb_advance_iter(iter); | |
| out: | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| return event; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read); | |
| /** | |
| * ring_buffer_size - return the size of the ring buffer (in bytes) | |
| * @buffer: The ring buffer. | |
| */ | |
| unsigned long ring_buffer_size(struct ring_buffer *buffer, int cpu) | |
| { | |
| /* | |
| * Earlier, this method returned | |
| * BUF_PAGE_SIZE * buffer->nr_pages | |
| * Since the nr_pages field is now removed, we have converted this to | |
| * return the per cpu buffer value. | |
| */ | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 0; | |
| return BUF_PAGE_SIZE * buffer->buffers[cpu]->nr_pages; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_size); | |
| static void | |
| rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer) | |
| { | |
| rb_head_page_deactivate(cpu_buffer); | |
| cpu_buffer->head_page | |
| = list_entry(cpu_buffer->pages, struct buffer_page, list); | |
| local_set(&cpu_buffer->head_page->write, 0); | |
| local_set(&cpu_buffer->head_page->entries, 0); | |
| local_set(&cpu_buffer->head_page->page->commit, 0); | |
| cpu_buffer->head_page->read = 0; | |
| cpu_buffer->tail_page = cpu_buffer->head_page; | |
| cpu_buffer->commit_page = cpu_buffer->head_page; | |
| INIT_LIST_HEAD(&cpu_buffer->reader_page->list); | |
| INIT_LIST_HEAD(&cpu_buffer->new_pages); | |
| local_set(&cpu_buffer->reader_page->write, 0); | |
| local_set(&cpu_buffer->reader_page->entries, 0); | |
| local_set(&cpu_buffer->reader_page->page->commit, 0); | |
| cpu_buffer->reader_page->read = 0; | |
| local_set(&cpu_buffer->entries_bytes, 0); | |
| local_set(&cpu_buffer->overrun, 0); | |
| local_set(&cpu_buffer->commit_overrun, 0); | |
| local_set(&cpu_buffer->dropped_events, 0); | |
| local_set(&cpu_buffer->entries, 0); | |
| local_set(&cpu_buffer->committing, 0); | |
| local_set(&cpu_buffer->commits, 0); | |
| cpu_buffer->read = 0; | |
| cpu_buffer->read_bytes = 0; | |
| cpu_buffer->write_stamp = 0; | |
| cpu_buffer->read_stamp = 0; | |
| cpu_buffer->lost_events = 0; | |
| cpu_buffer->last_overrun = 0; | |
| rb_head_page_activate(cpu_buffer); | |
| } | |
| /** | |
| * ring_buffer_reset_cpu - reset a ring buffer per CPU buffer | |
| * @buffer: The ring buffer to reset a per cpu buffer of | |
| * @cpu: The CPU buffer to be reset | |
| */ | |
| void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; | |
| unsigned long flags; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return; | |
| atomic_inc(&buffer->resize_disabled); | |
| atomic_inc(&cpu_buffer->record_disabled); | |
| /* Make sure all commits have finished */ | |
| synchronize_sched(); | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| if (RB_WARN_ON(cpu_buffer, local_read(&cpu_buffer->committing))) | |
| goto out; | |
| arch_spin_lock(&cpu_buffer->lock); | |
| rb_reset_cpu(cpu_buffer); | |
| arch_spin_unlock(&cpu_buffer->lock); | |
| out: | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| atomic_dec(&cpu_buffer->record_disabled); | |
| atomic_dec(&buffer->resize_disabled); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_reset_cpu); | |
| /** | |
| * ring_buffer_reset - reset a ring buffer | |
| * @buffer: The ring buffer to reset all cpu buffers | |
| */ | |
| void ring_buffer_reset(struct ring_buffer *buffer) | |
| { | |
| int cpu; | |
| for_each_buffer_cpu(buffer, cpu) | |
| ring_buffer_reset_cpu(buffer, cpu); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_reset); | |
| /** | |
| * rind_buffer_empty - is the ring buffer empty? | |
| * @buffer: The ring buffer to test | |
| */ | |
| int ring_buffer_empty(struct ring_buffer *buffer) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long flags; | |
| int dolock; | |
| int cpu; | |
| int ret; | |
| dolock = rb_ok_to_lock(); | |
| /* yes this is racy, but if you don't like the race, lock the buffer */ | |
| for_each_buffer_cpu(buffer, cpu) { | |
| cpu_buffer = buffer->buffers[cpu]; | |
| local_irq_save(flags); | |
| if (dolock) | |
| raw_spin_lock(&cpu_buffer->reader_lock); | |
| ret = rb_per_cpu_empty(cpu_buffer); | |
| if (dolock) | |
| raw_spin_unlock(&cpu_buffer->reader_lock); | |
| local_irq_restore(flags); | |
| if (!ret) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_empty); | |
| /** | |
| * ring_buffer_empty_cpu - is a cpu buffer of a ring buffer empty? | |
| * @buffer: The ring buffer | |
| * @cpu: The CPU buffer to test | |
| */ | |
| int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer; | |
| unsigned long flags; | |
| int dolock; | |
| int ret; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return 1; | |
| dolock = rb_ok_to_lock(); | |
| cpu_buffer = buffer->buffers[cpu]; | |
| local_irq_save(flags); | |
| if (dolock) | |
| raw_spin_lock(&cpu_buffer->reader_lock); | |
| ret = rb_per_cpu_empty(cpu_buffer); | |
| if (dolock) | |
| raw_spin_unlock(&cpu_buffer->reader_lock); | |
| local_irq_restore(flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_empty_cpu); | |
| #ifdef CONFIG_RING_BUFFER_ALLOW_SWAP | |
| /** | |
| * ring_buffer_swap_cpu - swap a CPU buffer between two ring buffers | |
| * @buffer_a: One buffer to swap with | |
| * @buffer_b: The other buffer to swap with | |
| * | |
| * This function is useful for tracers that want to take a "snapshot" | |
| * of a CPU buffer and has another back up buffer lying around. | |
| * it is expected that the tracer handles the cpu buffer not being | |
| * used at the moment. | |
| */ | |
| int ring_buffer_swap_cpu(struct ring_buffer *buffer_a, | |
| struct ring_buffer *buffer_b, int cpu) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer_a; | |
| struct ring_buffer_per_cpu *cpu_buffer_b; | |
| int ret = -EINVAL; | |
| if (!cpumask_test_cpu(cpu, buffer_a->cpumask) || | |
| !cpumask_test_cpu(cpu, buffer_b->cpumask)) | |
| goto out; | |
| cpu_buffer_a = buffer_a->buffers[cpu]; | |
| cpu_buffer_b = buffer_b->buffers[cpu]; | |
| /* At least make sure the two buffers are somewhat the same */ | |
| if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages) | |
| goto out; | |
| ret = -EAGAIN; | |
| if (ring_buffer_flags != RB_BUFFERS_ON) | |
| goto out; | |
| if (atomic_read(&buffer_a->record_disabled)) | |
| goto out; | |
| if (atomic_read(&buffer_b->record_disabled)) | |
| goto out; | |
| if (atomic_read(&cpu_buffer_a->record_disabled)) | |
| goto out; | |
| if (atomic_read(&cpu_buffer_b->record_disabled)) | |
| goto out; | |
| /* | |
| * We can't do a synchronize_sched here because this | |
| * function can be called in atomic context. | |
| * Normally this will be called from the same CPU as cpu. | |
| * If not it's up to the caller to protect this. | |
| */ | |
| atomic_inc(&cpu_buffer_a->record_disabled); | |
| atomic_inc(&cpu_buffer_b->record_disabled); | |
| ret = -EBUSY; | |
| if (local_read(&cpu_buffer_a->committing)) | |
| goto out_dec; | |
| if (local_read(&cpu_buffer_b->committing)) | |
| goto out_dec; | |
| buffer_a->buffers[cpu] = cpu_buffer_b; | |
| buffer_b->buffers[cpu] = cpu_buffer_a; | |
| cpu_buffer_b->buffer = buffer_a; | |
| cpu_buffer_a->buffer = buffer_b; | |
| ret = 0; | |
| out_dec: | |
| atomic_dec(&cpu_buffer_a->record_disabled); | |
| atomic_dec(&cpu_buffer_b->record_disabled); | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu); | |
| #endif /* CONFIG_RING_BUFFER_ALLOW_SWAP */ | |
| /** | |
| * ring_buffer_alloc_read_page - allocate a page to read from buffer | |
| * @buffer: the buffer to allocate for. | |
| * @cpu: the cpu buffer to allocate. | |
| * | |
| * This function is used in conjunction with ring_buffer_read_page. | |
| * When reading a full page from the ring buffer, these functions | |
| * can be used to speed up the process. The calling function should | |
| * allocate a few pages first with this function. Then when it | |
| * needs to get pages from the ring buffer, it passes the result | |
| * of this function into ring_buffer_read_page, which will swap | |
| * the page that was allocated, with the read page of the buffer. | |
| * | |
| * Returns: | |
| * The page allocated, or NULL on error. | |
| */ | |
| void *ring_buffer_alloc_read_page(struct ring_buffer *buffer, int cpu) | |
| { | |
| struct buffer_data_page *bpage; | |
| struct page *page; | |
| page = alloc_pages_node(cpu_to_node(cpu), | |
| GFP_KERNEL | __GFP_NORETRY, 0); | |
| if (!page) | |
| return NULL; | |
| bpage = page_address(page); | |
| rb_init_page(bpage); | |
| return bpage; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_alloc_read_page); | |
| /** | |
| * ring_buffer_free_read_page - free an allocated read page | |
| * @buffer: the buffer the page was allocate for | |
| * @data: the page to free | |
| * | |
| * Free a page allocated from ring_buffer_alloc_read_page. | |
| */ | |
| void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data) | |
| { | |
| free_page((unsigned long)data); | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_free_read_page); | |
| /** | |
| * ring_buffer_read_page - extract a page from the ring buffer | |
| * @buffer: buffer to extract from | |
| * @data_page: the page to use allocated from ring_buffer_alloc_read_page | |
| * @len: amount to extract | |
| * @cpu: the cpu of the buffer to extract | |
| * @full: should the extraction only happen when the page is full. | |
| * | |
| * This function will pull out a page from the ring buffer and consume it. | |
| * @data_page must be the address of the variable that was returned | |
| * from ring_buffer_alloc_read_page. This is because the page might be used | |
| * to swap with a page in the ring buffer. | |
| * | |
| * for example: | |
| * rpage = ring_buffer_alloc_read_page(buffer, cpu); | |
| * if (!rpage) | |
| * return error; | |
| * ret = ring_buffer_read_page(buffer, &rpage, len, cpu, 0); | |
| * if (ret >= 0) | |
| * process_page(rpage, ret); | |
| * | |
| * When @full is set, the function will not return true unless | |
| * the writer is off the reader page. | |
| * | |
| * Note: it is up to the calling functions to handle sleeps and wakeups. | |
| * The ring buffer can be used anywhere in the kernel and can not | |
| * blindly call wake_up. The layer that uses the ring buffer must be | |
| * responsible for that. | |
| * | |
| * Returns: | |
| * >=0 if data has been transferred, returns the offset of consumed data. | |
| * <0 if no data has been transferred. | |
| */ | |
| int ring_buffer_read_page(struct ring_buffer *buffer, | |
| void **data_page, size_t len, int cpu, int full) | |
| { | |
| struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu]; | |
| struct ring_buffer_event *event; | |
| struct buffer_data_page *bpage; | |
| struct buffer_page *reader; | |
| unsigned long missed_events; | |
| unsigned long flags; | |
| unsigned int commit; | |
| unsigned int read; | |
| u64 save_timestamp; | |
| int ret = -1; | |
| if (!cpumask_test_cpu(cpu, buffer->cpumask)) | |
| goto out; | |
| /* | |
| * If len is not big enough to hold the page header, then | |
| * we can not copy anything. | |
| */ | |
| if (len <= BUF_PAGE_HDR_SIZE) | |
| goto out; | |
| len -= BUF_PAGE_HDR_SIZE; | |
| if (!data_page) | |
| goto out; | |
| bpage = *data_page; | |
| if (!bpage) | |
| goto out; | |
| raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); | |
| reader = rb_get_reader_page(cpu_buffer); | |
| if (!reader) | |
| goto out_unlock; | |
| event = rb_reader_event(cpu_buffer); | |
| read = reader->read; | |
| commit = rb_page_commit(reader); | |
| /* Check if any events were dropped */ | |
| missed_events = cpu_buffer->lost_events; | |
| /* | |
| * If this page has been partially read or | |
| * if len is not big enough to read the rest of the page or | |
| * a writer is still on the page, then | |
| * we must copy the data from the page to the buffer. | |
| * Otherwise, we can simply swap the page with the one passed in. | |
| */ | |
| if (read || (len < (commit - read)) || | |
| cpu_buffer->reader_page == cpu_buffer->commit_page) { | |
| struct buffer_data_page *rpage = cpu_buffer->reader_page->page; | |
| unsigned int rpos = read; | |
| unsigned int pos = 0; | |
| unsigned int size; | |
| if (full) | |
| goto out_unlock; | |
| if (len > (commit - read)) | |
| len = (commit - read); | |
| /* Always keep the time extend and data together */ | |
| size = rb_event_ts_length(event); | |
| if (len < size) | |
| goto out_unlock; | |
| /* save the current timestamp, since the user will need it */ | |
| save_timestamp = cpu_buffer->read_stamp; | |
| /* Need to copy one event at a time */ | |
| do { | |
| /* We need the size of one event, because | |
| * rb_advance_reader only advances by one event, | |
| * whereas rb_event_ts_length may include the size of | |
| * one or two events. | |
| * We have already ensured there's enough space if this | |
| * is a time extend. */ | |
| size = rb_event_length(event); | |
| memcpy(bpage->data + pos, rpage->data + rpos, size); | |
| len -= size; | |
| rb_advance_reader(cpu_buffer); | |
| rpos = reader->read; | |
| pos += size; | |
| if (rpos >= commit) | |
| break; | |
| event = rb_reader_event(cpu_buffer); | |
| /* Always keep the time extend and data together */ | |
| size = rb_event_ts_length(event); | |
| } while (len >= size); | |
| /* update bpage */ | |
| local_set(&bpage->commit, pos); | |
| bpage->time_stamp = save_timestamp; | |
| /* we copied everything to the beginning */ | |
| read = 0; | |
| } else { | |
| /* update the entry counter */ | |
| cpu_buffer->read += rb_page_entries(reader); | |
| cpu_buffer->read_bytes += BUF_PAGE_SIZE; | |
| /* swap the pages */ | |
| rb_init_page(bpage); | |
| bpage = reader->page; | |
| reader->page = *data_page; | |
| local_set(&reader->write, 0); | |
| local_set(&reader->entries, 0); | |
| reader->read = 0; | |
| *data_page = bpage; | |
| /* | |
| * Use the real_end for the data size, | |
| * This gives us a chance to store the lost events | |
| * on the page. | |
| */ | |
| if (reader->real_end) | |
| local_set(&bpage->commit, reader->real_end); | |
| } | |
| ret = read; | |
| cpu_buffer->lost_events = 0; | |
| commit = local_read(&bpage->commit); | |
| /* | |
| * Set a flag in the commit field if we lost events | |
| */ | |
| if (missed_events) { | |
| /* If there is room at the end of the page to save the | |
| * missed events, then record it there. | |
| */ | |
| if (BUF_PAGE_SIZE - commit >= sizeof(missed_events)) { | |
| memcpy(&bpage->data[commit], &missed_events, | |
| sizeof(missed_events)); | |
| local_add(RB_MISSED_STORED, &bpage->commit); | |
| commit += sizeof(missed_events); | |
| } | |
| local_add(RB_MISSED_EVENTS, &bpage->commit); | |
| } | |
| /* | |
| * This page may be off to user land. Zero it out here. | |
| */ | |
| if (commit < BUF_PAGE_SIZE) | |
| memset(&bpage->data[commit], 0, BUF_PAGE_SIZE - commit); | |
| out_unlock: | |
| raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ring_buffer_read_page); | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| static int rb_cpu_notify(struct notifier_block *self, | |
| unsigned long action, void *hcpu) | |
| { | |
| struct ring_buffer *buffer = | |
| container_of(self, struct ring_buffer, cpu_notify); | |
| long cpu = (long)hcpu; | |
| int cpu_i, nr_pages_same; | |
| unsigned int nr_pages; | |
| switch (action) { | |
| case CPU_UP_PREPARE: | |
| case CPU_UP_PREPARE_FROZEN: | |
| if (cpumask_test_cpu(cpu, buffer->cpumask)) | |
| return NOTIFY_OK; | |
| nr_pages = 0; | |
| nr_pages_same = 1; | |
| /* check if all cpu sizes are same */ | |
| for_each_buffer_cpu(buffer, cpu_i) { | |
| /* fill in the size from first enabled cpu */ | |
| if (nr_pages == 0) | |
| nr_pages = buffer->buffers[cpu_i]->nr_pages; | |
| if (nr_pages != buffer->buffers[cpu_i]->nr_pages) { | |
| nr_pages_same = 0; | |
| break; | |
| } | |
| } | |
| /* allocate minimum pages, user can later expand it */ | |
| if (!nr_pages_same) | |
| nr_pages = 2; | |
| buffer->buffers[cpu] = | |
| rb_allocate_cpu_buffer(buffer, nr_pages, cpu); | |
| if (!buffer->buffers[cpu]) { | |
| WARN(1, "failed to allocate ring buffer on CPU %ld\n", | |
| cpu); | |
| return NOTIFY_OK; | |
| } | |
| smp_wmb(); | |
| cpumask_set_cpu(cpu, buffer->cpumask); | |
| break; | |
| case CPU_DOWN_PREPARE: | |
| case CPU_DOWN_PREPARE_FROZEN: | |
| /* | |
| * Do nothing. | |
| * If we were to free the buffer, then the user would | |
| * lose any trace that was in the buffer. | |
| */ | |
| break; | |
| default: | |
| break; | |
| } | |
| return NOTIFY_OK; | |
| } | |
| #endif | |
| #ifdef CONFIG_RING_BUFFER_STARTUP_TEST | |
| /* | |
| * This is a basic integrity check of the ring buffer. | |
| * Late in the boot cycle this test will run when configured in. | |
| * It will kick off a thread per CPU that will go into a loop | |
| * writing to the per cpu ring buffer various sizes of data. | |
| * Some of the data will be large items, some small. | |
| * | |
| * Another thread is created that goes into a spin, sending out | |
| * IPIs to the other CPUs to also write into the ring buffer. | |
| * this is to test the nesting ability of the buffer. | |
| * | |
| * Basic stats are recorded and reported. If something in the | |
| * ring buffer should happen that's not expected, a big warning | |
| * is displayed and all ring buffers are disabled. | |
| */ | |
| static struct task_struct *rb_threads[NR_CPUS] __initdata; | |
| struct rb_test_data { | |
| struct ring_buffer *buffer; | |
| unsigned long events; | |
| unsigned long bytes_written; | |
| unsigned long bytes_alloc; | |
| unsigned long bytes_dropped; | |
| unsigned long events_nested; | |
| unsigned long bytes_written_nested; | |
| unsigned long bytes_alloc_nested; | |
| unsigned long bytes_dropped_nested; | |
| int min_size_nested; | |
| int max_size_nested; | |
| int max_size; | |
| int min_size; | |
| int cpu; | |
| int cnt; | |
| }; | |
| static struct rb_test_data rb_data[NR_CPUS] __initdata; | |
| /* 1 meg per cpu */ | |
| #define RB_TEST_BUFFER_SIZE 1048576 | |
| static char rb_string[] __initdata = | |
| "abcdefghijklmnopqrstuvwxyz1234567890!@#$%^&*()?+\\" | |
| "?+|:';\",.<>/?abcdefghijklmnopqrstuvwxyz1234567890" | |
| "!@#$%^&*()?+\\?+|:';\",.<>/?abcdefghijklmnopqrstuv"; | |
| static bool rb_test_started __initdata; | |
| struct rb_item { | |
| int size; | |
| char str[]; | |
| }; | |
| static __init int rb_write_something(struct rb_test_data *data, bool nested) | |
| { | |
| struct ring_buffer_event *event; | |
| struct rb_item *item; | |
| bool started; | |
| int event_len; | |
| int size; | |
| int len; | |
| int cnt; | |
| /* Have nested writes different that what is written */ | |
| cnt = data->cnt + (nested ? 27 : 0); | |
| /* Multiply cnt by ~e, to make some unique increment */ | |
| size = (data->cnt * 68 / 25) % (sizeof(rb_string) - 1); | |
| len = size + sizeof(struct rb_item); | |
| started = rb_test_started; | |
| /* read rb_test_started before checking buffer enabled */ | |
| smp_rmb(); | |
| event = ring_buffer_lock_reserve(data->buffer, len); | |
| if (!event) { | |
| /* Ignore dropped events before test starts. */ | |
| if (started) { | |
| if (nested) | |
| data->bytes_dropped += len; | |
| else | |
| data->bytes_dropped_nested += len; | |
| } | |
| return len; | |
| } | |
| event_len = ring_buffer_event_length(event); | |
| if (RB_WARN_ON(data->buffer, event_len < len)) | |
| goto out; | |
| item = ring_buffer_event_data(event); | |
| item->size = size; | |
| memcpy(item->str, rb_string, size); | |
| if (nested) { | |
| data->bytes_alloc_nested += event_len; | |
| data->bytes_written_nested += len; | |
| data->events_nested++; | |
| if (!data->min_size_nested || len < data->min_size_nested) | |
| data->min_size_nested = len; | |
| if (len > data->max_size_nested) | |
| data->max_size_nested = len; | |
| } else { | |
| data->bytes_alloc += event_len; | |
| data->bytes_written += len; | |
| data->events++; | |
| if (!data->min_size || len < data->min_size) | |
| data->max_size = len; | |
| if (len > data->max_size) | |
| data->max_size = len; | |
| } | |
| out: | |
| ring_buffer_unlock_commit(data->buffer, event); | |
| return 0; | |
| } | |
| static __init int rb_test(void *arg) | |
| { | |
| struct rb_test_data *data = arg; | |
| while (!kthread_should_stop()) { | |
| rb_write_something(data, false); | |
| data->cnt++; | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| /* Now sleep between a min of 100-300us and a max of 1ms */ | |
| usleep_range(((data->cnt % 3) + 1) * 100, 1000); | |
| } | |
| return 0; | |
| } | |
| static __init void rb_ipi(void *ignore) | |
| { | |
| struct rb_test_data *data; | |
| int cpu = smp_processor_id(); | |
| data = &rb_data[cpu]; | |
| rb_write_something(data, true); | |
| } | |
| static __init int rb_hammer_test(void *arg) | |
| { | |
| while (!kthread_should_stop()) { | |
| /* Send an IPI to all cpus to write data! */ | |
| smp_call_function(rb_ipi, NULL, 1); | |
| /* No sleep, but for non preempt, let others run */ | |
| schedule(); | |
| } | |
| return 0; | |
| } | |
| static __init int test_ringbuffer(void) | |
| { | |
| struct task_struct *rb_hammer; | |
| struct ring_buffer *buffer; | |
| int cpu; | |
| int ret = 0; | |
| pr_info("Running ring buffer tests...\n"); | |
| buffer = ring_buffer_alloc(RB_TEST_BUFFER_SIZE, RB_FL_OVERWRITE); | |
| if (WARN_ON(!buffer)) | |
| return 0; | |
| /* Disable buffer so that threads can't write to it yet */ | |
| ring_buffer_record_off(buffer); | |
| for_each_online_cpu(cpu) { | |
| rb_data[cpu].buffer = buffer; | |
| rb_data[cpu].cpu = cpu; | |
| rb_data[cpu].cnt = cpu; | |
| rb_threads[cpu] = kthread_create(rb_test, &rb_data[cpu], | |
| "rbtester/%d", cpu); | |
| if (WARN_ON(!rb_threads[cpu])) { | |
| pr_cont("FAILED\n"); | |
| ret = -1; | |
| goto out_free; | |
| } | |
| kthread_bind(rb_threads[cpu], cpu); | |
| wake_up_process(rb_threads[cpu]); | |
| } | |
| /* Now create the rb hammer! */ | |
| rb_hammer = kthread_run(rb_hammer_test, NULL, "rbhammer"); | |
| if (WARN_ON(!rb_hammer)) { | |
| pr_cont("FAILED\n"); | |
| ret = -1; | |
| goto out_free; | |
| } | |
| ring_buffer_record_on(buffer); | |
| /* | |
| * Show buffer is enabled before setting rb_test_started. | |
| * Yes there's a small race window where events could be | |
| * dropped and the thread wont catch it. But when a ring | |
| * buffer gets enabled, there will always be some kind of | |
| * delay before other CPUs see it. Thus, we don't care about | |
| * those dropped events. We care about events dropped after | |
| * the threads see that the buffer is active. | |
| */ | |
| smp_wmb(); | |
| rb_test_started = true; | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| /* Just run for 10 seconds */; | |
| schedule_timeout(10 * HZ); | |
| kthread_stop(rb_hammer); | |
| out_free: | |
| for_each_online_cpu(cpu) { | |
| if (!rb_threads[cpu]) | |
| break; | |
| kthread_stop(rb_threads[cpu]); | |
| } | |
| if (ret) { | |
| ring_buffer_free(buffer); | |
| return ret; | |
| } | |
| /* Report! */ | |
| pr_info("finished\n"); | |
| for_each_online_cpu(cpu) { | |
| struct ring_buffer_event *event; | |
| struct rb_test_data *data = &rb_data[cpu]; | |
| struct rb_item *item; | |
| unsigned long total_events; | |
| unsigned long total_dropped; | |
| unsigned long total_written; | |
| unsigned long total_alloc; | |
| unsigned long total_read = 0; | |
| unsigned long total_size = 0; | |
| unsigned long total_len = 0; | |
| unsigned long total_lost = 0; | |
| unsigned long lost; | |
| int big_event_size; | |
| int small_event_size; | |
| ret = -1; | |
| total_events = data->events + data->events_nested; | |
| total_written = data->bytes_written + data->bytes_written_nested; | |
| total_alloc = data->bytes_alloc + data->bytes_alloc_nested; | |
| total_dropped = data->bytes_dropped + data->bytes_dropped_nested; | |
| big_event_size = data->max_size + data->max_size_nested; | |
| small_event_size = data->min_size + data->min_size_nested; | |
| pr_info("CPU %d:\n", cpu); | |
| pr_info(" events: %ld\n", total_events); | |
| pr_info(" dropped bytes: %ld\n", total_dropped); | |
| pr_info(" alloced bytes: %ld\n", total_alloc); | |
| pr_info(" written bytes: %ld\n", total_written); | |
| pr_info(" biggest event: %d\n", big_event_size); | |
| pr_info(" smallest event: %d\n", small_event_size); | |
| if (RB_WARN_ON(buffer, total_dropped)) | |
| break; | |
| ret = 0; | |
| while ((event = ring_buffer_consume(buffer, cpu, NULL, &lost))) { | |
| total_lost += lost; | |
| item = ring_buffer_event_data(event); | |
| total_len += ring_buffer_event_length(event); | |
| total_size += item->size + sizeof(struct rb_item); | |
| if (memcmp(&item->str[0], rb_string, item->size) != 0) { | |
| pr_info("FAILED!\n"); | |
| pr_info("buffer had: %.*s\n", item->size, item->str); | |
| pr_info("expected: %.*s\n", item->size, rb_string); | |
| RB_WARN_ON(buffer, 1); | |
| ret = -1; | |
| break; | |
| } | |
| total_read++; | |
| } | |
| if (ret) | |
| break; | |
| ret = -1; | |
| pr_info(" read events: %ld\n", total_read); | |
| pr_info(" lost events: %ld\n", total_lost); | |
| pr_info(" total events: %ld\n", total_lost + total_read); | |
| pr_info(" recorded len bytes: %ld\n", total_len); | |
| pr_info(" recorded size bytes: %ld\n", total_size); | |
| if (total_lost) | |
| pr_info(" With dropped events, record len and size may not match\n" | |
| " alloced and written from above\n"); | |
| if (!total_lost) { | |
| if (RB_WARN_ON(buffer, total_len != total_alloc || | |
| total_size != total_written)) | |
| break; | |
| } | |
| if (RB_WARN_ON(buffer, total_lost + total_read != total_events)) | |
| break; | |
| ret = 0; | |
| } | |
| if (!ret) | |
| pr_info("Ring buffer PASSED!\n"); | |
| ring_buffer_free(buffer); | |
| return 0; | |
| } | |
| late_initcall(test_ringbuffer); | |
| #endif /* CONFIG_RING_BUFFER_STARTUP_TEST */ |