| /* | 
 |  * Frame Buffer Driver for PKUnity-v3 Unigfx | 
 |  * Code specific to PKUnity SoC and UniCore ISA | 
 |  * | 
 |  *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> | 
 |  *	Copyright (C) 2001-2010 Guan Xuetao | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/fb.h> | 
 | #include <linux/init.h> | 
 | #include <linux/console.h> | 
 |  | 
 | #include <asm/sizes.h> | 
 | #include <mach/hardware.h> | 
 |  | 
 | /* Platform_data reserved for unifb registers. */ | 
 | #define UNIFB_REGS_NUM		10 | 
 | /* RAM reserved for the frame buffer. */ | 
 | #define UNIFB_MEMSIZE		(SZ_4M)		/* 4 MB for 1024*768*32b */ | 
 |  | 
 | /* | 
 |  * cause UNIGFX don not have EDID | 
 |  * all the modes are organized as follow | 
 |  */ | 
 | static const struct fb_videomode unifb_modes[] = { | 
 | 	/* 0 640x480-60 VESA */ | 
 | 	{ "640x480@60",  60,  640, 480,  25175000,  48, 16, 34, 10,  96, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 1 640x480-75 VESA */ | 
 | 	{ "640x480@75",  75,  640, 480,  31500000, 120, 16, 18,  1,  64, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 2 800x600-60 VESA */ | 
 | 	{ "800x600@60",  60,  800, 600,  40000000,  88, 40, 26,  1, 128, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 3 800x600-75 VESA */ | 
 | 	{ "800x600@75",  75,  800, 600,  49500000, 160, 16, 23,  1,  80, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 4 1024x768-60 VESA */ | 
 | 	{ "1024x768@60", 60, 1024, 768,  65000000, 160, 24, 34,  3, 136, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 5 1024x768-75 VESA */ | 
 | 	{ "1024x768@75", 75, 1024, 768,  78750000, 176, 16, 30,  1,  96, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 6 1280x960-60 VESA */ | 
 | 	{ "1280x960@60", 60, 1280, 960, 108000000, 312, 96, 38,  1, 112, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 7 1440x900-60 VESA */ | 
 | 	{ "1440x900@60", 60, 1440, 900, 106500000, 232, 80, 30,  3, 152, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 8 FIXME 9 1024x600-60 VESA UNTESTED */ | 
 | 	{ "1024x600@60", 60, 1024, 600,  50650000, 160, 24, 26,  1, 136, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 9 FIXME 10 1024x600-75 VESA UNTESTED */ | 
 | 	{ "1024x600@75", 75, 1024, 600,  61500000, 176, 16, 23,  1,  96, 1, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | 	/* 10 FIXME 11 1366x768-60 VESA UNTESTED */ | 
 | 	{ "1366x768@60", 60, 1366, 768,  85500000, 256, 58, 18,  1,  112, 3, | 
 | 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, | 
 | }; | 
 |  | 
 | static struct fb_var_screeninfo unifb_default = { | 
 | 	.xres =		640, | 
 | 	.yres =		480, | 
 | 	.xres_virtual =	640, | 
 | 	.yres_virtual =	480, | 
 | 	.bits_per_pixel = 16, | 
 | 	.red =		{ 11, 5, 0 }, | 
 | 	.green =	{ 5,  6, 0 }, | 
 | 	.blue =		{ 0,  5, 0 }, | 
 | 	.activate =	FB_ACTIVATE_NOW, | 
 | 	.height =	-1, | 
 | 	.width =	-1, | 
 | 	.pixclock =	25175000, | 
 | 	.left_margin =	48, | 
 | 	.right_margin =	16, | 
 | 	.upper_margin =	33, | 
 | 	.lower_margin =	10, | 
 | 	.hsync_len =	96, | 
 | 	.vsync_len =	2, | 
 | 	.vmode =	FB_VMODE_NONINTERLACED, | 
 | }; | 
 |  | 
 | static struct fb_fix_screeninfo unifb_fix = { | 
 | 	.id =		"UNIGFX FB", | 
 | 	.type =		FB_TYPE_PACKED_PIXELS, | 
 | 	.visual =	FB_VISUAL_TRUECOLOR, | 
 | 	.xpanstep =	1, | 
 | 	.ypanstep =	1, | 
 | 	.ywrapstep =	1, | 
 | 	.accel =	FB_ACCEL_NONE, | 
 | }; | 
 |  | 
 | static void unifb_sync(struct fb_info *info) | 
 | { | 
 | 	/* TODO: may, this can be replaced by interrupt */ | 
 | 	int cnt; | 
 |  | 
 | 	for (cnt = 0; cnt < 0x10000000; cnt++) { | 
 | 		if (readl(UGE_COMMAND) & 0x1000000) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	if (cnt > 0x8000000) | 
 | 		dev_warn(info->device, "Warning: UniGFX GE time out ...\n"); | 
 | } | 
 |  | 
 | static void unifb_prim_fillrect(struct fb_info *info, | 
 | 				const struct fb_fillrect *region) | 
 | { | 
 | 	int awidth = region->width; | 
 | 	int aheight = region->height; | 
 | 	int m_iBpp = info->var.bits_per_pixel; | 
 | 	int screen_width = info->var.xres; | 
 | 	int src_sel = 1;	/* from fg_color */ | 
 | 	int pat_sel = 1; | 
 | 	int src_x0 = 0; | 
 | 	int dst_x0 = region->dx; | 
 | 	int src_y0 = 0; | 
 | 	int dst_y0 = region->dy; | 
 | 	int rop_alpha_sel = 0; | 
 | 	int rop_alpha_code = 0xCC; | 
 | 	int x_dir = 1; | 
 | 	int y_dir = 1; | 
 | 	int alpha_r = 0; | 
 | 	int alpha_sel = 0; | 
 | 	int dst_pitch = screen_width * (m_iBpp / 8); | 
 | 	int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8); | 
 | 	int src_pitch = screen_width * (m_iBpp / 8); | 
 | 	int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8); | 
 | 	unsigned int command = 0; | 
 | 	int clip_region = 0; | 
 | 	int clip_en = 0; | 
 | 	int tp_en = 0; | 
 | 	int fg_color = 0; | 
 | 	int bottom = info->var.yres - 1; | 
 | 	int right = info->var.xres - 1; | 
 | 	int top = 0; | 
 |  | 
 | 	bottom = (bottom << 16) | right; | 
 | 	command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16) | 
 | 		| (x_dir << 20) | (y_dir << 21) | (command << 24) | 
 | 		| (clip_region << 23) | (clip_en << 22) | (tp_en << 27); | 
 | 	src_pitch = (dst_pitch << 16) | src_pitch; | 
 | 	awidth = awidth | (aheight << 16); | 
 | 	alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff) | 
 | 		| (alpha_sel << 16); | 
 | 	src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16); | 
 | 	dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16); | 
 | 	fg_color = region->color; | 
 |  | 
 | 	unifb_sync(info); | 
 |  | 
 | 	writel(((u32 *)(info->pseudo_palette))[fg_color], UGE_FCOLOR); | 
 | 	writel(0, UGE_BCOLOR); | 
 | 	writel(src_pitch, UGE_PITCH); | 
 | 	writel(src_offset, UGE_SRCSTART); | 
 | 	writel(dst_offset, UGE_DSTSTART); | 
 | 	writel(awidth, UGE_WIDHEIGHT); | 
 | 	writel(top, UGE_CLIP0); | 
 | 	writel(bottom, UGE_CLIP1); | 
 | 	writel(alpha_r, UGE_ROPALPHA); | 
 | 	writel(src_x0, UGE_SRCXY); | 
 | 	writel(dst_x0, UGE_DSTXY); | 
 | 	writel(command, UGE_COMMAND); | 
 | } | 
 |  | 
 | static void unifb_fillrect(struct fb_info *info, | 
 | 		const struct fb_fillrect *region) | 
 | { | 
 | 	struct fb_fillrect modded; | 
 | 	int vxres, vyres; | 
 |  | 
 | 	if (info->flags & FBINFO_HWACCEL_DISABLED) { | 
 | 		sys_fillrect(info, region); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	vxres = info->var.xres_virtual; | 
 | 	vyres = info->var.yres_virtual; | 
 |  | 
 | 	memcpy(&modded, region, sizeof(struct fb_fillrect)); | 
 |  | 
 | 	if (!modded.width || !modded.height || | 
 | 	    modded.dx >= vxres || modded.dy >= vyres) | 
 | 		return; | 
 |  | 
 | 	if (modded.dx + modded.width > vxres) | 
 | 		modded.width = vxres - modded.dx; | 
 | 	if (modded.dy + modded.height > vyres) | 
 | 		modded.height = vyres - modded.dy; | 
 |  | 
 | 	unifb_prim_fillrect(info, &modded); | 
 | } | 
 |  | 
 | static void unifb_prim_copyarea(struct fb_info *info, | 
 | 				const struct fb_copyarea *area) | 
 | { | 
 | 	int awidth = area->width; | 
 | 	int aheight = area->height; | 
 | 	int m_iBpp = info->var.bits_per_pixel; | 
 | 	int screen_width = info->var.xres; | 
 | 	int src_sel = 2;	/* from mem */ | 
 | 	int pat_sel = 0; | 
 | 	int src_x0 = area->sx; | 
 | 	int dst_x0 = area->dx; | 
 | 	int src_y0 = area->sy; | 
 | 	int dst_y0 = area->dy; | 
 |  | 
 | 	int rop_alpha_sel = 0; | 
 | 	int rop_alpha_code = 0xCC; | 
 | 	int x_dir = 1; | 
 | 	int y_dir = 1; | 
 |  | 
 | 	int alpha_r = 0; | 
 | 	int alpha_sel = 0; | 
 | 	int dst_pitch = screen_width * (m_iBpp / 8); | 
 | 	int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8); | 
 | 	int src_pitch = screen_width * (m_iBpp / 8); | 
 | 	int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8); | 
 | 	unsigned int command = 0; | 
 | 	int clip_region = 0; | 
 | 	int clip_en = 1; | 
 | 	int tp_en = 0; | 
 | 	int top = 0; | 
 | 	int bottom = info->var.yres; | 
 | 	int right = info->var.xres; | 
 | 	int fg_color = 0; | 
 | 	int bg_color = 0; | 
 |  | 
 | 	if (src_x0 < 0) | 
 | 		src_x0 = 0; | 
 | 	if (src_y0 < 0) | 
 | 		src_y0 = 0; | 
 |  | 
 | 	if (src_y0 - dst_y0 > 0) { | 
 | 		y_dir = 1; | 
 | 	} else { | 
 | 		y_dir = 0; | 
 | 		src_offset = (src_y0 + aheight) * src_pitch + | 
 | 				src_x0 * (m_iBpp / 8); | 
 | 		dst_offset = (dst_y0 + aheight) * dst_pitch + | 
 | 				dst_x0 * (m_iBpp / 8); | 
 | 		src_y0 += aheight; | 
 | 		dst_y0 += aheight; | 
 | 	} | 
 |  | 
 | 	command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16) | | 
 | 		(x_dir << 20) | (y_dir << 21) | (command << 24) | | 
 | 		(clip_region << 23) | (clip_en << 22) | (tp_en << 27); | 
 | 	src_pitch = (dst_pitch << 16) | src_pitch; | 
 | 	awidth = awidth | (aheight << 16); | 
 | 	alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff) | | 
 | 		(alpha_sel << 16); | 
 | 	src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16); | 
 | 	dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16); | 
 | 	bottom = (bottom << 16) | right; | 
 |  | 
 | 	unifb_sync(info); | 
 |  | 
 | 	writel(src_pitch, UGE_PITCH); | 
 | 	writel(src_offset, UGE_SRCSTART); | 
 | 	writel(dst_offset, UGE_DSTSTART); | 
 | 	writel(awidth, UGE_WIDHEIGHT); | 
 | 	writel(top, UGE_CLIP0); | 
 | 	writel(bottom, UGE_CLIP1); | 
 | 	writel(bg_color, UGE_BCOLOR); | 
 | 	writel(fg_color, UGE_FCOLOR); | 
 | 	writel(alpha_r, UGE_ROPALPHA); | 
 | 	writel(src_x0, UGE_SRCXY); | 
 | 	writel(dst_x0, UGE_DSTXY); | 
 | 	writel(command, UGE_COMMAND); | 
 | } | 
 |  | 
 | static void unifb_copyarea(struct fb_info *info, const struct fb_copyarea *area) | 
 | { | 
 | 	struct fb_copyarea modded; | 
 | 	u32 vxres, vyres; | 
 | 	modded.sx = area->sx; | 
 | 	modded.sy = area->sy; | 
 | 	modded.dx = area->dx; | 
 | 	modded.dy = area->dy; | 
 | 	modded.width = area->width; | 
 | 	modded.height = area->height; | 
 |  | 
 | 	if (info->flags & FBINFO_HWACCEL_DISABLED) { | 
 | 		sys_copyarea(info, area); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	vxres = info->var.xres_virtual; | 
 | 	vyres = info->var.yres_virtual; | 
 |  | 
 | 	if (!modded.width || !modded.height || | 
 | 	    modded.sx >= vxres || modded.sy >= vyres || | 
 | 	    modded.dx >= vxres || modded.dy >= vyres) | 
 | 		return; | 
 |  | 
 | 	if (modded.sx + modded.width > vxres) | 
 | 		modded.width = vxres - modded.sx; | 
 | 	if (modded.dx + modded.width > vxres) | 
 | 		modded.width = vxres - modded.dx; | 
 | 	if (modded.sy + modded.height > vyres) | 
 | 		modded.height = vyres - modded.sy; | 
 | 	if (modded.dy + modded.height > vyres) | 
 | 		modded.height = vyres - modded.dy; | 
 |  | 
 | 	unifb_prim_copyarea(info, &modded); | 
 | } | 
 |  | 
 | static void unifb_imageblit(struct fb_info *info, const struct fb_image *image) | 
 | { | 
 | 	sys_imageblit(info, image); | 
 | } | 
 |  | 
 | static u_long get_line_length(int xres_virtual, int bpp) | 
 | { | 
 | 	u_long length; | 
 |  | 
 | 	length = xres_virtual * bpp; | 
 | 	length = (length + 31) & ~31; | 
 | 	length >>= 3; | 
 | 	return length; | 
 | } | 
 |  | 
 | /* | 
 |  *  Setting the video mode has been split into two parts. | 
 |  *  First part, xxxfb_check_var, must not write anything | 
 |  *  to hardware, it should only verify and adjust var. | 
 |  *  This means it doesn't alter par but it does use hardware | 
 |  *  data from it to check this var. | 
 |  */ | 
 | static int unifb_check_var(struct fb_var_screeninfo *var, | 
 | 			 struct fb_info *info) | 
 | { | 
 | 	u_long line_length; | 
 |  | 
 | 	/* | 
 | 	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal! | 
 | 	 *  as FB_VMODE_SMOOTH_XPAN is only used internally | 
 | 	 */ | 
 |  | 
 | 	if (var->vmode & FB_VMODE_CONUPDATE) { | 
 | 		var->vmode |= FB_VMODE_YWRAP; | 
 | 		var->xoffset = info->var.xoffset; | 
 | 		var->yoffset = info->var.yoffset; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 *  Some very basic checks | 
 | 	 */ | 
 | 	if (!var->xres) | 
 | 		var->xres = 1; | 
 | 	if (!var->yres) | 
 | 		var->yres = 1; | 
 | 	if (var->xres > var->xres_virtual) | 
 | 		var->xres_virtual = var->xres; | 
 | 	if (var->yres > var->yres_virtual) | 
 | 		var->yres_virtual = var->yres; | 
 | 	if (var->bits_per_pixel <= 1) | 
 | 		var->bits_per_pixel = 1; | 
 | 	else if (var->bits_per_pixel <= 8) | 
 | 		var->bits_per_pixel = 8; | 
 | 	else if (var->bits_per_pixel <= 16) | 
 | 		var->bits_per_pixel = 16; | 
 | 	else if (var->bits_per_pixel <= 24) | 
 | 		var->bits_per_pixel = 24; | 
 | 	else if (var->bits_per_pixel <= 32) | 
 | 		var->bits_per_pixel = 32; | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (var->xres_virtual < var->xoffset + var->xres) | 
 | 		var->xres_virtual = var->xoffset + var->xres; | 
 | 	if (var->yres_virtual < var->yoffset + var->yres) | 
 | 		var->yres_virtual = var->yoffset + var->yres; | 
 |  | 
 | 	/* | 
 | 	 *  Memory limit | 
 | 	 */ | 
 | 	line_length = | 
 | 	    get_line_length(var->xres_virtual, var->bits_per_pixel); | 
 | 	if (line_length * var->yres_virtual > UNIFB_MEMSIZE) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * Now that we checked it we alter var. The reason being is that the | 
 | 	 * video mode passed in might not work but slight changes to it might | 
 | 	 * make it work. This way we let the user know what is acceptable. | 
 | 	 */ | 
 | 	switch (var->bits_per_pixel) { | 
 | 	case 1: | 
 | 	case 8: | 
 | 		var->red.offset = 0; | 
 | 		var->red.length = 8; | 
 | 		var->green.offset = 0; | 
 | 		var->green.length = 8; | 
 | 		var->blue.offset = 0; | 
 | 		var->blue.length = 8; | 
 | 		var->transp.offset = 0; | 
 | 		var->transp.length = 0; | 
 | 		break; | 
 | 	case 16:		/* RGBA 5551 */ | 
 | 		if (var->transp.length) { | 
 | 			var->red.offset = 0; | 
 | 			var->red.length = 5; | 
 | 			var->green.offset = 5; | 
 | 			var->green.length = 5; | 
 | 			var->blue.offset = 10; | 
 | 			var->blue.length = 5; | 
 | 			var->transp.offset = 15; | 
 | 			var->transp.length = 1; | 
 | 		} else {	/* RGB 565 */ | 
 | 			var->red.offset = 11; | 
 | 			var->red.length = 5; | 
 | 			var->green.offset = 5; | 
 | 			var->green.length = 6; | 
 | 			var->blue.offset = 0; | 
 | 			var->blue.length = 5; | 
 | 			var->transp.offset = 0; | 
 | 			var->transp.length = 0; | 
 | 		} | 
 | 		break; | 
 | 	case 24:		/* RGB 888 */ | 
 | 		var->red.offset = 0; | 
 | 		var->red.length = 8; | 
 | 		var->green.offset = 8; | 
 | 		var->green.length = 8; | 
 | 		var->blue.offset = 16; | 
 | 		var->blue.length = 8; | 
 | 		var->transp.offset = 0; | 
 | 		var->transp.length = 0; | 
 | 		break; | 
 | 	case 32:		/* RGBA 8888 */ | 
 | 		var->red.offset = 16; | 
 | 		var->red.length = 8; | 
 | 		var->green.offset = 8; | 
 | 		var->green.length = 8; | 
 | 		var->blue.offset = 0; | 
 | 		var->blue.length = 8; | 
 | 		var->transp.offset = 24; | 
 | 		var->transp.length = 8; | 
 | 		break; | 
 | 	} | 
 | 	var->red.msb_right = 0; | 
 | 	var->green.msb_right = 0; | 
 | 	var->blue.msb_right = 0; | 
 | 	var->transp.msb_right = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine actually sets the video mode. It's in here where we | 
 |  * the hardware state info->par and fix which can be affected by the | 
 |  * change in par. For this driver it doesn't do much. | 
 |  */ | 
 | static int unifb_set_par(struct fb_info *info) | 
 | { | 
 | 	int hTotal, vTotal, hSyncStart, hSyncEnd, vSyncStart, vSyncEnd; | 
 | 	int format; | 
 |  | 
 | #ifdef CONFIG_PUV3_PM | 
 | 	struct clk *clk_vga; | 
 | 	u32 pixclk = 0; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i <= 10; i++) { | 
 | 		if    (info->var.xres         == unifb_modes[i].xres | 
 | 		    && info->var.yres         == unifb_modes[i].yres | 
 | 		    && info->var.upper_margin == unifb_modes[i].upper_margin | 
 | 		    && info->var.lower_margin == unifb_modes[i].lower_margin | 
 | 		    && info->var.left_margin  == unifb_modes[i].left_margin | 
 | 		    && info->var.right_margin == unifb_modes[i].right_margin | 
 | 		    && info->var.hsync_len    == unifb_modes[i].hsync_len | 
 | 		    && info->var.vsync_len    == unifb_modes[i].vsync_len) { | 
 | 			pixclk = unifb_modes[i].pixclock; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* set clock rate */ | 
 | 	clk_vga = clk_get(info->device, "VGA_CLK"); | 
 | 	if (clk_vga == ERR_PTR(-ENOENT)) | 
 | 		return -ENOENT; | 
 |  | 
 | 	if (pixclk != 0) { | 
 | 		if (clk_set_rate(clk_vga, pixclk)) { /* set clock failed */ | 
 | 			info->fix = unifb_fix; | 
 | 			info->var = unifb_default; | 
 | 			if (clk_set_rate(clk_vga, unifb_default.pixclock)) | 
 | 				return -EINVAL; | 
 | 		} | 
 | 	} | 
 | #endif | 
 |  | 
 | 	info->fix.line_length = get_line_length(info->var.xres_virtual, | 
 | 						info->var.bits_per_pixel); | 
 |  | 
 | 	hSyncStart = info->var.xres + info->var.right_margin; | 
 | 	hSyncEnd = hSyncStart + info->var.hsync_len; | 
 | 	hTotal = hSyncEnd + info->var.left_margin; | 
 |  | 
 | 	vSyncStart = info->var.yres + info->var.lower_margin; | 
 | 	vSyncEnd = vSyncStart + info->var.vsync_len; | 
 | 	vTotal = vSyncEnd + info->var.upper_margin; | 
 |  | 
 | 	switch (info->var.bits_per_pixel) { | 
 | 	case 8: | 
 | 		format = UDE_CFG_DST8; | 
 | 		break; | 
 | 	case 16: | 
 | 		format = UDE_CFG_DST16; | 
 | 		break; | 
 | 	case 24: | 
 | 		format = UDE_CFG_DST24; | 
 | 		break; | 
 | 	case 32: | 
 | 		format = UDE_CFG_DST32; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	writel(info->fix.smem_start, UDE_FSA); | 
 | 	writel(info->var.yres, UDE_LS); | 
 | 	writel(get_line_length(info->var.xres, | 
 | 			info->var.bits_per_pixel) >> 3, UDE_PS); | 
 | 			/* >> 3 for hardware required. */ | 
 | 	writel((hTotal << 16) | (info->var.xres), UDE_HAT); | 
 | 	writel(((hTotal - 1) << 16) | (info->var.xres - 1), UDE_HBT); | 
 | 	writel(((hSyncEnd - 1) << 16) | (hSyncStart - 1), UDE_HST); | 
 | 	writel((vTotal << 16) | (info->var.yres), UDE_VAT); | 
 | 	writel(((vTotal - 1) << 16) | (info->var.yres - 1), UDE_VBT); | 
 | 	writel(((vSyncEnd - 1) << 16) | (vSyncStart - 1), UDE_VST); | 
 | 	writel(UDE_CFG_GDEN_ENABLE | UDE_CFG_TIMEUP_ENABLE | 
 | 			| format | 0xC0000001, UDE_CFG); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  *  Set a single color register. The values supplied are already | 
 |  *  rounded down to the hardware's capabilities (according to the | 
 |  *  entries in the var structure). Return != 0 for invalid regno. | 
 |  */ | 
 | static int unifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | 
 | 			 u_int transp, struct fb_info *info) | 
 | { | 
 | 	if (regno >= 256)	/* no. of hw registers */ | 
 | 		return 1; | 
 |  | 
 | 	/* grayscale works only partially under directcolor */ | 
 | 	if (info->var.grayscale) { | 
 | 		/* grayscale = 0.30*R + 0.59*G + 0.11*B */ | 
 | 		red = green = blue = | 
 | 		    (red * 77 + green * 151 + blue * 28) >> 8; | 
 | 	} | 
 |  | 
 | #define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16) | 
 | 	switch (info->fix.visual) { | 
 | 	case FB_VISUAL_TRUECOLOR: | 
 | 	case FB_VISUAL_PSEUDOCOLOR: | 
 | 		red = CNVT_TOHW(red, info->var.red.length); | 
 | 		green = CNVT_TOHW(green, info->var.green.length); | 
 | 		blue = CNVT_TOHW(blue, info->var.blue.length); | 
 | 		transp = CNVT_TOHW(transp, info->var.transp.length); | 
 | 		break; | 
 | 	case FB_VISUAL_DIRECTCOLOR: | 
 | 		red = CNVT_TOHW(red, 8);	/* expect 8 bit DAC */ | 
 | 		green = CNVT_TOHW(green, 8); | 
 | 		blue = CNVT_TOHW(blue, 8); | 
 | 		/* hey, there is bug in transp handling... */ | 
 | 		transp = CNVT_TOHW(transp, 8); | 
 | 		break; | 
 | 	} | 
 | #undef CNVT_TOHW | 
 | 	/* Truecolor has hardware independent palette */ | 
 | 	if (info->fix.visual == FB_VISUAL_TRUECOLOR) { | 
 | 		u32 v; | 
 |  | 
 | 		if (regno >= 16) | 
 | 			return 1; | 
 |  | 
 | 		v = (red << info->var.red.offset) | | 
 | 		    (green << info->var.green.offset) | | 
 | 		    (blue << info->var.blue.offset) | | 
 | 		    (transp << info->var.transp.offset); | 
 | 		switch (info->var.bits_per_pixel) { | 
 | 		case 8: | 
 | 			break; | 
 | 		case 16: | 
 | 		case 24: | 
 | 		case 32: | 
 | 			((u32 *) (info->pseudo_palette))[regno] = v; | 
 | 			break; | 
 | 		default: | 
 | 			return 1; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  *  Pan or Wrap the Display | 
 |  * | 
 |  *  This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag | 
 |  */ | 
 | static int unifb_pan_display(struct fb_var_screeninfo *var, | 
 | 			   struct fb_info *info) | 
 | { | 
 | 	if (var->vmode & FB_VMODE_YWRAP) { | 
 | 		if (var->yoffset < 0 | 
 | 		    || var->yoffset >= info->var.yres_virtual | 
 | 		    || var->xoffset) | 
 | 			return -EINVAL; | 
 | 	} else { | 
 | 		if (var->xoffset + info->var.xres > info->var.xres_virtual || | 
 | 		    var->yoffset + info->var.yres > info->var.yres_virtual) | 
 | 			return -EINVAL; | 
 | 	} | 
 | 	info->var.xoffset = var->xoffset; | 
 | 	info->var.yoffset = var->yoffset; | 
 | 	if (var->vmode & FB_VMODE_YWRAP) | 
 | 		info->var.vmode |= FB_VMODE_YWRAP; | 
 | 	else | 
 | 		info->var.vmode &= ~FB_VMODE_YWRAP; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int unifb_mmap(struct fb_info *info, | 
 | 		    struct vm_area_struct *vma) | 
 | { | 
 | 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); | 
 |  | 
 | 	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len); | 
 | } | 
 |  | 
 | static struct fb_ops unifb_ops = { | 
 | 	.fb_read        = fb_sys_read, | 
 | 	.fb_write       = fb_sys_write, | 
 | 	.fb_check_var	= unifb_check_var, | 
 | 	.fb_set_par	= unifb_set_par, | 
 | 	.fb_setcolreg	= unifb_setcolreg, | 
 | 	.fb_pan_display	= unifb_pan_display, | 
 | 	.fb_fillrect	= unifb_fillrect, | 
 | 	.fb_copyarea	= unifb_copyarea, | 
 | 	.fb_imageblit   = unifb_imageblit, | 
 | 	.fb_mmap	= unifb_mmap, | 
 | }; | 
 |  | 
 | /* | 
 |  *  Initialisation | 
 |  */ | 
 | static int unifb_probe(struct platform_device *dev) | 
 | { | 
 | 	struct fb_info *info; | 
 | 	u32 unifb_regs[UNIFB_REGS_NUM]; | 
 | 	int retval = -ENOMEM; | 
 | 	struct resource *iomem; | 
 | 	void *videomemory; | 
 |  | 
 | 	videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP, | 
 | 				get_order(UNIFB_MEMSIZE)); | 
 | 	if (!videomemory) | 
 | 		goto err; | 
 |  | 
 | 	memset(videomemory, 0, UNIFB_MEMSIZE); | 
 |  | 
 | 	unifb_fix.smem_start = virt_to_phys(videomemory); | 
 | 	unifb_fix.smem_len = UNIFB_MEMSIZE; | 
 |  | 
 | 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); | 
 | 	unifb_fix.mmio_start = iomem->start; | 
 |  | 
 | 	info = framebuffer_alloc(sizeof(u32)*256, &dev->dev); | 
 | 	if (!info) | 
 | 		goto err; | 
 |  | 
 | 	info->screen_base = (char __iomem *)videomemory; | 
 | 	info->fbops = &unifb_ops; | 
 |  | 
 | 	retval = fb_find_mode(&info->var, info, NULL, | 
 | 			      unifb_modes, 10, &unifb_modes[0], 16); | 
 |  | 
 | 	if (!retval || (retval == 4)) | 
 | 		info->var = unifb_default; | 
 |  | 
 | 	info->fix = unifb_fix; | 
 | 	info->pseudo_palette = info->par; | 
 | 	info->par = NULL; | 
 | 	info->flags = FBINFO_FLAG_DEFAULT; | 
 | #ifdef FB_ACCEL_PUV3_UNIGFX | 
 | 	info->fix.accel = FB_ACCEL_PUV3_UNIGFX; | 
 | #endif | 
 |  | 
 | 	retval = fb_alloc_cmap(&info->cmap, 256, 0); | 
 | 	if (retval < 0) | 
 | 		goto err1; | 
 |  | 
 | 	retval = register_framebuffer(info); | 
 | 	if (retval < 0) | 
 | 		goto err2; | 
 | 	platform_set_drvdata(dev, info); | 
 | 	platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM); | 
 |  | 
 | 	fb_info(info, "Virtual frame buffer device, using %dM of video memory\n", | 
 | 		UNIFB_MEMSIZE >> 20); | 
 | 	return 0; | 
 | err2: | 
 | 	fb_dealloc_cmap(&info->cmap); | 
 | err1: | 
 | 	framebuffer_release(info); | 
 | err: | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int unifb_remove(struct platform_device *dev) | 
 | { | 
 | 	struct fb_info *info = platform_get_drvdata(dev); | 
 |  | 
 | 	if (info) { | 
 | 		unregister_framebuffer(info); | 
 | 		fb_dealloc_cmap(&info->cmap); | 
 | 		framebuffer_release(info); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int unifb_resume(struct platform_device *dev) | 
 | { | 
 | 	int rc = 0; | 
 | 	u32 *unifb_regs = dev->dev.platform_data; | 
 |  | 
 | 	if (dev->dev.power.power_state.event == PM_EVENT_ON) | 
 | 		return 0; | 
 |  | 
 | 	console_lock(); | 
 |  | 
 | 	if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND) { | 
 | 		writel(unifb_regs[0], UDE_FSA); | 
 | 		writel(unifb_regs[1], UDE_LS); | 
 | 		writel(unifb_regs[2], UDE_PS); | 
 | 		writel(unifb_regs[3], UDE_HAT); | 
 | 		writel(unifb_regs[4], UDE_HBT); | 
 | 		writel(unifb_regs[5], UDE_HST); | 
 | 		writel(unifb_regs[6], UDE_VAT); | 
 | 		writel(unifb_regs[7], UDE_VBT); | 
 | 		writel(unifb_regs[8], UDE_VST); | 
 | 		writel(unifb_regs[9], UDE_CFG); | 
 | 	} | 
 | 	dev->dev.power.power_state = PMSG_ON; | 
 |  | 
 | 	console_unlock(); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int unifb_suspend(struct platform_device *dev, pm_message_t mesg) | 
 | { | 
 | 	u32 *unifb_regs = dev->dev.platform_data; | 
 |  | 
 | 	unifb_regs[0] = readl(UDE_FSA); | 
 | 	unifb_regs[1] = readl(UDE_LS); | 
 | 	unifb_regs[2] = readl(UDE_PS); | 
 | 	unifb_regs[3] = readl(UDE_HAT); | 
 | 	unifb_regs[4] = readl(UDE_HBT); | 
 | 	unifb_regs[5] = readl(UDE_HST); | 
 | 	unifb_regs[6] = readl(UDE_VAT); | 
 | 	unifb_regs[7] = readl(UDE_VBT); | 
 | 	unifb_regs[8] = readl(UDE_VST); | 
 | 	unifb_regs[9] = readl(UDE_CFG); | 
 |  | 
 | 	if (mesg.event == dev->dev.power.power_state.event) | 
 | 		return 0; | 
 |  | 
 | 	switch (mesg.event) { | 
 | 	case PM_EVENT_FREEZE:		/* about to take snapshot */ | 
 | 	case PM_EVENT_PRETHAW:		/* before restoring snapshot */ | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	console_lock(); | 
 |  | 
 | 	/* do nothing... */ | 
 |  | 
 | 	console_unlock(); | 
 |  | 
 | done: | 
 | 	dev->dev.power.power_state = mesg; | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define	unifb_resume	NULL | 
 | #define unifb_suspend	NULL | 
 | #endif | 
 |  | 
 | static struct platform_driver unifb_driver = { | 
 | 	.probe	 = unifb_probe, | 
 | 	.remove  = unifb_remove, | 
 | 	.resume  = unifb_resume, | 
 | 	.suspend = unifb_suspend, | 
 | 	.driver  = { | 
 | 		.name	= "PKUnity-v3-UNIGFX", | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init unifb_init(void) | 
 | { | 
 | #ifndef MODULE | 
 | 	if (fb_get_options("unifb", NULL)) | 
 | 		return -ENODEV; | 
 | #endif | 
 |  | 
 | 	return platform_driver_register(&unifb_driver); | 
 | } | 
 |  | 
 | module_init(unifb_init); | 
 |  | 
 | static void __exit unifb_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&unifb_driver); | 
 | } | 
 |  | 
 | module_exit(unifb_exit); | 
 |  | 
 | MODULE_LICENSE("GPL v2"); |