| /* | 
 |  * IBM PowerPC Virtual I/O Infrastructure Support. | 
 |  * | 
 |  * Copyright (c) 2003 IBM Corp. | 
 |  *  Dave Engebretsen engebret@us.ibm.com | 
 |  *  Santiago Leon santil@us.ibm.com | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version | 
 |  * 2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #ifndef _ASM_POWERPC_VIO_H | 
 | #define _ASM_POWERPC_VIO_H | 
 | #ifdef __KERNEL__ | 
 |  | 
 | #include <linux/errno.h> | 
 | #include <linux/device.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/mod_devicetable.h> | 
 |  | 
 | #include <asm/hvcall.h> | 
 | #include <asm/scatterlist.h> | 
 |  | 
 | /* | 
 |  * Architecture-specific constants for drivers to | 
 |  * extract attributes of the device using vio_get_attribute() | 
 |  */ | 
 | #define VETH_MAC_ADDR "local-mac-address" | 
 | #define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters" | 
 |  | 
 | /* End architecture-specific constants */ | 
 |  | 
 | #define h_vio_signal(ua, mode) \ | 
 |   plpar_hcall_norets(H_VIO_SIGNAL, ua, mode) | 
 |  | 
 | #define VIO_IRQ_DISABLE		0UL | 
 | #define VIO_IRQ_ENABLE		1UL | 
 |  | 
 | /* | 
 |  * VIO CMO minimum entitlement for all devices and spare entitlement | 
 |  */ | 
 | #define VIO_CMO_MIN_ENT 1562624 | 
 |  | 
 | extern struct bus_type vio_bus_type; | 
 |  | 
 | struct iommu_table; | 
 |  | 
 | /* | 
 |  * Platform Facilities Option (PFO)-specific data | 
 |  */ | 
 |  | 
 | /* Starting unit address for PFO devices on the VIO BUS */ | 
 | #define VIO_BASE_PFO_UA	0x50000000 | 
 |  | 
 | /** | 
 |  * vio_pfo_op - PFO operation parameters | 
 |  * | 
 |  * @flags: h_call subfunctions and modifiers | 
 |  * @in: Input data block logical real address | 
 |  * @inlen: If non-negative, the length of the input data block.  If negative, | 
 |  *	the length of the input data descriptor list in bytes. | 
 |  * @out: Output data block logical real address | 
 |  * @outlen: If non-negative, the length of the input data block.  If negative, | 
 |  *	the length of the input data descriptor list in bytes. | 
 |  * @csbcpb: Logical real address of the 4k naturally-aligned storage block | 
 |  *	containing the CSB & optional FC field specific CPB | 
 |  * @timeout: # of milliseconds to retry h_call, 0 for no timeout. | 
 |  * @hcall_err: pointer to return the h_call return value, else NULL | 
 |  */ | 
 | struct vio_pfo_op { | 
 | 	u64 flags; | 
 | 	s64 in; | 
 | 	s64 inlen; | 
 | 	s64 out; | 
 | 	s64 outlen; | 
 | 	u64 csbcpb; | 
 | 	void *done; | 
 | 	unsigned long handle; | 
 | 	unsigned int timeout; | 
 | 	long hcall_err; | 
 | }; | 
 |  | 
 | /* End PFO specific data */ | 
 |  | 
 | enum vio_dev_family { | 
 | 	VDEVICE,	/* The OF node is a child of /vdevice */ | 
 | 	PFO,		/* The OF node is a child of /ibm,platform-facilities */ | 
 | }; | 
 |  | 
 | /** | 
 |  * vio_dev - This structure is used to describe virtual I/O devices. | 
 |  * | 
 |  * @desired: set from return of driver's get_desired_dma() function | 
 |  * @entitled: bytes of IO data that has been reserved for this device. | 
 |  * @allocated: bytes of IO data currently in use by the device. | 
 |  * @allocs_failed: number of DMA failures due to insufficient entitlement. | 
 |  */ | 
 | struct vio_dev { | 
 | 	const char *name; | 
 | 	const char *type; | 
 | 	uint32_t unit_address; | 
 | 	uint32_t resource_id; | 
 | 	unsigned int irq; | 
 | 	struct { | 
 | 		size_t desired; | 
 | 		size_t entitled; | 
 | 		size_t allocated; | 
 | 		atomic_t allocs_failed; | 
 | 	} cmo; | 
 | 	enum vio_dev_family family; | 
 | 	struct device dev; | 
 | }; | 
 |  | 
 | struct vio_driver { | 
 | 	const char *name; | 
 | 	const struct vio_device_id *id_table; | 
 | 	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); | 
 | 	int (*remove)(struct vio_dev *dev); | 
 | 	/* A driver must have a get_desired_dma() function to | 
 | 	 * be loaded in a CMO environment if it uses DMA. | 
 | 	 */ | 
 | 	unsigned long (*get_desired_dma)(struct vio_dev *dev); | 
 | 	const struct dev_pm_ops *pm; | 
 | 	struct device_driver driver; | 
 | }; | 
 |  | 
 | extern int __vio_register_driver(struct vio_driver *drv, struct module *owner, | 
 | 				 const char *mod_name); | 
 | /* | 
 |  * vio_register_driver must be a macro so that KBUILD_MODNAME can be expanded | 
 |  */ | 
 | #define vio_register_driver(driver)		\ | 
 | 	__vio_register_driver(driver, THIS_MODULE, KBUILD_MODNAME) | 
 | extern void vio_unregister_driver(struct vio_driver *drv); | 
 |  | 
 | extern int vio_cmo_entitlement_update(size_t); | 
 | extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); | 
 |  | 
 | extern void vio_unregister_device(struct vio_dev *dev); | 
 |  | 
 | extern int vio_h_cop_sync(struct vio_dev *vdev, struct vio_pfo_op *op); | 
 |  | 
 | struct device_node; | 
 |  | 
 | extern struct vio_dev *vio_register_device_node( | 
 | 		struct device_node *node_vdev); | 
 | extern const void *vio_get_attribute(struct vio_dev *vdev, char *which, | 
 | 		int *length); | 
 | #ifdef CONFIG_PPC_PSERIES | 
 | extern struct vio_dev *vio_find_node(struct device_node *vnode); | 
 | extern int vio_enable_interrupts(struct vio_dev *dev); | 
 | extern int vio_disable_interrupts(struct vio_dev *dev); | 
 | #else | 
 | static inline int vio_enable_interrupts(struct vio_dev *dev) | 
 | { | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static inline struct vio_driver *to_vio_driver(struct device_driver *drv) | 
 | { | 
 | 	return container_of(drv, struct vio_driver, driver); | 
 | } | 
 |  | 
 | static inline struct vio_dev *to_vio_dev(struct device *dev) | 
 | { | 
 | 	return container_of(dev, struct vio_dev, dev); | 
 | } | 
 |  | 
 | #endif /* __KERNEL__ */ | 
 | #endif /* _ASM_POWERPC_VIO_H */ |