| /****************************************************************************** | 
 |  * | 
 |  * Module Name: nsutils - Utilities for accessing ACPI namespace, accessing | 
 |  *                        parents and siblings and Scope manipulation | 
 |  * | 
 |  *****************************************************************************/ | 
 |  | 
 | /* | 
 |  * Copyright (C) 2000 - 2007, R. Byron Moore | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions, and the following disclaimer, | 
 |  *    without modification. | 
 |  * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
 |  *    substantially similar to the "NO WARRANTY" disclaimer below | 
 |  *    ("Disclaimer") and any redistribution must be conditioned upon | 
 |  *    including a substantially similar Disclaimer requirement for further | 
 |  *    binary redistribution. | 
 |  * 3. Neither the names of the above-listed copyright holders nor the names | 
 |  *    of any contributors may be used to endorse or promote products derived | 
 |  *    from this software without specific prior written permission. | 
 |  * | 
 |  * Alternatively, this software may be distributed under the terms of the | 
 |  * GNU General Public License ("GPL") version 2 as published by the Free | 
 |  * Software Foundation. | 
 |  * | 
 |  * NO WARRANTY | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
 |  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGES. | 
 |  */ | 
 |  | 
 | #include <acpi/acpi.h> | 
 | #include <acpi/acnamesp.h> | 
 | #include <acpi/amlcode.h> | 
 | #include <acpi/actables.h> | 
 |  | 
 | #define _COMPONENT          ACPI_NAMESPACE | 
 | ACPI_MODULE_NAME("nsutils") | 
 |  | 
 | /* Local prototypes */ | 
 | static u8 acpi_ns_valid_path_separator(char sep); | 
 |  | 
 | #ifdef ACPI_OBSOLETE_FUNCTIONS | 
 | acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search); | 
 | #endif | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_report_error | 
 |  * | 
 |  * PARAMETERS:  module_name         - Caller's module name (for error output) | 
 |  *              line_number         - Caller's line number (for error output) | 
 |  *              internal_name       - Name or path of the namespace node | 
 |  *              lookup_status       - Exception code from NS lookup | 
 |  * | 
 |  * RETURN:      None | 
 |  * | 
 |  * DESCRIPTION: Print warning message with full pathname | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | void | 
 | acpi_ns_report_error(char *module_name, | 
 | 		     u32 line_number, | 
 | 		     char *internal_name, acpi_status lookup_status) | 
 | { | 
 | 	acpi_status status; | 
 | 	u32 bad_name; | 
 | 	char *name = NULL; | 
 |  | 
 | 	acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number); | 
 |  | 
 | 	if (lookup_status == AE_BAD_CHARACTER) { | 
 |  | 
 | 		/* There is a non-ascii character in the name */ | 
 |  | 
 | 		ACPI_MOVE_32_TO_32(&bad_name, internal_name); | 
 | 		acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name); | 
 | 	} else { | 
 | 		/* Convert path to external format */ | 
 |  | 
 | 		status = acpi_ns_externalize_name(ACPI_UINT32_MAX, | 
 | 						  internal_name, NULL, &name); | 
 |  | 
 | 		/* Print target name */ | 
 |  | 
 | 		if (ACPI_SUCCESS(status)) { | 
 | 			acpi_os_printf("[%s]", name); | 
 | 		} else { | 
 | 			acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); | 
 | 		} | 
 |  | 
 | 		if (name) { | 
 | 			ACPI_FREE(name); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	acpi_os_printf(" Namespace lookup failure, %s\n", | 
 | 		       acpi_format_exception(lookup_status)); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_report_method_error | 
 |  * | 
 |  * PARAMETERS:  module_name         - Caller's module name (for error output) | 
 |  *              line_number         - Caller's line number (for error output) | 
 |  *              Message             - Error message to use on failure | 
 |  *              prefix_node         - Prefix relative to the path | 
 |  *              Path                - Path to the node (optional) | 
 |  *              method_status       - Execution status | 
 |  * | 
 |  * RETURN:      None | 
 |  * | 
 |  * DESCRIPTION: Print warning message with full pathname | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | void | 
 | acpi_ns_report_method_error(char *module_name, | 
 | 			    u32 line_number, | 
 | 			    char *message, | 
 | 			    struct acpi_namespace_node *prefix_node, | 
 | 			    char *path, acpi_status method_status) | 
 | { | 
 | 	acpi_status status; | 
 | 	struct acpi_namespace_node *node = prefix_node; | 
 |  | 
 | 	acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number); | 
 |  | 
 | 	if (path) { | 
 | 		status = | 
 | 		    acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, | 
 | 				     &node); | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			acpi_os_printf("[Could not get node by pathname]"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	acpi_ns_print_node_pathname(node, message); | 
 | 	acpi_os_printf(", %s\n", acpi_format_exception(method_status)); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_print_node_pathname | 
 |  * | 
 |  * PARAMETERS:  Node            - Object | 
 |  *              Message         - Prefix message | 
 |  * | 
 |  * DESCRIPTION: Print an object's full namespace pathname | 
 |  *              Manages allocation/freeing of a pathname buffer | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | void | 
 | acpi_ns_print_node_pathname(struct acpi_namespace_node *node, char *message) | 
 | { | 
 | 	struct acpi_buffer buffer; | 
 | 	acpi_status status; | 
 |  | 
 | 	if (!node) { | 
 | 		acpi_os_printf("[NULL NAME]"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Convert handle to full pathname and print it (with supplied message) */ | 
 |  | 
 | 	buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; | 
 |  | 
 | 	status = acpi_ns_handle_to_pathname(node, &buffer); | 
 | 	if (ACPI_SUCCESS(status)) { | 
 | 		if (message) { | 
 | 			acpi_os_printf("%s ", message); | 
 | 		} | 
 |  | 
 | 		acpi_os_printf("[%s] (Node %p)", (char *)buffer.pointer, node); | 
 | 		ACPI_FREE(buffer.pointer); | 
 | 	} | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_valid_root_prefix | 
 |  * | 
 |  * PARAMETERS:  Prefix          - Character to be checked | 
 |  * | 
 |  * RETURN:      TRUE if a valid prefix | 
 |  * | 
 |  * DESCRIPTION: Check if a character is a valid ACPI Root prefix | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u8 acpi_ns_valid_root_prefix(char prefix) | 
 | { | 
 |  | 
 | 	return ((u8) (prefix == '\\')); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_valid_path_separator | 
 |  * | 
 |  * PARAMETERS:  Sep         - Character to be checked | 
 |  * | 
 |  * RETURN:      TRUE if a valid path separator | 
 |  * | 
 |  * DESCRIPTION: Check if a character is a valid ACPI path separator | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | static u8 acpi_ns_valid_path_separator(char sep) | 
 | { | 
 |  | 
 | 	return ((u8) (sep == '.')); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_get_type | 
 |  * | 
 |  * PARAMETERS:  Node        - Parent Node to be examined | 
 |  * | 
 |  * RETURN:      Type field from Node whose handle is passed | 
 |  * | 
 |  * DESCRIPTION: Return the type of a Namespace node | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_object_type acpi_ns_get_type(struct acpi_namespace_node * node) | 
 | { | 
 | 	ACPI_FUNCTION_TRACE(ns_get_type); | 
 |  | 
 | 	if (!node) { | 
 | 		ACPI_WARNING((AE_INFO, "Null Node parameter")); | 
 | 		return_UINT32(ACPI_TYPE_ANY); | 
 | 	} | 
 |  | 
 | 	return_UINT32((acpi_object_type) node->type); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_local | 
 |  * | 
 |  * PARAMETERS:  Type        - A namespace object type | 
 |  * | 
 |  * RETURN:      LOCAL if names must be found locally in objects of the | 
 |  *              passed type, 0 if enclosing scopes should be searched | 
 |  * | 
 |  * DESCRIPTION: Returns scope rule for the given object type. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u32 acpi_ns_local(acpi_object_type type) | 
 | { | 
 | 	ACPI_FUNCTION_TRACE(ns_local); | 
 |  | 
 | 	if (!acpi_ut_valid_object_type(type)) { | 
 |  | 
 | 		/* Type code out of range  */ | 
 |  | 
 | 		ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type)); | 
 | 		return_UINT32(ACPI_NS_NORMAL); | 
 | 	} | 
 |  | 
 | 	return_UINT32((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_get_internal_name_length | 
 |  * | 
 |  * PARAMETERS:  Info            - Info struct initialized with the | 
 |  *                                external name pointer. | 
 |  * | 
 |  * RETURN:      None | 
 |  * | 
 |  * DESCRIPTION: Calculate the length of the internal (AML) namestring | 
 |  *              corresponding to the external (ASL) namestring. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info) | 
 | { | 
 | 	char *next_external_char; | 
 | 	u32 i; | 
 |  | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	next_external_char = info->external_name; | 
 | 	info->num_carats = 0; | 
 | 	info->num_segments = 0; | 
 | 	info->fully_qualified = FALSE; | 
 |  | 
 | 	/* | 
 | 	 * For the internal name, the required length is 4 bytes per segment, plus | 
 | 	 * 1 each for root_prefix, multi_name_prefix_op, segment count, trailing null | 
 | 	 * (which is not really needed, but no there's harm in putting it there) | 
 | 	 * | 
 | 	 * strlen() + 1 covers the first name_seg, which has no path separator | 
 | 	 */ | 
 | 	if (acpi_ns_valid_root_prefix(next_external_char[0])) { | 
 | 		info->fully_qualified = TRUE; | 
 | 		next_external_char++; | 
 | 	} else { | 
 | 		/* | 
 | 		 * Handle Carat prefixes | 
 | 		 */ | 
 | 		while (*next_external_char == '^') { | 
 | 			info->num_carats++; | 
 | 			next_external_char++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Determine the number of ACPI name "segments" by counting the number of | 
 | 	 * path separators within the string. Start with one segment since the | 
 | 	 * segment count is [(# separators) + 1], and zero separators is ok. | 
 | 	 */ | 
 | 	if (*next_external_char) { | 
 | 		info->num_segments = 1; | 
 | 		for (i = 0; next_external_char[i]; i++) { | 
 | 			if (acpi_ns_valid_path_separator(next_external_char[i])) { | 
 | 				info->num_segments++; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	info->length = (ACPI_NAME_SIZE * info->num_segments) + | 
 | 	    4 + info->num_carats; | 
 |  | 
 | 	info->next_external_char = next_external_char; | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_build_internal_name | 
 |  * | 
 |  * PARAMETERS:  Info            - Info struct fully initialized | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Construct the internal (AML) namestring | 
 |  *              corresponding to the external (ASL) namestring. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) | 
 | { | 
 | 	u32 num_segments = info->num_segments; | 
 | 	char *internal_name = info->internal_name; | 
 | 	char *external_name = info->next_external_char; | 
 | 	char *result = NULL; | 
 | 	acpi_native_uint i; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_build_internal_name); | 
 |  | 
 | 	/* Setup the correct prefixes, counts, and pointers */ | 
 |  | 
 | 	if (info->fully_qualified) { | 
 | 		internal_name[0] = '\\'; | 
 |  | 
 | 		if (num_segments <= 1) { | 
 | 			result = &internal_name[1]; | 
 | 		} else if (num_segments == 2) { | 
 | 			internal_name[1] = AML_DUAL_NAME_PREFIX; | 
 | 			result = &internal_name[2]; | 
 | 		} else { | 
 | 			internal_name[1] = AML_MULTI_NAME_PREFIX_OP; | 
 | 			internal_name[2] = (char)num_segments; | 
 | 			result = &internal_name[3]; | 
 | 		} | 
 | 	} else { | 
 | 		/* | 
 | 		 * Not fully qualified. | 
 | 		 * Handle Carats first, then append the name segments | 
 | 		 */ | 
 | 		i = 0; | 
 | 		if (info->num_carats) { | 
 | 			for (i = 0; i < info->num_carats; i++) { | 
 | 				internal_name[i] = '^'; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (num_segments <= 1) { | 
 | 			result = &internal_name[i]; | 
 | 		} else if (num_segments == 2) { | 
 | 			internal_name[i] = AML_DUAL_NAME_PREFIX; | 
 | 			result = &internal_name[(acpi_native_uint) (i + 1)]; | 
 | 		} else { | 
 | 			internal_name[i] = AML_MULTI_NAME_PREFIX_OP; | 
 | 			internal_name[(acpi_native_uint) (i + 1)] = | 
 | 			    (char)num_segments; | 
 | 			result = &internal_name[(acpi_native_uint) (i + 2)]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Build the name (minus path separators) */ | 
 |  | 
 | 	for (; num_segments; num_segments--) { | 
 | 		for (i = 0; i < ACPI_NAME_SIZE; i++) { | 
 | 			if (acpi_ns_valid_path_separator(*external_name) || | 
 | 			    (*external_name == 0)) { | 
 |  | 
 | 				/* Pad the segment with underscore(s) if segment is short */ | 
 |  | 
 | 				result[i] = '_'; | 
 | 			} else { | 
 | 				/* Convert the character to uppercase and save it */ | 
 |  | 
 | 				result[i] = | 
 | 				    (char)ACPI_TOUPPER((int)*external_name); | 
 | 				external_name++; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Now we must have a path separator, or the pathname is bad */ | 
 |  | 
 | 		if (!acpi_ns_valid_path_separator(*external_name) && | 
 | 		    (*external_name != 0)) { | 
 | 			return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 		} | 
 |  | 
 | 		/* Move on the next segment */ | 
 |  | 
 | 		external_name++; | 
 | 		result += ACPI_NAME_SIZE; | 
 | 	} | 
 |  | 
 | 	/* Terminate the string */ | 
 |  | 
 | 	*result = 0; | 
 |  | 
 | 	if (info->fully_qualified) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_EXEC, | 
 | 				  "Returning [%p] (abs) \"\\%s\"\n", | 
 | 				  internal_name, internal_name)); | 
 | 	} else { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Returning [%p] (rel) \"%s\"\n", | 
 | 				  internal_name, internal_name)); | 
 | 	} | 
 |  | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_internalize_name | 
 |  * | 
 |  * PARAMETERS:  *external_name          - External representation of name | 
 |  *              **Converted Name        - Where to return the resulting | 
 |  *                                        internal represention of the name | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Convert an external representation (e.g. "\_PR_.CPU0") | 
 |  *              to internal form (e.g. 5c 2f 02 5f 50 52 5f 43 50 55 30) | 
 |  * | 
 |  *******************************************************************************/ | 
 |  | 
 | acpi_status acpi_ns_internalize_name(char *external_name, char **converted_name) | 
 | { | 
 | 	char *internal_name; | 
 | 	struct acpi_namestring_info info; | 
 | 	acpi_status status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_internalize_name); | 
 |  | 
 | 	if ((!external_name) || (*external_name == 0) || (!converted_name)) { | 
 | 		return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 	} | 
 |  | 
 | 	/* Get the length of the new internal name */ | 
 |  | 
 | 	info.external_name = external_name; | 
 | 	acpi_ns_get_internal_name_length(&info); | 
 |  | 
 | 	/* We need a segment to store the internal  name */ | 
 |  | 
 | 	internal_name = ACPI_ALLOCATE_ZEROED(info.length); | 
 | 	if (!internal_name) { | 
 | 		return_ACPI_STATUS(AE_NO_MEMORY); | 
 | 	} | 
 |  | 
 | 	/* Build the name */ | 
 |  | 
 | 	info.internal_name = internal_name; | 
 | 	status = acpi_ns_build_internal_name(&info); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_FREE(internal_name); | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	*converted_name = internal_name; | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_externalize_name | 
 |  * | 
 |  * PARAMETERS:  internal_name_length - Lenth of the internal name below | 
 |  *              internal_name       - Internal representation of name | 
 |  *              converted_name_length - Where the length is returned | 
 |  *              converted_name      - Where the resulting external name | 
 |  *                                    is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Convert internal name (e.g. 5c 2f 02 5f 50 52 5f 43 50 55 30) | 
 |  *              to its external (printable) form (e.g. "\_PR_.CPU0") | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_ns_externalize_name(u32 internal_name_length, | 
 | 			 char *internal_name, | 
 | 			 u32 * converted_name_length, char **converted_name) | 
 | { | 
 | 	acpi_native_uint names_index = 0; | 
 | 	acpi_native_uint num_segments = 0; | 
 | 	acpi_native_uint required_length; | 
 | 	acpi_native_uint prefix_length = 0; | 
 | 	acpi_native_uint i = 0; | 
 | 	acpi_native_uint j = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_externalize_name); | 
 |  | 
 | 	if (!internal_name_length || !internal_name || !converted_name) { | 
 | 		return_ACPI_STATUS(AE_BAD_PARAMETER); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check for a prefix (one '\' | one or more '^'). | 
 | 	 */ | 
 | 	switch (internal_name[0]) { | 
 | 	case '\\': | 
 | 		prefix_length = 1; | 
 | 		break; | 
 |  | 
 | 	case '^': | 
 | 		for (i = 0; i < internal_name_length; i++) { | 
 | 			if (internal_name[i] == '^') { | 
 | 				prefix_length = i + 1; | 
 | 			} else { | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (i == internal_name_length) { | 
 | 			prefix_length = i; | 
 | 		} | 
 |  | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check for object names.  Note that there could be 0-255 of these | 
 | 	 * 4-byte elements. | 
 | 	 */ | 
 | 	if (prefix_length < internal_name_length) { | 
 | 		switch (internal_name[prefix_length]) { | 
 | 		case AML_MULTI_NAME_PREFIX_OP: | 
 |  | 
 | 			/* <count> 4-byte names */ | 
 |  | 
 | 			names_index = prefix_length + 2; | 
 | 			num_segments = (acpi_native_uint) (u8) | 
 | 			    internal_name[(acpi_native_uint) | 
 | 					  (prefix_length + 1)]; | 
 | 			break; | 
 |  | 
 | 		case AML_DUAL_NAME_PREFIX: | 
 |  | 
 | 			/* Two 4-byte names */ | 
 |  | 
 | 			names_index = prefix_length + 1; | 
 | 			num_segments = 2; | 
 | 			break; | 
 |  | 
 | 		case 0: | 
 |  | 
 | 			/* null_name */ | 
 |  | 
 | 			names_index = 0; | 
 | 			num_segments = 0; | 
 | 			break; | 
 |  | 
 | 		default: | 
 |  | 
 | 			/* one 4-byte name */ | 
 |  | 
 | 			names_index = prefix_length; | 
 | 			num_segments = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Calculate the length of converted_name, which equals the length | 
 | 	 * of the prefix, length of all object names, length of any required | 
 | 	 * punctuation ('.') between object names, plus the NULL terminator. | 
 | 	 */ | 
 | 	required_length = prefix_length + (4 * num_segments) + | 
 | 	    ((num_segments > 0) ? (num_segments - 1) : 0) + 1; | 
 |  | 
 | 	/* | 
 | 	 * Check to see if we're still in bounds.  If not, there's a problem | 
 | 	 * with internal_name (invalid format). | 
 | 	 */ | 
 | 	if (required_length > internal_name_length) { | 
 | 		ACPI_ERROR((AE_INFO, "Invalid internal name")); | 
 | 		return_ACPI_STATUS(AE_BAD_PATHNAME); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Build converted_name | 
 | 	 */ | 
 | 	*converted_name = ACPI_ALLOCATE_ZEROED(required_length); | 
 | 	if (!(*converted_name)) { | 
 | 		return_ACPI_STATUS(AE_NO_MEMORY); | 
 | 	} | 
 |  | 
 | 	j = 0; | 
 |  | 
 | 	for (i = 0; i < prefix_length; i++) { | 
 | 		(*converted_name)[j++] = internal_name[i]; | 
 | 	} | 
 |  | 
 | 	if (num_segments > 0) { | 
 | 		for (i = 0; i < num_segments; i++) { | 
 | 			if (i > 0) { | 
 | 				(*converted_name)[j++] = '.'; | 
 | 			} | 
 |  | 
 | 			(*converted_name)[j++] = internal_name[names_index++]; | 
 | 			(*converted_name)[j++] = internal_name[names_index++]; | 
 | 			(*converted_name)[j++] = internal_name[names_index++]; | 
 | 			(*converted_name)[j++] = internal_name[names_index++]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (converted_name_length) { | 
 | 		*converted_name_length = (u32) required_length; | 
 | 	} | 
 |  | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_map_handle_to_node | 
 |  * | 
 |  * PARAMETERS:  Handle          - Handle to be converted to an Node | 
 |  * | 
 |  * RETURN:      A Name table entry pointer | 
 |  * | 
 |  * DESCRIPTION: Convert a namespace handle to a real Node | 
 |  * | 
 |  * Note: Real integer handles would allow for more verification | 
 |  *       and keep all pointers within this subsystem - however this introduces | 
 |  *       more (and perhaps unnecessary) overhead. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle) | 
 | { | 
 |  | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	/* | 
 | 	 * Simple implementation | 
 | 	 */ | 
 | 	if ((!handle) || (handle == ACPI_ROOT_OBJECT)) { | 
 | 		return (acpi_gbl_root_node); | 
 | 	} | 
 |  | 
 | 	/* We can at least attempt to verify the handle */ | 
 |  | 
 | 	if (ACPI_GET_DESCRIPTOR_TYPE(handle) != ACPI_DESC_TYPE_NAMED) { | 
 | 		return (NULL); | 
 | 	} | 
 |  | 
 | 	return (ACPI_CAST_PTR(struct acpi_namespace_node, handle)); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_convert_entry_to_handle | 
 |  * | 
 |  * PARAMETERS:  Node          - Node to be converted to a Handle | 
 |  * | 
 |  * RETURN:      A user handle | 
 |  * | 
 |  * DESCRIPTION: Convert a real Node to a namespace handle | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_handle acpi_ns_convert_entry_to_handle(struct acpi_namespace_node *node) | 
 | { | 
 |  | 
 | 	/* | 
 | 	 * Simple implementation for now; | 
 | 	 */ | 
 | 	return ((acpi_handle) node); | 
 |  | 
 | /* Example future implementation --------------------- | 
 |  | 
 | 	if (!Node) | 
 | 	{ | 
 | 		return (NULL); | 
 | 	} | 
 |  | 
 | 	if (Node == acpi_gbl_root_node) | 
 | 	{ | 
 | 		return (ACPI_ROOT_OBJECT); | 
 | 	} | 
 |  | 
 | 	return ((acpi_handle) Node); | 
 | ------------------------------------------------------*/ | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_terminate | 
 |  * | 
 |  * PARAMETERS:  none | 
 |  * | 
 |  * RETURN:      none | 
 |  * | 
 |  * DESCRIPTION: free memory allocated for namespace and ACPI table storage. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | void acpi_ns_terminate(void) | 
 | { | 
 | 	union acpi_operand_object *obj_desc; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_terminate); | 
 |  | 
 | 	/* | 
 | 	 * 1) Free the entire namespace -- all nodes and objects | 
 | 	 * | 
 | 	 * Delete all object descriptors attached to namepsace nodes | 
 | 	 */ | 
 | 	acpi_ns_delete_namespace_subtree(acpi_gbl_root_node); | 
 |  | 
 | 	/* Detach any objects attached to the root */ | 
 |  | 
 | 	obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node); | 
 | 	if (obj_desc) { | 
 | 		acpi_ns_detach_object(acpi_gbl_root_node); | 
 | 	} | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n")); | 
 | 	return_VOID; | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_opens_scope | 
 |  * | 
 |  * PARAMETERS:  Type        - A valid namespace type | 
 |  * | 
 |  * RETURN:      NEWSCOPE if the passed type "opens a name scope" according | 
 |  *              to the ACPI specification, else 0 | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | u32 acpi_ns_opens_scope(acpi_object_type type) | 
 | { | 
 | 	ACPI_FUNCTION_TRACE_STR(ns_opens_scope, acpi_ut_get_type_name(type)); | 
 |  | 
 | 	if (!acpi_ut_valid_object_type(type)) { | 
 |  | 
 | 		/* type code out of range  */ | 
 |  | 
 | 		ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type)); | 
 | 		return_UINT32(ACPI_NS_NORMAL); | 
 | 	} | 
 |  | 
 | 	return_UINT32(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_get_node | 
 |  * | 
 |  * PARAMETERS:  *Pathname   - Name to be found, in external (ASL) format. The | 
 |  *                            \ (backslash) and ^ (carat) prefixes, and the | 
 |  *                            . (period) to separate segments are supported. | 
 |  *              prefix_node  - Root of subtree to be searched, or NS_ALL for the | 
 |  *                            root of the name space.  If Name is fully | 
 |  *                            qualified (first s8 is '\'), the passed value | 
 |  *                            of Scope will not be accessed. | 
 |  *              Flags       - Used to indicate whether to perform upsearch or | 
 |  *                            not. | 
 |  *              return_node - Where the Node is returned | 
 |  * | 
 |  * DESCRIPTION: Look up a name relative to a given scope and return the | 
 |  *              corresponding Node.  NOTE: Scope can be null. | 
 |  * | 
 |  * MUTEX:       Locks namespace | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_ns_get_node(struct acpi_namespace_node *prefix_node, | 
 | 		 char *pathname, | 
 | 		 u32 flags, struct acpi_namespace_node **return_node) | 
 | { | 
 | 	union acpi_generic_state scope_info; | 
 | 	acpi_status status; | 
 | 	char *internal_path; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE_PTR(ns_get_node, pathname); | 
 |  | 
 | 	if (!pathname) { | 
 | 		*return_node = prefix_node; | 
 | 		if (!prefix_node) { | 
 | 			*return_node = acpi_gbl_root_node; | 
 | 		} | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	} | 
 |  | 
 | 	/* Convert path to internal representation */ | 
 |  | 
 | 	status = acpi_ns_internalize_name(pathname, &internal_path); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		return_ACPI_STATUS(status); | 
 | 	} | 
 |  | 
 | 	/* Must lock namespace during lookup */ | 
 |  | 
 | 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	/* Setup lookup scope (search starting point) */ | 
 |  | 
 | 	scope_info.scope.node = prefix_node; | 
 |  | 
 | 	/* Lookup the name in the namespace */ | 
 |  | 
 | 	status = acpi_ns_lookup(&scope_info, internal_path, ACPI_TYPE_ANY, | 
 | 				ACPI_IMODE_EXECUTE, | 
 | 				(flags | ACPI_NS_DONT_OPEN_SCOPE), NULL, | 
 | 				return_node); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s, %s\n", | 
 | 				  pathname, acpi_format_exception(status))); | 
 | 	} | 
 |  | 
 | 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | 
 |  | 
 |       cleanup: | 
 | 	ACPI_FREE(internal_path); | 
 | 	return_ACPI_STATUS(status); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_get_parent_node | 
 |  * | 
 |  * PARAMETERS:  Node       - Current table entry | 
 |  * | 
 |  * RETURN:      Parent entry of the given entry | 
 |  * | 
 |  * DESCRIPTION: Obtain the parent entry for a given entry in the namespace. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | struct acpi_namespace_node *acpi_ns_get_parent_node(struct acpi_namespace_node | 
 | 						    *node) | 
 | { | 
 | 	ACPI_FUNCTION_ENTRY(); | 
 |  | 
 | 	if (!node) { | 
 | 		return (NULL); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Walk to the end of this peer list. The last entry is marked with a flag | 
 | 	 * and the peer pointer is really a pointer back to the parent. This saves | 
 | 	 * putting a parent back pointer in each and every named object! | 
 | 	 */ | 
 | 	while (!(node->flags & ANOBJ_END_OF_PEER_LIST)) { | 
 | 		node = node->peer; | 
 | 	} | 
 |  | 
 | 	return (node->peer); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_get_next_valid_node | 
 |  * | 
 |  * PARAMETERS:  Node       - Current table entry | 
 |  * | 
 |  * RETURN:      Next valid Node in the linked node list. NULL if no more valid | 
 |  *              nodes. | 
 |  * | 
 |  * DESCRIPTION: Find the next valid node within a name table. | 
 |  *              Useful for implementing NULL-end-of-list loops. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | struct acpi_namespace_node *acpi_ns_get_next_valid_node(struct | 
 | 							acpi_namespace_node | 
 | 							*node) | 
 | { | 
 |  | 
 | 	/* If we are at the end of this peer list, return NULL */ | 
 |  | 
 | 	if (node->flags & ANOBJ_END_OF_PEER_LIST) { | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* Otherwise just return the next peer */ | 
 |  | 
 | 	return (node->peer); | 
 | } | 
 |  | 
 | #ifdef ACPI_OBSOLETE_FUNCTIONS | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_ns_find_parent_name | 
 |  * | 
 |  * PARAMETERS:  *child_node            - Named Obj whose name is to be found | 
 |  * | 
 |  * RETURN:      The ACPI name | 
 |  * | 
 |  * DESCRIPTION: Search for the given obj in its parent scope and return the | 
 |  *              name segment, or "????" if the parent name can't be found | 
 |  *              (which "should not happen"). | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node * child_node) | 
 | { | 
 | 	struct acpi_namespace_node *parent_node; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE(ns_find_parent_name); | 
 |  | 
 | 	if (child_node) { | 
 |  | 
 | 		/* Valid entry.  Get the parent Node */ | 
 |  | 
 | 		parent_node = acpi_ns_get_parent_node(child_node); | 
 | 		if (parent_node) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, | 
 | 					  "Parent of %p [%4.4s] is %p [%4.4s]\n", | 
 | 					  child_node, | 
 | 					  acpi_ut_get_node_name(child_node), | 
 | 					  parent_node, | 
 | 					  acpi_ut_get_node_name(parent_node))); | 
 |  | 
 | 			if (parent_node->name.integer) { | 
 | 				return_VALUE((acpi_name) parent_node->name. | 
 | 					     integer); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_EXEC, | 
 | 				  "Unable to find parent of %p (%4.4s)\n", | 
 | 				  child_node, | 
 | 				  acpi_ut_get_node_name(child_node))); | 
 | 	} | 
 |  | 
 | 	return_VALUE(ACPI_UNKNOWN_NAME); | 
 | } | 
 | #endif |