| /* | 
 |  * cdc_ncm.c | 
 |  * | 
 |  * Copyright (C) ST-Ericsson 2010-2012 | 
 |  * Contact: Alexey Orishko <alexey.orishko@stericsson.com> | 
 |  * Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com> | 
 |  * | 
 |  * USB Host Driver for Network Control Model (NCM) | 
 |  * http://www.usb.org/developers/docs/devclass_docs/NCM10_012011.zip | 
 |  * | 
 |  * The NCM encoding, decoding and initialization logic | 
 |  * derives from FreeBSD 8.x. if_cdce.c and if_cdcereg.h | 
 |  * | 
 |  * This software is available to you under a choice of one of two | 
 |  * licenses. You may choose this file to be licensed under the terms | 
 |  * of the GNU General Public License (GPL) Version 2 or the 2-clause | 
 |  * BSD license listed below: | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer. | 
 |  * 2. Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in the | 
 |  *    documentation and/or other materials provided with the distribution. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND | 
 |  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
 |  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
 |  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE | 
 |  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | 
 |  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | 
 |  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
 |  * SUCH DAMAGE. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/ctype.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/hrtimer.h> | 
 | #include <linux/atomic.h> | 
 | #include <linux/usb/usbnet.h> | 
 | #include <linux/usb/cdc.h> | 
 | #include <linux/usb/cdc_ncm.h> | 
 |  | 
 | #if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM) | 
 | static bool prefer_mbim = true; | 
 | #else | 
 | static bool prefer_mbim; | 
 | #endif | 
 | module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR); | 
 | MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions"); | 
 |  | 
 | static void cdc_ncm_txpath_bh(unsigned long param); | 
 | static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx); | 
 | static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer); | 
 | static struct usb_driver cdc_ncm_driver; | 
 |  | 
 | struct cdc_ncm_stats { | 
 | 	char stat_string[ETH_GSTRING_LEN]; | 
 | 	int sizeof_stat; | 
 | 	int stat_offset; | 
 | }; | 
 |  | 
 | #define CDC_NCM_STAT(str, m) { \ | 
 | 		.stat_string = str, \ | 
 | 		.sizeof_stat = sizeof(((struct cdc_ncm_ctx *)0)->m), \ | 
 | 		.stat_offset = offsetof(struct cdc_ncm_ctx, m) } | 
 | #define CDC_NCM_SIMPLE_STAT(m)	CDC_NCM_STAT(__stringify(m), m) | 
 |  | 
 | static const struct cdc_ncm_stats cdc_ncm_gstrings_stats[] = { | 
 | 	CDC_NCM_SIMPLE_STAT(tx_reason_ntb_full), | 
 | 	CDC_NCM_SIMPLE_STAT(tx_reason_ndp_full), | 
 | 	CDC_NCM_SIMPLE_STAT(tx_reason_timeout), | 
 | 	CDC_NCM_SIMPLE_STAT(tx_reason_max_datagram), | 
 | 	CDC_NCM_SIMPLE_STAT(tx_overhead), | 
 | 	CDC_NCM_SIMPLE_STAT(tx_ntbs), | 
 | 	CDC_NCM_SIMPLE_STAT(rx_overhead), | 
 | 	CDC_NCM_SIMPLE_STAT(rx_ntbs), | 
 | }; | 
 |  | 
 | static int cdc_ncm_get_sset_count(struct net_device __always_unused *netdev, int sset) | 
 | { | 
 | 	switch (sset) { | 
 | 	case ETH_SS_STATS: | 
 | 		return ARRAY_SIZE(cdc_ncm_gstrings_stats); | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static void cdc_ncm_get_ethtool_stats(struct net_device *netdev, | 
 | 				    struct ethtool_stats __always_unused *stats, | 
 | 				    u64 *data) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(netdev); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	int i; | 
 | 	char *p = NULL; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(cdc_ncm_gstrings_stats); i++) { | 
 | 		p = (char *)ctx + cdc_ncm_gstrings_stats[i].stat_offset; | 
 | 		data[i] = (cdc_ncm_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; | 
 | 	} | 
 | } | 
 |  | 
 | static void cdc_ncm_get_strings(struct net_device __always_unused *netdev, u32 stringset, u8 *data) | 
 | { | 
 | 	u8 *p = data; | 
 | 	int i; | 
 |  | 
 | 	switch (stringset) { | 
 | 	case ETH_SS_STATS: | 
 | 		for (i = 0; i < ARRAY_SIZE(cdc_ncm_gstrings_stats); i++) { | 
 | 			memcpy(p, cdc_ncm_gstrings_stats[i].stat_string, ETH_GSTRING_LEN); | 
 | 			p += ETH_GSTRING_LEN; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx); | 
 |  | 
 | static const struct ethtool_ops cdc_ncm_ethtool_ops = { | 
 | 	.get_settings      = usbnet_get_settings, | 
 | 	.set_settings      = usbnet_set_settings, | 
 | 	.get_link          = usbnet_get_link, | 
 | 	.nway_reset        = usbnet_nway_reset, | 
 | 	.get_drvinfo       = usbnet_get_drvinfo, | 
 | 	.get_msglevel      = usbnet_get_msglevel, | 
 | 	.set_msglevel      = usbnet_set_msglevel, | 
 | 	.get_ts_info       = ethtool_op_get_ts_info, | 
 | 	.get_sset_count    = cdc_ncm_get_sset_count, | 
 | 	.get_strings       = cdc_ncm_get_strings, | 
 | 	.get_ethtool_stats = cdc_ncm_get_ethtool_stats, | 
 | }; | 
 |  | 
 | static u32 cdc_ncm_check_rx_max(struct usbnet *dev, u32 new_rx) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u32 val, max, min; | 
 |  | 
 | 	/* clamp new_rx to sane values */ | 
 | 	min = USB_CDC_NCM_NTB_MIN_IN_SIZE; | 
 | 	max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_RX, le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)); | 
 |  | 
 | 	/* dwNtbInMaxSize spec violation? Use MIN size for both limits */ | 
 | 	if (max < min) { | 
 | 		dev_warn(&dev->intf->dev, "dwNtbInMaxSize=%u is too small. Using %u\n", | 
 | 			 le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize), min); | 
 | 		max = min; | 
 | 	} | 
 |  | 
 | 	val = clamp_t(u32, new_rx, min, max); | 
 | 	if (val != new_rx) | 
 | 		dev_dbg(&dev->intf->dev, "rx_max must be in the [%u, %u] range\n", min, max); | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u32 val, max, min; | 
 |  | 
 | 	/* clamp new_tx to sane values */ | 
 | 	min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth16); | 
 | 	max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)); | 
 |  | 
 | 	/* some devices set dwNtbOutMaxSize too low for the above default */ | 
 | 	min = min(min, max); | 
 |  | 
 | 	val = clamp_t(u32, new_tx, min, max); | 
 | 	if (val != new_tx) | 
 | 		dev_dbg(&dev->intf->dev, "tx_max must be in the [%u, %u] range\n", min, max); | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_show_min_tx_pkt(struct device *d, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	return sprintf(buf, "%u\n", ctx->min_tx_pkt); | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_show_rx_max(struct device *d, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	return sprintf(buf, "%u\n", ctx->rx_max); | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_show_tx_max(struct device *d, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	return sprintf(buf, "%u\n", ctx->tx_max); | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_show_tx_timer_usecs(struct device *d, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	return sprintf(buf, "%u\n", ctx->timer_interval / (u32)NSEC_PER_USEC); | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_store_min_tx_pkt(struct device *d,  struct device_attribute *attr, const char *buf, size_t len) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	unsigned long val; | 
 |  | 
 | 	/* no need to restrict values - anything from 0 to infinity is OK */ | 
 | 	if (kstrtoul(buf, 0, &val)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ctx->min_tx_pkt = val; | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_store_rx_max(struct device *d,  struct device_attribute *attr, const char *buf, size_t len) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	unsigned long val; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &val) || cdc_ncm_check_rx_max(dev, val) != val) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cdc_ncm_update_rxtx_max(dev, val, ctx->tx_max); | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_store_tx_max(struct device *d,  struct device_attribute *attr, const char *buf, size_t len) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	unsigned long val; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &val) || cdc_ncm_check_tx_max(dev, val) != val) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cdc_ncm_update_rxtx_max(dev, ctx->rx_max, val); | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t cdc_ncm_store_tx_timer_usecs(struct device *d,  struct device_attribute *attr, const char *buf, size_t len) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	ssize_t ret; | 
 | 	unsigned long val; | 
 |  | 
 | 	ret = kstrtoul(buf, 0, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	if (val && (val < CDC_NCM_TIMER_INTERVAL_MIN || val > CDC_NCM_TIMER_INTERVAL_MAX)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_bh(&ctx->mtx); | 
 | 	ctx->timer_interval = val * NSEC_PER_USEC; | 
 | 	if (!ctx->timer_interval) | 
 | 		ctx->tx_timer_pending = 0; | 
 | 	spin_unlock_bh(&ctx->mtx); | 
 | 	return len; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(min_tx_pkt, S_IRUGO | S_IWUSR, cdc_ncm_show_min_tx_pkt, cdc_ncm_store_min_tx_pkt); | 
 | static DEVICE_ATTR(rx_max, S_IRUGO | S_IWUSR, cdc_ncm_show_rx_max, cdc_ncm_store_rx_max); | 
 | static DEVICE_ATTR(tx_max, S_IRUGO | S_IWUSR, cdc_ncm_show_tx_max, cdc_ncm_store_tx_max); | 
 | static DEVICE_ATTR(tx_timer_usecs, S_IRUGO | S_IWUSR, cdc_ncm_show_tx_timer_usecs, cdc_ncm_store_tx_timer_usecs); | 
 |  | 
 | #define NCM_PARM_ATTR(name, format, tocpu)				\ | 
 | static ssize_t cdc_ncm_show_##name(struct device *d, struct device_attribute *attr, char *buf) \ | 
 | { \ | 
 | 	struct usbnet *dev = netdev_priv(to_net_dev(d)); \ | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; \ | 
 | 	return sprintf(buf, format "\n", tocpu(ctx->ncm_parm.name));	\ | 
 | } \ | 
 | static DEVICE_ATTR(name, S_IRUGO, cdc_ncm_show_##name, NULL) | 
 |  | 
 | NCM_PARM_ATTR(bmNtbFormatsSupported, "0x%04x", le16_to_cpu); | 
 | NCM_PARM_ATTR(dwNtbInMaxSize, "%u", le32_to_cpu); | 
 | NCM_PARM_ATTR(wNdpInDivisor, "%u", le16_to_cpu); | 
 | NCM_PARM_ATTR(wNdpInPayloadRemainder, "%u", le16_to_cpu); | 
 | NCM_PARM_ATTR(wNdpInAlignment, "%u", le16_to_cpu); | 
 | NCM_PARM_ATTR(dwNtbOutMaxSize, "%u", le32_to_cpu); | 
 | NCM_PARM_ATTR(wNdpOutDivisor, "%u", le16_to_cpu); | 
 | NCM_PARM_ATTR(wNdpOutPayloadRemainder, "%u", le16_to_cpu); | 
 | NCM_PARM_ATTR(wNdpOutAlignment, "%u", le16_to_cpu); | 
 | NCM_PARM_ATTR(wNtbOutMaxDatagrams, "%u", le16_to_cpu); | 
 |  | 
 | static struct attribute *cdc_ncm_sysfs_attrs[] = { | 
 | 	&dev_attr_min_tx_pkt.attr, | 
 | 	&dev_attr_rx_max.attr, | 
 | 	&dev_attr_tx_max.attr, | 
 | 	&dev_attr_tx_timer_usecs.attr, | 
 | 	&dev_attr_bmNtbFormatsSupported.attr, | 
 | 	&dev_attr_dwNtbInMaxSize.attr, | 
 | 	&dev_attr_wNdpInDivisor.attr, | 
 | 	&dev_attr_wNdpInPayloadRemainder.attr, | 
 | 	&dev_attr_wNdpInAlignment.attr, | 
 | 	&dev_attr_dwNtbOutMaxSize.attr, | 
 | 	&dev_attr_wNdpOutDivisor.attr, | 
 | 	&dev_attr_wNdpOutPayloadRemainder.attr, | 
 | 	&dev_attr_wNdpOutAlignment.attr, | 
 | 	&dev_attr_wNtbOutMaxDatagrams.attr, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static struct attribute_group cdc_ncm_sysfs_attr_group = { | 
 | 	.name = "cdc_ncm", | 
 | 	.attrs = cdc_ncm_sysfs_attrs, | 
 | }; | 
 |  | 
 | /* handle rx_max and tx_max changes */ | 
 | static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber; | 
 | 	u32 val; | 
 |  | 
 | 	val = cdc_ncm_check_rx_max(dev, new_rx); | 
 |  | 
 | 	/* inform device about NTB input size changes */ | 
 | 	if (val != ctx->rx_max) { | 
 | 		__le32 dwNtbInMaxSize = cpu_to_le32(val); | 
 |  | 
 | 		dev_info(&dev->intf->dev, "setting rx_max = %u\n", val); | 
 |  | 
 | 		/* tell device to use new size */ | 
 | 		if (usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE, | 
 | 				     USB_TYPE_CLASS | USB_DIR_OUT | 
 | 				     | USB_RECIP_INTERFACE, | 
 | 				     0, iface_no, &dwNtbInMaxSize, 4) < 0) | 
 | 			dev_dbg(&dev->intf->dev, "Setting NTB Input Size failed\n"); | 
 | 		else | 
 | 			ctx->rx_max = val; | 
 | 	} | 
 |  | 
 | 	/* usbnet use these values for sizing rx queues */ | 
 | 	if (dev->rx_urb_size != ctx->rx_max) { | 
 | 		dev->rx_urb_size = ctx->rx_max; | 
 | 		if (netif_running(dev->net)) | 
 | 			usbnet_unlink_rx_urbs(dev); | 
 | 	} | 
 |  | 
 | 	val = cdc_ncm_check_tx_max(dev, new_tx); | 
 | 	if (val != ctx->tx_max) | 
 | 		dev_info(&dev->intf->dev, "setting tx_max = %u\n", val); | 
 |  | 
 | 	/* Adding a pad byte here if necessary simplifies the handling | 
 | 	 * in cdc_ncm_fill_tx_frame, making tx_max always represent | 
 | 	 * the real skb max size. | 
 | 	 * | 
 | 	 * We cannot use dev->maxpacket here because this is called from | 
 | 	 * .bind which is called before usbnet sets up dev->maxpacket | 
 | 	 */ | 
 | 	if (val != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) && | 
 | 	    val % usb_maxpacket(dev->udev, dev->out, 1) == 0) | 
 | 		val++; | 
 |  | 
 | 	/* we might need to flush any pending tx buffers if running */ | 
 | 	if (netif_running(dev->net) && val > ctx->tx_max) { | 
 | 		netif_tx_lock_bh(dev->net); | 
 | 		usbnet_start_xmit(NULL, dev->net); | 
 | 		/* make sure tx_curr_skb is reallocated if it was empty */ | 
 | 		if (ctx->tx_curr_skb) { | 
 | 			dev_kfree_skb_any(ctx->tx_curr_skb); | 
 | 			ctx->tx_curr_skb = NULL; | 
 | 		} | 
 | 		ctx->tx_max = val; | 
 | 		netif_tx_unlock_bh(dev->net); | 
 | 	} else { | 
 | 		ctx->tx_max = val; | 
 | 	} | 
 |  | 
 | 	dev->hard_mtu = ctx->tx_max; | 
 |  | 
 | 	/* max qlen depend on hard_mtu and rx_urb_size */ | 
 | 	usbnet_update_max_qlen(dev); | 
 |  | 
 | 	/* never pad more than 3 full USB packets per transfer */ | 
 | 	ctx->min_tx_pkt = clamp_t(u16, ctx->tx_max - 3 * usb_maxpacket(dev->udev, dev->out, 1), | 
 | 				  CDC_NCM_MIN_TX_PKT, ctx->tx_max); | 
 | } | 
 |  | 
 | /* helpers for NCM and MBIM differences */ | 
 | static u8 cdc_ncm_flags(struct usbnet *dev) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting) && ctx->mbim_desc) | 
 | 		return ctx->mbim_desc->bmNetworkCapabilities; | 
 | 	if (ctx->func_desc) | 
 | 		return ctx->func_desc->bmNetworkCapabilities; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cdc_ncm_eth_hlen(struct usbnet *dev) | 
 | { | 
 | 	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting)) | 
 | 		return 0; | 
 | 	return ETH_HLEN; | 
 | } | 
 |  | 
 | static u32 cdc_ncm_min_dgram_size(struct usbnet *dev) | 
 | { | 
 | 	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting)) | 
 | 		return CDC_MBIM_MIN_DATAGRAM_SIZE; | 
 | 	return CDC_NCM_MIN_DATAGRAM_SIZE; | 
 | } | 
 |  | 
 | static u32 cdc_ncm_max_dgram_size(struct usbnet *dev) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting) && ctx->mbim_desc) | 
 | 		return le16_to_cpu(ctx->mbim_desc->wMaxSegmentSize); | 
 | 	if (ctx->ether_desc) | 
 | 		return le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); | 
 | 	return CDC_NCM_MAX_DATAGRAM_SIZE; | 
 | } | 
 |  | 
 | /* initial one-time device setup.  MUST be called with the data interface | 
 |  * in altsetting 0 | 
 |  */ | 
 | static int cdc_ncm_init(struct usbnet *dev) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber; | 
 | 	int err; | 
 |  | 
 | 	err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS, | 
 | 			      USB_TYPE_CLASS | USB_DIR_IN | 
 | 			      |USB_RECIP_INTERFACE, | 
 | 			      0, iface_no, &ctx->ncm_parm, | 
 | 			      sizeof(ctx->ncm_parm)); | 
 | 	if (err < 0) { | 
 | 		dev_err(&dev->intf->dev, "failed GET_NTB_PARAMETERS\n"); | 
 | 		return err; /* GET_NTB_PARAMETERS is required */ | 
 | 	} | 
 |  | 
 | 	/* set CRC Mode */ | 
 | 	if (cdc_ncm_flags(dev) & USB_CDC_NCM_NCAP_CRC_MODE) { | 
 | 		dev_dbg(&dev->intf->dev, "Setting CRC mode off\n"); | 
 | 		err = usbnet_write_cmd(dev, USB_CDC_SET_CRC_MODE, | 
 | 				       USB_TYPE_CLASS | USB_DIR_OUT | 
 | 				       | USB_RECIP_INTERFACE, | 
 | 				       USB_CDC_NCM_CRC_NOT_APPENDED, | 
 | 				       iface_no, NULL, 0); | 
 | 		if (err < 0) | 
 | 			dev_err(&dev->intf->dev, "SET_CRC_MODE failed\n"); | 
 | 	} | 
 |  | 
 | 	/* set NTB format, if both formats are supported. | 
 | 	 * | 
 | 	 * "The host shall only send this command while the NCM Data | 
 | 	 *  Interface is in alternate setting 0." | 
 | 	 */ | 
 | 	if (le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported) & | 
 | 						USB_CDC_NCM_NTB32_SUPPORTED) { | 
 | 		dev_dbg(&dev->intf->dev, "Setting NTB format to 16-bit\n"); | 
 | 		err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT, | 
 | 				       USB_TYPE_CLASS | USB_DIR_OUT | 
 | 				       | USB_RECIP_INTERFACE, | 
 | 				       USB_CDC_NCM_NTB16_FORMAT, | 
 | 				       iface_no, NULL, 0); | 
 | 		if (err < 0) | 
 | 			dev_err(&dev->intf->dev, "SET_NTB_FORMAT failed\n"); | 
 | 	} | 
 |  | 
 | 	/* set initial device values */ | 
 | 	ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize); | 
 | 	ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize); | 
 | 	ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder); | 
 | 	ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor); | 
 | 	ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment); | 
 | 	/* devices prior to NCM Errata shall set this field to zero */ | 
 | 	ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams); | 
 |  | 
 | 	dev_dbg(&dev->intf->dev, | 
 | 		"dwNtbInMaxSize=%u dwNtbOutMaxSize=%u wNdpOutPayloadRemainder=%u wNdpOutDivisor=%u wNdpOutAlignment=%u wNtbOutMaxDatagrams=%u flags=0x%x\n", | 
 | 		ctx->rx_max, ctx->tx_max, ctx->tx_remainder, ctx->tx_modulus, | 
 | 		ctx->tx_ndp_modulus, ctx->tx_max_datagrams, cdc_ncm_flags(dev)); | 
 |  | 
 | 	/* max count of tx datagrams */ | 
 | 	if ((ctx->tx_max_datagrams == 0) || | 
 | 			(ctx->tx_max_datagrams > CDC_NCM_DPT_DATAGRAMS_MAX)) | 
 | 		ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX; | 
 |  | 
 | 	/* set up maximum NDP size */ | 
 | 	ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp16) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe16); | 
 |  | 
 | 	/* initial coalescing timer interval */ | 
 | 	ctx->timer_interval = CDC_NCM_TIMER_INTERVAL_USEC * NSEC_PER_USEC; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* set a new max datagram size */ | 
 | static void cdc_ncm_set_dgram_size(struct usbnet *dev, int new_size) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber; | 
 | 	__le16 max_datagram_size; | 
 | 	u16 mbim_mtu; | 
 | 	int err; | 
 |  | 
 | 	/* set default based on descriptors */ | 
 | 	ctx->max_datagram_size = clamp_t(u32, new_size, | 
 | 					 cdc_ncm_min_dgram_size(dev), | 
 | 					 CDC_NCM_MAX_DATAGRAM_SIZE); | 
 |  | 
 | 	/* inform the device about the selected Max Datagram Size? */ | 
 | 	if (!(cdc_ncm_flags(dev) & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE)) | 
 | 		goto out; | 
 |  | 
 | 	/* read current mtu value from device */ | 
 | 	err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE, | 
 | 			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, | 
 | 			      0, iface_no, &max_datagram_size, 2); | 
 | 	if (err < 0) { | 
 | 		dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n"); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (le16_to_cpu(max_datagram_size) == ctx->max_datagram_size) | 
 | 		goto out; | 
 |  | 
 | 	max_datagram_size = cpu_to_le16(ctx->max_datagram_size); | 
 | 	err = usbnet_write_cmd(dev, USB_CDC_SET_MAX_DATAGRAM_SIZE, | 
 | 			       USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, | 
 | 			       0, iface_no, &max_datagram_size, 2); | 
 | 	if (err < 0) | 
 | 		dev_dbg(&dev->intf->dev, "SET_MAX_DATAGRAM_SIZE failed\n"); | 
 |  | 
 | out: | 
 | 	/* set MTU to max supported by the device if necessary */ | 
 | 	dev->net->mtu = min_t(int, dev->net->mtu, ctx->max_datagram_size - cdc_ncm_eth_hlen(dev)); | 
 |  | 
 | 	/* do not exceed operater preferred MTU */ | 
 | 	if (ctx->mbim_extended_desc) { | 
 | 		mbim_mtu = le16_to_cpu(ctx->mbim_extended_desc->wMTU); | 
 | 		if (mbim_mtu != 0 && mbim_mtu < dev->net->mtu) | 
 | 			dev->net->mtu = mbim_mtu; | 
 | 	} | 
 | } | 
 |  | 
 | static void cdc_ncm_fix_modulus(struct usbnet *dev) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u32 val; | 
 |  | 
 | 	/* | 
 | 	 * verify that the structure alignment is: | 
 | 	 * - power of two | 
 | 	 * - not greater than the maximum transmit length | 
 | 	 * - not less than four bytes | 
 | 	 */ | 
 | 	val = ctx->tx_ndp_modulus; | 
 |  | 
 | 	if ((val < USB_CDC_NCM_NDP_ALIGN_MIN_SIZE) || | 
 | 	    (val != ((-val) & val)) || (val >= ctx->tx_max)) { | 
 | 		dev_dbg(&dev->intf->dev, "Using default alignment: 4 bytes\n"); | 
 | 		ctx->tx_ndp_modulus = USB_CDC_NCM_NDP_ALIGN_MIN_SIZE; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * verify that the payload alignment is: | 
 | 	 * - power of two | 
 | 	 * - not greater than the maximum transmit length | 
 | 	 * - not less than four bytes | 
 | 	 */ | 
 | 	val = ctx->tx_modulus; | 
 |  | 
 | 	if ((val < USB_CDC_NCM_NDP_ALIGN_MIN_SIZE) || | 
 | 	    (val != ((-val) & val)) || (val >= ctx->tx_max)) { | 
 | 		dev_dbg(&dev->intf->dev, "Using default transmit modulus: 4 bytes\n"); | 
 | 		ctx->tx_modulus = USB_CDC_NCM_NDP_ALIGN_MIN_SIZE; | 
 | 	} | 
 |  | 
 | 	/* verify the payload remainder */ | 
 | 	if (ctx->tx_remainder >= ctx->tx_modulus) { | 
 | 		dev_dbg(&dev->intf->dev, "Using default transmit remainder: 0 bytes\n"); | 
 | 		ctx->tx_remainder = 0; | 
 | 	} | 
 |  | 
 | 	/* adjust TX-remainder according to NCM specification. */ | 
 | 	ctx->tx_remainder = ((ctx->tx_remainder - cdc_ncm_eth_hlen(dev)) & | 
 | 			     (ctx->tx_modulus - 1)); | 
 | } | 
 |  | 
 | static int cdc_ncm_setup(struct usbnet *dev) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	u32 def_rx, def_tx; | 
 |  | 
 | 	/* be conservative when selecting intial buffer size to | 
 | 	 * increase the number of hosts this will work for | 
 | 	 */ | 
 | 	def_rx = min_t(u32, CDC_NCM_NTB_DEF_SIZE_RX, | 
 | 		       le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)); | 
 | 	def_tx = min_t(u32, CDC_NCM_NTB_DEF_SIZE_TX, | 
 | 		       le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)); | 
 |  | 
 | 	/* clamp rx_max and tx_max and inform device */ | 
 | 	cdc_ncm_update_rxtx_max(dev, def_rx, def_tx); | 
 |  | 
 | 	/* sanitize the modulus and remainder values */ | 
 | 	cdc_ncm_fix_modulus(dev); | 
 |  | 
 | 	/* set max datagram size */ | 
 | 	cdc_ncm_set_dgram_size(dev, cdc_ncm_max_dgram_size(dev)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | cdc_ncm_find_endpoints(struct usbnet *dev, struct usb_interface *intf) | 
 | { | 
 | 	struct usb_host_endpoint *e, *in = NULL, *out = NULL; | 
 | 	u8 ep; | 
 |  | 
 | 	for (ep = 0; ep < intf->cur_altsetting->desc.bNumEndpoints; ep++) { | 
 |  | 
 | 		e = intf->cur_altsetting->endpoint + ep; | 
 | 		switch (e->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { | 
 | 		case USB_ENDPOINT_XFER_INT: | 
 | 			if (usb_endpoint_dir_in(&e->desc)) { | 
 | 				if (!dev->status) | 
 | 					dev->status = e; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case USB_ENDPOINT_XFER_BULK: | 
 | 			if (usb_endpoint_dir_in(&e->desc)) { | 
 | 				if (!in) | 
 | 					in = e; | 
 | 			} else { | 
 | 				if (!out) | 
 | 					out = e; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (in && !dev->in) | 
 | 		dev->in = usb_rcvbulkpipe(dev->udev, | 
 | 					  in->desc.bEndpointAddress & | 
 | 					  USB_ENDPOINT_NUMBER_MASK); | 
 | 	if (out && !dev->out) | 
 | 		dev->out = usb_sndbulkpipe(dev->udev, | 
 | 					   out->desc.bEndpointAddress & | 
 | 					   USB_ENDPOINT_NUMBER_MASK); | 
 | } | 
 |  | 
 | static void cdc_ncm_free(struct cdc_ncm_ctx *ctx) | 
 | { | 
 | 	if (ctx == NULL) | 
 | 		return; | 
 |  | 
 | 	if (ctx->tx_rem_skb != NULL) { | 
 | 		dev_kfree_skb_any(ctx->tx_rem_skb); | 
 | 		ctx->tx_rem_skb = NULL; | 
 | 	} | 
 |  | 
 | 	if (ctx->tx_curr_skb != NULL) { | 
 | 		dev_kfree_skb_any(ctx->tx_curr_skb); | 
 | 		ctx->tx_curr_skb = NULL; | 
 | 	} | 
 |  | 
 | 	kfree(ctx->delayed_ndp16); | 
 |  | 
 | 	kfree(ctx); | 
 | } | 
 |  | 
 | int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags) | 
 | { | 
 | 	const struct usb_cdc_union_desc *union_desc = NULL; | 
 | 	struct cdc_ncm_ctx *ctx; | 
 | 	struct usb_driver *driver; | 
 | 	u8 *buf; | 
 | 	int len; | 
 | 	int temp; | 
 | 	u8 iface_no; | 
 | 	struct usb_cdc_parsed_header hdr; | 
 |  | 
 | 	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); | 
 | 	if (!ctx) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	hrtimer_init(&ctx->tx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
 | 	ctx->tx_timer.function = &cdc_ncm_tx_timer_cb; | 
 | 	ctx->bh.data = (unsigned long)dev; | 
 | 	ctx->bh.func = cdc_ncm_txpath_bh; | 
 | 	atomic_set(&ctx->stop, 0); | 
 | 	spin_lock_init(&ctx->mtx); | 
 |  | 
 | 	/* store ctx pointer in device data field */ | 
 | 	dev->data[0] = (unsigned long)ctx; | 
 |  | 
 | 	/* only the control interface can be successfully probed */ | 
 | 	ctx->control = intf; | 
 |  | 
 | 	/* get some pointers */ | 
 | 	driver = driver_of(intf); | 
 | 	buf = intf->cur_altsetting->extra; | 
 | 	len = intf->cur_altsetting->extralen; | 
 |  | 
 | 	/* parse through descriptors associated with control interface */ | 
 | 	cdc_parse_cdc_header(&hdr, intf, buf, len); | 
 |  | 
 | 	ctx->data = usb_ifnum_to_if(dev->udev, | 
 | 				    hdr.usb_cdc_union_desc->bSlaveInterface0); | 
 | 	ctx->ether_desc = hdr.usb_cdc_ether_desc; | 
 | 	ctx->func_desc = hdr.usb_cdc_ncm_desc; | 
 | 	ctx->mbim_desc = hdr.usb_cdc_mbim_desc; | 
 | 	ctx->mbim_extended_desc = hdr.usb_cdc_mbim_extended_desc; | 
 |  | 
 | 	/* some buggy devices have an IAD but no CDC Union */ | 
 | 	if (!union_desc && intf->intf_assoc && intf->intf_assoc->bInterfaceCount == 2) { | 
 | 		ctx->data = usb_ifnum_to_if(dev->udev, intf->cur_altsetting->desc.bInterfaceNumber + 1); | 
 | 		dev_dbg(&intf->dev, "CDC Union missing - got slave from IAD\n"); | 
 | 	} | 
 |  | 
 | 	/* check if we got everything */ | 
 | 	if (!ctx->data) { | 
 | 		dev_dbg(&intf->dev, "CDC Union missing and no IAD found\n"); | 
 | 		goto error; | 
 | 	} | 
 | 	if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) { | 
 | 		if (!ctx->mbim_desc) { | 
 | 			dev_dbg(&intf->dev, "MBIM functional descriptor missing\n"); | 
 | 			goto error; | 
 | 		} | 
 | 	} else { | 
 | 		if (!ctx->ether_desc || !ctx->func_desc) { | 
 | 			dev_dbg(&intf->dev, "NCM or ECM functional descriptors missing\n"); | 
 | 			goto error; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* claim data interface, if different from control */ | 
 | 	if (ctx->data != ctx->control) { | 
 | 		temp = usb_driver_claim_interface(driver, ctx->data, dev); | 
 | 		if (temp) { | 
 | 			dev_dbg(&intf->dev, "failed to claim data intf\n"); | 
 | 			goto error; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber; | 
 |  | 
 | 	/* reset data interface */ | 
 | 	temp = usb_set_interface(dev->udev, iface_no, 0); | 
 | 	if (temp) { | 
 | 		dev_dbg(&intf->dev, "set interface failed\n"); | 
 | 		goto error2; | 
 | 	} | 
 |  | 
 | 	/* initialize basic device settings */ | 
 | 	if (cdc_ncm_init(dev)) | 
 | 		goto error2; | 
 |  | 
 | 	/* configure data interface */ | 
 | 	temp = usb_set_interface(dev->udev, iface_no, data_altsetting); | 
 | 	if (temp) { | 
 | 		dev_dbg(&intf->dev, "set interface failed\n"); | 
 | 		goto error2; | 
 | 	} | 
 |  | 
 | 	cdc_ncm_find_endpoints(dev, ctx->data); | 
 | 	cdc_ncm_find_endpoints(dev, ctx->control); | 
 | 	if (!dev->in || !dev->out || !dev->status) { | 
 | 		dev_dbg(&intf->dev, "failed to collect endpoints\n"); | 
 | 		goto error2; | 
 | 	} | 
 |  | 
 | 	usb_set_intfdata(ctx->data, dev); | 
 | 	usb_set_intfdata(ctx->control, dev); | 
 |  | 
 | 	if (ctx->ether_desc) { | 
 | 		temp = usbnet_get_ethernet_addr(dev, ctx->ether_desc->iMACAddress); | 
 | 		if (temp) { | 
 | 			dev_dbg(&intf->dev, "failed to get mac address\n"); | 
 | 			goto error2; | 
 | 		} | 
 | 		dev_info(&intf->dev, "MAC-Address: %pM\n", dev->net->dev_addr); | 
 | 	} | 
 |  | 
 | 	/* finish setting up the device specific data */ | 
 | 	cdc_ncm_setup(dev); | 
 |  | 
 | 	/* Device-specific flags */ | 
 | 	ctx->drvflags = drvflags; | 
 |  | 
 | 	/* Allocate the delayed NDP if needed. */ | 
 | 	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) { | 
 | 		ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL); | 
 | 		if (!ctx->delayed_ndp16) | 
 | 			goto error2; | 
 | 		dev_info(&intf->dev, "NDP will be placed at end of frame for this device."); | 
 | 	} | 
 |  | 
 | 	/* override ethtool_ops */ | 
 | 	dev->net->ethtool_ops = &cdc_ncm_ethtool_ops; | 
 |  | 
 | 	/* add our sysfs attrs */ | 
 | 	dev->net->sysfs_groups[0] = &cdc_ncm_sysfs_attr_group; | 
 |  | 
 | 	return 0; | 
 |  | 
 | error2: | 
 | 	usb_set_intfdata(ctx->control, NULL); | 
 | 	usb_set_intfdata(ctx->data, NULL); | 
 | 	if (ctx->data != ctx->control) | 
 | 		usb_driver_release_interface(driver, ctx->data); | 
 | error: | 
 | 	cdc_ncm_free((struct cdc_ncm_ctx *)dev->data[0]); | 
 | 	dev->data[0] = 0; | 
 | 	dev_info(&intf->dev, "bind() failure\n"); | 
 | 	return -ENODEV; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_bind_common); | 
 |  | 
 | void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	struct usb_driver *driver = driver_of(intf); | 
 |  | 
 | 	if (ctx == NULL) | 
 | 		return;		/* no setup */ | 
 |  | 
 | 	atomic_set(&ctx->stop, 1); | 
 |  | 
 | 	if (hrtimer_active(&ctx->tx_timer)) | 
 | 		hrtimer_cancel(&ctx->tx_timer); | 
 |  | 
 | 	tasklet_kill(&ctx->bh); | 
 |  | 
 | 	/* handle devices with combined control and data interface */ | 
 | 	if (ctx->control == ctx->data) | 
 | 		ctx->data = NULL; | 
 |  | 
 | 	/* disconnect master --> disconnect slave */ | 
 | 	if (intf == ctx->control && ctx->data) { | 
 | 		usb_set_intfdata(ctx->data, NULL); | 
 | 		usb_driver_release_interface(driver, ctx->data); | 
 | 		ctx->data = NULL; | 
 |  | 
 | 	} else if (intf == ctx->data && ctx->control) { | 
 | 		usb_set_intfdata(ctx->control, NULL); | 
 | 		usb_driver_release_interface(driver, ctx->control); | 
 | 		ctx->control = NULL; | 
 | 	} | 
 |  | 
 | 	usb_set_intfdata(intf, NULL); | 
 | 	cdc_ncm_free(ctx); | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_unbind); | 
 |  | 
 | /* Return the number of the MBIM control interface altsetting iff it | 
 |  * is preferred and available, | 
 |  */ | 
 | u8 cdc_ncm_select_altsetting(struct usb_interface *intf) | 
 | { | 
 | 	struct usb_host_interface *alt; | 
 |  | 
 | 	/* The MBIM spec defines a NCM compatible default altsetting, | 
 | 	 * which we may have matched: | 
 | 	 * | 
 | 	 *  "Functions that implement both NCM 1.0 and MBIM (an | 
 | 	 *   “NCM/MBIM function”) according to this recommendation | 
 | 	 *   shall provide two alternate settings for the | 
 | 	 *   Communication Interface.  Alternate setting 0, and the | 
 | 	 *   associated class and endpoint descriptors, shall be | 
 | 	 *   constructed according to the rules given for the | 
 | 	 *   Communication Interface in section 5 of [USBNCM10]. | 
 | 	 *   Alternate setting 1, and the associated class and | 
 | 	 *   endpoint descriptors, shall be constructed according to | 
 | 	 *   the rules given in section 6 (USB Device Model) of this | 
 | 	 *   specification." | 
 | 	 */ | 
 | 	if (intf->num_altsetting < 2) | 
 | 		return intf->cur_altsetting->desc.bAlternateSetting; | 
 |  | 
 | 	if (prefer_mbim) { | 
 | 		alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM); | 
 | 		if (alt && cdc_ncm_comm_intf_is_mbim(alt)) | 
 | 			return CDC_NCM_COMM_ALTSETTING_MBIM; | 
 | 	} | 
 | 	return CDC_NCM_COMM_ALTSETTING_NCM; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting); | 
 |  | 
 | static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	/* MBIM backwards compatible function? */ | 
 | 	if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* The NCM data altsetting is fixed, so we hard-coded it. | 
 | 	 * Additionally, generic NCM devices are assumed to accept arbitrarily | 
 | 	 * placed NDP. | 
 | 	 */ | 
 | 	ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0); | 
 |  | 
 | 	/* | 
 | 	 * We should get an event when network connection is "connected" or | 
 | 	 * "disconnected". Set network connection in "disconnected" state | 
 | 	 * (carrier is OFF) during attach, so the IP network stack does not | 
 | 	 * start IPv6 negotiation and more. | 
 | 	 */ | 
 | 	usbnet_link_change(dev, 0, 0); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void cdc_ncm_align_tail(struct sk_buff *skb, size_t modulus, size_t remainder, size_t max) | 
 | { | 
 | 	size_t align = ALIGN(skb->len, modulus) - skb->len + remainder; | 
 |  | 
 | 	if (skb->len + align > max) | 
 | 		align = max - skb->len; | 
 | 	if (align && skb_tailroom(skb) >= align) | 
 | 		memset(skb_put(skb, align), 0, align); | 
 | } | 
 |  | 
 | /* return a pointer to a valid struct usb_cdc_ncm_ndp16 of type sign, possibly | 
 |  * allocating a new one within skb | 
 |  */ | 
 | static struct usb_cdc_ncm_ndp16 *cdc_ncm_ndp(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign, size_t reserve) | 
 | { | 
 | 	struct usb_cdc_ncm_ndp16 *ndp16 = NULL; | 
 | 	struct usb_cdc_ncm_nth16 *nth16 = (void *)skb->data; | 
 | 	size_t ndpoffset = le16_to_cpu(nth16->wNdpIndex); | 
 |  | 
 | 	/* If NDP should be moved to the end of the NCM package, we can't follow the | 
 | 	* NTH16 header as we would normally do. NDP isn't written to the SKB yet, and | 
 | 	* the wNdpIndex field in the header is actually not consistent with reality. It will be later. | 
 | 	*/ | 
 | 	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) | 
 | 		if (ctx->delayed_ndp16->dwSignature == sign) | 
 | 			return ctx->delayed_ndp16; | 
 |  | 
 | 	/* follow the chain of NDPs, looking for a match */ | 
 | 	while (ndpoffset) { | 
 | 		ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb->data + ndpoffset); | 
 | 		if  (ndp16->dwSignature == sign) | 
 | 			return ndp16; | 
 | 		ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex); | 
 | 	} | 
 |  | 
 | 	/* align new NDP */ | 
 | 	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)) | 
 | 		cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max); | 
 |  | 
 | 	/* verify that there is room for the NDP and the datagram (reserve) */ | 
 | 	if ((ctx->tx_max - skb->len - reserve) < ctx->max_ndp_size) | 
 | 		return NULL; | 
 |  | 
 | 	/* link to it */ | 
 | 	if (ndp16) | 
 | 		ndp16->wNextNdpIndex = cpu_to_le16(skb->len); | 
 | 	else | 
 | 		nth16->wNdpIndex = cpu_to_le16(skb->len); | 
 |  | 
 | 	/* push a new empty NDP */ | 
 | 	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)) | 
 | 		ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size); | 
 | 	else | 
 | 		ndp16 = ctx->delayed_ndp16; | 
 |  | 
 | 	ndp16->dwSignature = sign; | 
 | 	ndp16->wLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_ndp16) + sizeof(struct usb_cdc_ncm_dpe16)); | 
 | 	return ndp16; | 
 | } | 
 |  | 
 | struct sk_buff * | 
 | cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	struct usb_cdc_ncm_nth16 *nth16; | 
 | 	struct usb_cdc_ncm_ndp16 *ndp16; | 
 | 	struct sk_buff *skb_out; | 
 | 	u16 n = 0, index, ndplen; | 
 | 	u8 ready2send = 0; | 
 | 	u32 delayed_ndp_size; | 
 |  | 
 | 	/* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated | 
 | 	 * accordingly. Otherwise, we should check here. | 
 | 	 */ | 
 | 	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) | 
 | 		delayed_ndp_size = ctx->max_ndp_size; | 
 | 	else | 
 | 		delayed_ndp_size = 0; | 
 |  | 
 | 	/* if there is a remaining skb, it gets priority */ | 
 | 	if (skb != NULL) { | 
 | 		swap(skb, ctx->tx_rem_skb); | 
 | 		swap(sign, ctx->tx_rem_sign); | 
 | 	} else { | 
 | 		ready2send = 1; | 
 | 	} | 
 |  | 
 | 	/* check if we are resuming an OUT skb */ | 
 | 	skb_out = ctx->tx_curr_skb; | 
 |  | 
 | 	/* allocate a new OUT skb */ | 
 | 	if (!skb_out) { | 
 | 		skb_out = alloc_skb(ctx->tx_max, GFP_ATOMIC); | 
 | 		if (skb_out == NULL) { | 
 | 			if (skb != NULL) { | 
 | 				dev_kfree_skb_any(skb); | 
 | 				dev->net->stats.tx_dropped++; | 
 | 			} | 
 | 			goto exit_no_skb; | 
 | 		} | 
 | 		/* fill out the initial 16-bit NTB header */ | 
 | 		nth16 = (struct usb_cdc_ncm_nth16 *)memset(skb_put(skb_out, sizeof(struct usb_cdc_ncm_nth16)), 0, sizeof(struct usb_cdc_ncm_nth16)); | 
 | 		nth16->dwSignature = cpu_to_le32(USB_CDC_NCM_NTH16_SIGN); | 
 | 		nth16->wHeaderLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_nth16)); | 
 | 		nth16->wSequence = cpu_to_le16(ctx->tx_seq++); | 
 |  | 
 | 		/* count total number of frames in this NTB */ | 
 | 		ctx->tx_curr_frame_num = 0; | 
 |  | 
 | 		/* recent payload counter for this skb_out */ | 
 | 		ctx->tx_curr_frame_payload = 0; | 
 | 	} | 
 |  | 
 | 	for (n = ctx->tx_curr_frame_num; n < ctx->tx_max_datagrams; n++) { | 
 | 		/* send any remaining skb first */ | 
 | 		if (skb == NULL) { | 
 | 			skb = ctx->tx_rem_skb; | 
 | 			sign = ctx->tx_rem_sign; | 
 | 			ctx->tx_rem_skb = NULL; | 
 |  | 
 | 			/* check for end of skb */ | 
 | 			if (skb == NULL) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		/* get the appropriate NDP for this skb */ | 
 | 		ndp16 = cdc_ncm_ndp(ctx, skb_out, sign, skb->len + ctx->tx_modulus + ctx->tx_remainder); | 
 |  | 
 | 		/* align beginning of next frame */ | 
 | 		cdc_ncm_align_tail(skb_out,  ctx->tx_modulus, ctx->tx_remainder, ctx->tx_max); | 
 |  | 
 | 		/* check if we had enough room left for both NDP and frame */ | 
 | 		if (!ndp16 || skb_out->len + skb->len + delayed_ndp_size > ctx->tx_max) { | 
 | 			if (n == 0) { | 
 | 				/* won't fit, MTU problem? */ | 
 | 				dev_kfree_skb_any(skb); | 
 | 				skb = NULL; | 
 | 				dev->net->stats.tx_dropped++; | 
 | 			} else { | 
 | 				/* no room for skb - store for later */ | 
 | 				if (ctx->tx_rem_skb != NULL) { | 
 | 					dev_kfree_skb_any(ctx->tx_rem_skb); | 
 | 					dev->net->stats.tx_dropped++; | 
 | 				} | 
 | 				ctx->tx_rem_skb = skb; | 
 | 				ctx->tx_rem_sign = sign; | 
 | 				skb = NULL; | 
 | 				ready2send = 1; | 
 | 				ctx->tx_reason_ntb_full++;	/* count reason for transmitting */ | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* calculate frame number withing this NDP */ | 
 | 		ndplen = le16_to_cpu(ndp16->wLength); | 
 | 		index = (ndplen - sizeof(struct usb_cdc_ncm_ndp16)) / sizeof(struct usb_cdc_ncm_dpe16) - 1; | 
 |  | 
 | 		/* OK, add this skb */ | 
 | 		ndp16->dpe16[index].wDatagramLength = cpu_to_le16(skb->len); | 
 | 		ndp16->dpe16[index].wDatagramIndex = cpu_to_le16(skb_out->len); | 
 | 		ndp16->wLength = cpu_to_le16(ndplen + sizeof(struct usb_cdc_ncm_dpe16)); | 
 | 		memcpy(skb_put(skb_out, skb->len), skb->data, skb->len); | 
 | 		ctx->tx_curr_frame_payload += skb->len;	/* count real tx payload data */ | 
 | 		dev_kfree_skb_any(skb); | 
 | 		skb = NULL; | 
 |  | 
 | 		/* send now if this NDP is full */ | 
 | 		if (index >= CDC_NCM_DPT_DATAGRAMS_MAX) { | 
 | 			ready2send = 1; | 
 | 			ctx->tx_reason_ndp_full++;	/* count reason for transmitting */ | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* free up any dangling skb */ | 
 | 	if (skb != NULL) { | 
 | 		dev_kfree_skb_any(skb); | 
 | 		skb = NULL; | 
 | 		dev->net->stats.tx_dropped++; | 
 | 	} | 
 |  | 
 | 	ctx->tx_curr_frame_num = n; | 
 |  | 
 | 	if (n == 0) { | 
 | 		/* wait for more frames */ | 
 | 		/* push variables */ | 
 | 		ctx->tx_curr_skb = skb_out; | 
 | 		goto exit_no_skb; | 
 |  | 
 | 	} else if ((n < ctx->tx_max_datagrams) && (ready2send == 0) && (ctx->timer_interval > 0)) { | 
 | 		/* wait for more frames */ | 
 | 		/* push variables */ | 
 | 		ctx->tx_curr_skb = skb_out; | 
 | 		/* set the pending count */ | 
 | 		if (n < CDC_NCM_RESTART_TIMER_DATAGRAM_CNT) | 
 | 			ctx->tx_timer_pending = CDC_NCM_TIMER_PENDING_CNT; | 
 | 		goto exit_no_skb; | 
 |  | 
 | 	} else { | 
 | 		if (n == ctx->tx_max_datagrams) | 
 | 			ctx->tx_reason_max_datagram++;	/* count reason for transmitting */ | 
 | 		/* frame goes out */ | 
 | 		/* variables will be reset at next call */ | 
 | 	} | 
 |  | 
 | 	/* If requested, put NDP at end of frame. */ | 
 | 	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) { | 
 | 		nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data; | 
 | 		cdc_ncm_align_tail(skb_out, ctx->tx_ndp_modulus, 0, ctx->tx_max); | 
 | 		nth16->wNdpIndex = cpu_to_le16(skb_out->len); | 
 | 		memcpy(skb_put(skb_out, ctx->max_ndp_size), ctx->delayed_ndp16, ctx->max_ndp_size); | 
 |  | 
 | 		/* Zero out delayed NDP - signature checking will naturally fail. */ | 
 | 		ndp16 = memset(ctx->delayed_ndp16, 0, ctx->max_ndp_size); | 
 | 	} | 
 |  | 
 | 	/* If collected data size is less or equal ctx->min_tx_pkt | 
 | 	 * bytes, we send buffers as it is. If we get more data, it | 
 | 	 * would be more efficient for USB HS mobile device with DMA | 
 | 	 * engine to receive a full size NTB, than canceling DMA | 
 | 	 * transfer and receiving a short packet. | 
 | 	 * | 
 | 	 * This optimization support is pointless if we end up sending | 
 | 	 * a ZLP after full sized NTBs. | 
 | 	 */ | 
 | 	if (!(dev->driver_info->flags & FLAG_SEND_ZLP) && | 
 | 	    skb_out->len > ctx->min_tx_pkt) | 
 | 		memset(skb_put(skb_out, ctx->tx_max - skb_out->len), 0, | 
 | 		       ctx->tx_max - skb_out->len); | 
 | 	else if (skb_out->len < ctx->tx_max && (skb_out->len % dev->maxpacket) == 0) | 
 | 		*skb_put(skb_out, 1) = 0;	/* force short packet */ | 
 |  | 
 | 	/* set final frame length */ | 
 | 	nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data; | 
 | 	nth16->wBlockLength = cpu_to_le16(skb_out->len); | 
 |  | 
 | 	/* return skb */ | 
 | 	ctx->tx_curr_skb = NULL; | 
 |  | 
 | 	/* keep private stats: framing overhead and number of NTBs */ | 
 | 	ctx->tx_overhead += skb_out->len - ctx->tx_curr_frame_payload; | 
 | 	ctx->tx_ntbs++; | 
 |  | 
 | 	/* usbnet will count all the framing overhead by default. | 
 | 	 * Adjust the stats so that the tx_bytes counter show real | 
 | 	 * payload data instead. | 
 | 	 */ | 
 | 	usbnet_set_skb_tx_stats(skb_out, n, | 
 | 				(long)ctx->tx_curr_frame_payload - skb_out->len); | 
 |  | 
 | 	return skb_out; | 
 |  | 
 | exit_no_skb: | 
 | 	/* Start timer, if there is a remaining non-empty skb */ | 
 | 	if (ctx->tx_curr_skb != NULL && n > 0) | 
 | 		cdc_ncm_tx_timeout_start(ctx); | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_fill_tx_frame); | 
 |  | 
 | static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx) | 
 | { | 
 | 	/* start timer, if not already started */ | 
 | 	if (!(hrtimer_active(&ctx->tx_timer) || atomic_read(&ctx->stop))) | 
 | 		hrtimer_start(&ctx->tx_timer, | 
 | 				ktime_set(0, ctx->timer_interval), | 
 | 				HRTIMER_MODE_REL); | 
 | } | 
 |  | 
 | static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *timer) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx = | 
 | 			container_of(timer, struct cdc_ncm_ctx, tx_timer); | 
 |  | 
 | 	if (!atomic_read(&ctx->stop)) | 
 | 		tasklet_schedule(&ctx->bh); | 
 | 	return HRTIMER_NORESTART; | 
 | } | 
 |  | 
 | static void cdc_ncm_txpath_bh(unsigned long param) | 
 | { | 
 | 	struct usbnet *dev = (struct usbnet *)param; | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	spin_lock_bh(&ctx->mtx); | 
 | 	if (ctx->tx_timer_pending != 0) { | 
 | 		ctx->tx_timer_pending--; | 
 | 		cdc_ncm_tx_timeout_start(ctx); | 
 | 		spin_unlock_bh(&ctx->mtx); | 
 | 	} else if (dev->net != NULL) { | 
 | 		ctx->tx_reason_timeout++;	/* count reason for transmitting */ | 
 | 		spin_unlock_bh(&ctx->mtx); | 
 | 		netif_tx_lock_bh(dev->net); | 
 | 		usbnet_start_xmit(NULL, dev->net); | 
 | 		netif_tx_unlock_bh(dev->net); | 
 | 	} else { | 
 | 		spin_unlock_bh(&ctx->mtx); | 
 | 	} | 
 | } | 
 |  | 
 | struct sk_buff * | 
 | cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) | 
 | { | 
 | 	struct sk_buff *skb_out; | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	/* | 
 | 	 * The Ethernet API we are using does not support transmitting | 
 | 	 * multiple Ethernet frames in a single call. This driver will | 
 | 	 * accumulate multiple Ethernet frames and send out a larger | 
 | 	 * USB frame when the USB buffer is full or when a single jiffies | 
 | 	 * timeout happens. | 
 | 	 */ | 
 | 	if (ctx == NULL) | 
 | 		goto error; | 
 |  | 
 | 	spin_lock_bh(&ctx->mtx); | 
 | 	skb_out = cdc_ncm_fill_tx_frame(dev, skb, cpu_to_le32(USB_CDC_NCM_NDP16_NOCRC_SIGN)); | 
 | 	spin_unlock_bh(&ctx->mtx); | 
 | 	return skb_out; | 
 |  | 
 | error: | 
 | 	if (skb != NULL) | 
 | 		dev_kfree_skb_any(skb); | 
 |  | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_tx_fixup); | 
 |  | 
 | /* verify NTB header and return offset of first NDP, or negative error */ | 
 | int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(skb_in->dev); | 
 | 	struct usb_cdc_ncm_nth16 *nth16; | 
 | 	int len; | 
 | 	int ret = -EINVAL; | 
 |  | 
 | 	if (ctx == NULL) | 
 | 		goto error; | 
 |  | 
 | 	if (skb_in->len < (sizeof(struct usb_cdc_ncm_nth16) + | 
 | 					sizeof(struct usb_cdc_ncm_ndp16))) { | 
 | 		netif_dbg(dev, rx_err, dev->net, "frame too short\n"); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	nth16 = (struct usb_cdc_ncm_nth16 *)skb_in->data; | 
 |  | 
 | 	if (nth16->dwSignature != cpu_to_le32(USB_CDC_NCM_NTH16_SIGN)) { | 
 | 		netif_dbg(dev, rx_err, dev->net, | 
 | 			  "invalid NTH16 signature <%#010x>\n", | 
 | 			  le32_to_cpu(nth16->dwSignature)); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	len = le16_to_cpu(nth16->wBlockLength); | 
 | 	if (len > ctx->rx_max) { | 
 | 		netif_dbg(dev, rx_err, dev->net, | 
 | 			  "unsupported NTB block length %u/%u\n", len, | 
 | 			  ctx->rx_max); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	if ((ctx->rx_seq + 1) != le16_to_cpu(nth16->wSequence) && | 
 | 	    (ctx->rx_seq || le16_to_cpu(nth16->wSequence)) && | 
 | 	    !((ctx->rx_seq == 0xffff) && !le16_to_cpu(nth16->wSequence))) { | 
 | 		netif_dbg(dev, rx_err, dev->net, | 
 | 			  "sequence number glitch prev=%d curr=%d\n", | 
 | 			  ctx->rx_seq, le16_to_cpu(nth16->wSequence)); | 
 | 	} | 
 | 	ctx->rx_seq = le16_to_cpu(nth16->wSequence); | 
 |  | 
 | 	ret = le16_to_cpu(nth16->wNdpIndex); | 
 | error: | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_rx_verify_nth16); | 
 |  | 
 | /* verify NDP header and return number of datagrams, or negative error */ | 
 | int cdc_ncm_rx_verify_ndp16(struct sk_buff *skb_in, int ndpoffset) | 
 | { | 
 | 	struct usbnet *dev = netdev_priv(skb_in->dev); | 
 | 	struct usb_cdc_ncm_ndp16 *ndp16; | 
 | 	int ret = -EINVAL; | 
 |  | 
 | 	if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) { | 
 | 		netif_dbg(dev, rx_err, dev->net, "invalid NDP offset  <%u>\n", | 
 | 			  ndpoffset); | 
 | 		goto error; | 
 | 	} | 
 | 	ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset); | 
 |  | 
 | 	if (le16_to_cpu(ndp16->wLength) < USB_CDC_NCM_NDP16_LENGTH_MIN) { | 
 | 		netif_dbg(dev, rx_err, dev->net, "invalid DPT16 length <%u>\n", | 
 | 			  le16_to_cpu(ndp16->wLength)); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	ret = ((le16_to_cpu(ndp16->wLength) - | 
 | 					sizeof(struct usb_cdc_ncm_ndp16)) / | 
 | 					sizeof(struct usb_cdc_ncm_dpe16)); | 
 | 	ret--; /* we process NDP entries except for the last one */ | 
 |  | 
 | 	if ((sizeof(struct usb_cdc_ncm_ndp16) + | 
 | 	     ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) { | 
 | 		netif_dbg(dev, rx_err, dev->net, "Invalid nframes = %d\n", ret); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 |  | 
 | error: | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_rx_verify_ndp16); | 
 |  | 
 | int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 | 	int len; | 
 | 	int nframes; | 
 | 	int x; | 
 | 	int offset; | 
 | 	struct usb_cdc_ncm_ndp16 *ndp16; | 
 | 	struct usb_cdc_ncm_dpe16 *dpe16; | 
 | 	int ndpoffset; | 
 | 	int loopcount = 50; /* arbitrary max preventing infinite loop */ | 
 | 	u32 payload = 0; | 
 |  | 
 | 	ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in); | 
 | 	if (ndpoffset < 0) | 
 | 		goto error; | 
 |  | 
 | next_ndp: | 
 | 	nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset); | 
 | 	if (nframes < 0) | 
 | 		goto error; | 
 |  | 
 | 	ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset); | 
 |  | 
 | 	if (ndp16->dwSignature != cpu_to_le32(USB_CDC_NCM_NDP16_NOCRC_SIGN)) { | 
 | 		netif_dbg(dev, rx_err, dev->net, | 
 | 			  "invalid DPT16 signature <%#010x>\n", | 
 | 			  le32_to_cpu(ndp16->dwSignature)); | 
 | 		goto err_ndp; | 
 | 	} | 
 | 	dpe16 = ndp16->dpe16; | 
 |  | 
 | 	for (x = 0; x < nframes; x++, dpe16++) { | 
 | 		offset = le16_to_cpu(dpe16->wDatagramIndex); | 
 | 		len = le16_to_cpu(dpe16->wDatagramLength); | 
 |  | 
 | 		/* | 
 | 		 * CDC NCM ch. 3.7 | 
 | 		 * All entries after first NULL entry are to be ignored | 
 | 		 */ | 
 | 		if ((offset == 0) || (len == 0)) { | 
 | 			if (!x) | 
 | 				goto err_ndp; /* empty NTB */ | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* sanity checking */ | 
 | 		if (((offset + len) > skb_in->len) || | 
 | 				(len > ctx->rx_max) || (len < ETH_HLEN)) { | 
 | 			netif_dbg(dev, rx_err, dev->net, | 
 | 				  "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n", | 
 | 				  x, offset, len, skb_in); | 
 | 			if (!x) | 
 | 				goto err_ndp; | 
 | 			break; | 
 |  | 
 | 		} else { | 
 | 			/* create a fresh copy to reduce truesize */ | 
 | 			skb = netdev_alloc_skb_ip_align(dev->net,  len); | 
 | 			if (!skb) | 
 | 				goto error; | 
 | 			memcpy(skb_put(skb, len), skb_in->data + offset, len); | 
 | 			usbnet_skb_return(dev, skb); | 
 | 			payload += len;	/* count payload bytes in this NTB */ | 
 | 		} | 
 | 	} | 
 | err_ndp: | 
 | 	/* are there more NDPs to process? */ | 
 | 	ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex); | 
 | 	if (ndpoffset && loopcount--) | 
 | 		goto next_ndp; | 
 |  | 
 | 	/* update stats */ | 
 | 	ctx->rx_overhead += skb_in->len - payload; | 
 | 	ctx->rx_ntbs++; | 
 |  | 
 | 	return 1; | 
 | error: | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(cdc_ncm_rx_fixup); | 
 |  | 
 | static void | 
 | cdc_ncm_speed_change(struct usbnet *dev, | 
 | 		     struct usb_cdc_speed_change *data) | 
 | { | 
 | 	uint32_t rx_speed = le32_to_cpu(data->DLBitRRate); | 
 | 	uint32_t tx_speed = le32_to_cpu(data->ULBitRate); | 
 |  | 
 | 	/* | 
 | 	 * Currently the USB-NET API does not support reporting the actual | 
 | 	 * device speed. Do print it instead. | 
 | 	 */ | 
 | 	if ((tx_speed > 1000000) && (rx_speed > 1000000)) { | 
 | 		netif_info(dev, link, dev->net, | 
 | 			   "%u mbit/s downlink %u mbit/s uplink\n", | 
 | 			   (unsigned int)(rx_speed / 1000000U), | 
 | 			   (unsigned int)(tx_speed / 1000000U)); | 
 | 	} else { | 
 | 		netif_info(dev, link, dev->net, | 
 | 			   "%u kbit/s downlink %u kbit/s uplink\n", | 
 | 			   (unsigned int)(rx_speed / 1000U), | 
 | 			   (unsigned int)(tx_speed / 1000U)); | 
 | 	} | 
 | } | 
 |  | 
 | static void cdc_ncm_status(struct usbnet *dev, struct urb *urb) | 
 | { | 
 | 	struct cdc_ncm_ctx *ctx; | 
 | 	struct usb_cdc_notification *event; | 
 |  | 
 | 	ctx = (struct cdc_ncm_ctx *)dev->data[0]; | 
 |  | 
 | 	if (urb->actual_length < sizeof(*event)) | 
 | 		return; | 
 |  | 
 | 	/* test for split data in 8-byte chunks */ | 
 | 	if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) { | 
 | 		cdc_ncm_speed_change(dev, | 
 | 		      (struct usb_cdc_speed_change *)urb->transfer_buffer); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	event = urb->transfer_buffer; | 
 |  | 
 | 	switch (event->bNotificationType) { | 
 | 	case USB_CDC_NOTIFY_NETWORK_CONNECTION: | 
 | 		/* | 
 | 		 * According to the CDC NCM specification ch.7.1 | 
 | 		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be | 
 | 		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE. | 
 | 		 */ | 
 | 		netif_info(dev, link, dev->net, | 
 | 			   "network connection: %sconnected\n", | 
 | 			   !!event->wValue ? "" : "dis"); | 
 | 		usbnet_link_change(dev, !!event->wValue, 0); | 
 | 		break; | 
 |  | 
 | 	case USB_CDC_NOTIFY_SPEED_CHANGE: | 
 | 		if (urb->actual_length < (sizeof(*event) + | 
 | 					sizeof(struct usb_cdc_speed_change))) | 
 | 			set_bit(EVENT_STS_SPLIT, &dev->flags); | 
 | 		else | 
 | 			cdc_ncm_speed_change(dev, | 
 | 					     (struct usb_cdc_speed_change *)&event[1]); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		dev_dbg(&dev->udev->dev, | 
 | 			"NCM: unexpected notification 0x%02x!\n", | 
 | 			event->bNotificationType); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static const struct driver_info cdc_ncm_info = { | 
 | 	.description = "CDC NCM", | 
 | 	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET, | 
 | 	.bind = cdc_ncm_bind, | 
 | 	.unbind = cdc_ncm_unbind, | 
 | 	.manage_power = usbnet_manage_power, | 
 | 	.status = cdc_ncm_status, | 
 | 	.rx_fixup = cdc_ncm_rx_fixup, | 
 | 	.tx_fixup = cdc_ncm_tx_fixup, | 
 | }; | 
 |  | 
 | /* Same as cdc_ncm_info, but with FLAG_WWAN */ | 
 | static const struct driver_info wwan_info = { | 
 | 	.description = "Mobile Broadband Network Device", | 
 | 	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET | 
 | 			| FLAG_WWAN, | 
 | 	.bind = cdc_ncm_bind, | 
 | 	.unbind = cdc_ncm_unbind, | 
 | 	.manage_power = usbnet_manage_power, | 
 | 	.status = cdc_ncm_status, | 
 | 	.rx_fixup = cdc_ncm_rx_fixup, | 
 | 	.tx_fixup = cdc_ncm_tx_fixup, | 
 | }; | 
 |  | 
 | /* Same as wwan_info, but with FLAG_NOARP  */ | 
 | static const struct driver_info wwan_noarp_info = { | 
 | 	.description = "Mobile Broadband Network Device (NO ARP)", | 
 | 	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET | 
 | 			| FLAG_WWAN | FLAG_NOARP, | 
 | 	.bind = cdc_ncm_bind, | 
 | 	.unbind = cdc_ncm_unbind, | 
 | 	.manage_power = usbnet_manage_power, | 
 | 	.status = cdc_ncm_status, | 
 | 	.rx_fixup = cdc_ncm_rx_fixup, | 
 | 	.tx_fixup = cdc_ncm_tx_fixup, | 
 | }; | 
 |  | 
 | static const struct usb_device_id cdc_devs[] = { | 
 | 	/* Ericsson MBM devices like F5521gw */ | 
 | 	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | 
 | 		| USB_DEVICE_ID_MATCH_VENDOR, | 
 | 	  .idVendor = 0x0bdb, | 
 | 	  .bInterfaceClass = USB_CLASS_COMM, | 
 | 	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, | 
 | 	  .bInterfaceProtocol = USB_CDC_PROTO_NONE, | 
 | 	  .driver_info = (unsigned long) &wwan_info, | 
 | 	}, | 
 |  | 
 | 	/* Dell branded MBM devices like DW5550 */ | 
 | 	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | 
 | 		| USB_DEVICE_ID_MATCH_VENDOR, | 
 | 	  .idVendor = 0x413c, | 
 | 	  .bInterfaceClass = USB_CLASS_COMM, | 
 | 	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, | 
 | 	  .bInterfaceProtocol = USB_CDC_PROTO_NONE, | 
 | 	  .driver_info = (unsigned long) &wwan_info, | 
 | 	}, | 
 |  | 
 | 	/* Toshiba branded MBM devices */ | 
 | 	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | 
 | 		| USB_DEVICE_ID_MATCH_VENDOR, | 
 | 	  .idVendor = 0x0930, | 
 | 	  .bInterfaceClass = USB_CLASS_COMM, | 
 | 	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, | 
 | 	  .bInterfaceProtocol = USB_CDC_PROTO_NONE, | 
 | 	  .driver_info = (unsigned long) &wwan_info, | 
 | 	}, | 
 |  | 
 | 	/* tag Huawei devices as wwan */ | 
 | 	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, | 
 | 					USB_CLASS_COMM, | 
 | 					USB_CDC_SUBCLASS_NCM, | 
 | 					USB_CDC_PROTO_NONE), | 
 | 	  .driver_info = (unsigned long)&wwan_info, | 
 | 	}, | 
 |  | 
 | 	/* Infineon(now Intel) HSPA Modem platform */ | 
 | 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1519, 0x0443, | 
 | 		USB_CLASS_COMM, | 
 | 		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), | 
 | 	  .driver_info = (unsigned long)&wwan_noarp_info, | 
 | 	}, | 
 |  | 
 | 	/* Generic CDC-NCM devices */ | 
 | 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, | 
 | 		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), | 
 | 		.driver_info = (unsigned long)&cdc_ncm_info, | 
 | 	}, | 
 | 	{ | 
 | 	}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(usb, cdc_devs); | 
 |  | 
 | static struct usb_driver cdc_ncm_driver = { | 
 | 	.name = "cdc_ncm", | 
 | 	.id_table = cdc_devs, | 
 | 	.probe = usbnet_probe, | 
 | 	.disconnect = usbnet_disconnect, | 
 | 	.suspend = usbnet_suspend, | 
 | 	.resume = usbnet_resume, | 
 | 	.reset_resume =	usbnet_resume, | 
 | 	.supports_autosuspend = 1, | 
 | 	.disable_hub_initiated_lpm = 1, | 
 | }; | 
 |  | 
 | module_usb_driver(cdc_ncm_driver); | 
 |  | 
 | MODULE_AUTHOR("Hans Petter Selasky"); | 
 | MODULE_DESCRIPTION("USB CDC NCM host driver"); | 
 | MODULE_LICENSE("Dual BSD/GPL"); |