|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * IPWireless 3G PCMCIA Network Driver | 
|  | * | 
|  | * Original code | 
|  | *   by Stephen Blackheath <stephen@blacksapphire.com>, | 
|  | *      Ben Martel <benm@symmetric.co.nz> | 
|  | * | 
|  | * Copyrighted as follows: | 
|  | *   Copyright (C) 2004 by Symmetric Systems Ltd (NZ) | 
|  | * | 
|  | * Various driver changes and rewrites, port to new kernels | 
|  | *   Copyright (C) 2006-2007 Jiri Kosina | 
|  | * | 
|  | * Misc code cleanups and updates | 
|  | *   Copyright (C) 2007 David Sterba | 
|  | */ | 
|  |  | 
|  | #include "hardware.h" | 
|  | #include "network.h" | 
|  | #include "main.h" | 
|  | #include "tty.h" | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <pcmcia/cisreg.h> | 
|  | #include <pcmcia/device_id.h> | 
|  | #include <pcmcia/ss.h> | 
|  | #include <pcmcia/ds.h> | 
|  |  | 
|  | static const struct pcmcia_device_id ipw_ids[] = { | 
|  | PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), | 
|  | PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200), | 
|  | PCMCIA_DEVICE_NULL | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pcmcia, ipw_ids); | 
|  |  | 
|  | static void ipwireless_detach(struct pcmcia_device *link); | 
|  |  | 
|  | /* | 
|  | * Module params | 
|  | */ | 
|  | /* Debug mode: more verbose, print sent/recv bytes */ | 
|  | int ipwireless_debug; | 
|  | int ipwireless_loopback; | 
|  | int ipwireless_out_queue = 10; | 
|  |  | 
|  | module_param_named(debug, ipwireless_debug, int, 0); | 
|  | module_param_named(loopback, ipwireless_loopback, int, 0); | 
|  | module_param_named(out_queue, ipwireless_out_queue, int, 0); | 
|  | MODULE_PARM_DESC(debug, "switch on debug messages [0]"); | 
|  | MODULE_PARM_DESC(loopback, | 
|  | "debug: enable ras_raw channel [0]"); | 
|  | MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]"); | 
|  |  | 
|  | /* Executes in process context. */ | 
|  | static void signalled_reboot_work(struct work_struct *work_reboot) | 
|  | { | 
|  | struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev, | 
|  | work_reboot); | 
|  | struct pcmcia_device *link = ipw->link; | 
|  | pcmcia_reset_card(link->socket); | 
|  | } | 
|  |  | 
|  | static void signalled_reboot_callback(void *callback_data) | 
|  | { | 
|  | struct ipw_dev *ipw = (struct ipw_dev *) callback_data; | 
|  |  | 
|  | /* Delegate to process context. */ | 
|  | schedule_work(&ipw->work_reboot); | 
|  | } | 
|  |  | 
|  | static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) | 
|  | { | 
|  | struct ipw_dev *ipw = priv_data; | 
|  | int ret; | 
|  |  | 
|  | p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | 
|  | p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; | 
|  |  | 
|  | /* 0x40 causes it to generate level mode interrupts. */ | 
|  | /* 0x04 enables IREQ pin. */ | 
|  | p_dev->config_index |= 0x44; | 
|  | p_dev->io_lines = 16; | 
|  | ret = pcmcia_request_io(p_dev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (!request_region(p_dev->resource[0]->start, | 
|  | resource_size(p_dev->resource[0]), | 
|  | IPWIRELESS_PCCARD_NAME)) { | 
|  | ret = -EBUSY; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | p_dev->resource[2]->flags |= | 
|  | WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; | 
|  |  | 
|  | ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); | 
|  | if (ret != 0) | 
|  | goto exit1; | 
|  |  | 
|  | ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); | 
|  | if (ret != 0) | 
|  | goto exit1; | 
|  |  | 
|  | ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; | 
|  |  | 
|  | ipw->common_memory = ioremap(p_dev->resource[2]->start, | 
|  | resource_size(p_dev->resource[2])); | 
|  | if (!request_mem_region(p_dev->resource[2]->start, | 
|  | resource_size(p_dev->resource[2]), | 
|  | IPWIRELESS_PCCARD_NAME)) { | 
|  | ret = -EBUSY; | 
|  | goto exit2; | 
|  | } | 
|  |  | 
|  | p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | | 
|  | WIN_ENABLE; | 
|  | p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ | 
|  | ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); | 
|  | if (ret != 0) | 
|  | goto exit3; | 
|  |  | 
|  | ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); | 
|  | if (ret != 0) | 
|  | goto exit3; | 
|  |  | 
|  | ipw->attr_memory = ioremap(p_dev->resource[3]->start, | 
|  | resource_size(p_dev->resource[3])); | 
|  | if (!request_mem_region(p_dev->resource[3]->start, | 
|  | resource_size(p_dev->resource[3]), | 
|  | IPWIRELESS_PCCARD_NAME)) { | 
|  | ret = -EBUSY; | 
|  | goto exit4; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit4: | 
|  | iounmap(ipw->attr_memory); | 
|  | exit3: | 
|  | release_mem_region(p_dev->resource[2]->start, | 
|  | resource_size(p_dev->resource[2])); | 
|  | exit2: | 
|  | iounmap(ipw->common_memory); | 
|  | exit1: | 
|  | release_region(p_dev->resource[0]->start, | 
|  | resource_size(p_dev->resource[0])); | 
|  | exit: | 
|  | pcmcia_disable_device(p_dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int config_ipwireless(struct ipw_dev *ipw) | 
|  | { | 
|  | struct pcmcia_device *link = ipw->link; | 
|  | int ret = 0; | 
|  |  | 
|  | ipw->is_v2_card = 0; | 
|  | link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | | 
|  | CONF_ENABLE_IRQ; | 
|  |  | 
|  | ret = pcmcia_loop_config(link, ipwireless_probe, ipw); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | INIT_WORK(&ipw->work_reboot, signalled_reboot_work); | 
|  |  | 
|  | ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, | 
|  | ipw->attr_memory, ipw->common_memory, | 
|  | ipw->is_v2_card, signalled_reboot_callback, | 
|  | ipw); | 
|  |  | 
|  | ret = pcmcia_request_irq(link, ipwireless_interrupt); | 
|  | if (ret != 0) | 
|  | goto exit; | 
|  |  | 
|  | printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", | 
|  | ipw->is_v2_card ? "V2/V3" : "V1"); | 
|  | printk(KERN_INFO IPWIRELESS_PCCARD_NAME | 
|  | ": I/O ports %pR, irq %d\n", link->resource[0], | 
|  | (unsigned int) link->irq); | 
|  | if (ipw->attr_memory && ipw->common_memory) | 
|  | printk(KERN_INFO IPWIRELESS_PCCARD_NAME | 
|  | ": attr memory %pR, common memory %pR\n", | 
|  | link->resource[3], | 
|  | link->resource[2]); | 
|  |  | 
|  | ipw->network = ipwireless_network_create(ipw->hardware); | 
|  | if (!ipw->network) | 
|  | goto exit; | 
|  |  | 
|  | ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network); | 
|  | if (!ipw->tty) | 
|  | goto exit; | 
|  |  | 
|  | ipwireless_init_hardware_v2_v3(ipw->hardware); | 
|  |  | 
|  | /* | 
|  | * Do the RequestConfiguration last, because it enables interrupts. | 
|  | * Then we don't get any interrupts before we're ready for them. | 
|  | */ | 
|  | ret = pcmcia_enable_device(link); | 
|  | if (ret != 0) | 
|  | goto exit; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | if (ipw->common_memory) { | 
|  | release_mem_region(link->resource[2]->start, | 
|  | resource_size(link->resource[2])); | 
|  | iounmap(ipw->common_memory); | 
|  | } | 
|  | if (ipw->attr_memory) { | 
|  | release_mem_region(link->resource[3]->start, | 
|  | resource_size(link->resource[3])); | 
|  | iounmap(ipw->attr_memory); | 
|  | } | 
|  | pcmcia_disable_device(link); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void release_ipwireless(struct ipw_dev *ipw) | 
|  | { | 
|  | release_region(ipw->link->resource[0]->start, | 
|  | resource_size(ipw->link->resource[0])); | 
|  | if (ipw->common_memory) { | 
|  | release_mem_region(ipw->link->resource[2]->start, | 
|  | resource_size(ipw->link->resource[2])); | 
|  | iounmap(ipw->common_memory); | 
|  | } | 
|  | if (ipw->attr_memory) { | 
|  | release_mem_region(ipw->link->resource[3]->start, | 
|  | resource_size(ipw->link->resource[3])); | 
|  | iounmap(ipw->attr_memory); | 
|  | } | 
|  | pcmcia_disable_device(ipw->link); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ipwireless_attach() creates an "instance" of the driver, allocating | 
|  | * local data structures for one device (one interface).  The device | 
|  | * is registered with Card Services. | 
|  | * | 
|  | * The pcmcia_device structure is initialized, but we don't actually | 
|  | * configure the card at this point -- we wait until we receive a | 
|  | * card insertion event. | 
|  | */ | 
|  | static int ipwireless_attach(struct pcmcia_device *link) | 
|  | { | 
|  | struct ipw_dev *ipw; | 
|  | int ret; | 
|  |  | 
|  | ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL); | 
|  | if (!ipw) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ipw->link = link; | 
|  | link->priv = ipw; | 
|  |  | 
|  | ipw->hardware = ipwireless_hardware_create(); | 
|  | if (!ipw->hardware) { | 
|  | kfree(ipw); | 
|  | return -ENOMEM; | 
|  | } | 
|  | /* RegisterClient will call config_ipwireless */ | 
|  |  | 
|  | ret = config_ipwireless(ipw); | 
|  |  | 
|  | if (ret != 0) { | 
|  | ipwireless_detach(link); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This deletes a driver "instance".  The device is de-registered with | 
|  | * Card Services.  If it has been released, all local data structures | 
|  | * are freed.  Otherwise, the structures will be freed when the device | 
|  | * is released. | 
|  | */ | 
|  | static void ipwireless_detach(struct pcmcia_device *link) | 
|  | { | 
|  | struct ipw_dev *ipw = link->priv; | 
|  |  | 
|  | release_ipwireless(ipw); | 
|  |  | 
|  | if (ipw->tty != NULL) | 
|  | ipwireless_tty_free(ipw->tty); | 
|  | if (ipw->network != NULL) | 
|  | ipwireless_network_free(ipw->network); | 
|  | if (ipw->hardware != NULL) | 
|  | ipwireless_hardware_free(ipw->hardware); | 
|  | kfree(ipw); | 
|  | } | 
|  |  | 
|  | static struct pcmcia_driver me = { | 
|  | .owner		= THIS_MODULE, | 
|  | .probe          = ipwireless_attach, | 
|  | .remove         = ipwireless_detach, | 
|  | .name		= IPWIRELESS_PCCARD_NAME, | 
|  | .id_table       = ipw_ids | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Module insertion : initialisation of the module. | 
|  | * Register the card with cardmgr... | 
|  | */ | 
|  | static int __init init_ipwireless(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = ipwireless_tty_init(); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | ret = pcmcia_register_driver(&me); | 
|  | if (ret != 0) | 
|  | ipwireless_tty_release(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Module removal | 
|  | */ | 
|  | static void __exit exit_ipwireless(void) | 
|  | { | 
|  | pcmcia_unregister_driver(&me); | 
|  | ipwireless_tty_release(); | 
|  | } | 
|  |  | 
|  | module_init(init_ipwireless); | 
|  | module_exit(exit_ipwireless); | 
|  |  | 
|  | MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR); | 
|  | MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION); | 
|  | MODULE_LICENSE("GPL"); |