| /* |
| * Copyright(c) 2007 Atheros Corporation. All rights reserved. |
| * |
| * Derived from Intel e1000 driver |
| * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include "atl1e.h" |
| |
| #define DRV_VERSION "1.0.0.7-NAPI" |
| |
| char atl1e_driver_name[] = "ATL1E"; |
| char atl1e_driver_version[] = DRV_VERSION; |
| #define PCI_DEVICE_ID_ATTANSIC_L1E 0x1026 |
| /* |
| * atl1e_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static const struct pci_device_id atl1e_pci_tbl[] = { |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)}, |
| /* required last entry */ |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(pci, atl1e_pci_tbl); |
| |
| MODULE_AUTHOR("Atheros Corporation, <xiong.huang@atheros.com>, Jie Yang <jie.yang@atheros.com>"); |
| MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter); |
| |
| static const u16 |
| atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] = |
| { |
| {REG_HOST_RXF0_PAGE0_VLD, REG_HOST_RXF0_PAGE1_VLD}, |
| {REG_HOST_RXF1_PAGE0_VLD, REG_HOST_RXF1_PAGE1_VLD}, |
| {REG_HOST_RXF2_PAGE0_VLD, REG_HOST_RXF2_PAGE1_VLD}, |
| {REG_HOST_RXF3_PAGE0_VLD, REG_HOST_RXF3_PAGE1_VLD} |
| }; |
| |
| static const u16 atl1e_rx_page_hi_addr_regs[AT_MAX_RECEIVE_QUEUE] = |
| { |
| REG_RXF0_BASE_ADDR_HI, |
| REG_RXF1_BASE_ADDR_HI, |
| REG_RXF2_BASE_ADDR_HI, |
| REG_RXF3_BASE_ADDR_HI |
| }; |
| |
| static const u16 |
| atl1e_rx_page_lo_addr_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] = |
| { |
| {REG_HOST_RXF0_PAGE0_LO, REG_HOST_RXF0_PAGE1_LO}, |
| {REG_HOST_RXF1_PAGE0_LO, REG_HOST_RXF1_PAGE1_LO}, |
| {REG_HOST_RXF2_PAGE0_LO, REG_HOST_RXF2_PAGE1_LO}, |
| {REG_HOST_RXF3_PAGE0_LO, REG_HOST_RXF3_PAGE1_LO} |
| }; |
| |
| static const u16 |
| atl1e_rx_page_write_offset_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] = |
| { |
| {REG_HOST_RXF0_MB0_LO, REG_HOST_RXF0_MB1_LO}, |
| {REG_HOST_RXF1_MB0_LO, REG_HOST_RXF1_MB1_LO}, |
| {REG_HOST_RXF2_MB0_LO, REG_HOST_RXF2_MB1_LO}, |
| {REG_HOST_RXF3_MB0_LO, REG_HOST_RXF3_MB1_LO} |
| }; |
| |
| static const u16 atl1e_pay_load_size[] = { |
| 128, 256, 512, 1024, 2048, 4096, |
| }; |
| |
| /** |
| * atl1e_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| */ |
| static inline void atl1e_irq_enable(struct atl1e_adapter *adapter) |
| { |
| if (likely(atomic_dec_and_test(&adapter->irq_sem))) { |
| AT_WRITE_REG(&adapter->hw, REG_ISR, 0); |
| AT_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK); |
| AT_WRITE_FLUSH(&adapter->hw); |
| } |
| } |
| |
| /** |
| * atl1e_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| */ |
| static inline void atl1e_irq_disable(struct atl1e_adapter *adapter) |
| { |
| atomic_inc(&adapter->irq_sem); |
| AT_WRITE_REG(&adapter->hw, REG_IMR, 0); |
| AT_WRITE_FLUSH(&adapter->hw); |
| synchronize_irq(adapter->pdev->irq); |
| } |
| |
| /** |
| * atl1e_irq_reset - reset interrupt confiure on the NIC |
| * @adapter: board private structure |
| */ |
| static inline void atl1e_irq_reset(struct atl1e_adapter *adapter) |
| { |
| atomic_set(&adapter->irq_sem, 0); |
| AT_WRITE_REG(&adapter->hw, REG_ISR, 0); |
| AT_WRITE_REG(&adapter->hw, REG_IMR, 0); |
| AT_WRITE_FLUSH(&adapter->hw); |
| } |
| |
| /** |
| * atl1e_phy_config - Timer Call-back |
| * @data: pointer to netdev cast into an unsigned long |
| */ |
| static void atl1e_phy_config(struct timer_list *t) |
| { |
| struct atl1e_adapter *adapter = from_timer(adapter, t, |
| phy_config_timer); |
| struct atl1e_hw *hw = &adapter->hw; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| atl1e_restart_autoneg(hw); |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| } |
| |
| void atl1e_reinit_locked(struct atl1e_adapter *adapter) |
| { |
| |
| WARN_ON(in_interrupt()); |
| while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) |
| msleep(1); |
| atl1e_down(adapter); |
| atl1e_up(adapter); |
| clear_bit(__AT_RESETTING, &adapter->flags); |
| } |
| |
| static void atl1e_reset_task(struct work_struct *work) |
| { |
| struct atl1e_adapter *adapter; |
| adapter = container_of(work, struct atl1e_adapter, reset_task); |
| |
| atl1e_reinit_locked(adapter); |
| } |
| |
| static int atl1e_check_link(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| int err = 0; |
| u16 speed, duplex, phy_data; |
| |
| /* MII_BMSR must read twice */ |
| atl1e_read_phy_reg(hw, MII_BMSR, &phy_data); |
| atl1e_read_phy_reg(hw, MII_BMSR, &phy_data); |
| if ((phy_data & BMSR_LSTATUS) == 0) { |
| /* link down */ |
| if (netif_carrier_ok(netdev)) { /* old link state: Up */ |
| u32 value; |
| /* disable rx */ |
| value = AT_READ_REG(hw, REG_MAC_CTRL); |
| value &= ~MAC_CTRL_RX_EN; |
| AT_WRITE_REG(hw, REG_MAC_CTRL, value); |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| } |
| } else { |
| /* Link Up */ |
| err = atl1e_get_speed_and_duplex(hw, &speed, &duplex); |
| if (unlikely(err)) |
| return err; |
| |
| /* link result is our setting */ |
| if (adapter->link_speed != speed || |
| adapter->link_duplex != duplex) { |
| adapter->link_speed = speed; |
| adapter->link_duplex = duplex; |
| atl1e_setup_mac_ctrl(adapter); |
| netdev_info(netdev, |
| "NIC Link is Up <%d Mbps %s Duplex>\n", |
| adapter->link_speed, |
| adapter->link_duplex == FULL_DUPLEX ? |
| "Full" : "Half"); |
| } |
| |
| if (!netif_carrier_ok(netdev)) { |
| /* Link down -> Up */ |
| netif_carrier_on(netdev); |
| netif_wake_queue(netdev); |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * atl1e_link_chg_task - deal with link change event Out of interrupt context |
| * @netdev: network interface device structure |
| */ |
| static void atl1e_link_chg_task(struct work_struct *work) |
| { |
| struct atl1e_adapter *adapter; |
| unsigned long flags; |
| |
| adapter = container_of(work, struct atl1e_adapter, link_chg_task); |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| atl1e_check_link(adapter); |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| } |
| |
| static void atl1e_link_chg_event(struct atl1e_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| u16 phy_data = 0; |
| u16 link_up = 0; |
| |
| spin_lock(&adapter->mdio_lock); |
| atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| spin_unlock(&adapter->mdio_lock); |
| link_up = phy_data & BMSR_LSTATUS; |
| /* notify upper layer link down ASAP */ |
| if (!link_up) { |
| if (netif_carrier_ok(netdev)) { |
| /* old link state: Up */ |
| netdev_info(netdev, "NIC Link is Down\n"); |
| adapter->link_speed = SPEED_0; |
| netif_stop_queue(netdev); |
| } |
| } |
| schedule_work(&adapter->link_chg_task); |
| } |
| |
| static void atl1e_del_timer(struct atl1e_adapter *adapter) |
| { |
| del_timer_sync(&adapter->phy_config_timer); |
| } |
| |
| static void atl1e_cancel_work(struct atl1e_adapter *adapter) |
| { |
| cancel_work_sync(&adapter->reset_task); |
| cancel_work_sync(&adapter->link_chg_task); |
| } |
| |
| /** |
| * atl1e_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| */ |
| static void atl1e_tx_timeout(struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| /* Do the reset outside of interrupt context */ |
| schedule_work(&adapter->reset_task); |
| } |
| |
| /** |
| * atl1e_set_multi - Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_multi entry point is called whenever the multicast address |
| * list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper multicast, |
| * promiscuous mode, and all-multi behavior. |
| */ |
| static void atl1e_set_multi(struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| struct atl1e_hw *hw = &adapter->hw; |
| struct netdev_hw_addr *ha; |
| u32 mac_ctrl_data = 0; |
| u32 hash_value; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| mac_ctrl_data = AT_READ_REG(hw, REG_MAC_CTRL); |
| |
| if (netdev->flags & IFF_PROMISC) { |
| mac_ctrl_data |= MAC_CTRL_PROMIS_EN; |
| } else if (netdev->flags & IFF_ALLMULTI) { |
| mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; |
| mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN; |
| } else { |
| mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); |
| } |
| |
| AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); |
| |
| /* clear the old settings from the multicast hash table */ |
| AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); |
| AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); |
| |
| /* comoute mc addresses' hash value ,and put it into hash table */ |
| netdev_for_each_mc_addr(ha, netdev) { |
| hash_value = atl1e_hash_mc_addr(hw, ha->addr); |
| atl1e_hash_set(hw, hash_value); |
| } |
| } |
| |
| static void __atl1e_rx_mode(netdev_features_t features, u32 *mac_ctrl_data) |
| { |
| |
| if (features & NETIF_F_RXALL) { |
| /* enable RX of ALL frames */ |
| *mac_ctrl_data |= MAC_CTRL_DBG; |
| } else { |
| /* disable RX of ALL frames */ |
| *mac_ctrl_data &= ~MAC_CTRL_DBG; |
| } |
| } |
| |
| static void atl1e_rx_mode(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| u32 mac_ctrl_data = 0; |
| |
| netdev_dbg(adapter->netdev, "%s\n", __func__); |
| |
| atl1e_irq_disable(adapter); |
| mac_ctrl_data = AT_READ_REG(&adapter->hw, REG_MAC_CTRL); |
| __atl1e_rx_mode(features, &mac_ctrl_data); |
| AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); |
| atl1e_irq_enable(adapter); |
| } |
| |
| |
| static void __atl1e_vlan_mode(netdev_features_t features, u32 *mac_ctrl_data) |
| { |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) { |
| /* enable VLAN tag insert/strip */ |
| *mac_ctrl_data |= MAC_CTRL_RMV_VLAN; |
| } else { |
| /* disable VLAN tag insert/strip */ |
| *mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN; |
| } |
| } |
| |
| static void atl1e_vlan_mode(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| u32 mac_ctrl_data = 0; |
| |
| netdev_dbg(adapter->netdev, "%s\n", __func__); |
| |
| atl1e_irq_disable(adapter); |
| mac_ctrl_data = AT_READ_REG(&adapter->hw, REG_MAC_CTRL); |
| __atl1e_vlan_mode(features, &mac_ctrl_data); |
| AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); |
| atl1e_irq_enable(adapter); |
| } |
| |
| static void atl1e_restore_vlan(struct atl1e_adapter *adapter) |
| { |
| netdev_dbg(adapter->netdev, "%s\n", __func__); |
| atl1e_vlan_mode(adapter->netdev, adapter->netdev->features); |
| } |
| |
| /** |
| * atl1e_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1e_set_mac_addr(struct net_device *netdev, void *p) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| if (netif_running(netdev)) |
| return -EBUSY; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); |
| |
| atl1e_hw_set_mac_addr(&adapter->hw); |
| |
| return 0; |
| } |
| |
| static netdev_features_t atl1e_fix_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| /* |
| * Since there is no support for separate rx/tx vlan accel |
| * enable/disable make sure tx flag is always in same state as rx. |
| */ |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) |
| features |= NETIF_F_HW_VLAN_CTAG_TX; |
| else |
| features &= ~NETIF_F_HW_VLAN_CTAG_TX; |
| |
| return features; |
| } |
| |
| static int atl1e_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| netdev_features_t changed = netdev->features ^ features; |
| |
| if (changed & NETIF_F_HW_VLAN_CTAG_RX) |
| atl1e_vlan_mode(netdev, features); |
| |
| if (changed & NETIF_F_RXALL) |
| atl1e_rx_mode(netdev, features); |
| |
| |
| return 0; |
| } |
| |
| /** |
| * atl1e_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atl1e_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| |
| /* set MTU */ |
| if (netif_running(netdev)) { |
| while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) |
| msleep(1); |
| netdev->mtu = new_mtu; |
| adapter->hw.max_frame_size = new_mtu; |
| adapter->hw.rx_jumbo_th = (max_frame + 7) >> 3; |
| atl1e_down(adapter); |
| atl1e_up(adapter); |
| clear_bit(__AT_RESETTING, &adapter->flags); |
| } |
| return 0; |
| } |
| |
| /* |
| * caller should hold mdio_lock |
| */ |
| static int atl1e_mdio_read(struct net_device *netdev, int phy_id, int reg_num) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| u16 result; |
| |
| atl1e_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result); |
| return result; |
| } |
| |
| static void atl1e_mdio_write(struct net_device *netdev, int phy_id, |
| int reg_num, int val) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| atl1e_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val); |
| } |
| |
| static int atl1e_mii_ioctl(struct net_device *netdev, |
| struct ifreq *ifr, int cmd) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| struct mii_ioctl_data *data = if_mii(ifr); |
| unsigned long flags; |
| int retval = 0; |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&adapter->mdio_lock, flags); |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = 0; |
| break; |
| |
| case SIOCGMIIREG: |
| if (atl1e_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, |
| &data->val_out)) { |
| retval = -EIO; |
| goto out; |
| } |
| break; |
| |
| case SIOCSMIIREG: |
| if (data->reg_num & ~(0x1F)) { |
| retval = -EFAULT; |
| goto out; |
| } |
| |
| netdev_dbg(adapter->netdev, "<atl1e_mii_ioctl> write %x %x\n", |
| data->reg_num, data->val_in); |
| if (atl1e_write_phy_reg(&adapter->hw, |
| data->reg_num, data->val_in)) { |
| retval = -EIO; |
| goto out; |
| } |
| break; |
| |
| default: |
| retval = -EOPNOTSUPP; |
| break; |
| } |
| out: |
| spin_unlock_irqrestore(&adapter->mdio_lock, flags); |
| return retval; |
| |
| } |
| |
| static int atl1e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| case SIOCGMIIREG: |
| case SIOCSMIIREG: |
| return atl1e_mii_ioctl(netdev, ifr, cmd); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static void atl1e_setup_pcicmd(struct pci_dev *pdev) |
| { |
| u16 cmd; |
| |
| pci_read_config_word(pdev, PCI_COMMAND, &cmd); |
| cmd &= ~(PCI_COMMAND_INTX_DISABLE | PCI_COMMAND_IO); |
| cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| pci_write_config_word(pdev, PCI_COMMAND, cmd); |
| |
| /* |
| * some motherboards BIOS(PXE/EFI) driver may set PME |
| * while they transfer control to OS (Windows/Linux) |
| * so we should clear this bit before NIC work normally |
| */ |
| pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0); |
| msleep(1); |
| } |
| |
| /** |
| * atl1e_alloc_queues - Allocate memory for all rings |
| * @adapter: board private structure to initialize |
| * |
| */ |
| static int atl1e_alloc_queues(struct atl1e_adapter *adapter) |
| { |
| return 0; |
| } |
| |
| /** |
| * atl1e_sw_init - Initialize general software structures (struct atl1e_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * atl1e_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| */ |
| static int atl1e_sw_init(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_hw *hw = &adapter->hw; |
| struct pci_dev *pdev = adapter->pdev; |
| u32 phy_status_data = 0; |
| |
| adapter->wol = 0; |
| adapter->link_speed = SPEED_0; /* hardware init */ |
| adapter->link_duplex = FULL_DUPLEX; |
| adapter->num_rx_queues = 1; |
| |
| /* PCI config space info */ |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_id = pdev->subsystem_device; |
| hw->revision_id = pdev->revision; |
| |
| pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); |
| |
| phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS); |
| /* nic type */ |
| if (hw->revision_id >= 0xF0) { |
| hw->nic_type = athr_l2e_revB; |
| } else { |
| if (phy_status_data & PHY_STATUS_100M) |
| hw->nic_type = athr_l1e; |
| else |
| hw->nic_type = athr_l2e_revA; |
| } |
| |
| phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS); |
| |
| if (phy_status_data & PHY_STATUS_EMI_CA) |
| hw->emi_ca = true; |
| else |
| hw->emi_ca = false; |
| |
| hw->phy_configured = false; |
| hw->preamble_len = 7; |
| hw->max_frame_size = adapter->netdev->mtu; |
| hw->rx_jumbo_th = (hw->max_frame_size + ETH_HLEN + |
| VLAN_HLEN + ETH_FCS_LEN + 7) >> 3; |
| |
| hw->rrs_type = atl1e_rrs_disable; |
| hw->indirect_tab = 0; |
| hw->base_cpu = 0; |
| |
| /* need confirm */ |
| |
| hw->ict = 50000; /* 100ms */ |
| hw->smb_timer = 200000; /* 200ms */ |
| hw->tpd_burst = 5; |
| hw->rrd_thresh = 1; |
| hw->tpd_thresh = adapter->tx_ring.count / 2; |
| hw->rx_count_down = 4; /* 2us resolution */ |
| hw->tx_count_down = hw->imt * 4 / 3; |
| hw->dmar_block = atl1e_dma_req_1024; |
| hw->dmaw_block = atl1e_dma_req_1024; |
| hw->dmar_dly_cnt = 15; |
| hw->dmaw_dly_cnt = 4; |
| |
| if (atl1e_alloc_queues(adapter)) { |
| netdev_err(adapter->netdev, "Unable to allocate memory for queues\n"); |
| return -ENOMEM; |
| } |
| |
| atomic_set(&adapter->irq_sem, 1); |
| spin_lock_init(&adapter->mdio_lock); |
| |
| set_bit(__AT_DOWN, &adapter->flags); |
| |
| return 0; |
| } |
| |
| /** |
| * atl1e_clean_tx_ring - Free Tx-skb |
| * @adapter: board private structure |
| */ |
| static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| struct atl1e_tx_buffer *tx_buffer = NULL; |
| struct pci_dev *pdev = adapter->pdev; |
| u16 index, ring_count; |
| |
| if (tx_ring->desc == NULL || tx_ring->tx_buffer == NULL) |
| return; |
| |
| ring_count = tx_ring->count; |
| /* first unmmap dma */ |
| for (index = 0; index < ring_count; index++) { |
| tx_buffer = &tx_ring->tx_buffer[index]; |
| if (tx_buffer->dma) { |
| if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE) |
| pci_unmap_single(pdev, tx_buffer->dma, |
| tx_buffer->length, PCI_DMA_TODEVICE); |
| else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE) |
| pci_unmap_page(pdev, tx_buffer->dma, |
| tx_buffer->length, PCI_DMA_TODEVICE); |
| tx_buffer->dma = 0; |
| } |
| } |
| /* second free skb */ |
| for (index = 0; index < ring_count; index++) { |
| tx_buffer = &tx_ring->tx_buffer[index]; |
| if (tx_buffer->skb) { |
| dev_kfree_skb_any(tx_buffer->skb); |
| tx_buffer->skb = NULL; |
| } |
| } |
| /* Zero out Tx-buffers */ |
| memset(tx_ring->desc, 0, sizeof(struct atl1e_tpd_desc) * |
| ring_count); |
| memset(tx_ring->tx_buffer, 0, sizeof(struct atl1e_tx_buffer) * |
| ring_count); |
| } |
| |
| /** |
| * atl1e_clean_rx_ring - Free rx-reservation skbs |
| * @adapter: board private structure |
| */ |
| static void atl1e_clean_rx_ring(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_rx_ring *rx_ring = |
| &adapter->rx_ring; |
| struct atl1e_rx_page_desc *rx_page_desc = rx_ring->rx_page_desc; |
| u16 i, j; |
| |
| |
| if (adapter->ring_vir_addr == NULL) |
| return; |
| /* Zero out the descriptor ring */ |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { |
| if (rx_page_desc[i].rx_page[j].addr != NULL) { |
| memset(rx_page_desc[i].rx_page[j].addr, 0, |
| rx_ring->real_page_size); |
| } |
| } |
| } |
| } |
| |
| static void atl1e_cal_ring_size(struct atl1e_adapter *adapter, u32 *ring_size) |
| { |
| *ring_size = ((u32)(adapter->tx_ring.count * |
| sizeof(struct atl1e_tpd_desc) + 7 |
| /* tx ring, qword align */ |
| + adapter->rx_ring.real_page_size * AT_PAGE_NUM_PER_QUEUE * |
| adapter->num_rx_queues + 31 |
| /* rx ring, 32 bytes align */ |
| + (1 + AT_PAGE_NUM_PER_QUEUE * adapter->num_rx_queues) * |
| sizeof(u32) + 3)); |
| /* tx, rx cmd, dword align */ |
| } |
| |
| static void atl1e_init_ring_resources(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_rx_ring *rx_ring = NULL; |
| |
| rx_ring = &adapter->rx_ring; |
| |
| rx_ring->real_page_size = adapter->rx_ring.page_size |
| + adapter->hw.max_frame_size |
| + ETH_HLEN + VLAN_HLEN |
| + ETH_FCS_LEN; |
| rx_ring->real_page_size = roundup(rx_ring->real_page_size, 32); |
| atl1e_cal_ring_size(adapter, &adapter->ring_size); |
| |
| adapter->ring_vir_addr = NULL; |
| adapter->rx_ring.desc = NULL; |
| rwlock_init(&adapter->tx_ring.tx_lock); |
| } |
| |
| /* |
| * Read / Write Ptr Initialize: |
| */ |
| static void atl1e_init_ring_ptrs(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_tx_ring *tx_ring = NULL; |
| struct atl1e_rx_ring *rx_ring = NULL; |
| struct atl1e_rx_page_desc *rx_page_desc = NULL; |
| int i, j; |
| |
| tx_ring = &adapter->tx_ring; |
| rx_ring = &adapter->rx_ring; |
| rx_page_desc = rx_ring->rx_page_desc; |
| |
| tx_ring->next_to_use = 0; |
| atomic_set(&tx_ring->next_to_clean, 0); |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| rx_page_desc[i].rx_using = 0; |
| rx_page_desc[i].rx_nxseq = 0; |
| for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { |
| *rx_page_desc[i].rx_page[j].write_offset_addr = 0; |
| rx_page_desc[i].rx_page[j].read_offset = 0; |
| } |
| } |
| } |
| |
| /** |
| * atl1e_free_ring_resources - Free Tx / RX descriptor Resources |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| */ |
| static void atl1e_free_ring_resources(struct atl1e_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| atl1e_clean_tx_ring(adapter); |
| atl1e_clean_rx_ring(adapter); |
| |
| if (adapter->ring_vir_addr) { |
| pci_free_consistent(pdev, adapter->ring_size, |
| adapter->ring_vir_addr, adapter->ring_dma); |
| adapter->ring_vir_addr = NULL; |
| } |
| |
| if (adapter->tx_ring.tx_buffer) { |
| kfree(adapter->tx_ring.tx_buffer); |
| adapter->tx_ring.tx_buffer = NULL; |
| } |
| } |
| |
| /** |
| * atl1e_setup_mem_resources - allocate Tx / RX descriptor resources |
| * @adapter: board private structure |
| * |
| * Return 0 on success, negative on failure |
| */ |
| static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct atl1e_tx_ring *tx_ring; |
| struct atl1e_rx_ring *rx_ring; |
| struct atl1e_rx_page_desc *rx_page_desc; |
| int size, i, j; |
| u32 offset = 0; |
| int err = 0; |
| |
| if (adapter->ring_vir_addr != NULL) |
| return 0; /* alloced already */ |
| |
| tx_ring = &adapter->tx_ring; |
| rx_ring = &adapter->rx_ring; |
| |
| /* real ring DMA buffer */ |
| |
| size = adapter->ring_size; |
| adapter->ring_vir_addr = pci_zalloc_consistent(pdev, adapter->ring_size, |
| &adapter->ring_dma); |
| if (adapter->ring_vir_addr == NULL) { |
| netdev_err(adapter->netdev, |
| "pci_alloc_consistent failed, size = D%d\n", size); |
| return -ENOMEM; |
| } |
| |
| rx_page_desc = rx_ring->rx_page_desc; |
| |
| /* Init TPD Ring */ |
| tx_ring->dma = roundup(adapter->ring_dma, 8); |
| offset = tx_ring->dma - adapter->ring_dma; |
| tx_ring->desc = adapter->ring_vir_addr + offset; |
| size = sizeof(struct atl1e_tx_buffer) * (tx_ring->count); |
| tx_ring->tx_buffer = kzalloc(size, GFP_KERNEL); |
| if (tx_ring->tx_buffer == NULL) { |
| err = -ENOMEM; |
| goto failed; |
| } |
| |
| /* Init RXF-Pages */ |
| offset += (sizeof(struct atl1e_tpd_desc) * tx_ring->count); |
| offset = roundup(offset, 32); |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { |
| rx_page_desc[i].rx_page[j].dma = |
| adapter->ring_dma + offset; |
| rx_page_desc[i].rx_page[j].addr = |
| adapter->ring_vir_addr + offset; |
| offset += rx_ring->real_page_size; |
| } |
| } |
| |
| /* Init CMB dma address */ |
| tx_ring->cmb_dma = adapter->ring_dma + offset; |
| tx_ring->cmb = adapter->ring_vir_addr + offset; |
| offset += sizeof(u32); |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { |
| rx_page_desc[i].rx_page[j].write_offset_dma = |
| adapter->ring_dma + offset; |
| rx_page_desc[i].rx_page[j].write_offset_addr = |
| adapter->ring_vir_addr + offset; |
| offset += sizeof(u32); |
| } |
| } |
| |
| if (unlikely(offset > adapter->ring_size)) { |
| netdev_err(adapter->netdev, "offset(%d) > ring size(%d) !!\n", |
| offset, adapter->ring_size); |
| err = -1; |
| goto failed; |
| } |
| |
| return 0; |
| failed: |
| if (adapter->ring_vir_addr != NULL) { |
| pci_free_consistent(pdev, adapter->ring_size, |
| adapter->ring_vir_addr, adapter->ring_dma); |
| adapter->ring_vir_addr = NULL; |
| } |
| return err; |
| } |
| |
| static inline void atl1e_configure_des_ring(struct atl1e_adapter *adapter) |
| { |
| |
| struct atl1e_hw *hw = &adapter->hw; |
| struct atl1e_rx_ring *rx_ring = &adapter->rx_ring; |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| struct atl1e_rx_page_desc *rx_page_desc = NULL; |
| int i, j; |
| |
| AT_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI, |
| (u32)((adapter->ring_dma & AT_DMA_HI_ADDR_MASK) >> 32)); |
| AT_WRITE_REG(hw, REG_TPD_BASE_ADDR_LO, |
| (u32)((tx_ring->dma) & AT_DMA_LO_ADDR_MASK)); |
| AT_WRITE_REG(hw, REG_TPD_RING_SIZE, (u16)(tx_ring->count)); |
| AT_WRITE_REG(hw, REG_HOST_TX_CMB_LO, |
| (u32)((tx_ring->cmb_dma) & AT_DMA_LO_ADDR_MASK)); |
| |
| rx_page_desc = rx_ring->rx_page_desc; |
| /* RXF Page Physical address / Page Length */ |
| for (i = 0; i < AT_MAX_RECEIVE_QUEUE; i++) { |
| AT_WRITE_REG(hw, atl1e_rx_page_hi_addr_regs[i], |
| (u32)((adapter->ring_dma & |
| AT_DMA_HI_ADDR_MASK) >> 32)); |
| for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { |
| u32 page_phy_addr; |
| u32 offset_phy_addr; |
| |
| page_phy_addr = rx_page_desc[i].rx_page[j].dma; |
| offset_phy_addr = |
| rx_page_desc[i].rx_page[j].write_offset_dma; |
| |
| AT_WRITE_REG(hw, atl1e_rx_page_lo_addr_regs[i][j], |
| page_phy_addr & AT_DMA_LO_ADDR_MASK); |
| AT_WRITE_REG(hw, atl1e_rx_page_write_offset_regs[i][j], |
| offset_phy_addr & AT_DMA_LO_ADDR_MASK); |
| AT_WRITE_REGB(hw, atl1e_rx_page_vld_regs[i][j], 1); |
| } |
| } |
| /* Page Length */ |
| AT_WRITE_REG(hw, REG_HOST_RXFPAGE_SIZE, rx_ring->page_size); |
| /* Load all of base address above */ |
| AT_WRITE_REG(hw, REG_LOAD_PTR, 1); |
| } |
| |
| static inline void atl1e_configure_tx(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_hw *hw = &adapter->hw; |
| u32 dev_ctrl_data = 0; |
| u32 max_pay_load = 0; |
| u32 jumbo_thresh = 0; |
| u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */ |
| |
| /* configure TXQ param */ |
| if (hw->nic_type != athr_l2e_revB) { |
| extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN; |
| if (hw->max_frame_size <= 1500) { |
| jumbo_thresh = hw->max_frame_size + extra_size; |
| } else if (hw->max_frame_size < 6*1024) { |
| jumbo_thresh = |
| (hw->max_frame_size + extra_size) * 2 / 3; |
| } else { |
| jumbo_thresh = (hw->max_frame_size + extra_size) / 2; |
| } |
| AT_WRITE_REG(hw, REG_TX_EARLY_TH, (jumbo_thresh + 7) >> 3); |
| } |
| |
| dev_ctrl_data = AT_READ_REG(hw, REG_DEVICE_CTRL); |
| |
| max_pay_load = ((dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT)) & |
| DEVICE_CTRL_MAX_PAYLOAD_MASK; |
| |
| hw->dmaw_block = min_t(u32, max_pay_load, hw->dmaw_block); |
| |
| max_pay_load = ((dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT)) & |
| DEVICE_CTRL_MAX_RREQ_SZ_MASK; |
| hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block); |
| |
| if (hw->nic_type != athr_l2e_revB) |
| AT_WRITE_REGW(hw, REG_TXQ_CTRL + 2, |
| atl1e_pay_load_size[hw->dmar_block]); |
| /* enable TXQ */ |
| AT_WRITE_REGW(hw, REG_TXQ_CTRL, |
| (((u16)hw->tpd_burst & TXQ_CTRL_NUM_TPD_BURST_MASK) |
| << TXQ_CTRL_NUM_TPD_BURST_SHIFT) |
| | TXQ_CTRL_ENH_MODE | TXQ_CTRL_EN); |
| } |
| |
| static inline void atl1e_configure_rx(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_hw *hw = &adapter->hw; |
| u32 rxf_len = 0; |
| u32 rxf_low = 0; |
| u32 rxf_high = 0; |
| u32 rxf_thresh_data = 0; |
| u32 rxq_ctrl_data = 0; |
| |
| if (hw->nic_type != athr_l2e_revB) { |
| AT_WRITE_REGW(hw, REG_RXQ_JMBOSZ_RRDTIM, |
| (u16)((hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) << |
| RXQ_JMBOSZ_TH_SHIFT | |
| (1 & RXQ_JMBO_LKAH_MASK) << |
| RXQ_JMBO_LKAH_SHIFT)); |
| |
| rxf_len = AT_READ_REG(hw, REG_SRAM_RXF_LEN); |
| rxf_high = rxf_len * 4 / 5; |
| rxf_low = rxf_len / 5; |
| rxf_thresh_data = ((rxf_high & RXQ_RXF_PAUSE_TH_HI_MASK) |
| << RXQ_RXF_PAUSE_TH_HI_SHIFT) | |
| ((rxf_low & RXQ_RXF_PAUSE_TH_LO_MASK) |
| << RXQ_RXF_PAUSE_TH_LO_SHIFT); |
| |
| AT_WRITE_REG(hw, REG_RXQ_RXF_PAUSE_THRESH, rxf_thresh_data); |
| } |
| |
| /* RRS */ |
| AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab); |
| AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu); |
| |
| if (hw->rrs_type & atl1e_rrs_ipv4) |
| rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4; |
| |
| if (hw->rrs_type & atl1e_rrs_ipv4_tcp) |
| rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4_TCP; |
| |
| if (hw->rrs_type & atl1e_rrs_ipv6) |
| rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6; |
| |
| if (hw->rrs_type & atl1e_rrs_ipv6_tcp) |
| rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6_TCP; |
| |
| if (hw->rrs_type != atl1e_rrs_disable) |
| rxq_ctrl_data |= |
| (RXQ_CTRL_HASH_ENABLE | RXQ_CTRL_RSS_MODE_MQUESINT); |
| |
| rxq_ctrl_data |= RXQ_CTRL_IPV6_XSUM_VERIFY_EN | RXQ_CTRL_PBA_ALIGN_32 | |
| RXQ_CTRL_CUT_THRU_EN | RXQ_CTRL_EN; |
| |
| AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data); |
| } |
| |
| static inline void atl1e_configure_dma(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_hw *hw = &adapter->hw; |
| u32 dma_ctrl_data = 0; |
| |
| dma_ctrl_data = DMA_CTRL_RXCMB_EN; |
| dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) |
| << DMA_CTRL_DMAR_BURST_LEN_SHIFT; |
| dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) |
| << DMA_CTRL_DMAW_BURST_LEN_SHIFT; |
| dma_ctrl_data |= DMA_CTRL_DMAR_REQ_PRI | DMA_CTRL_DMAR_OUT_ORDER; |
| dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK) |
| << DMA_CTRL_DMAR_DLY_CNT_SHIFT; |
| dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK) |
| << DMA_CTRL_DMAW_DLY_CNT_SHIFT; |
| |
| AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data); |
| } |
| |
| static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter) |
| { |
| u32 value; |
| struct atl1e_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| |
| /* Config MAC CTRL Register */ |
| value = MAC_CTRL_TX_EN | |
| MAC_CTRL_RX_EN ; |
| |
| if (FULL_DUPLEX == adapter->link_duplex) |
| value |= MAC_CTRL_DUPLX; |
| |
| value |= ((u32)((SPEED_1000 == adapter->link_speed) ? |
| MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << |
| MAC_CTRL_SPEED_SHIFT); |
| value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); |
| |
| value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); |
| value |= (((u32)adapter->hw.preamble_len & |
| MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); |
| |
| __atl1e_vlan_mode(netdev->features, &value); |
| |
| value |= MAC_CTRL_BC_EN; |
| if (netdev->flags & IFF_PROMISC) |
| value |= MAC_CTRL_PROMIS_EN; |
| if (netdev->flags & IFF_ALLMULTI) |
| value |= MAC_CTRL_MC_ALL_EN; |
| if (netdev->features & NETIF_F_RXALL) |
| value |= MAC_CTRL_DBG; |
| AT_WRITE_REG(hw, REG_MAC_CTRL, value); |
| } |
| |
| /** |
| * atl1e_configure - Configure Transmit&Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx /Rx unit of the MAC after a reset. |
| */ |
| static int atl1e_configure(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_hw *hw = &adapter->hw; |
| |
| u32 intr_status_data = 0; |
| |
| /* clear interrupt status */ |
| AT_WRITE_REG(hw, REG_ISR, ~0); |
| |
| /* 1. set MAC Address */ |
| atl1e_hw_set_mac_addr(hw); |
| |
| /* 2. Init the Multicast HASH table done by set_muti */ |
| |
| /* 3. Clear any WOL status */ |
| AT_WRITE_REG(hw, REG_WOL_CTRL, 0); |
| |
| /* 4. Descripter Ring BaseMem/Length/Read ptr/Write ptr |
| * TPD Ring/SMB/RXF0 Page CMBs, they use the same |
| * High 32bits memory */ |
| atl1e_configure_des_ring(adapter); |
| |
| /* 5. set Interrupt Moderator Timer */ |
| AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, hw->imt); |
| AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER2_INIT, hw->imt); |
| AT_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_LED_MODE | |
| MASTER_CTRL_ITIMER_EN | MASTER_CTRL_ITIMER2_EN); |
| |
| /* 6. rx/tx threshold to trig interrupt */ |
| AT_WRITE_REGW(hw, REG_TRIG_RRD_THRESH, hw->rrd_thresh); |
| AT_WRITE_REGW(hw, REG_TRIG_TPD_THRESH, hw->tpd_thresh); |
| AT_WRITE_REGW(hw, REG_TRIG_RXTIMER, hw->rx_count_down); |
| AT_WRITE_REGW(hw, REG_TRIG_TXTIMER, hw->tx_count_down); |
| |
| /* 7. set Interrupt Clear Timer */ |
| AT_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, hw->ict); |
| |
| /* 8. set MTU */ |
| AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN + |
| VLAN_HLEN + ETH_FCS_LEN); |
| |
| /* 9. config TXQ early tx threshold */ |
| atl1e_configure_tx(adapter); |
| |
| /* 10. config RXQ */ |
| atl1e_configure_rx(adapter); |
| |
| /* 11. config DMA Engine */ |
| atl1e_configure_dma(adapter); |
| |
| /* 12. smb timer to trig interrupt */ |
| AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, hw->smb_timer); |
| |
| intr_status_data = AT_READ_REG(hw, REG_ISR); |
| if (unlikely((intr_status_data & ISR_PHY_LINKDOWN) != 0)) { |
| netdev_err(adapter->netdev, |
| "atl1e_configure failed, PCIE phy link down\n"); |
| return -1; |
| } |
| |
| AT_WRITE_REG(hw, REG_ISR, 0x7fffffff); |
| return 0; |
| } |
| |
| /** |
| * atl1e_get_stats - Get System Network Statistics |
| * @netdev: network interface device structure |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are actually updated from the timer callback. |
| */ |
| static struct net_device_stats *atl1e_get_stats(struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| struct atl1e_hw_stats *hw_stats = &adapter->hw_stats; |
| struct net_device_stats *net_stats = &netdev->stats; |
| |
| net_stats->rx_bytes = hw_stats->rx_byte_cnt; |
| net_stats->tx_bytes = hw_stats->tx_byte_cnt; |
| net_stats->multicast = hw_stats->rx_mcast; |
| net_stats->collisions = hw_stats->tx_1_col + |
| hw_stats->tx_2_col + |
| hw_stats->tx_late_col + |
| hw_stats->tx_abort_col; |
| |
| net_stats->rx_errors = hw_stats->rx_frag + |
| hw_stats->rx_fcs_err + |
| hw_stats->rx_len_err + |
| hw_stats->rx_sz_ov + |
| hw_stats->rx_rrd_ov + |
| hw_stats->rx_align_err + |
| hw_stats->rx_rxf_ov; |
| |
| net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov; |
| net_stats->rx_length_errors = hw_stats->rx_len_err; |
| net_stats->rx_crc_errors = hw_stats->rx_fcs_err; |
| net_stats->rx_frame_errors = hw_stats->rx_align_err; |
| net_stats->rx_dropped = hw_stats->rx_rrd_ov; |
| |
| net_stats->tx_errors = hw_stats->tx_late_col + |
| hw_stats->tx_abort_col + |
| hw_stats->tx_underrun + |
| hw_stats->tx_trunc; |
| |
| net_stats->tx_fifo_errors = hw_stats->tx_underrun; |
| net_stats->tx_aborted_errors = hw_stats->tx_abort_col; |
| net_stats->tx_window_errors = hw_stats->tx_late_col; |
| |
| net_stats->rx_packets = hw_stats->rx_ok + net_stats->rx_errors; |
| net_stats->tx_packets = hw_stats->tx_ok + net_stats->tx_errors; |
| |
| return net_stats; |
| } |
| |
| static void atl1e_update_hw_stats(struct atl1e_adapter *adapter) |
| { |
| u16 hw_reg_addr = 0; |
| unsigned long *stats_item = NULL; |
| |
| /* update rx status */ |
| hw_reg_addr = REG_MAC_RX_STATUS_BIN; |
| stats_item = &adapter->hw_stats.rx_ok; |
| while (hw_reg_addr <= REG_MAC_RX_STATUS_END) { |
| *stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr); |
| stats_item++; |
| hw_reg_addr += 4; |
| } |
| /* update tx status */ |
| hw_reg_addr = REG_MAC_TX_STATUS_BIN; |
| stats_item = &adapter->hw_stats.tx_ok; |
| while (hw_reg_addr <= REG_MAC_TX_STATUS_END) { |
| *stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr); |
| stats_item++; |
| hw_reg_addr += 4; |
| } |
| } |
| |
| static inline void atl1e_clear_phy_int(struct atl1e_adapter *adapter) |
| { |
| u16 phy_data; |
| |
| spin_lock(&adapter->mdio_lock); |
| atl1e_read_phy_reg(&adapter->hw, MII_INT_STATUS, &phy_data); |
| spin_unlock(&adapter->mdio_lock); |
| } |
| |
| static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| struct atl1e_tx_buffer *tx_buffer = NULL; |
| u16 hw_next_to_clean = AT_READ_REGW(&adapter->hw, REG_TPD_CONS_IDX); |
| u16 next_to_clean = atomic_read(&tx_ring->next_to_clean); |
| |
| while (next_to_clean != hw_next_to_clean) { |
| tx_buffer = &tx_ring->tx_buffer[next_to_clean]; |
| if (tx_buffer->dma) { |
| if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE) |
| pci_unmap_single(adapter->pdev, tx_buffer->dma, |
| tx_buffer->length, PCI_DMA_TODEVICE); |
| else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE) |
| pci_unmap_page(adapter->pdev, tx_buffer->dma, |
| tx_buffer->length, PCI_DMA_TODEVICE); |
| tx_buffer->dma = 0; |
| } |
| |
| if (tx_buffer->skb) { |
| dev_kfree_skb_irq(tx_buffer->skb); |
| tx_buffer->skb = NULL; |
| } |
| |
| if (++next_to_clean == tx_ring->count) |
| next_to_clean = 0; |
| } |
| |
| atomic_set(&tx_ring->next_to_clean, next_to_clean); |
| |
| if (netif_queue_stopped(adapter->netdev) && |
| netif_carrier_ok(adapter->netdev)) { |
| netif_wake_queue(adapter->netdev); |
| } |
| |
| return true; |
| } |
| |
| /** |
| * atl1e_intr - Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| */ |
| static irqreturn_t atl1e_intr(int irq, void *data) |
| { |
| struct net_device *netdev = data; |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| struct atl1e_hw *hw = &adapter->hw; |
| int max_ints = AT_MAX_INT_WORK; |
| int handled = IRQ_NONE; |
| u32 status; |
| |
| do { |
| status = AT_READ_REG(hw, REG_ISR); |
| if ((status & IMR_NORMAL_MASK) == 0 || |
| (status & ISR_DIS_INT) != 0) { |
| if (max_ints != AT_MAX_INT_WORK) |
| handled = IRQ_HANDLED; |
| break; |
| } |
| /* link event */ |
| if (status & ISR_GPHY) |
| atl1e_clear_phy_int(adapter); |
| /* Ack ISR */ |
| AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); |
| |
| handled = IRQ_HANDLED; |
| /* check if PCIE PHY Link down */ |
| if (status & ISR_PHY_LINKDOWN) { |
| netdev_err(adapter->netdev, |
| "pcie phy linkdown %x\n", status); |
| if (netif_running(adapter->netdev)) { |
| /* reset MAC */ |
| atl1e_irq_reset(adapter); |
| schedule_work(&adapter->reset_task); |
| break; |
| } |
| } |
| |
| /* check if DMA read/write error */ |
| if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { |
| netdev_err(adapter->netdev, |
| "PCIE DMA RW error (status = 0x%x)\n", |
| status); |
| atl1e_irq_reset(adapter); |
| schedule_work(&adapter->reset_task); |
| break; |
| } |
| |
| if (status & ISR_SMB) |
| atl1e_update_hw_stats(adapter); |
| |
| /* link event */ |
| if (status & (ISR_GPHY | ISR_MANUAL)) { |
| netdev->stats.tx_carrier_errors++; |
| atl1e_link_chg_event(adapter); |
| break; |
| } |
| |
| /* transmit event */ |
| if (status & ISR_TX_EVENT) |
| atl1e_clean_tx_irq(adapter); |
| |
| if (status & ISR_RX_EVENT) { |
| /* |
| * disable rx interrupts, without |
| * the synchronize_irq bit |
| */ |
| AT_WRITE_REG(hw, REG_IMR, |
| IMR_NORMAL_MASK & ~ISR_RX_EVENT); |
| AT_WRITE_FLUSH(hw); |
| if (likely(napi_schedule_prep( |
| &adapter->napi))) |
| __napi_schedule(&adapter->napi); |
| } |
| } while (--max_ints > 0); |
| /* re-enable Interrupt*/ |
| AT_WRITE_REG(&adapter->hw, REG_ISR, 0); |
| |
| return handled; |
| } |
| |
| static inline void atl1e_rx_checksum(struct atl1e_adapter *adapter, |
| struct sk_buff *skb, struct atl1e_recv_ret_status *prrs) |
| { |
| u8 *packet = (u8 *)(prrs + 1); |
| struct iphdr *iph; |
| u16 head_len = ETH_HLEN; |
| u16 pkt_flags; |
| u16 err_flags; |
| |
| skb_checksum_none_assert(skb); |
| pkt_flags = prrs->pkt_flag; |
| err_flags = prrs->err_flag; |
| if (((pkt_flags & RRS_IS_IPV4) || (pkt_flags & RRS_IS_IPV6)) && |
| ((pkt_flags & RRS_IS_TCP) || (pkt_flags & RRS_IS_UDP))) { |
| if (pkt_flags & RRS_IS_IPV4) { |
| if (pkt_flags & RRS_IS_802_3) |
| head_len += 8; |
| iph = (struct iphdr *) (packet + head_len); |
| if (iph->frag_off != 0 && !(pkt_flags & RRS_IS_IP_DF)) |
| goto hw_xsum; |
| } |
| if (!(err_flags & (RRS_ERR_IP_CSUM | RRS_ERR_L4_CSUM))) { |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| return; |
| } |
| } |
| |
| hw_xsum : |
| return; |
| } |
| |
| static struct atl1e_rx_page *atl1e_get_rx_page(struct atl1e_adapter *adapter, |
| u8 que) |
| { |
| struct atl1e_rx_page_desc *rx_page_desc = |
| (struct atl1e_rx_page_desc *) adapter->rx_ring.rx_page_desc; |
| u8 rx_using = rx_page_desc[que].rx_using; |
| |
| return &(rx_page_desc[que].rx_page[rx_using]); |
| } |
| |
| static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que, |
| int *work_done, int work_to_do) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct atl1e_rx_ring *rx_ring = &adapter->rx_ring; |
| struct atl1e_rx_page_desc *rx_page_desc = |
| (struct atl1e_rx_page_desc *) rx_ring->rx_page_desc; |
| struct sk_buff *skb = NULL; |
| struct atl1e_rx_page *rx_page = atl1e_get_rx_page(adapter, que); |
| u32 packet_size, write_offset; |
| struct atl1e_recv_ret_status *prrs; |
| |
| write_offset = *(rx_page->write_offset_addr); |
| if (likely(rx_page->read_offset < write_offset)) { |
| do { |
| if (*work_done >= work_to_do) |
| break; |
| (*work_done)++; |
| /* get new packet's rrs */ |
| prrs = (struct atl1e_recv_ret_status *) (rx_page->addr + |
| rx_page->read_offset); |
| /* check sequence number */ |
| if (prrs->seq_num != rx_page_desc[que].rx_nxseq) { |
| netdev_err(netdev, |
| "rx sequence number error (rx=%d) (expect=%d)\n", |
| prrs->seq_num, |
| rx_page_desc[que].rx_nxseq); |
| rx_page_desc[que].rx_nxseq++; |
| /* just for debug use */ |
| AT_WRITE_REG(&adapter->hw, REG_DEBUG_DATA0, |
| (((u32)prrs->seq_num) << 16) | |
| rx_page_desc[que].rx_nxseq); |
| goto fatal_err; |
| } |
| rx_page_desc[que].rx_nxseq++; |
| |
| /* error packet */ |
| if ((prrs->pkt_flag & RRS_IS_ERR_FRAME) && |
| !(netdev->features & NETIF_F_RXALL)) { |
| if (prrs->err_flag & (RRS_ERR_BAD_CRC | |
| RRS_ERR_DRIBBLE | RRS_ERR_CODE | |
| RRS_ERR_TRUNC)) { |
| /* hardware error, discard this packet*/ |
| netdev_err(netdev, |
| "rx packet desc error %x\n", |
| *((u32 *)prrs + 1)); |
| goto skip_pkt; |
| } |
| } |
| |
| packet_size = ((prrs->word1 >> RRS_PKT_SIZE_SHIFT) & |
| RRS_PKT_SIZE_MASK); |
| if (likely(!(netdev->features & NETIF_F_RXFCS))) |
| packet_size -= 4; /* CRC */ |
| |
| skb = netdev_alloc_skb_ip_align(netdev, packet_size); |
| if (skb == NULL) |
| goto skip_pkt; |
| |
| memcpy(skb->data, (u8 *)(prrs + 1), packet_size); |
| skb_put(skb, packet_size); |
| skb->protocol = eth_type_trans(skb, netdev); |
| atl1e_rx_checksum(adapter, skb, prrs); |
| |
| if (prrs->pkt_flag & RRS_IS_VLAN_TAG) { |
| u16 vlan_tag = (prrs->vtag >> 4) | |
| ((prrs->vtag & 7) << 13) | |
| ((prrs->vtag & 8) << 9); |
| netdev_dbg(netdev, |
| "RXD VLAN TAG<RRD>=0x%04x\n", |
| prrs->vtag); |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); |
| } |
| napi_gro_receive(&adapter->napi, skb); |
| |
| skip_pkt: |
| /* skip current packet whether it's ok or not. */ |
| rx_page->read_offset += |
| (((u32)((prrs->word1 >> RRS_PKT_SIZE_SHIFT) & |
| RRS_PKT_SIZE_MASK) + |
| sizeof(struct atl1e_recv_ret_status) + 31) & |
| 0xFFFFFFE0); |
| |
| if (rx_page->read_offset >= rx_ring->page_size) { |
| /* mark this page clean */ |
| u16 reg_addr; |
| u8 rx_using; |
| |
| rx_page->read_offset = |
| *(rx_page->write_offset_addr) = 0; |
| rx_using = rx_page_desc[que].rx_using; |
| reg_addr = |
| atl1e_rx_page_vld_regs[que][rx_using]; |
| AT_WRITE_REGB(&adapter->hw, reg_addr, 1); |
| rx_page_desc[que].rx_using ^= 1; |
| rx_page = atl1e_get_rx_page(adapter, que); |
| } |
| write_offset = *(rx_page->write_offset_addr); |
| } while (rx_page->read_offset < write_offset); |
| } |
| |
| return; |
| |
| fatal_err: |
| if (!test_bit(__AT_DOWN, &adapter->flags)) |
| schedule_work(&adapter->reset_task); |
| } |
| |
| /** |
| * atl1e_clean - NAPI Rx polling callback |
| */ |
| static int atl1e_clean(struct napi_struct *napi, int budget) |
| { |
| struct atl1e_adapter *adapter = |
| container_of(napi, struct atl1e_adapter, napi); |
| u32 imr_data; |
| int work_done = 0; |
| |
| /* Keep link state information with original netdev */ |
| if (!netif_carrier_ok(adapter->netdev)) |
| goto quit_polling; |
| |
| atl1e_clean_rx_irq(adapter, 0, &work_done, budget); |
| |
| /* If no Tx and not enough Rx work done, exit the polling mode */ |
| if (work_done < budget) { |
| quit_polling: |
| napi_complete_done(napi, work_done); |
| imr_data = AT_READ_REG(&adapter->hw, REG_IMR); |
| AT_WRITE_REG(&adapter->hw, REG_IMR, imr_data | ISR_RX_EVENT); |
| /* test debug */ |
| if (test_bit(__AT_DOWN, &adapter->flags)) { |
| atomic_dec(&adapter->irq_sem); |
| netdev_err(adapter->netdev, |
| "atl1e_clean is called when AT_DOWN\n"); |
| } |
| /* reenable RX intr */ |
| /*atl1e_irq_enable(adapter); */ |
| |
| } |
| return work_done; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| |
| /* |
| * Polling 'interrupt' - used by things like netconsole to send skbs |
| * without having to re-enable interrupts. It's not called while |
| * the interrupt routine is executing. |
| */ |
| static void atl1e_netpoll(struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| disable_irq(adapter->pdev->irq); |
| atl1e_intr(adapter->pdev->irq, netdev); |
| enable_irq(adapter->pdev->irq); |
| } |
| #endif |
| |
| static inline u16 atl1e_tpd_avail(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| u16 next_to_use = 0; |
| u16 next_to_clean = 0; |
| |
| next_to_clean = atomic_read(&tx_ring->next_to_clean); |
| next_to_use = tx_ring->next_to_use; |
| |
| return (u16)(next_to_clean > next_to_use) ? |
| (next_to_clean - next_to_use - 1) : |
| (tx_ring->count + next_to_clean - next_to_use - 1); |
| } |
| |
| /* |
| * get next usable tpd |
| * Note: should call atl1e_tdp_avail to make sure |
| * there is enough tpd to use |
| */ |
| static struct atl1e_tpd_desc *atl1e_get_tpd(struct atl1e_adapter *adapter) |
| { |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| u16 next_to_use = 0; |
| |
| next_to_use = tx_ring->next_to_use; |
| if (++tx_ring->next_to_use == tx_ring->count) |
| tx_ring->next_to_use = 0; |
| |
| memset(&tx_ring->desc[next_to_use], 0, sizeof(struct atl1e_tpd_desc)); |
| return &tx_ring->desc[next_to_use]; |
| } |
| |
| static struct atl1e_tx_buffer * |
| atl1e_get_tx_buffer(struct atl1e_adapter *adapter, struct atl1e_tpd_desc *tpd) |
| { |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| |
| return &tx_ring->tx_buffer[tpd - tx_ring->desc]; |
| } |
| |
| /* Calculate the transmit packet descript needed*/ |
| static u16 atl1e_cal_tdp_req(const struct sk_buff *skb) |
| { |
| int i = 0; |
| u16 tpd_req = 1; |
| u16 fg_size = 0; |
| u16 proto_hdr_len = 0; |
| |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
| fg_size = skb_frag_size(&skb_shinfo(skb)->frags[i]); |
| tpd_req += ((fg_size + MAX_TX_BUF_LEN - 1) >> MAX_TX_BUF_SHIFT); |
| } |
| |
| if (skb_is_gso(skb)) { |
| if (skb->protocol == htons(ETH_P_IP) || |
| (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6)) { |
| proto_hdr_len = skb_transport_offset(skb) + |
| tcp_hdrlen(skb); |
| if (proto_hdr_len < skb_headlen(skb)) { |
| tpd_req += ((skb_headlen(skb) - proto_hdr_len + |
| MAX_TX_BUF_LEN - 1) >> |
| MAX_TX_BUF_SHIFT); |
| } |
| } |
| |
| } |
| return tpd_req; |
| } |
| |
| static int atl1e_tso_csum(struct atl1e_adapter *adapter, |
| struct sk_buff *skb, struct atl1e_tpd_desc *tpd) |
| { |
| unsigned short offload_type; |
| u8 hdr_len; |
| u32 real_len; |
| |
| if (skb_is_gso(skb)) { |
| int err; |
| |
| err = skb_cow_head(skb, 0); |
| if (err < 0) |
| return err; |
| |
| offload_type = skb_shinfo(skb)->gso_type; |
| |
| if (offload_type & SKB_GSO_TCPV4) { |
| real_len = (((unsigned char *)ip_hdr(skb) - skb->data) |
| + ntohs(ip_hdr(skb)->tot_len)); |
| |
| if (real_len < skb->len) |
| pskb_trim(skb, real_len); |
| |
| hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); |
| if (unlikely(skb->len == hdr_len)) { |
| /* only xsum need */ |
| netdev_warn(adapter->netdev, |
| "IPV4 tso with zero data??\n"); |
| goto check_sum; |
| } else { |
| ip_hdr(skb)->check = 0; |
| ip_hdr(skb)->tot_len = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic( |
| ip_hdr(skb)->saddr, |
| ip_hdr(skb)->daddr, |
| 0, IPPROTO_TCP, 0); |
| tpd->word3 |= (ip_hdr(skb)->ihl & |
| TDP_V4_IPHL_MASK) << |
| TPD_V4_IPHL_SHIFT; |
| tpd->word3 |= ((tcp_hdrlen(skb) >> 2) & |
| TPD_TCPHDRLEN_MASK) << |
| TPD_TCPHDRLEN_SHIFT; |
| tpd->word3 |= ((skb_shinfo(skb)->gso_size) & |
| TPD_MSS_MASK) << TPD_MSS_SHIFT; |
| tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; |
| } |
| return 0; |
| } |
| } |
| |
| check_sum: |
| if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
| u8 css, cso; |
| |
| cso = skb_checksum_start_offset(skb); |
| if (unlikely(cso & 0x1)) { |
| netdev_err(adapter->netdev, |
| "payload offset should not ant event number\n"); |
| return -1; |
| } else { |
| css = cso + skb->csum_offset; |
| tpd->word3 |= (cso & TPD_PLOADOFFSET_MASK) << |
| TPD_PLOADOFFSET_SHIFT; |
| tpd->word3 |= (css & TPD_CCSUMOFFSET_MASK) << |
| TPD_CCSUMOFFSET_SHIFT; |
| tpd->word3 |= 1 << TPD_CC_SEGMENT_EN_SHIFT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int atl1e_tx_map(struct atl1e_adapter *adapter, |
| struct sk_buff *skb, struct atl1e_tpd_desc *tpd) |
| { |
| struct atl1e_tpd_desc *use_tpd = NULL; |
| struct atl1e_tx_buffer *tx_buffer = NULL; |
| u16 buf_len = skb_headlen(skb); |
| u16 map_len = 0; |
| u16 mapped_len = 0; |
| u16 hdr_len = 0; |
| u16 nr_frags; |
| u16 f; |
| int segment; |
| int ring_start = adapter->tx_ring.next_to_use; |
| int ring_end; |
| |
| nr_frags = skb_shinfo(skb)->nr_frags; |
| segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; |
| if (segment) { |
| /* TSO */ |
| map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
| use_tpd = tpd; |
| |
| tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd); |
| tx_buffer->length = map_len; |
| tx_buffer->dma = pci_map_single(adapter->pdev, |
| skb->data, hdr_len, PCI_DMA_TODEVICE); |
| if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) |
| return -ENOSPC; |
| |
| ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE); |
| mapped_len += map_len; |
| use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma); |
| use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) | |
| ((cpu_to_le32(tx_buffer->length) & |
| TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT); |
| } |
| |
| while (mapped_len < buf_len) { |
| /* mapped_len == 0, means we should use the first tpd, |
| which is given by caller */ |
| if (mapped_len == 0) { |
| use_tpd = tpd; |
| } else { |
| use_tpd = atl1e_get_tpd(adapter); |
| memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc)); |
| } |
| tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd); |
| tx_buffer->skb = NULL; |
| |
| tx_buffer->length = map_len = |
| ((buf_len - mapped_len) >= MAX_TX_BUF_LEN) ? |
| MAX_TX_BUF_LEN : (buf_len - mapped_len); |
| tx_buffer->dma = |
| pci_map_single(adapter->pdev, skb->data + mapped_len, |
| map_len, PCI_DMA_TODEVICE); |
| |
| if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) { |
| /* We need to unwind the mappings we've done */ |
| ring_end = adapter->tx_ring.next_to_use; |
| adapter->tx_ring.next_to_use = ring_start; |
| while (adapter->tx_ring.next_to_use != ring_end) { |
| tpd = atl1e_get_tpd(adapter); |
| tx_buffer = atl1e_get_tx_buffer(adapter, tpd); |
| pci_unmap_single(adapter->pdev, tx_buffer->dma, |
| tx_buffer->length, PCI_DMA_TODEVICE); |
| } |
| /* Reset the tx rings next pointer */ |
| adapter->tx_ring.next_to_use = ring_start; |
| return -ENOSPC; |
| } |
| |
| ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE); |
| mapped_len += map_len; |
| use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma); |
| use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) | |
| ((cpu_to_le32(tx_buffer->length) & |
| TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT); |
| } |
| |
| for (f = 0; f < nr_frags; f++) { |
| const struct skb_frag_struct *frag; |
| u16 i; |
| u16 seg_num; |
| |
| frag = &skb_shinfo(skb)->frags[f]; |
| buf_len = skb_frag_size(frag); |
| |
| seg_num = (buf_len + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN; |
| for (i = 0; i < seg_num; i++) { |
| use_tpd = atl1e_get_tpd(adapter); |
| memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc)); |
| |
| tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd); |
| BUG_ON(tx_buffer->skb); |
| |
| tx_buffer->skb = NULL; |
| tx_buffer->length = |
| (buf_len > MAX_TX_BUF_LEN) ? |
| MAX_TX_BUF_LEN : buf_len; |
| buf_len -= tx_buffer->length; |
| |
| tx_buffer->dma = skb_frag_dma_map(&adapter->pdev->dev, |
| frag, |
| (i * MAX_TX_BUF_LEN), |
| tx_buffer->length, |
| DMA_TO_DEVICE); |
| |
| if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) { |
| /* We need to unwind the mappings we've done */ |
| ring_end = adapter->tx_ring.next_to_use; |
| adapter->tx_ring.next_to_use = ring_start; |
| while (adapter->tx_ring.next_to_use != ring_end) { |
| tpd = atl1e_get_tpd(adapter); |
| tx_buffer = atl1e_get_tx_buffer(adapter, tpd); |
| dma_unmap_page(&adapter->pdev->dev, tx_buffer->dma, |
| tx_buffer->length, DMA_TO_DEVICE); |
| } |
| |
| /* Reset the ring next to use pointer */ |
| adapter->tx_ring.next_to_use = ring_start; |
| return -ENOSPC; |
| } |
| |
| ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE); |
| use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma); |
| use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) | |
| ((cpu_to_le32(tx_buffer->length) & |
| TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT); |
| } |
| } |
| |
| if ((tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK) |
| /* note this one is a tcp header */ |
| tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; |
| /* The last tpd */ |
| |
| use_tpd->word3 |= 1 << TPD_EOP_SHIFT; |
| /* The last buffer info contain the skb address, |
| so it will be free after unmap */ |
| tx_buffer->skb = skb; |
| return 0; |
| } |
| |
| static void atl1e_tx_queue(struct atl1e_adapter *adapter, u16 count, |
| struct atl1e_tpd_desc *tpd) |
| { |
| struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; |
| /* Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). */ |
| wmb(); |
| AT_WRITE_REG(&adapter->hw, REG_MB_TPD_PROD_IDX, tx_ring->next_to_use); |
| } |
| |
| static netdev_tx_t atl1e_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| u16 tpd_req = 1; |
| struct atl1e_tpd_desc *tpd; |
| |
| if (test_bit(__AT_DOWN, &adapter->flags)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| if (unlikely(skb->len <= 0)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| tpd_req = atl1e_cal_tdp_req(skb); |
| |
| if (atl1e_tpd_avail(adapter) < tpd_req) { |
| /* no enough descriptor, just stop queue */ |
| netif_stop_queue(netdev); |
| return NETDEV_TX_BUSY; |
| } |
| |
| tpd = atl1e_get_tpd(adapter); |
| |
| if (skb_vlan_tag_present(skb)) { |
| u16 vlan_tag = skb_vlan_tag_get(skb); |
| u16 atl1e_vlan_tag; |
| |
| tpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; |
| AT_VLAN_TAG_TO_TPD_TAG(vlan_tag, atl1e_vlan_tag); |
| tpd->word2 |= (atl1e_vlan_tag & TPD_VLANTAG_MASK) << |
| TPD_VLAN_SHIFT; |
| } |
| |
| if (skb->protocol == htons(ETH_P_8021Q)) |
| tpd->word3 |= 1 << TPD_VL_TAGGED_SHIFT; |
| |
| if (skb_network_offset(skb) != ETH_HLEN) |
| tpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; /* 802.3 frame */ |
| |
| /* do TSO and check sum */ |
| if (atl1e_tso_csum(adapter, skb, tpd) != 0) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| if (atl1e_tx_map(adapter, skb, tpd)) { |
| dev_kfree_skb_any(skb); |
| goto out; |
| } |
| |
| atl1e_tx_queue(adapter, tpd_req, tpd); |
| out: |
| return NETDEV_TX_OK; |
| } |
| |
| static void atl1e_free_irq(struct atl1e_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| free_irq(adapter->pdev->irq, netdev); |
| } |
| |
| static int atl1e_request_irq(struct atl1e_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct net_device *netdev = adapter->netdev; |
| int err = 0; |
| |
| err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name, |
| netdev); |
| if (err) { |
| netdev_dbg(adapter->netdev, |
| "Unable to allocate interrupt Error: %d\n", err); |
| return err; |
| } |
| netdev_dbg(netdev, "atl1e_request_irq OK\n"); |
| return err; |
| } |
| |
| int atl1e_up(struct atl1e_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err = 0; |
| u32 val; |
| |
| /* hardware has been reset, we need to reload some things */ |
| err = atl1e_init_hw(&adapter->hw); |
| if (err) { |
| err = -EIO; |
| return err; |
| } |
| atl1e_init_ring_ptrs(adapter); |
| atl1e_set_multi(netdev); |
| atl1e_restore_vlan(adapter); |
| |
| if (atl1e_configure(adapter)) { |
| err = -EIO; |
| goto err_up; |
| } |
| |
| clear_bit(__AT_DOWN, &adapter->flags); |
| napi_enable(&adapter->napi); |
| atl1e_irq_enable(adapter); |
| val = AT_READ_REG(&adapter->hw, REG_MASTER_CTRL); |
| AT_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, |
| val | MASTER_CTRL_MANUAL_INT); |
| |
| err_up: |
| return err; |
| } |
| |
| void atl1e_down(struct atl1e_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| /* signal that we're down so the interrupt handler does not |
| * reschedule our watchdog timer */ |
| set_bit(__AT_DOWN, &adapter->flags); |
| |
| netif_stop_queue(netdev); |
| |
| /* reset MAC to disable all RX/TX */ |
| atl1e_reset_hw(&adapter->hw); |
| msleep(1); |
| |
| napi_disable(&adapter->napi); |
| atl1e_del_timer(adapter); |
| atl1e_irq_disable(adapter); |
| |
| netif_carrier_off(netdev); |
| adapter->link_speed = SPEED_0; |
| adapter->link_duplex = -1; |
| atl1e_clean_tx_ring(adapter); |
| atl1e_clean_rx_ring(adapter); |
| } |
| |
| /** |
| * atl1e_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| */ |
| static int atl1e_open(struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| int err; |
| |
| /* disallow open during test */ |
| if (test_bit(__AT_TESTING, &adapter->flags)) |
| return -EBUSY; |
| |
| /* allocate rx/tx dma buffer & descriptors */ |
| atl1e_init_ring_resources(adapter); |
| err = atl1e_setup_ring_resources(adapter); |
| if (unlikely(err)) |
| return err; |
| |
| err = atl1e_request_irq(adapter); |
| if (unlikely(err)) |
| goto err_req_irq; |
| |
| err = atl1e_up(adapter); |
| if (unlikely(err)) |
| goto err_up; |
| |
| return 0; |
| |
| err_up: |
| atl1e_free_irq(adapter); |
| err_req_irq: |
| atl1e_free_ring_resources(adapter); |
| atl1e_reset_hw(&adapter->hw); |
| |
| return err; |
| } |
| |
| /** |
| * atl1e_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| */ |
| static int atl1e_close(struct net_device *netdev) |
| { |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); |
| atl1e_down(adapter); |
| atl1e_free_irq(adapter); |
| atl1e_free_ring_resources(adapter); |
| |
| return 0; |
| } |
| |
| static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| struct atl1e_hw *hw = &adapter->hw; |
| u32 ctrl = 0; |
| u32 mac_ctrl_data = 0; |
| u32 wol_ctrl_data = 0; |
| u16 mii_advertise_data = 0; |
| u16 mii_bmsr_data = 0; |
| u16 mii_intr_status_data = 0; |
| u32 wufc = adapter->wol; |
| u32 i; |
| #ifdef CONFIG_PM |
| int retval = 0; |
| #endif |
| |
| if (netif_running(netdev)) { |
| WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); |
| atl1e_down(adapter); |
| } |
| netif_device_detach(netdev); |
| |
| #ifdef CONFIG_PM |
| retval = pci_save_state(pdev); |
| if (retval) |
| return retval; |
| #endif |
| |
| if (wufc) { |
| /* get link status */ |
| atl1e_read_phy_reg(hw, MII_BMSR, &mii_bmsr_data); |
| atl1e_read_phy_reg(hw, MII_BMSR, &mii_bmsr_data); |
| |
| mii_advertise_data = ADVERTISE_10HALF; |
| |
| if ((atl1e_write_phy_reg(hw, MII_CTRL1000, 0) != 0) || |
| (atl1e_write_phy_reg(hw, |
| MII_ADVERTISE, mii_advertise_data) != 0) || |
| (atl1e_phy_commit(hw)) != 0) { |
| netdev_dbg(adapter->netdev, "set phy register failed\n"); |
| goto wol_dis; |
| } |
| |
| hw->phy_configured = false; /* re-init PHY when resume */ |
| |
| /* turn on magic packet wol */ |
| if (wufc & AT_WUFC_MAG) |
| wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN; |
| |
| if (wufc & AT_WUFC_LNKC) { |
| /* if orignal link status is link, just wait for retrive link */ |
| if (mii_bmsr_data & BMSR_LSTATUS) { |
| for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { |
| msleep(100); |
| atl1e_read_phy_reg(hw, MII_BMSR, |
| &mii_bmsr_data); |
| if (mii_bmsr_data & BMSR_LSTATUS) |
| break; |
| } |
| |
| if ((mii_bmsr_data & BMSR_LSTATUS) == 0) |
| netdev_dbg(adapter->netdev, |
| "Link may change when suspend\n"); |
| } |
| wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; |
| /* only link up can wake up */ |
| if (atl1e_write_phy_reg(hw, MII_INT_CTRL, 0x400) != 0) { |
| netdev_dbg(adapter->netdev, |
| "read write phy register failed\n"); |
| goto wol_dis; |
| } |
| } |
| /* clear phy interrupt */ |
| atl1e_read_phy_reg(hw, MII_INT_STATUS, &mii_intr_status_data); |
| /* Config MAC Ctrl register */ |
| mac_ctrl_data = MAC_CTRL_RX_EN; |
| /* set to 10/100M halt duplex */ |
| mac_ctrl_data |= MAC_CTRL_SPEED_10_100 << MAC_CTRL_SPEED_SHIFT; |
| mac_ctrl_data |= (((u32)adapter->hw.preamble_len & |
| MAC_CTRL_PRMLEN_MASK) << |
| MAC_CTRL_PRMLEN_SHIFT); |
| |
| __atl1e_vlan_mode(netdev->features, &mac_ctrl_data); |
| |
| /* magic packet maybe Broadcast&multicast&Unicast frame */ |
| if (wufc & AT_WUFC_MAG) |
| mac_ctrl_data |= MAC_CTRL_BC_EN; |
| |
| netdev_dbg(adapter->netdev, "suspend MAC=0x%x\n", |
| mac_ctrl_data); |
| |
| AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); |
| AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); |
| /* pcie patch */ |
| ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC); |
| ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; |
| AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); |
| pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); |
| goto suspend_exit; |
| } |
| wol_dis: |
| |
| /* WOL disabled */ |
| AT_WRITE_REG(hw, REG_WOL_CTRL, 0); |
| |
| /* pcie patch */ |
| ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC); |
| ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; |
| AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); |
| |
| atl1e_force_ps(hw); |
| hw->phy_configured = false; /* re-init PHY when resume */ |
| |
| pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); |
| |
| suspend_exit: |
| |
| if (netif_running(netdev)) |
| atl1e_free_irq(adapter); |
| |
| pci_disable_device(pdev); |
| |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int atl1e_resume(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| u32 err; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| netdev_err(adapter->netdev, |
| "Cannot enable PCI device from suspend\n"); |
| return err; |
| } |
| |
| pci_set_master(pdev); |
| |
| AT_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */ |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); |
| |
| if (netif_running(netdev)) { |
| err = atl1e_request_irq(adapter); |
| if (err) |
| return err; |
| } |
| |
| atl1e_reset_hw(&adapter->hw); |
| |
| if (netif_running(netdev)) |
| atl1e_up(adapter); |
| |
| netif_device_attach(netdev); |
| |
| return 0; |
| } |
| #endif |
| |
| static void atl1e_shutdown(struct pci_dev *pdev) |
| { |
| atl1e_suspend(pdev, PMSG_SUSPEND); |
| } |
| |
| static const struct net_device_ops atl1e_netdev_ops = { |
| .ndo_open = atl1e_open, |
| .ndo_stop = atl1e_close, |
| .ndo_start_xmit = atl1e_xmit_frame, |
| .ndo_get_stats = atl1e_get_stats, |
| .ndo_set_rx_mode = atl1e_set_multi, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = atl1e_set_mac_addr, |
| .ndo_fix_features = atl1e_fix_features, |
| .ndo_set_features = atl1e_set_features, |
| .ndo_change_mtu = atl1e_change_mtu, |
| .ndo_do_ioctl = atl1e_ioctl, |
| .ndo_tx_timeout = atl1e_tx_timeout, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = atl1e_netpoll, |
| #endif |
| |
| }; |
| |
| static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) |
| { |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| pci_set_drvdata(pdev, netdev); |
| |
| netdev->netdev_ops = &atl1e_netdev_ops; |
| |
| netdev->watchdog_timeo = AT_TX_WATCHDOG; |
| /* MTU range: 42 - 8170 */ |
| netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); |
| netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - |
| (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); |
| atl1e_set_ethtool_ops(netdev); |
| |
| netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO | |
| NETIF_F_HW_VLAN_CTAG_RX; |
| netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_CTAG_TX; |
| /* not enabled by default */ |
| netdev->hw_features |= NETIF_F_RXALL | NETIF_F_RXFCS; |
| return 0; |
| } |
| |
| /** |
| * atl1e_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in atl1e_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * atl1e_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| */ |
| static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct atl1e_adapter *adapter = NULL; |
| static int cards_found; |
| |
| int err = 0; |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "cannot enable PCI device\n"); |
| return err; |
| } |
| |
| /* |
| * The atl1e chip can DMA to 64-bit addresses, but it uses a single |
| * shared register for the high 32 bits, so only a single, aligned, |
| * 4 GB physical address range can be used at a time. |
| * |
| * Supporting 64-bit DMA on this hardware is more trouble than it's |
| * worth. It is far easier to limit to 32-bit DMA than update |
| * various kernel subsystems to support the mechanics required by a |
| * fixed-high-32-bit system. |
| */ |
| if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) || |
| (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) { |
| dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); |
| goto err_dma; |
| } |
| |
| err = pci_request_regions(pdev, atl1e_driver_name); |
| if (err) { |
| dev_err(&pdev->dev, "cannot obtain PCI resources\n"); |
| goto err_pci_reg; |
| } |
| |
| pci_set_master(pdev); |
| |
| netdev = alloc_etherdev(sizeof(struct atl1e_adapter)); |
| if (netdev == NULL) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| |
| err = atl1e_init_netdev(netdev, pdev); |
| if (err) { |
| netdev_err(netdev, "init netdevice failed\n"); |
| goto err_init_netdev; |
| } |
| adapter = netdev_priv(netdev); |
| adapter->bd_number = cards_found; |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| adapter->hw.adapter = adapter; |
| adapter->hw.hw_addr = pci_iomap(pdev, BAR_0, 0); |
| if (!adapter->hw.hw_addr) { |
| err = -EIO; |
| netdev_err(netdev, "cannot map device registers\n"); |
| goto err_ioremap; |
| } |
| |
| /* init mii data */ |
| adapter->mii.dev = netdev; |
| adapter->mii.mdio_read = atl1e_mdio_read; |
| adapter->mii.mdio_write = atl1e_mdio_write; |
| adapter->mii.phy_id_mask = 0x1f; |
| adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK; |
| |
| netif_napi_add(netdev, &adapter->napi, atl1e_clean, 64); |
| |
| timer_setup(&adapter->phy_config_timer, atl1e_phy_config, 0); |
| |
| /* get user settings */ |
| atl1e_check_options(adapter); |
| /* |
| * Mark all PCI regions associated with PCI device |
| * pdev as being reserved by owner atl1e_driver_name |
| * Enables bus-mastering on the device and calls |
| * pcibios_set_master to do the needed arch specific settings |
| */ |
| atl1e_setup_pcicmd(pdev); |
| /* setup the private structure */ |
| err = atl1e_sw_init(adapter); |
| if (err) { |
| netdev_err(netdev, "net device private data init failed\n"); |
| goto err_sw_init; |
| } |
| |
| /* Init GPHY as early as possible due to power saving issue */ |
| atl1e_phy_init(&adapter->hw); |
| /* reset the controller to |
| * put the device in a known good starting state */ |
| err = atl1e_reset_hw(&adapter->hw); |
| if (err) { |
| err = -EIO; |
| goto err_reset; |
| } |
| |
| if (atl1e_read_mac_addr(&adapter->hw) != 0) { |
| err = -EIO; |
| netdev_err(netdev, "get mac address failed\n"); |
| goto err_eeprom; |
| } |
| |
| memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); |
| netdev_dbg(netdev, "mac address : %pM\n", adapter->hw.mac_addr); |
| |
| INIT_WORK(&adapter->reset_task, atl1e_reset_task); |
| INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task); |
| netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE); |
| err = register_netdev(netdev); |
| if (err) { |
| netdev_err(netdev, "register netdevice failed\n"); |
| goto err_register; |
| } |
| |
| /* assume we have no link for now */ |
| netif_stop_queue(netdev); |
| netif_carrier_off(netdev); |
| |
| cards_found++; |
| |
| return 0; |
| |
| err_reset: |
| err_register: |
| err_sw_init: |
| err_eeprom: |
| pci_iounmap(pdev, adapter->hw.hw_addr); |
| err_init_netdev: |
| err_ioremap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_regions(pdev); |
| err_pci_reg: |
| err_dma: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * atl1e_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * atl1e_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| */ |
| static void atl1e_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| /* |
| * flush_scheduled work may reschedule our watchdog task, so |
| * explicitly disable watchdog tasks from being rescheduled |
| */ |
| set_bit(__AT_DOWN, &adapter->flags); |
| |
| atl1e_del_timer(adapter); |
| atl1e_cancel_work(adapter); |
| |
| unregister_netdev(netdev); |
| atl1e_free_ring_resources(adapter); |
| atl1e_force_ps(&adapter->hw); |
| pci_iounmap(pdev, adapter->hw.hw_addr); |
| pci_release_regions(pdev); |
| free_netdev(netdev); |
| pci_disable_device(pdev); |
| } |
| |
| /** |
| * atl1e_io_error_detected - called when PCI error is detected |
| * @pdev: Pointer to PCI device |
| * @state: The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t |
| atl1e_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| netif_device_detach(netdev); |
| |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| if (netif_running(netdev)) |
| atl1e_down(adapter); |
| |
| pci_disable_device(pdev); |
| |
| /* Request a slot slot reset. */ |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * atl1e_io_slot_reset - called after the pci bus has been reset. |
| * @pdev: Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. Implementation |
| * resembles the first-half of the e1000_resume routine. |
| */ |
| static pci_ers_result_t atl1e_io_slot_reset(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| if (pci_enable_device(pdev)) { |
| netdev_err(adapter->netdev, |
| "Cannot re-enable PCI device after reset\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| pci_set_master(pdev); |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| atl1e_reset_hw(&adapter->hw); |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| /** |
| * atl1e_io_resume - called when traffic can start flowing again. |
| * @pdev: Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. Implementation resembles the |
| * second-half of the atl1e_resume routine. |
| */ |
| static void atl1e_io_resume(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct atl1e_adapter *adapter = netdev_priv(netdev); |
| |
| if (netif_running(netdev)) { |
| if (atl1e_up(adapter)) { |
| netdev_err(adapter->netdev, |
| "can't bring device back up after reset\n"); |
| return; |
| } |
| } |
| |
| netif_device_attach(netdev); |
| } |
| |
| static const struct pci_error_handlers atl1e_err_handler = { |
| .error_detected = atl1e_io_error_detected, |
| .slot_reset = atl1e_io_slot_reset, |
| .resume = atl1e_io_resume, |
| }; |
| |
| static struct pci_driver atl1e_driver = { |
| .name = atl1e_driver_name, |
| .id_table = atl1e_pci_tbl, |
| .probe = atl1e_probe, |
| .remove = atl1e_remove, |
| /* Power Management Hooks */ |
| #ifdef CONFIG_PM |
| .suspend = atl1e_suspend, |
| .resume = atl1e_resume, |
| #endif |
| .shutdown = atl1e_shutdown, |
| .err_handler = &atl1e_err_handler |
| }; |
| |
| module_pci_driver(atl1e_driver); |