| #include <linux/linkage.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/signal.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/timex.h> | 
 | #include <linux/random.h> | 
 | #include <linux/init.h> | 
 | #include <linux/kernel_stat.h> | 
 | #include <linux/syscore_ops.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/io.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #include <linux/atomic.h> | 
 | #include <asm/timer.h> | 
 | #include <asm/hw_irq.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/desc.h> | 
 | #include <asm/apic.h> | 
 | #include <asm/i8259.h> | 
 |  | 
 | /* | 
 |  * This is the 'legacy' 8259A Programmable Interrupt Controller, | 
 |  * present in the majority of PC/AT boxes. | 
 |  * plus some generic x86 specific things if generic specifics makes | 
 |  * any sense at all. | 
 |  */ | 
 | static void init_8259A(int auto_eoi); | 
 |  | 
 | static int i8259A_auto_eoi; | 
 | DEFINE_RAW_SPINLOCK(i8259A_lock); | 
 |  | 
 | /* | 
 |  * 8259A PIC functions to handle ISA devices: | 
 |  */ | 
 |  | 
 | /* | 
 |  * This contains the irq mask for both 8259A irq controllers, | 
 |  */ | 
 | unsigned int cached_irq_mask = 0xffff; | 
 |  | 
 | /* | 
 |  * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) | 
 |  * boards the timer interrupt is not really connected to any IO-APIC pin, | 
 |  * it's fed to the master 8259A's IR0 line only. | 
 |  * | 
 |  * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. | 
 |  * this 'mixed mode' IRQ handling costs nothing because it's only used | 
 |  * at IRQ setup time. | 
 |  */ | 
 | unsigned long io_apic_irqs; | 
 |  | 
 | static void mask_8259A_irq(unsigned int irq) | 
 | { | 
 | 	unsigned int mask = 1 << irq; | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 | 	cached_irq_mask |= mask; | 
 | 	if (irq & 8) | 
 | 		outb(cached_slave_mask, PIC_SLAVE_IMR); | 
 | 	else | 
 | 		outb(cached_master_mask, PIC_MASTER_IMR); | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | } | 
 |  | 
 | static void disable_8259A_irq(struct irq_data *data) | 
 | { | 
 | 	mask_8259A_irq(data->irq); | 
 | } | 
 |  | 
 | static void unmask_8259A_irq(unsigned int irq) | 
 | { | 
 | 	unsigned int mask = ~(1 << irq); | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 | 	cached_irq_mask &= mask; | 
 | 	if (irq & 8) | 
 | 		outb(cached_slave_mask, PIC_SLAVE_IMR); | 
 | 	else | 
 | 		outb(cached_master_mask, PIC_MASTER_IMR); | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | } | 
 |  | 
 | static void enable_8259A_irq(struct irq_data *data) | 
 | { | 
 | 	unmask_8259A_irq(data->irq); | 
 | } | 
 |  | 
 | static int i8259A_irq_pending(unsigned int irq) | 
 | { | 
 | 	unsigned int mask = 1<<irq; | 
 | 	unsigned long flags; | 
 | 	int ret; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 | 	if (irq < 8) | 
 | 		ret = inb(PIC_MASTER_CMD) & mask; | 
 | 	else | 
 | 		ret = inb(PIC_SLAVE_CMD) & (mask >> 8); | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void make_8259A_irq(unsigned int irq) | 
 | { | 
 | 	disable_irq_nosync(irq); | 
 | 	io_apic_irqs &= ~(1<<irq); | 
 | 	irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq); | 
 | 	enable_irq(irq); | 
 | } | 
 |  | 
 | /* | 
 |  * This function assumes to be called rarely. Switching between | 
 |  * 8259A registers is slow. | 
 |  * This has to be protected by the irq controller spinlock | 
 |  * before being called. | 
 |  */ | 
 | static inline int i8259A_irq_real(unsigned int irq) | 
 | { | 
 | 	int value; | 
 | 	int irqmask = 1<<irq; | 
 |  | 
 | 	if (irq < 8) { | 
 | 		outb(0x0B, PIC_MASTER_CMD);	/* ISR register */ | 
 | 		value = inb(PIC_MASTER_CMD) & irqmask; | 
 | 		outb(0x0A, PIC_MASTER_CMD);	/* back to the IRR register */ | 
 | 		return value; | 
 | 	} | 
 | 	outb(0x0B, PIC_SLAVE_CMD);	/* ISR register */ | 
 | 	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); | 
 | 	outb(0x0A, PIC_SLAVE_CMD);	/* back to the IRR register */ | 
 | 	return value; | 
 | } | 
 |  | 
 | /* | 
 |  * Careful! The 8259A is a fragile beast, it pretty | 
 |  * much _has_ to be done exactly like this (mask it | 
 |  * first, _then_ send the EOI, and the order of EOI | 
 |  * to the two 8259s is important! | 
 |  */ | 
 | static void mask_and_ack_8259A(struct irq_data *data) | 
 | { | 
 | 	unsigned int irq = data->irq; | 
 | 	unsigned int irqmask = 1 << irq; | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 | 	/* | 
 | 	 * Lightweight spurious IRQ detection. We do not want | 
 | 	 * to overdo spurious IRQ handling - it's usually a sign | 
 | 	 * of hardware problems, so we only do the checks we can | 
 | 	 * do without slowing down good hardware unnecessarily. | 
 | 	 * | 
 | 	 * Note that IRQ7 and IRQ15 (the two spurious IRQs | 
 | 	 * usually resulting from the 8259A-1|2 PICs) occur | 
 | 	 * even if the IRQ is masked in the 8259A. Thus we | 
 | 	 * can check spurious 8259A IRQs without doing the | 
 | 	 * quite slow i8259A_irq_real() call for every IRQ. | 
 | 	 * This does not cover 100% of spurious interrupts, | 
 | 	 * but should be enough to warn the user that there | 
 | 	 * is something bad going on ... | 
 | 	 */ | 
 | 	if (cached_irq_mask & irqmask) | 
 | 		goto spurious_8259A_irq; | 
 | 	cached_irq_mask |= irqmask; | 
 |  | 
 | handle_real_irq: | 
 | 	if (irq & 8) { | 
 | 		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */ | 
 | 		outb(cached_slave_mask, PIC_SLAVE_IMR); | 
 | 		/* 'Specific EOI' to slave */ | 
 | 		outb(0x60+(irq&7), PIC_SLAVE_CMD); | 
 | 		 /* 'Specific EOI' to master-IRQ2 */ | 
 | 		outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); | 
 | 	} else { | 
 | 		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */ | 
 | 		outb(cached_master_mask, PIC_MASTER_IMR); | 
 | 		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */ | 
 | 	} | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | 	return; | 
 |  | 
 | spurious_8259A_irq: | 
 | 	/* | 
 | 	 * this is the slow path - should happen rarely. | 
 | 	 */ | 
 | 	if (i8259A_irq_real(irq)) | 
 | 		/* | 
 | 		 * oops, the IRQ _is_ in service according to the | 
 | 		 * 8259A - not spurious, go handle it. | 
 | 		 */ | 
 | 		goto handle_real_irq; | 
 |  | 
 | 	{ | 
 | 		static int spurious_irq_mask; | 
 | 		/* | 
 | 		 * At this point we can be sure the IRQ is spurious, | 
 | 		 * lets ACK and report it. [once per IRQ] | 
 | 		 */ | 
 | 		if (!(spurious_irq_mask & irqmask)) { | 
 | 			printk(KERN_DEBUG | 
 | 			       "spurious 8259A interrupt: IRQ%d.\n", irq); | 
 | 			spurious_irq_mask |= irqmask; | 
 | 		} | 
 | 		atomic_inc(&irq_err_count); | 
 | 		/* | 
 | 		 * Theoretically we do not have to handle this IRQ, | 
 | 		 * but in Linux this does not cause problems and is | 
 | 		 * simpler for us. | 
 | 		 */ | 
 | 		goto handle_real_irq; | 
 | 	} | 
 | } | 
 |  | 
 | struct irq_chip i8259A_chip = { | 
 | 	.name		= "XT-PIC", | 
 | 	.irq_mask	= disable_8259A_irq, | 
 | 	.irq_disable	= disable_8259A_irq, | 
 | 	.irq_unmask	= enable_8259A_irq, | 
 | 	.irq_mask_ack	= mask_and_ack_8259A, | 
 | }; | 
 |  | 
 | static char irq_trigger[2]; | 
 | /** | 
 |  * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ | 
 |  */ | 
 | static void restore_ELCR(char *trigger) | 
 | { | 
 | 	outb(trigger[0], 0x4d0); | 
 | 	outb(trigger[1], 0x4d1); | 
 | } | 
 |  | 
 | static void save_ELCR(char *trigger) | 
 | { | 
 | 	/* IRQ 0,1,2,8,13 are marked as reserved */ | 
 | 	trigger[0] = inb(0x4d0) & 0xF8; | 
 | 	trigger[1] = inb(0x4d1) & 0xDE; | 
 | } | 
 |  | 
 | static void i8259A_resume(void) | 
 | { | 
 | 	init_8259A(i8259A_auto_eoi); | 
 | 	restore_ELCR(irq_trigger); | 
 | } | 
 |  | 
 | static int i8259A_suspend(void) | 
 | { | 
 | 	save_ELCR(irq_trigger); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void i8259A_shutdown(void) | 
 | { | 
 | 	/* Put the i8259A into a quiescent state that | 
 | 	 * the kernel initialization code can get it | 
 | 	 * out of. | 
 | 	 */ | 
 | 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */ | 
 | 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */ | 
 | } | 
 |  | 
 | static struct syscore_ops i8259_syscore_ops = { | 
 | 	.suspend = i8259A_suspend, | 
 | 	.resume = i8259A_resume, | 
 | 	.shutdown = i8259A_shutdown, | 
 | }; | 
 |  | 
 | static void mask_8259A(void) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 |  | 
 | 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */ | 
 | 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */ | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | } | 
 |  | 
 | static void unmask_8259A(void) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 |  | 
 | 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ | 
 | 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */ | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | } | 
 |  | 
 | static int probe_8259A(void) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned char probe_val = ~(1 << PIC_CASCADE_IR); | 
 | 	unsigned char new_val; | 
 | 	/* | 
 | 	 * Check to see if we have a PIC. | 
 | 	 * Mask all except the cascade and read | 
 | 	 * back the value we just wrote. If we don't | 
 | 	 * have a PIC, we will read 0xff as opposed to the | 
 | 	 * value we wrote. | 
 | 	 */ | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 |  | 
 | 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */ | 
 | 	outb(probe_val, PIC_MASTER_IMR); | 
 | 	new_val = inb(PIC_MASTER_IMR); | 
 | 	if (new_val != probe_val) { | 
 | 		printk(KERN_INFO "Using NULL legacy PIC\n"); | 
 | 		legacy_pic = &null_legacy_pic; | 
 | 	} | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | 	return nr_legacy_irqs(); | 
 | } | 
 |  | 
 | static void init_8259A(int auto_eoi) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	i8259A_auto_eoi = auto_eoi; | 
 |  | 
 | 	raw_spin_lock_irqsave(&i8259A_lock, flags); | 
 |  | 
 | 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */ | 
 |  | 
 | 	/* | 
 | 	 * outb_pic - this has to work on a wide range of PC hardware. | 
 | 	 */ | 
 | 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */ | 
 |  | 
 | 	/* ICW2: 8259A-1 IR0-7 mapped to ISA_IRQ_VECTOR(0) */ | 
 | 	outb_pic(ISA_IRQ_VECTOR(0), PIC_MASTER_IMR); | 
 |  | 
 | 	/* 8259A-1 (the master) has a slave on IR2 */ | 
 | 	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); | 
 |  | 
 | 	if (auto_eoi)	/* master does Auto EOI */ | 
 | 		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); | 
 | 	else		/* master expects normal EOI */ | 
 | 		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); | 
 |  | 
 | 	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */ | 
 |  | 
 | 	/* ICW2: 8259A-2 IR0-7 mapped to ISA_IRQ_VECTOR(8) */ | 
 | 	outb_pic(ISA_IRQ_VECTOR(8), PIC_SLAVE_IMR); | 
 | 	/* 8259A-2 is a slave on master's IR2 */ | 
 | 	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); | 
 | 	/* (slave's support for AEOI in flat mode is to be investigated) */ | 
 | 	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); | 
 |  | 
 | 	if (auto_eoi) | 
 | 		/* | 
 | 		 * In AEOI mode we just have to mask the interrupt | 
 | 		 * when acking. | 
 | 		 */ | 
 | 		i8259A_chip.irq_mask_ack = disable_8259A_irq; | 
 | 	else | 
 | 		i8259A_chip.irq_mask_ack = mask_and_ack_8259A; | 
 |  | 
 | 	udelay(100);		/* wait for 8259A to initialize */ | 
 |  | 
 | 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ | 
 | 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */ | 
 |  | 
 | 	raw_spin_unlock_irqrestore(&i8259A_lock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * make i8259 a driver so that we can select pic functions at run time. the goal | 
 |  * is to make x86 binary compatible among pc compatible and non-pc compatible | 
 |  * platforms, such as x86 MID. | 
 |  */ | 
 |  | 
 | static void legacy_pic_noop(void) { }; | 
 | static void legacy_pic_uint_noop(unsigned int unused) { }; | 
 | static void legacy_pic_int_noop(int unused) { }; | 
 | static int legacy_pic_irq_pending_noop(unsigned int irq) | 
 | { | 
 | 	return 0; | 
 | } | 
 | static int legacy_pic_probe(void) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct legacy_pic null_legacy_pic = { | 
 | 	.nr_legacy_irqs = 0, | 
 | 	.chip = &dummy_irq_chip, | 
 | 	.mask = legacy_pic_uint_noop, | 
 | 	.unmask = legacy_pic_uint_noop, | 
 | 	.mask_all = legacy_pic_noop, | 
 | 	.restore_mask = legacy_pic_noop, | 
 | 	.init = legacy_pic_int_noop, | 
 | 	.probe = legacy_pic_probe, | 
 | 	.irq_pending = legacy_pic_irq_pending_noop, | 
 | 	.make_irq = legacy_pic_uint_noop, | 
 | }; | 
 |  | 
 | struct legacy_pic default_legacy_pic = { | 
 | 	.nr_legacy_irqs = NR_IRQS_LEGACY, | 
 | 	.chip  = &i8259A_chip, | 
 | 	.mask = mask_8259A_irq, | 
 | 	.unmask = unmask_8259A_irq, | 
 | 	.mask_all = mask_8259A, | 
 | 	.restore_mask = unmask_8259A, | 
 | 	.init = init_8259A, | 
 | 	.probe = probe_8259A, | 
 | 	.irq_pending = i8259A_irq_pending, | 
 | 	.make_irq = make_8259A_irq, | 
 | }; | 
 |  | 
 | struct legacy_pic *legacy_pic = &default_legacy_pic; | 
 |  | 
 | static int __init i8259A_init_ops(void) | 
 | { | 
 | 	if (legacy_pic == &default_legacy_pic) | 
 | 		register_syscore_ops(&i8259_syscore_ops); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | device_initcall(i8259A_init_ops); |