| /* | |
| * OpenRISC irq.c | |
| * | |
| * Linux architectural port borrowing liberally from similar works of | |
| * others. All original copyrights apply as per the original source | |
| * declaration. | |
| * | |
| * Modifications for the OpenRISC architecture: | |
| * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/ptrace.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/of.h> | |
| #include <linux/ftrace.h> | |
| #include <linux/irq.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/irqflags.h> | |
| /* read interrupt enabled status */ | |
| unsigned long arch_local_save_flags(void) | |
| { | |
| return mfspr(SPR_SR) & (SPR_SR_IEE|SPR_SR_TEE); | |
| } | |
| EXPORT_SYMBOL(arch_local_save_flags); | |
| /* set interrupt enabled status */ | |
| void arch_local_irq_restore(unsigned long flags) | |
| { | |
| mtspr(SPR_SR, ((mfspr(SPR_SR) & ~(SPR_SR_IEE|SPR_SR_TEE)) | flags)); | |
| } | |
| EXPORT_SYMBOL(arch_local_irq_restore); | |
| /* OR1K PIC implementation */ | |
| /* We're a couple of cycles faster than the generic implementations with | |
| * these 'fast' versions. | |
| */ | |
| static void or1k_pic_mask(struct irq_data *data) | |
| { | |
| mtspr(SPR_PICMR, mfspr(SPR_PICMR) & ~(1UL << data->irq)); | |
| } | |
| static void or1k_pic_unmask(struct irq_data *data) | |
| { | |
| mtspr(SPR_PICMR, mfspr(SPR_PICMR) | (1UL << data->irq)); | |
| } | |
| static void or1k_pic_ack(struct irq_data *data) | |
| { | |
| /* EDGE-triggered interrupts need to be ack'ed in order to clear | |
| * the latch. | |
| * LEVER-triggered interrupts do not need to be ack'ed; however, | |
| * ack'ing the interrupt has no ill-effect and is quicker than | |
| * trying to figure out what type it is... | |
| */ | |
| /* The OpenRISC 1000 spec says to write a 1 to the bit to ack the | |
| * interrupt, but the OR1200 does this backwards and requires a 0 | |
| * to be written... | |
| */ | |
| #ifdef CONFIG_OR1K_1200 | |
| /* There are two oddities with the OR1200 PIC implementation: | |
| * i) LEVEL-triggered interrupts are latched and need to be cleared | |
| * ii) the interrupt latch is cleared by writing a 0 to the bit, | |
| * as opposed to a 1 as mandated by the spec | |
| */ | |
| mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->irq)); | |
| #else | |
| WARN(1, "Interrupt handling possibily broken\n"); | |
| mtspr(SPR_PICSR, (1UL << irq)); | |
| #endif | |
| } | |
| static void or1k_pic_mask_ack(struct irq_data *data) | |
| { | |
| /* Comments for pic_ack apply here, too */ | |
| #ifdef CONFIG_OR1K_1200 | |
| mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->irq)); | |
| #else | |
| WARN(1, "Interrupt handling possibily broken\n"); | |
| mtspr(SPR_PICSR, (1UL << irq)); | |
| #endif | |
| } | |
| static int or1k_pic_set_type(struct irq_data *data, unsigned int flow_type) | |
| { | |
| /* There's nothing to do in the PIC configuration when changing | |
| * flow type. Level and edge-triggered interrupts are both | |
| * supported, but it's PIC-implementation specific which type | |
| * is handled. */ | |
| return irq_setup_alt_chip(data, flow_type); | |
| } | |
| static inline int pic_get_irq(int first) | |
| { | |
| int irq; | |
| irq = ffs(mfspr(SPR_PICSR) >> first); | |
| return irq ? irq + first - 1 : NO_IRQ; | |
| } | |
| static void __init or1k_irq_init(void) | |
| { | |
| struct irq_chip_generic *gc; | |
| struct irq_chip_type *ct; | |
| /* Disable all interrupts until explicitly requested */ | |
| mtspr(SPR_PICMR, (0UL)); | |
| gc = irq_alloc_generic_chip("or1k-PIC", 1, 0, 0, handle_level_irq); | |
| ct = gc->chip_types; | |
| ct->chip.irq_unmask = or1k_pic_unmask; | |
| ct->chip.irq_mask = or1k_pic_mask; | |
| ct->chip.irq_ack = or1k_pic_ack; | |
| ct->chip.irq_mask_ack = or1k_pic_mask_ack; | |
| ct->chip.irq_set_type = or1k_pic_set_type; | |
| /* The OR1K PIC can handle both level and edge trigged | |
| * interrupts in roughly the same manner | |
| */ | |
| #if 0 | |
| /* FIXME: chip.type??? */ | |
| ct->chip.type = IRQ_TYPE_EDGE_BOTH | IRQ_TYPE_LEVEL_MASK; | |
| #endif | |
| irq_setup_generic_chip(gc, IRQ_MSK(NR_IRQS), 0, | |
| IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); | |
| } | |
| void __init init_IRQ(void) | |
| { | |
| or1k_irq_init(); | |
| } | |
| void __irq_entry do_IRQ(struct pt_regs *regs) | |
| { | |
| int irq = -1; | |
| struct pt_regs *old_regs = set_irq_regs(regs); | |
| irq_enter(); | |
| while ((irq = pic_get_irq(irq + 1)) != NO_IRQ) | |
| generic_handle_irq(irq); | |
| irq_exit(); | |
| set_irq_regs(old_regs); | |
| } | |
| unsigned int irq_create_of_mapping(struct device_node *controller, | |
| const u32 *intspec, unsigned int intsize) | |
| { | |
| return intspec[0]; | |
| } | |
| EXPORT_SYMBOL_GPL(irq_create_of_mapping); |