| /* | |
| * linux/fs/ext4/inode.c | |
| * | |
| * Copyright (C) 1992, 1993, 1994, 1995 | |
| * Remy Card (card@masi.ibp.fr) | |
| * Laboratoire MASI - Institut Blaise Pascal | |
| * Universite Pierre et Marie Curie (Paris VI) | |
| * | |
| * from | |
| * | |
| * linux/fs/minix/inode.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * Goal-directed block allocation by Stephen Tweedie | |
| * (sct@redhat.com), 1993, 1998 | |
| * Big-endian to little-endian byte-swapping/bitmaps by | |
| * David S. Miller (davem@caip.rutgers.edu), 1995 | |
| * 64-bit file support on 64-bit platforms by Jakub Jelinek | |
| * (jj@sunsite.ms.mff.cuni.cz) | |
| * | |
| * Assorted race fixes, rewrite of ext4_get_block() by Al Viro, 2000 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/fs.h> | |
| #include <linux/time.h> | |
| #include <linux/jbd2.h> | |
| #include <linux/highuid.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/quotaops.h> | |
| #include <linux/string.h> | |
| #include <linux/buffer_head.h> | |
| #include <linux/writeback.h> | |
| #include <linux/pagevec.h> | |
| #include <linux/mpage.h> | |
| #include <linux/namei.h> | |
| #include <linux/uio.h> | |
| #include <linux/bio.h> | |
| #include <linux/workqueue.h> | |
| #include "ext4_jbd2.h" | |
| #include "xattr.h" | |
| #include "acl.h" | |
| #include "ext4_extents.h" | |
| #include <trace/events/ext4.h> | |
| #define MPAGE_DA_EXTENT_TAIL 0x01 | |
| static inline int ext4_begin_ordered_truncate(struct inode *inode, | |
| loff_t new_size) | |
| { | |
| return jbd2_journal_begin_ordered_truncate( | |
| EXT4_SB(inode->i_sb)->s_journal, | |
| &EXT4_I(inode)->jinode, | |
| new_size); | |
| } | |
| static void ext4_invalidatepage(struct page *page, unsigned long offset); | |
| /* | |
| * Test whether an inode is a fast symlink. | |
| */ | |
| static int ext4_inode_is_fast_symlink(struct inode *inode) | |
| { | |
| int ea_blocks = EXT4_I(inode)->i_file_acl ? | |
| (inode->i_sb->s_blocksize >> 9) : 0; | |
| return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); | |
| } | |
| /* | |
| * The ext4 forget function must perform a revoke if we are freeing data | |
| * which has been journaled. Metadata (eg. indirect blocks) must be | |
| * revoked in all cases. | |
| * | |
| * "bh" may be NULL: a metadata block may have been freed from memory | |
| * but there may still be a record of it in the journal, and that record | |
| * still needs to be revoked. | |
| * | |
| * If the handle isn't valid we're not journaling, but we still need to | |
| * call into ext4_journal_revoke() to put the buffer head. | |
| */ | |
| int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode, | |
| struct buffer_head *bh, ext4_fsblk_t blocknr) | |
| { | |
| int err; | |
| might_sleep(); | |
| BUFFER_TRACE(bh, "enter"); | |
| jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, " | |
| "data mode %x\n", | |
| bh, is_metadata, inode->i_mode, | |
| test_opt(inode->i_sb, DATA_FLAGS)); | |
| /* Never use the revoke function if we are doing full data | |
| * journaling: there is no need to, and a V1 superblock won't | |
| * support it. Otherwise, only skip the revoke on un-journaled | |
| * data blocks. */ | |
| if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA || | |
| (!is_metadata && !ext4_should_journal_data(inode))) { | |
| if (bh) { | |
| BUFFER_TRACE(bh, "call jbd2_journal_forget"); | |
| return ext4_journal_forget(handle, bh); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * data!=journal && (is_metadata || should_journal_data(inode)) | |
| */ | |
| BUFFER_TRACE(bh, "call ext4_journal_revoke"); | |
| err = ext4_journal_revoke(handle, blocknr, bh); | |
| if (err) | |
| ext4_abort(inode->i_sb, __func__, | |
| "error %d when attempting revoke", err); | |
| BUFFER_TRACE(bh, "exit"); | |
| return err; | |
| } | |
| /* | |
| * Work out how many blocks we need to proceed with the next chunk of a | |
| * truncate transaction. | |
| */ | |
| static unsigned long blocks_for_truncate(struct inode *inode) | |
| { | |
| ext4_lblk_t needed; | |
| needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); | |
| /* Give ourselves just enough room to cope with inodes in which | |
| * i_blocks is corrupt: we've seen disk corruptions in the past | |
| * which resulted in random data in an inode which looked enough | |
| * like a regular file for ext4 to try to delete it. Things | |
| * will go a bit crazy if that happens, but at least we should | |
| * try not to panic the whole kernel. */ | |
| if (needed < 2) | |
| needed = 2; | |
| /* But we need to bound the transaction so we don't overflow the | |
| * journal. */ | |
| if (needed > EXT4_MAX_TRANS_DATA) | |
| needed = EXT4_MAX_TRANS_DATA; | |
| return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; | |
| } | |
| /* | |
| * Truncate transactions can be complex and absolutely huge. So we need to | |
| * be able to restart the transaction at a conventient checkpoint to make | |
| * sure we don't overflow the journal. | |
| * | |
| * start_transaction gets us a new handle for a truncate transaction, | |
| * and extend_transaction tries to extend the existing one a bit. If | |
| * extend fails, we need to propagate the failure up and restart the | |
| * transaction in the top-level truncate loop. --sct | |
| */ | |
| static handle_t *start_transaction(struct inode *inode) | |
| { | |
| handle_t *result; | |
| result = ext4_journal_start(inode, blocks_for_truncate(inode)); | |
| if (!IS_ERR(result)) | |
| return result; | |
| ext4_std_error(inode->i_sb, PTR_ERR(result)); | |
| return result; | |
| } | |
| /* | |
| * Try to extend this transaction for the purposes of truncation. | |
| * | |
| * Returns 0 if we managed to create more room. If we can't create more | |
| * room, and the transaction must be restarted we return 1. | |
| */ | |
| static int try_to_extend_transaction(handle_t *handle, struct inode *inode) | |
| { | |
| if (!ext4_handle_valid(handle)) | |
| return 0; | |
| if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) | |
| return 0; | |
| if (!ext4_journal_extend(handle, blocks_for_truncate(inode))) | |
| return 0; | |
| return 1; | |
| } | |
| /* | |
| * Restart the transaction associated with *handle. This does a commit, | |
| * so before we call here everything must be consistently dirtied against | |
| * this transaction. | |
| */ | |
| int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, | |
| int nblocks) | |
| { | |
| int ret; | |
| /* | |
| * Drop i_data_sem to avoid deadlock with ext4_get_blocks At this | |
| * moment, get_block can be called only for blocks inside i_size since | |
| * page cache has been already dropped and writes are blocked by | |
| * i_mutex. So we can safely drop the i_data_sem here. | |
| */ | |
| BUG_ON(EXT4_JOURNAL(inode) == NULL); | |
| jbd_debug(2, "restarting handle %p\n", handle); | |
| up_write(&EXT4_I(inode)->i_data_sem); | |
| ret = ext4_journal_restart(handle, blocks_for_truncate(inode)); | |
| down_write(&EXT4_I(inode)->i_data_sem); | |
| return ret; | |
| } | |
| /* | |
| * Called at the last iput() if i_nlink is zero. | |
| */ | |
| void ext4_delete_inode(struct inode *inode) | |
| { | |
| handle_t *handle; | |
| int err; | |
| if (ext4_should_order_data(inode)) | |
| ext4_begin_ordered_truncate(inode, 0); | |
| truncate_inode_pages(&inode->i_data, 0); | |
| if (is_bad_inode(inode)) | |
| goto no_delete; | |
| handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3); | |
| if (IS_ERR(handle)) { | |
| ext4_std_error(inode->i_sb, PTR_ERR(handle)); | |
| /* | |
| * If we're going to skip the normal cleanup, we still need to | |
| * make sure that the in-core orphan linked list is properly | |
| * cleaned up. | |
| */ | |
| ext4_orphan_del(NULL, inode); | |
| goto no_delete; | |
| } | |
| if (IS_SYNC(inode)) | |
| ext4_handle_sync(handle); | |
| inode->i_size = 0; | |
| err = ext4_mark_inode_dirty(handle, inode); | |
| if (err) { | |
| ext4_warning(inode->i_sb, __func__, | |
| "couldn't mark inode dirty (err %d)", err); | |
| goto stop_handle; | |
| } | |
| if (inode->i_blocks) | |
| ext4_truncate(inode); | |
| /* | |
| * ext4_ext_truncate() doesn't reserve any slop when it | |
| * restarts journal transactions; therefore there may not be | |
| * enough credits left in the handle to remove the inode from | |
| * the orphan list and set the dtime field. | |
| */ | |
| if (!ext4_handle_has_enough_credits(handle, 3)) { | |
| err = ext4_journal_extend(handle, 3); | |
| if (err > 0) | |
| err = ext4_journal_restart(handle, 3); | |
| if (err != 0) { | |
| ext4_warning(inode->i_sb, __func__, | |
| "couldn't extend journal (err %d)", err); | |
| stop_handle: | |
| ext4_journal_stop(handle); | |
| goto no_delete; | |
| } | |
| } | |
| /* | |
| * Kill off the orphan record which ext4_truncate created. | |
| * AKPM: I think this can be inside the above `if'. | |
| * Note that ext4_orphan_del() has to be able to cope with the | |
| * deletion of a non-existent orphan - this is because we don't | |
| * know if ext4_truncate() actually created an orphan record. | |
| * (Well, we could do this if we need to, but heck - it works) | |
| */ | |
| ext4_orphan_del(handle, inode); | |
| EXT4_I(inode)->i_dtime = get_seconds(); | |
| /* | |
| * One subtle ordering requirement: if anything has gone wrong | |
| * (transaction abort, IO errors, whatever), then we can still | |
| * do these next steps (the fs will already have been marked as | |
| * having errors), but we can't free the inode if the mark_dirty | |
| * fails. | |
| */ | |
| if (ext4_mark_inode_dirty(handle, inode)) | |
| /* If that failed, just do the required in-core inode clear. */ | |
| clear_inode(inode); | |
| else | |
| ext4_free_inode(handle, inode); | |
| ext4_journal_stop(handle); | |
| return; | |
| no_delete: | |
| clear_inode(inode); /* We must guarantee clearing of inode... */ | |
| } | |
| typedef struct { | |
| __le32 *p; | |
| __le32 key; | |
| struct buffer_head *bh; | |
| } Indirect; | |
| static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) | |
| { | |
| p->key = *(p->p = v); | |
| p->bh = bh; | |
| } | |
| /** | |
| * ext4_block_to_path - parse the block number into array of offsets | |
| * @inode: inode in question (we are only interested in its superblock) | |
| * @i_block: block number to be parsed | |
| * @offsets: array to store the offsets in | |
| * @boundary: set this non-zero if the referred-to block is likely to be | |
| * followed (on disk) by an indirect block. | |
| * | |
| * To store the locations of file's data ext4 uses a data structure common | |
| * for UNIX filesystems - tree of pointers anchored in the inode, with | |
| * data blocks at leaves and indirect blocks in intermediate nodes. | |
| * This function translates the block number into path in that tree - | |
| * return value is the path length and @offsets[n] is the offset of | |
| * pointer to (n+1)th node in the nth one. If @block is out of range | |
| * (negative or too large) warning is printed and zero returned. | |
| * | |
| * Note: function doesn't find node addresses, so no IO is needed. All | |
| * we need to know is the capacity of indirect blocks (taken from the | |
| * inode->i_sb). | |
| */ | |
| /* | |
| * Portability note: the last comparison (check that we fit into triple | |
| * indirect block) is spelled differently, because otherwise on an | |
| * architecture with 32-bit longs and 8Kb pages we might get into trouble | |
| * if our filesystem had 8Kb blocks. We might use long long, but that would | |
| * kill us on x86. Oh, well, at least the sign propagation does not matter - | |
| * i_block would have to be negative in the very beginning, so we would not | |
| * get there at all. | |
| */ | |
| static int ext4_block_to_path(struct inode *inode, | |
| ext4_lblk_t i_block, | |
| ext4_lblk_t offsets[4], int *boundary) | |
| { | |
| int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); | |
| int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); | |
| const long direct_blocks = EXT4_NDIR_BLOCKS, | |
| indirect_blocks = ptrs, | |
| double_blocks = (1 << (ptrs_bits * 2)); | |
| int n = 0; | |
| int final = 0; | |
| if (i_block < direct_blocks) { | |
| offsets[n++] = i_block; | |
| final = direct_blocks; | |
| } else if ((i_block -= direct_blocks) < indirect_blocks) { | |
| offsets[n++] = EXT4_IND_BLOCK; | |
| offsets[n++] = i_block; | |
| final = ptrs; | |
| } else if ((i_block -= indirect_blocks) < double_blocks) { | |
| offsets[n++] = EXT4_DIND_BLOCK; | |
| offsets[n++] = i_block >> ptrs_bits; | |
| offsets[n++] = i_block & (ptrs - 1); | |
| final = ptrs; | |
| } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { | |
| offsets[n++] = EXT4_TIND_BLOCK; | |
| offsets[n++] = i_block >> (ptrs_bits * 2); | |
| offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); | |
| offsets[n++] = i_block & (ptrs - 1); | |
| final = ptrs; | |
| } else { | |
| ext4_warning(inode->i_sb, "ext4_block_to_path", | |
| "block %lu > max in inode %lu", | |
| i_block + direct_blocks + | |
| indirect_blocks + double_blocks, inode->i_ino); | |
| } | |
| if (boundary) | |
| *boundary = final - 1 - (i_block & (ptrs - 1)); | |
| return n; | |
| } | |
| static int __ext4_check_blockref(const char *function, struct inode *inode, | |
| __le32 *p, unsigned int max) | |
| { | |
| __le32 *bref = p; | |
| unsigned int blk; | |
| while (bref < p+max) { | |
| blk = le32_to_cpu(*bref++); | |
| if (blk && | |
| unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), | |
| blk, 1))) { | |
| ext4_error(inode->i_sb, function, | |
| "invalid block reference %u " | |
| "in inode #%lu", blk, inode->i_ino); | |
| return -EIO; | |
| } | |
| } | |
| return 0; | |
| } | |
| #define ext4_check_indirect_blockref(inode, bh) \ | |
| __ext4_check_blockref(__func__, inode, (__le32 *)(bh)->b_data, \ | |
| EXT4_ADDR_PER_BLOCK((inode)->i_sb)) | |
| #define ext4_check_inode_blockref(inode) \ | |
| __ext4_check_blockref(__func__, inode, EXT4_I(inode)->i_data, \ | |
| EXT4_NDIR_BLOCKS) | |
| /** | |
| * ext4_get_branch - read the chain of indirect blocks leading to data | |
| * @inode: inode in question | |
| * @depth: depth of the chain (1 - direct pointer, etc.) | |
| * @offsets: offsets of pointers in inode/indirect blocks | |
| * @chain: place to store the result | |
| * @err: here we store the error value | |
| * | |
| * Function fills the array of triples <key, p, bh> and returns %NULL | |
| * if everything went OK or the pointer to the last filled triple | |
| * (incomplete one) otherwise. Upon the return chain[i].key contains | |
| * the number of (i+1)-th block in the chain (as it is stored in memory, | |
| * i.e. little-endian 32-bit), chain[i].p contains the address of that | |
| * number (it points into struct inode for i==0 and into the bh->b_data | |
| * for i>0) and chain[i].bh points to the buffer_head of i-th indirect | |
| * block for i>0 and NULL for i==0. In other words, it holds the block | |
| * numbers of the chain, addresses they were taken from (and where we can | |
| * verify that chain did not change) and buffer_heads hosting these | |
| * numbers. | |
| * | |
| * Function stops when it stumbles upon zero pointer (absent block) | |
| * (pointer to last triple returned, *@err == 0) | |
| * or when it gets an IO error reading an indirect block | |
| * (ditto, *@err == -EIO) | |
| * or when it reads all @depth-1 indirect blocks successfully and finds | |
| * the whole chain, all way to the data (returns %NULL, *err == 0). | |
| * | |
| * Need to be called with | |
| * down_read(&EXT4_I(inode)->i_data_sem) | |
| */ | |
| static Indirect *ext4_get_branch(struct inode *inode, int depth, | |
| ext4_lblk_t *offsets, | |
| Indirect chain[4], int *err) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| Indirect *p = chain; | |
| struct buffer_head *bh; | |
| *err = 0; | |
| /* i_data is not going away, no lock needed */ | |
| add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); | |
| if (!p->key) | |
| goto no_block; | |
| while (--depth) { | |
| bh = sb_getblk(sb, le32_to_cpu(p->key)); | |
| if (unlikely(!bh)) | |
| goto failure; | |
| if (!bh_uptodate_or_lock(bh)) { | |
| if (bh_submit_read(bh) < 0) { | |
| put_bh(bh); | |
| goto failure; | |
| } | |
| /* validate block references */ | |
| if (ext4_check_indirect_blockref(inode, bh)) { | |
| put_bh(bh); | |
| goto failure; | |
| } | |
| } | |
| add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); | |
| /* Reader: end */ | |
| if (!p->key) | |
| goto no_block; | |
| } | |
| return NULL; | |
| failure: | |
| *err = -EIO; | |
| no_block: | |
| return p; | |
| } | |
| /** | |
| * ext4_find_near - find a place for allocation with sufficient locality | |
| * @inode: owner | |
| * @ind: descriptor of indirect block. | |
| * | |
| * This function returns the preferred place for block allocation. | |
| * It is used when heuristic for sequential allocation fails. | |
| * Rules are: | |
| * + if there is a block to the left of our position - allocate near it. | |
| * + if pointer will live in indirect block - allocate near that block. | |
| * + if pointer will live in inode - allocate in the same | |
| * cylinder group. | |
| * | |
| * In the latter case we colour the starting block by the callers PID to | |
| * prevent it from clashing with concurrent allocations for a different inode | |
| * in the same block group. The PID is used here so that functionally related | |
| * files will be close-by on-disk. | |
| * | |
| * Caller must make sure that @ind is valid and will stay that way. | |
| */ | |
| static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) | |
| { | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; | |
| __le32 *p; | |
| ext4_fsblk_t bg_start; | |
| ext4_fsblk_t last_block; | |
| ext4_grpblk_t colour; | |
| ext4_group_t block_group; | |
| int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); | |
| /* Try to find previous block */ | |
| for (p = ind->p - 1; p >= start; p--) { | |
| if (*p) | |
| return le32_to_cpu(*p); | |
| } | |
| /* No such thing, so let's try location of indirect block */ | |
| if (ind->bh) | |
| return ind->bh->b_blocknr; | |
| /* | |
| * It is going to be referred to from the inode itself? OK, just put it | |
| * into the same cylinder group then. | |
| */ | |
| block_group = ei->i_block_group; | |
| if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { | |
| block_group &= ~(flex_size-1); | |
| if (S_ISREG(inode->i_mode)) | |
| block_group++; | |
| } | |
| bg_start = ext4_group_first_block_no(inode->i_sb, block_group); | |
| last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; | |
| /* | |
| * If we are doing delayed allocation, we don't need take | |
| * colour into account. | |
| */ | |
| if (test_opt(inode->i_sb, DELALLOC)) | |
| return bg_start; | |
| if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) | |
| colour = (current->pid % 16) * | |
| (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); | |
| else | |
| colour = (current->pid % 16) * ((last_block - bg_start) / 16); | |
| return bg_start + colour; | |
| } | |
| /** | |
| * ext4_find_goal - find a preferred place for allocation. | |
| * @inode: owner | |
| * @block: block we want | |
| * @partial: pointer to the last triple within a chain | |
| * | |
| * Normally this function find the preferred place for block allocation, | |
| * returns it. | |
| * Because this is only used for non-extent files, we limit the block nr | |
| * to 32 bits. | |
| */ | |
| static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, | |
| Indirect *partial) | |
| { | |
| ext4_fsblk_t goal; | |
| /* | |
| * XXX need to get goal block from mballoc's data structures | |
| */ | |
| goal = ext4_find_near(inode, partial); | |
| goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; | |
| return goal; | |
| } | |
| /** | |
| * ext4_blks_to_allocate: Look up the block map and count the number | |
| * of direct blocks need to be allocated for the given branch. | |
| * | |
| * @branch: chain of indirect blocks | |
| * @k: number of blocks need for indirect blocks | |
| * @blks: number of data blocks to be mapped. | |
| * @blocks_to_boundary: the offset in the indirect block | |
| * | |
| * return the total number of blocks to be allocate, including the | |
| * direct and indirect blocks. | |
| */ | |
| static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, | |
| int blocks_to_boundary) | |
| { | |
| unsigned int count = 0; | |
| /* | |
| * Simple case, [t,d]Indirect block(s) has not allocated yet | |
| * then it's clear blocks on that path have not allocated | |
| */ | |
| if (k > 0) { | |
| /* right now we don't handle cross boundary allocation */ | |
| if (blks < blocks_to_boundary + 1) | |
| count += blks; | |
| else | |
| count += blocks_to_boundary + 1; | |
| return count; | |
| } | |
| count++; | |
| while (count < blks && count <= blocks_to_boundary && | |
| le32_to_cpu(*(branch[0].p + count)) == 0) { | |
| count++; | |
| } | |
| return count; | |
| } | |
| /** | |
| * ext4_alloc_blocks: multiple allocate blocks needed for a branch | |
| * @indirect_blks: the number of blocks need to allocate for indirect | |
| * blocks | |
| * | |
| * @new_blocks: on return it will store the new block numbers for | |
| * the indirect blocks(if needed) and the first direct block, | |
| * @blks: on return it will store the total number of allocated | |
| * direct blocks | |
| */ | |
| static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, | |
| ext4_lblk_t iblock, ext4_fsblk_t goal, | |
| int indirect_blks, int blks, | |
| ext4_fsblk_t new_blocks[4], int *err) | |
| { | |
| struct ext4_allocation_request ar; | |
| int target, i; | |
| unsigned long count = 0, blk_allocated = 0; | |
| int index = 0; | |
| ext4_fsblk_t current_block = 0; | |
| int ret = 0; | |
| /* | |
| * Here we try to allocate the requested multiple blocks at once, | |
| * on a best-effort basis. | |
| * To build a branch, we should allocate blocks for | |
| * the indirect blocks(if not allocated yet), and at least | |
| * the first direct block of this branch. That's the | |
| * minimum number of blocks need to allocate(required) | |
| */ | |
| /* first we try to allocate the indirect blocks */ | |
| target = indirect_blks; | |
| while (target > 0) { | |
| count = target; | |
| /* allocating blocks for indirect blocks and direct blocks */ | |
| current_block = ext4_new_meta_blocks(handle, inode, | |
| goal, &count, err); | |
| if (*err) | |
| goto failed_out; | |
| BUG_ON(current_block + count > EXT4_MAX_BLOCK_FILE_PHYS); | |
| target -= count; | |
| /* allocate blocks for indirect blocks */ | |
| while (index < indirect_blks && count) { | |
| new_blocks[index++] = current_block++; | |
| count--; | |
| } | |
| if (count > 0) { | |
| /* | |
| * save the new block number | |
| * for the first direct block | |
| */ | |
| new_blocks[index] = current_block; | |
| printk(KERN_INFO "%s returned more blocks than " | |
| "requested\n", __func__); | |
| WARN_ON(1); | |
| break; | |
| } | |
| } | |
| target = blks - count ; | |
| blk_allocated = count; | |
| if (!target) | |
| goto allocated; | |
| /* Now allocate data blocks */ | |
| memset(&ar, 0, sizeof(ar)); | |
| ar.inode = inode; | |
| ar.goal = goal; | |
| ar.len = target; | |
| ar.logical = iblock; | |
| if (S_ISREG(inode->i_mode)) | |
| /* enable in-core preallocation only for regular files */ | |
| ar.flags = EXT4_MB_HINT_DATA; | |
| current_block = ext4_mb_new_blocks(handle, &ar, err); | |
| BUG_ON(current_block + ar.len > EXT4_MAX_BLOCK_FILE_PHYS); | |
| if (*err && (target == blks)) { | |
| /* | |
| * if the allocation failed and we didn't allocate | |
| * any blocks before | |
| */ | |
| goto failed_out; | |
| } | |
| if (!*err) { | |
| if (target == blks) { | |
| /* | |
| * save the new block number | |
| * for the first direct block | |
| */ | |
| new_blocks[index] = current_block; | |
| } | |
| blk_allocated += ar.len; | |
| } | |
| allocated: | |
| /* total number of blocks allocated for direct blocks */ | |
| ret = blk_allocated; | |
| *err = 0; | |
| return ret; | |
| failed_out: | |
| for (i = 0; i < index; i++) | |
| ext4_free_blocks(handle, inode, new_blocks[i], 1, 0); | |
| return ret; | |
| } | |
| /** | |
| * ext4_alloc_branch - allocate and set up a chain of blocks. | |
| * @inode: owner | |
| * @indirect_blks: number of allocated indirect blocks | |
| * @blks: number of allocated direct blocks | |
| * @offsets: offsets (in the blocks) to store the pointers to next. | |
| * @branch: place to store the chain in. | |
| * | |
| * This function allocates blocks, zeroes out all but the last one, | |
| * links them into chain and (if we are synchronous) writes them to disk. | |
| * In other words, it prepares a branch that can be spliced onto the | |
| * inode. It stores the information about that chain in the branch[], in | |
| * the same format as ext4_get_branch() would do. We are calling it after | |
| * we had read the existing part of chain and partial points to the last | |
| * triple of that (one with zero ->key). Upon the exit we have the same | |
| * picture as after the successful ext4_get_block(), except that in one | |
| * place chain is disconnected - *branch->p is still zero (we did not | |
| * set the last link), but branch->key contains the number that should | |
| * be placed into *branch->p to fill that gap. | |
| * | |
| * If allocation fails we free all blocks we've allocated (and forget | |
| * their buffer_heads) and return the error value the from failed | |
| * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain | |
| * as described above and return 0. | |
| */ | |
| static int ext4_alloc_branch(handle_t *handle, struct inode *inode, | |
| ext4_lblk_t iblock, int indirect_blks, | |
| int *blks, ext4_fsblk_t goal, | |
| ext4_lblk_t *offsets, Indirect *branch) | |
| { | |
| int blocksize = inode->i_sb->s_blocksize; | |
| int i, n = 0; | |
| int err = 0; | |
| struct buffer_head *bh; | |
| int num; | |
| ext4_fsblk_t new_blocks[4]; | |
| ext4_fsblk_t current_block; | |
| num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, | |
| *blks, new_blocks, &err); | |
| if (err) | |
| return err; | |
| branch[0].key = cpu_to_le32(new_blocks[0]); | |
| /* | |
| * metadata blocks and data blocks are allocated. | |
| */ | |
| for (n = 1; n <= indirect_blks; n++) { | |
| /* | |
| * Get buffer_head for parent block, zero it out | |
| * and set the pointer to new one, then send | |
| * parent to disk. | |
| */ | |
| bh = sb_getblk(inode->i_sb, new_blocks[n-1]); | |
| branch[n].bh = bh; | |
| lock_buffer(bh); | |
| BUFFER_TRACE(bh, "call get_create_access"); | |
| err = ext4_journal_get_create_access(handle, bh); | |
| if (err) { | |
| /* Don't brelse(bh) here; it's done in | |
| * ext4_journal_forget() below */ | |
| unlock_buffer(bh); | |
| goto failed; | |
| } | |
| memset(bh->b_data, 0, blocksize); | |
| branch[n].p = (__le32 *) bh->b_data + offsets[n]; | |
| branch[n].key = cpu_to_le32(new_blocks[n]); | |
| *branch[n].p = branch[n].key; | |
| if (n == indirect_blks) { | |
| current_block = new_blocks[n]; | |
| /* | |
| * End of chain, update the last new metablock of | |
| * the chain to point to the new allocated | |
| * data blocks numbers | |
| */ | |
| for (i = 1; i < num; i++) | |
| *(branch[n].p + i) = cpu_to_le32(++current_block); | |
| } | |
| BUFFER_TRACE(bh, "marking uptodate"); | |
| set_buffer_uptodate(bh); | |
| unlock_buffer(bh); | |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | |
| err = ext4_handle_dirty_metadata(handle, inode, bh); | |
| if (err) | |
| goto failed; | |
| } | |
| *blks = num; | |
| return err; | |
| failed: | |
| /* Allocation failed, free what we already allocated */ | |
| for (i = 1; i <= n ; i++) { | |
| BUFFER_TRACE(branch[i].bh, "call jbd2_journal_forget"); | |
| ext4_journal_forget(handle, branch[i].bh); | |
| } | |
| for (i = 0; i < indirect_blks; i++) | |
| ext4_free_blocks(handle, inode, new_blocks[i], 1, 0); | |
| ext4_free_blocks(handle, inode, new_blocks[i], num, 0); | |
| return err; | |
| } | |
| /** | |
| * ext4_splice_branch - splice the allocated branch onto inode. | |
| * @inode: owner | |
| * @block: (logical) number of block we are adding | |
| * @chain: chain of indirect blocks (with a missing link - see | |
| * ext4_alloc_branch) | |
| * @where: location of missing link | |
| * @num: number of indirect blocks we are adding | |
| * @blks: number of direct blocks we are adding | |
| * | |
| * This function fills the missing link and does all housekeeping needed in | |
| * inode (->i_blocks, etc.). In case of success we end up with the full | |
| * chain to new block and return 0. | |
| */ | |
| static int ext4_splice_branch(handle_t *handle, struct inode *inode, | |
| ext4_lblk_t block, Indirect *where, int num, | |
| int blks) | |
| { | |
| int i; | |
| int err = 0; | |
| ext4_fsblk_t current_block; | |
| /* | |
| * If we're splicing into a [td]indirect block (as opposed to the | |
| * inode) then we need to get write access to the [td]indirect block | |
| * before the splice. | |
| */ | |
| if (where->bh) { | |
| BUFFER_TRACE(where->bh, "get_write_access"); | |
| err = ext4_journal_get_write_access(handle, where->bh); | |
| if (err) | |
| goto err_out; | |
| } | |
| /* That's it */ | |
| *where->p = where->key; | |
| /* | |
| * Update the host buffer_head or inode to point to more just allocated | |
| * direct blocks blocks | |
| */ | |
| if (num == 0 && blks > 1) { | |
| current_block = le32_to_cpu(where->key) + 1; | |
| for (i = 1; i < blks; i++) | |
| *(where->p + i) = cpu_to_le32(current_block++); | |
| } | |
| /* We are done with atomic stuff, now do the rest of housekeeping */ | |
| /* had we spliced it onto indirect block? */ | |
| if (where->bh) { | |
| /* | |
| * If we spliced it onto an indirect block, we haven't | |
| * altered the inode. Note however that if it is being spliced | |
| * onto an indirect block at the very end of the file (the | |
| * file is growing) then we *will* alter the inode to reflect | |
| * the new i_size. But that is not done here - it is done in | |
| * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. | |
| */ | |
| jbd_debug(5, "splicing indirect only\n"); | |
| BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); | |
| err = ext4_handle_dirty_metadata(handle, inode, where->bh); | |
| if (err) | |
| goto err_out; | |
| } else { | |
| /* | |
| * OK, we spliced it into the inode itself on a direct block. | |
| */ | |
| ext4_mark_inode_dirty(handle, inode); | |
| jbd_debug(5, "splicing direct\n"); | |
| } | |
| return err; | |
| err_out: | |
| for (i = 1; i <= num; i++) { | |
| BUFFER_TRACE(where[i].bh, "call jbd2_journal_forget"); | |
| ext4_journal_forget(handle, where[i].bh); | |
| ext4_free_blocks(handle, inode, | |
| le32_to_cpu(where[i-1].key), 1, 0); | |
| } | |
| ext4_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks, 0); | |
| return err; | |
| } | |
| /* | |
| * The ext4_ind_get_blocks() function handles non-extents inodes | |
| * (i.e., using the traditional indirect/double-indirect i_blocks | |
| * scheme) for ext4_get_blocks(). | |
| * | |
| * Allocation strategy is simple: if we have to allocate something, we will | |
| * have to go the whole way to leaf. So let's do it before attaching anything | |
| * to tree, set linkage between the newborn blocks, write them if sync is | |
| * required, recheck the path, free and repeat if check fails, otherwise | |
| * set the last missing link (that will protect us from any truncate-generated | |
| * removals - all blocks on the path are immune now) and possibly force the | |
| * write on the parent block. | |
| * That has a nice additional property: no special recovery from the failed | |
| * allocations is needed - we simply release blocks and do not touch anything | |
| * reachable from inode. | |
| * | |
| * `handle' can be NULL if create == 0. | |
| * | |
| * return > 0, # of blocks mapped or allocated. | |
| * return = 0, if plain lookup failed. | |
| * return < 0, error case. | |
| * | |
| * The ext4_ind_get_blocks() function should be called with | |
| * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem | |
| * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or | |
| * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system | |
| * blocks. | |
| */ | |
| static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode, | |
| ext4_lblk_t iblock, unsigned int maxblocks, | |
| struct buffer_head *bh_result, | |
| int flags) | |
| { | |
| int err = -EIO; | |
| ext4_lblk_t offsets[4]; | |
| Indirect chain[4]; | |
| Indirect *partial; | |
| ext4_fsblk_t goal; | |
| int indirect_blks; | |
| int blocks_to_boundary = 0; | |
| int depth; | |
| int count = 0; | |
| ext4_fsblk_t first_block = 0; | |
| J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)); | |
| J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); | |
| depth = ext4_block_to_path(inode, iblock, offsets, | |
| &blocks_to_boundary); | |
| if (depth == 0) | |
| goto out; | |
| partial = ext4_get_branch(inode, depth, offsets, chain, &err); | |
| /* Simplest case - block found, no allocation needed */ | |
| if (!partial) { | |
| first_block = le32_to_cpu(chain[depth - 1].key); | |
| clear_buffer_new(bh_result); | |
| count++; | |
| /*map more blocks*/ | |
| while (count < maxblocks && count <= blocks_to_boundary) { | |
| ext4_fsblk_t blk; | |
| blk = le32_to_cpu(*(chain[depth-1].p + count)); | |
| if (blk == first_block + count) | |
| count++; | |
| else | |
| break; | |
| } | |
| goto got_it; | |
| } | |
| /* Next simple case - plain lookup or failed read of indirect block */ | |
| if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) | |
| goto cleanup; | |
| /* | |
| * Okay, we need to do block allocation. | |
| */ | |
| goal = ext4_find_goal(inode, iblock, partial); | |
| /* the number of blocks need to allocate for [d,t]indirect blocks */ | |
| indirect_blks = (chain + depth) - partial - 1; | |
| /* | |
| * Next look up the indirect map to count the totoal number of | |
| * direct blocks to allocate for this branch. | |
| */ | |
| count = ext4_blks_to_allocate(partial, indirect_blks, | |
| maxblocks, blocks_to_boundary); | |
| /* | |
| * Block out ext4_truncate while we alter the tree | |
| */ | |
| err = ext4_alloc_branch(handle, inode, iblock, indirect_blks, | |
| &count, goal, | |
| offsets + (partial - chain), partial); | |
| /* | |
| * The ext4_splice_branch call will free and forget any buffers | |
| * on the new chain if there is a failure, but that risks using | |
| * up transaction credits, especially for bitmaps where the | |
| * credits cannot be returned. Can we handle this somehow? We | |
| * may need to return -EAGAIN upwards in the worst case. --sct | |
| */ | |
| if (!err) | |
| err = ext4_splice_branch(handle, inode, iblock, | |
| partial, indirect_blks, count); | |
| else | |
| goto cleanup; | |
| set_buffer_new(bh_result); | |
| got_it: | |
| map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key)); | |
| if (count > blocks_to_boundary) | |
| set_buffer_boundary(bh_result); | |
| err = count; | |
| /* Clean up and exit */ | |
| partial = chain + depth - 1; /* the whole chain */ | |
| cleanup: | |
| while (partial > chain) { | |
| BUFFER_TRACE(partial->bh, "call brelse"); | |
| brelse(partial->bh); | |
| partial--; | |
| } | |
| BUFFER_TRACE(bh_result, "returned"); | |
| out: | |
| return err; | |
| } | |
| qsize_t ext4_get_reserved_space(struct inode *inode) | |
| { | |
| unsigned long long total; | |
| spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
| total = EXT4_I(inode)->i_reserved_data_blocks + | |
| EXT4_I(inode)->i_reserved_meta_blocks; | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| return total; | |
| } | |
| /* | |
| * Calculate the number of metadata blocks need to reserve | |
| * to allocate @blocks for non extent file based file | |
| */ | |
| static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) | |
| { | |
| int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); | |
| int ind_blks, dind_blks, tind_blks; | |
| /* number of new indirect blocks needed */ | |
| ind_blks = (blocks + icap - 1) / icap; | |
| dind_blks = (ind_blks + icap - 1) / icap; | |
| tind_blks = 1; | |
| return ind_blks + dind_blks + tind_blks; | |
| } | |
| /* | |
| * Calculate the number of metadata blocks need to reserve | |
| * to allocate given number of blocks | |
| */ | |
| static int ext4_calc_metadata_amount(struct inode *inode, int blocks) | |
| { | |
| if (!blocks) | |
| return 0; | |
| if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) | |
| return ext4_ext_calc_metadata_amount(inode, blocks); | |
| return ext4_indirect_calc_metadata_amount(inode, blocks); | |
| } | |
| static void ext4_da_update_reserve_space(struct inode *inode, int used) | |
| { | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| int total, mdb, mdb_free; | |
| spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
| /* recalculate the number of metablocks still need to be reserved */ | |
| total = EXT4_I(inode)->i_reserved_data_blocks - used; | |
| mdb = ext4_calc_metadata_amount(inode, total); | |
| /* figure out how many metablocks to release */ | |
| BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | |
| mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; | |
| if (mdb_free) { | |
| /* Account for allocated meta_blocks */ | |
| mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; | |
| /* update fs dirty blocks counter */ | |
| percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); | |
| EXT4_I(inode)->i_allocated_meta_blocks = 0; | |
| EXT4_I(inode)->i_reserved_meta_blocks = mdb; | |
| } | |
| /* update per-inode reservations */ | |
| BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks); | |
| EXT4_I(inode)->i_reserved_data_blocks -= used; | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| /* | |
| * free those over-booking quota for metadata blocks | |
| */ | |
| if (mdb_free) | |
| vfs_dq_release_reservation_block(inode, mdb_free); | |
| /* | |
| * If we have done all the pending block allocations and if | |
| * there aren't any writers on the inode, we can discard the | |
| * inode's preallocations. | |
| */ | |
| if (!total && (atomic_read(&inode->i_writecount) == 0)) | |
| ext4_discard_preallocations(inode); | |
| } | |
| static int check_block_validity(struct inode *inode, const char *msg, | |
| sector_t logical, sector_t phys, int len) | |
| { | |
| if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), phys, len)) { | |
| ext4_error(inode->i_sb, msg, | |
| "inode #%lu logical block %llu mapped to %llu " | |
| "(size %d)", inode->i_ino, | |
| (unsigned long long) logical, | |
| (unsigned long long) phys, len); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Return the number of dirty pages in the given inode starting at | |
| * page frame idx. | |
| */ | |
| static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx, | |
| unsigned int max_pages) | |
| { | |
| struct address_space *mapping = inode->i_mapping; | |
| pgoff_t index; | |
| struct pagevec pvec; | |
| pgoff_t num = 0; | |
| int i, nr_pages, done = 0; | |
| if (max_pages == 0) | |
| return 0; | |
| pagevec_init(&pvec, 0); | |
| while (!done) { | |
| index = idx; | |
| nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, | |
| PAGECACHE_TAG_DIRTY, | |
| (pgoff_t)PAGEVEC_SIZE); | |
| if (nr_pages == 0) | |
| break; | |
| for (i = 0; i < nr_pages; i++) { | |
| struct page *page = pvec.pages[i]; | |
| struct buffer_head *bh, *head; | |
| lock_page(page); | |
| if (unlikely(page->mapping != mapping) || | |
| !PageDirty(page) || | |
| PageWriteback(page) || | |
| page->index != idx) { | |
| done = 1; | |
| unlock_page(page); | |
| break; | |
| } | |
| head = page_buffers(page); | |
| bh = head; | |
| do { | |
| if (!buffer_delay(bh) && | |
| !buffer_unwritten(bh)) { | |
| done = 1; | |
| break; | |
| } | |
| } while ((bh = bh->b_this_page) != head); | |
| unlock_page(page); | |
| if (done) | |
| break; | |
| idx++; | |
| num++; | |
| if (num >= max_pages) | |
| break; | |
| } | |
| pagevec_release(&pvec); | |
| } | |
| return num; | |
| } | |
| /* | |
| * The ext4_get_blocks() function tries to look up the requested blocks, | |
| * and returns if the blocks are already mapped. | |
| * | |
| * Otherwise it takes the write lock of the i_data_sem and allocate blocks | |
| * and store the allocated blocks in the result buffer head and mark it | |
| * mapped. | |
| * | |
| * If file type is extents based, it will call ext4_ext_get_blocks(), | |
| * Otherwise, call with ext4_ind_get_blocks() to handle indirect mapping | |
| * based files | |
| * | |
| * On success, it returns the number of blocks being mapped or allocate. | |
| * if create==0 and the blocks are pre-allocated and uninitialized block, | |
| * the result buffer head is unmapped. If the create ==1, it will make sure | |
| * the buffer head is mapped. | |
| * | |
| * It returns 0 if plain look up failed (blocks have not been allocated), in | |
| * that casem, buffer head is unmapped | |
| * | |
| * It returns the error in case of allocation failure. | |
| */ | |
| int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, | |
| unsigned int max_blocks, struct buffer_head *bh, | |
| int flags) | |
| { | |
| int retval; | |
| clear_buffer_mapped(bh); | |
| clear_buffer_unwritten(bh); | |
| ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u," | |
| "logical block %lu\n", inode->i_ino, flags, max_blocks, | |
| (unsigned long)block); | |
| /* | |
| * Try to see if we can get the block without requesting a new | |
| * file system block. | |
| */ | |
| down_read((&EXT4_I(inode)->i_data_sem)); | |
| if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | |
| retval = ext4_ext_get_blocks(handle, inode, block, max_blocks, | |
| bh, 0); | |
| } else { | |
| retval = ext4_ind_get_blocks(handle, inode, block, max_blocks, | |
| bh, 0); | |
| } | |
| up_read((&EXT4_I(inode)->i_data_sem)); | |
| if (retval > 0 && buffer_mapped(bh)) { | |
| int ret = check_block_validity(inode, "file system corruption", | |
| block, bh->b_blocknr, retval); | |
| if (ret != 0) | |
| return ret; | |
| } | |
| /* If it is only a block(s) look up */ | |
| if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) | |
| return retval; | |
| /* | |
| * Returns if the blocks have already allocated | |
| * | |
| * Note that if blocks have been preallocated | |
| * ext4_ext_get_block() returns th create = 0 | |
| * with buffer head unmapped. | |
| */ | |
| if (retval > 0 && buffer_mapped(bh)) | |
| return retval; | |
| /* | |
| * When we call get_blocks without the create flag, the | |
| * BH_Unwritten flag could have gotten set if the blocks | |
| * requested were part of a uninitialized extent. We need to | |
| * clear this flag now that we are committed to convert all or | |
| * part of the uninitialized extent to be an initialized | |
| * extent. This is because we need to avoid the combination | |
| * of BH_Unwritten and BH_Mapped flags being simultaneously | |
| * set on the buffer_head. | |
| */ | |
| clear_buffer_unwritten(bh); | |
| /* | |
| * New blocks allocate and/or writing to uninitialized extent | |
| * will possibly result in updating i_data, so we take | |
| * the write lock of i_data_sem, and call get_blocks() | |
| * with create == 1 flag. | |
| */ | |
| down_write((&EXT4_I(inode)->i_data_sem)); | |
| /* | |
| * if the caller is from delayed allocation writeout path | |
| * we have already reserved fs blocks for allocation | |
| * let the underlying get_block() function know to | |
| * avoid double accounting | |
| */ | |
| if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | |
| EXT4_I(inode)->i_delalloc_reserved_flag = 1; | |
| /* | |
| * We need to check for EXT4 here because migrate | |
| * could have changed the inode type in between | |
| */ | |
| if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | |
| retval = ext4_ext_get_blocks(handle, inode, block, max_blocks, | |
| bh, flags); | |
| } else { | |
| retval = ext4_ind_get_blocks(handle, inode, block, | |
| max_blocks, bh, flags); | |
| if (retval > 0 && buffer_new(bh)) { | |
| /* | |
| * We allocated new blocks which will result in | |
| * i_data's format changing. Force the migrate | |
| * to fail by clearing migrate flags | |
| */ | |
| EXT4_I(inode)->i_state &= ~EXT4_STATE_EXT_MIGRATE; | |
| } | |
| } | |
| if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | |
| EXT4_I(inode)->i_delalloc_reserved_flag = 0; | |
| /* | |
| * Update reserved blocks/metadata blocks after successful | |
| * block allocation which had been deferred till now. | |
| */ | |
| if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE)) | |
| ext4_da_update_reserve_space(inode, retval); | |
| up_write((&EXT4_I(inode)->i_data_sem)); | |
| if (retval > 0 && buffer_mapped(bh)) { | |
| int ret = check_block_validity(inode, "file system " | |
| "corruption after allocation", | |
| block, bh->b_blocknr, retval); | |
| if (ret != 0) | |
| return ret; | |
| } | |
| return retval; | |
| } | |
| /* Maximum number of blocks we map for direct IO at once. */ | |
| #define DIO_MAX_BLOCKS 4096 | |
| int ext4_get_block(struct inode *inode, sector_t iblock, | |
| struct buffer_head *bh_result, int create) | |
| { | |
| handle_t *handle = ext4_journal_current_handle(); | |
| int ret = 0, started = 0; | |
| unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | |
| int dio_credits; | |
| if (create && !handle) { | |
| /* Direct IO write... */ | |
| if (max_blocks > DIO_MAX_BLOCKS) | |
| max_blocks = DIO_MAX_BLOCKS; | |
| dio_credits = ext4_chunk_trans_blocks(inode, max_blocks); | |
| handle = ext4_journal_start(inode, dio_credits); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| started = 1; | |
| } | |
| ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result, | |
| create ? EXT4_GET_BLOCKS_CREATE : 0); | |
| if (ret > 0) { | |
| bh_result->b_size = (ret << inode->i_blkbits); | |
| ret = 0; | |
| } | |
| if (started) | |
| ext4_journal_stop(handle); | |
| out: | |
| return ret; | |
| } | |
| /* | |
| * `handle' can be NULL if create is zero | |
| */ | |
| struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode, | |
| ext4_lblk_t block, int create, int *errp) | |
| { | |
| struct buffer_head dummy; | |
| int fatal = 0, err; | |
| int flags = 0; | |
| J_ASSERT(handle != NULL || create == 0); | |
| dummy.b_state = 0; | |
| dummy.b_blocknr = -1000; | |
| buffer_trace_init(&dummy.b_history); | |
| if (create) | |
| flags |= EXT4_GET_BLOCKS_CREATE; | |
| err = ext4_get_blocks(handle, inode, block, 1, &dummy, flags); | |
| /* | |
| * ext4_get_blocks() returns number of blocks mapped. 0 in | |
| * case of a HOLE. | |
| */ | |
| if (err > 0) { | |
| if (err > 1) | |
| WARN_ON(1); | |
| err = 0; | |
| } | |
| *errp = err; | |
| if (!err && buffer_mapped(&dummy)) { | |
| struct buffer_head *bh; | |
| bh = sb_getblk(inode->i_sb, dummy.b_blocknr); | |
| if (!bh) { | |
| *errp = -EIO; | |
| goto err; | |
| } | |
| if (buffer_new(&dummy)) { | |
| J_ASSERT(create != 0); | |
| J_ASSERT(handle != NULL); | |
| /* | |
| * Now that we do not always journal data, we should | |
| * keep in mind whether this should always journal the | |
| * new buffer as metadata. For now, regular file | |
| * writes use ext4_get_block instead, so it's not a | |
| * problem. | |
| */ | |
| lock_buffer(bh); | |
| BUFFER_TRACE(bh, "call get_create_access"); | |
| fatal = ext4_journal_get_create_access(handle, bh); | |
| if (!fatal && !buffer_uptodate(bh)) { | |
| memset(bh->b_data, 0, inode->i_sb->s_blocksize); | |
| set_buffer_uptodate(bh); | |
| } | |
| unlock_buffer(bh); | |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | |
| err = ext4_handle_dirty_metadata(handle, inode, bh); | |
| if (!fatal) | |
| fatal = err; | |
| } else { | |
| BUFFER_TRACE(bh, "not a new buffer"); | |
| } | |
| if (fatal) { | |
| *errp = fatal; | |
| brelse(bh); | |
| bh = NULL; | |
| } | |
| return bh; | |
| } | |
| err: | |
| return NULL; | |
| } | |
| struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, | |
| ext4_lblk_t block, int create, int *err) | |
| { | |
| struct buffer_head *bh; | |
| bh = ext4_getblk(handle, inode, block, create, err); | |
| if (!bh) | |
| return bh; | |
| if (buffer_uptodate(bh)) | |
| return bh; | |
| ll_rw_block(READ_META, 1, &bh); | |
| wait_on_buffer(bh); | |
| if (buffer_uptodate(bh)) | |
| return bh; | |
| put_bh(bh); | |
| *err = -EIO; | |
| return NULL; | |
| } | |
| static int walk_page_buffers(handle_t *handle, | |
| struct buffer_head *head, | |
| unsigned from, | |
| unsigned to, | |
| int *partial, | |
| int (*fn)(handle_t *handle, | |
| struct buffer_head *bh)) | |
| { | |
| struct buffer_head *bh; | |
| unsigned block_start, block_end; | |
| unsigned blocksize = head->b_size; | |
| int err, ret = 0; | |
| struct buffer_head *next; | |
| for (bh = head, block_start = 0; | |
| ret == 0 && (bh != head || !block_start); | |
| block_start = block_end, bh = next) { | |
| next = bh->b_this_page; | |
| block_end = block_start + blocksize; | |
| if (block_end <= from || block_start >= to) { | |
| if (partial && !buffer_uptodate(bh)) | |
| *partial = 1; | |
| continue; | |
| } | |
| err = (*fn)(handle, bh); | |
| if (!ret) | |
| ret = err; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * To preserve ordering, it is essential that the hole instantiation and | |
| * the data write be encapsulated in a single transaction. We cannot | |
| * close off a transaction and start a new one between the ext4_get_block() | |
| * and the commit_write(). So doing the jbd2_journal_start at the start of | |
| * prepare_write() is the right place. | |
| * | |
| * Also, this function can nest inside ext4_writepage() -> | |
| * block_write_full_page(). In that case, we *know* that ext4_writepage() | |
| * has generated enough buffer credits to do the whole page. So we won't | |
| * block on the journal in that case, which is good, because the caller may | |
| * be PF_MEMALLOC. | |
| * | |
| * By accident, ext4 can be reentered when a transaction is open via | |
| * quota file writes. If we were to commit the transaction while thus | |
| * reentered, there can be a deadlock - we would be holding a quota | |
| * lock, and the commit would never complete if another thread had a | |
| * transaction open and was blocking on the quota lock - a ranking | |
| * violation. | |
| * | |
| * So what we do is to rely on the fact that jbd2_journal_stop/journal_start | |
| * will _not_ run commit under these circumstances because handle->h_ref | |
| * is elevated. We'll still have enough credits for the tiny quotafile | |
| * write. | |
| */ | |
| static int do_journal_get_write_access(handle_t *handle, | |
| struct buffer_head *bh) | |
| { | |
| if (!buffer_mapped(bh) || buffer_freed(bh)) | |
| return 0; | |
| return ext4_journal_get_write_access(handle, bh); | |
| } | |
| static int ext4_write_begin(struct file *file, struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned flags, | |
| struct page **pagep, void **fsdata) | |
| { | |
| struct inode *inode = mapping->host; | |
| int ret, needed_blocks; | |
| handle_t *handle; | |
| int retries = 0; | |
| struct page *page; | |
| pgoff_t index; | |
| unsigned from, to; | |
| trace_ext4_write_begin(inode, pos, len, flags); | |
| /* | |
| * Reserve one block more for addition to orphan list in case | |
| * we allocate blocks but write fails for some reason | |
| */ | |
| needed_blocks = ext4_writepage_trans_blocks(inode) + 1; | |
| index = pos >> PAGE_CACHE_SHIFT; | |
| from = pos & (PAGE_CACHE_SIZE - 1); | |
| to = from + len; | |
| retry: | |
| handle = ext4_journal_start(inode, needed_blocks); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| /* We cannot recurse into the filesystem as the transaction is already | |
| * started */ | |
| flags |= AOP_FLAG_NOFS; | |
| page = grab_cache_page_write_begin(mapping, index, flags); | |
| if (!page) { | |
| ext4_journal_stop(handle); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| *pagep = page; | |
| ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, | |
| ext4_get_block); | |
| if (!ret && ext4_should_journal_data(inode)) { | |
| ret = walk_page_buffers(handle, page_buffers(page), | |
| from, to, NULL, do_journal_get_write_access); | |
| } | |
| if (ret) { | |
| unlock_page(page); | |
| page_cache_release(page); | |
| /* | |
| * block_write_begin may have instantiated a few blocks | |
| * outside i_size. Trim these off again. Don't need | |
| * i_size_read because we hold i_mutex. | |
| * | |
| * Add inode to orphan list in case we crash before | |
| * truncate finishes | |
| */ | |
| if (pos + len > inode->i_size && ext4_can_truncate(inode)) | |
| ext4_orphan_add(handle, inode); | |
| ext4_journal_stop(handle); | |
| if (pos + len > inode->i_size) { | |
| ext4_truncate(inode); | |
| /* | |
| * If truncate failed early the inode might | |
| * still be on the orphan list; we need to | |
| * make sure the inode is removed from the | |
| * orphan list in that case. | |
| */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(NULL, inode); | |
| } | |
| } | |
| if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | |
| goto retry; | |
| out: | |
| return ret; | |
| } | |
| /* For write_end() in data=journal mode */ | |
| static int write_end_fn(handle_t *handle, struct buffer_head *bh) | |
| { | |
| if (!buffer_mapped(bh) || buffer_freed(bh)) | |
| return 0; | |
| set_buffer_uptodate(bh); | |
| return ext4_handle_dirty_metadata(handle, NULL, bh); | |
| } | |
| static int ext4_generic_write_end(struct file *file, | |
| struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned copied, | |
| struct page *page, void *fsdata) | |
| { | |
| int i_size_changed = 0; | |
| struct inode *inode = mapping->host; | |
| handle_t *handle = ext4_journal_current_handle(); | |
| copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); | |
| /* | |
| * No need to use i_size_read() here, the i_size | |
| * cannot change under us because we hold i_mutex. | |
| * | |
| * But it's important to update i_size while still holding page lock: | |
| * page writeout could otherwise come in and zero beyond i_size. | |
| */ | |
| if (pos + copied > inode->i_size) { | |
| i_size_write(inode, pos + copied); | |
| i_size_changed = 1; | |
| } | |
| if (pos + copied > EXT4_I(inode)->i_disksize) { | |
| /* We need to mark inode dirty even if | |
| * new_i_size is less that inode->i_size | |
| * bu greater than i_disksize.(hint delalloc) | |
| */ | |
| ext4_update_i_disksize(inode, (pos + copied)); | |
| i_size_changed = 1; | |
| } | |
| unlock_page(page); | |
| page_cache_release(page); | |
| /* | |
| * Don't mark the inode dirty under page lock. First, it unnecessarily | |
| * makes the holding time of page lock longer. Second, it forces lock | |
| * ordering of page lock and transaction start for journaling | |
| * filesystems. | |
| */ | |
| if (i_size_changed) | |
| ext4_mark_inode_dirty(handle, inode); | |
| return copied; | |
| } | |
| /* | |
| * We need to pick up the new inode size which generic_commit_write gave us | |
| * `file' can be NULL - eg, when called from page_symlink(). | |
| * | |
| * ext4 never places buffers on inode->i_mapping->private_list. metadata | |
| * buffers are managed internally. | |
| */ | |
| static int ext4_ordered_write_end(struct file *file, | |
| struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned copied, | |
| struct page *page, void *fsdata) | |
| { | |
| handle_t *handle = ext4_journal_current_handle(); | |
| struct inode *inode = mapping->host; | |
| int ret = 0, ret2; | |
| trace_ext4_ordered_write_end(inode, pos, len, copied); | |
| ret = ext4_jbd2_file_inode(handle, inode); | |
| if (ret == 0) { | |
| ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, | |
| page, fsdata); | |
| copied = ret2; | |
| if (pos + len > inode->i_size && ext4_can_truncate(inode)) | |
| /* if we have allocated more blocks and copied | |
| * less. We will have blocks allocated outside | |
| * inode->i_size. So truncate them | |
| */ | |
| ext4_orphan_add(handle, inode); | |
| if (ret2 < 0) | |
| ret = ret2; | |
| } | |
| ret2 = ext4_journal_stop(handle); | |
| if (!ret) | |
| ret = ret2; | |
| if (pos + len > inode->i_size) { | |
| ext4_truncate(inode); | |
| /* | |
| * If truncate failed early the inode might still be | |
| * on the orphan list; we need to make sure the inode | |
| * is removed from the orphan list in that case. | |
| */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(NULL, inode); | |
| } | |
| return ret ? ret : copied; | |
| } | |
| static int ext4_writeback_write_end(struct file *file, | |
| struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned copied, | |
| struct page *page, void *fsdata) | |
| { | |
| handle_t *handle = ext4_journal_current_handle(); | |
| struct inode *inode = mapping->host; | |
| int ret = 0, ret2; | |
| trace_ext4_writeback_write_end(inode, pos, len, copied); | |
| ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, | |
| page, fsdata); | |
| copied = ret2; | |
| if (pos + len > inode->i_size && ext4_can_truncate(inode)) | |
| /* if we have allocated more blocks and copied | |
| * less. We will have blocks allocated outside | |
| * inode->i_size. So truncate them | |
| */ | |
| ext4_orphan_add(handle, inode); | |
| if (ret2 < 0) | |
| ret = ret2; | |
| ret2 = ext4_journal_stop(handle); | |
| if (!ret) | |
| ret = ret2; | |
| if (pos + len > inode->i_size) { | |
| ext4_truncate(inode); | |
| /* | |
| * If truncate failed early the inode might still be | |
| * on the orphan list; we need to make sure the inode | |
| * is removed from the orphan list in that case. | |
| */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(NULL, inode); | |
| } | |
| return ret ? ret : copied; | |
| } | |
| static int ext4_journalled_write_end(struct file *file, | |
| struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned copied, | |
| struct page *page, void *fsdata) | |
| { | |
| handle_t *handle = ext4_journal_current_handle(); | |
| struct inode *inode = mapping->host; | |
| int ret = 0, ret2; | |
| int partial = 0; | |
| unsigned from, to; | |
| loff_t new_i_size; | |
| trace_ext4_journalled_write_end(inode, pos, len, copied); | |
| from = pos & (PAGE_CACHE_SIZE - 1); | |
| to = from + len; | |
| if (copied < len) { | |
| if (!PageUptodate(page)) | |
| copied = 0; | |
| page_zero_new_buffers(page, from+copied, to); | |
| } | |
| ret = walk_page_buffers(handle, page_buffers(page), from, | |
| to, &partial, write_end_fn); | |
| if (!partial) | |
| SetPageUptodate(page); | |
| new_i_size = pos + copied; | |
| if (new_i_size > inode->i_size) | |
| i_size_write(inode, pos+copied); | |
| EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; | |
| if (new_i_size > EXT4_I(inode)->i_disksize) { | |
| ext4_update_i_disksize(inode, new_i_size); | |
| ret2 = ext4_mark_inode_dirty(handle, inode); | |
| if (!ret) | |
| ret = ret2; | |
| } | |
| unlock_page(page); | |
| page_cache_release(page); | |
| if (pos + len > inode->i_size && ext4_can_truncate(inode)) | |
| /* if we have allocated more blocks and copied | |
| * less. We will have blocks allocated outside | |
| * inode->i_size. So truncate them | |
| */ | |
| ext4_orphan_add(handle, inode); | |
| ret2 = ext4_journal_stop(handle); | |
| if (!ret) | |
| ret = ret2; | |
| if (pos + len > inode->i_size) { | |
| ext4_truncate(inode); | |
| /* | |
| * If truncate failed early the inode might still be | |
| * on the orphan list; we need to make sure the inode | |
| * is removed from the orphan list in that case. | |
| */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(NULL, inode); | |
| } | |
| return ret ? ret : copied; | |
| } | |
| static int ext4_da_reserve_space(struct inode *inode, int nrblocks) | |
| { | |
| int retries = 0; | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| unsigned long md_needed, mdblocks, total = 0; | |
| /* | |
| * recalculate the amount of metadata blocks to reserve | |
| * in order to allocate nrblocks | |
| * worse case is one extent per block | |
| */ | |
| repeat: | |
| spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
| total = EXT4_I(inode)->i_reserved_data_blocks + nrblocks; | |
| mdblocks = ext4_calc_metadata_amount(inode, total); | |
| BUG_ON(mdblocks < EXT4_I(inode)->i_reserved_meta_blocks); | |
| md_needed = mdblocks - EXT4_I(inode)->i_reserved_meta_blocks; | |
| total = md_needed + nrblocks; | |
| /* | |
| * Make quota reservation here to prevent quota overflow | |
| * later. Real quota accounting is done at pages writeout | |
| * time. | |
| */ | |
| if (vfs_dq_reserve_block(inode, total)) { | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| return -EDQUOT; | |
| } | |
| if (ext4_claim_free_blocks(sbi, total)) { | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| vfs_dq_release_reservation_block(inode, total); | |
| if (ext4_should_retry_alloc(inode->i_sb, &retries)) { | |
| yield(); | |
| goto repeat; | |
| } | |
| return -ENOSPC; | |
| } | |
| EXT4_I(inode)->i_reserved_data_blocks += nrblocks; | |
| EXT4_I(inode)->i_reserved_meta_blocks = mdblocks; | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| return 0; /* success */ | |
| } | |
| static void ext4_da_release_space(struct inode *inode, int to_free) | |
| { | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| int total, mdb, mdb_free, release; | |
| if (!to_free) | |
| return; /* Nothing to release, exit */ | |
| spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
| if (!EXT4_I(inode)->i_reserved_data_blocks) { | |
| /* | |
| * if there is no reserved blocks, but we try to free some | |
| * then the counter is messed up somewhere. | |
| * but since this function is called from invalidate | |
| * page, it's harmless to return without any action | |
| */ | |
| printk(KERN_INFO "ext4 delalloc try to release %d reserved " | |
| "blocks for inode %lu, but there is no reserved " | |
| "data blocks\n", to_free, inode->i_ino); | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| return; | |
| } | |
| /* recalculate the number of metablocks still need to be reserved */ | |
| total = EXT4_I(inode)->i_reserved_data_blocks - to_free; | |
| mdb = ext4_calc_metadata_amount(inode, total); | |
| /* figure out how many metablocks to release */ | |
| BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | |
| mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; | |
| release = to_free + mdb_free; | |
| /* update fs dirty blocks counter for truncate case */ | |
| percpu_counter_sub(&sbi->s_dirtyblocks_counter, release); | |
| /* update per-inode reservations */ | |
| BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks); | |
| EXT4_I(inode)->i_reserved_data_blocks -= to_free; | |
| BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); | |
| EXT4_I(inode)->i_reserved_meta_blocks = mdb; | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| vfs_dq_release_reservation_block(inode, release); | |
| } | |
| static void ext4_da_page_release_reservation(struct page *page, | |
| unsigned long offset) | |
| { | |
| int to_release = 0; | |
| struct buffer_head *head, *bh; | |
| unsigned int curr_off = 0; | |
| head = page_buffers(page); | |
| bh = head; | |
| do { | |
| unsigned int next_off = curr_off + bh->b_size; | |
| if ((offset <= curr_off) && (buffer_delay(bh))) { | |
| to_release++; | |
| clear_buffer_delay(bh); | |
| } | |
| curr_off = next_off; | |
| } while ((bh = bh->b_this_page) != head); | |
| ext4_da_release_space(page->mapping->host, to_release); | |
| } | |
| /* | |
| * Delayed allocation stuff | |
| */ | |
| /* | |
| * mpage_da_submit_io - walks through extent of pages and try to write | |
| * them with writepage() call back | |
| * | |
| * @mpd->inode: inode | |
| * @mpd->first_page: first page of the extent | |
| * @mpd->next_page: page after the last page of the extent | |
| * | |
| * By the time mpage_da_submit_io() is called we expect all blocks | |
| * to be allocated. this may be wrong if allocation failed. | |
| * | |
| * As pages are already locked by write_cache_pages(), we can't use it | |
| */ | |
| static int mpage_da_submit_io(struct mpage_da_data *mpd) | |
| { | |
| long pages_skipped; | |
| struct pagevec pvec; | |
| unsigned long index, end; | |
| int ret = 0, err, nr_pages, i; | |
| struct inode *inode = mpd->inode; | |
| struct address_space *mapping = inode->i_mapping; | |
| BUG_ON(mpd->next_page <= mpd->first_page); | |
| /* | |
| * We need to start from the first_page to the next_page - 1 | |
| * to make sure we also write the mapped dirty buffer_heads. | |
| * If we look at mpd->b_blocknr we would only be looking | |
| * at the currently mapped buffer_heads. | |
| */ | |
| index = mpd->first_page; | |
| end = mpd->next_page - 1; | |
| pagevec_init(&pvec, 0); | |
| while (index <= end) { | |
| nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | |
| if (nr_pages == 0) | |
| break; | |
| for (i = 0; i < nr_pages; i++) { | |
| struct page *page = pvec.pages[i]; | |
| index = page->index; | |
| if (index > end) | |
| break; | |
| index++; | |
| BUG_ON(!PageLocked(page)); | |
| BUG_ON(PageWriteback(page)); | |
| pages_skipped = mpd->wbc->pages_skipped; | |
| err = mapping->a_ops->writepage(page, mpd->wbc); | |
| if (!err && (pages_skipped == mpd->wbc->pages_skipped)) | |
| /* | |
| * have successfully written the page | |
| * without skipping the same | |
| */ | |
| mpd->pages_written++; | |
| /* | |
| * In error case, we have to continue because | |
| * remaining pages are still locked | |
| * XXX: unlock and re-dirty them? | |
| */ | |
| if (ret == 0) | |
| ret = err; | |
| } | |
| pagevec_release(&pvec); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * mpage_put_bnr_to_bhs - walk blocks and assign them actual numbers | |
| * | |
| * @mpd->inode - inode to walk through | |
| * @exbh->b_blocknr - first block on a disk | |
| * @exbh->b_size - amount of space in bytes | |
| * @logical - first logical block to start assignment with | |
| * | |
| * the function goes through all passed space and put actual disk | |
| * block numbers into buffer heads, dropping BH_Delay and BH_Unwritten | |
| */ | |
| static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical, | |
| struct buffer_head *exbh) | |
| { | |
| struct inode *inode = mpd->inode; | |
| struct address_space *mapping = inode->i_mapping; | |
| int blocks = exbh->b_size >> inode->i_blkbits; | |
| sector_t pblock = exbh->b_blocknr, cur_logical; | |
| struct buffer_head *head, *bh; | |
| pgoff_t index, end; | |
| struct pagevec pvec; | |
| int nr_pages, i; | |
| index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
| end = (logical + blocks - 1) >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
| cur_logical = index << (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
| pagevec_init(&pvec, 0); | |
| while (index <= end) { | |
| /* XXX: optimize tail */ | |
| nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | |
| if (nr_pages == 0) | |
| break; | |
| for (i = 0; i < nr_pages; i++) { | |
| struct page *page = pvec.pages[i]; | |
| index = page->index; | |
| if (index > end) | |
| break; | |
| index++; | |
| BUG_ON(!PageLocked(page)); | |
| BUG_ON(PageWriteback(page)); | |
| BUG_ON(!page_has_buffers(page)); | |
| bh = page_buffers(page); | |
| head = bh; | |
| /* skip blocks out of the range */ | |
| do { | |
| if (cur_logical >= logical) | |
| break; | |
| cur_logical++; | |
| } while ((bh = bh->b_this_page) != head); | |
| do { | |
| if (cur_logical >= logical + blocks) | |
| break; | |
| if (buffer_delay(bh) || | |
| buffer_unwritten(bh)) { | |
| BUG_ON(bh->b_bdev != inode->i_sb->s_bdev); | |
| if (buffer_delay(bh)) { | |
| clear_buffer_delay(bh); | |
| bh->b_blocknr = pblock; | |
| } else { | |
| /* | |
| * unwritten already should have | |
| * blocknr assigned. Verify that | |
| */ | |
| clear_buffer_unwritten(bh); | |
| BUG_ON(bh->b_blocknr != pblock); | |
| } | |
| } else if (buffer_mapped(bh)) | |
| BUG_ON(bh->b_blocknr != pblock); | |
| cur_logical++; | |
| pblock++; | |
| } while ((bh = bh->b_this_page) != head); | |
| } | |
| pagevec_release(&pvec); | |
| } | |
| } | |
| /* | |
| * __unmap_underlying_blocks - just a helper function to unmap | |
| * set of blocks described by @bh | |
| */ | |
| static inline void __unmap_underlying_blocks(struct inode *inode, | |
| struct buffer_head *bh) | |
| { | |
| struct block_device *bdev = inode->i_sb->s_bdev; | |
| int blocks, i; | |
| blocks = bh->b_size >> inode->i_blkbits; | |
| for (i = 0; i < blocks; i++) | |
| unmap_underlying_metadata(bdev, bh->b_blocknr + i); | |
| } | |
| static void ext4_da_block_invalidatepages(struct mpage_da_data *mpd, | |
| sector_t logical, long blk_cnt) | |
| { | |
| int nr_pages, i; | |
| pgoff_t index, end; | |
| struct pagevec pvec; | |
| struct inode *inode = mpd->inode; | |
| struct address_space *mapping = inode->i_mapping; | |
| index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
| end = (logical + blk_cnt - 1) >> | |
| (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
| while (index <= end) { | |
| nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | |
| if (nr_pages == 0) | |
| break; | |
| for (i = 0; i < nr_pages; i++) { | |
| struct page *page = pvec.pages[i]; | |
| index = page->index; | |
| if (index > end) | |
| break; | |
| index++; | |
| BUG_ON(!PageLocked(page)); | |
| BUG_ON(PageWriteback(page)); | |
| block_invalidatepage(page, 0); | |
| ClearPageUptodate(page); | |
| unlock_page(page); | |
| } | |
| } | |
| return; | |
| } | |
| static void ext4_print_free_blocks(struct inode *inode) | |
| { | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| printk(KERN_CRIT "Total free blocks count %lld\n", | |
| ext4_count_free_blocks(inode->i_sb)); | |
| printk(KERN_CRIT "Free/Dirty block details\n"); | |
| printk(KERN_CRIT "free_blocks=%lld\n", | |
| (long long) percpu_counter_sum(&sbi->s_freeblocks_counter)); | |
| printk(KERN_CRIT "dirty_blocks=%lld\n", | |
| (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter)); | |
| printk(KERN_CRIT "Block reservation details\n"); | |
| printk(KERN_CRIT "i_reserved_data_blocks=%u\n", | |
| EXT4_I(inode)->i_reserved_data_blocks); | |
| printk(KERN_CRIT "i_reserved_meta_blocks=%u\n", | |
| EXT4_I(inode)->i_reserved_meta_blocks); | |
| return; | |
| } | |
| /* | |
| * mpage_da_map_blocks - go through given space | |
| * | |
| * @mpd - bh describing space | |
| * | |
| * The function skips space we know is already mapped to disk blocks. | |
| * | |
| */ | |
| static int mpage_da_map_blocks(struct mpage_da_data *mpd) | |
| { | |
| int err, blks, get_blocks_flags; | |
| struct buffer_head new; | |
| sector_t next = mpd->b_blocknr; | |
| unsigned max_blocks = mpd->b_size >> mpd->inode->i_blkbits; | |
| loff_t disksize = EXT4_I(mpd->inode)->i_disksize; | |
| handle_t *handle = NULL; | |
| /* | |
| * We consider only non-mapped and non-allocated blocks | |
| */ | |
| if ((mpd->b_state & (1 << BH_Mapped)) && | |
| !(mpd->b_state & (1 << BH_Delay)) && | |
| !(mpd->b_state & (1 << BH_Unwritten))) | |
| return 0; | |
| /* | |
| * If we didn't accumulate anything to write simply return | |
| */ | |
| if (!mpd->b_size) | |
| return 0; | |
| handle = ext4_journal_current_handle(); | |
| BUG_ON(!handle); | |
| /* | |
| * Call ext4_get_blocks() to allocate any delayed allocation | |
| * blocks, or to convert an uninitialized extent to be | |
| * initialized (in the case where we have written into | |
| * one or more preallocated blocks). | |
| * | |
| * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE to | |
| * indicate that we are on the delayed allocation path. This | |
| * affects functions in many different parts of the allocation | |
| * call path. This flag exists primarily because we don't | |
| * want to change *many* call functions, so ext4_get_blocks() | |
| * will set the magic i_delalloc_reserved_flag once the | |
| * inode's allocation semaphore is taken. | |
| * | |
| * If the blocks in questions were delalloc blocks, set | |
| * EXT4_GET_BLOCKS_DELALLOC_RESERVE so the delalloc accounting | |
| * variables are updated after the blocks have been allocated. | |
| */ | |
| new.b_state = 0; | |
| get_blocks_flags = (EXT4_GET_BLOCKS_CREATE | | |
| EXT4_GET_BLOCKS_DELALLOC_RESERVE); | |
| if (mpd->b_state & (1 << BH_Delay)) | |
| get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE; | |
| blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks, | |
| &new, get_blocks_flags); | |
| if (blks < 0) { | |
| err = blks; | |
| /* | |
| * If get block returns with error we simply | |
| * return. Later writepage will redirty the page and | |
| * writepages will find the dirty page again | |
| */ | |
| if (err == -EAGAIN) | |
| return 0; | |
| if (err == -ENOSPC && | |
| ext4_count_free_blocks(mpd->inode->i_sb)) { | |
| mpd->retval = err; | |
| return 0; | |
| } | |
| /* | |
| * get block failure will cause us to loop in | |
| * writepages, because a_ops->writepage won't be able | |
| * to make progress. The page will be redirtied by | |
| * writepage and writepages will again try to write | |
| * the same. | |
| */ | |
| ext4_msg(mpd->inode->i_sb, KERN_CRIT, | |
| "delayed block allocation failed for inode %lu at " | |
| "logical offset %llu with max blocks %zd with " | |
| "error %d\n", mpd->inode->i_ino, | |
| (unsigned long long) next, | |
| mpd->b_size >> mpd->inode->i_blkbits, err); | |
| printk(KERN_CRIT "This should not happen!! " | |
| "Data will be lost\n"); | |
| if (err == -ENOSPC) { | |
| ext4_print_free_blocks(mpd->inode); | |
| } | |
| /* invalidate all the pages */ | |
| ext4_da_block_invalidatepages(mpd, next, | |
| mpd->b_size >> mpd->inode->i_blkbits); | |
| return err; | |
| } | |
| BUG_ON(blks == 0); | |
| new.b_size = (blks << mpd->inode->i_blkbits); | |
| if (buffer_new(&new)) | |
| __unmap_underlying_blocks(mpd->inode, &new); | |
| /* | |
| * If blocks are delayed marked, we need to | |
| * put actual blocknr and drop delayed bit | |
| */ | |
| if ((mpd->b_state & (1 << BH_Delay)) || | |
| (mpd->b_state & (1 << BH_Unwritten))) | |
| mpage_put_bnr_to_bhs(mpd, next, &new); | |
| if (ext4_should_order_data(mpd->inode)) { | |
| err = ext4_jbd2_file_inode(handle, mpd->inode); | |
| if (err) | |
| return err; | |
| } | |
| /* | |
| * Update on-disk size along with block allocation. | |
| */ | |
| disksize = ((loff_t) next + blks) << mpd->inode->i_blkbits; | |
| if (disksize > i_size_read(mpd->inode)) | |
| disksize = i_size_read(mpd->inode); | |
| if (disksize > EXT4_I(mpd->inode)->i_disksize) { | |
| ext4_update_i_disksize(mpd->inode, disksize); | |
| return ext4_mark_inode_dirty(handle, mpd->inode); | |
| } | |
| return 0; | |
| } | |
| #define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \ | |
| (1 << BH_Delay) | (1 << BH_Unwritten)) | |
| /* | |
| * mpage_add_bh_to_extent - try to add one more block to extent of blocks | |
| * | |
| * @mpd->lbh - extent of blocks | |
| * @logical - logical number of the block in the file | |
| * @bh - bh of the block (used to access block's state) | |
| * | |
| * the function is used to collect contig. blocks in same state | |
| */ | |
| static void mpage_add_bh_to_extent(struct mpage_da_data *mpd, | |
| sector_t logical, size_t b_size, | |
| unsigned long b_state) | |
| { | |
| sector_t next; | |
| int nrblocks = mpd->b_size >> mpd->inode->i_blkbits; | |
| /* check if thereserved journal credits might overflow */ | |
| if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) { | |
| if (nrblocks >= EXT4_MAX_TRANS_DATA) { | |
| /* | |
| * With non-extent format we are limited by the journal | |
| * credit available. Total credit needed to insert | |
| * nrblocks contiguous blocks is dependent on the | |
| * nrblocks. So limit nrblocks. | |
| */ | |
| goto flush_it; | |
| } else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) > | |
| EXT4_MAX_TRANS_DATA) { | |
| /* | |
| * Adding the new buffer_head would make it cross the | |
| * allowed limit for which we have journal credit | |
| * reserved. So limit the new bh->b_size | |
| */ | |
| b_size = (EXT4_MAX_TRANS_DATA - nrblocks) << | |
| mpd->inode->i_blkbits; | |
| /* we will do mpage_da_submit_io in the next loop */ | |
| } | |
| } | |
| /* | |
| * First block in the extent | |
| */ | |
| if (mpd->b_size == 0) { | |
| mpd->b_blocknr = logical; | |
| mpd->b_size = b_size; | |
| mpd->b_state = b_state & BH_FLAGS; | |
| return; | |
| } | |
| next = mpd->b_blocknr + nrblocks; | |
| /* | |
| * Can we merge the block to our big extent? | |
| */ | |
| if (logical == next && (b_state & BH_FLAGS) == mpd->b_state) { | |
| mpd->b_size += b_size; | |
| return; | |
| } | |
| flush_it: | |
| /* | |
| * We couldn't merge the block to our extent, so we | |
| * need to flush current extent and start new one | |
| */ | |
| if (mpage_da_map_blocks(mpd) == 0) | |
| mpage_da_submit_io(mpd); | |
| mpd->io_done = 1; | |
| return; | |
| } | |
| static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh) | |
| { | |
| return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh); | |
| } | |
| /* | |
| * __mpage_da_writepage - finds extent of pages and blocks | |
| * | |
| * @page: page to consider | |
| * @wbc: not used, we just follow rules | |
| * @data: context | |
| * | |
| * The function finds extents of pages and scan them for all blocks. | |
| */ | |
| static int __mpage_da_writepage(struct page *page, | |
| struct writeback_control *wbc, void *data) | |
| { | |
| struct mpage_da_data *mpd = data; | |
| struct inode *inode = mpd->inode; | |
| struct buffer_head *bh, *head; | |
| sector_t logical; | |
| if (mpd->io_done) { | |
| /* | |
| * Rest of the page in the page_vec | |
| * redirty then and skip then. We will | |
| * try to write them again after | |
| * starting a new transaction | |
| */ | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| return MPAGE_DA_EXTENT_TAIL; | |
| } | |
| /* | |
| * Can we merge this page to current extent? | |
| */ | |
| if (mpd->next_page != page->index) { | |
| /* | |
| * Nope, we can't. So, we map non-allocated blocks | |
| * and start IO on them using writepage() | |
| */ | |
| if (mpd->next_page != mpd->first_page) { | |
| if (mpage_da_map_blocks(mpd) == 0) | |
| mpage_da_submit_io(mpd); | |
| /* | |
| * skip rest of the page in the page_vec | |
| */ | |
| mpd->io_done = 1; | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| return MPAGE_DA_EXTENT_TAIL; | |
| } | |
| /* | |
| * Start next extent of pages ... | |
| */ | |
| mpd->first_page = page->index; | |
| /* | |
| * ... and blocks | |
| */ | |
| mpd->b_size = 0; | |
| mpd->b_state = 0; | |
| mpd->b_blocknr = 0; | |
| } | |
| mpd->next_page = page->index + 1; | |
| logical = (sector_t) page->index << | |
| (PAGE_CACHE_SHIFT - inode->i_blkbits); | |
| if (!page_has_buffers(page)) { | |
| mpage_add_bh_to_extent(mpd, logical, PAGE_CACHE_SIZE, | |
| (1 << BH_Dirty) | (1 << BH_Uptodate)); | |
| if (mpd->io_done) | |
| return MPAGE_DA_EXTENT_TAIL; | |
| } else { | |
| /* | |
| * Page with regular buffer heads, just add all dirty ones | |
| */ | |
| head = page_buffers(page); | |
| bh = head; | |
| do { | |
| BUG_ON(buffer_locked(bh)); | |
| /* | |
| * We need to try to allocate | |
| * unmapped blocks in the same page. | |
| * Otherwise we won't make progress | |
| * with the page in ext4_writepage | |
| */ | |
| if (ext4_bh_delay_or_unwritten(NULL, bh)) { | |
| mpage_add_bh_to_extent(mpd, logical, | |
| bh->b_size, | |
| bh->b_state); | |
| if (mpd->io_done) | |
| return MPAGE_DA_EXTENT_TAIL; | |
| } else if (buffer_dirty(bh) && (buffer_mapped(bh))) { | |
| /* | |
| * mapped dirty buffer. We need to update | |
| * the b_state because we look at | |
| * b_state in mpage_da_map_blocks. We don't | |
| * update b_size because if we find an | |
| * unmapped buffer_head later we need to | |
| * use the b_state flag of that buffer_head. | |
| */ | |
| if (mpd->b_size == 0) | |
| mpd->b_state = bh->b_state & BH_FLAGS; | |
| } | |
| logical++; | |
| } while ((bh = bh->b_this_page) != head); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This is a special get_blocks_t callback which is used by | |
| * ext4_da_write_begin(). It will either return mapped block or | |
| * reserve space for a single block. | |
| * | |
| * For delayed buffer_head we have BH_Mapped, BH_New, BH_Delay set. | |
| * We also have b_blocknr = -1 and b_bdev initialized properly | |
| * | |
| * For unwritten buffer_head we have BH_Mapped, BH_New, BH_Unwritten set. | |
| * We also have b_blocknr = physicalblock mapping unwritten extent and b_bdev | |
| * initialized properly. | |
| */ | |
| static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, | |
| struct buffer_head *bh_result, int create) | |
| { | |
| int ret = 0; | |
| sector_t invalid_block = ~((sector_t) 0xffff); | |
| if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es)) | |
| invalid_block = ~0; | |
| BUG_ON(create == 0); | |
| BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | |
| /* | |
| * first, we need to know whether the block is allocated already | |
| * preallocated blocks are unmapped but should treated | |
| * the same as allocated blocks. | |
| */ | |
| ret = ext4_get_blocks(NULL, inode, iblock, 1, bh_result, 0); | |
| if ((ret == 0) && !buffer_delay(bh_result)) { | |
| /* the block isn't (pre)allocated yet, let's reserve space */ | |
| /* | |
| * XXX: __block_prepare_write() unmaps passed block, | |
| * is it OK? | |
| */ | |
| ret = ext4_da_reserve_space(inode, 1); | |
| if (ret) | |
| /* not enough space to reserve */ | |
| return ret; | |
| map_bh(bh_result, inode->i_sb, invalid_block); | |
| set_buffer_new(bh_result); | |
| set_buffer_delay(bh_result); | |
| } else if (ret > 0) { | |
| bh_result->b_size = (ret << inode->i_blkbits); | |
| if (buffer_unwritten(bh_result)) { | |
| /* A delayed write to unwritten bh should | |
| * be marked new and mapped. Mapped ensures | |
| * that we don't do get_block multiple times | |
| * when we write to the same offset and new | |
| * ensures that we do proper zero out for | |
| * partial write. | |
| */ | |
| set_buffer_new(bh_result); | |
| set_buffer_mapped(bh_result); | |
| } | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * This function is used as a standard get_block_t calback function | |
| * when there is no desire to allocate any blocks. It is used as a | |
| * callback function for block_prepare_write(), nobh_writepage(), and | |
| * block_write_full_page(). These functions should only try to map a | |
| * single block at a time. | |
| * | |
| * Since this function doesn't do block allocations even if the caller | |
| * requests it by passing in create=1, it is critically important that | |
| * any caller checks to make sure that any buffer heads are returned | |
| * by this function are either all already mapped or marked for | |
| * delayed allocation before calling nobh_writepage() or | |
| * block_write_full_page(). Otherwise, b_blocknr could be left | |
| * unitialized, and the page write functions will be taken by | |
| * surprise. | |
| */ | |
| static int noalloc_get_block_write(struct inode *inode, sector_t iblock, | |
| struct buffer_head *bh_result, int create) | |
| { | |
| int ret = 0; | |
| unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | |
| BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | |
| /* | |
| * we don't want to do block allocation in writepage | |
| * so call get_block_wrap with create = 0 | |
| */ | |
| ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0); | |
| if (ret > 0) { | |
| bh_result->b_size = (ret << inode->i_blkbits); | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| static int bget_one(handle_t *handle, struct buffer_head *bh) | |
| { | |
| get_bh(bh); | |
| return 0; | |
| } | |
| static int bput_one(handle_t *handle, struct buffer_head *bh) | |
| { | |
| put_bh(bh); | |
| return 0; | |
| } | |
| static int __ext4_journalled_writepage(struct page *page, | |
| struct writeback_control *wbc, | |
| unsigned int len) | |
| { | |
| struct address_space *mapping = page->mapping; | |
| struct inode *inode = mapping->host; | |
| struct buffer_head *page_bufs; | |
| handle_t *handle = NULL; | |
| int ret = 0; | |
| int err; | |
| page_bufs = page_buffers(page); | |
| BUG_ON(!page_bufs); | |
| walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); | |
| /* As soon as we unlock the page, it can go away, but we have | |
| * references to buffers so we are safe */ | |
| unlock_page(page); | |
| handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode)); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| ret = walk_page_buffers(handle, page_bufs, 0, len, NULL, | |
| do_journal_get_write_access); | |
| err = walk_page_buffers(handle, page_bufs, 0, len, NULL, | |
| write_end_fn); | |
| if (ret == 0) | |
| ret = err; | |
| err = ext4_journal_stop(handle); | |
| if (!ret) | |
| ret = err; | |
| walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); | |
| EXT4_I(inode)->i_state |= EXT4_STATE_JDATA; | |
| out: | |
| return ret; | |
| } | |
| /* | |
| * Note that we don't need to start a transaction unless we're journaling data | |
| * because we should have holes filled from ext4_page_mkwrite(). We even don't | |
| * need to file the inode to the transaction's list in ordered mode because if | |
| * we are writing back data added by write(), the inode is already there and if | |
| * we are writing back data modified via mmap(), noone guarantees in which | |
| * transaction the data will hit the disk. In case we are journaling data, we | |
| * cannot start transaction directly because transaction start ranks above page | |
| * lock so we have to do some magic. | |
| * | |
| * This function can get called via... | |
| * - ext4_da_writepages after taking page lock (have journal handle) | |
| * - journal_submit_inode_data_buffers (no journal handle) | |
| * - shrink_page_list via pdflush (no journal handle) | |
| * - grab_page_cache when doing write_begin (have journal handle) | |
| * | |
| * We don't do any block allocation in this function. If we have page with | |
| * multiple blocks we need to write those buffer_heads that are mapped. This | |
| * is important for mmaped based write. So if we do with blocksize 1K | |
| * truncate(f, 1024); | |
| * a = mmap(f, 0, 4096); | |
| * a[0] = 'a'; | |
| * truncate(f, 4096); | |
| * we have in the page first buffer_head mapped via page_mkwrite call back | |
| * but other bufer_heads would be unmapped but dirty(dirty done via the | |
| * do_wp_page). So writepage should write the first block. If we modify | |
| * the mmap area beyond 1024 we will again get a page_fault and the | |
| * page_mkwrite callback will do the block allocation and mark the | |
| * buffer_heads mapped. | |
| * | |
| * We redirty the page if we have any buffer_heads that is either delay or | |
| * unwritten in the page. | |
| * | |
| * We can get recursively called as show below. | |
| * | |
| * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> | |
| * ext4_writepage() | |
| * | |
| * But since we don't do any block allocation we should not deadlock. | |
| * Page also have the dirty flag cleared so we don't get recurive page_lock. | |
| */ | |
| static int ext4_writepage(struct page *page, | |
| struct writeback_control *wbc) | |
| { | |
| int ret = 0; | |
| loff_t size; | |
| unsigned int len; | |
| struct buffer_head *page_bufs; | |
| struct inode *inode = page->mapping->host; | |
| trace_ext4_writepage(inode, page); | |
| size = i_size_read(inode); | |
| if (page->index == size >> PAGE_CACHE_SHIFT) | |
| len = size & ~PAGE_CACHE_MASK; | |
| else | |
| len = PAGE_CACHE_SIZE; | |
| if (page_has_buffers(page)) { | |
| page_bufs = page_buffers(page); | |
| if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | |
| ext4_bh_delay_or_unwritten)) { | |
| /* | |
| * We don't want to do block allocation | |
| * So redirty the page and return | |
| * We may reach here when we do a journal commit | |
| * via journal_submit_inode_data_buffers. | |
| * If we don't have mapping block we just ignore | |
| * them. We can also reach here via shrink_page_list | |
| */ | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| return 0; | |
| } | |
| } else { | |
| /* | |
| * The test for page_has_buffers() is subtle: | |
| * We know the page is dirty but it lost buffers. That means | |
| * that at some moment in time after write_begin()/write_end() | |
| * has been called all buffers have been clean and thus they | |
| * must have been written at least once. So they are all | |
| * mapped and we can happily proceed with mapping them | |
| * and writing the page. | |
| * | |
| * Try to initialize the buffer_heads and check whether | |
| * all are mapped and non delay. We don't want to | |
| * do block allocation here. | |
| */ | |
| ret = block_prepare_write(page, 0, len, | |
| noalloc_get_block_write); | |
| if (!ret) { | |
| page_bufs = page_buffers(page); | |
| /* check whether all are mapped and non delay */ | |
| if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | |
| ext4_bh_delay_or_unwritten)) { | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| return 0; | |
| } | |
| } else { | |
| /* | |
| * We can't do block allocation here | |
| * so just redity the page and unlock | |
| * and return | |
| */ | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| return 0; | |
| } | |
| /* now mark the buffer_heads as dirty and uptodate */ | |
| block_commit_write(page, 0, len); | |
| } | |
| if (PageChecked(page) && ext4_should_journal_data(inode)) { | |
| /* | |
| * It's mmapped pagecache. Add buffers and journal it. There | |
| * doesn't seem much point in redirtying the page here. | |
| */ | |
| ClearPageChecked(page); | |
| return __ext4_journalled_writepage(page, wbc, len); | |
| } | |
| if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) | |
| ret = nobh_writepage(page, noalloc_get_block_write, wbc); | |
| else | |
| ret = block_write_full_page(page, noalloc_get_block_write, | |
| wbc); | |
| return ret; | |
| } | |
| /* | |
| * This is called via ext4_da_writepages() to | |
| * calulate the total number of credits to reserve to fit | |
| * a single extent allocation into a single transaction, | |
| * ext4_da_writpeages() will loop calling this before | |
| * the block allocation. | |
| */ | |
| static int ext4_da_writepages_trans_blocks(struct inode *inode) | |
| { | |
| int max_blocks = EXT4_I(inode)->i_reserved_data_blocks; | |
| /* | |
| * With non-extent format the journal credit needed to | |
| * insert nrblocks contiguous block is dependent on | |
| * number of contiguous block. So we will limit | |
| * number of contiguous block to a sane value | |
| */ | |
| if (!(inode->i_flags & EXT4_EXTENTS_FL) && | |
| (max_blocks > EXT4_MAX_TRANS_DATA)) | |
| max_blocks = EXT4_MAX_TRANS_DATA; | |
| return ext4_chunk_trans_blocks(inode, max_blocks); | |
| } | |
| static int ext4_da_writepages(struct address_space *mapping, | |
| struct writeback_control *wbc) | |
| { | |
| pgoff_t index; | |
| int range_whole = 0; | |
| handle_t *handle = NULL; | |
| struct mpage_da_data mpd; | |
| struct inode *inode = mapping->host; | |
| int no_nrwrite_index_update; | |
| int pages_written = 0; | |
| long pages_skipped; | |
| unsigned int max_pages; | |
| int range_cyclic, cycled = 1, io_done = 0; | |
| int needed_blocks, ret = 0; | |
| long desired_nr_to_write, nr_to_writebump = 0; | |
| loff_t range_start = wbc->range_start; | |
| struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb); | |
| trace_ext4_da_writepages(inode, wbc); | |
| /* | |
| * No pages to write? This is mainly a kludge to avoid starting | |
| * a transaction for special inodes like journal inode on last iput() | |
| * because that could violate lock ordering on umount | |
| */ | |
| if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) | |
| return 0; | |
| /* | |
| * If the filesystem has aborted, it is read-only, so return | |
| * right away instead of dumping stack traces later on that | |
| * will obscure the real source of the problem. We test | |
| * EXT4_MF_FS_ABORTED instead of sb->s_flag's MS_RDONLY because | |
| * the latter could be true if the filesystem is mounted | |
| * read-only, and in that case, ext4_da_writepages should | |
| * *never* be called, so if that ever happens, we would want | |
| * the stack trace. | |
| */ | |
| if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED)) | |
| return -EROFS; | |
| if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) | |
| range_whole = 1; | |
| range_cyclic = wbc->range_cyclic; | |
| if (wbc->range_cyclic) { | |
| index = mapping->writeback_index; | |
| if (index) | |
| cycled = 0; | |
| wbc->range_start = index << PAGE_CACHE_SHIFT; | |
| wbc->range_end = LLONG_MAX; | |
| wbc->range_cyclic = 0; | |
| } else | |
| index = wbc->range_start >> PAGE_CACHE_SHIFT; | |
| /* | |
| * This works around two forms of stupidity. The first is in | |
| * the writeback code, which caps the maximum number of pages | |
| * written to be 1024 pages. This is wrong on multiple | |
| * levels; different architectues have a different page size, | |
| * which changes the maximum amount of data which gets | |
| * written. Secondly, 4 megabytes is way too small. XFS | |
| * forces this value to be 16 megabytes by multiplying | |
| * nr_to_write parameter by four, and then relies on its | |
| * allocator to allocate larger extents to make them | |
| * contiguous. Unfortunately this brings us to the second | |
| * stupidity, which is that ext4's mballoc code only allocates | |
| * at most 2048 blocks. So we force contiguous writes up to | |
| * the number of dirty blocks in the inode, or | |
| * sbi->max_writeback_mb_bump whichever is smaller. | |
| */ | |
| max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT); | |
| if (!range_cyclic && range_whole) | |
| desired_nr_to_write = wbc->nr_to_write * 8; | |
| else | |
| desired_nr_to_write = ext4_num_dirty_pages(inode, index, | |
| max_pages); | |
| if (desired_nr_to_write > max_pages) | |
| desired_nr_to_write = max_pages; | |
| if (wbc->nr_to_write < desired_nr_to_write) { | |
| nr_to_writebump = desired_nr_to_write - wbc->nr_to_write; | |
| wbc->nr_to_write = desired_nr_to_write; | |
| } | |
| mpd.wbc = wbc; | |
| mpd.inode = mapping->host; | |
| /* | |
| * we don't want write_cache_pages to update | |
| * nr_to_write and writeback_index | |
| */ | |
| no_nrwrite_index_update = wbc->no_nrwrite_index_update; | |
| wbc->no_nrwrite_index_update = 1; | |
| pages_skipped = wbc->pages_skipped; | |
| retry: | |
| while (!ret && wbc->nr_to_write > 0) { | |
| /* | |
| * we insert one extent at a time. So we need | |
| * credit needed for single extent allocation. | |
| * journalled mode is currently not supported | |
| * by delalloc | |
| */ | |
| BUG_ON(ext4_should_journal_data(inode)); | |
| needed_blocks = ext4_da_writepages_trans_blocks(inode); | |
| /* start a new transaction*/ | |
| handle = ext4_journal_start(inode, needed_blocks); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " | |
| "%ld pages, ino %lu; err %d\n", __func__, | |
| wbc->nr_to_write, inode->i_ino, ret); | |
| goto out_writepages; | |
| } | |
| /* | |
| * Now call __mpage_da_writepage to find the next | |
| * contiguous region of logical blocks that need | |
| * blocks to be allocated by ext4. We don't actually | |
| * submit the blocks for I/O here, even though | |
| * write_cache_pages thinks it will, and will set the | |
| * pages as clean for write before calling | |
| * __mpage_da_writepage(). | |
| */ | |
| mpd.b_size = 0; | |
| mpd.b_state = 0; | |
| mpd.b_blocknr = 0; | |
| mpd.first_page = 0; | |
| mpd.next_page = 0; | |
| mpd.io_done = 0; | |
| mpd.pages_written = 0; | |
| mpd.retval = 0; | |
| ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, | |
| &mpd); | |
| /* | |
| * If we have a contigous extent of pages and we | |
| * haven't done the I/O yet, map the blocks and submit | |
| * them for I/O. | |
| */ | |
| if (!mpd.io_done && mpd.next_page != mpd.first_page) { | |
| if (mpage_da_map_blocks(&mpd) == 0) | |
| mpage_da_submit_io(&mpd); | |
| mpd.io_done = 1; | |
| ret = MPAGE_DA_EXTENT_TAIL; | |
| } | |
| trace_ext4_da_write_pages(inode, &mpd); | |
| wbc->nr_to_write -= mpd.pages_written; | |
| ext4_journal_stop(handle); | |
| if ((mpd.retval == -ENOSPC) && sbi->s_journal) { | |
| /* commit the transaction which would | |
| * free blocks released in the transaction | |
| * and try again | |
| */ | |
| jbd2_journal_force_commit_nested(sbi->s_journal); | |
| wbc->pages_skipped = pages_skipped; | |
| ret = 0; | |
| } else if (ret == MPAGE_DA_EXTENT_TAIL) { | |
| /* | |
| * got one extent now try with | |
| * rest of the pages | |
| */ | |
| pages_written += mpd.pages_written; | |
| wbc->pages_skipped = pages_skipped; | |
| ret = 0; | |
| io_done = 1; | |
| } else if (wbc->nr_to_write) | |
| /* | |
| * There is no more writeout needed | |
| * or we requested for a noblocking writeout | |
| * and we found the device congested | |
| */ | |
| break; | |
| } | |
| if (!io_done && !cycled) { | |
| cycled = 1; | |
| index = 0; | |
| wbc->range_start = index << PAGE_CACHE_SHIFT; | |
| wbc->range_end = mapping->writeback_index - 1; | |
| goto retry; | |
| } | |
| if (pages_skipped != wbc->pages_skipped) | |
| ext4_msg(inode->i_sb, KERN_CRIT, | |
| "This should not happen leaving %s " | |
| "with nr_to_write = %ld ret = %d\n", | |
| __func__, wbc->nr_to_write, ret); | |
| /* Update index */ | |
| index += pages_written; | |
| wbc->range_cyclic = range_cyclic; | |
| if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) | |
| /* | |
| * set the writeback_index so that range_cyclic | |
| * mode will write it back later | |
| */ | |
| mapping->writeback_index = index; | |
| out_writepages: | |
| if (!no_nrwrite_index_update) | |
| wbc->no_nrwrite_index_update = 0; | |
| if (wbc->nr_to_write > nr_to_writebump) | |
| wbc->nr_to_write -= nr_to_writebump; | |
| wbc->range_start = range_start; | |
| trace_ext4_da_writepages_result(inode, wbc, ret, pages_written); | |
| return ret; | |
| } | |
| #define FALL_BACK_TO_NONDELALLOC 1 | |
| static int ext4_nonda_switch(struct super_block *sb) | |
| { | |
| s64 free_blocks, dirty_blocks; | |
| struct ext4_sb_info *sbi = EXT4_SB(sb); | |
| /* | |
| * switch to non delalloc mode if we are running low | |
| * on free block. The free block accounting via percpu | |
| * counters can get slightly wrong with percpu_counter_batch getting | |
| * accumulated on each CPU without updating global counters | |
| * Delalloc need an accurate free block accounting. So switch | |
| * to non delalloc when we are near to error range. | |
| */ | |
| free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter); | |
| dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyblocks_counter); | |
| if (2 * free_blocks < 3 * dirty_blocks || | |
| free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) { | |
| /* | |
| * free block count is less that 150% of dirty blocks | |
| * or free blocks is less that watermark | |
| */ | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int ext4_da_write_begin(struct file *file, struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned flags, | |
| struct page **pagep, void **fsdata) | |
| { | |
| int ret, retries = 0; | |
| struct page *page; | |
| pgoff_t index; | |
| unsigned from, to; | |
| struct inode *inode = mapping->host; | |
| handle_t *handle; | |
| index = pos >> PAGE_CACHE_SHIFT; | |
| from = pos & (PAGE_CACHE_SIZE - 1); | |
| to = from + len; | |
| if (ext4_nonda_switch(inode->i_sb)) { | |
| *fsdata = (void *)FALL_BACK_TO_NONDELALLOC; | |
| return ext4_write_begin(file, mapping, pos, | |
| len, flags, pagep, fsdata); | |
| } | |
| *fsdata = (void *)0; | |
| trace_ext4_da_write_begin(inode, pos, len, flags); | |
| retry: | |
| /* | |
| * With delayed allocation, we don't log the i_disksize update | |
| * if there is delayed block allocation. But we still need | |
| * to journalling the i_disksize update if writes to the end | |
| * of file which has an already mapped buffer. | |
| */ | |
| handle = ext4_journal_start(inode, 1); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| /* We cannot recurse into the filesystem as the transaction is already | |
| * started */ | |
| flags |= AOP_FLAG_NOFS; | |
| page = grab_cache_page_write_begin(mapping, index, flags); | |
| if (!page) { | |
| ext4_journal_stop(handle); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| *pagep = page; | |
| ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, | |
| ext4_da_get_block_prep); | |
| if (ret < 0) { | |
| unlock_page(page); | |
| ext4_journal_stop(handle); | |
| page_cache_release(page); | |
| /* | |
| * block_write_begin may have instantiated a few blocks | |
| * outside i_size. Trim these off again. Don't need | |
| * i_size_read because we hold i_mutex. | |
| */ | |
| if (pos + len > inode->i_size) | |
| ext4_truncate(inode); | |
| } | |
| if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | |
| goto retry; | |
| out: | |
| return ret; | |
| } | |
| /* | |
| * Check if we should update i_disksize | |
| * when write to the end of file but not require block allocation | |
| */ | |
| static int ext4_da_should_update_i_disksize(struct page *page, | |
| unsigned long offset) | |
| { | |
| struct buffer_head *bh; | |
| struct inode *inode = page->mapping->host; | |
| unsigned int idx; | |
| int i; | |
| bh = page_buffers(page); | |
| idx = offset >> inode->i_blkbits; | |
| for (i = 0; i < idx; i++) | |
| bh = bh->b_this_page; | |
| if (!buffer_mapped(bh) || (buffer_delay(bh)) || buffer_unwritten(bh)) | |
| return 0; | |
| return 1; | |
| } | |
| static int ext4_da_write_end(struct file *file, | |
| struct address_space *mapping, | |
| loff_t pos, unsigned len, unsigned copied, | |
| struct page *page, void *fsdata) | |
| { | |
| struct inode *inode = mapping->host; | |
| int ret = 0, ret2; | |
| handle_t *handle = ext4_journal_current_handle(); | |
| loff_t new_i_size; | |
| unsigned long start, end; | |
| int write_mode = (int)(unsigned long)fsdata; | |
| if (write_mode == FALL_BACK_TO_NONDELALLOC) { | |
| if (ext4_should_order_data(inode)) { | |
| return ext4_ordered_write_end(file, mapping, pos, | |
| len, copied, page, fsdata); | |
| } else if (ext4_should_writeback_data(inode)) { | |
| return ext4_writeback_write_end(file, mapping, pos, | |
| len, copied, page, fsdata); | |
| } else { | |
| BUG(); | |
| } | |
| } | |
| trace_ext4_da_write_end(inode, pos, len, copied); | |
| start = pos & (PAGE_CACHE_SIZE - 1); | |
| end = start + copied - 1; | |
| /* | |
| * generic_write_end() will run mark_inode_dirty() if i_size | |
| * changes. So let's piggyback the i_disksize mark_inode_dirty | |
| * into that. | |
| */ | |
| new_i_size = pos + copied; | |
| if (new_i_size > EXT4_I(inode)->i_disksize) { | |
| if (ext4_da_should_update_i_disksize(page, end)) { | |
| down_write(&EXT4_I(inode)->i_data_sem); | |
| if (new_i_size > EXT4_I(inode)->i_disksize) { | |
| /* | |
| * Updating i_disksize when extending file | |
| * without needing block allocation | |
| */ | |
| if (ext4_should_order_data(inode)) | |
| ret = ext4_jbd2_file_inode(handle, | |
| inode); | |
| EXT4_I(inode)->i_disksize = new_i_size; | |
| } | |
| up_write(&EXT4_I(inode)->i_data_sem); | |
| /* We need to mark inode dirty even if | |
| * new_i_size is less that inode->i_size | |
| * bu greater than i_disksize.(hint delalloc) | |
| */ | |
| ext4_mark_inode_dirty(handle, inode); | |
| } | |
| } | |
| ret2 = generic_write_end(file, mapping, pos, len, copied, | |
| page, fsdata); | |
| copied = ret2; | |
| if (ret2 < 0) | |
| ret = ret2; | |
| ret2 = ext4_journal_stop(handle); | |
| if (!ret) | |
| ret = ret2; | |
| return ret ? ret : copied; | |
| } | |
| static void ext4_da_invalidatepage(struct page *page, unsigned long offset) | |
| { | |
| /* | |
| * Drop reserved blocks | |
| */ | |
| BUG_ON(!PageLocked(page)); | |
| if (!page_has_buffers(page)) | |
| goto out; | |
| ext4_da_page_release_reservation(page, offset); | |
| out: | |
| ext4_invalidatepage(page, offset); | |
| return; | |
| } | |
| /* | |
| * Force all delayed allocation blocks to be allocated for a given inode. | |
| */ | |
| int ext4_alloc_da_blocks(struct inode *inode) | |
| { | |
| trace_ext4_alloc_da_blocks(inode); | |
| if (!EXT4_I(inode)->i_reserved_data_blocks && | |
| !EXT4_I(inode)->i_reserved_meta_blocks) | |
| return 0; | |
| /* | |
| * We do something simple for now. The filemap_flush() will | |
| * also start triggering a write of the data blocks, which is | |
| * not strictly speaking necessary (and for users of | |
| * laptop_mode, not even desirable). However, to do otherwise | |
| * would require replicating code paths in: | |
| * | |
| * ext4_da_writepages() -> | |
| * write_cache_pages() ---> (via passed in callback function) | |
| * __mpage_da_writepage() --> | |
| * mpage_add_bh_to_extent() | |
| * mpage_da_map_blocks() | |
| * | |
| * The problem is that write_cache_pages(), located in | |
| * mm/page-writeback.c, marks pages clean in preparation for | |
| * doing I/O, which is not desirable if we're not planning on | |
| * doing I/O at all. | |
| * | |
| * We could call write_cache_pages(), and then redirty all of | |
| * the pages by calling redirty_page_for_writeback() but that | |
| * would be ugly in the extreme. So instead we would need to | |
| * replicate parts of the code in the above functions, | |
| * simplifying them becuase we wouldn't actually intend to | |
| * write out the pages, but rather only collect contiguous | |
| * logical block extents, call the multi-block allocator, and | |
| * then update the buffer heads with the block allocations. | |
| * | |
| * For now, though, we'll cheat by calling filemap_flush(), | |
| * which will map the blocks, and start the I/O, but not | |
| * actually wait for the I/O to complete. | |
| */ | |
| return filemap_flush(inode->i_mapping); | |
| } | |
| /* | |
| * bmap() is special. It gets used by applications such as lilo and by | |
| * the swapper to find the on-disk block of a specific piece of data. | |
| * | |
| * Naturally, this is dangerous if the block concerned is still in the | |
| * journal. If somebody makes a swapfile on an ext4 data-journaling | |
| * filesystem and enables swap, then they may get a nasty shock when the | |
| * data getting swapped to that swapfile suddenly gets overwritten by | |
| * the original zero's written out previously to the journal and | |
| * awaiting writeback in the kernel's buffer cache. | |
| * | |
| * So, if we see any bmap calls here on a modified, data-journaled file, | |
| * take extra steps to flush any blocks which might be in the cache. | |
| */ | |
| static sector_t ext4_bmap(struct address_space *mapping, sector_t block) | |
| { | |
| struct inode *inode = mapping->host; | |
| journal_t *journal; | |
| int err; | |
| if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY) && | |
| test_opt(inode->i_sb, DELALLOC)) { | |
| /* | |
| * With delalloc we want to sync the file | |
| * so that we can make sure we allocate | |
| * blocks for file | |
| */ | |
| filemap_write_and_wait(mapping); | |
| } | |
| if (EXT4_JOURNAL(inode) && EXT4_I(inode)->i_state & EXT4_STATE_JDATA) { | |
| /* | |
| * This is a REALLY heavyweight approach, but the use of | |
| * bmap on dirty files is expected to be extremely rare: | |
| * only if we run lilo or swapon on a freshly made file | |
| * do we expect this to happen. | |
| * | |
| * (bmap requires CAP_SYS_RAWIO so this does not | |
| * represent an unprivileged user DOS attack --- we'd be | |
| * in trouble if mortal users could trigger this path at | |
| * will.) | |
| * | |
| * NB. EXT4_STATE_JDATA is not set on files other than | |
| * regular files. If somebody wants to bmap a directory | |
| * or symlink and gets confused because the buffer | |
| * hasn't yet been flushed to disk, they deserve | |
| * everything they get. | |
| */ | |
| EXT4_I(inode)->i_state &= ~EXT4_STATE_JDATA; | |
| journal = EXT4_JOURNAL(inode); | |
| jbd2_journal_lock_updates(journal); | |
| err = jbd2_journal_flush(journal); | |
| jbd2_journal_unlock_updates(journal); | |
| if (err) | |
| return 0; | |
| } | |
| return generic_block_bmap(mapping, block, ext4_get_block); | |
| } | |
| static int ext4_readpage(struct file *file, struct page *page) | |
| { | |
| return mpage_readpage(page, ext4_get_block); | |
| } | |
| static int | |
| ext4_readpages(struct file *file, struct address_space *mapping, | |
| struct list_head *pages, unsigned nr_pages) | |
| { | |
| return mpage_readpages(mapping, pages, nr_pages, ext4_get_block); | |
| } | |
| static void ext4_invalidatepage(struct page *page, unsigned long offset) | |
| { | |
| journal_t *journal = EXT4_JOURNAL(page->mapping->host); | |
| /* | |
| * If it's a full truncate we just forget about the pending dirtying | |
| */ | |
| if (offset == 0) | |
| ClearPageChecked(page); | |
| if (journal) | |
| jbd2_journal_invalidatepage(journal, page, offset); | |
| else | |
| block_invalidatepage(page, offset); | |
| } | |
| static int ext4_releasepage(struct page *page, gfp_t wait) | |
| { | |
| journal_t *journal = EXT4_JOURNAL(page->mapping->host); | |
| WARN_ON(PageChecked(page)); | |
| if (!page_has_buffers(page)) | |
| return 0; | |
| if (journal) | |
| return jbd2_journal_try_to_free_buffers(journal, page, wait); | |
| else | |
| return try_to_free_buffers(page); | |
| } | |
| /* | |
| * O_DIRECT for ext3 (or indirect map) based files | |
| * | |
| * If the O_DIRECT write will extend the file then add this inode to the | |
| * orphan list. So recovery will truncate it back to the original size | |
| * if the machine crashes during the write. | |
| * | |
| * If the O_DIRECT write is intantiating holes inside i_size and the machine | |
| * crashes then stale disk data _may_ be exposed inside the file. But current | |
| * VFS code falls back into buffered path in that case so we are safe. | |
| */ | |
| static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, | |
| const struct iovec *iov, loff_t offset, | |
| unsigned long nr_segs) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file->f_mapping->host; | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| handle_t *handle; | |
| ssize_t ret; | |
| int orphan = 0; | |
| size_t count = iov_length(iov, nr_segs); | |
| if (rw == WRITE) { | |
| loff_t final_size = offset + count; | |
| if (final_size > inode->i_size) { | |
| /* Credits for sb + inode write */ | |
| handle = ext4_journal_start(inode, 2); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| ret = ext4_orphan_add(handle, inode); | |
| if (ret) { | |
| ext4_journal_stop(handle); | |
| goto out; | |
| } | |
| orphan = 1; | |
| ei->i_disksize = inode->i_size; | |
| ext4_journal_stop(handle); | |
| } | |
| } | |
| ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, | |
| offset, nr_segs, | |
| ext4_get_block, NULL); | |
| if (orphan) { | |
| int err; | |
| /* Credits for sb + inode write */ | |
| handle = ext4_journal_start(inode, 2); | |
| if (IS_ERR(handle)) { | |
| /* This is really bad luck. We've written the data | |
| * but cannot extend i_size. Bail out and pretend | |
| * the write failed... */ | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| if (inode->i_nlink) | |
| ext4_orphan_del(handle, inode); | |
| if (ret > 0) { | |
| loff_t end = offset + ret; | |
| if (end > inode->i_size) { | |
| ei->i_disksize = end; | |
| i_size_write(inode, end); | |
| /* | |
| * We're going to return a positive `ret' | |
| * here due to non-zero-length I/O, so there's | |
| * no way of reporting error returns from | |
| * ext4_mark_inode_dirty() to userspace. So | |
| * ignore it. | |
| */ | |
| ext4_mark_inode_dirty(handle, inode); | |
| } | |
| } | |
| err = ext4_journal_stop(handle); | |
| if (ret == 0) | |
| ret = err; | |
| } | |
| out: | |
| return ret; | |
| } | |
| /* Maximum number of blocks we map for direct IO at once. */ | |
| static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock, | |
| struct buffer_head *bh_result, int create) | |
| { | |
| handle_t *handle = NULL; | |
| int ret = 0; | |
| unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | |
| int dio_credits; | |
| ext4_debug("ext4_get_block_dio_write: inode %lu, create flag %d\n", | |
| inode->i_ino, create); | |
| /* | |
| * DIO VFS code passes create = 0 flag for write to | |
| * the middle of file. It does this to avoid block | |
| * allocation for holes, to prevent expose stale data | |
| * out when there is parallel buffered read (which does | |
| * not hold the i_mutex lock) while direct IO write has | |
| * not completed. DIO request on holes finally falls back | |
| * to buffered IO for this reason. | |
| * | |
| * For ext4 extent based file, since we support fallocate, | |
| * new allocated extent as uninitialized, for holes, we | |
| * could fallocate blocks for holes, thus parallel | |
| * buffered IO read will zero out the page when read on | |
| * a hole while parallel DIO write to the hole has not completed. | |
| * | |
| * when we come here, we know it's a direct IO write to | |
| * to the middle of file (<i_size) | |
| * so it's safe to override the create flag from VFS. | |
| */ | |
| create = EXT4_GET_BLOCKS_DIO_CREATE_EXT; | |
| if (max_blocks > DIO_MAX_BLOCKS) | |
| max_blocks = DIO_MAX_BLOCKS; | |
| dio_credits = ext4_chunk_trans_blocks(inode, max_blocks); | |
| handle = ext4_journal_start(inode, dio_credits); | |
| if (IS_ERR(handle)) { | |
| ret = PTR_ERR(handle); | |
| goto out; | |
| } | |
| ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result, | |
| create); | |
| if (ret > 0) { | |
| bh_result->b_size = (ret << inode->i_blkbits); | |
| ret = 0; | |
| } | |
| ext4_journal_stop(handle); | |
| out: | |
| return ret; | |
| } | |
| static void ext4_free_io_end(ext4_io_end_t *io) | |
| { | |
| BUG_ON(!io); | |
| iput(io->inode); | |
| kfree(io); | |
| } | |
| static void dump_aio_dio_list(struct inode * inode) | |
| { | |
| #ifdef EXT4_DEBUG | |
| struct list_head *cur, *before, *after; | |
| ext4_io_end_t *io, *io0, *io1; | |
| if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){ | |
| ext4_debug("inode %lu aio dio list is empty\n", inode->i_ino); | |
| return; | |
| } | |
| ext4_debug("Dump inode %lu aio_dio_completed_IO list \n", inode->i_ino); | |
| list_for_each_entry(io, &EXT4_I(inode)->i_aio_dio_complete_list, list){ | |
| cur = &io->list; | |
| before = cur->prev; | |
| io0 = container_of(before, ext4_io_end_t, list); | |
| after = cur->next; | |
| io1 = container_of(after, ext4_io_end_t, list); | |
| ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n", | |
| io, inode->i_ino, io0, io1); | |
| } | |
| #endif | |
| } | |
| /* | |
| * check a range of space and convert unwritten extents to written. | |
| */ | |
| static int ext4_end_aio_dio_nolock(ext4_io_end_t *io) | |
| { | |
| struct inode *inode = io->inode; | |
| loff_t offset = io->offset; | |
| size_t size = io->size; | |
| int ret = 0; | |
| ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p," | |
| "list->prev 0x%p\n", | |
| io, inode->i_ino, io->list.next, io->list.prev); | |
| if (list_empty(&io->list)) | |
| return ret; | |
| if (io->flag != DIO_AIO_UNWRITTEN) | |
| return ret; | |
| if (offset + size <= i_size_read(inode)) | |
| ret = ext4_convert_unwritten_extents(inode, offset, size); | |
| if (ret < 0) { | |
| printk(KERN_EMERG "%s: failed to convert unwritten" | |
| "extents to written extents, error is %d" | |
| " io is still on inode %lu aio dio list\n", | |
| __func__, ret, inode->i_ino); | |
| return ret; | |
| } | |
| /* clear the DIO AIO unwritten flag */ | |
| io->flag = 0; | |
| return ret; | |
| } | |
| /* | |
| * work on completed aio dio IO, to convert unwritten extents to extents | |
| */ | |
| static void ext4_end_aio_dio_work(struct work_struct *work) | |
| { | |
| ext4_io_end_t *io = container_of(work, ext4_io_end_t, work); | |
| struct inode *inode = io->inode; | |
| int ret = 0; | |
| mutex_lock(&inode->i_mutex); | |
| ret = ext4_end_aio_dio_nolock(io); | |
| if (ret >= 0) { | |
| if (!list_empty(&io->list)) | |
| list_del_init(&io->list); | |
| ext4_free_io_end(io); | |
| } | |
| mutex_unlock(&inode->i_mutex); | |
| } | |
| /* | |
| * This function is called from ext4_sync_file(). | |
| * | |
| * When AIO DIO IO is completed, the work to convert unwritten | |
| * extents to written is queued on workqueue but may not get immediately | |
| * scheduled. When fsync is called, we need to ensure the | |
| * conversion is complete before fsync returns. | |
| * The inode keeps track of a list of completed AIO from DIO path | |
| * that might needs to do the conversion. This function walks through | |
| * the list and convert the related unwritten extents to written. | |
| */ | |
| int flush_aio_dio_completed_IO(struct inode *inode) | |
| { | |
| ext4_io_end_t *io; | |
| int ret = 0; | |
| int ret2 = 0; | |
| if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)) | |
| return ret; | |
| dump_aio_dio_list(inode); | |
| while (!list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){ | |
| io = list_entry(EXT4_I(inode)->i_aio_dio_complete_list.next, | |
| ext4_io_end_t, list); | |
| /* | |
| * Calling ext4_end_aio_dio_nolock() to convert completed | |
| * IO to written. | |
| * | |
| * When ext4_sync_file() is called, run_queue() may already | |
| * about to flush the work corresponding to this io structure. | |
| * It will be upset if it founds the io structure related | |
| * to the work-to-be schedule is freed. | |
| * | |
| * Thus we need to keep the io structure still valid here after | |
| * convertion finished. The io structure has a flag to | |
| * avoid double converting from both fsync and background work | |
| * queue work. | |
| */ | |
| ret = ext4_end_aio_dio_nolock(io); | |
| if (ret < 0) | |
| ret2 = ret; | |
| else | |
| list_del_init(&io->list); | |
| } | |
| return (ret2 < 0) ? ret2 : 0; | |
| } | |
| static ext4_io_end_t *ext4_init_io_end (struct inode *inode) | |
| { | |
| ext4_io_end_t *io = NULL; | |
| io = kmalloc(sizeof(*io), GFP_NOFS); | |
| if (io) { | |
| igrab(inode); | |
| io->inode = inode; | |
| io->flag = 0; | |
| io->offset = 0; | |
| io->size = 0; | |
| io->error = 0; | |
| INIT_WORK(&io->work, ext4_end_aio_dio_work); | |
| INIT_LIST_HEAD(&io->list); | |
| } | |
| return io; | |
| } | |
| static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, | |
| ssize_t size, void *private) | |
| { | |
| ext4_io_end_t *io_end = iocb->private; | |
| struct workqueue_struct *wq; | |
| ext_debug("ext4_end_io_dio(): io_end 0x%p" | |
| "for inode %lu, iocb 0x%p, offset %llu, size %llu\n", | |
| iocb->private, io_end->inode->i_ino, iocb, offset, | |
| size); | |
| /* if not async direct IO or dio with 0 bytes write, just return */ | |
| if (!io_end || !size) | |
| return; | |
| /* if not aio dio with unwritten extents, just free io and return */ | |
| if (io_end->flag != DIO_AIO_UNWRITTEN){ | |
| ext4_free_io_end(io_end); | |
| iocb->private = NULL; | |
| return; | |
| } | |
| io_end->offset = offset; | |
| io_end->size = size; | |
| wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq; | |
| /* queue the work to convert unwritten extents to written */ | |
| queue_work(wq, &io_end->work); | |
| /* Add the io_end to per-inode completed aio dio list*/ | |
| list_add_tail(&io_end->list, | |
| &EXT4_I(io_end->inode)->i_aio_dio_complete_list); | |
| iocb->private = NULL; | |
| } | |
| /* | |
| * For ext4 extent files, ext4 will do direct-io write to holes, | |
| * preallocated extents, and those write extend the file, no need to | |
| * fall back to buffered IO. | |
| * | |
| * For holes, we fallocate those blocks, mark them as unintialized | |
| * If those blocks were preallocated, we mark sure they are splited, but | |
| * still keep the range to write as unintialized. | |
| * | |
| * The unwrritten extents will be converted to written when DIO is completed. | |
| * For async direct IO, since the IO may still pending when return, we | |
| * set up an end_io call back function, which will do the convertion | |
| * when async direct IO completed. | |
| * | |
| * If the O_DIRECT write will extend the file then add this inode to the | |
| * orphan list. So recovery will truncate it back to the original size | |
| * if the machine crashes during the write. | |
| * | |
| */ | |
| static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, | |
| const struct iovec *iov, loff_t offset, | |
| unsigned long nr_segs) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file->f_mapping->host; | |
| ssize_t ret; | |
| size_t count = iov_length(iov, nr_segs); | |
| loff_t final_size = offset + count; | |
| if (rw == WRITE && final_size <= inode->i_size) { | |
| /* | |
| * We could direct write to holes and fallocate. | |
| * | |
| * Allocated blocks to fill the hole are marked as uninitialized | |
| * to prevent paralel buffered read to expose the stale data | |
| * before DIO complete the data IO. | |
| * | |
| * As to previously fallocated extents, ext4 get_block | |
| * will just simply mark the buffer mapped but still | |
| * keep the extents uninitialized. | |
| * | |
| * for non AIO case, we will convert those unwritten extents | |
| * to written after return back from blockdev_direct_IO. | |
| * | |
| * for async DIO, the conversion needs to be defered when | |
| * the IO is completed. The ext4 end_io callback function | |
| * will be called to take care of the conversion work. | |
| * Here for async case, we allocate an io_end structure to | |
| * hook to the iocb. | |
| */ | |
| iocb->private = NULL; | |
| EXT4_I(inode)->cur_aio_dio = NULL; | |
| if (!is_sync_kiocb(iocb)) { | |
| iocb->private = ext4_init_io_end(inode); | |
| if (!iocb->private) | |
| return -ENOMEM; | |
| /* | |
| * we save the io structure for current async | |
| * direct IO, so that later ext4_get_blocks() | |
| * could flag the io structure whether there | |
| * is a unwritten extents needs to be converted | |
| * when IO is completed. | |
| */ | |
| EXT4_I(inode)->cur_aio_dio = iocb->private; | |
| } | |
| ret = blockdev_direct_IO(rw, iocb, inode, | |
| inode->i_sb->s_bdev, iov, | |
| offset, nr_segs, | |
| ext4_get_block_dio_write, | |
| ext4_end_io_dio); | |
| if (iocb->private) | |
| EXT4_I(inode)->cur_aio_dio = NULL; | |
| /* | |
| * The io_end structure takes a reference to the inode, | |
| * that structure needs to be destroyed and the | |
| * reference to the inode need to be dropped, when IO is | |
| * complete, even with 0 byte write, or failed. | |
| * | |
| * In the successful AIO DIO case, the io_end structure will be | |
| * desctroyed and the reference to the inode will be dropped | |
| * after the end_io call back function is called. | |
| * | |
| * In the case there is 0 byte write, or error case, since | |
| * VFS direct IO won't invoke the end_io call back function, | |
| * we need to free the end_io structure here. | |
| */ | |
| if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { | |
| ext4_free_io_end(iocb->private); | |
| iocb->private = NULL; | |
| } else if (ret > 0) | |
| /* | |
| * for non AIO case, since the IO is already | |
| * completed, we could do the convertion right here | |
| */ | |
| ret = ext4_convert_unwritten_extents(inode, | |
| offset, ret); | |
| return ret; | |
| } | |
| /* for write the the end of file case, we fall back to old way */ | |
| return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); | |
| } | |
| static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, | |
| const struct iovec *iov, loff_t offset, | |
| unsigned long nr_segs) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file->f_mapping->host; | |
| if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) | |
| return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs); | |
| return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); | |
| } | |
| /* | |
| * Pages can be marked dirty completely asynchronously from ext4's journalling | |
| * activity. By filemap_sync_pte(), try_to_unmap_one(), etc. We cannot do | |
| * much here because ->set_page_dirty is called under VFS locks. The page is | |
| * not necessarily locked. | |
| * | |
| * We cannot just dirty the page and leave attached buffers clean, because the | |
| * buffers' dirty state is "definitive". We cannot just set the buffers dirty | |
| * or jbddirty because all the journalling code will explode. | |
| * | |
| * So what we do is to mark the page "pending dirty" and next time writepage | |
| * is called, propagate that into the buffers appropriately. | |
| */ | |
| static int ext4_journalled_set_page_dirty(struct page *page) | |
| { | |
| SetPageChecked(page); | |
| return __set_page_dirty_nobuffers(page); | |
| } | |
| static const struct address_space_operations ext4_ordered_aops = { | |
| .readpage = ext4_readpage, | |
| .readpages = ext4_readpages, | |
| .writepage = ext4_writepage, | |
| .sync_page = block_sync_page, | |
| .write_begin = ext4_write_begin, | |
| .write_end = ext4_ordered_write_end, | |
| .bmap = ext4_bmap, | |
| .invalidatepage = ext4_invalidatepage, | |
| .releasepage = ext4_releasepage, | |
| .direct_IO = ext4_direct_IO, | |
| .migratepage = buffer_migrate_page, | |
| .is_partially_uptodate = block_is_partially_uptodate, | |
| .error_remove_page = generic_error_remove_page, | |
| }; | |
| static const struct address_space_operations ext4_writeback_aops = { | |
| .readpage = ext4_readpage, | |
| .readpages = ext4_readpages, | |
| .writepage = ext4_writepage, | |
| .sync_page = block_sync_page, | |
| .write_begin = ext4_write_begin, | |
| .write_end = ext4_writeback_write_end, | |
| .bmap = ext4_bmap, | |
| .invalidatepage = ext4_invalidatepage, | |
| .releasepage = ext4_releasepage, | |
| .direct_IO = ext4_direct_IO, | |
| .migratepage = buffer_migrate_page, | |
| .is_partially_uptodate = block_is_partially_uptodate, | |
| .error_remove_page = generic_error_remove_page, | |
| }; | |
| static const struct address_space_operations ext4_journalled_aops = { | |
| .readpage = ext4_readpage, | |
| .readpages = ext4_readpages, | |
| .writepage = ext4_writepage, | |
| .sync_page = block_sync_page, | |
| .write_begin = ext4_write_begin, | |
| .write_end = ext4_journalled_write_end, | |
| .set_page_dirty = ext4_journalled_set_page_dirty, | |
| .bmap = ext4_bmap, | |
| .invalidatepage = ext4_invalidatepage, | |
| .releasepage = ext4_releasepage, | |
| .is_partially_uptodate = block_is_partially_uptodate, | |
| .error_remove_page = generic_error_remove_page, | |
| }; | |
| static const struct address_space_operations ext4_da_aops = { | |
| .readpage = ext4_readpage, | |
| .readpages = ext4_readpages, | |
| .writepage = ext4_writepage, | |
| .writepages = ext4_da_writepages, | |
| .sync_page = block_sync_page, | |
| .write_begin = ext4_da_write_begin, | |
| .write_end = ext4_da_write_end, | |
| .bmap = ext4_bmap, | |
| .invalidatepage = ext4_da_invalidatepage, | |
| .releasepage = ext4_releasepage, | |
| .direct_IO = ext4_direct_IO, | |
| .migratepage = buffer_migrate_page, | |
| .is_partially_uptodate = block_is_partially_uptodate, | |
| .error_remove_page = generic_error_remove_page, | |
| }; | |
| void ext4_set_aops(struct inode *inode) | |
| { | |
| if (ext4_should_order_data(inode) && | |
| test_opt(inode->i_sb, DELALLOC)) | |
| inode->i_mapping->a_ops = &ext4_da_aops; | |
| else if (ext4_should_order_data(inode)) | |
| inode->i_mapping->a_ops = &ext4_ordered_aops; | |
| else if (ext4_should_writeback_data(inode) && | |
| test_opt(inode->i_sb, DELALLOC)) | |
| inode->i_mapping->a_ops = &ext4_da_aops; | |
| else if (ext4_should_writeback_data(inode)) | |
| inode->i_mapping->a_ops = &ext4_writeback_aops; | |
| else | |
| inode->i_mapping->a_ops = &ext4_journalled_aops; | |
| } | |
| /* | |
| * ext4_block_truncate_page() zeroes out a mapping from file offset `from' | |
| * up to the end of the block which corresponds to `from'. | |
| * This required during truncate. We need to physically zero the tail end | |
| * of that block so it doesn't yield old data if the file is later grown. | |
| */ | |
| int ext4_block_truncate_page(handle_t *handle, | |
| struct address_space *mapping, loff_t from) | |
| { | |
| ext4_fsblk_t index = from >> PAGE_CACHE_SHIFT; | |
| unsigned offset = from & (PAGE_CACHE_SIZE-1); | |
| unsigned blocksize, length, pos; | |
| ext4_lblk_t iblock; | |
| struct inode *inode = mapping->host; | |
| struct buffer_head *bh; | |
| struct page *page; | |
| int err = 0; | |
| page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT, | |
| mapping_gfp_mask(mapping) & ~__GFP_FS); | |
| if (!page) | |
| return -EINVAL; | |
| blocksize = inode->i_sb->s_blocksize; | |
| length = blocksize - (offset & (blocksize - 1)); | |
| iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); | |
| /* | |
| * For "nobh" option, we can only work if we don't need to | |
| * read-in the page - otherwise we create buffers to do the IO. | |
| */ | |
| if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) && | |
| ext4_should_writeback_data(inode) && PageUptodate(page)) { | |
| zero_user(page, offset, length); | |
| set_page_dirty(page); | |
| goto unlock; | |
| } | |
| if (!page_has_buffers(page)) | |
| create_empty_buffers(page, blocksize, 0); | |
| /* Find the buffer that contains "offset" */ | |
| bh = page_buffers(page); | |
| pos = blocksize; | |
| while (offset >= pos) { | |
| bh = bh->b_this_page; | |
| iblock++; | |
| pos += blocksize; | |
| } | |
| err = 0; | |
| if (buffer_freed(bh)) { | |
| BUFFER_TRACE(bh, "freed: skip"); | |
| goto unlock; | |
| } | |
| if (!buffer_mapped(bh)) { | |
| BUFFER_TRACE(bh, "unmapped"); | |
| ext4_get_block(inode, iblock, bh, 0); | |
| /* unmapped? It's a hole - nothing to do */ | |
| if (!buffer_mapped(bh)) { | |
| BUFFER_TRACE(bh, "still unmapped"); | |
| goto unlock; | |
| } | |
| } | |
| /* Ok, it's mapped. Make sure it's up-to-date */ | |
| if (PageUptodate(page)) | |
| set_buffer_uptodate(bh); | |
| if (!buffer_uptodate(bh)) { | |
| err = -EIO; | |
| ll_rw_block(READ, 1, &bh); | |
| wait_on_buffer(bh); | |
| /* Uhhuh. Read error. Complain and punt. */ | |
| if (!buffer_uptodate(bh)) | |
| goto unlock; | |
| } | |
| if (ext4_should_journal_data(inode)) { | |
| BUFFER_TRACE(bh, "get write access"); | |
| err = ext4_journal_get_write_access(handle, bh); | |
| if (err) | |
| goto unlock; | |
| } | |
| zero_user(page, offset, length); | |
| BUFFER_TRACE(bh, "zeroed end of block"); | |
| err = 0; | |
| if (ext4_should_journal_data(inode)) { | |
| err = ext4_handle_dirty_metadata(handle, inode, bh); | |
| } else { | |
| if (ext4_should_order_data(inode)) | |
| err = ext4_jbd2_file_inode(handle, inode); | |
| mark_buffer_dirty(bh); | |
| } | |
| unlock: | |
| unlock_page(page); | |
| page_cache_release(page); | |
| return err; | |
| } | |
| /* | |
| * Probably it should be a library function... search for first non-zero word | |
| * or memcmp with zero_page, whatever is better for particular architecture. | |
| * Linus? | |
| */ | |
| static inline int all_zeroes(__le32 *p, __le32 *q) | |
| { | |
| while (p < q) | |
| if (*p++) | |
| return 0; | |
| return 1; | |
| } | |
| /** | |
| * ext4_find_shared - find the indirect blocks for partial truncation. | |
| * @inode: inode in question | |
| * @depth: depth of the affected branch | |
| * @offsets: offsets of pointers in that branch (see ext4_block_to_path) | |
| * @chain: place to store the pointers to partial indirect blocks | |
| * @top: place to the (detached) top of branch | |
| * | |
| * This is a helper function used by ext4_truncate(). | |
| * | |
| * When we do truncate() we may have to clean the ends of several | |
| * indirect blocks but leave the blocks themselves alive. Block is | |
| * partially truncated if some data below the new i_size is refered | |
| * from it (and it is on the path to the first completely truncated | |
| * data block, indeed). We have to free the top of that path along | |
| * with everything to the right of the path. Since no allocation | |
| * past the truncation point is possible until ext4_truncate() | |
| * finishes, we may safely do the latter, but top of branch may | |
| * require special attention - pageout below the truncation point | |
| * might try to populate it. | |
| * | |
| * We atomically detach the top of branch from the tree, store the | |
| * block number of its root in *@top, pointers to buffer_heads of | |
| * partially truncated blocks - in @chain[].bh and pointers to | |
| * their last elements that should not be removed - in | |
| * @chain[].p. Return value is the pointer to last filled element | |
| * of @chain. | |
| * | |
| * The work left to caller to do the actual freeing of subtrees: | |
| * a) free the subtree starting from *@top | |
| * b) free the subtrees whose roots are stored in | |
| * (@chain[i].p+1 .. end of @chain[i].bh->b_data) | |
| * c) free the subtrees growing from the inode past the @chain[0]. | |
| * (no partially truncated stuff there). */ | |
| static Indirect *ext4_find_shared(struct inode *inode, int depth, | |
| ext4_lblk_t offsets[4], Indirect chain[4], | |
| __le32 *top) | |
| { | |
| Indirect *partial, *p; | |
| int k, err; | |
| *top = 0; | |
| /* Make k index the deepest non-null offest + 1 */ | |
| for (k = depth; k > 1 && !offsets[k-1]; k--) | |
| ; | |
| partial = ext4_get_branch(inode, k, offsets, chain, &err); | |
| /* Writer: pointers */ | |
| if (!partial) | |
| partial = chain + k-1; | |
| /* | |
| * If the branch acquired continuation since we've looked at it - | |
| * fine, it should all survive and (new) top doesn't belong to us. | |
| */ | |
| if (!partial->key && *partial->p) | |
| /* Writer: end */ | |
| goto no_top; | |
| for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) | |
| ; | |
| /* | |
| * OK, we've found the last block that must survive. The rest of our | |
| * branch should be detached before unlocking. However, if that rest | |
| * of branch is all ours and does not grow immediately from the inode | |
| * it's easier to cheat and just decrement partial->p. | |
| */ | |
| if (p == chain + k - 1 && p > chain) { | |
| p->p--; | |
| } else { | |
| *top = *p->p; | |
| /* Nope, don't do this in ext4. Must leave the tree intact */ | |
| #if 0 | |
| *p->p = 0; | |
| #endif | |
| } | |
| /* Writer: end */ | |
| while (partial > p) { | |
| brelse(partial->bh); | |
| partial--; | |
| } | |
| no_top: | |
| return partial; | |
| } | |
| /* | |
| * Zero a number of block pointers in either an inode or an indirect block. | |
| * If we restart the transaction we must again get write access to the | |
| * indirect block for further modification. | |
| * | |
| * We release `count' blocks on disk, but (last - first) may be greater | |
| * than `count' because there can be holes in there. | |
| */ | |
| static void ext4_clear_blocks(handle_t *handle, struct inode *inode, | |
| struct buffer_head *bh, | |
| ext4_fsblk_t block_to_free, | |
| unsigned long count, __le32 *first, | |
| __le32 *last) | |
| { | |
| __le32 *p; | |
| if (try_to_extend_transaction(handle, inode)) { | |
| if (bh) { | |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | |
| ext4_handle_dirty_metadata(handle, inode, bh); | |
| } | |
| ext4_mark_inode_dirty(handle, inode); | |
| ext4_truncate_restart_trans(handle, inode, | |
| blocks_for_truncate(inode)); | |
| if (bh) { | |
| BUFFER_TRACE(bh, "retaking write access"); | |
| ext4_journal_get_write_access(handle, bh); | |
| } | |
| } | |
| /* | |
| * Any buffers which are on the journal will be in memory. We | |
| * find them on the hash table so jbd2_journal_revoke() will | |
| * run jbd2_journal_forget() on them. We've already detached | |
| * each block from the file, so bforget() in | |
| * jbd2_journal_forget() should be safe. | |
| * | |
| * AKPM: turn on bforget in jbd2_journal_forget()!!! | |
| */ | |
| for (p = first; p < last; p++) { | |
| u32 nr = le32_to_cpu(*p); | |
| if (nr) { | |
| struct buffer_head *tbh; | |
| *p = 0; | |
| tbh = sb_find_get_block(inode->i_sb, nr); | |
| ext4_forget(handle, 0, inode, tbh, nr); | |
| } | |
| } | |
| ext4_free_blocks(handle, inode, block_to_free, count, 0); | |
| } | |
| /** | |
| * ext4_free_data - free a list of data blocks | |
| * @handle: handle for this transaction | |
| * @inode: inode we are dealing with | |
| * @this_bh: indirect buffer_head which contains *@first and *@last | |
| * @first: array of block numbers | |
| * @last: points immediately past the end of array | |
| * | |
| * We are freeing all blocks refered from that array (numbers are stored as | |
| * little-endian 32-bit) and updating @inode->i_blocks appropriately. | |
| * | |
| * We accumulate contiguous runs of blocks to free. Conveniently, if these | |
| * blocks are contiguous then releasing them at one time will only affect one | |
| * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't | |
| * actually use a lot of journal space. | |
| * | |
| * @this_bh will be %NULL if @first and @last point into the inode's direct | |
| * block pointers. | |
| */ | |
| static void ext4_free_data(handle_t *handle, struct inode *inode, | |
| struct buffer_head *this_bh, | |
| __le32 *first, __le32 *last) | |
| { | |
| ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */ | |
| unsigned long count = 0; /* Number of blocks in the run */ | |
| __le32 *block_to_free_p = NULL; /* Pointer into inode/ind | |
| corresponding to | |
| block_to_free */ | |
| ext4_fsblk_t nr; /* Current block # */ | |
| __le32 *p; /* Pointer into inode/ind | |
| for current block */ | |
| int err; | |
| if (this_bh) { /* For indirect block */ | |
| BUFFER_TRACE(this_bh, "get_write_access"); | |
| err = ext4_journal_get_write_access(handle, this_bh); | |
| /* Important: if we can't update the indirect pointers | |
| * to the blocks, we can't free them. */ | |
| if (err) | |
| return; | |
| } | |
| for (p = first; p < last; p++) { | |
| nr = le32_to_cpu(*p); | |
| if (nr) { | |
| /* accumulate blocks to free if they're contiguous */ | |
| if (count == 0) { | |
| block_to_free = nr; | |
| block_to_free_p = p; | |
| count = 1; | |
| } else if (nr == block_to_free + count) { | |
| count++; | |
| } else { | |
| ext4_clear_blocks(handle, inode, this_bh, | |
| block_to_free, | |
| count, block_to_free_p, p); | |
| block_to_free = nr; | |
| block_to_free_p = p; | |
| count = 1; | |
| } | |
| } | |
| } | |
| if (count > 0) | |
| ext4_clear_blocks(handle, inode, this_bh, block_to_free, | |
| count, block_to_free_p, p); | |
| if (this_bh) { | |
| BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); | |
| /* | |
| * The buffer head should have an attached journal head at this | |
| * point. However, if the data is corrupted and an indirect | |
| * block pointed to itself, it would have been detached when | |
| * the block was cleared. Check for this instead of OOPSing. | |
| */ | |
| if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) | |
| ext4_handle_dirty_metadata(handle, inode, this_bh); | |
| else | |
| ext4_error(inode->i_sb, __func__, | |
| "circular indirect block detected, " | |
| "inode=%lu, block=%llu", | |
| inode->i_ino, | |
| (unsigned long long) this_bh->b_blocknr); | |
| } | |
| } | |
| /** | |
| * ext4_free_branches - free an array of branches | |
| * @handle: JBD handle for this transaction | |
| * @inode: inode we are dealing with | |
| * @parent_bh: the buffer_head which contains *@first and *@last | |
| * @first: array of block numbers | |
| * @last: pointer immediately past the end of array | |
| * @depth: depth of the branches to free | |
| * | |
| * We are freeing all blocks refered from these branches (numbers are | |
| * stored as little-endian 32-bit) and updating @inode->i_blocks | |
| * appropriately. | |
| */ | |
| static void ext4_free_branches(handle_t *handle, struct inode *inode, | |
| struct buffer_head *parent_bh, | |
| __le32 *first, __le32 *last, int depth) | |
| { | |
| ext4_fsblk_t nr; | |
| __le32 *p; | |
| if (ext4_handle_is_aborted(handle)) | |
| return; | |
| if (depth--) { | |
| struct buffer_head *bh; | |
| int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | |
| p = last; | |
| while (--p >= first) { | |
| nr = le32_to_cpu(*p); | |
| if (!nr) | |
| continue; /* A hole */ | |
| /* Go read the buffer for the next level down */ | |
| bh = sb_bread(inode->i_sb, nr); | |
| /* | |
| * A read failure? Report error and clear slot | |
| * (should be rare). | |
| */ | |
| if (!bh) { | |
| ext4_error(inode->i_sb, "ext4_free_branches", | |
| "Read failure, inode=%lu, block=%llu", | |
| inode->i_ino, nr); | |
| continue; | |
| } | |
| /* This zaps the entire block. Bottom up. */ | |
| BUFFER_TRACE(bh, "free child branches"); | |
| ext4_free_branches(handle, inode, bh, | |
| (__le32 *) bh->b_data, | |
| (__le32 *) bh->b_data + addr_per_block, | |
| depth); | |
| /* | |
| * We've probably journalled the indirect block several | |
| * times during the truncate. But it's no longer | |
| * needed and we now drop it from the transaction via | |
| * jbd2_journal_revoke(). | |
| * | |
| * That's easy if it's exclusively part of this | |
| * transaction. But if it's part of the committing | |
| * transaction then jbd2_journal_forget() will simply | |
| * brelse() it. That means that if the underlying | |
| * block is reallocated in ext4_get_block(), | |
| * unmap_underlying_metadata() will find this block | |
| * and will try to get rid of it. damn, damn. | |
| * | |
| * If this block has already been committed to the | |
| * journal, a revoke record will be written. And | |
| * revoke records must be emitted *before* clearing | |
| * this block's bit in the bitmaps. | |
| */ | |
| ext4_forget(handle, 1, inode, bh, bh->b_blocknr); | |
| /* | |
| * Everything below this this pointer has been | |
| * released. Now let this top-of-subtree go. | |
| * | |
| * We want the freeing of this indirect block to be | |
| * atomic in the journal with the updating of the | |
| * bitmap block which owns it. So make some room in | |
| * the journal. | |
| * | |
| * We zero the parent pointer *after* freeing its | |
| * pointee in the bitmaps, so if extend_transaction() | |
| * for some reason fails to put the bitmap changes and | |
| * the release into the same transaction, recovery | |
| * will merely complain about releasing a free block, | |
| * rather than leaking blocks. | |
| */ | |
| if (ext4_handle_is_aborted(handle)) | |
| return; | |
| if (try_to_extend_transaction(handle, inode)) { | |
| ext4_mark_inode_dirty(handle, inode); | |
| ext4_truncate_restart_trans(handle, inode, | |
| blocks_for_truncate(inode)); | |
| } | |
| ext4_free_blocks(handle, inode, nr, 1, 1); | |
| if (parent_bh) { | |
| /* | |
| * The block which we have just freed is | |
| * pointed to by an indirect block: journal it | |
| */ | |
| BUFFER_TRACE(parent_bh, "get_write_access"); | |
| if (!ext4_journal_get_write_access(handle, | |
| parent_bh)){ | |
| *p = 0; | |
| BUFFER_TRACE(parent_bh, | |
| "call ext4_handle_dirty_metadata"); | |
| ext4_handle_dirty_metadata(handle, | |
| inode, | |
| parent_bh); | |
| } | |
| } | |
| } | |
| } else { | |
| /* We have reached the bottom of the tree. */ | |
| BUFFER_TRACE(parent_bh, "free data blocks"); | |
| ext4_free_data(handle, inode, parent_bh, first, last); | |
| } | |
| } | |
| int ext4_can_truncate(struct inode *inode) | |
| { | |
| if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) | |
| return 0; | |
| if (S_ISREG(inode->i_mode)) | |
| return 1; | |
| if (S_ISDIR(inode->i_mode)) | |
| return 1; | |
| if (S_ISLNK(inode->i_mode)) | |
| return !ext4_inode_is_fast_symlink(inode); | |
| return 0; | |
| } | |
| /* | |
| * ext4_truncate() | |
| * | |
| * We block out ext4_get_block() block instantiations across the entire | |
| * transaction, and VFS/VM ensures that ext4_truncate() cannot run | |
| * simultaneously on behalf of the same inode. | |
| * | |
| * As we work through the truncate and commmit bits of it to the journal there | |
| * is one core, guiding principle: the file's tree must always be consistent on | |
| * disk. We must be able to restart the truncate after a crash. | |
| * | |
| * The file's tree may be transiently inconsistent in memory (although it | |
| * probably isn't), but whenever we close off and commit a journal transaction, | |
| * the contents of (the filesystem + the journal) must be consistent and | |
| * restartable. It's pretty simple, really: bottom up, right to left (although | |
| * left-to-right works OK too). | |
| * | |
| * Note that at recovery time, journal replay occurs *before* the restart of | |
| * truncate against the orphan inode list. | |
| * | |
| * The committed inode has the new, desired i_size (which is the same as | |
| * i_disksize in this case). After a crash, ext4_orphan_cleanup() will see | |
| * that this inode's truncate did not complete and it will again call | |
| * ext4_truncate() to have another go. So there will be instantiated blocks | |
| * to the right of the truncation point in a crashed ext4 filesystem. But | |
| * that's fine - as long as they are linked from the inode, the post-crash | |
| * ext4_truncate() run will find them and release them. | |
| */ | |
| void ext4_truncate(struct inode *inode) | |
| { | |
| handle_t *handle; | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| __le32 *i_data = ei->i_data; | |
| int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | |
| struct address_space *mapping = inode->i_mapping; | |
| ext4_lblk_t offsets[4]; | |
| Indirect chain[4]; | |
| Indirect *partial; | |
| __le32 nr = 0; | |
| int n; | |
| ext4_lblk_t last_block; | |
| unsigned blocksize = inode->i_sb->s_blocksize; | |
| if (!ext4_can_truncate(inode)) | |
| return; | |
| if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC)) | |
| ei->i_state |= EXT4_STATE_DA_ALLOC_CLOSE; | |
| if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | |
| ext4_ext_truncate(inode); | |
| return; | |
| } | |
| handle = start_transaction(inode); | |
| if (IS_ERR(handle)) | |
| return; /* AKPM: return what? */ | |
| last_block = (inode->i_size + blocksize-1) | |
| >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | |
| if (inode->i_size & (blocksize - 1)) | |
| if (ext4_block_truncate_page(handle, mapping, inode->i_size)) | |
| goto out_stop; | |
| n = ext4_block_to_path(inode, last_block, offsets, NULL); | |
| if (n == 0) | |
| goto out_stop; /* error */ | |
| /* | |
| * OK. This truncate is going to happen. We add the inode to the | |
| * orphan list, so that if this truncate spans multiple transactions, | |
| * and we crash, we will resume the truncate when the filesystem | |
| * recovers. It also marks the inode dirty, to catch the new size. | |
| * | |
| * Implication: the file must always be in a sane, consistent | |
| * truncatable state while each transaction commits. | |
| */ | |
| if (ext4_orphan_add(handle, inode)) | |
| goto out_stop; | |
| /* | |
| * From here we block out all ext4_get_block() callers who want to | |
| * modify the block allocation tree. | |
| */ | |
| down_write(&ei->i_data_sem); | |
| ext4_discard_preallocations(inode); | |
| /* | |
| * The orphan list entry will now protect us from any crash which | |
| * occurs before the truncate completes, so it is now safe to propagate | |
| * the new, shorter inode size (held for now in i_size) into the | |
| * on-disk inode. We do this via i_disksize, which is the value which | |
| * ext4 *really* writes onto the disk inode. | |
| */ | |
| ei->i_disksize = inode->i_size; | |
| if (n == 1) { /* direct blocks */ | |
| ext4_free_data(handle, inode, NULL, i_data+offsets[0], | |
| i_data + EXT4_NDIR_BLOCKS); | |
| goto do_indirects; | |
| } | |
| partial = ext4_find_shared(inode, n, offsets, chain, &nr); | |
| /* Kill the top of shared branch (not detached) */ | |
| if (nr) { | |
| if (partial == chain) { | |
| /* Shared branch grows from the inode */ | |
| ext4_free_branches(handle, inode, NULL, | |
| &nr, &nr+1, (chain+n-1) - partial); | |
| *partial->p = 0; | |
| /* | |
| * We mark the inode dirty prior to restart, | |
| * and prior to stop. No need for it here. | |
| */ | |
| } else { | |
| /* Shared branch grows from an indirect block */ | |
| BUFFER_TRACE(partial->bh, "get_write_access"); | |
| ext4_free_branches(handle, inode, partial->bh, | |
| partial->p, | |
| partial->p+1, (chain+n-1) - partial); | |
| } | |
| } | |
| /* Clear the ends of indirect blocks on the shared branch */ | |
| while (partial > chain) { | |
| ext4_free_branches(handle, inode, partial->bh, partial->p + 1, | |
| (__le32*)partial->bh->b_data+addr_per_block, | |
| (chain+n-1) - partial); | |
| BUFFER_TRACE(partial->bh, "call brelse"); | |
| brelse(partial->bh); | |
| partial--; | |
| } | |
| do_indirects: | |
| /* Kill the remaining (whole) subtrees */ | |
| switch (offsets[0]) { | |
| default: | |
| nr = i_data[EXT4_IND_BLOCK]; | |
| if (nr) { | |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); | |
| i_data[EXT4_IND_BLOCK] = 0; | |
| } | |
| case EXT4_IND_BLOCK: | |
| nr = i_data[EXT4_DIND_BLOCK]; | |
| if (nr) { | |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); | |
| i_data[EXT4_DIND_BLOCK] = 0; | |
| } | |
| case EXT4_DIND_BLOCK: | |
| nr = i_data[EXT4_TIND_BLOCK]; | |
| if (nr) { | |
| ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); | |
| i_data[EXT4_TIND_BLOCK] = 0; | |
| } | |
| case EXT4_TIND_BLOCK: | |
| ; | |
| } | |
| up_write(&ei->i_data_sem); | |
| inode->i_mtime = inode->i_ctime = ext4_current_time(inode); | |
| ext4_mark_inode_dirty(handle, inode); | |
| /* | |
| * In a multi-transaction truncate, we only make the final transaction | |
| * synchronous | |
| */ | |
| if (IS_SYNC(inode)) | |
| ext4_handle_sync(handle); | |
| out_stop: | |
| /* | |
| * If this was a simple ftruncate(), and the file will remain alive | |
| * then we need to clear up the orphan record which we created above. | |
| * However, if this was a real unlink then we were called by | |
| * ext4_delete_inode(), and we allow that function to clean up the | |
| * orphan info for us. | |
| */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(handle, inode); | |
| ext4_journal_stop(handle); | |
| } | |
| /* | |
| * ext4_get_inode_loc returns with an extra refcount against the inode's | |
| * underlying buffer_head on success. If 'in_mem' is true, we have all | |
| * data in memory that is needed to recreate the on-disk version of this | |
| * inode. | |
| */ | |
| static int __ext4_get_inode_loc(struct inode *inode, | |
| struct ext4_iloc *iloc, int in_mem) | |
| { | |
| struct ext4_group_desc *gdp; | |
| struct buffer_head *bh; | |
| struct super_block *sb = inode->i_sb; | |
| ext4_fsblk_t block; | |
| int inodes_per_block, inode_offset; | |
| iloc->bh = NULL; | |
| if (!ext4_valid_inum(sb, inode->i_ino)) | |
| return -EIO; | |
| iloc->block_group = (inode->i_ino - 1) / EXT4_INODES_PER_GROUP(sb); | |
| gdp = ext4_get_group_desc(sb, iloc->block_group, NULL); | |
| if (!gdp) | |
| return -EIO; | |
| /* | |
| * Figure out the offset within the block group inode table | |
| */ | |
| inodes_per_block = (EXT4_BLOCK_SIZE(sb) / EXT4_INODE_SIZE(sb)); | |
| inode_offset = ((inode->i_ino - 1) % | |
| EXT4_INODES_PER_GROUP(sb)); | |
| block = ext4_inode_table(sb, gdp) + (inode_offset / inodes_per_block); | |
| iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb); | |
| bh = sb_getblk(sb, block); | |
| if (!bh) { | |
| ext4_error(sb, "ext4_get_inode_loc", "unable to read " | |
| "inode block - inode=%lu, block=%llu", | |
| inode->i_ino, block); | |
| return -EIO; | |
| } | |
| if (!buffer_uptodate(bh)) { | |
| lock_buffer(bh); | |
| /* | |
| * If the buffer has the write error flag, we have failed | |
| * to write out another inode in the same block. In this | |
| * case, we don't have to read the block because we may | |
| * read the old inode data successfully. | |
| */ | |
| if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) | |
| set_buffer_uptodate(bh); | |
| if (buffer_uptodate(bh)) { | |
| /* someone brought it uptodate while we waited */ | |
| unlock_buffer(bh); | |
| goto has_buffer; | |
| } | |
| /* | |
| * If we have all information of the inode in memory and this | |
| * is the only valid inode in the block, we need not read the | |
| * block. | |
| */ | |
| if (in_mem) { | |
| struct buffer_head *bitmap_bh; | |
| int i, start; | |
| start = inode_offset & ~(inodes_per_block - 1); | |
| /* Is the inode bitmap in cache? */ | |
| bitmap_bh = sb_getblk(sb, ext4_inode_bitmap(sb, gdp)); | |
| if (!bitmap_bh) | |
| goto make_io; | |
| /* | |
| * If the inode bitmap isn't in cache then the | |
| * optimisation may end up performing two reads instead | |
| * of one, so skip it. | |
| */ | |
| if (!buffer_uptodate(bitmap_bh)) { | |
| brelse(bitmap_bh); | |
| goto make_io; | |
| } | |
| for (i = start; i < start + inodes_per_block; i++) { | |
| if (i == inode_offset) | |
| continue; | |
| if (ext4_test_bit(i, bitmap_bh->b_data)) | |
| break; | |
| } | |
| brelse(bitmap_bh); | |
| if (i == start + inodes_per_block) { | |
| /* all other inodes are free, so skip I/O */ | |
| memset(bh->b_data, 0, bh->b_size); | |
| set_buffer_uptodate(bh); | |
| unlock_buffer(bh); | |
| goto has_buffer; | |
| } | |
| } | |
| make_io: | |
| /* | |
| * If we need to do any I/O, try to pre-readahead extra | |
| * blocks from the inode table. | |
| */ | |
| if (EXT4_SB(sb)->s_inode_readahead_blks) { | |
| ext4_fsblk_t b, end, table; | |
| unsigned num; | |
| table = ext4_inode_table(sb, gdp); | |
| /* s_inode_readahead_blks is always a power of 2 */ | |
| b = block & ~(EXT4_SB(sb)->s_inode_readahead_blks-1); | |
| if (table > b) | |
| b = table; | |
| end = b + EXT4_SB(sb)->s_inode_readahead_blks; | |
| num = EXT4_INODES_PER_GROUP(sb); | |
| if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | |
| EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) | |
| num -= ext4_itable_unused_count(sb, gdp); | |
| table += num / inodes_per_block; | |
| if (end > table) | |
| end = table; | |
| while (b <= end) | |
| sb_breadahead(sb, b++); | |
| } | |
| /* | |
| * There are other valid inodes in the buffer, this inode | |
| * has in-inode xattrs, or we don't have this inode in memory. | |
| * Read the block from disk. | |
| */ | |
| get_bh(bh); | |
| bh->b_end_io = end_buffer_read_sync; | |
| submit_bh(READ_META, bh); | |
| wait_on_buffer(bh); | |
| if (!buffer_uptodate(bh)) { | |
| ext4_error(sb, __func__, | |
| "unable to read inode block - inode=%lu, " | |
| "block=%llu", inode->i_ino, block); | |
| brelse(bh); | |
| return -EIO; | |
| } | |
| } | |
| has_buffer: | |
| iloc->bh = bh; | |
| return 0; | |
| } | |
| int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc) | |
| { | |
| /* We have all inode data except xattrs in memory here. */ | |
| return __ext4_get_inode_loc(inode, iloc, | |
| !(EXT4_I(inode)->i_state & EXT4_STATE_XATTR)); | |
| } | |
| void ext4_set_inode_flags(struct inode *inode) | |
| { | |
| unsigned int flags = EXT4_I(inode)->i_flags; | |
| inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC); | |
| if (flags & EXT4_SYNC_FL) | |
| inode->i_flags |= S_SYNC; | |
| if (flags & EXT4_APPEND_FL) | |
| inode->i_flags |= S_APPEND; | |
| if (flags & EXT4_IMMUTABLE_FL) | |
| inode->i_flags |= S_IMMUTABLE; | |
| if (flags & EXT4_NOATIME_FL) | |
| inode->i_flags |= S_NOATIME; | |
| if (flags & EXT4_DIRSYNC_FL) | |
| inode->i_flags |= S_DIRSYNC; | |
| } | |
| /* Propagate flags from i_flags to EXT4_I(inode)->i_flags */ | |
| void ext4_get_inode_flags(struct ext4_inode_info *ei) | |
| { | |
| unsigned int flags = ei->vfs_inode.i_flags; | |
| ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL| | |
| EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL); | |
| if (flags & S_SYNC) | |
| ei->i_flags |= EXT4_SYNC_FL; | |
| if (flags & S_APPEND) | |
| ei->i_flags |= EXT4_APPEND_FL; | |
| if (flags & S_IMMUTABLE) | |
| ei->i_flags |= EXT4_IMMUTABLE_FL; | |
| if (flags & S_NOATIME) | |
| ei->i_flags |= EXT4_NOATIME_FL; | |
| if (flags & S_DIRSYNC) | |
| ei->i_flags |= EXT4_DIRSYNC_FL; | |
| } | |
| static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode, | |
| struct ext4_inode_info *ei) | |
| { | |
| blkcnt_t i_blocks ; | |
| struct inode *inode = &(ei->vfs_inode); | |
| struct super_block *sb = inode->i_sb; | |
| if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | |
| EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) { | |
| /* we are using combined 48 bit field */ | |
| i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 | | |
| le32_to_cpu(raw_inode->i_blocks_lo); | |
| if (ei->i_flags & EXT4_HUGE_FILE_FL) { | |
| /* i_blocks represent file system block size */ | |
| return i_blocks << (inode->i_blkbits - 9); | |
| } else { | |
| return i_blocks; | |
| } | |
| } else { | |
| return le32_to_cpu(raw_inode->i_blocks_lo); | |
| } | |
| } | |
| struct inode *ext4_iget(struct super_block *sb, unsigned long ino) | |
| { | |
| struct ext4_iloc iloc; | |
| struct ext4_inode *raw_inode; | |
| struct ext4_inode_info *ei; | |
| struct buffer_head *bh; | |
| struct inode *inode; | |
| long ret; | |
| int block; | |
| inode = iget_locked(sb, ino); | |
| if (!inode) | |
| return ERR_PTR(-ENOMEM); | |
| if (!(inode->i_state & I_NEW)) | |
| return inode; | |
| ei = EXT4_I(inode); | |
| ret = __ext4_get_inode_loc(inode, &iloc, 0); | |
| if (ret < 0) | |
| goto bad_inode; | |
| bh = iloc.bh; | |
| raw_inode = ext4_raw_inode(&iloc); | |
| inode->i_mode = le16_to_cpu(raw_inode->i_mode); | |
| inode->i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); | |
| inode->i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); | |
| if (!(test_opt(inode->i_sb, NO_UID32))) { | |
| inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; | |
| inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; | |
| } | |
| inode->i_nlink = le16_to_cpu(raw_inode->i_links_count); | |
| ei->i_state = 0; | |
| ei->i_dir_start_lookup = 0; | |
| ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); | |
| /* We now have enough fields to check if the inode was active or not. | |
| * This is needed because nfsd might try to access dead inodes | |
| * the test is that same one that e2fsck uses | |
| * NeilBrown 1999oct15 | |
| */ | |
| if (inode->i_nlink == 0) { | |
| if (inode->i_mode == 0 || | |
| !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) { | |
| /* this inode is deleted */ | |
| brelse(bh); | |
| ret = -ESTALE; | |
| goto bad_inode; | |
| } | |
| /* The only unlinked inodes we let through here have | |
| * valid i_mode and are being read by the orphan | |
| * recovery code: that's fine, we're about to complete | |
| * the process of deleting those. */ | |
| } | |
| ei->i_flags = le32_to_cpu(raw_inode->i_flags); | |
| inode->i_blocks = ext4_inode_blocks(raw_inode, ei); | |
| ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); | |
| if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) | |
| ei->i_file_acl |= | |
| ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; | |
| inode->i_size = ext4_isize(raw_inode); | |
| ei->i_disksize = inode->i_size; | |
| inode->i_generation = le32_to_cpu(raw_inode->i_generation); | |
| ei->i_block_group = iloc.block_group; | |
| ei->i_last_alloc_group = ~0; | |
| /* | |
| * NOTE! The in-memory inode i_data array is in little-endian order | |
| * even on big-endian machines: we do NOT byteswap the block numbers! | |
| */ | |
| for (block = 0; block < EXT4_N_BLOCKS; block++) | |
| ei->i_data[block] = raw_inode->i_block[block]; | |
| INIT_LIST_HEAD(&ei->i_orphan); | |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | |
| ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); | |
| if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > | |
| EXT4_INODE_SIZE(inode->i_sb)) { | |
| brelse(bh); | |
| ret = -EIO; | |
| goto bad_inode; | |
| } | |
| if (ei->i_extra_isize == 0) { | |
| /* The extra space is currently unused. Use it. */ | |
| ei->i_extra_isize = sizeof(struct ext4_inode) - | |
| EXT4_GOOD_OLD_INODE_SIZE; | |
| } else { | |
| __le32 *magic = (void *)raw_inode + | |
| EXT4_GOOD_OLD_INODE_SIZE + | |
| ei->i_extra_isize; | |
| if (*magic == cpu_to_le32(EXT4_XATTR_MAGIC)) | |
| ei->i_state |= EXT4_STATE_XATTR; | |
| } | |
| } else | |
| ei->i_extra_isize = 0; | |
| EXT4_INODE_GET_XTIME(i_ctime, inode, raw_inode); | |
| EXT4_INODE_GET_XTIME(i_mtime, inode, raw_inode); | |
| EXT4_INODE_GET_XTIME(i_atime, inode, raw_inode); | |
| EXT4_EINODE_GET_XTIME(i_crtime, ei, raw_inode); | |
| inode->i_version = le32_to_cpu(raw_inode->i_disk_version); | |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | |
| if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | |
| inode->i_version |= | |
| (__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; | |
| } | |
| ret = 0; | |
| if (ei->i_file_acl && | |
| ((ei->i_file_acl < | |
| (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) + | |
| EXT4_SB(sb)->s_gdb_count)) || | |
| (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) { | |
| ext4_error(sb, __func__, | |
| "bad extended attribute block %llu in inode #%lu", | |
| ei->i_file_acl, inode->i_ino); | |
| ret = -EIO; | |
| goto bad_inode; | |
| } else if (ei->i_flags & EXT4_EXTENTS_FL) { | |
| if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || | |
| (S_ISLNK(inode->i_mode) && | |
| !ext4_inode_is_fast_symlink(inode))) | |
| /* Validate extent which is part of inode */ | |
| ret = ext4_ext_check_inode(inode); | |
| } else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || | |
| (S_ISLNK(inode->i_mode) && | |
| !ext4_inode_is_fast_symlink(inode))) { | |
| /* Validate block references which are part of inode */ | |
| ret = ext4_check_inode_blockref(inode); | |
| } | |
| if (ret) { | |
| brelse(bh); | |
| goto bad_inode; | |
| } | |
| if (S_ISREG(inode->i_mode)) { | |
| inode->i_op = &ext4_file_inode_operations; | |
| inode->i_fop = &ext4_file_operations; | |
| ext4_set_aops(inode); | |
| } else if (S_ISDIR(inode->i_mode)) { | |
| inode->i_op = &ext4_dir_inode_operations; | |
| inode->i_fop = &ext4_dir_operations; | |
| } else if (S_ISLNK(inode->i_mode)) { | |
| if (ext4_inode_is_fast_symlink(inode)) { | |
| inode->i_op = &ext4_fast_symlink_inode_operations; | |
| nd_terminate_link(ei->i_data, inode->i_size, | |
| sizeof(ei->i_data) - 1); | |
| } else { | |
| inode->i_op = &ext4_symlink_inode_operations; | |
| ext4_set_aops(inode); | |
| } | |
| } else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) || | |
| S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) { | |
| inode->i_op = &ext4_special_inode_operations; | |
| if (raw_inode->i_block[0]) | |
| init_special_inode(inode, inode->i_mode, | |
| old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); | |
| else | |
| init_special_inode(inode, inode->i_mode, | |
| new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); | |
| } else { | |
| brelse(bh); | |
| ret = -EIO; | |
| ext4_error(inode->i_sb, __func__, | |
| "bogus i_mode (%o) for inode=%lu", | |
| inode->i_mode, inode->i_ino); | |
| goto bad_inode; | |
| } | |
| brelse(iloc.bh); | |
| ext4_set_inode_flags(inode); | |
| unlock_new_inode(inode); | |
| return inode; | |
| bad_inode: | |
| iget_failed(inode); | |
| return ERR_PTR(ret); | |
| } | |
| static int ext4_inode_blocks_set(handle_t *handle, | |
| struct ext4_inode *raw_inode, | |
| struct ext4_inode_info *ei) | |
| { | |
| struct inode *inode = &(ei->vfs_inode); | |
| u64 i_blocks = inode->i_blocks; | |
| struct super_block *sb = inode->i_sb; | |
| if (i_blocks <= ~0U) { | |
| /* | |
| * i_blocks can be represnted in a 32 bit variable | |
| * as multiple of 512 bytes | |
| */ | |
| raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); | |
| raw_inode->i_blocks_high = 0; | |
| ei->i_flags &= ~EXT4_HUGE_FILE_FL; | |
| return 0; | |
| } | |
| if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) | |
| return -EFBIG; | |
| if (i_blocks <= 0xffffffffffffULL) { | |
| /* | |
| * i_blocks can be represented in a 48 bit variable | |
| * as multiple of 512 bytes | |
| */ | |
| raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); | |
| raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | |
| ei->i_flags &= ~EXT4_HUGE_FILE_FL; | |
| } else { | |
| ei->i_flags |= EXT4_HUGE_FILE_FL; | |
| /* i_block is stored in file system block size */ | |
| i_blocks = i_blocks >> (inode->i_blkbits - 9); | |
| raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); | |
| raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Post the struct inode info into an on-disk inode location in the | |
| * buffer-cache. This gobbles the caller's reference to the | |
| * buffer_head in the inode location struct. | |
| * | |
| * The caller must have write access to iloc->bh. | |
| */ | |
| static int ext4_do_update_inode(handle_t *handle, | |
| struct inode *inode, | |
| struct ext4_iloc *iloc) | |
| { | |
| struct ext4_inode *raw_inode = ext4_raw_inode(iloc); | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| struct buffer_head *bh = iloc->bh; | |
| int err = 0, rc, block; | |
| /* For fields not not tracking in the in-memory inode, | |
| * initialise them to zero for new inodes. */ | |
| if (ei->i_state & EXT4_STATE_NEW) | |
| memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size); | |
| ext4_get_inode_flags(ei); | |
| raw_inode->i_mode = cpu_to_le16(inode->i_mode); | |
| if (!(test_opt(inode->i_sb, NO_UID32))) { | |
| raw_inode->i_uid_low = cpu_to_le16(low_16_bits(inode->i_uid)); | |
| raw_inode->i_gid_low = cpu_to_le16(low_16_bits(inode->i_gid)); | |
| /* | |
| * Fix up interoperability with old kernels. Otherwise, old inodes get | |
| * re-used with the upper 16 bits of the uid/gid intact | |
| */ | |
| if (!ei->i_dtime) { | |
| raw_inode->i_uid_high = | |
| cpu_to_le16(high_16_bits(inode->i_uid)); | |
| raw_inode->i_gid_high = | |
| cpu_to_le16(high_16_bits(inode->i_gid)); | |
| } else { | |
| raw_inode->i_uid_high = 0; | |
| raw_inode->i_gid_high = 0; | |
| } | |
| } else { | |
| raw_inode->i_uid_low = | |
| cpu_to_le16(fs_high2lowuid(inode->i_uid)); | |
| raw_inode->i_gid_low = | |
| cpu_to_le16(fs_high2lowgid(inode->i_gid)); | |
| raw_inode->i_uid_high = 0; | |
| raw_inode->i_gid_high = 0; | |
| } | |
| raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); | |
| EXT4_INODE_SET_XTIME(i_ctime, inode, raw_inode); | |
| EXT4_INODE_SET_XTIME(i_mtime, inode, raw_inode); | |
| EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode); | |
| EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode); | |
| if (ext4_inode_blocks_set(handle, raw_inode, ei)) | |
| goto out_brelse; | |
| raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); | |
| raw_inode->i_flags = cpu_to_le32(ei->i_flags); | |
| if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != | |
| cpu_to_le32(EXT4_OS_HURD)) | |
| raw_inode->i_file_acl_high = | |
| cpu_to_le16(ei->i_file_acl >> 32); | |
| raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl); | |
| ext4_isize_set(raw_inode, ei->i_disksize); | |
| if (ei->i_disksize > 0x7fffffffULL) { | |
| struct super_block *sb = inode->i_sb; | |
| if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, | |
| EXT4_FEATURE_RO_COMPAT_LARGE_FILE) || | |
| EXT4_SB(sb)->s_es->s_rev_level == | |
| cpu_to_le32(EXT4_GOOD_OLD_REV)) { | |
| /* If this is the first large file | |
| * created, add a flag to the superblock. | |
| */ | |
| err = ext4_journal_get_write_access(handle, | |
| EXT4_SB(sb)->s_sbh); | |
| if (err) | |
| goto out_brelse; | |
| ext4_update_dynamic_rev(sb); | |
| EXT4_SET_RO_COMPAT_FEATURE(sb, | |
| EXT4_FEATURE_RO_COMPAT_LARGE_FILE); | |
| sb->s_dirt = 1; | |
| ext4_handle_sync(handle); | |
| err = ext4_handle_dirty_metadata(handle, inode, | |
| EXT4_SB(sb)->s_sbh); | |
| } | |
| } | |
| raw_inode->i_generation = cpu_to_le32(inode->i_generation); | |
| if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { | |
| if (old_valid_dev(inode->i_rdev)) { | |
| raw_inode->i_block[0] = | |
| cpu_to_le32(old_encode_dev(inode->i_rdev)); | |
| raw_inode->i_block[1] = 0; | |
| } else { | |
| raw_inode->i_block[0] = 0; | |
| raw_inode->i_block[1] = | |
| cpu_to_le32(new_encode_dev(inode->i_rdev)); | |
| raw_inode->i_block[2] = 0; | |
| } | |
| } else | |
| for (block = 0; block < EXT4_N_BLOCKS; block++) | |
| raw_inode->i_block[block] = ei->i_data[block]; | |
| raw_inode->i_disk_version = cpu_to_le32(inode->i_version); | |
| if (ei->i_extra_isize) { | |
| if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | |
| raw_inode->i_version_hi = | |
| cpu_to_le32(inode->i_version >> 32); | |
| raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); | |
| } | |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | |
| rc = ext4_handle_dirty_metadata(handle, inode, bh); | |
| if (!err) | |
| err = rc; | |
| ei->i_state &= ~EXT4_STATE_NEW; | |
| out_brelse: | |
| brelse(bh); | |
| ext4_std_error(inode->i_sb, err); | |
| return err; | |
| } | |
| /* | |
| * ext4_write_inode() | |
| * | |
| * We are called from a few places: | |
| * | |
| * - Within generic_file_write() for O_SYNC files. | |
| * Here, there will be no transaction running. We wait for any running | |
| * trasnaction to commit. | |
| * | |
| * - Within sys_sync(), kupdate and such. | |
| * We wait on commit, if tol to. | |
| * | |
| * - Within prune_icache() (PF_MEMALLOC == true) | |
| * Here we simply return. We can't afford to block kswapd on the | |
| * journal commit. | |
| * | |
| * In all cases it is actually safe for us to return without doing anything, | |
| * because the inode has been copied into a raw inode buffer in | |
| * ext4_mark_inode_dirty(). This is a correctness thing for O_SYNC and for | |
| * knfsd. | |
| * | |
| * Note that we are absolutely dependent upon all inode dirtiers doing the | |
| * right thing: they *must* call mark_inode_dirty() after dirtying info in | |
| * which we are interested. | |
| * | |
| * It would be a bug for them to not do this. The code: | |
| * | |
| * mark_inode_dirty(inode) | |
| * stuff(); | |
| * inode->i_size = expr; | |
| * | |
| * is in error because a kswapd-driven write_inode() could occur while | |
| * `stuff()' is running, and the new i_size will be lost. Plus the inode | |
| * will no longer be on the superblock's dirty inode list. | |
| */ | |
| int ext4_write_inode(struct inode *inode, int wait) | |
| { | |
| int err; | |
| if (current->flags & PF_MEMALLOC) | |
| return 0; | |
| if (EXT4_SB(inode->i_sb)->s_journal) { | |
| if (ext4_journal_current_handle()) { | |
| jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n"); | |
| dump_stack(); | |
| return -EIO; | |
| } | |
| if (!wait) | |
| return 0; | |
| err = ext4_force_commit(inode->i_sb); | |
| } else { | |
| struct ext4_iloc iloc; | |
| err = ext4_get_inode_loc(inode, &iloc); | |
| if (err) | |
| return err; | |
| if (wait) | |
| sync_dirty_buffer(iloc.bh); | |
| if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) { | |
| ext4_error(inode->i_sb, __func__, | |
| "IO error syncing inode, " | |
| "inode=%lu, block=%llu", | |
| inode->i_ino, | |
| (unsigned long long)iloc.bh->b_blocknr); | |
| err = -EIO; | |
| } | |
| } | |
| return err; | |
| } | |
| /* | |
| * ext4_setattr() | |
| * | |
| * Called from notify_change. | |
| * | |
| * We want to trap VFS attempts to truncate the file as soon as | |
| * possible. In particular, we want to make sure that when the VFS | |
| * shrinks i_size, we put the inode on the orphan list and modify | |
| * i_disksize immediately, so that during the subsequent flushing of | |
| * dirty pages and freeing of disk blocks, we can guarantee that any | |
| * commit will leave the blocks being flushed in an unused state on | |
| * disk. (On recovery, the inode will get truncated and the blocks will | |
| * be freed, so we have a strong guarantee that no future commit will | |
| * leave these blocks visible to the user.) | |
| * | |
| * Another thing we have to assure is that if we are in ordered mode | |
| * and inode is still attached to the committing transaction, we must | |
| * we start writeout of all the dirty pages which are being truncated. | |
| * This way we are sure that all the data written in the previous | |
| * transaction are already on disk (truncate waits for pages under | |
| * writeback). | |
| * | |
| * Called with inode->i_mutex down. | |
| */ | |
| int ext4_setattr(struct dentry *dentry, struct iattr *attr) | |
| { | |
| struct inode *inode = dentry->d_inode; | |
| int error, rc = 0; | |
| const unsigned int ia_valid = attr->ia_valid; | |
| error = inode_change_ok(inode, attr); | |
| if (error) | |
| return error; | |
| if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || | |
| (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { | |
| handle_t *handle; | |
| /* (user+group)*(old+new) structure, inode write (sb, | |
| * inode block, ? - but truncate inode update has it) */ | |
| handle = ext4_journal_start(inode, 2*(EXT4_QUOTA_INIT_BLOCKS(inode->i_sb)+ | |
| EXT4_QUOTA_DEL_BLOCKS(inode->i_sb))+3); | |
| if (IS_ERR(handle)) { | |
| error = PTR_ERR(handle); | |
| goto err_out; | |
| } | |
| error = vfs_dq_transfer(inode, attr) ? -EDQUOT : 0; | |
| if (error) { | |
| ext4_journal_stop(handle); | |
| return error; | |
| } | |
| /* Update corresponding info in inode so that everything is in | |
| * one transaction */ | |
| if (attr->ia_valid & ATTR_UID) | |
| inode->i_uid = attr->ia_uid; | |
| if (attr->ia_valid & ATTR_GID) | |
| inode->i_gid = attr->ia_gid; | |
| error = ext4_mark_inode_dirty(handle, inode); | |
| ext4_journal_stop(handle); | |
| } | |
| if (attr->ia_valid & ATTR_SIZE) { | |
| if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) { | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| if (attr->ia_size > sbi->s_bitmap_maxbytes) { | |
| error = -EFBIG; | |
| goto err_out; | |
| } | |
| } | |
| } | |
| if (S_ISREG(inode->i_mode) && | |
| attr->ia_valid & ATTR_SIZE && attr->ia_size < inode->i_size) { | |
| handle_t *handle; | |
| handle = ext4_journal_start(inode, 3); | |
| if (IS_ERR(handle)) { | |
| error = PTR_ERR(handle); | |
| goto err_out; | |
| } | |
| error = ext4_orphan_add(handle, inode); | |
| EXT4_I(inode)->i_disksize = attr->ia_size; | |
| rc = ext4_mark_inode_dirty(handle, inode); | |
| if (!error) | |
| error = rc; | |
| ext4_journal_stop(handle); | |
| if (ext4_should_order_data(inode)) { | |
| error = ext4_begin_ordered_truncate(inode, | |
| attr->ia_size); | |
| if (error) { | |
| /* Do as much error cleanup as possible */ | |
| handle = ext4_journal_start(inode, 3); | |
| if (IS_ERR(handle)) { | |
| ext4_orphan_del(NULL, inode); | |
| goto err_out; | |
| } | |
| ext4_orphan_del(handle, inode); | |
| ext4_journal_stop(handle); | |
| goto err_out; | |
| } | |
| } | |
| } | |
| rc = inode_setattr(inode, attr); | |
| /* If inode_setattr's call to ext4_truncate failed to get a | |
| * transaction handle at all, we need to clean up the in-core | |
| * orphan list manually. */ | |
| if (inode->i_nlink) | |
| ext4_orphan_del(NULL, inode); | |
| if (!rc && (ia_valid & ATTR_MODE)) | |
| rc = ext4_acl_chmod(inode); | |
| err_out: | |
| ext4_std_error(inode->i_sb, error); | |
| if (!error) | |
| error = rc; | |
| return error; | |
| } | |
| int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, | |
| struct kstat *stat) | |
| { | |
| struct inode *inode; | |
| unsigned long delalloc_blocks; | |
| inode = dentry->d_inode; | |
| generic_fillattr(inode, stat); | |
| /* | |
| * We can't update i_blocks if the block allocation is delayed | |
| * otherwise in the case of system crash before the real block | |
| * allocation is done, we will have i_blocks inconsistent with | |
| * on-disk file blocks. | |
| * We always keep i_blocks updated together with real | |
| * allocation. But to not confuse with user, stat | |
| * will return the blocks that include the delayed allocation | |
| * blocks for this file. | |
| */ | |
| spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | |
| delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks; | |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | |
| stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9; | |
| return 0; | |
| } | |
| static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, | |
| int chunk) | |
| { | |
| int indirects; | |
| /* if nrblocks are contiguous */ | |
| if (chunk) { | |
| /* | |
| * With N contiguous data blocks, it need at most | |
| * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks | |
| * 2 dindirect blocks | |
| * 1 tindirect block | |
| */ | |
| indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb); | |
| return indirects + 3; | |
| } | |
| /* | |
| * if nrblocks are not contiguous, worse case, each block touch | |
| * a indirect block, and each indirect block touch a double indirect | |
| * block, plus a triple indirect block | |
| */ | |
| indirects = nrblocks * 2 + 1; | |
| return indirects; | |
| } | |
| static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) | |
| { | |
| if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) | |
| return ext4_indirect_trans_blocks(inode, nrblocks, chunk); | |
| return ext4_ext_index_trans_blocks(inode, nrblocks, chunk); | |
| } | |
| /* | |
| * Account for index blocks, block groups bitmaps and block group | |
| * descriptor blocks if modify datablocks and index blocks | |
| * worse case, the indexs blocks spread over different block groups | |
| * | |
| * If datablocks are discontiguous, they are possible to spread over | |
| * different block groups too. If they are contiugous, with flexbg, | |
| * they could still across block group boundary. | |
| * | |
| * Also account for superblock, inode, quota and xattr blocks | |
| */ | |
| int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk) | |
| { | |
| ext4_group_t groups, ngroups = ext4_get_groups_count(inode->i_sb); | |
| int gdpblocks; | |
| int idxblocks; | |
| int ret = 0; | |
| /* | |
| * How many index blocks need to touch to modify nrblocks? | |
| * The "Chunk" flag indicating whether the nrblocks is | |
| * physically contiguous on disk | |
| * | |
| * For Direct IO and fallocate, they calls get_block to allocate | |
| * one single extent at a time, so they could set the "Chunk" flag | |
| */ | |
| idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk); | |
| ret = idxblocks; | |
| /* | |
| * Now let's see how many group bitmaps and group descriptors need | |
| * to account | |
| */ | |
| groups = idxblocks; | |
| if (chunk) | |
| groups += 1; | |
| else | |
| groups += nrblocks; | |
| gdpblocks = groups; | |
| if (groups > ngroups) | |
| groups = ngroups; | |
| if (groups > EXT4_SB(inode->i_sb)->s_gdb_count) | |
| gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count; | |
| /* bitmaps and block group descriptor blocks */ | |
| ret += groups + gdpblocks; | |
| /* Blocks for super block, inode, quota and xattr blocks */ | |
| ret += EXT4_META_TRANS_BLOCKS(inode->i_sb); | |
| return ret; | |
| } | |
| /* | |
| * Calulate the total number of credits to reserve to fit | |
| * the modification of a single pages into a single transaction, | |
| * which may include multiple chunks of block allocations. | |
| * | |
| * This could be called via ext4_write_begin() | |
| * | |
| * We need to consider the worse case, when | |
| * one new block per extent. | |
| */ | |
| int ext4_writepage_trans_blocks(struct inode *inode) | |
| { | |
| int bpp = ext4_journal_blocks_per_page(inode); | |
| int ret; | |
| ret = ext4_meta_trans_blocks(inode, bpp, 0); | |
| /* Account for data blocks for journalled mode */ | |
| if (ext4_should_journal_data(inode)) | |
| ret += bpp; | |
| return ret; | |
| } | |
| /* | |
| * Calculate the journal credits for a chunk of data modification. | |
| * | |
| * This is called from DIO, fallocate or whoever calling | |
| * ext4_get_blocks() to map/allocate a chunk of contigous disk blocks. | |
| * | |
| * journal buffers for data blocks are not included here, as DIO | |
| * and fallocate do no need to journal data buffers. | |
| */ | |
| int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks) | |
| { | |
| return ext4_meta_trans_blocks(inode, nrblocks, 1); | |
| } | |
| /* | |
| * The caller must have previously called ext4_reserve_inode_write(). | |
| * Give this, we know that the caller already has write access to iloc->bh. | |
| */ | |
| int ext4_mark_iloc_dirty(handle_t *handle, | |
| struct inode *inode, struct ext4_iloc *iloc) | |
| { | |
| int err = 0; | |
| if (test_opt(inode->i_sb, I_VERSION)) | |
| inode_inc_iversion(inode); | |
| /* the do_update_inode consumes one bh->b_count */ | |
| get_bh(iloc->bh); | |
| /* ext4_do_update_inode() does jbd2_journal_dirty_metadata */ | |
| err = ext4_do_update_inode(handle, inode, iloc); | |
| put_bh(iloc->bh); | |
| return err; | |
| } | |
| /* | |
| * On success, We end up with an outstanding reference count against | |
| * iloc->bh. This _must_ be cleaned up later. | |
| */ | |
| int | |
| ext4_reserve_inode_write(handle_t *handle, struct inode *inode, | |
| struct ext4_iloc *iloc) | |
| { | |
| int err; | |
| err = ext4_get_inode_loc(inode, iloc); | |
| if (!err) { | |
| BUFFER_TRACE(iloc->bh, "get_write_access"); | |
| err = ext4_journal_get_write_access(handle, iloc->bh); | |
| if (err) { | |
| brelse(iloc->bh); | |
| iloc->bh = NULL; | |
| } | |
| } | |
| ext4_std_error(inode->i_sb, err); | |
| return err; | |
| } | |
| /* | |
| * Expand an inode by new_extra_isize bytes. | |
| * Returns 0 on success or negative error number on failure. | |
| */ | |
| static int ext4_expand_extra_isize(struct inode *inode, | |
| unsigned int new_extra_isize, | |
| struct ext4_iloc iloc, | |
| handle_t *handle) | |
| { | |
| struct ext4_inode *raw_inode; | |
| struct ext4_xattr_ibody_header *header; | |
| struct ext4_xattr_entry *entry; | |
| if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) | |
| return 0; | |
| raw_inode = ext4_raw_inode(&iloc); | |
| header = IHDR(inode, raw_inode); | |
| entry = IFIRST(header); | |
| /* No extended attributes present */ | |
| if (!(EXT4_I(inode)->i_state & EXT4_STATE_XATTR) || | |
| header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) { | |
| memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE, 0, | |
| new_extra_isize); | |
| EXT4_I(inode)->i_extra_isize = new_extra_isize; | |
| return 0; | |
| } | |
| /* try to expand with EAs present */ | |
| return ext4_expand_extra_isize_ea(inode, new_extra_isize, | |
| raw_inode, handle); | |
| } | |
| /* | |
| * What we do here is to mark the in-core inode as clean with respect to inode | |
| * dirtiness (it may still be data-dirty). | |
| * This means that the in-core inode may be reaped by prune_icache | |
| * without having to perform any I/O. This is a very good thing, | |
| * because *any* task may call prune_icache - even ones which | |
| * have a transaction open against a different journal. | |
| * | |
| * Is this cheating? Not really. Sure, we haven't written the | |
| * inode out, but prune_icache isn't a user-visible syncing function. | |
| * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) | |
| * we start and wait on commits. | |
| * | |
| * Is this efficient/effective? Well, we're being nice to the system | |
| * by cleaning up our inodes proactively so they can be reaped | |
| * without I/O. But we are potentially leaving up to five seconds' | |
| * worth of inodes floating about which prune_icache wants us to | |
| * write out. One way to fix that would be to get prune_icache() | |
| * to do a write_super() to free up some memory. It has the desired | |
| * effect. | |
| */ | |
| int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) | |
| { | |
| struct ext4_iloc iloc; | |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | |
| static unsigned int mnt_count; | |
| int err, ret; | |
| might_sleep(); | |
| err = ext4_reserve_inode_write(handle, inode, &iloc); | |
| if (ext4_handle_valid(handle) && | |
| EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize && | |
| !(EXT4_I(inode)->i_state & EXT4_STATE_NO_EXPAND)) { | |
| /* | |
| * We need extra buffer credits since we may write into EA block | |
| * with this same handle. If journal_extend fails, then it will | |
| * only result in a minor loss of functionality for that inode. | |
| * If this is felt to be critical, then e2fsck should be run to | |
| * force a large enough s_min_extra_isize. | |
| */ | |
| if ((jbd2_journal_extend(handle, | |
| EXT4_DATA_TRANS_BLOCKS(inode->i_sb))) == 0) { | |
| ret = ext4_expand_extra_isize(inode, | |
| sbi->s_want_extra_isize, | |
| iloc, handle); | |
| if (ret) { | |
| EXT4_I(inode)->i_state |= EXT4_STATE_NO_EXPAND; | |
| if (mnt_count != | |
| le16_to_cpu(sbi->s_es->s_mnt_count)) { | |
| ext4_warning(inode->i_sb, __func__, | |
| "Unable to expand inode %lu. Delete" | |
| " some EAs or run e2fsck.", | |
| inode->i_ino); | |
| mnt_count = | |
| le16_to_cpu(sbi->s_es->s_mnt_count); | |
| } | |
| } | |
| } | |
| } | |
| if (!err) | |
| err = ext4_mark_iloc_dirty(handle, inode, &iloc); | |
| return err; | |
| } | |
| /* | |
| * ext4_dirty_inode() is called from __mark_inode_dirty() | |
| * | |
| * We're really interested in the case where a file is being extended. | |
| * i_size has been changed by generic_commit_write() and we thus need | |
| * to include the updated inode in the current transaction. | |
| * | |
| * Also, vfs_dq_alloc_block() will always dirty the inode when blocks | |
| * are allocated to the file. | |
| * | |
| * If the inode is marked synchronous, we don't honour that here - doing | |
| * so would cause a commit on atime updates, which we don't bother doing. | |
| * We handle synchronous inodes at the highest possible level. | |
| */ | |
| void ext4_dirty_inode(struct inode *inode) | |
| { | |
| handle_t *current_handle = ext4_journal_current_handle(); | |
| handle_t *handle; | |
| handle = ext4_journal_start(inode, 2); | |
| if (IS_ERR(handle)) | |
| goto out; | |
| jbd_debug(5, "marking dirty. outer handle=%p\n", current_handle); | |
| ext4_mark_inode_dirty(handle, inode); | |
| ext4_journal_stop(handle); | |
| out: | |
| return; | |
| } | |
| #if 0 | |
| /* | |
| * Bind an inode's backing buffer_head into this transaction, to prevent | |
| * it from being flushed to disk early. Unlike | |
| * ext4_reserve_inode_write, this leaves behind no bh reference and | |
| * returns no iloc structure, so the caller needs to repeat the iloc | |
| * lookup to mark the inode dirty later. | |
| */ | |
| static int ext4_pin_inode(handle_t *handle, struct inode *inode) | |
| { | |
| struct ext4_iloc iloc; | |
| int err = 0; | |
| if (handle) { | |
| err = ext4_get_inode_loc(inode, &iloc); | |
| if (!err) { | |
| BUFFER_TRACE(iloc.bh, "get_write_access"); | |
| err = jbd2_journal_get_write_access(handle, iloc.bh); | |
| if (!err) | |
| err = ext4_handle_dirty_metadata(handle, | |
| inode, | |
| iloc.bh); | |
| brelse(iloc.bh); | |
| } | |
| } | |
| ext4_std_error(inode->i_sb, err); | |
| return err; | |
| } | |
| #endif | |
| int ext4_change_inode_journal_flag(struct inode *inode, int val) | |
| { | |
| journal_t *journal; | |
| handle_t *handle; | |
| int err; | |
| /* | |
| * We have to be very careful here: changing a data block's | |
| * journaling status dynamically is dangerous. If we write a | |
| * data block to the journal, change the status and then delete | |
| * that block, we risk forgetting to revoke the old log record | |
| * from the journal and so a subsequent replay can corrupt data. | |
| * So, first we make sure that the journal is empty and that | |
| * nobody is changing anything. | |
| */ | |
| journal = EXT4_JOURNAL(inode); | |
| if (!journal) | |
| return 0; | |
| if (is_journal_aborted(journal)) | |
| return -EROFS; | |
| jbd2_journal_lock_updates(journal); | |
| jbd2_journal_flush(journal); | |
| /* | |
| * OK, there are no updates running now, and all cached data is | |
| * synced to disk. We are now in a completely consistent state | |
| * which doesn't have anything in the journal, and we know that | |
| * no filesystem updates are running, so it is safe to modify | |
| * the inode's in-core data-journaling state flag now. | |
| */ | |
| if (val) | |
| EXT4_I(inode)->i_flags |= EXT4_JOURNAL_DATA_FL; | |
| else | |
| EXT4_I(inode)->i_flags &= ~EXT4_JOURNAL_DATA_FL; | |
| ext4_set_aops(inode); | |
| jbd2_journal_unlock_updates(journal); | |
| /* Finally we can mark the inode as dirty. */ | |
| handle = ext4_journal_start(inode, 1); | |
| if (IS_ERR(handle)) | |
| return PTR_ERR(handle); | |
| err = ext4_mark_inode_dirty(handle, inode); | |
| ext4_handle_sync(handle); | |
| ext4_journal_stop(handle); | |
| ext4_std_error(inode->i_sb, err); | |
| return err; | |
| } | |
| static int ext4_bh_unmapped(handle_t *handle, struct buffer_head *bh) | |
| { | |
| return !buffer_mapped(bh); | |
| } | |
| int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) | |
| { | |
| struct page *page = vmf->page; | |
| loff_t size; | |
| unsigned long len; | |
| int ret = -EINVAL; | |
| void *fsdata; | |
| struct file *file = vma->vm_file; | |
| struct inode *inode = file->f_path.dentry->d_inode; | |
| struct address_space *mapping = inode->i_mapping; | |
| /* | |
| * Get i_alloc_sem to stop truncates messing with the inode. We cannot | |
| * get i_mutex because we are already holding mmap_sem. | |
| */ | |
| down_read(&inode->i_alloc_sem); | |
| size = i_size_read(inode); | |
| if (page->mapping != mapping || size <= page_offset(page) | |
| || !PageUptodate(page)) { | |
| /* page got truncated from under us? */ | |
| goto out_unlock; | |
| } | |
| ret = 0; | |
| if (PageMappedToDisk(page)) | |
| goto out_unlock; | |
| if (page->index == size >> PAGE_CACHE_SHIFT) | |
| len = size & ~PAGE_CACHE_MASK; | |
| else | |
| len = PAGE_CACHE_SIZE; | |
| lock_page(page); | |
| /* | |
| * return if we have all the buffers mapped. This avoid | |
| * the need to call write_begin/write_end which does a | |
| * journal_start/journal_stop which can block and take | |
| * long time | |
| */ | |
| if (page_has_buffers(page)) { | |
| if (!walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, | |
| ext4_bh_unmapped)) { | |
| unlock_page(page); | |
| goto out_unlock; | |
| } | |
| } | |
| unlock_page(page); | |
| /* | |
| * OK, we need to fill the hole... Do write_begin write_end | |
| * to do block allocation/reservation.We are not holding | |
| * inode.i__mutex here. That allow * parallel write_begin, | |
| * write_end call. lock_page prevent this from happening | |
| * on the same page though | |
| */ | |
| ret = mapping->a_ops->write_begin(file, mapping, page_offset(page), | |
| len, AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata); | |
| if (ret < 0) | |
| goto out_unlock; | |
| ret = mapping->a_ops->write_end(file, mapping, page_offset(page), | |
| len, len, page, fsdata); | |
| if (ret < 0) | |
| goto out_unlock; | |
| ret = 0; | |
| out_unlock: | |
| if (ret) | |
| ret = VM_FAULT_SIGBUS; | |
| up_read(&inode->i_alloc_sem); | |
| return ret; | |
| } |