| /* | 
 |  * Sonics Silicon Backplane | 
 |  * Broadcom MIPS core driver | 
 |  * | 
 |  * Copyright 2005, Broadcom Corporation | 
 |  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> | 
 |  * | 
 |  * Licensed under the GNU/GPL. See COPYING for details. | 
 |  */ | 
 |  | 
 | #include <linux/ssb/ssb.h> | 
 |  | 
 | #include <linux/serial.h> | 
 | #include <linux/serial_core.h> | 
 | #include <linux/serial_reg.h> | 
 | #include <linux/time.h> | 
 |  | 
 | #include "ssb_private.h" | 
 |  | 
 |  | 
 | static inline u32 mips_read32(struct ssb_mipscore *mcore, | 
 | 			      u16 offset) | 
 | { | 
 | 	return ssb_read32(mcore->dev, offset); | 
 | } | 
 |  | 
 | static inline void mips_write32(struct ssb_mipscore *mcore, | 
 | 				u16 offset, | 
 | 				u32 value) | 
 | { | 
 | 	ssb_write32(mcore->dev, offset, value); | 
 | } | 
 |  | 
 | static const u32 ipsflag_irq_mask[] = { | 
 | 	0, | 
 | 	SSB_IPSFLAG_IRQ1, | 
 | 	SSB_IPSFLAG_IRQ2, | 
 | 	SSB_IPSFLAG_IRQ3, | 
 | 	SSB_IPSFLAG_IRQ4, | 
 | }; | 
 |  | 
 | static const u32 ipsflag_irq_shift[] = { | 
 | 	0, | 
 | 	SSB_IPSFLAG_IRQ1_SHIFT, | 
 | 	SSB_IPSFLAG_IRQ2_SHIFT, | 
 | 	SSB_IPSFLAG_IRQ3_SHIFT, | 
 | 	SSB_IPSFLAG_IRQ4_SHIFT, | 
 | }; | 
 |  | 
 | static inline u32 ssb_irqflag(struct ssb_device *dev) | 
 | { | 
 | 	return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; | 
 | } | 
 |  | 
 | /* Get the MIPS IRQ assignment for a specified device. | 
 |  * If unassigned, 0 is returned. | 
 |  */ | 
 | unsigned int ssb_mips_irq(struct ssb_device *dev) | 
 | { | 
 | 	struct ssb_bus *bus = dev->bus; | 
 | 	u32 irqflag; | 
 | 	u32 ipsflag; | 
 | 	u32 tmp; | 
 | 	unsigned int irq; | 
 |  | 
 | 	irqflag = ssb_irqflag(dev); | 
 | 	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); | 
 | 	for (irq = 1; irq <= 4; irq++) { | 
 | 		tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); | 
 | 		if (tmp == irqflag) | 
 | 			break; | 
 | 	} | 
 | 	if (irq	== 5) | 
 | 		irq = 0; | 
 |  | 
 | 	return irq; | 
 | } | 
 |  | 
 | static void clear_irq(struct ssb_bus *bus, unsigned int irq) | 
 | { | 
 | 	struct ssb_device *dev = bus->mipscore.dev; | 
 |  | 
 | 	/* Clear the IRQ in the MIPScore backplane registers */ | 
 | 	if (irq == 0) { | 
 | 		ssb_write32(dev, SSB_INTVEC, 0); | 
 | 	} else { | 
 | 		ssb_write32(dev, SSB_IPSFLAG, | 
 | 			    ssb_read32(dev, SSB_IPSFLAG) | | 
 | 			    ipsflag_irq_mask[irq]); | 
 | 	} | 
 | } | 
 |  | 
 | static void set_irq(struct ssb_device *dev, unsigned int irq) | 
 | { | 
 | 	unsigned int oldirq = ssb_mips_irq(dev); | 
 | 	struct ssb_bus *bus = dev->bus; | 
 | 	struct ssb_device *mdev = bus->mipscore.dev; | 
 | 	u32 irqflag = ssb_irqflag(dev); | 
 |  | 
 | 	dev->irq = irq + 2; | 
 |  | 
 | 	ssb_dprintk(KERN_INFO PFX | 
 | 		    "set_irq: core 0x%04x, irq %d => %d\n", | 
 | 		    dev->id.coreid, oldirq, irq); | 
 | 	/* clear the old irq */ | 
 | 	if (oldirq == 0) | 
 | 		ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); | 
 | 	else | 
 | 		clear_irq(bus, oldirq); | 
 |  | 
 | 	/* assign the new one */ | 
 | 	if (irq == 0) { | 
 | 		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); | 
 | 	} else { | 
 | 		irqflag <<= ipsflag_irq_shift[irq]; | 
 | 		irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); | 
 | 		ssb_write32(mdev, SSB_IPSFLAG, irqflag); | 
 | 	} | 
 | } | 
 |  | 
 | static void ssb_mips_serial_init(struct ssb_mipscore *mcore) | 
 | { | 
 | 	struct ssb_bus *bus = mcore->dev->bus; | 
 |  | 
 | 	if (bus->extif.dev) | 
 | 		mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports); | 
 | 	else if (bus->chipco.dev) | 
 | 		mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports); | 
 | 	else | 
 | 		mcore->nr_serial_ports = 0; | 
 | } | 
 |  | 
 | static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) | 
 | { | 
 | 	struct ssb_bus *bus = mcore->dev->bus; | 
 |  | 
 | 	mcore->flash_buswidth = 2; | 
 | 	if (bus->chipco.dev) { | 
 | 		mcore->flash_window = 0x1c000000; | 
 | 		mcore->flash_window_size = 0x02000000; | 
 | 		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) | 
 | 		               & SSB_CHIPCO_CFG_DS16) == 0) | 
 | 			mcore->flash_buswidth = 1; | 
 | 	} else { | 
 | 		mcore->flash_window = 0x1fc00000; | 
 | 		mcore->flash_window_size = 0x00400000; | 
 | 	} | 
 | } | 
 |  | 
 | u32 ssb_cpu_clock(struct ssb_mipscore *mcore) | 
 | { | 
 | 	struct ssb_bus *bus = mcore->dev->bus; | 
 | 	u32 pll_type, n, m, rate = 0; | 
 |  | 
 | 	if (bus->extif.dev) { | 
 | 		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); | 
 | 	} else if (bus->chipco.dev) { | 
 | 		ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m); | 
 | 	} else | 
 | 		return 0; | 
 |  | 
 | 	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { | 
 | 		rate = 200000000; | 
 | 	} else { | 
 | 		rate = ssb_calc_clock_rate(pll_type, n, m); | 
 | 	} | 
 |  | 
 | 	if (pll_type == SSB_PLLTYPE_6) { | 
 | 		rate *= 2; | 
 | 	} | 
 |  | 
 | 	return rate; | 
 | } | 
 |  | 
 | void ssb_mipscore_init(struct ssb_mipscore *mcore) | 
 | { | 
 | 	struct ssb_bus *bus; | 
 | 	struct ssb_device *dev; | 
 | 	unsigned long hz, ns; | 
 | 	unsigned int irq, i; | 
 |  | 
 | 	if (!mcore->dev) | 
 | 		return; /* We don't have a MIPS core */ | 
 |  | 
 | 	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n"); | 
 |  | 
 | 	bus = mcore->dev->bus; | 
 | 	hz = ssb_clockspeed(bus); | 
 | 	if (!hz) | 
 | 		hz = 100000000; | 
 | 	ns = 1000000000 / hz; | 
 |  | 
 | 	if (bus->extif.dev) | 
 | 		ssb_extif_timing_init(&bus->extif, ns); | 
 | 	else if (bus->chipco.dev) | 
 | 		ssb_chipco_timing_init(&bus->chipco, ns); | 
 |  | 
 | 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ | 
 | 	for (irq = 2, i = 0; i < bus->nr_devices; i++) { | 
 | 		dev = &(bus->devices[i]); | 
 | 		dev->irq = ssb_mips_irq(dev) + 2; | 
 | 		switch (dev->id.coreid) { | 
 | 		case SSB_DEV_USB11_HOST: | 
 | 			/* shouldn't need a separate irq line for non-4710, most of them have a proper | 
 | 			 * external usb controller on the pci */ | 
 | 			if ((bus->chip_id == 0x4710) && (irq <= 4)) { | 
 | 				set_irq(dev, irq++); | 
 | 				break; | 
 | 			} | 
 | 			/* fallthrough */ | 
 | 		case SSB_DEV_PCI: | 
 | 		case SSB_DEV_ETHERNET: | 
 | 		case SSB_DEV_ETHERNET_GBIT: | 
 | 		case SSB_DEV_80211: | 
 | 		case SSB_DEV_USB20_HOST: | 
 | 			/* These devices get their own IRQ line if available, the rest goes on IRQ0 */ | 
 | 			if (irq <= 4) { | 
 | 				set_irq(dev, irq++); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ssb_mips_serial_init(mcore); | 
 | 	ssb_mips_flash_detect(mcore); | 
 | } |