| /****************************************************************************** | |
| * | |
| * Name: acoutput.h -- debug output | |
| * | |
| *****************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2013, Intel Corp. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #ifndef __ACOUTPUT_H__ | |
| #define __ACOUTPUT_H__ | |
| /* | |
| * Debug levels and component IDs. These are used to control the | |
| * granularity of the output of the ACPI_DEBUG_PRINT macro -- on a | |
| * per-component basis and a per-exception-type basis. | |
| */ | |
| /* Component IDs are used in the global "DebugLayer" */ | |
| #define ACPI_UTILITIES 0x00000001 | |
| #define ACPI_HARDWARE 0x00000002 | |
| #define ACPI_EVENTS 0x00000004 | |
| #define ACPI_TABLES 0x00000008 | |
| #define ACPI_NAMESPACE 0x00000010 | |
| #define ACPI_PARSER 0x00000020 | |
| #define ACPI_DISPATCHER 0x00000040 | |
| #define ACPI_EXECUTER 0x00000080 | |
| #define ACPI_RESOURCES 0x00000100 | |
| #define ACPI_CA_DEBUGGER 0x00000200 | |
| #define ACPI_OS_SERVICES 0x00000400 | |
| #define ACPI_CA_DISASSEMBLER 0x00000800 | |
| /* Component IDs for ACPI tools and utilities */ | |
| #define ACPI_COMPILER 0x00001000 | |
| #define ACPI_TOOLS 0x00002000 | |
| #define ACPI_EXAMPLE 0x00004000 | |
| #define ACPI_DRIVER 0x00008000 | |
| #define DT_COMPILER 0x00010000 | |
| #define ASL_PREPROCESSOR 0x00020000 | |
| #define ACPI_ALL_COMPONENTS 0x0001FFFF | |
| #define ACPI_COMPONENT_DEFAULT (ACPI_ALL_COMPONENTS) | |
| /* Component IDs reserved for ACPI drivers */ | |
| #define ACPI_ALL_DRIVERS 0xFFFF0000 | |
| /* | |
| * Raw debug output levels, do not use these in the ACPI_DEBUG_PRINT macros | |
| */ | |
| #define ACPI_LV_INIT 0x00000001 | |
| #define ACPI_LV_DEBUG_OBJECT 0x00000002 | |
| #define ACPI_LV_INFO 0x00000004 | |
| #define ACPI_LV_REPAIR 0x00000008 | |
| #define ACPI_LV_ALL_EXCEPTIONS 0x0000000F | |
| /* Trace verbosity level 1 [Standard Trace Level] */ | |
| #define ACPI_LV_INIT_NAMES 0x00000020 | |
| #define ACPI_LV_PARSE 0x00000040 | |
| #define ACPI_LV_LOAD 0x00000080 | |
| #define ACPI_LV_DISPATCH 0x00000100 | |
| #define ACPI_LV_EXEC 0x00000200 | |
| #define ACPI_LV_NAMES 0x00000400 | |
| #define ACPI_LV_OPREGION 0x00000800 | |
| #define ACPI_LV_BFIELD 0x00001000 | |
| #define ACPI_LV_TABLES 0x00002000 | |
| #define ACPI_LV_VALUES 0x00004000 | |
| #define ACPI_LV_OBJECTS 0x00008000 | |
| #define ACPI_LV_RESOURCES 0x00010000 | |
| #define ACPI_LV_USER_REQUESTS 0x00020000 | |
| #define ACPI_LV_PACKAGE 0x00040000 | |
| #define ACPI_LV_VERBOSITY1 0x0007FF40 | ACPI_LV_ALL_EXCEPTIONS | |
| /* Trace verbosity level 2 [Function tracing and memory allocation] */ | |
| #define ACPI_LV_ALLOCATIONS 0x00100000 | |
| #define ACPI_LV_FUNCTIONS 0x00200000 | |
| #define ACPI_LV_OPTIMIZATIONS 0x00400000 | |
| #define ACPI_LV_VERBOSITY2 0x00700000 | ACPI_LV_VERBOSITY1 | |
| #define ACPI_LV_ALL ACPI_LV_VERBOSITY2 | |
| /* Trace verbosity level 3 [Threading, I/O, and Interrupts] */ | |
| #define ACPI_LV_MUTEX 0x01000000 | |
| #define ACPI_LV_THREADS 0x02000000 | |
| #define ACPI_LV_IO 0x04000000 | |
| #define ACPI_LV_INTERRUPTS 0x08000000 | |
| #define ACPI_LV_VERBOSITY3 0x0F000000 | ACPI_LV_VERBOSITY2 | |
| /* Exceptionally verbose output -- also used in the global "DebugLevel" */ | |
| #define ACPI_LV_AML_DISASSEMBLE 0x10000000 | |
| #define ACPI_LV_VERBOSE_INFO 0x20000000 | |
| #define ACPI_LV_FULL_TABLES 0x40000000 | |
| #define ACPI_LV_EVENTS 0x80000000 | |
| #define ACPI_LV_VERBOSE 0xF0000000 | |
| /* | |
| * Debug level macros that are used in the DEBUG_PRINT macros | |
| */ | |
| #define ACPI_DEBUG_LEVEL(dl) (u32) dl,ACPI_DEBUG_PARAMETERS | |
| /* | |
| * Exception level -- used in the global "DebugLevel" | |
| * | |
| * Note: For errors, use the ACPI_ERROR or ACPI_EXCEPTION interfaces. | |
| * For warnings, use ACPI_WARNING. | |
| */ | |
| #define ACPI_DB_INIT ACPI_DEBUG_LEVEL (ACPI_LV_INIT) | |
| #define ACPI_DB_DEBUG_OBJECT ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT) | |
| #define ACPI_DB_INFO ACPI_DEBUG_LEVEL (ACPI_LV_INFO) | |
| #define ACPI_DB_REPAIR ACPI_DEBUG_LEVEL (ACPI_LV_REPAIR) | |
| #define ACPI_DB_ALL_EXCEPTIONS ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS) | |
| /* Trace level -- also used in the global "DebugLevel" */ | |
| #define ACPI_DB_INIT_NAMES ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES) | |
| #define ACPI_DB_THREADS ACPI_DEBUG_LEVEL (ACPI_LV_THREADS) | |
| #define ACPI_DB_PARSE ACPI_DEBUG_LEVEL (ACPI_LV_PARSE) | |
| #define ACPI_DB_DISPATCH ACPI_DEBUG_LEVEL (ACPI_LV_DISPATCH) | |
| #define ACPI_DB_LOAD ACPI_DEBUG_LEVEL (ACPI_LV_LOAD) | |
| #define ACPI_DB_EXEC ACPI_DEBUG_LEVEL (ACPI_LV_EXEC) | |
| #define ACPI_DB_NAMES ACPI_DEBUG_LEVEL (ACPI_LV_NAMES) | |
| #define ACPI_DB_OPREGION ACPI_DEBUG_LEVEL (ACPI_LV_OPREGION) | |
| #define ACPI_DB_BFIELD ACPI_DEBUG_LEVEL (ACPI_LV_BFIELD) | |
| #define ACPI_DB_TABLES ACPI_DEBUG_LEVEL (ACPI_LV_TABLES) | |
| #define ACPI_DB_FUNCTIONS ACPI_DEBUG_LEVEL (ACPI_LV_FUNCTIONS) | |
| #define ACPI_DB_OPTIMIZATIONS ACPI_DEBUG_LEVEL (ACPI_LV_OPTIMIZATIONS) | |
| #define ACPI_DB_VALUES ACPI_DEBUG_LEVEL (ACPI_LV_VALUES) | |
| #define ACPI_DB_OBJECTS ACPI_DEBUG_LEVEL (ACPI_LV_OBJECTS) | |
| #define ACPI_DB_ALLOCATIONS ACPI_DEBUG_LEVEL (ACPI_LV_ALLOCATIONS) | |
| #define ACPI_DB_RESOURCES ACPI_DEBUG_LEVEL (ACPI_LV_RESOURCES) | |
| #define ACPI_DB_IO ACPI_DEBUG_LEVEL (ACPI_LV_IO) | |
| #define ACPI_DB_INTERRUPTS ACPI_DEBUG_LEVEL (ACPI_LV_INTERRUPTS) | |
| #define ACPI_DB_USER_REQUESTS ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS) | |
| #define ACPI_DB_PACKAGE ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE) | |
| #define ACPI_DB_MUTEX ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX) | |
| #define ACPI_DB_EVENTS ACPI_DEBUG_LEVEL (ACPI_LV_EVENTS) | |
| #define ACPI_DB_ALL ACPI_DEBUG_LEVEL (ACPI_LV_ALL) | |
| /* Defaults for debug_level, debug and normal */ | |
| #define ACPI_DEBUG_DEFAULT (ACPI_LV_INFO | ACPI_LV_REPAIR) | |
| #define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT | ACPI_LV_REPAIR) | |
| #define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL) | |
| #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES) | |
| /* | |
| * The module name is used primarily for error and debug messages. | |
| * The __FILE__ macro is not very useful for this, because it | |
| * usually includes the entire pathname to the module making the | |
| * debug output difficult to read. | |
| */ | |
| #define ACPI_MODULE_NAME(name) static const char ACPI_UNUSED_VAR _acpi_module_name[] = name; | |
| #else | |
| /* | |
| * For the no-debug and no-error-msg cases, we must at least define | |
| * a null module name. | |
| */ | |
| #define ACPI_MODULE_NAME(name) | |
| #define _acpi_module_name "" | |
| #endif | |
| /* | |
| * Ascii error messages can be configured out | |
| */ | |
| #ifndef ACPI_NO_ERROR_MESSAGES | |
| #define AE_INFO _acpi_module_name, __LINE__ | |
| /* | |
| * Error reporting. Callers module and line number are inserted by AE_INFO, | |
| * the plist contains a set of parens to allow variable-length lists. | |
| * These macros are used for both the debug and non-debug versions of the code. | |
| */ | |
| #define ACPI_INFO(plist) acpi_info plist | |
| #define ACPI_WARNING(plist) acpi_warning plist | |
| #define ACPI_EXCEPTION(plist) acpi_exception plist | |
| #define ACPI_ERROR(plist) acpi_error plist | |
| #define ACPI_BIOS_WARNING(plist) acpi_bios_warning plist | |
| #define ACPI_BIOS_ERROR(plist) acpi_bios_error plist | |
| #define ACPI_DEBUG_OBJECT(obj,l,i) acpi_ex_do_debug_object(obj,l,i) | |
| #else | |
| /* No error messages */ | |
| #define ACPI_INFO(plist) | |
| #define ACPI_WARNING(plist) | |
| #define ACPI_EXCEPTION(plist) | |
| #define ACPI_ERROR(plist) | |
| #define ACPI_BIOS_WARNING(plist) | |
| #define ACPI_BIOS_ERROR(plist) | |
| #define ACPI_DEBUG_OBJECT(obj,l,i) | |
| #endif /* ACPI_NO_ERROR_MESSAGES */ | |
| /* | |
| * Debug macros that are conditionally compiled | |
| */ | |
| #ifdef ACPI_DEBUG_OUTPUT | |
| /* | |
| * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header, | |
| * define it now. This is the case where there the compiler does not support | |
| * a __FUNCTION__ macro or equivalent. | |
| */ | |
| #ifndef ACPI_GET_FUNCTION_NAME | |
| #define ACPI_GET_FUNCTION_NAME _acpi_function_name | |
| /* | |
| * The Name parameter should be the procedure name as a quoted string. | |
| * The function name is also used by the function exit macros below. | |
| * Note: (const char) is used to be compatible with the debug interfaces | |
| * and macros such as __FUNCTION__. | |
| */ | |
| #define ACPI_FUNCTION_NAME(name) static const char _acpi_function_name[] = #name; | |
| #else | |
| /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */ | |
| #define ACPI_FUNCTION_NAME(name) | |
| #endif /* ACPI_GET_FUNCTION_NAME */ | |
| /* | |
| * Common parameters used for debug output functions: | |
| * line number, function name, module(file) name, component ID | |
| */ | |
| #define ACPI_DEBUG_PARAMETERS \ | |
| __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT | |
| /* Check if debug output is currently dynamically enabled */ | |
| #define ACPI_IS_DEBUG_ENABLED(level, component) \ | |
| ((level & acpi_dbg_level) && (component & acpi_dbg_layer)) | |
| /* | |
| * Master debug print macros | |
| * Print message if and only if: | |
| * 1) Debug print for the current component is enabled | |
| * 2) Debug error level or trace level for the print statement is enabled | |
| * | |
| * November 2012: Moved the runtime check for whether to actually emit the | |
| * debug message outside of the print function itself. This improves overall | |
| * performance at a relatively small code cost. Implementation involves the | |
| * use of variadic macros supported by C99. | |
| * | |
| * Note: the ACPI_DO_WHILE0 macro is used to prevent some compilers from | |
| * complaining about these constructs. On other compilers the do...while | |
| * adds some extra code, so this feature is optional. | |
| */ | |
| #ifdef ACPI_USE_DO_WHILE_0 | |
| #define ACPI_DO_WHILE0(a) do a while(0) | |
| #else | |
| #define ACPI_DO_WHILE0(a) a | |
| #endif | |
| /* DEBUG_PRINT functions */ | |
| #define ACPI_DEBUG_PRINT(plist) ACPI_ACTUAL_DEBUG plist | |
| #define ACPI_DEBUG_PRINT_RAW(plist) ACPI_ACTUAL_DEBUG_RAW plist | |
| /* Helper macros for DEBUG_PRINT */ | |
| #define ACPI_DO_DEBUG_PRINT(function, level, line, filename, modulename, component, ...) \ | |
| ACPI_DO_WHILE0 ({ \ | |
| if (ACPI_IS_DEBUG_ENABLED (level, component)) \ | |
| { \ | |
| function (level, line, filename, modulename, component, __VA_ARGS__); \ | |
| } \ | |
| }) | |
| #define ACPI_ACTUAL_DEBUG(level, line, filename, modulename, component, ...) \ | |
| ACPI_DO_DEBUG_PRINT (acpi_debug_print, level, line, \ | |
| filename, modulename, component, __VA_ARGS__) | |
| #define ACPI_ACTUAL_DEBUG_RAW(level, line, filename, modulename, component, ...) \ | |
| ACPI_DO_DEBUG_PRINT (acpi_debug_print_raw, level, line, \ | |
| filename, modulename, component, __VA_ARGS__) | |
| /* | |
| * Function entry tracing | |
| * | |
| * The name of the function is emitted as a local variable that is | |
| * intended to be used by both the entry trace and the exit trace. | |
| */ | |
| /* Helper macro */ | |
| #define ACPI_TRACE_ENTRY(name, function, cast, param) \ | |
| ACPI_FUNCTION_NAME (name) \ | |
| function (ACPI_DEBUG_PARAMETERS, cast (param)) | |
| /* The actual entry trace macros */ | |
| #define ACPI_FUNCTION_TRACE(name) \ | |
| ACPI_FUNCTION_NAME(name) \ | |
| acpi_ut_trace (ACPI_DEBUG_PARAMETERS) | |
| #define ACPI_FUNCTION_TRACE_PTR(name, pointer) \ | |
| ACPI_TRACE_ENTRY (name, acpi_ut_trace_ptr, (void *), pointer) | |
| #define ACPI_FUNCTION_TRACE_U32(name, value) \ | |
| ACPI_TRACE_ENTRY (name, acpi_ut_trace_u32, (u32), value) | |
| #define ACPI_FUNCTION_TRACE_STR(name, string) \ | |
| ACPI_TRACE_ENTRY (name, acpi_ut_trace_str, (char *), string) | |
| #define ACPI_FUNCTION_ENTRY() \ | |
| acpi_ut_track_stack_ptr() | |
| /* | |
| * Function exit tracing | |
| * | |
| * These macros include a return statement. This is usually considered | |
| * bad form, but having a separate exit macro before the actual return | |
| * is very ugly and difficult to maintain. | |
| * | |
| * One of the FUNCTION_TRACE macros above must be used in conjunction | |
| * with these macros so that "_AcpiFunctionName" is defined. | |
| */ | |
| /* Exit trace helper macro */ | |
| #define ACPI_TRACE_EXIT(function, cast, param) \ | |
| ACPI_DO_WHILE0 ({ \ | |
| function (ACPI_DEBUG_PARAMETERS, cast (param)); \ | |
| return ((param)); \ | |
| }) | |
| /* The actual exit macros */ | |
| #define return_VOID \ | |
| ACPI_DO_WHILE0 ({ \ | |
| acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \ | |
| return; \ | |
| }) | |
| #define return_ACPI_STATUS(status) \ | |
| ACPI_TRACE_EXIT (acpi_ut_status_exit, (acpi_status), status) | |
| #define return_PTR(pointer) \ | |
| ACPI_TRACE_EXIT (acpi_ut_ptr_exit, (u8 *), pointer) | |
| #define return_VALUE(value) \ | |
| ACPI_TRACE_EXIT (acpi_ut_value_exit, (u64), value) | |
| /* Conditional execution */ | |
| #define ACPI_DEBUG_EXEC(a) a | |
| #define ACPI_DEBUG_ONLY_MEMBERS(a) a; | |
| #define _VERBOSE_STRUCTURES | |
| /* Various object display routines for debug */ | |
| #define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0) | |
| #define ACPI_DUMP_OPERANDS(a, b ,c) acpi_ex_dump_operands(a, b, c) | |
| #define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b) | |
| #define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d) | |
| #define ACPI_DUMP_BUFFER(a, b) acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT) | |
| #else /* ACPI_DEBUG_OUTPUT */ | |
| /* | |
| * This is the non-debug case -- make everything go away, | |
| * leaving no executable debug code! | |
| */ | |
| #define ACPI_FUNCTION_NAME(a) | |
| #define ACPI_DEBUG_PRINT(pl) | |
| #define ACPI_DEBUG_PRINT_RAW(pl) | |
| #define ACPI_DEBUG_EXEC(a) | |
| #define ACPI_DEBUG_ONLY_MEMBERS(a) | |
| #define ACPI_FUNCTION_TRACE(a) | |
| #define ACPI_FUNCTION_TRACE_PTR(a, b) | |
| #define ACPI_FUNCTION_TRACE_U32(a, b) | |
| #define ACPI_FUNCTION_TRACE_STR(a, b) | |
| #define ACPI_FUNCTION_EXIT | |
| #define ACPI_FUNCTION_STATUS_EXIT(s) | |
| #define ACPI_FUNCTION_VALUE_EXIT(s) | |
| #define ACPI_FUNCTION_ENTRY() | |
| #define ACPI_DUMP_STACK_ENTRY(a) | |
| #define ACPI_DUMP_OPERANDS(a, b, c) | |
| #define ACPI_DUMP_ENTRY(a, b) | |
| #define ACPI_DUMP_TABLES(a, b) | |
| #define ACPI_DUMP_PATHNAME(a, b, c, d) | |
| #define ACPI_DUMP_BUFFER(a, b) | |
| #define ACPI_DEBUG_PRINT(pl) | |
| #define ACPI_DEBUG_PRINT_RAW(pl) | |
| #define ACPI_IS_DEBUG_ENABLED(level, component) 0 | |
| /* Return macros must have a return statement at the minimum */ | |
| #define return_VOID return | |
| #define return_ACPI_STATUS(s) return(s) | |
| #define return_VALUE(s) return(s) | |
| #define return_PTR(s) return(s) | |
| #endif /* ACPI_DEBUG_OUTPUT */ | |
| #endif /* __ACOUTPUT_H__ */ |