| /* | |
| * Common prep/chrp pci routines. -- Cort | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/delay.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/capability.h> | |
| #include <linux/sched.h> | |
| #include <linux/errno.h> | |
| #include <linux/bootmem.h> | |
| #include <asm/processor.h> | |
| #include <asm/io.h> | |
| #include <asm/prom.h> | |
| #include <asm/sections.h> | |
| #include <asm/pci-bridge.h> | |
| #include <asm/byteorder.h> | |
| #include <asm/irq.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/machdep.h> | |
| #undef DEBUG | |
| #ifdef DEBUG | |
| #define DBG(x...) printk(x) | |
| #else | |
| #define DBG(x...) | |
| #endif | |
| unsigned long isa_io_base = 0; | |
| unsigned long isa_mem_base = 0; | |
| unsigned long pci_dram_offset = 0; | |
| int pcibios_assign_bus_offset = 1; | |
| void pcibios_make_OF_bus_map(void); | |
| static int pci_relocate_bridge_resource(struct pci_bus *bus, int i); | |
| static int probe_resource(struct pci_bus *parent, struct resource *pr, | |
| struct resource *res, struct resource **conflict); | |
| static void update_bridge_base(struct pci_bus *bus, int i); | |
| static void pcibios_fixup_resources(struct pci_dev* dev); | |
| static void fixup_broken_pcnet32(struct pci_dev* dev); | |
| static int reparent_resources(struct resource *parent, struct resource *res); | |
| static void fixup_cpc710_pci64(struct pci_dev* dev); | |
| /* By default, we don't re-assign bus numbers. | |
| */ | |
| int pci_assign_all_buses; | |
| struct pci_controller* hose_head; | |
| struct pci_controller** hose_tail = &hose_head; | |
| static int pci_bus_count; | |
| static void | |
| fixup_broken_pcnet32(struct pci_dev* dev) | |
| { | |
| if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { | |
| dev->vendor = PCI_VENDOR_ID_AMD; | |
| pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); | |
| } | |
| } | |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); | |
| static void | |
| fixup_cpc710_pci64(struct pci_dev* dev) | |
| { | |
| /* Hide the PCI64 BARs from the kernel as their content doesn't | |
| * fit well in the resource management | |
| */ | |
| dev->resource[0].start = dev->resource[0].end = 0; | |
| dev->resource[0].flags = 0; | |
| dev->resource[1].start = dev->resource[1].end = 0; | |
| dev->resource[1].flags = 0; | |
| } | |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64); | |
| static void | |
| pcibios_fixup_resources(struct pci_dev *dev) | |
| { | |
| struct pci_controller* hose = (struct pci_controller *)dev->sysdata; | |
| int i; | |
| unsigned long offset; | |
| if (!hose) { | |
| printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev)); | |
| return; | |
| } | |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { | |
| struct resource *res = dev->resource + i; | |
| if (!res->flags) | |
| continue; | |
| if (res->end == 0xffffffff) { | |
| DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n", | |
| pci_name(dev), i, | |
| (unsigned long long)res->start, | |
| (unsigned long long)res->end); | |
| res->end -= res->start; | |
| res->start = 0; | |
| res->flags |= IORESOURCE_UNSET; | |
| continue; | |
| } | |
| offset = 0; | |
| if (res->flags & IORESOURCE_MEM) { | |
| offset = hose->pci_mem_offset; | |
| } else if (res->flags & IORESOURCE_IO) { | |
| offset = (unsigned long) hose->io_base_virt | |
| - isa_io_base; | |
| } | |
| if (offset != 0) { | |
| res->start += offset; | |
| res->end += offset; | |
| #ifdef DEBUG | |
| printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n", | |
| i, res->flags, pci_name(dev), | |
| res->start - offset, res->start); | |
| #endif | |
| } | |
| } | |
| /* Call machine specific resource fixup */ | |
| if (ppc_md.pcibios_fixup_resources) | |
| ppc_md.pcibios_fixup_resources(dev); | |
| } | |
| DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); | |
| void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, | |
| struct resource *res) | |
| { | |
| unsigned long offset = 0; | |
| struct pci_controller *hose = dev->sysdata; | |
| if (hose && res->flags & IORESOURCE_IO) | |
| offset = (unsigned long)hose->io_base_virt - isa_io_base; | |
| else if (hose && res->flags & IORESOURCE_MEM) | |
| offset = hose->pci_mem_offset; | |
| region->start = res->start - offset; | |
| region->end = res->end - offset; | |
| } | |
| EXPORT_SYMBOL(pcibios_resource_to_bus); | |
| void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, | |
| struct pci_bus_region *region) | |
| { | |
| unsigned long offset = 0; | |
| struct pci_controller *hose = dev->sysdata; | |
| if (hose && res->flags & IORESOURCE_IO) | |
| offset = (unsigned long)hose->io_base_virt - isa_io_base; | |
| else if (hose && res->flags & IORESOURCE_MEM) | |
| offset = hose->pci_mem_offset; | |
| res->start = region->start + offset; | |
| res->end = region->end + offset; | |
| } | |
| EXPORT_SYMBOL(pcibios_bus_to_resource); | |
| /* | |
| * We need to avoid collisions with `mirrored' VGA ports | |
| * and other strange ISA hardware, so we always want the | |
| * addresses to be allocated in the 0x000-0x0ff region | |
| * modulo 0x400. | |
| * | |
| * Why? Because some silly external IO cards only decode | |
| * the low 10 bits of the IO address. The 0x00-0xff region | |
| * is reserved for motherboard devices that decode all 16 | |
| * bits, so it's ok to allocate at, say, 0x2800-0x28ff, | |
| * but we want to try to avoid allocating at 0x2900-0x2bff | |
| * which might have be mirrored at 0x0100-0x03ff.. | |
| */ | |
| void pcibios_align_resource(void *data, struct resource *res, | |
| resource_size_t size, resource_size_t align) | |
| { | |
| struct pci_dev *dev = data; | |
| if (res->flags & IORESOURCE_IO) { | |
| resource_size_t start = res->start; | |
| if (size > 0x100) { | |
| printk(KERN_ERR "PCI: I/O Region %s/%d too large" | |
| " (%lld bytes)\n", pci_name(dev), | |
| dev->resource - res, (unsigned long long)size); | |
| } | |
| if (start & 0x300) { | |
| start = (start + 0x3ff) & ~0x3ff; | |
| res->start = start; | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(pcibios_align_resource); | |
| /* | |
| * Handle resources of PCI devices. If the world were perfect, we could | |
| * just allocate all the resource regions and do nothing more. It isn't. | |
| * On the other hand, we cannot just re-allocate all devices, as it would | |
| * require us to know lots of host bridge internals. So we attempt to | |
| * keep as much of the original configuration as possible, but tweak it | |
| * when it's found to be wrong. | |
| * | |
| * Known BIOS problems we have to work around: | |
| * - I/O or memory regions not configured | |
| * - regions configured, but not enabled in the command register | |
| * - bogus I/O addresses above 64K used | |
| * - expansion ROMs left enabled (this may sound harmless, but given | |
| * the fact the PCI specs explicitly allow address decoders to be | |
| * shared between expansion ROMs and other resource regions, it's | |
| * at least dangerous) | |
| * | |
| * Our solution: | |
| * (1) Allocate resources for all buses behind PCI-to-PCI bridges. | |
| * This gives us fixed barriers on where we can allocate. | |
| * (2) Allocate resources for all enabled devices. If there is | |
| * a collision, just mark the resource as unallocated. Also | |
| * disable expansion ROMs during this step. | |
| * (3) Try to allocate resources for disabled devices. If the | |
| * resources were assigned correctly, everything goes well, | |
| * if they weren't, they won't disturb allocation of other | |
| * resources. | |
| * (4) Assign new addresses to resources which were either | |
| * not configured at all or misconfigured. If explicitly | |
| * requested by the user, configure expansion ROM address | |
| * as well. | |
| */ | |
| static void __init | |
| pcibios_allocate_bus_resources(struct list_head *bus_list) | |
| { | |
| struct pci_bus *bus; | |
| int i; | |
| struct resource *res, *pr; | |
| /* Depth-First Search on bus tree */ | |
| list_for_each_entry(bus, bus_list, node) { | |
| for (i = 0; i < 4; ++i) { | |
| if ((res = bus->resource[i]) == NULL || !res->flags | |
| || res->start > res->end) | |
| continue; | |
| if (bus->parent == NULL) | |
| pr = (res->flags & IORESOURCE_IO)? | |
| &ioport_resource: &iomem_resource; | |
| else { | |
| pr = pci_find_parent_resource(bus->self, res); | |
| if (pr == res) { | |
| /* this happens when the generic PCI | |
| * code (wrongly) decides that this | |
| * bridge is transparent -- paulus | |
| */ | |
| continue; | |
| } | |
| } | |
| DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n", | |
| (unsigned long long)res->start, | |
| (unsigned long long)res->end, res->flags, pr); | |
| if (pr) { | |
| if (request_resource(pr, res) == 0) | |
| continue; | |
| /* | |
| * Must be a conflict with an existing entry. | |
| * Move that entry (or entries) under the | |
| * bridge resource and try again. | |
| */ | |
| if (reparent_resources(pr, res) == 0) | |
| continue; | |
| } | |
| printk(KERN_ERR "PCI: Cannot allocate resource region " | |
| "%d of PCI bridge %d\n", i, bus->number); | |
| if (pci_relocate_bridge_resource(bus, i)) | |
| bus->resource[i] = NULL; | |
| } | |
| pcibios_allocate_bus_resources(&bus->children); | |
| } | |
| } | |
| /* | |
| * Reparent resource children of pr that conflict with res | |
| * under res, and make res replace those children. | |
| */ | |
| static int __init | |
| reparent_resources(struct resource *parent, struct resource *res) | |
| { | |
| struct resource *p, **pp; | |
| struct resource **firstpp = NULL; | |
| for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { | |
| if (p->end < res->start) | |
| continue; | |
| if (res->end < p->start) | |
| break; | |
| if (p->start < res->start || p->end > res->end) | |
| return -1; /* not completely contained */ | |
| if (firstpp == NULL) | |
| firstpp = pp; | |
| } | |
| if (firstpp == NULL) | |
| return -1; /* didn't find any conflicting entries? */ | |
| res->parent = parent; | |
| res->child = *firstpp; | |
| res->sibling = *pp; | |
| *firstpp = res; | |
| *pp = NULL; | |
| for (p = res->child; p != NULL; p = p->sibling) { | |
| p->parent = res; | |
| DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n", | |
| p->name, (unsigned long long)p->start, | |
| (unsigned long long)p->end, res->name); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * A bridge has been allocated a range which is outside the range | |
| * of its parent bridge, so it needs to be moved. | |
| */ | |
| static int __init | |
| pci_relocate_bridge_resource(struct pci_bus *bus, int i) | |
| { | |
| struct resource *res, *pr, *conflict; | |
| unsigned long try, size; | |
| int j; | |
| struct pci_bus *parent = bus->parent; | |
| if (parent == NULL) { | |
| /* shouldn't ever happen */ | |
| printk(KERN_ERR "PCI: can't move host bridge resource\n"); | |
| return -1; | |
| } | |
| res = bus->resource[i]; | |
| if (res == NULL) | |
| return -1; | |
| pr = NULL; | |
| for (j = 0; j < 4; j++) { | |
| struct resource *r = parent->resource[j]; | |
| if (!r) | |
| continue; | |
| if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM)) | |
| continue; | |
| if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) { | |
| pr = r; | |
| break; | |
| } | |
| if (res->flags & IORESOURCE_PREFETCH) | |
| pr = r; | |
| } | |
| if (pr == NULL) | |
| return -1; | |
| size = res->end - res->start; | |
| if (pr->start > pr->end || size > pr->end - pr->start) | |
| return -1; | |
| try = pr->end; | |
| for (;;) { | |
| res->start = try - size; | |
| res->end = try; | |
| if (probe_resource(bus->parent, pr, res, &conflict) == 0) | |
| break; | |
| if (conflict->start <= pr->start + size) | |
| return -1; | |
| try = conflict->start - 1; | |
| } | |
| if (request_resource(pr, res)) { | |
| DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n", | |
| (unsigned long long)res->start, | |
| (unsigned long long)res->end); | |
| return -1; /* "can't happen" */ | |
| } | |
| update_bridge_base(bus, i); | |
| printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n", | |
| bus->number, i, (unsigned long long)res->start, | |
| (unsigned long long)res->end); | |
| return 0; | |
| } | |
| static int __init | |
| probe_resource(struct pci_bus *parent, struct resource *pr, | |
| struct resource *res, struct resource **conflict) | |
| { | |
| struct pci_bus *bus; | |
| struct pci_dev *dev; | |
| struct resource *r; | |
| int i; | |
| for (r = pr->child; r != NULL; r = r->sibling) { | |
| if (r->end >= res->start && res->end >= r->start) { | |
| *conflict = r; | |
| return 1; | |
| } | |
| } | |
| list_for_each_entry(bus, &parent->children, node) { | |
| for (i = 0; i < 4; ++i) { | |
| if ((r = bus->resource[i]) == NULL) | |
| continue; | |
| if (!r->flags || r->start > r->end || r == res) | |
| continue; | |
| if (pci_find_parent_resource(bus->self, r) != pr) | |
| continue; | |
| if (r->end >= res->start && res->end >= r->start) { | |
| *conflict = r; | |
| return 1; | |
| } | |
| } | |
| } | |
| list_for_each_entry(dev, &parent->devices, bus_list) { | |
| for (i = 0; i < 6; ++i) { | |
| r = &dev->resource[i]; | |
| if (!r->flags || (r->flags & IORESOURCE_UNSET)) | |
| continue; | |
| if (pci_find_parent_resource(dev, r) != pr) | |
| continue; | |
| if (r->end >= res->start && res->end >= r->start) { | |
| *conflict = r; | |
| return 1; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static void __init | |
| update_bridge_base(struct pci_bus *bus, int i) | |
| { | |
| struct resource *res = bus->resource[i]; | |
| u8 io_base_lo, io_limit_lo; | |
| u16 mem_base, mem_limit; | |
| u16 cmd; | |
| unsigned long start, end, off; | |
| struct pci_dev *dev = bus->self; | |
| struct pci_controller *hose = dev->sysdata; | |
| if (!hose) { | |
| printk("update_bridge_base: no hose?\n"); | |
| return; | |
| } | |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); | |
| pci_write_config_word(dev, PCI_COMMAND, | |
| cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)); | |
| if (res->flags & IORESOURCE_IO) { | |
| off = (unsigned long) hose->io_base_virt - isa_io_base; | |
| start = res->start - off; | |
| end = res->end - off; | |
| io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK; | |
| io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK; | |
| if (end > 0xffff) { | |
| pci_write_config_word(dev, PCI_IO_BASE_UPPER16, | |
| start >> 16); | |
| pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, | |
| end >> 16); | |
| io_base_lo |= PCI_IO_RANGE_TYPE_32; | |
| } else | |
| io_base_lo |= PCI_IO_RANGE_TYPE_16; | |
| pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo); | |
| pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo); | |
| } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) | |
| == IORESOURCE_MEM) { | |
| off = hose->pci_mem_offset; | |
| mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK; | |
| mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK; | |
| pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base); | |
| pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit); | |
| } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) | |
| == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) { | |
| off = hose->pci_mem_offset; | |
| mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK; | |
| mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK; | |
| pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base); | |
| pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit); | |
| } else { | |
| DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n", | |
| pci_name(dev), i, res->flags); | |
| } | |
| pci_write_config_word(dev, PCI_COMMAND, cmd); | |
| } | |
| static inline void alloc_resource(struct pci_dev *dev, int idx) | |
| { | |
| struct resource *pr, *r = &dev->resource[idx]; | |
| DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n", | |
| pci_name(dev), idx, (unsigned long long)r->start, | |
| (unsigned long long)r->end, r->flags); | |
| pr = pci_find_parent_resource(dev, r); | |
| if (!pr || request_resource(pr, r) < 0) { | |
| printk(KERN_ERR "PCI: Cannot allocate resource region %d" | |
| " of device %s\n", idx, pci_name(dev)); | |
| if (pr) | |
| DBG("PCI: parent is %p: %016llx-%016llx (f=%lx)\n", | |
| pr, (unsigned long long)pr->start, | |
| (unsigned long long)pr->end, pr->flags); | |
| /* We'll assign a new address later */ | |
| r->flags |= IORESOURCE_UNSET; | |
| r->end -= r->start; | |
| r->start = 0; | |
| } | |
| } | |
| static void __init | |
| pcibios_allocate_resources(int pass) | |
| { | |
| struct pci_dev *dev = NULL; | |
| int idx, disabled; | |
| u16 command; | |
| struct resource *r; | |
| for_each_pci_dev(dev) { | |
| pci_read_config_word(dev, PCI_COMMAND, &command); | |
| for (idx = 0; idx < 6; idx++) { | |
| r = &dev->resource[idx]; | |
| if (r->parent) /* Already allocated */ | |
| continue; | |
| if (!r->flags || (r->flags & IORESOURCE_UNSET)) | |
| continue; /* Not assigned at all */ | |
| if (r->flags & IORESOURCE_IO) | |
| disabled = !(command & PCI_COMMAND_IO); | |
| else | |
| disabled = !(command & PCI_COMMAND_MEMORY); | |
| if (pass == disabled) | |
| alloc_resource(dev, idx); | |
| } | |
| if (pass) | |
| continue; | |
| r = &dev->resource[PCI_ROM_RESOURCE]; | |
| if (r->flags & IORESOURCE_ROM_ENABLE) { | |
| /* Turn the ROM off, leave the resource region, but keep it unregistered. */ | |
| u32 reg; | |
| DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); | |
| r->flags &= ~IORESOURCE_ROM_ENABLE; | |
| pci_read_config_dword(dev, dev->rom_base_reg, ®); | |
| pci_write_config_dword(dev, dev->rom_base_reg, | |
| reg & ~PCI_ROM_ADDRESS_ENABLE); | |
| } | |
| } | |
| } | |
| static void __init | |
| pcibios_assign_resources(void) | |
| { | |
| struct pci_dev *dev = NULL; | |
| int idx; | |
| struct resource *r; | |
| for_each_pci_dev(dev) { | |
| int class = dev->class >> 8; | |
| /* Don't touch classless devices and host bridges */ | |
| if (!class || class == PCI_CLASS_BRIDGE_HOST) | |
| continue; | |
| for (idx = 0; idx < 6; idx++) { | |
| r = &dev->resource[idx]; | |
| /* | |
| * We shall assign a new address to this resource, | |
| * either because the BIOS (sic) forgot to do so | |
| * or because we have decided the old address was | |
| * unusable for some reason. | |
| */ | |
| if ((r->flags & IORESOURCE_UNSET) && r->end && | |
| (!ppc_md.pcibios_enable_device_hook || | |
| !ppc_md.pcibios_enable_device_hook(dev, 1))) { | |
| r->flags &= ~IORESOURCE_UNSET; | |
| pci_assign_resource(dev, idx); | |
| } | |
| } | |
| #if 0 /* don't assign ROMs */ | |
| r = &dev->resource[PCI_ROM_RESOURCE]; | |
| r->end -= r->start; | |
| r->start = 0; | |
| if (r->end) | |
| pci_assign_resource(dev, PCI_ROM_RESOURCE); | |
| #endif | |
| } | |
| } | |
| static int next_controller_index; | |
| struct pci_controller * __init | |
| pcibios_alloc_controller(void) | |
| { | |
| struct pci_controller *hose; | |
| hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose)); | |
| memset(hose, 0, sizeof(struct pci_controller)); | |
| *hose_tail = hose; | |
| hose_tail = &hose->next; | |
| hose->index = next_controller_index++; | |
| return hose; | |
| } | |
| void pcibios_make_OF_bus_map(void) | |
| { | |
| } | |
| static int __init | |
| pcibios_init(void) | |
| { | |
| struct pci_controller *hose; | |
| struct pci_bus *bus; | |
| int next_busno; | |
| printk(KERN_INFO "PCI: Probing PCI hardware\n"); | |
| /* Scan all of the recorded PCI controllers. */ | |
| for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { | |
| if (pci_assign_all_buses) | |
| hose->first_busno = next_busno; | |
| hose->last_busno = 0xff; | |
| bus = pci_scan_bus(hose->first_busno, hose->ops, hose); | |
| hose->last_busno = bus->subordinate; | |
| if (pci_assign_all_buses || next_busno <= hose->last_busno) | |
| next_busno = hose->last_busno + pcibios_assign_bus_offset; | |
| } | |
| pci_bus_count = next_busno; | |
| /* OpenFirmware based machines need a map of OF bus | |
| * numbers vs. kernel bus numbers since we may have to | |
| * remap them. | |
| */ | |
| if (pci_assign_all_buses && have_of) | |
| pcibios_make_OF_bus_map(); | |
| /* Do machine dependent PCI interrupt routing */ | |
| if (ppc_md.pci_swizzle && ppc_md.pci_map_irq) | |
| pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq); | |
| /* Call machine dependent fixup */ | |
| if (ppc_md.pcibios_fixup) | |
| ppc_md.pcibios_fixup(); | |
| /* Allocate and assign resources */ | |
| pcibios_allocate_bus_resources(&pci_root_buses); | |
| pcibios_allocate_resources(0); | |
| pcibios_allocate_resources(1); | |
| pcibios_assign_resources(); | |
| /* Call machine dependent post-init code */ | |
| if (ppc_md.pcibios_after_init) | |
| ppc_md.pcibios_after_init(); | |
| return 0; | |
| } | |
| subsys_initcall(pcibios_init); | |
| unsigned char __init | |
| common_swizzle(struct pci_dev *dev, unsigned char *pinp) | |
| { | |
| struct pci_controller *hose = dev->sysdata; | |
| if (dev->bus->number != hose->first_busno) { | |
| u8 pin = *pinp; | |
| do { | |
| pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); | |
| /* Move up the chain of bridges. */ | |
| dev = dev->bus->self; | |
| } while (dev->bus->self); | |
| *pinp = pin; | |
| /* The slot is the idsel of the last bridge. */ | |
| } | |
| return PCI_SLOT(dev->devfn); | |
| } | |
| unsigned long resource_fixup(struct pci_dev * dev, struct resource * res, | |
| unsigned long start, unsigned long size) | |
| { | |
| return start; | |
| } | |
| void __init pcibios_fixup_bus(struct pci_bus *bus) | |
| { | |
| struct pci_controller *hose = (struct pci_controller *) bus->sysdata; | |
| unsigned long io_offset; | |
| struct resource *res; | |
| int i; | |
| io_offset = (unsigned long)hose->io_base_virt - isa_io_base; | |
| if (bus->parent == NULL) { | |
| /* This is a host bridge - fill in its resources */ | |
| hose->bus = bus; | |
| bus->resource[0] = res = &hose->io_resource; | |
| if (!res->flags) { | |
| if (io_offset) | |
| printk(KERN_ERR "I/O resource not set for host" | |
| " bridge %d\n", hose->index); | |
| res->start = 0; | |
| res->end = IO_SPACE_LIMIT; | |
| res->flags = IORESOURCE_IO; | |
| } | |
| res->start += io_offset; | |
| res->end += io_offset; | |
| for (i = 0; i < 3; ++i) { | |
| res = &hose->mem_resources[i]; | |
| if (!res->flags) { | |
| if (i > 0) | |
| continue; | |
| printk(KERN_ERR "Memory resource not set for " | |
| "host bridge %d\n", hose->index); | |
| res->start = hose->pci_mem_offset; | |
| res->end = ~0U; | |
| res->flags = IORESOURCE_MEM; | |
| } | |
| bus->resource[i+1] = res; | |
| } | |
| } else { | |
| /* This is a subordinate bridge */ | |
| pci_read_bridge_bases(bus); | |
| for (i = 0; i < 4; ++i) { | |
| if ((res = bus->resource[i]) == NULL) | |
| continue; | |
| if (!res->flags) | |
| continue; | |
| if (io_offset && (res->flags & IORESOURCE_IO)) { | |
| res->start += io_offset; | |
| res->end += io_offset; | |
| } else if (hose->pci_mem_offset | |
| && (res->flags & IORESOURCE_MEM)) { | |
| res->start += hose->pci_mem_offset; | |
| res->end += hose->pci_mem_offset; | |
| } | |
| } | |
| } | |
| if (ppc_md.pcibios_fixup_bus) | |
| ppc_md.pcibios_fixup_bus(bus); | |
| } | |
| char __init *pcibios_setup(char *str) | |
| { | |
| return str; | |
| } | |
| /* the next one is stolen from the alpha port... */ | |
| void __init | |
| pcibios_update_irq(struct pci_dev *dev, int irq) | |
| { | |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); | |
| /* XXX FIXME - update OF device tree node interrupt property */ | |
| } | |
| int pcibios_enable_device(struct pci_dev *dev, int mask) | |
| { | |
| if (ppc_md.pcibios_enable_device_hook) | |
| if (ppc_md.pcibios_enable_device_hook(dev, 0)) | |
| return -EINVAL; | |
| return pci_enable_resources(dev, mask); | |
| } | |
| struct pci_controller* | |
| pci_bus_to_hose(int bus) | |
| { | |
| struct pci_controller* hose = hose_head; | |
| for (; hose; hose = hose->next) | |
| if (bus >= hose->first_busno && bus <= hose->last_busno) | |
| return hose; | |
| return NULL; | |
| } | |
| void __iomem * | |
| pci_bus_io_base(unsigned int bus) | |
| { | |
| struct pci_controller *hose; | |
| hose = pci_bus_to_hose(bus); | |
| if (!hose) | |
| return NULL; | |
| return hose->io_base_virt; | |
| } | |
| unsigned long | |
| pci_bus_io_base_phys(unsigned int bus) | |
| { | |
| struct pci_controller *hose; | |
| hose = pci_bus_to_hose(bus); | |
| if (!hose) | |
| return 0; | |
| return hose->io_base_phys; | |
| } | |
| unsigned long | |
| pci_bus_mem_base_phys(unsigned int bus) | |
| { | |
| struct pci_controller *hose; | |
| hose = pci_bus_to_hose(bus); | |
| if (!hose) | |
| return 0; | |
| return hose->pci_mem_offset; | |
| } | |
| unsigned long | |
| pci_resource_to_bus(struct pci_dev *pdev, struct resource *res) | |
| { | |
| /* Hack alert again ! See comments in chrp_pci.c | |
| */ | |
| struct pci_controller* hose = | |
| (struct pci_controller *)pdev->sysdata; | |
| if (hose && res->flags & IORESOURCE_MEM) | |
| return res->start - hose->pci_mem_offset; | |
| /* We may want to do something with IOs here... */ | |
| return res->start; | |
| } | |
| static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, | |
| resource_size_t *offset, | |
| enum pci_mmap_state mmap_state) | |
| { | |
| struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); | |
| unsigned long io_offset = 0; | |
| int i, res_bit; | |
| if (hose == 0) | |
| return NULL; /* should never happen */ | |
| /* If memory, add on the PCI bridge address offset */ | |
| if (mmap_state == pci_mmap_mem) { | |
| #if 0 /* See comment in pci_resource_to_user() for why this is disabled */ | |
| *offset += hose->pci_mem_offset; | |
| #endif | |
| res_bit = IORESOURCE_MEM; | |
| } else { | |
| io_offset = hose->io_base_virt - ___IO_BASE; | |
| *offset += io_offset; | |
| res_bit = IORESOURCE_IO; | |
| } | |
| /* | |
| * Check that the offset requested corresponds to one of the | |
| * resources of the device. | |
| */ | |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { | |
| struct resource *rp = &dev->resource[i]; | |
| int flags = rp->flags; | |
| /* treat ROM as memory (should be already) */ | |
| if (i == PCI_ROM_RESOURCE) | |
| flags |= IORESOURCE_MEM; | |
| /* Active and same type? */ | |
| if ((flags & res_bit) == 0) | |
| continue; | |
| /* In the range of this resource? */ | |
| if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) | |
| continue; | |
| /* found it! construct the final physical address */ | |
| if (mmap_state == pci_mmap_io) | |
| *offset += hose->io_base_phys - io_offset; | |
| return rp; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci | |
| * device mapping. | |
| */ | |
| static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, | |
| pgprot_t protection, | |
| enum pci_mmap_state mmap_state, | |
| int write_combine) | |
| { | |
| unsigned long prot = pgprot_val(protection); | |
| /* Write combine is always 0 on non-memory space mappings. On | |
| * memory space, if the user didn't pass 1, we check for a | |
| * "prefetchable" resource. This is a bit hackish, but we use | |
| * this to workaround the inability of /sysfs to provide a write | |
| * combine bit | |
| */ | |
| if (mmap_state != pci_mmap_mem) | |
| write_combine = 0; | |
| else if (write_combine == 0) { | |
| if (rp->flags & IORESOURCE_PREFETCH) | |
| write_combine = 1; | |
| } | |
| /* XXX would be nice to have a way to ask for write-through */ | |
| prot |= _PAGE_NO_CACHE; | |
| if (write_combine) | |
| prot &= ~_PAGE_GUARDED; | |
| else | |
| prot |= _PAGE_GUARDED; | |
| printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev), | |
| (unsigned long long)rp->start, prot); | |
| return __pgprot(prot); | |
| } | |
| /* | |
| * This one is used by /dev/mem and fbdev who have no clue about the | |
| * PCI device, it tries to find the PCI device first and calls the | |
| * above routine | |
| */ | |
| pgprot_t pci_phys_mem_access_prot(struct file *file, | |
| unsigned long pfn, | |
| unsigned long size, | |
| pgprot_t protection) | |
| { | |
| struct pci_dev *pdev = NULL; | |
| struct resource *found = NULL; | |
| unsigned long prot = pgprot_val(protection); | |
| unsigned long offset = pfn << PAGE_SHIFT; | |
| int i; | |
| if (page_is_ram(pfn)) | |
| return prot; | |
| prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; | |
| for_each_pci_dev(pdev) { | |
| for (i = 0; i <= PCI_ROM_RESOURCE; i++) { | |
| struct resource *rp = &pdev->resource[i]; | |
| int flags = rp->flags; | |
| /* Active and same type? */ | |
| if ((flags & IORESOURCE_MEM) == 0) | |
| continue; | |
| /* In the range of this resource? */ | |
| if (offset < (rp->start & PAGE_MASK) || | |
| offset > rp->end) | |
| continue; | |
| found = rp; | |
| break; | |
| } | |
| if (found) | |
| break; | |
| } | |
| if (found) { | |
| if (found->flags & IORESOURCE_PREFETCH) | |
| prot &= ~_PAGE_GUARDED; | |
| pci_dev_put(pdev); | |
| } | |
| DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); | |
| return __pgprot(prot); | |
| } | |
| /* | |
| * Perform the actual remap of the pages for a PCI device mapping, as | |
| * appropriate for this architecture. The region in the process to map | |
| * is described by vm_start and vm_end members of VMA, the base physical | |
| * address is found in vm_pgoff. | |
| * The pci device structure is provided so that architectures may make mapping | |
| * decisions on a per-device or per-bus basis. | |
| * | |
| * Returns a negative error code on failure, zero on success. | |
| */ | |
| int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, | |
| enum pci_mmap_state mmap_state, | |
| int write_combine) | |
| { | |
| resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT; | |
| struct resource *rp; | |
| int ret; | |
| rp = __pci_mmap_make_offset(dev, &offset, mmap_state); | |
| if (rp == NULL) | |
| return -EINVAL; | |
| vma->vm_pgoff = offset >> PAGE_SHIFT; | |
| vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, | |
| vma->vm_page_prot, | |
| mmap_state, write_combine); | |
| ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | |
| vma->vm_end - vma->vm_start, vma->vm_page_prot); | |
| return ret; | |
| } | |
| /* Obsolete functions. Should be removed once the symbios driver | |
| * is fixed | |
| */ | |
| unsigned long | |
| phys_to_bus(unsigned long pa) | |
| { | |
| struct pci_controller *hose; | |
| int i; | |
| for (hose = hose_head; hose; hose = hose->next) { | |
| for (i = 0; i < 3; ++i) { | |
| if (pa >= hose->mem_resources[i].start | |
| && pa <= hose->mem_resources[i].end) { | |
| /* | |
| * XXX the hose->pci_mem_offset really | |
| * only applies to mem_resources[0]. | |
| * We need a way to store an offset for | |
| * the others. -- paulus | |
| */ | |
| if (i == 0) | |
| pa -= hose->pci_mem_offset; | |
| return pa; | |
| } | |
| } | |
| } | |
| /* hmmm, didn't find it */ | |
| return 0; | |
| } | |
| unsigned long | |
| pci_phys_to_bus(unsigned long pa, int busnr) | |
| { | |
| struct pci_controller* hose = pci_bus_to_hose(busnr); | |
| if (!hose) | |
| return pa; | |
| return pa - hose->pci_mem_offset; | |
| } | |
| unsigned long | |
| pci_bus_to_phys(unsigned int ba, int busnr) | |
| { | |
| struct pci_controller* hose = pci_bus_to_hose(busnr); | |
| if (!hose) | |
| return ba; | |
| return ba + hose->pci_mem_offset; | |
| } | |
| /* Provide information on locations of various I/O regions in physical | |
| * memory. Do this on a per-card basis so that we choose the right | |
| * root bridge. | |
| * Note that the returned IO or memory base is a physical address | |
| */ | |
| long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) | |
| { | |
| struct pci_controller* hose; | |
| long result = -EOPNOTSUPP; | |
| hose = pci_bus_to_hose(bus); | |
| if (!hose) | |
| return -ENODEV; | |
| switch (which) { | |
| case IOBASE_BRIDGE_NUMBER: | |
| return (long)hose->first_busno; | |
| case IOBASE_MEMORY: | |
| return (long)hose->pci_mem_offset; | |
| case IOBASE_IO: | |
| return (long)hose->io_base_phys; | |
| case IOBASE_ISA_IO: | |
| return (long)isa_io_base; | |
| case IOBASE_ISA_MEM: | |
| return (long)isa_mem_base; | |
| } | |
| return result; | |
| } | |
| void pci_resource_to_user(const struct pci_dev *dev, int bar, | |
| const struct resource *rsrc, | |
| resource_size_t *start, resource_size_t *end) | |
| { | |
| struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); | |
| resource_size_t offset = 0; | |
| if (hose == NULL) | |
| return; | |
| if (rsrc->flags & IORESOURCE_IO) | |
| offset = (unsigned long)hose->io_base_virt - _IO_BASE; | |
| /* We pass a fully fixed up address to userland for MMIO instead of | |
| * a BAR value because X is lame and expects to be able to use that | |
| * to pass to /dev/mem ! | |
| * | |
| * That means that we'll have potentially 64 bits values where some | |
| * userland apps only expect 32 (like X itself since it thinks only | |
| * Sparc has 64 bits MMIO) but if we don't do that, we break it on | |
| * 32 bits CHRPs :-( | |
| * | |
| * Hopefully, the sysfs insterface is immune to that gunk. Once X | |
| * has been fixed (and the fix spread enough), we can re-enable the | |
| * 2 lines below and pass down a BAR value to userland. In that case | |
| * we'll also have to re-enable the matching code in | |
| * __pci_mmap_make_offset(). | |
| * | |
| * BenH. | |
| */ | |
| #if 0 | |
| else if (rsrc->flags & IORESOURCE_MEM) | |
| offset = hose->pci_mem_offset; | |
| #endif | |
| *start = rsrc->start - offset; | |
| *end = rsrc->end - offset; | |
| } | |
| void __init pci_init_resource(struct resource *res, resource_size_t start, | |
| resource_size_t end, int flags, char *name) | |
| { | |
| res->start = start; | |
| res->end = end; | |
| res->flags = flags; | |
| res->name = name; | |
| res->parent = NULL; | |
| res->sibling = NULL; | |
| res->child = NULL; | |
| } | |
| void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) | |
| { | |
| resource_size_t start = pci_resource_start(dev, bar); | |
| resource_size_t len = pci_resource_len(dev, bar); | |
| unsigned long flags = pci_resource_flags(dev, bar); | |
| if (!len) | |
| return NULL; | |
| if (max && len > max) | |
| len = max; | |
| if (flags & IORESOURCE_IO) | |
| return ioport_map(start, len); | |
| if (flags & IORESOURCE_MEM) | |
| /* Not checking IORESOURCE_CACHEABLE because PPC does | |
| * not currently distinguish between ioremap and | |
| * ioremap_nocache. | |
| */ | |
| return ioremap(start, len); | |
| /* What? */ | |
| return NULL; | |
| } | |
| void pci_iounmap(struct pci_dev *dev, void __iomem *addr) | |
| { | |
| /* Nothing to do */ | |
| } | |
| EXPORT_SYMBOL(pci_iomap); | |
| EXPORT_SYMBOL(pci_iounmap); | |
| unsigned long pci_address_to_pio(phys_addr_t address) | |
| { | |
| struct pci_controller* hose = hose_head; | |
| for (; hose; hose = hose->next) { | |
| unsigned int size = hose->io_resource.end - | |
| hose->io_resource.start + 1; | |
| if (address >= hose->io_base_phys && | |
| address < (hose->io_base_phys + size)) { | |
| unsigned long base = | |
| (unsigned long)hose->io_base_virt - _IO_BASE; | |
| return base + (address - hose->io_base_phys); | |
| } | |
| } | |
| return (unsigned int)-1; | |
| } | |
| EXPORT_SYMBOL(pci_address_to_pio); | |
| /* | |
| * Null PCI config access functions, for the case when we can't | |
| * find a hose. | |
| */ | |
| #define NULL_PCI_OP(rw, size, type) \ | |
| static int \ | |
| null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ | |
| { \ | |
| return PCIBIOS_DEVICE_NOT_FOUND; \ | |
| } | |
| static int | |
| null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, | |
| int len, u32 *val) | |
| { | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| } | |
| static int | |
| null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, | |
| int len, u32 val) | |
| { | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| } | |
| static struct pci_ops null_pci_ops = | |
| { | |
| null_read_config, | |
| null_write_config | |
| }; | |
| /* | |
| * These functions are used early on before PCI scanning is done | |
| * and all of the pci_dev and pci_bus structures have been created. | |
| */ | |
| static struct pci_bus * | |
| fake_pci_bus(struct pci_controller *hose, int busnr) | |
| { | |
| static struct pci_bus bus; | |
| if (hose == 0) { | |
| hose = pci_bus_to_hose(busnr); | |
| if (hose == 0) | |
| printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); | |
| } | |
| bus.number = busnr; | |
| bus.sysdata = hose; | |
| bus.ops = hose? hose->ops: &null_pci_ops; | |
| return &bus; | |
| } | |
| #define EARLY_PCI_OP(rw, size, type) \ | |
| int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ | |
| int devfn, int offset, type value) \ | |
| { \ | |
| return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ | |
| devfn, offset, value); \ | |
| } | |
| EARLY_PCI_OP(read, byte, u8 *) | |
| EARLY_PCI_OP(read, word, u16 *) | |
| EARLY_PCI_OP(read, dword, u32 *) | |
| EARLY_PCI_OP(write, byte, u8) | |
| EARLY_PCI_OP(write, word, u16) | |
| EARLY_PCI_OP(write, dword, u32) |