| /* | 
 |  *  Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/signal.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/version.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/crc32.h> | 
 | #include <linux/if_vlan.h> | 
 | #include <linux/uaccess.h> | 
 |  | 
 | /* Version Information */ | 
 | #define DRIVER_VERSION "v1.0.0 (2013/05/03)" | 
 | #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>" | 
 | #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" | 
 | #define MODULENAME "r8152" | 
 |  | 
 | #define R8152_PHY_ID		32 | 
 |  | 
 | #define PLA_IDR			0xc000 | 
 | #define PLA_RCR			0xc010 | 
 | #define PLA_RMS			0xc016 | 
 | #define PLA_RXFIFO_CTRL0	0xc0a0 | 
 | #define PLA_RXFIFO_CTRL1	0xc0a4 | 
 | #define PLA_RXFIFO_CTRL2	0xc0a8 | 
 | #define PLA_FMC			0xc0b4 | 
 | #define PLA_CFG_WOL		0xc0b6 | 
 | #define PLA_MAR			0xcd00 | 
 | #define PAL_BDC_CR		0xd1a0 | 
 | #define PLA_LEDSEL		0xdd90 | 
 | #define PLA_LED_FEATURE		0xdd92 | 
 | #define PLA_PHYAR		0xde00 | 
 | #define PLA_GPHY_INTR_IMR	0xe022 | 
 | #define PLA_EEE_CR		0xe040 | 
 | #define PLA_EEEP_CR		0xe080 | 
 | #define PLA_MAC_PWR_CTRL	0xe0c0 | 
 | #define PLA_TCR0		0xe610 | 
 | #define PLA_TCR1		0xe612 | 
 | #define PLA_TXFIFO_CTRL		0xe618 | 
 | #define PLA_RSTTELLY		0xe800 | 
 | #define PLA_CR			0xe813 | 
 | #define PLA_CRWECR		0xe81c | 
 | #define PLA_CONFIG5		0xe822 | 
 | #define PLA_PHY_PWR		0xe84c | 
 | #define PLA_OOB_CTRL		0xe84f | 
 | #define PLA_CPCR		0xe854 | 
 | #define PLA_MISC_0		0xe858 | 
 | #define PLA_MISC_1		0xe85a | 
 | #define PLA_OCP_GPHY_BASE	0xe86c | 
 | #define PLA_TELLYCNT		0xe890 | 
 | #define PLA_SFF_STS_7		0xe8de | 
 | #define PLA_PHYSTATUS		0xe908 | 
 | #define PLA_BP_BA		0xfc26 | 
 | #define PLA_BP_0		0xfc28 | 
 | #define PLA_BP_1		0xfc2a | 
 | #define PLA_BP_2		0xfc2c | 
 | #define PLA_BP_3		0xfc2e | 
 | #define PLA_BP_4		0xfc30 | 
 | #define PLA_BP_5		0xfc32 | 
 | #define PLA_BP_6		0xfc34 | 
 | #define PLA_BP_7		0xfc36 | 
 |  | 
 | #define USB_DEV_STAT		0xb808 | 
 | #define USB_USB_CTRL		0xd406 | 
 | #define USB_PHY_CTRL		0xd408 | 
 | #define USB_TX_AGG		0xd40a | 
 | #define USB_RX_BUF_TH		0xd40c | 
 | #define USB_USB_TIMER		0xd428 | 
 | #define USB_PM_CTRL_STATUS	0xd432 | 
 | #define USB_TX_DMA		0xd434 | 
 | #define USB_UPS_CTRL		0xd800 | 
 | #define USB_BP_BA		0xfc26 | 
 | #define USB_BP_0		0xfc28 | 
 | #define USB_BP_1		0xfc2a | 
 | #define USB_BP_2		0xfc2c | 
 | #define USB_BP_3		0xfc2e | 
 | #define USB_BP_4		0xfc30 | 
 | #define USB_BP_5		0xfc32 | 
 | #define USB_BP_6		0xfc34 | 
 | #define USB_BP_7		0xfc36 | 
 |  | 
 | /* OCP Registers */ | 
 | #define OCP_ALDPS_CONFIG	0x2010 | 
 | #define OCP_EEE_CONFIG1		0x2080 | 
 | #define OCP_EEE_CONFIG2		0x2092 | 
 | #define OCP_EEE_CONFIG3		0x2094 | 
 | #define OCP_EEE_AR		0xa41a | 
 | #define OCP_EEE_DATA		0xa41c | 
 |  | 
 | /* PLA_RCR */ | 
 | #define RCR_AAP			0x00000001 | 
 | #define RCR_APM			0x00000002 | 
 | #define RCR_AM			0x00000004 | 
 | #define RCR_AB			0x00000008 | 
 | #define RCR_ACPT_ALL		(RCR_AAP | RCR_APM | RCR_AM | RCR_AB) | 
 |  | 
 | /* PLA_RXFIFO_CTRL0 */ | 
 | #define RXFIFO_THR1_NORMAL	0x00080002 | 
 | #define RXFIFO_THR1_OOB		0x01800003 | 
 |  | 
 | /* PLA_RXFIFO_CTRL1 */ | 
 | #define RXFIFO_THR2_FULL	0x00000060 | 
 | #define RXFIFO_THR2_HIGH	0x00000038 | 
 | #define RXFIFO_THR2_OOB		0x0000004a | 
 |  | 
 | /* PLA_RXFIFO_CTRL2 */ | 
 | #define RXFIFO_THR3_FULL	0x00000078 | 
 | #define RXFIFO_THR3_HIGH	0x00000048 | 
 | #define RXFIFO_THR3_OOB		0x0000005a | 
 |  | 
 | /* PLA_TXFIFO_CTRL */ | 
 | #define TXFIFO_THR_NORMAL	0x00400008 | 
 |  | 
 | /* PLA_FMC */ | 
 | #define FMC_FCR_MCU_EN		0x0001 | 
 |  | 
 | /* PLA_EEEP_CR */ | 
 | #define EEEP_CR_EEEP_TX		0x0002 | 
 |  | 
 | /* PLA_TCR0 */ | 
 | #define TCR0_TX_EMPTY		0x0800 | 
 | #define TCR0_AUTO_FIFO		0x0080 | 
 |  | 
 | /* PLA_TCR1 */ | 
 | #define VERSION_MASK		0x7cf0 | 
 |  | 
 | /* PLA_CR */ | 
 | #define CR_RST			0x10 | 
 | #define CR_RE			0x08 | 
 | #define CR_TE			0x04 | 
 |  | 
 | /* PLA_CRWECR */ | 
 | #define CRWECR_NORAML		0x00 | 
 | #define CRWECR_CONFIG		0xc0 | 
 |  | 
 | /* PLA_OOB_CTRL */ | 
 | #define NOW_IS_OOB		0x80 | 
 | #define TXFIFO_EMPTY		0x20 | 
 | #define RXFIFO_EMPTY		0x10 | 
 | #define LINK_LIST_READY		0x02 | 
 | #define DIS_MCU_CLROOB		0x01 | 
 | #define FIFO_EMPTY		(TXFIFO_EMPTY | RXFIFO_EMPTY) | 
 |  | 
 | /* PLA_MISC_1 */ | 
 | #define RXDY_GATED_EN		0x0008 | 
 |  | 
 | /* PLA_SFF_STS_7 */ | 
 | #define RE_INIT_LL		0x8000 | 
 | #define MCU_BORW_EN		0x4000 | 
 |  | 
 | /* PLA_CPCR */ | 
 | #define CPCR_RX_VLAN		0x0040 | 
 |  | 
 | /* PLA_CFG_WOL */ | 
 | #define MAGIC_EN		0x0001 | 
 |  | 
 | /* PAL_BDC_CR */ | 
 | #define ALDPS_PROXY_MODE	0x0001 | 
 |  | 
 | /* PLA_CONFIG5 */ | 
 | #define LAN_WAKE_EN		0x0002 | 
 |  | 
 | /* PLA_LED_FEATURE */ | 
 | #define LED_MODE_MASK		0x0700 | 
 |  | 
 | /* PLA_PHY_PWR */ | 
 | #define TX_10M_IDLE_EN		0x0080 | 
 | #define PFM_PWM_SWITCH		0x0040 | 
 |  | 
 | /* PLA_MAC_PWR_CTRL */ | 
 | #define D3_CLK_GATED_EN		0x00004000 | 
 | #define MCU_CLK_RATIO		0x07010f07 | 
 | #define MCU_CLK_RATIO_MASK	0x0f0f0f0f | 
 |  | 
 | /* PLA_GPHY_INTR_IMR */ | 
 | #define GPHY_STS_MSK		0x0001 | 
 | #define SPEED_DOWN_MSK		0x0002 | 
 | #define SPDWN_RXDV_MSK		0x0004 | 
 | #define SPDWN_LINKCHG_MSK	0x0008 | 
 |  | 
 | /* PLA_PHYAR */ | 
 | #define PHYAR_FLAG		0x80000000 | 
 |  | 
 | /* PLA_EEE_CR */ | 
 | #define EEE_RX_EN		0x0001 | 
 | #define EEE_TX_EN		0x0002 | 
 |  | 
 | /* USB_DEV_STAT */ | 
 | #define STAT_SPEED_MASK		0x0006 | 
 | #define STAT_SPEED_HIGH		0x0000 | 
 | #define STAT_SPEED_FULL		0x0001 | 
 |  | 
 | /* USB_TX_AGG */ | 
 | #define TX_AGG_MAX_THRESHOLD	0x03 | 
 |  | 
 | /* USB_RX_BUF_TH */ | 
 | #define RX_BUF_THR		0x7a120180 | 
 |  | 
 | /* USB_TX_DMA */ | 
 | #define TEST_MODE_DISABLE	0x00000001 | 
 | #define TX_SIZE_ADJUST1		0x00000100 | 
 |  | 
 | /* USB_UPS_CTRL */ | 
 | #define POWER_CUT		0x0100 | 
 |  | 
 | /* USB_PM_CTRL_STATUS */ | 
 | #define RWSUME_INDICATE		0x0001 | 
 |  | 
 | /* USB_USB_CTRL */ | 
 | #define RX_AGG_DISABLE		0x0010 | 
 |  | 
 | /* OCP_ALDPS_CONFIG */ | 
 | #define ENPWRSAVE		0x8000 | 
 | #define ENPDNPS			0x0200 | 
 | #define LINKENA			0x0100 | 
 | #define DIS_SDSAVE		0x0010 | 
 |  | 
 | /* OCP_EEE_CONFIG1 */ | 
 | #define RG_TXLPI_MSK_HFDUP	0x8000 | 
 | #define RG_MATCLR_EN		0x4000 | 
 | #define EEE_10_CAP		0x2000 | 
 | #define EEE_NWAY_EN		0x1000 | 
 | #define TX_QUIET_EN		0x0200 | 
 | #define RX_QUIET_EN		0x0100 | 
 | #define SDRISETIME		0x0010	/* bit 4 ~ 6 */ | 
 | #define RG_RXLPI_MSK_HFDUP	0x0008 | 
 | #define SDFALLTIME		0x0007	/* bit 0 ~ 2 */ | 
 |  | 
 | /* OCP_EEE_CONFIG2 */ | 
 | #define RG_LPIHYS_NUM		0x7000	/* bit 12 ~ 15 */ | 
 | #define RG_DACQUIET_EN		0x0400 | 
 | #define RG_LDVQUIET_EN		0x0200 | 
 | #define RG_CKRSEL		0x0020 | 
 | #define RG_EEEPRG_EN		0x0010 | 
 |  | 
 | /* OCP_EEE_CONFIG3 */ | 
 | #define FST_SNR_EYE_R		0x1500	/* bit 7 ~ 15 */ | 
 | #define RG_LFS_SEL		0x0060	/* bit 6 ~ 5 */ | 
 | #define MSK_PH			0x0006	/* bit 0 ~ 3 */ | 
 |  | 
 | /* OCP_EEE_AR */ | 
 | /* bit[15:14] function */ | 
 | #define FUN_ADDR		0x0000 | 
 | #define FUN_DATA		0x4000 | 
 | /* bit[4:0] device addr */ | 
 | #define DEVICE_ADDR		0x0007 | 
 |  | 
 | /* OCP_EEE_DATA */ | 
 | #define EEE_ADDR		0x003C | 
 | #define EEE_DATA		0x0002 | 
 |  | 
 | enum rtl_register_content { | 
 | 	_100bps		= 0x08, | 
 | 	_10bps		= 0x04, | 
 | 	LINK_STATUS	= 0x02, | 
 | 	FULL_DUP	= 0x01, | 
 | }; | 
 |  | 
 | #define RTL8152_REQT_READ	0xc0 | 
 | #define RTL8152_REQT_WRITE	0x40 | 
 | #define RTL8152_REQ_GET_REGS	0x05 | 
 | #define RTL8152_REQ_SET_REGS	0x05 | 
 |  | 
 | #define BYTE_EN_DWORD		0xff | 
 | #define BYTE_EN_WORD		0x33 | 
 | #define BYTE_EN_BYTE		0x11 | 
 | #define BYTE_EN_SIX_BYTES	0x3f | 
 | #define BYTE_EN_START_MASK	0x0f | 
 | #define BYTE_EN_END_MASK	0xf0 | 
 |  | 
 | #define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + VLAN_HLEN) | 
 | #define RTL8152_TX_TIMEOUT	(HZ) | 
 |  | 
 | /* rtl8152 flags */ | 
 | enum rtl8152_flags { | 
 | 	RTL8152_UNPLUG = 0, | 
 | 	RX_URB_FAIL, | 
 | 	RTL8152_SET_RX_MODE, | 
 | 	WORK_ENABLE | 
 | }; | 
 |  | 
 | /* Define these values to match your device */ | 
 | #define VENDOR_ID_REALTEK		0x0bda | 
 | #define PRODUCT_ID_RTL8152		0x8152 | 
 |  | 
 | #define MCU_TYPE_PLA			0x0100 | 
 | #define MCU_TYPE_USB			0x0000 | 
 |  | 
 | struct rx_desc { | 
 | 	u32 opts1; | 
 | #define RX_LEN_MASK			0x7fff | 
 | 	u32 opts2; | 
 | 	u32 opts3; | 
 | 	u32 opts4; | 
 | 	u32 opts5; | 
 | 	u32 opts6; | 
 | }; | 
 |  | 
 | struct tx_desc { | 
 | 	u32 opts1; | 
 | #define TX_FS			(1 << 31) /* First segment of a packet */ | 
 | #define TX_LS			(1 << 30) /* Final segment of a packet */ | 
 | #define TX_LEN_MASK		0xffff | 
 | 	u32 opts2; | 
 | }; | 
 |  | 
 | struct r8152 { | 
 | 	unsigned long flags; | 
 | 	struct usb_device *udev; | 
 | 	struct tasklet_struct tl; | 
 | 	struct net_device *netdev; | 
 | 	struct urb *rx_urb, *tx_urb; | 
 | 	struct sk_buff *tx_skb, *rx_skb; | 
 | 	struct delayed_work schedule; | 
 | 	struct mii_if_info mii; | 
 | 	u32 msg_enable; | 
 | 	u16 ocp_base; | 
 | 	u8 version; | 
 | 	u8 speed; | 
 | }; | 
 |  | 
 | enum rtl_version { | 
 | 	RTL_VER_UNKNOWN = 0, | 
 | 	RTL_VER_01, | 
 | 	RTL_VER_02 | 
 | }; | 
 |  | 
 | /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). | 
 |  * The RTL chips use a 64 element hash table based on the Ethernet CRC. | 
 |  */ | 
 | static const int multicast_filter_limit = 32; | 
 |  | 
 | static | 
 | int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) | 
 | { | 
 | 	return usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0), | 
 | 			       RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, | 
 | 			       value, index, data, size, 500); | 
 | } | 
 |  | 
 | static | 
 | int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) | 
 | { | 
 | 	return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0), | 
 | 			       RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, | 
 | 			       value, index, data, size, 500); | 
 | } | 
 |  | 
 | static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, | 
 | 				void *data, u16 type) | 
 | { | 
 | 	u16	limit = 64; | 
 | 	int	ret = 0; | 
 |  | 
 | 	if (test_bit(RTL8152_UNPLUG, &tp->flags)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* both size and indix must be 4 bytes align */ | 
 | 	if ((size & 3) || !size || (index & 3) || !data) | 
 | 		return -EPERM; | 
 |  | 
 | 	if ((u32)index + (u32)size > 0xffff) | 
 | 		return -EPERM; | 
 |  | 
 | 	while (size) { | 
 | 		if (size > limit) { | 
 | 			ret = get_registers(tp, index, type, limit, data); | 
 | 			if (ret < 0) | 
 | 				break; | 
 |  | 
 | 			index += limit; | 
 | 			data += limit; | 
 | 			size -= limit; | 
 | 		} else { | 
 | 			ret = get_registers(tp, index, type, size, data); | 
 | 			if (ret < 0) | 
 | 				break; | 
 |  | 
 | 			index += size; | 
 | 			data += size; | 
 | 			size = 0; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, | 
 | 				u16 size, void *data, u16 type) | 
 | { | 
 | 	int	ret; | 
 | 	u16	byteen_start, byteen_end, byen; | 
 | 	u16	limit = 512; | 
 |  | 
 | 	if (test_bit(RTL8152_UNPLUG, &tp->flags)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* both size and indix must be 4 bytes align */ | 
 | 	if ((size & 3) || !size || (index & 3) || !data) | 
 | 		return -EPERM; | 
 |  | 
 | 	if ((u32)index + (u32)size > 0xffff) | 
 | 		return -EPERM; | 
 |  | 
 | 	byteen_start = byteen & BYTE_EN_START_MASK; | 
 | 	byteen_end = byteen & BYTE_EN_END_MASK; | 
 |  | 
 | 	byen = byteen_start | (byteen_start << 4); | 
 | 	ret = set_registers(tp, index, type | byen, 4, data); | 
 | 	if (ret < 0) | 
 | 		goto error1; | 
 |  | 
 | 	index += 4; | 
 | 	data += 4; | 
 | 	size -= 4; | 
 |  | 
 | 	if (size) { | 
 | 		size -= 4; | 
 |  | 
 | 		while (size) { | 
 | 			if (size > limit) { | 
 | 				ret = set_registers(tp, index, | 
 | 					type | BYTE_EN_DWORD, | 
 | 					limit, data); | 
 | 				if (ret < 0) | 
 | 					goto error1; | 
 |  | 
 | 				index += limit; | 
 | 				data += limit; | 
 | 				size -= limit; | 
 | 			} else { | 
 | 				ret = set_registers(tp, index, | 
 | 					type | BYTE_EN_DWORD, | 
 | 					size, data); | 
 | 				if (ret < 0) | 
 | 					goto error1; | 
 |  | 
 | 				index += size; | 
 | 				data += size; | 
 | 				size = 0; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		byen = byteen_end | (byteen_end >> 4); | 
 | 		ret = set_registers(tp, index, type | byen, 4, data); | 
 | 		if (ret < 0) | 
 | 			goto error1; | 
 | 	} | 
 |  | 
 | error1: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline | 
 | int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) | 
 | { | 
 | 	return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA); | 
 | } | 
 |  | 
 | static inline | 
 | int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) | 
 | { | 
 | 	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA); | 
 | } | 
 |  | 
 | static inline | 
 | int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) | 
 | { | 
 | 	return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB); | 
 | } | 
 |  | 
 | static inline | 
 | int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) | 
 | { | 
 | 	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB); | 
 | } | 
 |  | 
 | static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index) | 
 | { | 
 | 	u32 data; | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_read(tp, index, sizeof(data), &data); | 
 | 	else | 
 | 		usb_ocp_read(tp, index, sizeof(data), &data); | 
 |  | 
 | 	return __le32_to_cpu(data); | 
 | } | 
 |  | 
 | static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data) | 
 | { | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data); | 
 | 	else | 
 | 		usb_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data); | 
 | } | 
 |  | 
 | static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) | 
 | { | 
 | 	u32 data; | 
 | 	u8 shift = index & 2; | 
 |  | 
 | 	index &= ~3; | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_read(tp, index, sizeof(data), &data); | 
 | 	else | 
 | 		usb_ocp_read(tp, index, sizeof(data), &data); | 
 |  | 
 | 	data = __le32_to_cpu(data); | 
 | 	data >>= (shift * 8); | 
 | 	data &= 0xffff; | 
 |  | 
 | 	return (u16)data; | 
 | } | 
 |  | 
 | static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data) | 
 | { | 
 | 	u32 tmp, mask = 0xffff; | 
 | 	u16 byen = BYTE_EN_WORD; | 
 | 	u8 shift = index & 2; | 
 |  | 
 | 	data &= mask; | 
 |  | 
 | 	if (index & 2) { | 
 | 		byen <<= shift; | 
 | 		mask <<= (shift * 8); | 
 | 		data <<= (shift * 8); | 
 | 		index &= ~3; | 
 | 	} | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_read(tp, index, sizeof(tmp), &tmp); | 
 | 	else | 
 | 		usb_ocp_read(tp, index, sizeof(tmp), &tmp); | 
 |  | 
 | 	tmp = __le32_to_cpu(tmp) & ~mask; | 
 | 	tmp |= data; | 
 | 	tmp = __cpu_to_le32(tmp); | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp); | 
 | 	else | 
 | 		usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp); | 
 | } | 
 |  | 
 | static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index) | 
 | { | 
 | 	u32 data; | 
 | 	u8 shift = index & 3; | 
 |  | 
 | 	index &= ~3; | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_read(tp, index, sizeof(data), &data); | 
 | 	else | 
 | 		usb_ocp_read(tp, index, sizeof(data), &data); | 
 |  | 
 | 	data = __le32_to_cpu(data); | 
 | 	data >>= (shift * 8); | 
 | 	data &= 0xff; | 
 |  | 
 | 	return (u8)data; | 
 | } | 
 |  | 
 | static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) | 
 | { | 
 | 	u32 tmp, mask = 0xff; | 
 | 	u16 byen = BYTE_EN_BYTE; | 
 | 	u8 shift = index & 3; | 
 |  | 
 | 	data &= mask; | 
 |  | 
 | 	if (index & 3) { | 
 | 		byen <<= shift; | 
 | 		mask <<= (shift * 8); | 
 | 		data <<= (shift * 8); | 
 | 		index &= ~3; | 
 | 	} | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_read(tp, index, sizeof(tmp), &tmp); | 
 | 	else | 
 | 		usb_ocp_read(tp, index, sizeof(tmp), &tmp); | 
 |  | 
 | 	tmp = __le32_to_cpu(tmp) & ~mask; | 
 | 	tmp |= data; | 
 | 	tmp = __cpu_to_le32(tmp); | 
 |  | 
 | 	if (type == MCU_TYPE_PLA) | 
 | 		pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp); | 
 | 	else | 
 | 		usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp); | 
 | } | 
 |  | 
 | static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	int	i; | 
 |  | 
 | 	ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) | | 
 | 		   (value & 0xffff); | 
 |  | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); | 
 |  | 
 | 	for (i = 20; i > 0; i--) { | 
 | 		udelay(25); | 
 | 		ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); | 
 | 		if (!(ocp_data & PHYAR_FLAG)) | 
 | 			break; | 
 | 	} | 
 | 	udelay(20); | 
 | } | 
 |  | 
 | static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	int	i; | 
 |  | 
 | 	ocp_data = (reg_addr & 0x1f) << 16; | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); | 
 |  | 
 | 	for (i = 20; i > 0; i--) { | 
 | 		udelay(25); | 
 | 		ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); | 
 | 		if (ocp_data & PHYAR_FLAG) | 
 | 			break; | 
 | 	} | 
 | 	udelay(20); | 
 |  | 
 | 	if (!(ocp_data & PHYAR_FLAG)) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	return (u16)(ocp_data & 0xffff); | 
 | } | 
 |  | 
 | static int read_mii_word(struct net_device *netdev, int phy_id, int reg) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 |  | 
 | 	if (phy_id != R8152_PHY_ID) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return r8152_mdio_read(tp, reg); | 
 | } | 
 |  | 
 | static | 
 | void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 |  | 
 | 	if (phy_id != R8152_PHY_ID) | 
 | 		return; | 
 |  | 
 | 	r8152_mdio_write(tp, reg, val); | 
 | } | 
 |  | 
 | static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) | 
 | { | 
 | 	u16 ocp_base, ocp_index; | 
 |  | 
 | 	ocp_base = addr & 0xf000; | 
 | 	if (ocp_base != tp->ocp_base) { | 
 | 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); | 
 | 		tp->ocp_base = ocp_base; | 
 | 	} | 
 |  | 
 | 	ocp_index = (addr & 0x0fff) | 0xb000; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data); | 
 | } | 
 |  | 
 | static inline void set_ethernet_addr(struct r8152 *tp) | 
 | { | 
 | 	struct net_device *dev = tp->netdev; | 
 | 	u8 *node_id; | 
 |  | 
 | 	node_id = kmalloc(sizeof(u8) * 8, GFP_KERNEL); | 
 | 	if (!node_id) { | 
 | 		netif_err(tp, probe, dev, "out of memory"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (pla_ocp_read(tp, PLA_IDR, sizeof(u8) * 8, node_id) < 0) | 
 | 		netif_notice(tp, probe, dev, "inet addr fail\n"); | 
 | 	else { | 
 | 		memcpy(dev->dev_addr, node_id, dev->addr_len); | 
 | 		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); | 
 | 	} | 
 | 	kfree(node_id); | 
 | } | 
 |  | 
 | static int rtl8152_set_mac_address(struct net_device *netdev, void *p) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	struct sockaddr *addr = p; | 
 |  | 
 | 	if (!is_valid_ether_addr(addr->sa_data)) | 
 | 		return -EADDRNOTAVAIL; | 
 |  | 
 | 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
 |  | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); | 
 | 	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data); | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int alloc_all_urbs(struct r8152 *tp) | 
 | { | 
 | 	tp->rx_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!tp->rx_urb) | 
 | 		return 0; | 
 | 	tp->tx_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!tp->tx_urb) { | 
 | 		usb_free_urb(tp->rx_urb); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static void free_all_urbs(struct r8152 *tp) | 
 | { | 
 | 	usb_free_urb(tp->rx_urb); | 
 | 	usb_free_urb(tp->tx_urb); | 
 | } | 
 |  | 
 | static struct net_device_stats *rtl8152_get_stats(struct net_device *dev) | 
 | { | 
 | 	return &dev->stats; | 
 | } | 
 |  | 
 | static void read_bulk_callback(struct urb *urb) | 
 | { | 
 | 	struct r8152 *tp; | 
 | 	unsigned pkt_len; | 
 | 	struct sk_buff *skb; | 
 | 	struct net_device *netdev; | 
 | 	struct net_device_stats *stats; | 
 | 	int status = urb->status; | 
 | 	int result; | 
 | 	struct rx_desc *rx_desc; | 
 |  | 
 | 	tp = urb->context; | 
 | 	if (!tp) | 
 | 		return; | 
 | 	if (test_bit(RTL8152_UNPLUG, &tp->flags)) | 
 | 		return; | 
 | 	netdev = tp->netdev; | 
 | 	if (!netif_device_present(netdev)) | 
 | 		return; | 
 |  | 
 | 	stats = rtl8152_get_stats(netdev); | 
 | 	switch (status) { | 
 | 	case 0: | 
 | 		break; | 
 | 	case -ESHUTDOWN: | 
 | 		set_bit(RTL8152_UNPLUG, &tp->flags); | 
 | 		netif_device_detach(tp->netdev); | 
 | 	case -ENOENT: | 
 | 		return;	/* the urb is in unlink state */ | 
 | 	case -ETIME: | 
 | 		pr_warn_ratelimited("may be reset is needed?..\n"); | 
 | 		goto goon; | 
 | 	default: | 
 | 		pr_warn_ratelimited("Rx status %d\n", status); | 
 | 		goto goon; | 
 | 	} | 
 |  | 
 | 	/* protect against short packets (tell me why we got some?!?) */ | 
 | 	if (urb->actual_length < sizeof(*rx_desc)) | 
 | 		goto goon; | 
 |  | 
 |  | 
 | 	rx_desc = (struct rx_desc *)urb->transfer_buffer; | 
 | 	pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK; | 
 | 	if (urb->actual_length < sizeof(struct rx_desc) + pkt_len) | 
 | 		goto goon; | 
 |  | 
 | 	skb = netdev_alloc_skb_ip_align(netdev, pkt_len); | 
 | 	if (!skb) | 
 | 		goto goon; | 
 |  | 
 | 	memcpy(skb->data, tp->rx_skb->data + sizeof(struct rx_desc), pkt_len); | 
 | 	skb_put(skb, pkt_len); | 
 | 	skb->protocol = eth_type_trans(skb, netdev); | 
 | 	netif_rx(skb); | 
 | 	stats->rx_packets++; | 
 | 	stats->rx_bytes += pkt_len; | 
 | goon: | 
 | 	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1), | 
 | 		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc), | 
 | 		      (usb_complete_t)read_bulk_callback, tp); | 
 | 	result = usb_submit_urb(tp->rx_urb, GFP_ATOMIC); | 
 | 	if (result == -ENODEV) { | 
 | 		netif_device_detach(tp->netdev); | 
 | 	} else if (result) { | 
 | 		set_bit(RX_URB_FAIL, &tp->flags); | 
 | 		goto resched; | 
 | 	} else { | 
 | 		clear_bit(RX_URB_FAIL, &tp->flags); | 
 | 	} | 
 |  | 
 | 	return; | 
 | resched: | 
 | 	tasklet_schedule(&tp->tl); | 
 | } | 
 |  | 
 | static void rx_fixup(unsigned long data) | 
 | { | 
 | 	struct r8152 *tp; | 
 | 	int status; | 
 |  | 
 | 	tp = (struct r8152 *)data; | 
 | 	if (!test_bit(WORK_ENABLE, &tp->flags)) | 
 | 		return; | 
 |  | 
 | 	status = usb_submit_urb(tp->rx_urb, GFP_ATOMIC); | 
 | 	if (status == -ENODEV) { | 
 | 		netif_device_detach(tp->netdev); | 
 | 	} else if (status) { | 
 | 		set_bit(RX_URB_FAIL, &tp->flags); | 
 | 		goto tlsched; | 
 | 	} else { | 
 | 		clear_bit(RX_URB_FAIL, &tp->flags); | 
 | 	} | 
 |  | 
 | 	return; | 
 | tlsched: | 
 | 	tasklet_schedule(&tp->tl); | 
 | } | 
 |  | 
 | static void write_bulk_callback(struct urb *urb) | 
 | { | 
 | 	struct r8152 *tp; | 
 | 	int status = urb->status; | 
 |  | 
 | 	tp = urb->context; | 
 | 	if (!tp) | 
 | 		return; | 
 | 	dev_kfree_skb_irq(tp->tx_skb); | 
 | 	if (!netif_device_present(tp->netdev)) | 
 | 		return; | 
 | 	if (status) | 
 | 		dev_info(&urb->dev->dev, "%s: Tx status %d\n", | 
 | 			 tp->netdev->name, status); | 
 | 	tp->netdev->trans_start = jiffies; | 
 | 	netif_wake_queue(tp->netdev); | 
 | } | 
 |  | 
 | static void rtl8152_tx_timeout(struct net_device *netdev) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	struct net_device_stats *stats = rtl8152_get_stats(netdev); | 
 | 	netif_warn(tp, tx_err, netdev, "Tx timeout.\n"); | 
 | 	usb_unlink_urb(tp->tx_urb); | 
 | 	stats->tx_errors++; | 
 | } | 
 |  | 
 | static void rtl8152_set_rx_mode(struct net_device *netdev) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 |  | 
 | 	if (tp->speed & LINK_STATUS) | 
 | 		set_bit(RTL8152_SET_RX_MODE, &tp->flags); | 
 | } | 
 |  | 
 | static void _rtl8152_set_rx_mode(struct net_device *netdev) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	u32 tmp, *mc_filter;	/* Multicast hash filter */ | 
 | 	u32 ocp_data; | 
 |  | 
 | 	mc_filter = kmalloc(sizeof(u32) * 2, GFP_KERNEL); | 
 | 	if (!mc_filter) { | 
 | 		netif_err(tp, link, netdev, "out of memory"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	clear_bit(RTL8152_SET_RX_MODE, &tp->flags); | 
 | 	netif_stop_queue(netdev); | 
 | 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | 
 | 	ocp_data &= ~RCR_ACPT_ALL; | 
 | 	ocp_data |= RCR_AB | RCR_APM; | 
 |  | 
 | 	if (netdev->flags & IFF_PROMISC) { | 
 | 		/* Unconditionally log net taps. */ | 
 | 		netif_notice(tp, link, netdev, "Promiscuous mode enabled\n"); | 
 | 		ocp_data |= RCR_AM | RCR_AAP; | 
 | 		mc_filter[1] = mc_filter[0] = 0xffffffff; | 
 | 	} else if ((netdev_mc_count(netdev) > multicast_filter_limit) || | 
 | 		   (netdev->flags & IFF_ALLMULTI)) { | 
 | 		/* Too many to filter perfectly -- accept all multicasts. */ | 
 | 		ocp_data |= RCR_AM; | 
 | 		mc_filter[1] = mc_filter[0] = 0xffffffff; | 
 | 	} else { | 
 | 		struct netdev_hw_addr *ha; | 
 |  | 
 | 		mc_filter[1] = mc_filter[0] = 0; | 
 | 		netdev_for_each_mc_addr(ha, netdev) { | 
 | 			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; | 
 | 			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); | 
 | 			ocp_data |= RCR_AM; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	tmp = mc_filter[0]; | 
 | 	mc_filter[0] = __cpu_to_le32(swab32(mc_filter[1])); | 
 | 	mc_filter[1] = __cpu_to_le32(swab32(tmp)); | 
 |  | 
 | 	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(u32) * 2, mc_filter); | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | 
 | 	netif_wake_queue(netdev); | 
 | 	kfree(mc_filter); | 
 | } | 
 |  | 
 | static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb, | 
 | 					    struct net_device *netdev) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	struct net_device_stats *stats = rtl8152_get_stats(netdev); | 
 | 	struct tx_desc *tx_desc; | 
 | 	int len, res; | 
 |  | 
 | 	netif_stop_queue(netdev); | 
 | 	len = skb->len; | 
 | 	if (skb_header_cloned(skb) || skb_headroom(skb) < sizeof(*tx_desc)) { | 
 | 		struct sk_buff *tx_skb; | 
 |  | 
 | 		tx_skb = skb_copy_expand(skb, sizeof(*tx_desc), 0, GFP_ATOMIC); | 
 | 		dev_kfree_skb_any(skb); | 
 | 		if (!tx_skb) { | 
 | 			stats->tx_dropped++; | 
 | 			netif_wake_queue(netdev); | 
 | 			return NETDEV_TX_OK; | 
 | 		} | 
 | 		skb = tx_skb; | 
 | 	} | 
 | 	tx_desc = (struct tx_desc *)skb_push(skb, sizeof(*tx_desc)); | 
 | 	memset(tx_desc, 0, sizeof(*tx_desc)); | 
 | 	tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS); | 
 | 	tp->tx_skb = skb; | 
 | 	skb_tx_timestamp(skb); | 
 | 	usb_fill_bulk_urb(tp->tx_urb, tp->udev, usb_sndbulkpipe(tp->udev, 2), | 
 | 			  skb->data, skb->len, | 
 | 			  (usb_complete_t)write_bulk_callback, tp); | 
 | 	res = usb_submit_urb(tp->tx_urb, GFP_ATOMIC); | 
 | 	if (res) { | 
 | 		/* Can we get/handle EPIPE here? */ | 
 | 		if (res == -ENODEV) { | 
 | 			netif_device_detach(tp->netdev); | 
 | 		} else { | 
 | 			netif_warn(tp, tx_err, netdev, | 
 | 				   "failed tx_urb %d\n", res); | 
 | 			stats->tx_errors++; | 
 | 			netif_start_queue(netdev); | 
 | 		} | 
 | 	} else { | 
 | 		stats->tx_packets++; | 
 | 		stats->tx_bytes += skb->len; | 
 | 	} | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 | } | 
 |  | 
 | static void r8152b_reset_packet_filter(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC); | 
 | 	ocp_data &= ~FMC_FCR_MCU_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); | 
 | 	ocp_data |= FMC_FCR_MCU_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); | 
 | } | 
 |  | 
 | static void rtl8152_nic_reset(struct r8152 *tp) | 
 | { | 
 | 	int	i; | 
 |  | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) | 
 | 			break; | 
 | 		udelay(100); | 
 | 	} | 
 | } | 
 |  | 
 | static inline u8 rtl8152_get_speed(struct r8152 *tp) | 
 | { | 
 | 	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); | 
 | } | 
 |  | 
 | static int rtl8152_enable(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	u8 speed; | 
 |  | 
 | 	speed = rtl8152_get_speed(tp); | 
 | 	if (speed & _100bps) { | 
 | 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); | 
 | 		ocp_data &= ~EEEP_CR_EEEP_TX; | 
 | 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); | 
 | 	} else { | 
 | 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); | 
 | 		ocp_data |= EEEP_CR_EEEP_TX; | 
 | 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); | 
 | 	} | 
 |  | 
 | 	r8152b_reset_packet_filter(tp); | 
 |  | 
 | 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); | 
 | 	ocp_data |= CR_RE | CR_TE; | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | 
 | 	ocp_data &= ~RXDY_GATED_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | 
 |  | 
 | 	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1), | 
 | 		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc), | 
 | 		      (usb_complete_t)read_bulk_callback, tp); | 
 |  | 
 | 	return usb_submit_urb(tp->rx_urb, GFP_KERNEL); | 
 | } | 
 |  | 
 | static void rtl8152_disable(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	int	i; | 
 |  | 
 | 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | 
 | 	ocp_data &= ~RCR_ACPT_ALL; | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | 
 |  | 
 | 	usb_kill_urb(tp->tx_urb); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | 
 | 	ocp_data |= RXDY_GATED_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY) | 
 | 			break; | 
 | 		mdelay(1); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY) | 
 | 			break; | 
 | 		mdelay(1); | 
 | 	} | 
 |  | 
 | 	usb_kill_urb(tp->rx_urb); | 
 |  | 
 | 	rtl8152_nic_reset(tp); | 
 | } | 
 |  | 
 | static void r8152b_exit_oob(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	int	i; | 
 |  | 
 | 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | 
 | 	ocp_data &= ~RCR_ACPT_ALL; | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | 
 | 	ocp_data |= RXDY_GATED_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | 
 |  | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00); | 
 |  | 
 | 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 	ocp_data &= ~NOW_IS_OOB; | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); | 
 | 	ocp_data &= ~MCU_BORW_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 		if (ocp_data & LINK_LIST_READY) | 
 | 			break; | 
 | 		mdelay(1); | 
 | 	} | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); | 
 | 	ocp_data |= RE_INIT_LL; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 		if (ocp_data & LINK_LIST_READY) | 
 | 			break; | 
 | 		mdelay(1); | 
 | 	} | 
 |  | 
 | 	rtl8152_nic_reset(tp); | 
 |  | 
 | 	/* rx share fifo credit full threshold */ | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT); | 
 | 	ocp_data &= STAT_SPEED_MASK; | 
 | 	if (ocp_data == STAT_SPEED_FULL) { | 
 | 		/* rx share fifo credit near full threshold */ | 
 | 		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, | 
 | 				RXFIFO_THR2_FULL); | 
 | 		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, | 
 | 				RXFIFO_THR3_FULL); | 
 | 	} else { | 
 | 		/* rx share fifo credit near full threshold */ | 
 | 		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, | 
 | 				RXFIFO_THR2_HIGH); | 
 | 		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, | 
 | 				RXFIFO_THR3_HIGH); | 
 | 	} | 
 |  | 
 | 	/* TX share fifo free credit full threshold */ | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); | 
 |  | 
 | 	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); | 
 | 	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR); | 
 | 	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA, | 
 | 			TEST_MODE_DISABLE | TX_SIZE_ADJUST1); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); | 
 | 	ocp_data &= ~CPCR_RX_VLAN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); | 
 |  | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); | 
 | 	ocp_data |= TCR0_AUTO_FIFO; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); | 
 | } | 
 |  | 
 | static void r8152b_enter_oob(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	int	i; | 
 |  | 
 | 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 	ocp_data &= ~NOW_IS_OOB; | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); | 
 |  | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB); | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB); | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB); | 
 |  | 
 | 	rtl8152_disable(tp); | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 		if (ocp_data & LINK_LIST_READY) | 
 | 			break; | 
 | 		mdelay(1); | 
 | 	} | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); | 
 | 	ocp_data |= RE_INIT_LL; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); | 
 |  | 
 | 	for (i = 0; i < 1000; i++) { | 
 | 		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 		if (ocp_data & LINK_LIST_READY) | 
 | 			break; | 
 | 		mdelay(1); | 
 | 	} | 
 |  | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL); | 
 | 	ocp_data |= MAGIC_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); | 
 | 	ocp_data |= CPCR_RX_VLAN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); | 
 | 	ocp_data |= ALDPS_PROXY_MODE; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | 
 | 	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); | 
 |  | 
 | 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | 
 | 	ocp_data &= ~RXDY_GATED_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | 
 | 	ocp_data |= RCR_APM | RCR_AM | RCR_AB; | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | 
 | } | 
 |  | 
 | static void r8152b_disable_aldps(struct r8152 *tp) | 
 | { | 
 | 	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE); | 
 | 	msleep(20); | 
 | } | 
 |  | 
 | static inline void r8152b_enable_aldps(struct r8152 *tp) | 
 | { | 
 | 	ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS | | 
 | 					    LINKENA | DIS_SDSAVE); | 
 | } | 
 |  | 
 | static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) | 
 | { | 
 | 	u16 bmcr, anar; | 
 | 	int ret = 0; | 
 |  | 
 | 	cancel_delayed_work_sync(&tp->schedule); | 
 | 	anar = r8152_mdio_read(tp, MII_ADVERTISE); | 
 | 	anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | | 
 | 		  ADVERTISE_100HALF | ADVERTISE_100FULL); | 
 |  | 
 | 	if (autoneg == AUTONEG_DISABLE) { | 
 | 		if (speed == SPEED_10) { | 
 | 			bmcr = 0; | 
 | 			anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; | 
 | 		} else if (speed == SPEED_100) { | 
 | 			bmcr = BMCR_SPEED100; | 
 | 			anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; | 
 | 		} else { | 
 | 			ret = -EINVAL; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (duplex == DUPLEX_FULL) | 
 | 			bmcr |= BMCR_FULLDPLX; | 
 | 	} else { | 
 | 		if (speed == SPEED_10) { | 
 | 			if (duplex == DUPLEX_FULL) | 
 | 				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; | 
 | 			else | 
 | 				anar |= ADVERTISE_10HALF; | 
 | 		} else if (speed == SPEED_100) { | 
 | 			if (duplex == DUPLEX_FULL) { | 
 | 				anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; | 
 | 				anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; | 
 | 			} else { | 
 | 				anar |= ADVERTISE_10HALF; | 
 | 				anar |= ADVERTISE_100HALF; | 
 | 			} | 
 | 		} else { | 
 | 			ret = -EINVAL; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		bmcr = BMCR_ANENABLE | BMCR_ANRESTART; | 
 | 	} | 
 |  | 
 | 	r8152_mdio_write(tp, MII_ADVERTISE, anar); | 
 | 	r8152_mdio_write(tp, MII_BMCR, bmcr); | 
 |  | 
 | out: | 
 | 	schedule_delayed_work(&tp->schedule, 5 * HZ); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void rtl8152_down(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); | 
 | 	ocp_data &= ~POWER_CUT; | 
 | 	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); | 
 |  | 
 | 	r8152b_disable_aldps(tp); | 
 | 	r8152b_enter_oob(tp); | 
 | 	r8152b_enable_aldps(tp); | 
 | } | 
 |  | 
 | static void set_carrier(struct r8152 *tp) | 
 | { | 
 | 	struct net_device *netdev = tp->netdev; | 
 | 	u8 speed; | 
 |  | 
 | 	speed = rtl8152_get_speed(tp); | 
 |  | 
 | 	if (speed & LINK_STATUS) { | 
 | 		if (!(tp->speed & LINK_STATUS)) { | 
 | 			rtl8152_enable(tp); | 
 | 			set_bit(RTL8152_SET_RX_MODE, &tp->flags); | 
 | 			netif_carrier_on(netdev); | 
 | 		} | 
 | 	} else { | 
 | 		if (tp->speed & LINK_STATUS) { | 
 | 			netif_carrier_off(netdev); | 
 | 			rtl8152_disable(tp); | 
 | 		} | 
 | 	} | 
 | 	tp->speed = speed; | 
 | } | 
 |  | 
 | static void rtl_work_func_t(struct work_struct *work) | 
 | { | 
 | 	struct r8152 *tp = container_of(work, struct r8152, schedule.work); | 
 |  | 
 | 	if (!test_bit(WORK_ENABLE, &tp->flags)) | 
 | 		goto out1; | 
 |  | 
 | 	if (test_bit(RTL8152_UNPLUG, &tp->flags)) | 
 | 		goto out1; | 
 |  | 
 | 	set_carrier(tp); | 
 |  | 
 | 	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags)) | 
 | 		_rtl8152_set_rx_mode(tp->netdev); | 
 |  | 
 | 	schedule_delayed_work(&tp->schedule, HZ); | 
 |  | 
 | out1: | 
 | 	return; | 
 | } | 
 |  | 
 | static int rtl8152_open(struct net_device *netdev) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	int res = 0; | 
 |  | 
 | 	tp->speed = rtl8152_get_speed(tp); | 
 | 	if (tp->speed & LINK_STATUS) { | 
 | 		res = rtl8152_enable(tp); | 
 | 		if (res) { | 
 | 			if (res == -ENODEV) | 
 | 				netif_device_detach(tp->netdev); | 
 |  | 
 | 			netif_err(tp, ifup, netdev, | 
 | 				  "rtl8152_open failed: %d\n", res); | 
 | 			return res; | 
 | 		} | 
 |  | 
 | 		netif_carrier_on(netdev); | 
 | 	} else { | 
 | 		netif_stop_queue(netdev); | 
 | 		netif_carrier_off(netdev); | 
 | 	} | 
 |  | 
 | 	rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); | 
 | 	netif_start_queue(netdev); | 
 | 	set_bit(WORK_ENABLE, &tp->flags); | 
 | 	schedule_delayed_work(&tp->schedule, 0); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | static int rtl8152_close(struct net_device *netdev) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	int res = 0; | 
 |  | 
 | 	clear_bit(WORK_ENABLE, &tp->flags); | 
 | 	cancel_delayed_work_sync(&tp->schedule); | 
 | 	netif_stop_queue(netdev); | 
 | 	rtl8152_disable(tp); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | static void rtl_clear_bp(struct r8152 *tp) | 
 | { | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0); | 
 | 	ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0); | 
 | 	mdelay(3); | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0); | 
 | 	ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0); | 
 | } | 
 |  | 
 | static void r8152b_enable_eee(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); | 
 | 	ocp_data |= EEE_RX_EN | EEE_TX_EN; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); | 
 | 	ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN | | 
 | 					   EEE_10_CAP | EEE_NWAY_EN | | 
 | 					   TX_QUIET_EN | RX_QUIET_EN | | 
 | 					   SDRISETIME | RG_RXLPI_MSK_HFDUP | | 
 | 					   SDFALLTIME); | 
 | 	ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN | | 
 | 					   RG_LDVQUIET_EN | RG_CKRSEL | | 
 | 					   RG_EEEPRG_EN); | 
 | 	ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH); | 
 | 	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR); | 
 | 	ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR); | 
 | 	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR); | 
 | 	ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA); | 
 | 	ocp_reg_write(tp, OCP_EEE_AR, 0x0000); | 
 | } | 
 |  | 
 | static void r8152b_enable_fc(struct r8152 *tp) | 
 | { | 
 | 	u16 anar; | 
 |  | 
 | 	anar = r8152_mdio_read(tp, MII_ADVERTISE); | 
 | 	anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; | 
 | 	r8152_mdio_write(tp, MII_ADVERTISE, anar); | 
 | } | 
 |  | 
 | static void r8152b_hw_phy_cfg(struct r8152 *tp) | 
 | { | 
 | 	r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE); | 
 | 	r8152b_disable_aldps(tp); | 
 | } | 
 |  | 
 | static void r8152b_init(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	int	i; | 
 |  | 
 | 	rtl_clear_bp(tp); | 
 |  | 
 | 	if (tp->version == RTL_VER_01) { | 
 | 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); | 
 | 		ocp_data &= ~LED_MODE_MASK; | 
 | 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); | 
 | 	} | 
 |  | 
 | 	r8152b_hw_phy_cfg(tp); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); | 
 | 	ocp_data &= ~POWER_CUT; | 
 | 	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); | 
 | 	ocp_data &= ~RWSUME_INDICATE; | 
 | 	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); | 
 |  | 
 | 	r8152b_exit_oob(tp); | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); | 
 | 	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); | 
 | 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL); | 
 | 	ocp_data &= ~MCU_CLK_RATIO_MASK; | 
 | 	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN; | 
 | 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data); | 
 | 	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK | | 
 | 		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK; | 
 | 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data); | 
 |  | 
 | 	r8152b_enable_eee(tp); | 
 | 	r8152b_enable_aldps(tp); | 
 | 	r8152b_enable_fc(tp); | 
 |  | 
 | 	r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | | 
 | 				       BMCR_ANRESTART); | 
 | 	for (i = 0; i < 100; i++) { | 
 | 		udelay(100); | 
 | 		if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET)) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	/* disable rx aggregation */ | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); | 
 | 	ocp_data |= RX_AGG_DISABLE; | 
 | 	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); | 
 | } | 
 |  | 
 | static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) | 
 | { | 
 | 	struct r8152 *tp = usb_get_intfdata(intf); | 
 |  | 
 | 	netif_device_detach(tp->netdev); | 
 |  | 
 | 	if (netif_running(tp->netdev)) { | 
 | 		clear_bit(WORK_ENABLE, &tp->flags); | 
 | 		cancel_delayed_work_sync(&tp->schedule); | 
 | 	} | 
 |  | 
 | 	rtl8152_down(tp); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int rtl8152_resume(struct usb_interface *intf) | 
 | { | 
 | 	struct r8152 *tp = usb_get_intfdata(intf); | 
 |  | 
 | 	r8152b_init(tp); | 
 | 	netif_device_attach(tp->netdev); | 
 | 	if (netif_running(tp->netdev)) { | 
 | 		rtl8152_enable(tp); | 
 | 		set_bit(WORK_ENABLE, &tp->flags); | 
 | 		set_bit(RTL8152_SET_RX_MODE, &tp->flags); | 
 | 		schedule_delayed_work(&tp->schedule, 0); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void rtl8152_get_drvinfo(struct net_device *netdev, | 
 | 				struct ethtool_drvinfo *info) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 |  | 
 | 	strncpy(info->driver, MODULENAME, ETHTOOL_BUSINFO_LEN); | 
 | 	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); | 
 | 	usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info)); | 
 | } | 
 |  | 
 | static | 
 | int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 |  | 
 | 	if (!tp->mii.mdio_read) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	return mii_ethtool_gset(&tp->mii, cmd); | 
 | } | 
 |  | 
 | static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(dev); | 
 |  | 
 | 	return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex); | 
 | } | 
 |  | 
 | static struct ethtool_ops ops = { | 
 | 	.get_drvinfo = rtl8152_get_drvinfo, | 
 | 	.get_settings = rtl8152_get_settings, | 
 | 	.set_settings = rtl8152_set_settings, | 
 | 	.get_link = ethtool_op_get_link, | 
 | }; | 
 |  | 
 | static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | 
 | { | 
 | 	struct r8152 *tp = netdev_priv(netdev); | 
 | 	struct mii_ioctl_data *data = if_mii(rq); | 
 | 	int res = 0; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case SIOCGMIIPHY: | 
 | 		data->phy_id = R8152_PHY_ID; /* Internal PHY */ | 
 | 		break; | 
 |  | 
 | 	case SIOCGMIIREG: | 
 | 		data->val_out = r8152_mdio_read(tp, data->reg_num); | 
 | 		break; | 
 |  | 
 | 	case SIOCSMIIREG: | 
 | 		if (!capable(CAP_NET_ADMIN)) { | 
 | 			res = -EPERM; | 
 | 			break; | 
 | 		} | 
 | 		r8152_mdio_write(tp, data->reg_num, data->val_in); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		res = -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | static const struct net_device_ops rtl8152_netdev_ops = { | 
 | 	.ndo_open		= rtl8152_open, | 
 | 	.ndo_stop		= rtl8152_close, | 
 | 	.ndo_do_ioctl		= rtl8152_ioctl, | 
 | 	.ndo_start_xmit		= rtl8152_start_xmit, | 
 | 	.ndo_tx_timeout		= rtl8152_tx_timeout, | 
 | 	.ndo_set_rx_mode	= rtl8152_set_rx_mode, | 
 | 	.ndo_set_mac_address	= rtl8152_set_mac_address, | 
 |  | 
 | 	.ndo_change_mtu		= eth_change_mtu, | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | }; | 
 |  | 
 | static void r8152b_get_version(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 | 	u16	version; | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1); | 
 | 	version = (u16)(ocp_data & VERSION_MASK); | 
 |  | 
 | 	switch (version) { | 
 | 	case 0x4c00: | 
 | 		tp->version = RTL_VER_01; | 
 | 		break; | 
 | 	case 0x4c10: | 
 | 		tp->version = RTL_VER_02; | 
 | 		break; | 
 | 	default: | 
 | 		netif_info(tp, probe, tp->netdev, | 
 | 			   "Unknown version 0x%04x\n", version); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static int rtl8152_probe(struct usb_interface *intf, | 
 | 			 const struct usb_device_id *id) | 
 | { | 
 | 	struct usb_device *udev = interface_to_usbdev(intf); | 
 | 	struct r8152 *tp; | 
 | 	struct net_device *netdev; | 
 |  | 
 | 	if (udev->actconfig->desc.bConfigurationValue != 1) { | 
 | 		usb_driver_set_configuration(udev, 1); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	netdev = alloc_etherdev(sizeof(struct r8152)); | 
 | 	if (!netdev) { | 
 | 		dev_err(&intf->dev, "Out of memory"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	tp = netdev_priv(netdev); | 
 | 	tp->msg_enable = 0x7FFF; | 
 |  | 
 | 	tasklet_init(&tp->tl, rx_fixup, (unsigned long)tp); | 
 | 	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); | 
 |  | 
 | 	tp->udev = udev; | 
 | 	tp->netdev = netdev; | 
 | 	netdev->netdev_ops = &rtl8152_netdev_ops; | 
 | 	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT; | 
 | 	netdev->features &= ~NETIF_F_IP_CSUM; | 
 | 	SET_ETHTOOL_OPS(netdev, &ops); | 
 | 	tp->speed = 0; | 
 |  | 
 | 	tp->mii.dev = netdev; | 
 | 	tp->mii.mdio_read = read_mii_word; | 
 | 	tp->mii.mdio_write = write_mii_word; | 
 | 	tp->mii.phy_id_mask = 0x3f; | 
 | 	tp->mii.reg_num_mask = 0x1f; | 
 | 	tp->mii.phy_id = R8152_PHY_ID; | 
 | 	tp->mii.supports_gmii = 0; | 
 |  | 
 | 	r8152b_get_version(tp); | 
 | 	r8152b_init(tp); | 
 | 	set_ethernet_addr(tp); | 
 |  | 
 | 	if (!alloc_all_urbs(tp)) { | 
 | 		netif_err(tp, probe, netdev, "out of memory"); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	tp->rx_skb = netdev_alloc_skb(netdev, | 
 | 			RTL8152_RMS + sizeof(struct rx_desc)); | 
 | 	if (!tp->rx_skb) | 
 | 		goto out1; | 
 |  | 
 | 	usb_set_intfdata(intf, tp); | 
 | 	SET_NETDEV_DEV(netdev, &intf->dev); | 
 |  | 
 |  | 
 | 	if (register_netdev(netdev) != 0) { | 
 | 		netif_err(tp, probe, netdev, "couldn't register the device"); | 
 | 		goto out2; | 
 | 	} | 
 |  | 
 | 	netif_info(tp, probe, netdev, "%s", DRIVER_VERSION); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out2: | 
 | 	usb_set_intfdata(intf, NULL); | 
 | 	dev_kfree_skb(tp->rx_skb); | 
 | out1: | 
 | 	free_all_urbs(tp); | 
 | out: | 
 | 	free_netdev(netdev); | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static void rtl8152_unload(struct r8152 *tp) | 
 | { | 
 | 	u32	ocp_data; | 
 |  | 
 | 	if (tp->version != RTL_VER_01) { | 
 | 		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); | 
 | 		ocp_data |= POWER_CUT; | 
 | 		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); | 
 | 	} | 
 |  | 
 | 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); | 
 | 	ocp_data &= ~RWSUME_INDICATE; | 
 | 	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); | 
 | } | 
 |  | 
 | static void rtl8152_disconnect(struct usb_interface *intf) | 
 | { | 
 | 	struct r8152 *tp = usb_get_intfdata(intf); | 
 |  | 
 | 	usb_set_intfdata(intf, NULL); | 
 | 	if (tp) { | 
 | 		set_bit(RTL8152_UNPLUG, &tp->flags); | 
 | 		tasklet_kill(&tp->tl); | 
 | 		unregister_netdev(tp->netdev); | 
 | 		rtl8152_unload(tp); | 
 | 		free_all_urbs(tp); | 
 | 		if (tp->rx_skb) | 
 | 			dev_kfree_skb(tp->rx_skb); | 
 | 		free_netdev(tp->netdev); | 
 | 	} | 
 | } | 
 |  | 
 | /* table of devices that work with this driver */ | 
 | static struct usb_device_id rtl8152_table[] = { | 
 | 	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, | 
 | 	{} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(usb, rtl8152_table); | 
 |  | 
 | static struct usb_driver rtl8152_driver = { | 
 | 	.name =		MODULENAME, | 
 | 	.probe =	rtl8152_probe, | 
 | 	.disconnect =	rtl8152_disconnect, | 
 | 	.id_table =	rtl8152_table, | 
 | 	.suspend =	rtl8152_suspend, | 
 | 	.resume =	rtl8152_resume | 
 | }; | 
 |  | 
 | static int __init usb_rtl8152_init(void) | 
 | { | 
 | 	return usb_register(&rtl8152_driver); | 
 | } | 
 |  | 
 | static void __exit usb_rtl8152_exit(void) | 
 | { | 
 | 	usb_deregister(&rtl8152_driver); | 
 | } | 
 |  | 
 | module_init(usb_rtl8152_init); | 
 | module_exit(usb_rtl8152_exit); | 
 |  | 
 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); |