| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2016 Noralf Trønnes |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_simple_kms_helper.h> |
| |
| struct tinydrm_connector { |
| struct drm_connector base; |
| struct drm_display_mode mode; |
| }; |
| |
| static inline struct tinydrm_connector * |
| to_tinydrm_connector(struct drm_connector *connector) |
| { |
| return container_of(connector, struct tinydrm_connector, base); |
| } |
| |
| static int tinydrm_connector_get_modes(struct drm_connector *connector) |
| { |
| struct tinydrm_connector *tconn = to_tinydrm_connector(connector); |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &tconn->mode); |
| if (!mode) { |
| DRM_ERROR("Failed to duplicate mode\n"); |
| return 0; |
| } |
| |
| if (mode->name[0] == '\0') |
| drm_mode_set_name(mode); |
| |
| mode->type |= DRM_MODE_TYPE_PREFERRED; |
| drm_mode_probed_add(connector, mode); |
| |
| if (mode->width_mm) { |
| connector->display_info.width_mm = mode->width_mm; |
| connector->display_info.height_mm = mode->height_mm; |
| } |
| |
| return 1; |
| } |
| |
| static const struct drm_connector_helper_funcs tinydrm_connector_hfuncs = { |
| .get_modes = tinydrm_connector_get_modes, |
| }; |
| |
| static enum drm_connector_status |
| tinydrm_connector_detect(struct drm_connector *connector, bool force) |
| { |
| if (drm_dev_is_unplugged(connector->dev)) |
| return connector_status_disconnected; |
| |
| return connector->status; |
| } |
| |
| static void tinydrm_connector_destroy(struct drm_connector *connector) |
| { |
| struct tinydrm_connector *tconn = to_tinydrm_connector(connector); |
| |
| drm_connector_cleanup(connector); |
| kfree(tconn); |
| } |
| |
| static const struct drm_connector_funcs tinydrm_connector_funcs = { |
| .reset = drm_atomic_helper_connector_reset, |
| .detect = tinydrm_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = tinydrm_connector_destroy, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| struct drm_connector * |
| tinydrm_connector_create(struct drm_device *drm, |
| const struct drm_display_mode *mode, |
| int connector_type) |
| { |
| struct tinydrm_connector *tconn; |
| struct drm_connector *connector; |
| int ret; |
| |
| tconn = kzalloc(sizeof(*tconn), GFP_KERNEL); |
| if (!tconn) |
| return ERR_PTR(-ENOMEM); |
| |
| drm_mode_copy(&tconn->mode, mode); |
| connector = &tconn->base; |
| |
| drm_connector_helper_add(connector, &tinydrm_connector_hfuncs); |
| ret = drm_connector_init(drm, connector, &tinydrm_connector_funcs, |
| connector_type); |
| if (ret) { |
| kfree(tconn); |
| return ERR_PTR(ret); |
| } |
| |
| connector->status = connector_status_connected; |
| |
| return connector; |
| } |
| |
| static int tinydrm_rotate_mode(struct drm_display_mode *mode, |
| unsigned int rotation) |
| { |
| if (rotation == 0 || rotation == 180) { |
| return 0; |
| } else if (rotation == 90 || rotation == 270) { |
| swap(mode->hdisplay, mode->vdisplay); |
| swap(mode->hsync_start, mode->vsync_start); |
| swap(mode->hsync_end, mode->vsync_end); |
| swap(mode->htotal, mode->vtotal); |
| swap(mode->width_mm, mode->height_mm); |
| return 0; |
| } else { |
| return -EINVAL; |
| } |
| } |
| |
| /** |
| * tinydrm_display_pipe_init - Initialize display pipe |
| * @drm: DRM device |
| * @pipe: Display pipe |
| * @funcs: Display pipe functions |
| * @connector_type: Connector type |
| * @formats: Array of supported formats (DRM_FORMAT\_\*) |
| * @format_count: Number of elements in @formats |
| * @mode: Supported mode |
| * @rotation: Initial @mode rotation in degrees Counter Clock Wise |
| * |
| * This function sets up a &drm_simple_display_pipe with a &drm_connector that |
| * has one fixed &drm_display_mode which is rotated according to @rotation. |
| * |
| * Returns: |
| * Zero on success, negative error code on failure. |
| */ |
| int tinydrm_display_pipe_init(struct drm_device *drm, |
| struct drm_simple_display_pipe *pipe, |
| const struct drm_simple_display_pipe_funcs *funcs, |
| int connector_type, |
| const uint32_t *formats, |
| unsigned int format_count, |
| const struct drm_display_mode *mode, |
| unsigned int rotation) |
| { |
| struct drm_display_mode mode_copy; |
| struct drm_connector *connector; |
| int ret; |
| static const uint64_t modifiers[] = { |
| DRM_FORMAT_MOD_LINEAR, |
| DRM_FORMAT_MOD_INVALID |
| }; |
| |
| drm_mode_copy(&mode_copy, mode); |
| ret = tinydrm_rotate_mode(&mode_copy, rotation); |
| if (ret) { |
| DRM_ERROR("Illegal rotation value %u\n", rotation); |
| return -EINVAL; |
| } |
| |
| drm->mode_config.min_width = mode_copy.hdisplay; |
| drm->mode_config.max_width = mode_copy.hdisplay; |
| drm->mode_config.min_height = mode_copy.vdisplay; |
| drm->mode_config.max_height = mode_copy.vdisplay; |
| |
| connector = tinydrm_connector_create(drm, &mode_copy, connector_type); |
| if (IS_ERR(connector)) |
| return PTR_ERR(connector); |
| |
| return drm_simple_display_pipe_init(drm, pipe, funcs, formats, |
| format_count, modifiers, connector); |
| } |
| EXPORT_SYMBOL(tinydrm_display_pipe_init); |