| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 Marvell |
| * |
| * Antoine Tenart <antoine.tenart@free-electrons.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/firmware.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| |
| #include <crypto/internal/aead.h> |
| #include <crypto/internal/hash.h> |
| #include <crypto/internal/skcipher.h> |
| |
| #include "safexcel.h" |
| |
| static u32 max_rings = EIP197_MAX_RINGS; |
| module_param(max_rings, uint, 0644); |
| MODULE_PARM_DESC(max_rings, "Maximum number of rings to use."); |
| |
| static void eip197_trc_cache_init(struct safexcel_crypto_priv *priv) |
| { |
| u32 val, htable_offset; |
| int i, cs_rc_max, cs_ht_wc, cs_trc_rec_wc, cs_trc_lg_rec_wc; |
| |
| if (priv->version == EIP197B) { |
| cs_rc_max = EIP197B_CS_RC_MAX; |
| cs_ht_wc = EIP197B_CS_HT_WC; |
| cs_trc_rec_wc = EIP197B_CS_TRC_REC_WC; |
| cs_trc_lg_rec_wc = EIP197B_CS_TRC_LG_REC_WC; |
| } else { |
| cs_rc_max = EIP197D_CS_RC_MAX; |
| cs_ht_wc = EIP197D_CS_HT_WC; |
| cs_trc_rec_wc = EIP197D_CS_TRC_REC_WC; |
| cs_trc_lg_rec_wc = EIP197D_CS_TRC_LG_REC_WC; |
| } |
| |
| /* Enable the record cache memory access */ |
| val = readl(priv->base + EIP197_CS_RAM_CTRL); |
| val &= ~EIP197_TRC_ENABLE_MASK; |
| val |= EIP197_TRC_ENABLE_0; |
| writel(val, priv->base + EIP197_CS_RAM_CTRL); |
| |
| /* Clear all ECC errors */ |
| writel(0, priv->base + EIP197_TRC_ECCCTRL); |
| |
| /* |
| * Make sure the cache memory is accessible by taking record cache into |
| * reset. |
| */ |
| val = readl(priv->base + EIP197_TRC_PARAMS); |
| val |= EIP197_TRC_PARAMS_SW_RESET; |
| val &= ~EIP197_TRC_PARAMS_DATA_ACCESS; |
| writel(val, priv->base + EIP197_TRC_PARAMS); |
| |
| /* Clear all records */ |
| for (i = 0; i < cs_rc_max; i++) { |
| u32 val, offset = EIP197_CLASSIFICATION_RAMS + i * EIP197_CS_RC_SIZE; |
| |
| writel(EIP197_CS_RC_NEXT(EIP197_RC_NULL) | |
| EIP197_CS_RC_PREV(EIP197_RC_NULL), |
| priv->base + offset); |
| |
| val = EIP197_CS_RC_NEXT(i+1) | EIP197_CS_RC_PREV(i-1); |
| if (i == 0) |
| val |= EIP197_CS_RC_PREV(EIP197_RC_NULL); |
| else if (i == cs_rc_max - 1) |
| val |= EIP197_CS_RC_NEXT(EIP197_RC_NULL); |
| writel(val, priv->base + offset + sizeof(u32)); |
| } |
| |
| /* Clear the hash table entries */ |
| htable_offset = cs_rc_max * EIP197_CS_RC_SIZE; |
| for (i = 0; i < cs_ht_wc; i++) |
| writel(GENMASK(29, 0), |
| priv->base + EIP197_CLASSIFICATION_RAMS + htable_offset + i * sizeof(u32)); |
| |
| /* Disable the record cache memory access */ |
| val = readl(priv->base + EIP197_CS_RAM_CTRL); |
| val &= ~EIP197_TRC_ENABLE_MASK; |
| writel(val, priv->base + EIP197_CS_RAM_CTRL); |
| |
| /* Write head and tail pointers of the record free chain */ |
| val = EIP197_TRC_FREECHAIN_HEAD_PTR(0) | |
| EIP197_TRC_FREECHAIN_TAIL_PTR(cs_rc_max - 1); |
| writel(val, priv->base + EIP197_TRC_FREECHAIN); |
| |
| /* Configure the record cache #1 */ |
| val = EIP197_TRC_PARAMS2_RC_SZ_SMALL(cs_trc_rec_wc) | |
| EIP197_TRC_PARAMS2_HTABLE_PTR(cs_rc_max); |
| writel(val, priv->base + EIP197_TRC_PARAMS2); |
| |
| /* Configure the record cache #2 */ |
| val = EIP197_TRC_PARAMS_RC_SZ_LARGE(cs_trc_lg_rec_wc) | |
| EIP197_TRC_PARAMS_BLK_TIMER_SPEED(1) | |
| EIP197_TRC_PARAMS_HTABLE_SZ(2); |
| writel(val, priv->base + EIP197_TRC_PARAMS); |
| } |
| |
| static void eip197_write_firmware(struct safexcel_crypto_priv *priv, |
| const struct firmware *fw, int pe, u32 ctrl, |
| u32 prog_en) |
| { |
| const u32 *data = (const u32 *)fw->data; |
| u32 val; |
| int i; |
| |
| /* Reset the engine to make its program memory accessible */ |
| writel(EIP197_PE_ICE_x_CTRL_SW_RESET | |
| EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR | |
| EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR, |
| EIP197_PE(priv) + ctrl); |
| |
| /* Enable access to the program memory */ |
| writel(prog_en, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); |
| |
| /* Write the firmware */ |
| for (i = 0; i < fw->size / sizeof(u32); i++) |
| writel(be32_to_cpu(data[i]), |
| priv->base + EIP197_CLASSIFICATION_RAMS + i * sizeof(u32)); |
| |
| /* Disable access to the program memory */ |
| writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); |
| |
| /* Release engine from reset */ |
| val = readl(EIP197_PE(priv) + ctrl); |
| val &= ~EIP197_PE_ICE_x_CTRL_SW_RESET; |
| writel(val, EIP197_PE(priv) + ctrl); |
| } |
| |
| static int eip197_load_firmwares(struct safexcel_crypto_priv *priv) |
| { |
| const char *fw_name[] = {"ifpp.bin", "ipue.bin"}; |
| const struct firmware *fw[FW_NB]; |
| char fw_path[31], *dir = NULL; |
| int i, j, ret = 0, pe; |
| u32 val; |
| |
| switch (priv->version) { |
| case EIP197B: |
| dir = "eip197b"; |
| break; |
| case EIP197D: |
| dir = "eip197d"; |
| break; |
| default: |
| /* No firmware is required */ |
| return 0; |
| } |
| |
| for (i = 0; i < FW_NB; i++) { |
| snprintf(fw_path, 31, "inside-secure/%s/%s", dir, fw_name[i]); |
| ret = request_firmware(&fw[i], fw_path, priv->dev); |
| if (ret) { |
| if (priv->version != EIP197B) |
| goto release_fw; |
| |
| /* Fallback to the old firmware location for the |
| * EIP197b. |
| */ |
| ret = request_firmware(&fw[i], fw_name[i], priv->dev); |
| if (ret) { |
| dev_err(priv->dev, |
| "Failed to request firmware %s (%d)\n", |
| fw_name[i], ret); |
| goto release_fw; |
| } |
| } |
| } |
| |
| for (pe = 0; pe < priv->config.pes; pe++) { |
| /* Clear the scratchpad memory */ |
| val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe)); |
| val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER | |
| EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN | |
| EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS | |
| EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS; |
| writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe)); |
| |
| memset_io(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_RAM(pe), 0, |
| EIP197_NUM_OF_SCRATCH_BLOCKS * sizeof(u32)); |
| |
| eip197_write_firmware(priv, fw[FW_IFPP], pe, |
| EIP197_PE_ICE_FPP_CTRL(pe), |
| EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN); |
| |
| eip197_write_firmware(priv, fw[FW_IPUE], pe, |
| EIP197_PE_ICE_PUE_CTRL(pe), |
| EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN); |
| } |
| |
| release_fw: |
| for (j = 0; j < i; j++) |
| release_firmware(fw[j]); |
| |
| return ret; |
| } |
| |
| static int safexcel_hw_setup_cdesc_rings(struct safexcel_crypto_priv *priv) |
| { |
| u32 hdw, cd_size_rnd, val; |
| int i; |
| |
| hdw = readl(EIP197_HIA_AIC_G(priv) + EIP197_HIA_OPTIONS); |
| hdw &= GENMASK(27, 25); |
| hdw >>= 25; |
| |
| cd_size_rnd = (priv->config.cd_size + (BIT(hdw) - 1)) >> hdw; |
| |
| for (i = 0; i < priv->config.rings; i++) { |
| /* ring base address */ |
| writel(lower_32_bits(priv->ring[i].cdr.base_dma), |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO); |
| writel(upper_32_bits(priv->ring[i].cdr.base_dma), |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI); |
| |
| writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.cd_offset << 16) | |
| priv->config.cd_size, |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE); |
| writel(((EIP197_FETCH_COUNT * (cd_size_rnd << hdw)) << 16) | |
| (EIP197_FETCH_COUNT * priv->config.cd_offset), |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG); |
| |
| /* Configure DMA tx control */ |
| val = EIP197_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS); |
| val |= EIP197_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS); |
| writel(val, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DMA_CFG); |
| |
| /* clear any pending interrupt */ |
| writel(GENMASK(5, 0), |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_STAT); |
| } |
| |
| return 0; |
| } |
| |
| static int safexcel_hw_setup_rdesc_rings(struct safexcel_crypto_priv *priv) |
| { |
| u32 hdw, rd_size_rnd, val; |
| int i; |
| |
| hdw = readl(EIP197_HIA_AIC_G(priv) + EIP197_HIA_OPTIONS); |
| hdw &= GENMASK(27, 25); |
| hdw >>= 25; |
| |
| rd_size_rnd = (priv->config.rd_size + (BIT(hdw) - 1)) >> hdw; |
| |
| for (i = 0; i < priv->config.rings; i++) { |
| /* ring base address */ |
| writel(lower_32_bits(priv->ring[i].rdr.base_dma), |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO); |
| writel(upper_32_bits(priv->ring[i].rdr.base_dma), |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI); |
| |
| writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.rd_offset << 16) | |
| priv->config.rd_size, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE); |
| |
| writel(((EIP197_FETCH_COUNT * (rd_size_rnd << hdw)) << 16) | |
| (EIP197_FETCH_COUNT * priv->config.rd_offset), |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG); |
| |
| /* Configure DMA tx control */ |
| val = EIP197_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS); |
| val |= EIP197_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS); |
| val |= EIP197_HIA_xDR_WR_RES_BUF | EIP197_HIA_xDR_WR_CTRL_BUF; |
| writel(val, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DMA_CFG); |
| |
| /* clear any pending interrupt */ |
| writel(GENMASK(7, 0), |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_STAT); |
| |
| /* enable ring interrupt */ |
| val = readl(EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CTRL(i)); |
| val |= EIP197_RDR_IRQ(i); |
| writel(val, EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CTRL(i)); |
| } |
| |
| return 0; |
| } |
| |
| static int safexcel_hw_init(struct safexcel_crypto_priv *priv) |
| { |
| u32 version, val; |
| int i, ret, pe; |
| |
| /* Determine endianess and configure byte swap */ |
| version = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_VERSION); |
| val = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL); |
| |
| if ((version & 0xffff) == EIP197_HIA_VERSION_BE) |
| val |= EIP197_MST_CTRL_BYTE_SWAP; |
| else if (((version >> 16) & 0xffff) == EIP197_HIA_VERSION_LE) |
| val |= (EIP197_MST_CTRL_NO_BYTE_SWAP >> 24); |
| |
| /* For EIP197 set maximum number of TX commands to 2^5 = 32 */ |
| if (priv->version == EIP197B || priv->version == EIP197D) |
| val |= EIP197_MST_CTRL_TX_MAX_CMD(5); |
| |
| writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL); |
| |
| /* Configure wr/rd cache values */ |
| writel(EIP197_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) | |
| EIP197_MST_CTRL_WD_CACHE(WR_CACHE_4BITS), |
| EIP197_HIA_GEN_CFG(priv) + EIP197_MST_CTRL); |
| |
| /* Interrupts reset */ |
| |
| /* Disable all global interrupts */ |
| writel(0, EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ENABLE_CTRL); |
| |
| /* Clear any pending interrupt */ |
| writel(GENMASK(31, 0), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK); |
| |
| /* Processing Engine configuration */ |
| for (pe = 0; pe < priv->config.pes; pe++) { |
| /* Data Fetch Engine configuration */ |
| |
| /* Reset all DFE threads */ |
| writel(EIP197_DxE_THR_CTRL_RESET_PE, |
| EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe)); |
| |
| if (priv->version == EIP197B || priv->version == EIP197D) { |
| /* Reset HIA input interface arbiter */ |
| writel(EIP197_HIA_RA_PE_CTRL_RESET, |
| EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe)); |
| } |
| |
| /* DMA transfer size to use */ |
| val = EIP197_HIA_DFE_CFG_DIS_DEBUG; |
| val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(6) | |
| EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(9); |
| val |= EIP197_HIA_DxE_CFG_MIN_CTRL_SIZE(6) | |
| EIP197_HIA_DxE_CFG_MAX_CTRL_SIZE(7); |
| val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(RD_CACHE_3BITS); |
| val |= EIP197_HIA_DxE_CFG_CTRL_CACHE_CTRL(RD_CACHE_3BITS); |
| writel(val, EIP197_HIA_DFE(priv) + EIP197_HIA_DFE_CFG(pe)); |
| |
| /* Leave the DFE threads reset state */ |
| writel(0, EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe)); |
| |
| /* Configure the processing engine thresholds */ |
| writel(EIP197_PE_IN_xBUF_THRES_MIN(6) | |
| EIP197_PE_IN_xBUF_THRES_MAX(9), |
| EIP197_PE(priv) + EIP197_PE_IN_DBUF_THRES(pe)); |
| writel(EIP197_PE_IN_xBUF_THRES_MIN(6) | |
| EIP197_PE_IN_xBUF_THRES_MAX(7), |
| EIP197_PE(priv) + EIP197_PE_IN_TBUF_THRES(pe)); |
| |
| if (priv->version == EIP197B || priv->version == EIP197D) { |
| /* enable HIA input interface arbiter and rings */ |
| writel(EIP197_HIA_RA_PE_CTRL_EN | |
| GENMASK(priv->config.rings - 1, 0), |
| EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe)); |
| } |
| |
| /* Data Store Engine configuration */ |
| |
| /* Reset all DSE threads */ |
| writel(EIP197_DxE_THR_CTRL_RESET_PE, |
| EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe)); |
| |
| /* Wait for all DSE threads to complete */ |
| while ((readl(EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_STAT(pe)) & |
| GENMASK(15, 12)) != GENMASK(15, 12)) |
| ; |
| |
| /* DMA transfer size to use */ |
| val = EIP197_HIA_DSE_CFG_DIS_DEBUG; |
| val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(7) | |
| EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(8); |
| val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS); |
| val |= EIP197_HIA_DSE_CFG_ALWAYS_BUFFERABLE; |
| /* FIXME: instability issues can occur for EIP97 but disabling it impact |
| * performances. |
| */ |
| if (priv->version == EIP197B || priv->version == EIP197D) |
| val |= EIP197_HIA_DSE_CFG_EN_SINGLE_WR; |
| writel(val, EIP197_HIA_DSE(priv) + EIP197_HIA_DSE_CFG(pe)); |
| |
| /* Leave the DSE threads reset state */ |
| writel(0, EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe)); |
| |
| /* Configure the procesing engine thresholds */ |
| writel(EIP197_PE_OUT_DBUF_THRES_MIN(7) | |
| EIP197_PE_OUT_DBUF_THRES_MAX(8), |
| EIP197_PE(priv) + EIP197_PE_OUT_DBUF_THRES(pe)); |
| |
| /* Processing Engine configuration */ |
| |
| /* H/W capabilities selection */ |
| val = EIP197_FUNCTION_RSVD; |
| val |= EIP197_PROTOCOL_ENCRYPT_ONLY | EIP197_PROTOCOL_HASH_ONLY; |
| val |= EIP197_PROTOCOL_ENCRYPT_HASH | EIP197_PROTOCOL_HASH_DECRYPT; |
| val |= EIP197_ALG_DES_ECB | EIP197_ALG_DES_CBC; |
| val |= EIP197_ALG_3DES_ECB | EIP197_ALG_3DES_CBC; |
| val |= EIP197_ALG_AES_ECB | EIP197_ALG_AES_CBC; |
| val |= EIP197_ALG_MD5 | EIP197_ALG_HMAC_MD5; |
| val |= EIP197_ALG_SHA1 | EIP197_ALG_HMAC_SHA1; |
| val |= EIP197_ALG_SHA2 | EIP197_ALG_HMAC_SHA2; |
| writel(val, EIP197_PE(priv) + EIP197_PE_EIP96_FUNCTION_EN(pe)); |
| } |
| |
| /* Command Descriptor Rings prepare */ |
| for (i = 0; i < priv->config.rings; i++) { |
| /* Clear interrupts for this ring */ |
| writel(GENMASK(31, 0), |
| EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CLR(i)); |
| |
| /* Disable external triggering */ |
| writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG); |
| |
| /* Clear the pending prepared counter */ |
| writel(EIP197_xDR_PREP_CLR_COUNT, |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PREP_COUNT); |
| |
| /* Clear the pending processed counter */ |
| writel(EIP197_xDR_PROC_CLR_COUNT, |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_COUNT); |
| |
| writel(0, |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PREP_PNTR); |
| writel(0, |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR); |
| |
| writel((EIP197_DEFAULT_RING_SIZE * priv->config.cd_offset) << 2, |
| EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_SIZE); |
| } |
| |
| /* Result Descriptor Ring prepare */ |
| for (i = 0; i < priv->config.rings; i++) { |
| /* Disable external triggering*/ |
| writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG); |
| |
| /* Clear the pending prepared counter */ |
| writel(EIP197_xDR_PREP_CLR_COUNT, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PREP_COUNT); |
| |
| /* Clear the pending processed counter */ |
| writel(EIP197_xDR_PROC_CLR_COUNT, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_COUNT); |
| |
| writel(0, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PREP_PNTR); |
| writel(0, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR); |
| |
| /* Ring size */ |
| writel((EIP197_DEFAULT_RING_SIZE * priv->config.rd_offset) << 2, |
| EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_SIZE); |
| } |
| |
| for (pe = 0; pe < priv->config.pes; pe++) { |
| /* Enable command descriptor rings */ |
| writel(EIP197_DxE_THR_CTRL_EN | GENMASK(priv->config.rings - 1, 0), |
| EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe)); |
| |
| /* Enable result descriptor rings */ |
| writel(EIP197_DxE_THR_CTRL_EN | GENMASK(priv->config.rings - 1, 0), |
| EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe)); |
| } |
| |
| /* Clear any HIA interrupt */ |
| writel(GENMASK(30, 20), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK); |
| |
| if (priv->version == EIP197B || priv->version == EIP197D) { |
| eip197_trc_cache_init(priv); |
| |
| ret = eip197_load_firmwares(priv); |
| if (ret) |
| return ret; |
| } |
| |
| safexcel_hw_setup_cdesc_rings(priv); |
| safexcel_hw_setup_rdesc_rings(priv); |
| |
| return 0; |
| } |
| |
| /* Called with ring's lock taken */ |
| static void safexcel_try_push_requests(struct safexcel_crypto_priv *priv, |
| int ring) |
| { |
| int coal = min_t(int, priv->ring[ring].requests, EIP197_MAX_BATCH_SZ); |
| |
| if (!coal) |
| return; |
| |
| /* Configure when we want an interrupt */ |
| writel(EIP197_HIA_RDR_THRESH_PKT_MODE | |
| EIP197_HIA_RDR_THRESH_PROC_PKT(coal), |
| EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_THRESH); |
| } |
| |
| void safexcel_dequeue(struct safexcel_crypto_priv *priv, int ring) |
| { |
| struct crypto_async_request *req, *backlog; |
| struct safexcel_context *ctx; |
| int ret, nreq = 0, cdesc = 0, rdesc = 0, commands, results; |
| |
| /* If a request wasn't properly dequeued because of a lack of resources, |
| * proceeded it first, |
| */ |
| req = priv->ring[ring].req; |
| backlog = priv->ring[ring].backlog; |
| if (req) |
| goto handle_req; |
| |
| while (true) { |
| spin_lock_bh(&priv->ring[ring].queue_lock); |
| backlog = crypto_get_backlog(&priv->ring[ring].queue); |
| req = crypto_dequeue_request(&priv->ring[ring].queue); |
| spin_unlock_bh(&priv->ring[ring].queue_lock); |
| |
| if (!req) { |
| priv->ring[ring].req = NULL; |
| priv->ring[ring].backlog = NULL; |
| goto finalize; |
| } |
| |
| handle_req: |
| ctx = crypto_tfm_ctx(req->tfm); |
| ret = ctx->send(req, ring, &commands, &results); |
| if (ret) |
| goto request_failed; |
| |
| if (backlog) |
| backlog->complete(backlog, -EINPROGRESS); |
| |
| /* In case the send() helper did not issue any command to push |
| * to the engine because the input data was cached, continue to |
| * dequeue other requests as this is valid and not an error. |
| */ |
| if (!commands && !results) |
| continue; |
| |
| cdesc += commands; |
| rdesc += results; |
| nreq++; |
| } |
| |
| request_failed: |
| /* Not enough resources to handle all the requests. Bail out and save |
| * the request and the backlog for the next dequeue call (per-ring). |
| */ |
| priv->ring[ring].req = req; |
| priv->ring[ring].backlog = backlog; |
| |
| finalize: |
| if (!nreq) |
| return; |
| |
| spin_lock_bh(&priv->ring[ring].lock); |
| |
| priv->ring[ring].requests += nreq; |
| |
| if (!priv->ring[ring].busy) { |
| safexcel_try_push_requests(priv, ring); |
| priv->ring[ring].busy = true; |
| } |
| |
| spin_unlock_bh(&priv->ring[ring].lock); |
| |
| /* let the RDR know we have pending descriptors */ |
| writel((rdesc * priv->config.rd_offset) << 2, |
| EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT); |
| |
| /* let the CDR know we have pending descriptors */ |
| writel((cdesc * priv->config.cd_offset) << 2, |
| EIP197_HIA_CDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT); |
| } |
| |
| inline int safexcel_rdesc_check_errors(struct safexcel_crypto_priv *priv, |
| struct safexcel_result_desc *rdesc) |
| { |
| if (likely(!rdesc->result_data.error_code)) |
| return 0; |
| |
| if (rdesc->result_data.error_code & 0x407f) { |
| /* Fatal error (bits 0-7, 14) */ |
| dev_err(priv->dev, |
| "cipher: result: result descriptor error (%d)\n", |
| rdesc->result_data.error_code); |
| return -EIO; |
| } else if (rdesc->result_data.error_code == BIT(9)) { |
| /* Authentication failed */ |
| return -EBADMSG; |
| } |
| |
| /* All other non-fatal errors */ |
| return -EINVAL; |
| } |
| |
| inline void safexcel_rdr_req_set(struct safexcel_crypto_priv *priv, |
| int ring, |
| struct safexcel_result_desc *rdesc, |
| struct crypto_async_request *req) |
| { |
| int i = safexcel_ring_rdr_rdesc_index(priv, ring, rdesc); |
| |
| priv->ring[ring].rdr_req[i] = req; |
| } |
| |
| inline struct crypto_async_request * |
| safexcel_rdr_req_get(struct safexcel_crypto_priv *priv, int ring) |
| { |
| int i = safexcel_ring_first_rdr_index(priv, ring); |
| |
| return priv->ring[ring].rdr_req[i]; |
| } |
| |
| void safexcel_complete(struct safexcel_crypto_priv *priv, int ring) |
| { |
| struct safexcel_command_desc *cdesc; |
| |
| /* Acknowledge the command descriptors */ |
| do { |
| cdesc = safexcel_ring_next_rptr(priv, &priv->ring[ring].cdr); |
| if (IS_ERR(cdesc)) { |
| dev_err(priv->dev, |
| "Could not retrieve the command descriptor\n"); |
| return; |
| } |
| } while (!cdesc->last_seg); |
| } |
| |
| void safexcel_inv_complete(struct crypto_async_request *req, int error) |
| { |
| struct safexcel_inv_result *result = req->data; |
| |
| if (error == -EINPROGRESS) |
| return; |
| |
| result->error = error; |
| complete(&result->completion); |
| } |
| |
| int safexcel_invalidate_cache(struct crypto_async_request *async, |
| struct safexcel_crypto_priv *priv, |
| dma_addr_t ctxr_dma, int ring) |
| { |
| struct safexcel_command_desc *cdesc; |
| struct safexcel_result_desc *rdesc; |
| int ret = 0; |
| |
| /* Prepare command descriptor */ |
| cdesc = safexcel_add_cdesc(priv, ring, true, true, 0, 0, 0, ctxr_dma); |
| if (IS_ERR(cdesc)) |
| return PTR_ERR(cdesc); |
| |
| cdesc->control_data.type = EIP197_TYPE_EXTENDED; |
| cdesc->control_data.options = 0; |
| cdesc->control_data.refresh = 0; |
| cdesc->control_data.control0 = CONTEXT_CONTROL_INV_TR; |
| |
| /* Prepare result descriptor */ |
| rdesc = safexcel_add_rdesc(priv, ring, true, true, 0, 0); |
| |
| if (IS_ERR(rdesc)) { |
| ret = PTR_ERR(rdesc); |
| goto cdesc_rollback; |
| } |
| |
| safexcel_rdr_req_set(priv, ring, rdesc, async); |
| |
| return ret; |
| |
| cdesc_rollback: |
| safexcel_ring_rollback_wptr(priv, &priv->ring[ring].cdr); |
| |
| return ret; |
| } |
| |
| static inline void safexcel_handle_result_descriptor(struct safexcel_crypto_priv *priv, |
| int ring) |
| { |
| struct crypto_async_request *req; |
| struct safexcel_context *ctx; |
| int ret, i, nreq, ndesc, tot_descs, handled = 0; |
| bool should_complete; |
| |
| handle_results: |
| tot_descs = 0; |
| |
| nreq = readl(EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT); |
| nreq >>= EIP197_xDR_PROC_xD_PKT_OFFSET; |
| nreq &= EIP197_xDR_PROC_xD_PKT_MASK; |
| if (!nreq) |
| goto requests_left; |
| |
| for (i = 0; i < nreq; i++) { |
| req = safexcel_rdr_req_get(priv, ring); |
| |
| ctx = crypto_tfm_ctx(req->tfm); |
| ndesc = ctx->handle_result(priv, ring, req, |
| &should_complete, &ret); |
| if (ndesc < 0) { |
| dev_err(priv->dev, "failed to handle result (%d)", ndesc); |
| goto acknowledge; |
| } |
| |
| if (should_complete) { |
| local_bh_disable(); |
| req->complete(req, ret); |
| local_bh_enable(); |
| } |
| |
| tot_descs += ndesc; |
| handled++; |
| } |
| |
| acknowledge: |
| if (i) { |
| writel(EIP197_xDR_PROC_xD_PKT(i) | |
| EIP197_xDR_PROC_xD_COUNT(tot_descs * priv->config.rd_offset), |
| EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT); |
| } |
| |
| /* If the number of requests overflowed the counter, try to proceed more |
| * requests. |
| */ |
| if (nreq == EIP197_xDR_PROC_xD_PKT_MASK) |
| goto handle_results; |
| |
| requests_left: |
| spin_lock_bh(&priv->ring[ring].lock); |
| |
| priv->ring[ring].requests -= handled; |
| safexcel_try_push_requests(priv, ring); |
| |
| if (!priv->ring[ring].requests) |
| priv->ring[ring].busy = false; |
| |
| spin_unlock_bh(&priv->ring[ring].lock); |
| } |
| |
| static void safexcel_dequeue_work(struct work_struct *work) |
| { |
| struct safexcel_work_data *data = |
| container_of(work, struct safexcel_work_data, work); |
| |
| safexcel_dequeue(data->priv, data->ring); |
| } |
| |
| struct safexcel_ring_irq_data { |
| struct safexcel_crypto_priv *priv; |
| int ring; |
| }; |
| |
| static irqreturn_t safexcel_irq_ring(int irq, void *data) |
| { |
| struct safexcel_ring_irq_data *irq_data = data; |
| struct safexcel_crypto_priv *priv = irq_data->priv; |
| int ring = irq_data->ring, rc = IRQ_NONE; |
| u32 status, stat; |
| |
| status = readl(EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLED_STAT(ring)); |
| if (!status) |
| return rc; |
| |
| /* RDR interrupts */ |
| if (status & EIP197_RDR_IRQ(ring)) { |
| stat = readl(EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_STAT); |
| |
| if (unlikely(stat & EIP197_xDR_ERR)) { |
| /* |
| * Fatal error, the RDR is unusable and must be |
| * reinitialized. This should not happen under |
| * normal circumstances. |
| */ |
| dev_err(priv->dev, "RDR: fatal error."); |
| } else if (likely(stat & EIP197_xDR_THRESH)) { |
| rc = IRQ_WAKE_THREAD; |
| } |
| |
| /* ACK the interrupts */ |
| writel(stat & 0xff, |
| EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_STAT); |
| } |
| |
| /* ACK the interrupts */ |
| writel(status, EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ACK(ring)); |
| |
| return rc; |
| } |
| |
| static irqreturn_t safexcel_irq_ring_thread(int irq, void *data) |
| { |
| struct safexcel_ring_irq_data *irq_data = data; |
| struct safexcel_crypto_priv *priv = irq_data->priv; |
| int ring = irq_data->ring; |
| |
| safexcel_handle_result_descriptor(priv, ring); |
| |
| queue_work(priv->ring[ring].workqueue, |
| &priv->ring[ring].work_data.work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int safexcel_request_ring_irq(struct platform_device *pdev, const char *name, |
| irq_handler_t handler, |
| irq_handler_t threaded_handler, |
| struct safexcel_ring_irq_data *ring_irq_priv) |
| { |
| int ret, irq = platform_get_irq_byname(pdev, name); |
| |
| if (irq < 0) { |
| dev_err(&pdev->dev, "unable to get IRQ '%s'\n", name); |
| return irq; |
| } |
| |
| ret = devm_request_threaded_irq(&pdev->dev, irq, handler, |
| threaded_handler, IRQF_ONESHOT, |
| dev_name(&pdev->dev), ring_irq_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to request IRQ %d\n", irq); |
| return ret; |
| } |
| |
| return irq; |
| } |
| |
| static struct safexcel_alg_template *safexcel_algs[] = { |
| &safexcel_alg_ecb_des, |
| &safexcel_alg_cbc_des, |
| &safexcel_alg_ecb_des3_ede, |
| &safexcel_alg_cbc_des3_ede, |
| &safexcel_alg_ecb_aes, |
| &safexcel_alg_cbc_aes, |
| &safexcel_alg_md5, |
| &safexcel_alg_sha1, |
| &safexcel_alg_sha224, |
| &safexcel_alg_sha256, |
| &safexcel_alg_sha384, |
| &safexcel_alg_sha512, |
| &safexcel_alg_hmac_md5, |
| &safexcel_alg_hmac_sha1, |
| &safexcel_alg_hmac_sha224, |
| &safexcel_alg_hmac_sha256, |
| &safexcel_alg_hmac_sha384, |
| &safexcel_alg_hmac_sha512, |
| &safexcel_alg_authenc_hmac_sha1_cbc_aes, |
| &safexcel_alg_authenc_hmac_sha224_cbc_aes, |
| &safexcel_alg_authenc_hmac_sha256_cbc_aes, |
| &safexcel_alg_authenc_hmac_sha384_cbc_aes, |
| &safexcel_alg_authenc_hmac_sha512_cbc_aes, |
| }; |
| |
| static int safexcel_register_algorithms(struct safexcel_crypto_priv *priv) |
| { |
| int i, j, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(safexcel_algs); i++) { |
| safexcel_algs[i]->priv = priv; |
| |
| if (!(safexcel_algs[i]->engines & priv->version)) |
| continue; |
| |
| if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_SKCIPHER) |
| ret = crypto_register_skcipher(&safexcel_algs[i]->alg.skcipher); |
| else if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_AEAD) |
| ret = crypto_register_aead(&safexcel_algs[i]->alg.aead); |
| else |
| ret = crypto_register_ahash(&safexcel_algs[i]->alg.ahash); |
| |
| if (ret) |
| goto fail; |
| } |
| |
| return 0; |
| |
| fail: |
| for (j = 0; j < i; j++) { |
| if (!(safexcel_algs[j]->engines & priv->version)) |
| continue; |
| |
| if (safexcel_algs[j]->type == SAFEXCEL_ALG_TYPE_SKCIPHER) |
| crypto_unregister_skcipher(&safexcel_algs[j]->alg.skcipher); |
| else if (safexcel_algs[j]->type == SAFEXCEL_ALG_TYPE_AEAD) |
| crypto_unregister_aead(&safexcel_algs[j]->alg.aead); |
| else |
| crypto_unregister_ahash(&safexcel_algs[j]->alg.ahash); |
| } |
| |
| return ret; |
| } |
| |
| static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(safexcel_algs); i++) { |
| if (!(safexcel_algs[i]->engines & priv->version)) |
| continue; |
| |
| if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_SKCIPHER) |
| crypto_unregister_skcipher(&safexcel_algs[i]->alg.skcipher); |
| else if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_AEAD) |
| crypto_unregister_aead(&safexcel_algs[i]->alg.aead); |
| else |
| crypto_unregister_ahash(&safexcel_algs[i]->alg.ahash); |
| } |
| } |
| |
| static void safexcel_configure(struct safexcel_crypto_priv *priv) |
| { |
| u32 val, mask = 0; |
| |
| val = readl(EIP197_HIA_AIC_G(priv) + EIP197_HIA_OPTIONS); |
| |
| /* Read number of PEs from the engine */ |
| switch (priv->version) { |
| case EIP197B: |
| case EIP197D: |
| mask = EIP197_N_PES_MASK; |
| break; |
| default: |
| mask = EIP97_N_PES_MASK; |
| } |
| priv->config.pes = (val >> EIP197_N_PES_OFFSET) & mask; |
| |
| val = (val & GENMASK(27, 25)) >> 25; |
| mask = BIT(val) - 1; |
| |
| val = readl(EIP197_HIA_AIC_G(priv) + EIP197_HIA_OPTIONS); |
| priv->config.rings = min_t(u32, val & GENMASK(3, 0), max_rings); |
| |
| priv->config.cd_size = (sizeof(struct safexcel_command_desc) / sizeof(u32)); |
| priv->config.cd_offset = (priv->config.cd_size + mask) & ~mask; |
| |
| priv->config.rd_size = (sizeof(struct safexcel_result_desc) / sizeof(u32)); |
| priv->config.rd_offset = (priv->config.rd_size + mask) & ~mask; |
| } |
| |
| static void safexcel_init_register_offsets(struct safexcel_crypto_priv *priv) |
| { |
| struct safexcel_register_offsets *offsets = &priv->offsets; |
| |
| switch (priv->version) { |
| case EIP197B: |
| case EIP197D: |
| offsets->hia_aic = EIP197_HIA_AIC_BASE; |
| offsets->hia_aic_g = EIP197_HIA_AIC_G_BASE; |
| offsets->hia_aic_r = EIP197_HIA_AIC_R_BASE; |
| offsets->hia_aic_xdr = EIP197_HIA_AIC_xDR_BASE; |
| offsets->hia_dfe = EIP197_HIA_DFE_BASE; |
| offsets->hia_dfe_thr = EIP197_HIA_DFE_THR_BASE; |
| offsets->hia_dse = EIP197_HIA_DSE_BASE; |
| offsets->hia_dse_thr = EIP197_HIA_DSE_THR_BASE; |
| offsets->hia_gen_cfg = EIP197_HIA_GEN_CFG_BASE; |
| offsets->pe = EIP197_PE_BASE; |
| break; |
| case EIP97IES: |
| offsets->hia_aic = EIP97_HIA_AIC_BASE; |
| offsets->hia_aic_g = EIP97_HIA_AIC_G_BASE; |
| offsets->hia_aic_r = EIP97_HIA_AIC_R_BASE; |
| offsets->hia_aic_xdr = EIP97_HIA_AIC_xDR_BASE; |
| offsets->hia_dfe = EIP97_HIA_DFE_BASE; |
| offsets->hia_dfe_thr = EIP97_HIA_DFE_THR_BASE; |
| offsets->hia_dse = EIP97_HIA_DSE_BASE; |
| offsets->hia_dse_thr = EIP97_HIA_DSE_THR_BASE; |
| offsets->hia_gen_cfg = EIP97_HIA_GEN_CFG_BASE; |
| offsets->pe = EIP97_PE_BASE; |
| break; |
| } |
| } |
| |
| static int safexcel_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct safexcel_crypto_priv *priv; |
| int i, ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = dev; |
| priv->version = (enum safexcel_eip_version)of_device_get_match_data(dev); |
| |
| if (priv->version == EIP197B || priv->version == EIP197D) |
| priv->flags |= EIP197_TRC_CACHE; |
| |
| safexcel_init_register_offsets(priv); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(priv->base)) { |
| dev_err(dev, "failed to get resource\n"); |
| return PTR_ERR(priv->base); |
| } |
| |
| priv->clk = devm_clk_get(&pdev->dev, NULL); |
| ret = PTR_ERR_OR_ZERO(priv->clk); |
| /* The clock isn't mandatory */ |
| if (ret != -ENOENT) { |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(priv->clk); |
| if (ret) { |
| dev_err(dev, "unable to enable clk (%d)\n", ret); |
| return ret; |
| } |
| } |
| |
| priv->reg_clk = devm_clk_get(&pdev->dev, "reg"); |
| ret = PTR_ERR_OR_ZERO(priv->reg_clk); |
| /* The clock isn't mandatory */ |
| if (ret != -ENOENT) { |
| if (ret) |
| goto err_core_clk; |
| |
| ret = clk_prepare_enable(priv->reg_clk); |
| if (ret) { |
| dev_err(dev, "unable to enable reg clk (%d)\n", ret); |
| goto err_core_clk; |
| } |
| } |
| |
| ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); |
| if (ret) |
| goto err_reg_clk; |
| |
| priv->context_pool = dmam_pool_create("safexcel-context", dev, |
| sizeof(struct safexcel_context_record), |
| 1, 0); |
| if (!priv->context_pool) { |
| ret = -ENOMEM; |
| goto err_reg_clk; |
| } |
| |
| safexcel_configure(priv); |
| |
| priv->ring = devm_kzalloc(dev, priv->config.rings * sizeof(*priv->ring), |
| GFP_KERNEL); |
| if (!priv->ring) { |
| ret = -ENOMEM; |
| goto err_reg_clk; |
| } |
| |
| for (i = 0; i < priv->config.rings; i++) { |
| char irq_name[6] = {0}; /* "ringX\0" */ |
| char wq_name[9] = {0}; /* "wq_ringX\0" */ |
| int irq; |
| struct safexcel_ring_irq_data *ring_irq; |
| |
| ret = safexcel_init_ring_descriptors(priv, |
| &priv->ring[i].cdr, |
| &priv->ring[i].rdr); |
| if (ret) |
| goto err_reg_clk; |
| |
| priv->ring[i].rdr_req = devm_kzalloc(dev, |
| sizeof(priv->ring[i].rdr_req) * EIP197_DEFAULT_RING_SIZE, |
| GFP_KERNEL); |
| if (!priv->ring[i].rdr_req) { |
| ret = -ENOMEM; |
| goto err_reg_clk; |
| } |
| |
| ring_irq = devm_kzalloc(dev, sizeof(*ring_irq), GFP_KERNEL); |
| if (!ring_irq) { |
| ret = -ENOMEM; |
| goto err_reg_clk; |
| } |
| |
| ring_irq->priv = priv; |
| ring_irq->ring = i; |
| |
| snprintf(irq_name, 6, "ring%d", i); |
| irq = safexcel_request_ring_irq(pdev, irq_name, safexcel_irq_ring, |
| safexcel_irq_ring_thread, |
| ring_irq); |
| if (irq < 0) { |
| ret = irq; |
| goto err_reg_clk; |
| } |
| |
| priv->ring[i].work_data.priv = priv; |
| priv->ring[i].work_data.ring = i; |
| INIT_WORK(&priv->ring[i].work_data.work, safexcel_dequeue_work); |
| |
| snprintf(wq_name, 9, "wq_ring%d", i); |
| priv->ring[i].workqueue = create_singlethread_workqueue(wq_name); |
| if (!priv->ring[i].workqueue) { |
| ret = -ENOMEM; |
| goto err_reg_clk; |
| } |
| |
| priv->ring[i].requests = 0; |
| priv->ring[i].busy = false; |
| |
| crypto_init_queue(&priv->ring[i].queue, |
| EIP197_DEFAULT_RING_SIZE); |
| |
| spin_lock_init(&priv->ring[i].lock); |
| spin_lock_init(&priv->ring[i].queue_lock); |
| } |
| |
| platform_set_drvdata(pdev, priv); |
| atomic_set(&priv->ring_used, 0); |
| |
| ret = safexcel_hw_init(priv); |
| if (ret) { |
| dev_err(dev, "EIP h/w init failed (%d)\n", ret); |
| goto err_reg_clk; |
| } |
| |
| ret = safexcel_register_algorithms(priv); |
| if (ret) { |
| dev_err(dev, "Failed to register algorithms (%d)\n", ret); |
| goto err_reg_clk; |
| } |
| |
| return 0; |
| |
| err_reg_clk: |
| clk_disable_unprepare(priv->reg_clk); |
| err_core_clk: |
| clk_disable_unprepare(priv->clk); |
| return ret; |
| } |
| |
| static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv) |
| { |
| int i; |
| |
| for (i = 0; i < priv->config.rings; i++) { |
| /* clear any pending interrupt */ |
| writel(GENMASK(5, 0), EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_STAT); |
| writel(GENMASK(7, 0), EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_STAT); |
| |
| /* Reset the CDR base address */ |
| writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO); |
| writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI); |
| |
| /* Reset the RDR base address */ |
| writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO); |
| writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI); |
| } |
| } |
| |
| static int safexcel_remove(struct platform_device *pdev) |
| { |
| struct safexcel_crypto_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| safexcel_unregister_algorithms(priv); |
| safexcel_hw_reset_rings(priv); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| for (i = 0; i < priv->config.rings; i++) |
| destroy_workqueue(priv->ring[i].workqueue); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id safexcel_of_match_table[] = { |
| { |
| .compatible = "inside-secure,safexcel-eip97ies", |
| .data = (void *)EIP97IES, |
| }, |
| { |
| .compatible = "inside-secure,safexcel-eip197b", |
| .data = (void *)EIP197B, |
| }, |
| { |
| .compatible = "inside-secure,safexcel-eip197d", |
| .data = (void *)EIP197D, |
| }, |
| { |
| /* Deprecated. Kept for backward compatibility. */ |
| .compatible = "inside-secure,safexcel-eip97", |
| .data = (void *)EIP97IES, |
| }, |
| { |
| /* Deprecated. Kept for backward compatibility. */ |
| .compatible = "inside-secure,safexcel-eip197", |
| .data = (void *)EIP197B, |
| }, |
| {}, |
| }; |
| |
| |
| static struct platform_driver crypto_safexcel = { |
| .probe = safexcel_probe, |
| .remove = safexcel_remove, |
| .driver = { |
| .name = "crypto-safexcel", |
| .of_match_table = safexcel_of_match_table, |
| }, |
| }; |
| module_platform_driver(crypto_safexcel); |
| |
| MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>"); |
| MODULE_AUTHOR("Ofer Heifetz <oferh@marvell.com>"); |
| MODULE_AUTHOR("Igal Liberman <igall@marvell.com>"); |
| MODULE_DESCRIPTION("Support for SafeXcel cryptographic engine EIP197"); |
| MODULE_LICENSE("GPL v2"); |