| /* | 
 |  * Support for IDE interfaces on Celleb platform | 
 |  * | 
 |  * (C) Copyright 2006 TOSHIBA CORPORATION | 
 |  * | 
 |  * This code is based on drivers/ide/pci/siimage.c: | 
 |  * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org> | 
 |  * Copyright (C) 2003		Red Hat <alan@redhat.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along | 
 |  * with this program; if not, write to the Free Software Foundation, Inc., | 
 |  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | 
 |  */ | 
 |  | 
 | #include <linux/types.h> | 
 | #include <linux/module.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/ide.h> | 
 | #include <linux/init.h> | 
 |  | 
 | #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA            0x01b4 | 
 |  | 
 | #define SCC_PATA_NAME           "scc IDE" | 
 |  | 
 | #define TDVHSEL_MASTER          0x00000001 | 
 | #define TDVHSEL_SLAVE           0x00000004 | 
 |  | 
 | #define MODE_JCUSFEN            0x00000080 | 
 |  | 
 | #define CCKCTRL_ATARESET        0x00040000 | 
 | #define CCKCTRL_BUFCNT          0x00020000 | 
 | #define CCKCTRL_CRST            0x00010000 | 
 | #define CCKCTRL_OCLKEN          0x00000100 | 
 | #define CCKCTRL_ATACLKOEN       0x00000002 | 
 | #define CCKCTRL_LCLKEN          0x00000001 | 
 |  | 
 | #define QCHCD_IOS_SS		0x00000001 | 
 |  | 
 | #define QCHSD_STPDIAG		0x00020000 | 
 |  | 
 | #define INTMASK_MSK             0xD1000012 | 
 | #define INTSTS_SERROR		0x80000000 | 
 | #define INTSTS_PRERR		0x40000000 | 
 | #define INTSTS_RERR		0x10000000 | 
 | #define INTSTS_ICERR		0x01000000 | 
 | #define INTSTS_BMSINT		0x00000010 | 
 | #define INTSTS_BMHE		0x00000008 | 
 | #define INTSTS_IOIRQS           0x00000004 | 
 | #define INTSTS_INTRQ            0x00000002 | 
 | #define INTSTS_ACTEINT          0x00000001 | 
 |  | 
 | #define ECMODE_VALUE 0x01 | 
 |  | 
 | static struct scc_ports { | 
 | 	unsigned long ctl, dma; | 
 | 	struct ide_host *host;	/* for removing port from system */ | 
 | } scc_ports[MAX_HWIFS]; | 
 |  | 
 | /* PIO transfer mode  table */ | 
 | /* JCHST */ | 
 | static unsigned long JCHSTtbl[2][7] = { | 
 | 	{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},   /* 100MHz */ | 
 | 	{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}    /* 133MHz */ | 
 | }; | 
 |  | 
 | /* JCHHT */ | 
 | static unsigned long JCHHTtbl[2][7] = { | 
 | 	{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},   /* 100MHz */ | 
 | 	{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}    /* 133MHz */ | 
 | }; | 
 |  | 
 | /* JCHCT */ | 
 | static unsigned long JCHCTtbl[2][7] = { | 
 | 	{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},   /* 100MHz */ | 
 | 	{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}    /* 133MHz */ | 
 | }; | 
 |  | 
 |  | 
 | /* DMA transfer mode  table */ | 
 | /* JCHDCTM/JCHDCTS */ | 
 | static unsigned long JCHDCTxtbl[2][7] = { | 
 | 	{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},   /* 100MHz */ | 
 | 	{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}    /* 133MHz */ | 
 | }; | 
 |  | 
 | /* JCSTWTM/JCSTWTS  */ | 
 | static unsigned long JCSTWTxtbl[2][7] = { | 
 | 	{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},   /* 100MHz */ | 
 | 	{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */ | 
 | }; | 
 |  | 
 | /* JCTSS */ | 
 | static unsigned long JCTSStbl[2][7] = { | 
 | 	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},   /* 100MHz */ | 
 | 	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}    /* 133MHz */ | 
 | }; | 
 |  | 
 | /* JCENVT */ | 
 | static unsigned long JCENVTtbl[2][7] = { | 
 | 	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},   /* 100MHz */ | 
 | 	{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */ | 
 | }; | 
 |  | 
 | /* JCACTSELS/JCACTSELM */ | 
 | static unsigned long JCACTSELtbl[2][7] = { | 
 | 	{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},   /* 100MHz */ | 
 | 	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}    /* 133MHz */ | 
 | }; | 
 |  | 
 |  | 
 | static u8 scc_ide_inb(unsigned long port) | 
 | { | 
 | 	u32 data = in_be32((void*)port); | 
 | 	return (u8)data; | 
 | } | 
 |  | 
 | static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) | 
 | { | 
 | 	out_be32((void *)hwif->io_ports.command_addr, cmd); | 
 | 	eieio(); | 
 | 	in_be32((void *)(hwif->dma_base + 0x01c)); | 
 | 	eieio(); | 
 | } | 
 |  | 
 | static u8 scc_read_status(ide_hwif_t *hwif) | 
 | { | 
 | 	return (u8)in_be32((void *)hwif->io_ports.status_addr); | 
 | } | 
 |  | 
 | static u8 scc_read_altstatus(ide_hwif_t *hwif) | 
 | { | 
 | 	return (u8)in_be32((void *)hwif->io_ports.ctl_addr); | 
 | } | 
 |  | 
 | static u8 scc_read_sff_dma_status(ide_hwif_t *hwif) | 
 | { | 
 | 	return (u8)in_be32((void *)(hwif->dma_base + 4)); | 
 | } | 
 |  | 
 | static void scc_set_irq(ide_hwif_t *hwif, int on) | 
 | { | 
 | 	u8 ctl = ATA_DEVCTL_OBS; | 
 |  | 
 | 	if (on == 4) { /* hack for SRST */ | 
 | 		ctl |= 4; | 
 | 		on &= ~4; | 
 | 	} | 
 |  | 
 | 	ctl |= on ? 0 : 2; | 
 |  | 
 | 	out_be32((void *)hwif->io_ports.ctl_addr, ctl); | 
 | 	eieio(); | 
 | 	in_be32((void *)(hwif->dma_base + 0x01c)); | 
 | 	eieio(); | 
 | } | 
 |  | 
 | static void scc_ide_insw(unsigned long port, void *addr, u32 count) | 
 | { | 
 | 	u16 *ptr = (u16 *)addr; | 
 | 	while (count--) { | 
 | 		*ptr++ = le16_to_cpu(in_be32((void*)port)); | 
 | 	} | 
 | } | 
 |  | 
 | static void scc_ide_insl(unsigned long port, void *addr, u32 count) | 
 | { | 
 | 	u16 *ptr = (u16 *)addr; | 
 | 	while (count--) { | 
 | 		*ptr++ = le16_to_cpu(in_be32((void*)port)); | 
 | 		*ptr++ = le16_to_cpu(in_be32((void*)port)); | 
 | 	} | 
 | } | 
 |  | 
 | static void scc_ide_outb(u8 addr, unsigned long port) | 
 | { | 
 | 	out_be32((void*)port, addr); | 
 | } | 
 |  | 
 | static void | 
 | scc_ide_outsw(unsigned long port, void *addr, u32 count) | 
 | { | 
 | 	u16 *ptr = (u16 *)addr; | 
 | 	while (count--) { | 
 | 		out_be32((void*)port, cpu_to_le16(*ptr++)); | 
 | 	} | 
 | } | 
 |  | 
 | static void | 
 | scc_ide_outsl(unsigned long port, void *addr, u32 count) | 
 | { | 
 | 	u16 *ptr = (u16 *)addr; | 
 | 	while (count--) { | 
 | 		out_be32((void*)port, cpu_to_le16(*ptr++)); | 
 | 		out_be32((void*)port, cpu_to_le16(*ptr++)); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  *	scc_set_pio_mode	-	set host controller for PIO mode | 
 |  *	@drive: drive | 
 |  *	@pio: PIO mode number | 
 |  * | 
 |  *	Load the timing settings for this device mode into the | 
 |  *	controller. | 
 |  */ | 
 |  | 
 | static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) | 
 | { | 
 | 	ide_hwif_t *hwif = HWIF(drive); | 
 | 	struct scc_ports *ports = ide_get_hwifdata(hwif); | 
 | 	unsigned long ctl_base = ports->ctl; | 
 | 	unsigned long cckctrl_port = ctl_base + 0xff0; | 
 | 	unsigned long piosht_port = ctl_base + 0x000; | 
 | 	unsigned long pioct_port = ctl_base + 0x004; | 
 | 	unsigned long reg; | 
 | 	int offset; | 
 |  | 
 | 	reg = in_be32((void __iomem *)cckctrl_port); | 
 | 	if (reg & CCKCTRL_ATACLKOEN) { | 
 | 		offset = 1; /* 133MHz */ | 
 | 	} else { | 
 | 		offset = 0; /* 100MHz */ | 
 | 	} | 
 | 	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; | 
 | 	out_be32((void __iomem *)piosht_port, reg); | 
 | 	reg = JCHCTtbl[offset][pio]; | 
 | 	out_be32((void __iomem *)pioct_port, reg); | 
 | } | 
 |  | 
 | /** | 
 |  *	scc_set_dma_mode	-	set host controller for DMA mode | 
 |  *	@drive: drive | 
 |  *	@speed: DMA mode | 
 |  * | 
 |  *	Load the timing settings for this device mode into the | 
 |  *	controller. | 
 |  */ | 
 |  | 
 | static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) | 
 | { | 
 | 	ide_hwif_t *hwif = HWIF(drive); | 
 | 	struct scc_ports *ports = ide_get_hwifdata(hwif); | 
 | 	unsigned long ctl_base = ports->ctl; | 
 | 	unsigned long cckctrl_port = ctl_base + 0xff0; | 
 | 	unsigned long mdmact_port = ctl_base + 0x008; | 
 | 	unsigned long mcrcst_port = ctl_base + 0x00c; | 
 | 	unsigned long sdmact_port = ctl_base + 0x010; | 
 | 	unsigned long scrcst_port = ctl_base + 0x014; | 
 | 	unsigned long udenvt_port = ctl_base + 0x018; | 
 | 	unsigned long tdvhsel_port   = ctl_base + 0x020; | 
 | 	int is_slave = (&hwif->drives[1] == drive); | 
 | 	int offset, idx; | 
 | 	unsigned long reg; | 
 | 	unsigned long jcactsel; | 
 |  | 
 | 	reg = in_be32((void __iomem *)cckctrl_port); | 
 | 	if (reg & CCKCTRL_ATACLKOEN) { | 
 | 		offset = 1; /* 133MHz */ | 
 | 	} else { | 
 | 		offset = 0; /* 100MHz */ | 
 | 	} | 
 |  | 
 | 	idx = speed - XFER_UDMA_0; | 
 |  | 
 | 	jcactsel = JCACTSELtbl[offset][idx]; | 
 | 	if (is_slave) { | 
 | 		out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); | 
 | 		out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); | 
 | 		jcactsel = jcactsel << 2; | 
 | 		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); | 
 | 	} else { | 
 | 		out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); | 
 | 		out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); | 
 | 		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); | 
 | 	} | 
 | 	reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; | 
 | 	out_be32((void __iomem *)udenvt_port, reg); | 
 | } | 
 |  | 
 | static void scc_dma_host_set(ide_drive_t *drive, int on) | 
 | { | 
 | 	ide_hwif_t *hwif = drive->hwif; | 
 | 	u8 unit = drive->dn & 1; | 
 | 	u8 dma_stat = scc_ide_inb(hwif->dma_base + 4); | 
 |  | 
 | 	if (on) | 
 | 		dma_stat |= (1 << (5 + unit)); | 
 | 	else | 
 | 		dma_stat &= ~(1 << (5 + unit)); | 
 |  | 
 | 	scc_ide_outb(dma_stat, hwif->dma_base + 4); | 
 | } | 
 |  | 
 | /** | 
 |  *	scc_ide_dma_setup	-	begin a DMA phase | 
 |  *	@drive: target device | 
 |  * | 
 |  *	Build an IDE DMA PRD (IDE speak for scatter gather table) | 
 |  *	and then set up the DMA transfer registers. | 
 |  * | 
 |  *	Returns 0 on success. If a PIO fallback is required then 1 | 
 |  *	is returned. | 
 |  */ | 
 |  | 
 | static int scc_dma_setup(ide_drive_t *drive) | 
 | { | 
 | 	ide_hwif_t *hwif = drive->hwif; | 
 | 	struct request *rq = HWGROUP(drive)->rq; | 
 | 	unsigned int reading; | 
 | 	u8 dma_stat; | 
 |  | 
 | 	if (rq_data_dir(rq)) | 
 | 		reading = 0; | 
 | 	else | 
 | 		reading = 1 << 3; | 
 |  | 
 | 	/* fall back to pio! */ | 
 | 	if (!ide_build_dmatable(drive, rq)) { | 
 | 		ide_map_sg(drive, rq); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	/* PRD table */ | 
 | 	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); | 
 |  | 
 | 	/* specify r/w */ | 
 | 	out_be32((void __iomem *)hwif->dma_base, reading); | 
 |  | 
 | 	/* read DMA status for INTR & ERROR flags */ | 
 | 	dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4)); | 
 |  | 
 | 	/* clear INTR & ERROR flags */ | 
 | 	out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); | 
 | 	drive->waiting_for_dma = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void scc_dma_start(ide_drive_t *drive) | 
 | { | 
 | 	ide_hwif_t *hwif = drive->hwif; | 
 | 	u8 dma_cmd = scc_ide_inb(hwif->dma_base); | 
 |  | 
 | 	/* start DMA */ | 
 | 	scc_ide_outb(dma_cmd | 1, hwif->dma_base); | 
 | 	wmb(); | 
 | } | 
 |  | 
 | static int __scc_dma_end(ide_drive_t *drive) | 
 | { | 
 | 	ide_hwif_t *hwif = drive->hwif; | 
 | 	u8 dma_stat, dma_cmd; | 
 |  | 
 | 	drive->waiting_for_dma = 0; | 
 | 	/* get DMA command mode */ | 
 | 	dma_cmd = scc_ide_inb(hwif->dma_base); | 
 | 	/* stop DMA */ | 
 | 	scc_ide_outb(dma_cmd & ~1, hwif->dma_base); | 
 | 	/* get DMA status */ | 
 | 	dma_stat = scc_ide_inb(hwif->dma_base + 4); | 
 | 	/* clear the INTR & ERROR bits */ | 
 | 	scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); | 
 | 	/* purge DMA mappings */ | 
 | 	ide_destroy_dmatable(drive); | 
 | 	/* verify good DMA status */ | 
 | 	wmb(); | 
 | 	return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	scc_dma_end	-	Stop DMA | 
 |  *	@drive: IDE drive | 
 |  * | 
 |  *	Check and clear INT Status register. | 
 |  *	Then call __scc_dma_end(). | 
 |  */ | 
 |  | 
 | static int scc_dma_end(ide_drive_t *drive) | 
 | { | 
 | 	ide_hwif_t *hwif = HWIF(drive); | 
 | 	void __iomem *dma_base = (void __iomem *)hwif->dma_base; | 
 | 	unsigned long intsts_port = hwif->dma_base + 0x014; | 
 | 	u32 reg; | 
 | 	int dma_stat, data_loss = 0; | 
 | 	static int retry = 0; | 
 |  | 
 | 	/* errata A308 workaround: Step5 (check data loss) */ | 
 | 	/* We don't check non ide_disk because it is limited to UDMA4 */ | 
 | 	if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) | 
 | 	      & ATA_ERR) && | 
 | 	    drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { | 
 | 		reg = in_be32((void __iomem *)intsts_port); | 
 | 		if (!(reg & INTSTS_ACTEINT)) { | 
 | 			printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", | 
 | 			       drive->name); | 
 | 			data_loss = 1; | 
 | 			if (retry++) { | 
 | 				struct request *rq = HWGROUP(drive)->rq; | 
 | 				int unit; | 
 | 				/* ERROR_RESET and drive->crc_count are needed | 
 | 				 * to reduce DMA transfer mode in retry process. | 
 | 				 */ | 
 | 				if (rq) | 
 | 					rq->errors |= ERROR_RESET; | 
 | 				for (unit = 0; unit < MAX_DRIVES; unit++) { | 
 | 					ide_drive_t *drive = &hwif->drives[unit]; | 
 | 					drive->crc_count++; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	while (1) { | 
 | 		reg = in_be32((void __iomem *)intsts_port); | 
 |  | 
 | 		if (reg & INTSTS_SERROR) { | 
 | 			printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); | 
 |  | 
 | 			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_PRERR) { | 
 | 			u32 maea0, maec0; | 
 | 			unsigned long ctl_base = hwif->config_data; | 
 |  | 
 | 			maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); | 
 | 			maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); | 
 |  | 
 | 			printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); | 
 |  | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); | 
 |  | 
 | 			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_RERR) { | 
 | 			printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); | 
 |  | 
 | 			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_ICERR) { | 
 | 			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); | 
 |  | 
 | 			printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_BMSINT) { | 
 | 			printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); | 
 |  | 
 | 			ide_do_reset(drive); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_BMHE) { | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_BMHE); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_ACTEINT) { | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (reg & INTSTS_IOIRQS) { | 
 | 			out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); | 
 | 			continue; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	dma_stat = __scc_dma_end(drive); | 
 | 	if (data_loss) | 
 | 		dma_stat |= 2; /* emulate DMA error (to retry command) */ | 
 | 	return dma_stat; | 
 | } | 
 |  | 
 | /* returns 1 if dma irq issued, 0 otherwise */ | 
 | static int scc_dma_test_irq(ide_drive_t *drive) | 
 | { | 
 | 	ide_hwif_t *hwif = HWIF(drive); | 
 | 	u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); | 
 |  | 
 | 	/* SCC errata A252,A308 workaround: Step4 */ | 
 | 	if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) | 
 | 	     & ATA_ERR) && | 
 | 	    (int_stat & INTSTS_INTRQ)) | 
 | 		return 1; | 
 |  | 
 | 	/* SCC errata A308 workaround: Step5 (polling IOIRQS) */ | 
 | 	if (int_stat & INTSTS_IOIRQS) | 
 | 		return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u8 scc_udma_filter(ide_drive_t *drive) | 
 | { | 
 | 	ide_hwif_t *hwif = drive->hwif; | 
 | 	u8 mask = hwif->ultra_mask; | 
 |  | 
 | 	/* errata A308 workaround: limit non ide_disk drive to UDMA4 */ | 
 | 	if ((drive->media != ide_disk) && (mask & 0xE0)) { | 
 | 		printk(KERN_INFO "%s: limit %s to UDMA4\n", | 
 | 		       SCC_PATA_NAME, drive->name); | 
 | 		mask = ATA_UDMA4; | 
 | 	} | 
 |  | 
 | 	return mask; | 
 | } | 
 |  | 
 | /** | 
 |  *	setup_mmio_scc	-	map CTRL/BMID region | 
 |  *	@dev: PCI device we are configuring | 
 |  *	@name: device name | 
 |  * | 
 |  */ | 
 |  | 
 | static int setup_mmio_scc (struct pci_dev *dev, const char *name) | 
 | { | 
 | 	unsigned long ctl_base = pci_resource_start(dev, 0); | 
 | 	unsigned long dma_base = pci_resource_start(dev, 1); | 
 | 	unsigned long ctl_size = pci_resource_len(dev, 0); | 
 | 	unsigned long dma_size = pci_resource_len(dev, 1); | 
 | 	void __iomem *ctl_addr; | 
 | 	void __iomem *dma_addr; | 
 | 	int i, ret; | 
 |  | 
 | 	for (i = 0; i < MAX_HWIFS; i++) { | 
 | 		if (scc_ports[i].ctl == 0) | 
 | 			break; | 
 | 	} | 
 | 	if (i >= MAX_HWIFS) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); | 
 | 	if (ret < 0) { | 
 | 		printk(KERN_ERR "%s: can't reserve resources\n", name); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL) | 
 | 		goto fail_0; | 
 |  | 
 | 	if ((dma_addr = ioremap(dma_base, dma_size)) == NULL) | 
 | 		goto fail_1; | 
 |  | 
 | 	pci_set_master(dev); | 
 | 	scc_ports[i].ctl = (unsigned long)ctl_addr; | 
 | 	scc_ports[i].dma = (unsigned long)dma_addr; | 
 | 	pci_set_drvdata(dev, (void *) &scc_ports[i]); | 
 |  | 
 | 	return 1; | 
 |  | 
 |  fail_1: | 
 | 	iounmap(ctl_addr); | 
 |  fail_0: | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | static int scc_ide_setup_pci_device(struct pci_dev *dev, | 
 | 				    const struct ide_port_info *d) | 
 | { | 
 | 	struct scc_ports *ports = pci_get_drvdata(dev); | 
 | 	struct ide_host *host; | 
 | 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; | 
 | 	int i, rc; | 
 |  | 
 | 	memset(&hw, 0, sizeof(hw)); | 
 | 	for (i = 0; i <= 8; i++) | 
 | 		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; | 
 | 	hw.irq = dev->irq; | 
 | 	hw.dev = &dev->dev; | 
 | 	hw.chipset = ide_pci; | 
 |  | 
 | 	rc = ide_host_add(d, hws, &host); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	ports->host = host; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	init_setup_scc	-	set up an SCC PATA Controller | 
 |  *	@dev: PCI device | 
 |  *	@d: IDE port info | 
 |  * | 
 |  *	Perform the initial set up for this device. | 
 |  */ | 
 |  | 
 | static int __devinit init_setup_scc(struct pci_dev *dev, | 
 | 				    const struct ide_port_info *d) | 
 | { | 
 | 	unsigned long ctl_base; | 
 | 	unsigned long dma_base; | 
 | 	unsigned long cckctrl_port; | 
 | 	unsigned long intmask_port; | 
 | 	unsigned long mode_port; | 
 | 	unsigned long ecmode_port; | 
 | 	u32 reg = 0; | 
 | 	struct scc_ports *ports; | 
 | 	int rc; | 
 |  | 
 | 	rc = pci_enable_device(dev); | 
 | 	if (rc) | 
 | 		goto end; | 
 |  | 
 | 	rc = setup_mmio_scc(dev, d->name); | 
 | 	if (rc < 0) | 
 | 		goto end; | 
 |  | 
 | 	ports = pci_get_drvdata(dev); | 
 | 	ctl_base = ports->ctl; | 
 | 	dma_base = ports->dma; | 
 | 	cckctrl_port = ctl_base + 0xff0; | 
 | 	intmask_port = dma_base + 0x010; | 
 | 	mode_port = ctl_base + 0x024; | 
 | 	ecmode_port = ctl_base + 0xf00; | 
 |  | 
 | 	/* controller initialization */ | 
 | 	reg = 0; | 
 | 	out_be32((void*)cckctrl_port, reg); | 
 | 	reg |= CCKCTRL_ATACLKOEN; | 
 | 	out_be32((void*)cckctrl_port, reg); | 
 | 	reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; | 
 | 	out_be32((void*)cckctrl_port, reg); | 
 | 	reg |= CCKCTRL_CRST; | 
 | 	out_be32((void*)cckctrl_port, reg); | 
 |  | 
 | 	for (;;) { | 
 | 		reg = in_be32((void*)cckctrl_port); | 
 | 		if (reg & CCKCTRL_CRST) | 
 | 			break; | 
 | 		udelay(5000); | 
 | 	} | 
 |  | 
 | 	reg |= CCKCTRL_ATARESET; | 
 | 	out_be32((void*)cckctrl_port, reg); | 
 |  | 
 | 	out_be32((void*)ecmode_port, ECMODE_VALUE); | 
 | 	out_be32((void*)mode_port, MODE_JCUSFEN); | 
 | 	out_be32((void*)intmask_port, INTMASK_MSK); | 
 |  | 
 | 	rc = scc_ide_setup_pci_device(dev, d); | 
 |  | 
 |  end: | 
 | 	return rc; | 
 | } | 
 |  | 
 | static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) | 
 | { | 
 | 	struct ide_io_ports *io_ports = &drive->hwif->io_ports; | 
 | 	struct ide_taskfile *tf = &task->tf; | 
 | 	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_FLAGGED) | 
 | 		HIHI = 0xFF; | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_DATA) | 
 | 		out_be32((void *)io_ports->data_addr, | 
 | 			 (tf->hob_data << 8) | tf->data); | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) | 
 | 		scc_ide_outb(tf->hob_feature, io_ports->feature_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) | 
 | 		scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) | 
 | 		scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) | 
 | 		scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) | 
 | 		scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr); | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) | 
 | 		scc_ide_outb(tf->feature, io_ports->feature_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_NSECT) | 
 | 		scc_ide_outb(tf->nsect, io_ports->nsect_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_LBAL) | 
 | 		scc_ide_outb(tf->lbal, io_ports->lbal_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_LBAM) | 
 | 		scc_ide_outb(tf->lbam, io_ports->lbam_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_LBAH) | 
 | 		scc_ide_outb(tf->lbah, io_ports->lbah_addr); | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) | 
 | 		scc_ide_outb((tf->device & HIHI) | drive->select, | 
 | 			     io_ports->device_addr); | 
 | } | 
 |  | 
 | static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) | 
 | { | 
 | 	struct ide_io_ports *io_ports = &drive->hwif->io_ports; | 
 | 	struct ide_taskfile *tf = &task->tf; | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_DATA) { | 
 | 		u16 data = (u16)in_be32((void *)io_ports->data_addr); | 
 |  | 
 | 		tf->data = data & 0xff; | 
 | 		tf->hob_data = (data >> 8) & 0xff; | 
 | 	} | 
 |  | 
 | 	/* be sure we're looking at the low order bits */ | 
 | 	scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_FEATURE) | 
 | 		tf->feature = scc_ide_inb(io_ports->feature_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_NSECT) | 
 | 		tf->nsect  = scc_ide_inb(io_ports->nsect_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_LBAL) | 
 | 		tf->lbal   = scc_ide_inb(io_ports->lbal_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_LBAM) | 
 | 		tf->lbam   = scc_ide_inb(io_ports->lbam_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_LBAH) | 
 | 		tf->lbah   = scc_ide_inb(io_ports->lbah_addr); | 
 | 	if (task->tf_flags & IDE_TFLAG_IN_DEVICE) | 
 | 		tf->device = scc_ide_inb(io_ports->device_addr); | 
 |  | 
 | 	if (task->tf_flags & IDE_TFLAG_LBA48) { | 
 | 		scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); | 
 |  | 
 | 		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) | 
 | 			tf->hob_feature = scc_ide_inb(io_ports->feature_addr); | 
 | 		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) | 
 | 			tf->hob_nsect   = scc_ide_inb(io_ports->nsect_addr); | 
 | 		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) | 
 | 			tf->hob_lbal    = scc_ide_inb(io_ports->lbal_addr); | 
 | 		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) | 
 | 			tf->hob_lbam    = scc_ide_inb(io_ports->lbam_addr); | 
 | 		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) | 
 | 			tf->hob_lbah    = scc_ide_inb(io_ports->lbah_addr); | 
 | 	} | 
 | } | 
 |  | 
 | static void scc_input_data(ide_drive_t *drive, struct request *rq, | 
 | 			   void *buf, unsigned int len) | 
 | { | 
 | 	unsigned long data_addr = drive->hwif->io_ports.data_addr; | 
 |  | 
 | 	len++; | 
 |  | 
 | 	if (drive->io_32bit) { | 
 | 		scc_ide_insl(data_addr, buf, len / 4); | 
 |  | 
 | 		if ((len & 3) >= 2) | 
 | 			scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); | 
 | 	} else | 
 | 		scc_ide_insw(data_addr, buf, len / 2); | 
 | } | 
 |  | 
 | static void scc_output_data(ide_drive_t *drive,  struct request *rq, | 
 | 			    void *buf, unsigned int len) | 
 | { | 
 | 	unsigned long data_addr = drive->hwif->io_ports.data_addr; | 
 |  | 
 | 	len++; | 
 |  | 
 | 	if (drive->io_32bit) { | 
 | 		scc_ide_outsl(data_addr, buf, len / 4); | 
 |  | 
 | 		if ((len & 3) >= 2) | 
 | 			scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); | 
 | 	} else | 
 | 		scc_ide_outsw(data_addr, buf, len / 2); | 
 | } | 
 |  | 
 | /** | 
 |  *	init_mmio_iops_scc	-	set up the iops for MMIO | 
 |  *	@hwif: interface to set up | 
 |  * | 
 |  */ | 
 |  | 
 | static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) | 
 | { | 
 | 	struct pci_dev *dev = to_pci_dev(hwif->dev); | 
 | 	struct scc_ports *ports = pci_get_drvdata(dev); | 
 | 	unsigned long dma_base = ports->dma; | 
 |  | 
 | 	ide_set_hwifdata(hwif, ports); | 
 |  | 
 | 	hwif->dma_base = dma_base; | 
 | 	hwif->config_data = ports->ctl; | 
 | } | 
 |  | 
 | /** | 
 |  *	init_iops_scc	-	set up iops | 
 |  *	@hwif: interface to set up | 
 |  * | 
 |  *	Do the basic setup for the SCC hardware interface | 
 |  *	and then do the MMIO setup. | 
 |  */ | 
 |  | 
 | static void __devinit init_iops_scc(ide_hwif_t *hwif) | 
 | { | 
 | 	struct pci_dev *dev = to_pci_dev(hwif->dev); | 
 |  | 
 | 	hwif->hwif_data = NULL; | 
 | 	if (pci_get_drvdata(dev) == NULL) | 
 | 		return; | 
 | 	init_mmio_iops_scc(hwif); | 
 | } | 
 |  | 
 | static int __devinit scc_init_dma(ide_hwif_t *hwif, | 
 | 				  const struct ide_port_info *d) | 
 | { | 
 | 	return ide_allocate_dma_engine(hwif); | 
 | } | 
 |  | 
 | static u8 scc_cable_detect(ide_hwif_t *hwif) | 
 | { | 
 | 	return ATA_CBL_PATA80; | 
 | } | 
 |  | 
 | /** | 
 |  *	init_hwif_scc	-	set up hwif | 
 |  *	@hwif: interface to set up | 
 |  * | 
 |  *	We do the basic set up of the interface structure. The SCC | 
 |  *	requires several custom handlers so we override the default | 
 |  *	ide DMA handlers appropriately. | 
 |  */ | 
 |  | 
 | static void __devinit init_hwif_scc(ide_hwif_t *hwif) | 
 | { | 
 | 	/* PTERADD */ | 
 | 	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); | 
 |  | 
 | 	if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) | 
 | 		hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ | 
 | 	else | 
 | 		hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ | 
 | } | 
 |  | 
 | static const struct ide_tp_ops scc_tp_ops = { | 
 | 	.exec_command		= scc_exec_command, | 
 | 	.read_status		= scc_read_status, | 
 | 	.read_altstatus		= scc_read_altstatus, | 
 | 	.read_sff_dma_status	= scc_read_sff_dma_status, | 
 |  | 
 | 	.set_irq		= scc_set_irq, | 
 |  | 
 | 	.tf_load		= scc_tf_load, | 
 | 	.tf_read		= scc_tf_read, | 
 |  | 
 | 	.input_data		= scc_input_data, | 
 | 	.output_data		= scc_output_data, | 
 | }; | 
 |  | 
 | static const struct ide_port_ops scc_port_ops = { | 
 | 	.set_pio_mode		= scc_set_pio_mode, | 
 | 	.set_dma_mode		= scc_set_dma_mode, | 
 | 	.udma_filter		= scc_udma_filter, | 
 | 	.cable_detect		= scc_cable_detect, | 
 | }; | 
 |  | 
 | static const struct ide_dma_ops scc_dma_ops = { | 
 | 	.dma_host_set		= scc_dma_host_set, | 
 | 	.dma_setup		= scc_dma_setup, | 
 | 	.dma_exec_cmd		= ide_dma_exec_cmd, | 
 | 	.dma_start		= scc_dma_start, | 
 | 	.dma_end		= scc_dma_end, | 
 | 	.dma_test_irq		= scc_dma_test_irq, | 
 | 	.dma_lost_irq		= ide_dma_lost_irq, | 
 | 	.dma_timeout		= ide_dma_timeout, | 
 | }; | 
 |  | 
 | #define DECLARE_SCC_DEV(name_str)			\ | 
 |   {							\ | 
 |       .name		= name_str,			\ | 
 |       .init_iops	= init_iops_scc,		\ | 
 |       .init_dma		= scc_init_dma,			\ | 
 |       .init_hwif	= init_hwif_scc,		\ | 
 |       .tp_ops		= &scc_tp_ops,		\ | 
 |       .port_ops		= &scc_port_ops,		\ | 
 |       .dma_ops		= &scc_dma_ops,			\ | 
 |       .host_flags	= IDE_HFLAG_SINGLE,		\ | 
 |       .pio_mask		= ATA_PIO4,			\ | 
 |   } | 
 |  | 
 | static const struct ide_port_info scc_chipsets[] __devinitdata = { | 
 | 	/* 0 */ DECLARE_SCC_DEV("sccIDE"), | 
 | }; | 
 |  | 
 | /** | 
 |  *	scc_init_one	-	pci layer discovery entry | 
 |  *	@dev: PCI device | 
 |  *	@id: ident table entry | 
 |  * | 
 |  *	Called by the PCI code when it finds an SCC PATA controller. | 
 |  *	We then use the IDE PCI generic helper to do most of the work. | 
 |  */ | 
 |  | 
 | static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 
 | { | 
 | 	return init_setup_scc(dev, &scc_chipsets[id->driver_data]); | 
 | } | 
 |  | 
 | /** | 
 |  *	scc_remove	-	pci layer remove entry | 
 |  *	@dev: PCI device | 
 |  * | 
 |  *	Called by the PCI code when it removes an SCC PATA controller. | 
 |  */ | 
 |  | 
 | static void __devexit scc_remove(struct pci_dev *dev) | 
 | { | 
 | 	struct scc_ports *ports = pci_get_drvdata(dev); | 
 | 	struct ide_host *host = ports->host; | 
 |  | 
 | 	ide_host_remove(host); | 
 |  | 
 | 	iounmap((void*)ports->dma); | 
 | 	iounmap((void*)ports->ctl); | 
 | 	pci_release_selected_regions(dev, (1 << 2) - 1); | 
 | 	memset(ports, 0, sizeof(*ports)); | 
 | } | 
 |  | 
 | static const struct pci_device_id scc_pci_tbl[] = { | 
 | 	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, | 
 | 	{ 0, }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(pci, scc_pci_tbl); | 
 |  | 
 | static struct pci_driver scc_pci_driver = { | 
 | 	.name = "SCC IDE", | 
 | 	.id_table = scc_pci_tbl, | 
 | 	.probe = scc_init_one, | 
 | 	.remove = __devexit_p(scc_remove), | 
 | }; | 
 |  | 
 | static int scc_ide_init(void) | 
 | { | 
 | 	return ide_pci_register_driver(&scc_pci_driver); | 
 | } | 
 |  | 
 | module_init(scc_ide_init); | 
 | /* -- No exit code? | 
 | static void scc_ide_exit(void) | 
 | { | 
 | 	ide_pci_unregister_driver(&scc_pci_driver); | 
 | } | 
 | module_exit(scc_ide_exit); | 
 |  */ | 
 |  | 
 |  | 
 | MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); | 
 | MODULE_LICENSE("GPL"); |