| /* | 
 |  * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no> | 
 |  * | 
 |  * The probing code is heavily inspired by cdc_ether, which is: | 
 |  * Copyright (C) 2003-2005 by David Brownell | 
 |  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/cdc.h> | 
 | #include <linux/usb/usbnet.h> | 
 | #include <linux/usb/cdc-wdm.h> | 
 |  | 
 | /* This driver supports wwan (3G/LTE/?) devices using a vendor | 
 |  * specific management protocol called Qualcomm MSM Interface (QMI) - | 
 |  * in addition to the more common AT commands over serial interface | 
 |  * management | 
 |  * | 
 |  * QMI is wrapped in CDC, using CDC encapsulated commands on the | 
 |  * control ("master") interface of a two-interface CDC Union | 
 |  * resembling standard CDC ECM.  The devices do not use the control | 
 |  * interface for any other CDC messages.  Most likely because the | 
 |  * management protocol is used in place of the standard CDC | 
 |  * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE | 
 |  * | 
 |  * Alternatively, control and data functions can be combined in a | 
 |  * single USB interface. | 
 |  * | 
 |  * Handling a protocol like QMI is out of the scope for any driver. | 
 |  * It is exported as a character device using the cdc-wdm driver as | 
 |  * a subdriver, enabling userspace applications ("modem managers") to | 
 |  * handle it. | 
 |  * | 
 |  * These devices may alternatively/additionally be configured using AT | 
 |  * commands on a serial interface | 
 |  */ | 
 |  | 
 | /* driver specific data */ | 
 | struct qmi_wwan_state { | 
 | 	struct usb_driver *subdriver; | 
 | 	atomic_t pmcount; | 
 | 	unsigned long unused; | 
 | 	struct usb_interface *control; | 
 | 	struct usb_interface *data; | 
 | }; | 
 |  | 
 | /* using a counter to merge subdriver requests with our own into a combined state */ | 
 | static int qmi_wwan_manage_power(struct usbnet *dev, int on) | 
 | { | 
 | 	struct qmi_wwan_state *info = (void *)&dev->data; | 
 | 	int rv = 0; | 
 |  | 
 | 	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on); | 
 |  | 
 | 	if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) { | 
 | 		/* need autopm_get/put here to ensure the usbcore sees the new value */ | 
 | 		rv = usb_autopm_get_interface(dev->intf); | 
 | 		if (rv < 0) | 
 | 			goto err; | 
 | 		dev->intf->needs_remote_wakeup = on; | 
 | 		usb_autopm_put_interface(dev->intf); | 
 | 	} | 
 | err: | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on) | 
 | { | 
 | 	struct usbnet *dev = usb_get_intfdata(intf); | 
 |  | 
 | 	/* can be called while disconnecting */ | 
 | 	if (!dev) | 
 | 		return 0; | 
 | 	return qmi_wwan_manage_power(dev, on); | 
 | } | 
 |  | 
 | /* collect all three endpoints and register subdriver */ | 
 | static int qmi_wwan_register_subdriver(struct usbnet *dev) | 
 | { | 
 | 	int rv; | 
 | 	struct usb_driver *subdriver = NULL; | 
 | 	struct qmi_wwan_state *info = (void *)&dev->data; | 
 |  | 
 | 	/* collect bulk endpoints */ | 
 | 	rv = usbnet_get_endpoints(dev, info->data); | 
 | 	if (rv < 0) | 
 | 		goto err; | 
 |  | 
 | 	/* update status endpoint if separate control interface */ | 
 | 	if (info->control != info->data) | 
 | 		dev->status = &info->control->cur_altsetting->endpoint[0]; | 
 |  | 
 | 	/* require interrupt endpoint for subdriver */ | 
 | 	if (!dev->status) { | 
 | 		rv = -EINVAL; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* for subdriver power management */ | 
 | 	atomic_set(&info->pmcount, 0); | 
 |  | 
 | 	/* register subdriver */ | 
 | 	subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc, 4096, &qmi_wwan_cdc_wdm_manage_power); | 
 | 	if (IS_ERR(subdriver)) { | 
 | 		dev_err(&info->control->dev, "subdriver registration failed\n"); | 
 | 		rv = PTR_ERR(subdriver); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* prevent usbnet from using status endpoint */ | 
 | 	dev->status = NULL; | 
 |  | 
 | 	/* save subdriver struct for suspend/resume wrappers */ | 
 | 	info->subdriver = subdriver; | 
 |  | 
 | err: | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) | 
 | { | 
 | 	int status = -1; | 
 | 	u8 *buf = intf->cur_altsetting->extra; | 
 | 	int len = intf->cur_altsetting->extralen; | 
 | 	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc; | 
 | 	struct usb_cdc_union_desc *cdc_union = NULL; | 
 | 	struct usb_cdc_ether_desc *cdc_ether = NULL; | 
 | 	u32 found = 0; | 
 | 	struct usb_driver *driver = driver_of(intf); | 
 | 	struct qmi_wwan_state *info = (void *)&dev->data; | 
 |  | 
 | 	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state))); | 
 |  | 
 | 	/* control and data is shared? */ | 
 | 	if (intf->cur_altsetting->desc.bNumEndpoints == 3) { | 
 | 		info->control = intf; | 
 | 		info->data = intf; | 
 | 		goto shared; | 
 | 	} | 
 |  | 
 | 	/* else require a single interrupt status endpoint on control intf */ | 
 | 	if (intf->cur_altsetting->desc.bNumEndpoints != 1) | 
 | 		goto err; | 
 |  | 
 | 	/* and a number of CDC descriptors */ | 
 | 	while (len > 3) { | 
 | 		struct usb_descriptor_header *h = (void *)buf; | 
 |  | 
 | 		/* ignore any misplaced descriptors */ | 
 | 		if (h->bDescriptorType != USB_DT_CS_INTERFACE) | 
 | 			goto next_desc; | 
 |  | 
 | 		/* buf[2] is CDC descriptor subtype */ | 
 | 		switch (buf[2]) { | 
 | 		case USB_CDC_HEADER_TYPE: | 
 | 			if (found & 1 << USB_CDC_HEADER_TYPE) { | 
 | 				dev_dbg(&intf->dev, "extra CDC header\n"); | 
 | 				goto err; | 
 | 			} | 
 | 			if (h->bLength != sizeof(struct usb_cdc_header_desc)) { | 
 | 				dev_dbg(&intf->dev, "CDC header len %u\n", h->bLength); | 
 | 				goto err; | 
 | 			} | 
 | 			break; | 
 | 		case USB_CDC_UNION_TYPE: | 
 | 			if (found & 1 << USB_CDC_UNION_TYPE) { | 
 | 				dev_dbg(&intf->dev, "extra CDC union\n"); | 
 | 				goto err; | 
 | 			} | 
 | 			if (h->bLength != sizeof(struct usb_cdc_union_desc)) { | 
 | 				dev_dbg(&intf->dev, "CDC union len %u\n", h->bLength); | 
 | 				goto err; | 
 | 			} | 
 | 			cdc_union = (struct usb_cdc_union_desc *)buf; | 
 | 			break; | 
 | 		case USB_CDC_ETHERNET_TYPE: | 
 | 			if (found & 1 << USB_CDC_ETHERNET_TYPE) { | 
 | 				dev_dbg(&intf->dev, "extra CDC ether\n"); | 
 | 				goto err; | 
 | 			} | 
 | 			if (h->bLength != sizeof(struct usb_cdc_ether_desc)) { | 
 | 				dev_dbg(&intf->dev, "CDC ether len %u\n",  h->bLength); | 
 | 				goto err; | 
 | 			} | 
 | 			cdc_ether = (struct usb_cdc_ether_desc *)buf; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Remember which CDC functional descriptors we've seen.  Works | 
 | 		 * for all types we care about, of which USB_CDC_ETHERNET_TYPE | 
 | 		 * (0x0f) is the highest numbered | 
 | 		 */ | 
 | 		if (buf[2] < 32) | 
 | 			found |= 1 << buf[2]; | 
 |  | 
 | next_desc: | 
 | 		len -= h->bLength; | 
 | 		buf += h->bLength; | 
 | 	} | 
 |  | 
 | 	/* did we find all the required ones? */ | 
 | 	if (!(found & (1 << USB_CDC_HEADER_TYPE)) || | 
 | 	    !(found & (1 << USB_CDC_UNION_TYPE))) { | 
 | 		dev_err(&intf->dev, "CDC functional descriptors missing\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* verify CDC Union */ | 
 | 	if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) { | 
 | 		dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* need to save these for unbind */ | 
 | 	info->control = intf; | 
 | 	info->data = usb_ifnum_to_if(dev->udev,	cdc_union->bSlaveInterface0); | 
 | 	if (!info->data) { | 
 | 		dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* errors aren't fatal - we can live with the dynamic address */ | 
 | 	if (cdc_ether) { | 
 | 		dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize); | 
 | 		usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress); | 
 | 	} | 
 |  | 
 | 	/* claim data interface and set it up */ | 
 | 	status = usb_driver_claim_interface(driver, info->data, dev); | 
 | 	if (status < 0) | 
 | 		goto err; | 
 |  | 
 | shared: | 
 | 	status = qmi_wwan_register_subdriver(dev); | 
 | 	if (status < 0 && info->control != info->data) { | 
 | 		usb_set_intfdata(info->data, NULL); | 
 | 		usb_driver_release_interface(driver, info->data); | 
 | 	} | 
 |  | 
 | err: | 
 | 	return status; | 
 | } | 
 |  | 
 | static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) | 
 | { | 
 | 	struct qmi_wwan_state *info = (void *)&dev->data; | 
 | 	struct usb_driver *driver = driver_of(intf); | 
 | 	struct usb_interface *other; | 
 |  | 
 | 	if (info->subdriver && info->subdriver->disconnect) | 
 | 		info->subdriver->disconnect(info->control); | 
 |  | 
 | 	/* allow user to unbind using either control or data */ | 
 | 	if (intf == info->control) | 
 | 		other = info->data; | 
 | 	else | 
 | 		other = info->control; | 
 |  | 
 | 	/* only if not shared */ | 
 | 	if (other && intf != other) { | 
 | 		usb_set_intfdata(other, NULL); | 
 | 		usb_driver_release_interface(driver, other); | 
 | 	} | 
 |  | 
 | 	info->subdriver = NULL; | 
 | 	info->data = NULL; | 
 | 	info->control = NULL; | 
 | } | 
 |  | 
 | /* suspend/resume wrappers calling both usbnet and the cdc-wdm | 
 |  * subdriver if present. | 
 |  * | 
 |  * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide | 
 |  * wrappers for those without adding usbnet reset support first. | 
 |  */ | 
 | static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) | 
 | { | 
 | 	struct usbnet *dev = usb_get_intfdata(intf); | 
 | 	struct qmi_wwan_state *info = (void *)&dev->data; | 
 | 	int ret; | 
 |  | 
 | 	ret = usbnet_suspend(intf, message); | 
 | 	if (ret < 0) | 
 | 		goto err; | 
 |  | 
 | 	if (intf == info->control && info->subdriver && info->subdriver->suspend) | 
 | 		ret = info->subdriver->suspend(intf, message); | 
 | 	if (ret < 0) | 
 | 		usbnet_resume(intf); | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int qmi_wwan_resume(struct usb_interface *intf) | 
 | { | 
 | 	struct usbnet *dev = usb_get_intfdata(intf); | 
 | 	struct qmi_wwan_state *info = (void *)&dev->data; | 
 | 	int ret = 0; | 
 | 	bool callsub = (intf == info->control && info->subdriver && info->subdriver->resume); | 
 |  | 
 | 	if (callsub) | 
 | 		ret = info->subdriver->resume(intf); | 
 | 	if (ret < 0) | 
 | 		goto err; | 
 | 	ret = usbnet_resume(intf); | 
 | 	if (ret < 0 && callsub && info->subdriver->suspend) | 
 | 		info->subdriver->suspend(intf, PMSG_SUSPEND); | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct driver_info	qmi_wwan_info = { | 
 | 	.description	= "WWAN/QMI device", | 
 | 	.flags		= FLAG_WWAN, | 
 | 	.bind		= qmi_wwan_bind, | 
 | 	.unbind		= qmi_wwan_unbind, | 
 | 	.manage_power	= qmi_wwan_manage_power, | 
 | }; | 
 |  | 
 | #define HUAWEI_VENDOR_ID	0x12D1 | 
 |  | 
 | /* map QMI/wwan function by a fixed interface number */ | 
 | #define QMI_FIXED_INTF(vend, prod, num) \ | 
 | 	USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ | 
 | 	.driver_info = (unsigned long)&qmi_wwan_info | 
 |  | 
 | /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ | 
 | #define QMI_GOBI1K_DEVICE(vend, prod) \ | 
 | 	QMI_FIXED_INTF(vend, prod, 3) | 
 |  | 
 | /* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ | 
 | #define QMI_GOBI_DEVICE(vend, prod) \ | 
 | 	QMI_FIXED_INTF(vend, prod, 0) | 
 |  | 
 | static const struct usb_device_id products[] = { | 
 | 	/* 1. CDC ECM like devices match on the control interface */ | 
 | 	{	/* Huawei E392, E398 and possibly others sharing both device id and more... */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 |  | 
 | 	/* 2. Combined interface devices matching on class+protocol */ | 
 | 	{	/* Huawei E367 and possibly others in "Windows mode" */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Huawei E392, E398 and possibly others in "Windows mode" */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Pantech UML290, P4200 and more */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Pantech UML290 - newer firmware */ | 
 | 		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Novatel USB551L and MC551 */ | 
 | 		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001, | 
 | 		                              USB_CLASS_COMM, | 
 | 		                              USB_CDC_SUBCLASS_ETHERNET, | 
 | 		                              USB_CDC_PROTO_NONE), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Novatel E362 */ | 
 | 		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010, | 
 | 		                              USB_CLASS_COMM, | 
 | 		                              USB_CDC_SUBCLASS_ETHERNET, | 
 | 		                              USB_CDC_PROTO_NONE), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Dell Wireless 5800 (Novatel E362) */ | 
 | 		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195, | 
 | 					      USB_CLASS_COMM, | 
 | 					      USB_CDC_SUBCLASS_ETHERNET, | 
 | 					      USB_CDC_PROTO_NONE), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 | 	{	/* Dell Wireless 5800 V2 (Novatel E362) */ | 
 | 		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196, | 
 | 					      USB_CLASS_COMM, | 
 | 					      USB_CDC_SUBCLASS_ETHERNET, | 
 | 					      USB_CDC_PROTO_NONE), | 
 | 		.driver_info        = (unsigned long)&qmi_wwan_info, | 
 | 	}, | 
 |  | 
 | 	/* 3. Combined interface devices matching on interface number */ | 
 | 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */ | 
 | 	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0021, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0025, 1)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0031, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0042, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0049, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0052, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0055, 1)},	/* ZTE (Vodafone) K3520-Z */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0058, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0063, 4)},	/* ZTE (Vodafone) K3565-Z */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0104, 4)},	/* ZTE (Vodafone) K4505-Z */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0113, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0118, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0121, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0123, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0124, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0125, 6)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0126, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0130, 1)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0133, 3)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0141, 5)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0157, 5)},	/* ZTE MF683 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0158, 3)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0167, 4)},	/* ZTE MF820D */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0191, 4)},	/* ZTE EuFi890 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0199, 1)},	/* ZTE MF820S */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0257, 3)},	/* ZTE MF821 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0265, 4)},	/* ONDA MT8205 4G LTE */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0284, 4)},	/* ZTE MF880 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x0326, 4)},	/* ZTE MF821D */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1008, 4)},	/* ZTE (Vodafone) K3570-Z */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1010, 4)},	/* ZTE (Vodafone) K3571-Z */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1012, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1018, 3)},	/* ZTE (Vodafone) K5006-Z */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1021, 2)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1245, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1247, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1252, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1254, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1402, 2)},	/* ZTE MF60 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1425, 2)}, | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x1426, 2)},	/* ZTE MF91 */ | 
 | 	{QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */ | 
 | 	{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */ | 
 | 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */ | 
 | 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */ | 
 | 	{QMI_FIXED_INTF(0x1199, 0x68a2, 19)},	/* Sierra Wireless MC7710 in QMI mode */ | 
 | 	{QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */ | 
 | 	{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},	/* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ | 
 | 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */ | 
 | 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */ | 
 |  | 
 | 	/* 4. Gobi 1000 devices */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */ | 
 | 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */ | 
 |  | 
 | 	/* 5. Gobi 2000 and 3000 devices */ | 
 | 	{QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */ | 
 | 	{QMI_GOBI_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */ | 
 | 	{QMI_GOBI_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x68a5)},	/* Sierra Wireless Modem */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x68a9)},	/* Sierra Wireless Modem */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9011)},	/* Sierra Wireless Gobi 2000 Modem device (MC8305) */ | 
 | 	{QMI_FIXED_INTF(0x1199, 0x9011, 5)},	/* alternate interface number!? */ | 
 | 	{QMI_GOBI_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */ | 
 | 	{QMI_GOBI_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */ | 
 | 	{QMI_GOBI_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */ | 
 | 	{QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */ | 
 | 	{QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */ | 
 | 	{QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel E396) */ | 
 |  | 
 | 	{ }					/* END */ | 
 | }; | 
 | MODULE_DEVICE_TABLE(usb, products); | 
 |  | 
 | static int qmi_wwan_probe(struct usb_interface *intf, const struct usb_device_id *prod) | 
 | { | 
 | 	struct usb_device_id *id = (struct usb_device_id *)prod; | 
 |  | 
 | 	/* Workaround to enable dynamic IDs.  This disables usbnet | 
 | 	 * blacklisting functionality.  Which, if required, can be | 
 | 	 * reimplemented here by using a magic "blacklist" value | 
 | 	 * instead of 0 in the static device id table | 
 | 	 */ | 
 | 	if (!id->driver_info) { | 
 | 		dev_dbg(&intf->dev, "setting defaults for dynamic device id\n"); | 
 | 		id->driver_info = (unsigned long)&qmi_wwan_info; | 
 | 	} | 
 |  | 
 | 	return usbnet_probe(intf, id); | 
 | } | 
 |  | 
 | static struct usb_driver qmi_wwan_driver = { | 
 | 	.name		      = "qmi_wwan", | 
 | 	.id_table	      = products, | 
 | 	.probe		      = qmi_wwan_probe, | 
 | 	.disconnect	      = usbnet_disconnect, | 
 | 	.suspend	      = qmi_wwan_suspend, | 
 | 	.resume		      =	qmi_wwan_resume, | 
 | 	.reset_resume         = qmi_wwan_resume, | 
 | 	.supports_autosuspend = 1, | 
 | 	.disable_hub_initiated_lpm = 1, | 
 | }; | 
 |  | 
 | module_usb_driver(qmi_wwan_driver); | 
 |  | 
 | MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>"); | 
 | MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver"); | 
 | MODULE_LICENSE("GPL"); |