| menuconfig NEW_LEDS | |
| bool "LED Support" | |
| help | |
| Say Y to enable Linux LED support. This allows control of supported | |
| LEDs from both userspace and optionally, by kernel events (triggers). | |
| This is not related to standard keyboard LEDs which are controlled | |
| via the input system. | |
| if NEW_LEDS | |
| config LEDS_CLASS | |
| tristate "LED Class Support" | |
| help | |
| This option enables the led sysfs class in /sys/class/leds. You'll | |
| need this to do anything useful with LEDs. If unsure, say N. | |
| comment "LED drivers" | |
| config LEDS_ATMEL_PWM | |
| tristate "LED Support using Atmel PWM outputs" | |
| depends on LEDS_CLASS && ATMEL_PWM | |
| help | |
| This option enables support for LEDs driven using outputs | |
| of the dedicated PWM controller found on newer Atmel SOCs. | |
| config LEDS_CORGI | |
| tristate "LED Support for the Sharp SL-C7x0 series" | |
| depends on LEDS_CLASS && PXA_SHARP_C7xx | |
| help | |
| This option enables support for the LEDs on Sharp Zaurus | |
| SL-C7x0 series (C700, C750, C760, C860). | |
| config LEDS_LOCOMO | |
| tristate "LED Support for Locomo device" | |
| depends on LEDS_CLASS && SHARP_LOCOMO | |
| help | |
| This option enables support for the LEDs on Sharp Locomo. | |
| Zaurus models SL-5500 and SL-5600. | |
| config LEDS_SPITZ | |
| tristate "LED Support for the Sharp SL-Cxx00 series" | |
| depends on LEDS_CLASS && PXA_SHARP_Cxx00 | |
| help | |
| This option enables support for the LEDs on Sharp Zaurus | |
| SL-Cxx00 series (C1000, C3000, C3100). | |
| config LEDS_S3C24XX | |
| tristate "LED Support for Samsung S3C24XX GPIO LEDs" | |
| depends on LEDS_CLASS && ARCH_S3C2410 | |
| help | |
| This option enables support for LEDs connected to GPIO lines | |
| on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. | |
| config LEDS_AMS_DELTA | |
| tristate "LED Support for the Amstrad Delta (E3)" | |
| depends on LEDS_CLASS && MACH_AMS_DELTA | |
| help | |
| This option enables support for the LEDs on Amstrad Delta (E3). | |
| config LEDS_NET48XX | |
| tristate "LED Support for Soekris net48xx series Error LED" | |
| depends on LEDS_CLASS && SCx200_GPIO | |
| help | |
| This option enables support for the Soekris net4801 and net4826 error | |
| LED. | |
| config LEDS_FSG | |
| tristate "LED Support for the Freecom FSG-3" | |
| depends on LEDS_CLASS && MACH_FSG | |
| help | |
| This option enables support for the LEDs on the Freecom FSG-3. | |
| config LEDS_WRAP | |
| tristate "LED Support for the WRAP series LEDs" | |
| depends on LEDS_CLASS && SCx200_GPIO | |
| help | |
| This option enables support for the PCEngines WRAP programmable LEDs. | |
| config LEDS_H1940 | |
| tristate "LED Support for iPAQ H1940 device" | |
| depends on LEDS_CLASS && ARCH_H1940 | |
| help | |
| This option enables support for the LEDs on the h1940. | |
| config LEDS_COBALT_QUBE | |
| tristate "LED Support for the Cobalt Qube series front LED" | |
| depends on LEDS_CLASS && MIPS_COBALT | |
| help | |
| This option enables support for the front LED on Cobalt Qube series | |
| config LEDS_COBALT_RAQ | |
| bool "LED Support for the Cobalt Raq series" | |
| depends on LEDS_CLASS && MIPS_COBALT | |
| select LEDS_TRIGGERS | |
| help | |
| This option enables support for the Cobalt Raq series LEDs. | |
| config LEDS_HP6XX | |
| tristate "LED Support for the HP Jornada 6xx" | |
| depends on LEDS_CLASS && SH_HP6XX | |
| help | |
| This option enables led support for the handheld | |
| HP Jornada 620/660/680/690. | |
| config LEDS_GPIO | |
| tristate "LED Support for GPIO connected LEDs" | |
| depends on LEDS_CLASS && GENERIC_GPIO | |
| help | |
| This option enables support for the LEDs connected to GPIO | |
| outputs. To be useful the particular board must have LEDs | |
| and they must be connected to the GPIO lines. | |
| config LEDS_CM_X270 | |
| tristate "LED Support for the CM-X270 LEDs" | |
| depends on LEDS_CLASS && MACH_ARMCORE | |
| help | |
| This option enables support for the CM-X270 LEDs. | |
| config LEDS_CLEVO_MAIL | |
| tristate "Mail LED on Clevo notebook (EXPERIMENTAL)" | |
| depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL | |
| help | |
| This driver makes the mail LED accessible from userspace | |
| programs through the leds subsystem. This LED have three | |
| known mode: off, blink at 0.5Hz and blink at 1Hz. | |
| The driver supports two kinds of interface: using ledtrig-timer | |
| or through /sys/class/leds/clevo::mail/brightness. As this LED | |
| cannot change it's brightness it blinks instead. The brightness | |
| value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means | |
| blink at 1Hz. | |
| This module can drive the mail LED for the following notebooks: | |
| Clevo D400P | |
| Clevo D410J | |
| Clevo D410V | |
| Clevo D400V/D470V (not tested, but might work) | |
| Clevo M540N | |
| Clevo M5x0N (not tested, but might work) | |
| Positivo Mobile (Clevo M5x0V) | |
| If your model is not listed here you can try the "nodetect" | |
| module paramter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called leds-clevo-mail. | |
| comment "LED Triggers" | |
| config LEDS_TRIGGERS | |
| bool "LED Trigger support" | |
| help | |
| This option enables trigger support for the leds class. | |
| These triggers allow kernel events to drive the LEDs and can | |
| be configured via sysfs. If unsure, say Y. | |
| config LEDS_TRIGGER_TIMER | |
| tristate "LED Timer Trigger" | |
| depends on LEDS_TRIGGERS | |
| help | |
| This allows LEDs to be controlled by a programmable timer | |
| via sysfs. Some LED hardware can be programmed to start | |
| blinking the LED without any further software interaction. | |
| For more details read Documentation/leds-class.txt. | |
| If unsure, say Y. | |
| config LEDS_TRIGGER_IDE_DISK | |
| bool "LED IDE Disk Trigger" | |
| depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK | |
| help | |
| This allows LEDs to be controlled by IDE disk activity. | |
| If unsure, say Y. | |
| config LEDS_TRIGGER_HEARTBEAT | |
| tristate "LED Heartbeat Trigger" | |
| depends on LEDS_TRIGGERS | |
| help | |
| This allows LEDs to be controlled by a CPU load average. | |
| The flash frequency is a hyperbolic function of the 1-minute | |
| load average. | |
| If unsure, say Y. | |
| config LEDS_TRIGGER_DEFAULT_ON | |
| tristate "LED Default ON Trigger" | |
| depends on LEDS_TRIGGERS | |
| help | |
| This allows LEDs to be initialised in the ON state. | |
| If unsure, say Y. | |
| endif # NEW_LEDS |