| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/string.h> | |
| #include <linux/bitops.h> | |
| #include <linux/smp.h> | |
| #include <linux/thread_info.h> | |
| #include <linux/module.h> | |
| #include <asm/processor.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/msr.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/ds.h> | |
| #include <asm/bugs.h> | |
| #include "cpu.h" | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| #include <asm/mpspec.h> | |
| #include <asm/apic.h> | |
| #include <mach_apic.h> | |
| #endif | |
| #ifdef CONFIG_X86_INTEL_USERCOPY | |
| /* | |
| * Alignment at which movsl is preferred for bulk memory copies. | |
| */ | |
| struct movsl_mask movsl_mask __read_mostly; | |
| #endif | |
| static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) | |
| { | |
| /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ | |
| if (c->x86 == 15 && c->x86_cache_alignment == 64) | |
| c->x86_cache_alignment = 128; | |
| if ((c->x86 == 0xf && c->x86_model >= 0x03) || | |
| (c->x86 == 0x6 && c->x86_model >= 0x0e)) | |
| set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); | |
| } | |
| /* | |
| * Early probe support logic for ppro memory erratum #50 | |
| * | |
| * This is called before we do cpu ident work | |
| */ | |
| int __cpuinit ppro_with_ram_bug(void) | |
| { | |
| /* Uses data from early_cpu_detect now */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && | |
| boot_cpu_data.x86 == 6 && | |
| boot_cpu_data.x86_model == 1 && | |
| boot_cpu_data.x86_mask < 8) { | |
| printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n"); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * P4 Xeon errata 037 workaround. | |
| * Hardware prefetcher may cause stale data to be loaded into the cache. | |
| */ | |
| static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) | |
| { | |
| unsigned long lo, hi; | |
| if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { | |
| rdmsr(MSR_IA32_MISC_ENABLE, lo, hi); | |
| if ((lo & (1<<9)) == 0) { | |
| printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n"); | |
| printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n"); | |
| lo |= (1<<9); /* Disable hw prefetching */ | |
| wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); | |
| } | |
| } | |
| } | |
| /* | |
| * find out the number of processor cores on the die | |
| */ | |
| static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int eax, ebx, ecx, edx; | |
| if (c->cpuid_level < 4) | |
| return 1; | |
| /* Intel has a non-standard dependency on %ecx for this CPUID level. */ | |
| cpuid_count(4, 0, &eax, &ebx, &ecx, &edx); | |
| if (eax & 0x1f) | |
| return ((eax >> 26) + 1); | |
| else | |
| return 1; | |
| } | |
| #ifdef CONFIG_X86_F00F_BUG | |
| static void __cpuinit trap_init_f00f_bug(void) | |
| { | |
| __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); | |
| /* | |
| * Update the IDT descriptor and reload the IDT so that | |
| * it uses the read-only mapped virtual address. | |
| */ | |
| idt_descr.address = fix_to_virt(FIX_F00F_IDT); | |
| load_idt(&idt_descr); | |
| } | |
| #endif | |
| static void __cpuinit init_intel(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int l2 = 0; | |
| char *p = NULL; | |
| early_init_intel(c); | |
| #ifdef CONFIG_X86_F00F_BUG | |
| /* | |
| * All current models of Pentium and Pentium with MMX technology CPUs | |
| * have the F0 0F bug, which lets nonprivileged users lock up the system. | |
| * Note that the workaround only should be initialized once... | |
| */ | |
| c->f00f_bug = 0; | |
| if (!paravirt_enabled() && c->x86 == 5) { | |
| static int f00f_workaround_enabled; | |
| c->f00f_bug = 1; | |
| if (!f00f_workaround_enabled) { | |
| trap_init_f00f_bug(); | |
| printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); | |
| f00f_workaround_enabled = 1; | |
| } | |
| } | |
| #endif | |
| l2 = init_intel_cacheinfo(c); | |
| if (c->cpuid_level > 9) { | |
| unsigned eax = cpuid_eax(10); | |
| /* Check for version and the number of counters */ | |
| if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) | |
| set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); | |
| } | |
| /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ | |
| if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) | |
| clear_cpu_cap(c, X86_FEATURE_SEP); | |
| /* | |
| * Names for the Pentium II/Celeron processors | |
| * detectable only by also checking the cache size. | |
| * Dixon is NOT a Celeron. | |
| */ | |
| if (c->x86 == 6) { | |
| switch (c->x86_model) { | |
| case 5: | |
| if (c->x86_mask == 0) { | |
| if (l2 == 0) | |
| p = "Celeron (Covington)"; | |
| else if (l2 == 256) | |
| p = "Mobile Pentium II (Dixon)"; | |
| } | |
| break; | |
| case 6: | |
| if (l2 == 128) | |
| p = "Celeron (Mendocino)"; | |
| else if (c->x86_mask == 0 || c->x86_mask == 5) | |
| p = "Celeron-A"; | |
| break; | |
| case 8: | |
| if (l2 == 128) | |
| p = "Celeron (Coppermine)"; | |
| break; | |
| } | |
| } | |
| if (p) | |
| strcpy(c->x86_model_id, p); | |
| c->x86_max_cores = num_cpu_cores(c); | |
| detect_ht(c); | |
| /* Work around errata */ | |
| Intel_errata_workarounds(c); | |
| #ifdef CONFIG_X86_INTEL_USERCOPY | |
| /* | |
| * Set up the preferred alignment for movsl bulk memory moves | |
| */ | |
| switch (c->x86) { | |
| case 4: /* 486: untested */ | |
| break; | |
| case 5: /* Old Pentia: untested */ | |
| break; | |
| case 6: /* PII/PIII only like movsl with 8-byte alignment */ | |
| movsl_mask.mask = 7; | |
| break; | |
| case 15: /* P4 is OK down to 8-byte alignment */ | |
| movsl_mask.mask = 7; | |
| break; | |
| } | |
| #endif | |
| if (cpu_has_xmm2) | |
| set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); | |
| if (c->x86 == 15) { | |
| set_cpu_cap(c, X86_FEATURE_P4); | |
| } | |
| if (c->x86 == 6) | |
| set_cpu_cap(c, X86_FEATURE_P3); | |
| if (cpu_has_ds) { | |
| unsigned int l1; | |
| rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); | |
| if (!(l1 & (1<<11))) | |
| set_cpu_cap(c, X86_FEATURE_BTS); | |
| if (!(l1 & (1<<12))) | |
| set_cpu_cap(c, X86_FEATURE_PEBS); | |
| } | |
| if (cpu_has_bts) | |
| ds_init_intel(c); | |
| } | |
| static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size) | |
| { | |
| /* | |
| * Intel PIII Tualatin. This comes in two flavours. | |
| * One has 256kb of cache, the other 512. We have no way | |
| * to determine which, so we use a boottime override | |
| * for the 512kb model, and assume 256 otherwise. | |
| */ | |
| if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0)) | |
| size = 256; | |
| return size; | |
| } | |
| static struct cpu_dev intel_cpu_dev __cpuinitdata = { | |
| .c_vendor = "Intel", | |
| .c_ident = { "GenuineIntel" }, | |
| .c_models = { | |
| { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = | |
| { | |
| [0] = "486 DX-25/33", | |
| [1] = "486 DX-50", | |
| [2] = "486 SX", | |
| [3] = "486 DX/2", | |
| [4] = "486 SL", | |
| [5] = "486 SX/2", | |
| [7] = "486 DX/2-WB", | |
| [8] = "486 DX/4", | |
| [9] = "486 DX/4-WB" | |
| } | |
| }, | |
| { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names = | |
| { | |
| [0] = "Pentium 60/66 A-step", | |
| [1] = "Pentium 60/66", | |
| [2] = "Pentium 75 - 200", | |
| [3] = "OverDrive PODP5V83", | |
| [4] = "Pentium MMX", | |
| [7] = "Mobile Pentium 75 - 200", | |
| [8] = "Mobile Pentium MMX" | |
| } | |
| }, | |
| { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names = | |
| { | |
| [0] = "Pentium Pro A-step", | |
| [1] = "Pentium Pro", | |
| [3] = "Pentium II (Klamath)", | |
| [4] = "Pentium II (Deschutes)", | |
| [5] = "Pentium II (Deschutes)", | |
| [6] = "Mobile Pentium II", | |
| [7] = "Pentium III (Katmai)", | |
| [8] = "Pentium III (Coppermine)", | |
| [10] = "Pentium III (Cascades)", | |
| [11] = "Pentium III (Tualatin)", | |
| } | |
| }, | |
| { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names = | |
| { | |
| [0] = "Pentium 4 (Unknown)", | |
| [1] = "Pentium 4 (Willamette)", | |
| [2] = "Pentium 4 (Northwood)", | |
| [4] = "Pentium 4 (Foster)", | |
| [5] = "Pentium 4 (Foster)", | |
| } | |
| }, | |
| }, | |
| .c_early_init = early_init_intel, | |
| .c_init = init_intel, | |
| .c_size_cache = intel_size_cache, | |
| }; | |
| cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); | |
| #ifndef CONFIG_X86_CMPXCHG | |
| unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) | |
| { | |
| u8 prev; | |
| unsigned long flags; | |
| /* Poor man's cmpxchg for 386. Unsuitable for SMP */ | |
| local_irq_save(flags); | |
| prev = *(u8 *)ptr; | |
| if (prev == old) | |
| *(u8 *)ptr = new; | |
| local_irq_restore(flags); | |
| return prev; | |
| } | |
| EXPORT_SYMBOL(cmpxchg_386_u8); | |
| unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) | |
| { | |
| u16 prev; | |
| unsigned long flags; | |
| /* Poor man's cmpxchg for 386. Unsuitable for SMP */ | |
| local_irq_save(flags); | |
| prev = *(u16 *)ptr; | |
| if (prev == old) | |
| *(u16 *)ptr = new; | |
| local_irq_restore(flags); | |
| return prev; | |
| } | |
| EXPORT_SYMBOL(cmpxchg_386_u16); | |
| unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) | |
| { | |
| u32 prev; | |
| unsigned long flags; | |
| /* Poor man's cmpxchg for 386. Unsuitable for SMP */ | |
| local_irq_save(flags); | |
| prev = *(u32 *)ptr; | |
| if (prev == old) | |
| *(u32 *)ptr = new; | |
| local_irq_restore(flags); | |
| return prev; | |
| } | |
| EXPORT_SYMBOL(cmpxchg_386_u32); | |
| #endif | |
| #ifndef CONFIG_X86_CMPXCHG64 | |
| unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new) | |
| { | |
| u64 prev; | |
| unsigned long flags; | |
| /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */ | |
| local_irq_save(flags); | |
| prev = *(u64 *)ptr; | |
| if (prev == old) | |
| *(u64 *)ptr = new; | |
| local_irq_restore(flags); | |
| return prev; | |
| } | |
| EXPORT_SYMBOL(cmpxchg_486_u64); | |
| #endif | |
| /* arch_initcall(intel_cpu_init); */ | |