| #include <linux/init.h> | |
| #include <linux/string.h> | |
| #include <linux/delay.h> | |
| #include <linux/smp.h> | |
| #include <linux/module.h> | |
| #include <linux/percpu.h> | |
| #include <linux/bootmem.h> | |
| #include <asm/processor.h> | |
| #include <asm/i387.h> | |
| #include <asm/msr.h> | |
| #include <asm/io.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/mce.h> | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| #include <asm/mpspec.h> | |
| #include <asm/apic.h> | |
| #include <mach_apic.h> | |
| #endif | |
| #include "cpu.h" | |
| DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { | |
| [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, | |
| [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, | |
| [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, | |
| [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } }, | |
| /* | |
| * Segments used for calling PnP BIOS have byte granularity. | |
| * They code segments and data segments have fixed 64k limits, | |
| * the transfer segment sizes are set at run time. | |
| */ | |
| /* 32-bit code */ | |
| [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } }, | |
| /* 16-bit code */ | |
| [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } }, | |
| /* 16-bit data */ | |
| [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } }, | |
| /* 16-bit data */ | |
| [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } }, | |
| /* 16-bit data */ | |
| [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } }, | |
| /* | |
| * The APM segments have byte granularity and their bases | |
| * are set at run time. All have 64k limits. | |
| */ | |
| /* 32-bit code */ | |
| [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } }, | |
| /* 16-bit code */ | |
| [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } }, | |
| /* data */ | |
| [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, | |
| [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, | |
| [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, | |
| } }; | |
| EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); | |
| __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; | |
| static int cachesize_override __cpuinitdata = -1; | |
| static int disable_x86_serial_nr __cpuinitdata = 1; | |
| struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; | |
| static void __cpuinit default_init(struct cpuinfo_x86 *c) | |
| { | |
| /* Not much we can do here... */ | |
| /* Check if at least it has cpuid */ | |
| if (c->cpuid_level == -1) { | |
| /* No cpuid. It must be an ancient CPU */ | |
| if (c->x86 == 4) | |
| strcpy(c->x86_model_id, "486"); | |
| else if (c->x86 == 3) | |
| strcpy(c->x86_model_id, "386"); | |
| } | |
| } | |
| static struct cpu_dev __cpuinitdata default_cpu = { | |
| .c_init = default_init, | |
| .c_vendor = "Unknown", | |
| }; | |
| static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; | |
| static int __init cachesize_setup(char *str) | |
| { | |
| get_option(&str, &cachesize_override); | |
| return 1; | |
| } | |
| __setup("cachesize=", cachesize_setup); | |
| int __cpuinit get_model_name(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int *v; | |
| char *p, *q; | |
| if (cpuid_eax(0x80000000) < 0x80000004) | |
| return 0; | |
| v = (unsigned int *) c->x86_model_id; | |
| cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); | |
| cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); | |
| cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); | |
| c->x86_model_id[48] = 0; | |
| /* Intel chips right-justify this string for some dumb reason; | |
| undo that brain damage */ | |
| p = q = &c->x86_model_id[0]; | |
| while (*p == ' ') | |
| p++; | |
| if (p != q) { | |
| while (*p) | |
| *q++ = *p++; | |
| while (q <= &c->x86_model_id[48]) | |
| *q++ = '\0'; /* Zero-pad the rest */ | |
| } | |
| return 1; | |
| } | |
| void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int n, dummy, ecx, edx, l2size; | |
| n = cpuid_eax(0x80000000); | |
| if (n >= 0x80000005) { | |
| cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); | |
| printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", | |
| edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); | |
| c->x86_cache_size = (ecx>>24)+(edx>>24); | |
| } | |
| if (n < 0x80000006) /* Some chips just has a large L1. */ | |
| return; | |
| ecx = cpuid_ecx(0x80000006); | |
| l2size = ecx >> 16; | |
| /* do processor-specific cache resizing */ | |
| if (this_cpu->c_size_cache) | |
| l2size = this_cpu->c_size_cache(c, l2size); | |
| /* Allow user to override all this if necessary. */ | |
| if (cachesize_override != -1) | |
| l2size = cachesize_override; | |
| if (l2size == 0) | |
| return; /* Again, no L2 cache is possible */ | |
| c->x86_cache_size = l2size; | |
| printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", | |
| l2size, ecx & 0xFF); | |
| } | |
| /* | |
| * Naming convention should be: <Name> [(<Codename>)] | |
| * This table only is used unless init_<vendor>() below doesn't set it; | |
| * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used | |
| * | |
| */ | |
| /* Look up CPU names by table lookup. */ | |
| static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) | |
| { | |
| struct cpu_model_info *info; | |
| if (c->x86_model >= 16) | |
| return NULL; /* Range check */ | |
| if (!this_cpu) | |
| return NULL; | |
| info = this_cpu->c_models; | |
| while (info && info->family) { | |
| if (info->family == c->x86) | |
| return info->model_names[c->x86_model]; | |
| info++; | |
| } | |
| return NULL; /* Not found */ | |
| } | |
| static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) | |
| { | |
| char *v = c->x86_vendor_id; | |
| int i; | |
| static int printed; | |
| for (i = 0; i < X86_VENDOR_NUM; i++) { | |
| if (cpu_devs[i]) { | |
| if (!strcmp(v, cpu_devs[i]->c_ident[0]) || | |
| (cpu_devs[i]->c_ident[1] && | |
| !strcmp(v, cpu_devs[i]->c_ident[1]))) { | |
| c->x86_vendor = i; | |
| if (!early) | |
| this_cpu = cpu_devs[i]; | |
| return; | |
| } | |
| } | |
| } | |
| if (!printed) { | |
| printed++; | |
| printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); | |
| printk(KERN_ERR "CPU: Your system may be unstable.\n"); | |
| } | |
| c->x86_vendor = X86_VENDOR_UNKNOWN; | |
| this_cpu = &default_cpu; | |
| } | |
| static int __init x86_fxsr_setup(char *s) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_FXSR); | |
| setup_clear_cpu_cap(X86_FEATURE_XMM); | |
| return 1; | |
| } | |
| __setup("nofxsr", x86_fxsr_setup); | |
| static int __init x86_sep_setup(char *s) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_SEP); | |
| return 1; | |
| } | |
| __setup("nosep", x86_sep_setup); | |
| /* Standard macro to see if a specific flag is changeable */ | |
| static inline int flag_is_changeable_p(u32 flag) | |
| { | |
| u32 f1, f2; | |
| asm("pushfl\n\t" | |
| "pushfl\n\t" | |
| "popl %0\n\t" | |
| "movl %0,%1\n\t" | |
| "xorl %2,%0\n\t" | |
| "pushl %0\n\t" | |
| "popfl\n\t" | |
| "pushfl\n\t" | |
| "popl %0\n\t" | |
| "popfl\n\t" | |
| : "=&r" (f1), "=&r" (f2) | |
| : "ir" (flag)); | |
| return ((f1^f2) & flag) != 0; | |
| } | |
| /* Probe for the CPUID instruction */ | |
| static int __cpuinit have_cpuid_p(void) | |
| { | |
| return flag_is_changeable_p(X86_EFLAGS_ID); | |
| } | |
| void __init cpu_detect(struct cpuinfo_x86 *c) | |
| { | |
| /* Get vendor name */ | |
| cpuid(0x00000000, (unsigned int *)&c->cpuid_level, | |
| (unsigned int *)&c->x86_vendor_id[0], | |
| (unsigned int *)&c->x86_vendor_id[8], | |
| (unsigned int *)&c->x86_vendor_id[4]); | |
| c->x86 = 4; | |
| if (c->cpuid_level >= 0x00000001) { | |
| u32 junk, tfms, cap0, misc; | |
| cpuid(0x00000001, &tfms, &misc, &junk, &cap0); | |
| c->x86 = (tfms >> 8) & 15; | |
| c->x86_model = (tfms >> 4) & 15; | |
| if (c->x86 == 0xf) | |
| c->x86 += (tfms >> 20) & 0xff; | |
| if (c->x86 >= 0x6) | |
| c->x86_model += ((tfms >> 16) & 0xF) << 4; | |
| c->x86_mask = tfms & 15; | |
| if (cap0 & (1<<19)) { | |
| c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; | |
| c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; | |
| } | |
| } | |
| } | |
| static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) | |
| { | |
| u32 tfms, xlvl; | |
| unsigned int ebx; | |
| memset(&c->x86_capability, 0, sizeof c->x86_capability); | |
| if (have_cpuid_p()) { | |
| /* Intel-defined flags: level 0x00000001 */ | |
| if (c->cpuid_level >= 0x00000001) { | |
| u32 capability, excap; | |
| cpuid(0x00000001, &tfms, &ebx, &excap, &capability); | |
| c->x86_capability[0] = capability; | |
| c->x86_capability[4] = excap; | |
| } | |
| /* AMD-defined flags: level 0x80000001 */ | |
| xlvl = cpuid_eax(0x80000000); | |
| if ((xlvl & 0xffff0000) == 0x80000000) { | |
| if (xlvl >= 0x80000001) { | |
| c->x86_capability[1] = cpuid_edx(0x80000001); | |
| c->x86_capability[6] = cpuid_ecx(0x80000001); | |
| } | |
| } | |
| } | |
| clear_cpu_cap(c, X86_FEATURE_PAT); | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| if (c->x86 >= 0xf && c->x86 <= 0x11) | |
| set_cpu_cap(c, X86_FEATURE_PAT); | |
| break; | |
| case X86_VENDOR_INTEL: | |
| if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) | |
| set_cpu_cap(c, X86_FEATURE_PAT); | |
| break; | |
| } | |
| } | |
| /* | |
| * Do minimum CPU detection early. | |
| * Fields really needed: vendor, cpuid_level, family, model, mask, | |
| * cache alignment. | |
| * The others are not touched to avoid unwanted side effects. | |
| * | |
| * WARNING: this function is only called on the BP. Don't add code here | |
| * that is supposed to run on all CPUs. | |
| */ | |
| static void __init early_cpu_detect(void) | |
| { | |
| struct cpuinfo_x86 *c = &boot_cpu_data; | |
| c->x86_cache_alignment = 32; | |
| c->x86_clflush_size = 32; | |
| if (!have_cpuid_p()) | |
| return; | |
| cpu_detect(c); | |
| get_cpu_vendor(c, 1); | |
| if (c->x86_vendor != X86_VENDOR_UNKNOWN && | |
| cpu_devs[c->x86_vendor]->c_early_init) | |
| cpu_devs[c->x86_vendor]->c_early_init(c); | |
| early_get_cap(c); | |
| } | |
| static void __cpuinit generic_identify(struct cpuinfo_x86 *c) | |
| { | |
| u32 tfms, xlvl; | |
| unsigned int ebx; | |
| if (have_cpuid_p()) { | |
| /* Get vendor name */ | |
| cpuid(0x00000000, (unsigned int *)&c->cpuid_level, | |
| (unsigned int *)&c->x86_vendor_id[0], | |
| (unsigned int *)&c->x86_vendor_id[8], | |
| (unsigned int *)&c->x86_vendor_id[4]); | |
| get_cpu_vendor(c, 0); | |
| /* Initialize the standard set of capabilities */ | |
| /* Note that the vendor-specific code below might override */ | |
| /* Intel-defined flags: level 0x00000001 */ | |
| if (c->cpuid_level >= 0x00000001) { | |
| u32 capability, excap; | |
| cpuid(0x00000001, &tfms, &ebx, &excap, &capability); | |
| c->x86_capability[0] = capability; | |
| c->x86_capability[4] = excap; | |
| c->x86 = (tfms >> 8) & 15; | |
| c->x86_model = (tfms >> 4) & 15; | |
| if (c->x86 == 0xf) | |
| c->x86 += (tfms >> 20) & 0xff; | |
| if (c->x86 >= 0x6) | |
| c->x86_model += ((tfms >> 16) & 0xF) << 4; | |
| c->x86_mask = tfms & 15; | |
| c->initial_apicid = (ebx >> 24) & 0xFF; | |
| #ifdef CONFIG_X86_HT | |
| c->apicid = phys_pkg_id(c->initial_apicid, 0); | |
| c->phys_proc_id = c->initial_apicid; | |
| #else | |
| c->apicid = c->initial_apicid; | |
| #endif | |
| if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) | |
| c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; | |
| } else { | |
| /* Have CPUID level 0 only - unheard of */ | |
| c->x86 = 4; | |
| } | |
| /* AMD-defined flags: level 0x80000001 */ | |
| xlvl = cpuid_eax(0x80000000); | |
| if ((xlvl & 0xffff0000) == 0x80000000) { | |
| if (xlvl >= 0x80000001) { | |
| c->x86_capability[1] = cpuid_edx(0x80000001); | |
| c->x86_capability[6] = cpuid_ecx(0x80000001); | |
| } | |
| if (xlvl >= 0x80000004) | |
| get_model_name(c); /* Default name */ | |
| } | |
| init_scattered_cpuid_features(c); | |
| } | |
| clear_cpu_cap(c, X86_FEATURE_PAT); | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| if (c->x86 >= 0xf && c->x86 <= 0x11) | |
| set_cpu_cap(c, X86_FEATURE_PAT); | |
| break; | |
| case X86_VENDOR_INTEL: | |
| if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) | |
| set_cpu_cap(c, X86_FEATURE_PAT); | |
| break; | |
| } | |
| } | |
| static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) | |
| { | |
| if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { | |
| /* Disable processor serial number */ | |
| unsigned long lo, hi; | |
| rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); | |
| lo |= 0x200000; | |
| wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); | |
| printk(KERN_NOTICE "CPU serial number disabled.\n"); | |
| clear_cpu_cap(c, X86_FEATURE_PN); | |
| /* Disabling the serial number may affect the cpuid level */ | |
| c->cpuid_level = cpuid_eax(0); | |
| } | |
| } | |
| static int __init x86_serial_nr_setup(char *s) | |
| { | |
| disable_x86_serial_nr = 0; | |
| return 1; | |
| } | |
| __setup("serialnumber", x86_serial_nr_setup); | |
| /* | |
| * This does the hard work of actually picking apart the CPU stuff... | |
| */ | |
| void __cpuinit identify_cpu(struct cpuinfo_x86 *c) | |
| { | |
| int i; | |
| c->loops_per_jiffy = loops_per_jiffy; | |
| c->x86_cache_size = -1; | |
| c->x86_vendor = X86_VENDOR_UNKNOWN; | |
| c->cpuid_level = -1; /* CPUID not detected */ | |
| c->x86_model = c->x86_mask = 0; /* So far unknown... */ | |
| c->x86_vendor_id[0] = '\0'; /* Unset */ | |
| c->x86_model_id[0] = '\0'; /* Unset */ | |
| c->x86_max_cores = 1; | |
| c->x86_clflush_size = 32; | |
| memset(&c->x86_capability, 0, sizeof c->x86_capability); | |
| if (!have_cpuid_p()) { | |
| /* | |
| * First of all, decide if this is a 486 or higher | |
| * It's a 486 if we can modify the AC flag | |
| */ | |
| if (flag_is_changeable_p(X86_EFLAGS_AC)) | |
| c->x86 = 4; | |
| else | |
| c->x86 = 3; | |
| } | |
| generic_identify(c); | |
| if (this_cpu->c_identify) | |
| this_cpu->c_identify(c); | |
| /* | |
| * Vendor-specific initialization. In this section we | |
| * canonicalize the feature flags, meaning if there are | |
| * features a certain CPU supports which CPUID doesn't | |
| * tell us, CPUID claiming incorrect flags, or other bugs, | |
| * we handle them here. | |
| * | |
| * At the end of this section, c->x86_capability better | |
| * indicate the features this CPU genuinely supports! | |
| */ | |
| if (this_cpu->c_init) | |
| this_cpu->c_init(c); | |
| /* Disable the PN if appropriate */ | |
| squash_the_stupid_serial_number(c); | |
| /* | |
| * The vendor-specific functions might have changed features. Now | |
| * we do "generic changes." | |
| */ | |
| /* If the model name is still unset, do table lookup. */ | |
| if (!c->x86_model_id[0]) { | |
| char *p; | |
| p = table_lookup_model(c); | |
| if (p) | |
| strcpy(c->x86_model_id, p); | |
| else | |
| /* Last resort... */ | |
| sprintf(c->x86_model_id, "%02x/%02x", | |
| c->x86, c->x86_model); | |
| } | |
| /* | |
| * On SMP, boot_cpu_data holds the common feature set between | |
| * all CPUs; so make sure that we indicate which features are | |
| * common between the CPUs. The first time this routine gets | |
| * executed, c == &boot_cpu_data. | |
| */ | |
| if (c != &boot_cpu_data) { | |
| /* AND the already accumulated flags with these */ | |
| for (i = 0 ; i < NCAPINTS ; i++) | |
| boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; | |
| } | |
| /* Clear all flags overriden by options */ | |
| for (i = 0; i < NCAPINTS; i++) | |
| c->x86_capability[i] &= ~cleared_cpu_caps[i]; | |
| /* Init Machine Check Exception if available. */ | |
| mcheck_init(c); | |
| select_idle_routine(c); | |
| } | |
| void __init identify_boot_cpu(void) | |
| { | |
| identify_cpu(&boot_cpu_data); | |
| sysenter_setup(); | |
| enable_sep_cpu(); | |
| } | |
| void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) | |
| { | |
| BUG_ON(c == &boot_cpu_data); | |
| identify_cpu(c); | |
| enable_sep_cpu(); | |
| mtrr_ap_init(); | |
| } | |
| #ifdef CONFIG_X86_HT | |
| void __cpuinit detect_ht(struct cpuinfo_x86 *c) | |
| { | |
| u32 eax, ebx, ecx, edx; | |
| int index_msb, core_bits; | |
| cpuid(1, &eax, &ebx, &ecx, &edx); | |
| if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) | |
| return; | |
| smp_num_siblings = (ebx & 0xff0000) >> 16; | |
| if (smp_num_siblings == 1) { | |
| printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); | |
| } else if (smp_num_siblings > 1) { | |
| if (smp_num_siblings > NR_CPUS) { | |
| printk(KERN_WARNING "CPU: Unsupported number of the " | |
| "siblings %d", smp_num_siblings); | |
| smp_num_siblings = 1; | |
| return; | |
| } | |
| index_msb = get_count_order(smp_num_siblings); | |
| c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); | |
| printk(KERN_INFO "CPU: Physical Processor ID: %d\n", | |
| c->phys_proc_id); | |
| smp_num_siblings = smp_num_siblings / c->x86_max_cores; | |
| index_msb = get_count_order(smp_num_siblings) ; | |
| core_bits = get_count_order(c->x86_max_cores); | |
| c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & | |
| ((1 << core_bits) - 1); | |
| if (c->x86_max_cores > 1) | |
| printk(KERN_INFO "CPU: Processor Core ID: %d\n", | |
| c->cpu_core_id); | |
| } | |
| } | |
| #endif | |
| static __init int setup_noclflush(char *arg) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_CLFLSH); | |
| return 1; | |
| } | |
| __setup("noclflush", setup_noclflush); | |
| void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) | |
| { | |
| char *vendor = NULL; | |
| if (c->x86_vendor < X86_VENDOR_NUM) | |
| vendor = this_cpu->c_vendor; | |
| else if (c->cpuid_level >= 0) | |
| vendor = c->x86_vendor_id; | |
| if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) | |
| printk("%s ", vendor); | |
| if (!c->x86_model_id[0]) | |
| printk("%d86", c->x86); | |
| else | |
| printk("%s", c->x86_model_id); | |
| if (c->x86_mask || c->cpuid_level >= 0) | |
| printk(" stepping %02x\n", c->x86_mask); | |
| else | |
| printk("\n"); | |
| } | |
| static __init int setup_disablecpuid(char *arg) | |
| { | |
| int bit; | |
| if (get_option(&arg, &bit) && bit < NCAPINTS*32) | |
| setup_clear_cpu_cap(bit); | |
| else | |
| return 0; | |
| return 1; | |
| } | |
| __setup("clearcpuid=", setup_disablecpuid); | |
| cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; | |
| void __init early_cpu_init(void) | |
| { | |
| struct cpu_vendor_dev *cvdev; | |
| for (cvdev = __x86cpuvendor_start ; | |
| cvdev < __x86cpuvendor_end ; | |
| cvdev++) | |
| cpu_devs[cvdev->vendor] = cvdev->cpu_dev; | |
| early_cpu_detect(); | |
| } | |
| /* Make sure %fs is initialized properly in idle threads */ | |
| struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) | |
| { | |
| memset(regs, 0, sizeof(struct pt_regs)); | |
| regs->fs = __KERNEL_PERCPU; | |
| return regs; | |
| } | |
| /* Current gdt points %fs at the "master" per-cpu area: after this, | |
| * it's on the real one. */ | |
| void switch_to_new_gdt(void) | |
| { | |
| struct desc_ptr gdt_descr; | |
| gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); | |
| gdt_descr.size = GDT_SIZE - 1; | |
| load_gdt(&gdt_descr); | |
| asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); | |
| } | |
| /* | |
| * cpu_init() initializes state that is per-CPU. Some data is already | |
| * initialized (naturally) in the bootstrap process, such as the GDT | |
| * and IDT. We reload them nevertheless, this function acts as a | |
| * 'CPU state barrier', nothing should get across. | |
| */ | |
| void __cpuinit cpu_init(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| struct task_struct *curr = current; | |
| struct tss_struct *t = &per_cpu(init_tss, cpu); | |
| struct thread_struct *thread = &curr->thread; | |
| if (cpu_test_and_set(cpu, cpu_initialized)) { | |
| printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); | |
| for (;;) local_irq_enable(); | |
| } | |
| printk(KERN_INFO "Initializing CPU#%d\n", cpu); | |
| if (cpu_has_vme || cpu_has_tsc || cpu_has_de) | |
| clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); | |
| load_idt(&idt_descr); | |
| switch_to_new_gdt(); | |
| /* | |
| * Set up and load the per-CPU TSS and LDT | |
| */ | |
| atomic_inc(&init_mm.mm_count); | |
| curr->active_mm = &init_mm; | |
| if (curr->mm) | |
| BUG(); | |
| enter_lazy_tlb(&init_mm, curr); | |
| load_sp0(t, thread); | |
| set_tss_desc(cpu, t); | |
| load_TR_desc(); | |
| load_LDT(&init_mm.context); | |
| #ifdef CONFIG_DOUBLEFAULT | |
| /* Set up doublefault TSS pointer in the GDT */ | |
| __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); | |
| #endif | |
| /* Clear %gs. */ | |
| asm volatile ("mov %0, %%gs" : : "r" (0)); | |
| /* Clear all 6 debug registers: */ | |
| set_debugreg(0, 0); | |
| set_debugreg(0, 1); | |
| set_debugreg(0, 2); | |
| set_debugreg(0, 3); | |
| set_debugreg(0, 6); | |
| set_debugreg(0, 7); | |
| /* | |
| * Force FPU initialization: | |
| */ | |
| current_thread_info()->status = 0; | |
| clear_used_math(); | |
| mxcsr_feature_mask_init(); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| void __cpuinit cpu_uninit(void) | |
| { | |
| int cpu = raw_smp_processor_id(); | |
| cpu_clear(cpu, cpu_initialized); | |
| /* lazy TLB state */ | |
| per_cpu(cpu_tlbstate, cpu).state = 0; | |
| per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; | |
| } | |
| #endif |